Use of surfactants for the remediation of contaminated soils: a review

Biological machinery for the production of biosurfactant and their potential applications

The growing biotechnology industry has focused a lot of attention on biosurfactants because of several advantages over synthetic surfactants. These benefits include worldwide public health, environmental sustainability, and the increasing demand from sectors for environmentally friendly products. Replacement with biosurfactants can reduce upto 8% lifetime CO2 emissions avoiding about 1.5 million tons of greenhouse gas released into the atmosphere. Therefore, the demand for biosurfactants has risen sharply occupying about 10% (∼10 million tons/year) of the world production of surfactants. Biosurfactants' distinct amphipathic structure, which is made up of both hydrophilic and hydrophobic components, enables these molecules to perform essential functions in emulsification, foam formation, detergency, and oil dispersion-all of which are highly valued characteristic in a variety of sectors. Today, a variety of biosurfactants are manufactured on a commercial scale for use in the food, petroleum, and agricultural industries, as well as the pharmaceutical and cosmetic industries. We provide a thorough analysis of the body of knowledge on microbial biosurfactants that has been gained over time in this research. We also discuss the benefits and obstacles that need to be overcome for the effective development and use of biosurfactants, as well as their present and future industrial uses.

Surfactant-mediated bio-manufacture: A unique strategy for promoting microbial biochemicals production

Biochemicals are widely used in the medicine and food industries and are more efficient and safer than synthetic chemicals. The amphipathic surfactants can interact with the microorganisms and embed the extracellular metabolites, which induce microbial metabolites secretion and biosynthesis, performing an attractive prospect of promoting the biochemical production. However, the commonness and differences of surfactant-mediated bio-manufacture in various fields are largely unexplored. Accordingly, this review comprehensively summarized the properties of surfactants, different application scenarios of surfactant-meditated bio-manufacture, and the mechanism of surfactants increasing metabolites production. Various biochemical productions such as pigments, amino acids, and alcohols could be enhanced using the cloud point and the micelles of surfactants. Besides, the amphiphilicity of surfactants also promoted the utilization of fermentation substrates, especially lignocellulose and waste sludge, by microorganisms, indirectly increasing the metabolites production. The increase in target metabolites production was attributed to the surfactants changing the permeability and composition of the cell membrane, hence improving the secretion ability of microorganisms. Moreover, surfactants could regulate the energy metabolism, the redox state and metabolic flow in microorganisms, which induced target metabolites synthesis. This review aimed to broaden the application fields of surfactants and provide novel insights into the production of microbial biochemicals.

Surfactant foam injection for remediation of diesel-contaminated soil: A comprehensive study on the role of co-surfactant in foaming formulation enhancement

Aqueous foam injection is a promising technique for in-situ remediation of soil and aquifers contaminated by petroleum products. However, the application efficiency is strongly hindered by foam's instability upon contact with hydrocarbons. Addressing this, we propose a new binary surfactant mixture of Sodium Dodecyl Sulfate (SDS) and Cocamidopropyl Hydroxysultaine (CAHS). This study investigates CAHS's role as a co-surfactant in enhancing foam stability against antifoaming diesel oil under static and dynamic conditions. Using a dynamic foam analyzer (DFA-100), we assessed static foam's stability by monitoring decay profiles and bubble growth over time. The results revealed that the highest stability can be reached at a CAHS to SDS ratio of 50:50, increasing the half-life of the foam by 7.7 times. Remarkably, our analyses at bulk and bubble scales also elucidated the mechanisms behind the enhanced foam stability of the proposed binary surfactant mixture in the absence and presence of diesel. Additionally, in a 1D sand column, the SDS-CAHS mixture demonstrated more than twofold improvement of the Resistance Factor, attributed to the better survival of the lamellae due to the reduced rate of their destruction. This formulation also yielded a recovery improvement of >10 % compared to SDS foam. The significant improvements in stability and performance of the SDS-CAHS (50:50) mixture were credited to a robust pseudo-emulsion film formation, creating a higher oil entry barrier. This reinforcement and the surfactant molecules' synergistic interactions at the gas-liquid-oil interface significantly contributed to the overall effectiveness.

Iron slag/activated carbon-electrokinetic system with anolyte recycling for single and mixture heavy metals remediation

The electrokinetic process has been proposed for in-situ soil remediation to minimize excavation work and exposure to hazardous materials. The precipitation of heavy metals in alkaline pH near the cathode is still challenging. Reactive filter media and enhancement agents have been used in electrokinetics to enhance the removal of heavy metals. This study investigated coupling industrial iron slag waste and iron slag-activated carbon reactive filter media with electrokinetic for a single and mixture of heavy metals treatment. Instead of using acid enhancement agents, the anolyte solution was recycled to neutralize the alkaline front at the cathode, reducing the operation cost and chemical use. Experiments were conducted for 2 and 3 weeks at 20 mA electric current. Copper removal increased from 3.11 % to 23 % when iron slag reactive filter media was coupled with electrokinetic. Copper removal increased to 70.14 % in the electrokinetic experiment with iron slag-activated carbon reactive filter media. The copper removal increased to 89.21 % when the anolyte solution was recycled to the cathode compartment. Copper removal reached 93.45 % when the reactive filter media-electrokinetic process with anolyte recirculation was extended to 3 weeks. The reactive filter media- an electrokinetic process with anolyte recycling was evaluated for removing copper, nickel, and zinc mixture, and results revealed 81.1 % copper removal, 89.04 % nickel removal, and 92.31 % zinc removal in a 3-week experiment. The greater nickel and zinc removal is attributed to their higher solubility than copper. The results demonstrated the cost-effectiveness and efficiency of the electrokinetic with iron slag-activated carbon reactive filter media with anolyte recirculation for soil remediation from heavy metals.

Remediation of soils contaminated with total petroleum hydrocarbons through soil washing with surfactant solutions

Soil fulfils vital functions for life on Earth and so, just like water and air, its protection from all sources of contamination is a major concern. However, the extensive use of petroleum derived products, either as energy sources or as commodities, leads to important environmental liabilities. Ex situ soil washing is a technology to concentrate contaminants, allowing soil cleaning and the reuse of extracted petroleum derived products. This work focuses on the optimization of ex situ soil washing process using surfactants, introducing an evaluation of the washing solution recycling and its after use safe disposal, promoting the reduction of raw materials, energy and water resources costs. Two surfactants, sodium dodecyl sulphate (SDS) and polyoxyethylene sorbitan monooleate (Tween 80), were tested in the decontamination of an artificially contaminated soil with engine lubricant oil waste. The optimization of the washing conditions, such as stirring speed, liquid-solid ratio, number of washing stages, and surfactant concentration, was carried out using a design of experiments (DOE) software, so that the maximum extraction efficiency of total petroleum hydrocarbons (TPHs) was achieved. A TPH removal efficiency of (80.7 ± 3.2)% was obtained with Tween 80 after 5 h of washing and (90.7 ± 2.8)% with SDS after 2 h at 200 rpm on an orbital shaker with a liquid to solid ratio (L/S) of 15. The potential for reuse of the washing solutions was evaluated. Finally, the discharge of the washing solution was considered using activated carbon to remove the surfactants and ensure its safe disposal.

A novel bioaccessibility prediction method for complex petroleum hydrocarbon mixtures in soil

More evidence shows that bioaccessibility instead of total concentrations based on exhaustive extraction methods can better reflect the actual risk level of petroleum hydrocarbon contaminated sites, so it is essential to establish an effective assessment method for bioaccessibility. This study utilized Tenax extraction, butanol extraction, hydroxypropyl-β-cyclodextrin (HPCD) extraction, and a composite extraction method involving HPCD with LMWOAs (citric acid, CA) and surfactants (rhamnolipid, RL; Tween80, TW80; sodium dodecyl sulfate, SDS) at varying concentrations. These methods were employed to predict the bioaccessibility of earthworms to soil at different aging time of petroleum hydrocarbons. The results showed that traditional extraction methods such as Tenax 6h extraction and n-butanol extraction were ineffective in evaluating petroleum hydrocarbons' bioaccessibility. In contrast, the composite extraction of HPCD and solubilizer enhanced the extraction efficiency of HPCD greatly, and the extraction results showed a significant positive correlation with earthworm accumulation. By the comparison of the extraction results of different fractions of petroleum hydrocarbons, heavy fractions of petroleum hydrocarbons (C29-C40) are essential factors affecting chemical extraction effects. The correlation coefficients of four composite extraction methods and total petroleum hydrocarbons (TPH) of earthworm accumulation by linear regression analysis ranged from 1.1797 to 1.7990, and the slopes ranged from 0.8727 to 0.9792. Among them, the combined extraction method of 50 mmol/L HPCD and 0.5 mmol/L rhamnolipid had the best effect (r2 = 0.9792, slope = 1.1797), which could be used as an evaluation method suitable for the bioaccessibility of petroleum hydrocarbons in soil. This study could provide a new method for evaluating the bioaccessibility of organic pollutants and technically supporting risk assessment and bioremediation of complex petroleum hydrocarbons in soil.

Emerging technologies for the removal of pesticides from contaminated soils and their reuse in agriculture

Pesticides are becoming more prevalent in agriculture to protect crops and increase crop yields. However, nearly all pesticides used for this purpose reach non-target crops and remain as residues for extended periods. Contamination of soil by widespread pesticide use, as well as its toxicity to humans and other living organisms, is a global concern. This has prompted us to find solutions and develop alternative remediation technologies for sustainable management. This article reviews recent technological developments for remediating pesticides from contaminated soil, focusing on the following major points: (1) The application of various pesticide types and their properties, the sources of pesticides related to soil pollution, their transport and distribution, their fate, the impact on soil and human health, and the extrinsic and intrinsic factors that affect the remediation process are the main points of focus. (2) Sustainable pesticide degradation mechanisms and various emerging nano- and bioelectrochemical soil remediation technologies. (3) The feasible and long-term sustainable research and development approaches that are required for on-site pesticide removal from soils, as well as prospects for applying them directly in agricultural fields. In this critical analysis, we found that bioremediation technology has the potential for up to 90% pesticide removal from the soil. The complete removal of pesticides through a single biological treatment approach is still a challenging task; however, the combination of electrochemical oxidation and bioelectrochemical system approaches can achieve the complete removal of pesticides from soil. Further research is required to remove pesticides directly from soils in agricultural fields on a large-scale.

Influence of surfactant molecular features on tetracycline transport in saturated porous media of varied surface heterogeneities

This study aims to understand how surfactants affect the mobility of tetracycline (TC), an antibiotic, through different aquifer media. Two anionic and cationic surfactants, sodium dodecylbenzene sulfonate (SDBS) and cetyltrimethyl ammonium bromide (CTAB), were used to study their influence on TC mobility through clean sand and humic acid (HA)-coated sand. HA coating inhibits TC mobility due to its strong interaction with TC. Both surfactants promoted TC mobility at pH 7.0 due to competitive deposition, steric effect, and increased hydrophilicity of TC. CTAB had a more substantial effect than SDBS, related to the surfactants' molecular properties. Each surfactant's promotion effects were greater in HA-coated sand than in quartz sand due to differences in surfactant retention. CTAB inhibited TC transport at pH 9.0 due to its significant hydrophobicity effect. Furthermore, in the presence of Ca2+, SDBS enhanced TC transport by forming deposited SDBS-Ca2+-TC complexes. On the other hand, CTAB increased TC mobility due to its inhibition of cation bridging between TC and porous media. The findings highlight surfactants' crucial role in influencing the environmental behaviors of tetracycline antibiotics in varied aquifers.

Effect of cations on monochlorobenzene adsorption onto bentonite at the coexistence of Tween 80

The effect of several prevalent cations (including Na+, K+, Mg2+, Ca2+, Al3+, and Fe3+) on the adsorption of monochlorobenzene (MCB) onto bentonite was investigated at the coexistence of nonionic surfactant Tween 80 (T80) in surfactant-enhanced remediation (SER). They are all favorable for MCB and T80 adsorption, especially Mg2+ and Ca2+. Adsorption of MCB is strongly depended on T80 micelles. When its concentration exceeds the solubility, MCB is easier to bind with T80 micelles and be adsorbed by bentonite. Acidic environment can facilitate MCB and T80 adsorption, but the effect of cations on the adsorption is most significant under alkaline conditions. Adsorption capacity of MCB increases first followed by a slight decrease with increasing cations concentrations. The maximum adsorption rate of MCB determined is about 68.4% in a solution containing Mg2+ in the isothermal adsorption of MCB, while it is only 6.8% in a cation-free solution. Various characterizations showed that cations mainly changed the repulsion between bentonite particles and T80 micelles and the agglomeration and structure of bentonite, thus affecting the adsorption of MCB and T80 micelles. Our research demonstrated the nonnegligible promotion of MCB adsorption on bentonite by cations and acidic environment, which will adversely affect SER efficiency.

Marine foams impede metabolic and behavioural traits in the rough periwinkle Littorina saxatilis

Foams are a ubiquitous feature of marine environments. They can have major economic, societal and ecological consequences through their accumulation on the shore. Despite their pervasive nature and evidence that stable foam deposits play a pivotal role in the ecology of soft shore and estuaries, very limited amounts of information are available on their contribution to the structure and function at play in rocky intertidal ecosystems. This study shows that the metabolic rate of the high-shore gastropod Littorina saxatilis is significantly higher in individuals exposed to foams. Behavioural assays conducted under laboratory-controlled conditions further show that this species detects foam-born infochemicals both indirectly or directly, hence rely on both airborne and contact chemosensory cues. L. saxatilis also actively avoid areas covered in foam, and increase their activity in the presence of foam. These observations are interpreted in terms of foam-induced increased metabolic stress and increases behavioural anxiety and vigilance. They are further discussed in relation to the occurrence of two phytoplankton species known to produce repellent and/or toxic compounds such as domoic acid and dimethylsulfoniopropionate, the diatom Pseudo-nitzschia multistriata and the haptophyte Phaeocystis globosa, with the latter occurring at unusually high density. Taken together, these results suggest that the accumulation of foams on intertidal rocky shores may have major implications on taxa relying on both airborne and contact chemosensory cues to navigate, find food and mating partners. Specifically, the observed increased behavioural activity coupled with increased metabolic demands may impact species fitness and highlight potentially large ecological consequences in rocky intertidal ecosystems characterized by strong hydrodynamism and elevated organic matter content leading to the presence of long-lived foam.

Controllable chemical redox reactions to couple microbial degradation for organic contaminated sites remediation: A review

Global environmental concern over organic contaminated sites has been progressively conspicuous during the process of urbanization and industrial restructuring. While traditional physical or chemical remediation technologies may significantly destroy the soil structure and function, coupling moderate chemical degradation with microbial remediation becomes a potential way for the green, economic, and efficient remediation of contaminated sites. Hence, this work systematically elucidates why and how to couple chemical technology with microbial remediation, mainly focused on the controllable redox reactions of organic contaminants. The rational design of materials structure, selective generation of reactive oxygen species, and estimation of degradation pathway are described for chemical oxidation. Meanwhile, current progress on efficient and selective reductions of organic contaminants (i.e., dechlorination, defluorination, -NO2 reduction) is introduced. Combined with the microbial remediation of contaminated sites, several consideration factors of how to couple chemical and microbial remediation are proposed based on both fundamental and practical points of view. This review will advance the understanding and development of chemical-microbial coupled remediation for organic contaminated sites.

Emerging organic contaminants in the soil-plant-receptor continuum: transport, fate, health risks, and removal mechanisms

There is a lack of comprehensive reviews tracking emerging organic contaminants (EOCs) within the soil-plant continuum using the source-pathway-receptor-impact-mitigation (SPRIM) framework. Therefore, this review examines existing literature to gain insights into the occurrence, behaviour, fate, health hazards, and strategies for mitigating EOCs within the soil-plant system. EOCs identified in the soil-plant system encompass endocrine-disrupting chemicals, surfactants, pharmaceuticals, personal care products, plasticizers, gasoline additives, flame retardants, and per- and poly-fluoroalkyl substances (PFAS). Sources of EOCs in the soil-plant system include the land application of biosolids, wastewater, and solid wastes rich in EOCs. However, less-studied sources encompass plastics and atmospheric deposition. EOCs are transported from their sources to the soil-plant system and other receptors through human activities, wind-driven processes, and hydrological pathways. The behaviour, persistence, and fate of EOCs within the soil-plant system are discussed, including sorption, degradation, phase partitioning, (bio)transformation, biouptake, translocation, and bioaccumulation in plants. Factors governing the behaviour, persistence, and fate of EOCs in the soil-plant system include pH, redox potential, texture, temperature, and soil organic matter content. The review also discusses the environmental receptors of EOCs, including their exchange with other environmental compartments (aquatic and atmospheric), and interactions with soil organisms. The ecological health risks, human exposure via inhalation of particulate matter and consumption of contaminated food, and hazards associated with various EOCs in the soil-plant system are discussed. Various mitigation measures including removal technologies of EOCs in the soil are discussed. Finally, future research directions are presented.

Cleaning Oil-Based Drilling Cuttings with Synthetic Gemini Surfactants

The chemical cleaning method is the simplest approach for degreasing oil-based drilling cuttings (ODCs), with the effectiveness of the treatment relying mainly on the selection of the surfactant and the cleaning conditions. However, achieving the standard treatment of ODCs directly using conventional surfactants proves challenging. In light of this, this study introduces a synthesized and purified Gemini surfactant named DCY-1. The structure of DCY-1 was confirmed through Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) analyses. The characterization in this article encompasses the use of an interface tension meter, nanoparticle size analysis, scanning electron microscopy, and infrared oil measurement. The critical micelle concentration (CMC) of DCY-1 was determined to be 3.37 × 10-3 mol/L, with a corresponding γcmc value of 37.97 mN/m. In comparison to conventional surfactants, DCY-1 exhibited a larger micelle size of 4.52 nm, approximately 24.52% larger than that of SDS. Moreover, the residual oil rate of 3.96% achieved by DCY-1 was the lowest among the chemical cleaning experimental results. Through a single-factor experiment, the optimal cleaning ability of DCY-1 for ODCs was determined as follows: a surfactant concentration of 3 mmol/L, a temperature of 60 °C, an ODC/liquid mass ratio of 1:4, a cleaning duration of 40 min, and a stirring speed of 1000 rad/min. Under these optimal conditions and after merely two cleaning procedures, the residual oil content of ODCs was reduced to 1.64%, accompanied by a smooth and loose surface structure.

Migration and morphological transformation patterns of heavy metals on sludge cells and extracellular polymeric substances (EPS) under the influence of different treatments

The impediment of sludge resource utilization stems from the presence of heavy metals within the sludge matrix. To optimize heavy metal removal techniques from undried sludge, it is essential to study the distribution of heavy metals in the sludge flocs structure and the changes in morphology in the sludge cells after different treatments. In this study, the sludge was subjected to chemical treatments using citric acid (CA), EDTA, and saponin, as well as electrokinetic treatment at 2 V/cm. The distribution and migration of Cu, Ni, and Zn in sludge flocs after various treatment methods were analyzed. The heavy metals were found to migrate from intracellular to extracellular polymeric substances (EPS) without causing extensive sludge cell lysis. They gradually diffused outward with the dispersion of the EPS layer. The migration efficiency of the three heavy metals in the sludge flocs was Zn, Ni, and Cu. This was mainly related to the initial distribution and morphology of the heavy metals. Under the influence of chemicals and an electric field, the acid-soluble and reducible heavy metals in the cells partially migrated to the EPS, while the stable heavy metals transformed into an unstable state. Furthermore, the order of chemical reagents in terms of their effect on the migration efficiency of heavy metals was CA > EDTA > Saponin, owing to the varying binding strengths of heavy metals and their impact on the degree of loosening of the EPS. Especially after CA treatment a greater proportion of Cu, Ni, and Zn were transferred from the cells to the EPS. The acidification effect near the anode during electrokinetic treatment intensifies the migration of heavy metals. This study provides basic research for subsequent engineering optimization aimed at removing heavy metals from sludge.

Isolation of Diaphorobacter sp. LW2 capable of degrading Phenanthrene and its migration mediated by Pythium ultimum

Phenanthrene, one of the polycyclic aromatic hydrocarbons, is stubborn and persistent and exists widely in petroleum-contaminated soil. Filamentous fungi are good assistants to bacterial transport, by hyphae passing through soil pores and reaching further positions. An isolated bacterial strain, from the contaminated soil of the coking plant, was identified as Diaphorobacter and named LW2, which could use phenanthrene as the only carbon source and energy for its growth. LW2 could degrade phenanthrene in a wide range of pH, temperature and initial concentration. When pH was 6 and 10, the removal rate of phenanthrene was 38.59% and 76.44%, respectively, and the removal rate of phenanthrene was 68.25% at 15 ℃. And LW2 could degrade 86.64% phenanthrene when the initial concentration was 100 mg L-1. The detection of DI-N-octyl phthalate, phthalic acid and p-hydroxybenzoic acid revealed that the strain LW2 metabolised phenanthrene through the phthalic acid pathway. Meanwhile, swimming and swarming test results suggested that LW2 was motile. The auxiliary effect of Pythium ultimum on LW2 migration was assessed. In the presence of Pythium ultimum, LW2 could migrate within the range of centimters by its mycelium, which was also observed by fluorescence microscopy. Meanwhile, the degradation ability of LW2 after the migration was also explored. The results proved that the migration process had no significant effect on its degradation ability, and LW2 still showed good phenanthrene metabolism ability. This study provides more possibilities for the bioremediation of phenanthrene-contaminated soil by screening the degradation bacteria and testing the effect of fungi on its migration.

Ecological impact of surfactant Tween-80 on plankton: High-scale analyses reveal deeper hazards

The ecological risks of surfactants have been largely neglected because of their low toxicity. Multiscale studies have indicated that even if a pollutant causes no acute toxicity in a test species, it may alter interspecific interactions and community characteristics through sublethal impacts on test organisms. Therefore, we investigated the lethal and sublethal responses of the plankton species Scenedesmus quadricauda, Chlorella vulgaris, and Daphnia magna, to surfactant Tween-80. Then, high-scale responses in grazer life-history traits and stability of the D. magna-larval damselfly system were further explored. The results showed that discernible adverse effects on the growth or survival of the three plankton species were evident only at exceptionally high concentrations (≥100 mg L-1). However, 10 mg L-1 of Tween-80 notably affected the MDA concentration in grazer species, simultaneously displaying a tendency to diminish grazer's heartbeat and swimming frequency. Furthermore, Tween-80 reduced the grazer reproductive capacity and increased its predation risk by larval damselflies, which ultimately jeopardized the stability of the D. magna-larval damselfly system at much lower concentrations (10-100 fold lower) than the individual-scale responses. This study provides evidence that high-scale traits are far more sensitive to Tween-80, compared with individual-scale traits for plankton organisms, suggesting that the ecological risks of Tween-80 demand careful reassessment. SYNOPSIS: The concentration of Tween-80 needed to induce changes in community characteristics is markedly lower than that needed to produce individual-scale consequences. Thus, high-scale analyses have broad implications for understanding the hazardous effects of surfactants compared with an individual-scale analysis.

Recyclable water-modified deep eutectic solvents for removal of multiple heavy metals from soil

Removing heavy metals from soil has always been a challenge in terms of safety and effectiveness. Deep eutectic solvents (DESs) are recognized as environmentally friendly reagents with great potential in the removal of heavy metals from soil. In this study, water was introduced as a third component to form new ternary deep eutectic water solvents (DEWSs) to improve their performance. The removal capacity, applicable conditions and mechanisms of sixteen DEWSs for heavy metals were systematically investigated. Experimental results showed that the presence of water significantly enhanced the removal efficiency of three DESs (Choline chloride plus Urea, DEU; Choline chloride plus l-lactic acid, DELA; and Choline chloride plus Ethylene glycol, DEEG) for heavy metals. However, as the molar ratio of water increased, the eutectic systems in the DEWSs weakened and eventually disappeared. Under optimum conditions, DEWLA7 (DELA : H2O = 2 : 8) showed the highest removal rate for cadmium, lead, copper and zinc, which were 43.42%, 94.73%, 90.72% and 96.44%, respectively. Hydrogen bonding, adsorption of oxygen functional groups, exchangeable hydrogen substitution, changes in viscosity properties and co-precipitation all contributed to the removal of heavy metals by DEWLA7. Notably, DEWLA7 had no significant effect on the content of major minerals and nutrients in the soil. Furthermore, DEWLA7 proved to be reusable for soil washing, and still retains a high removal rate of 37.32%-83.66% after multi-stage filtration treatment. Therefore, DEWLA7 was an unexplored and excellent soil washing agent with great potential in economic and social benefits.

Effect of linear alkylbenzene sulfonate on the uptake of microcystins by Brassica oleracea and Solanum tuberosum

Background

Globally, hypereutrophic conditions in major water reservoirs used for irrigation purposes, promote the co-existence of cyanotoxins and other pollutants such as linear alkylbenzene sulfonate (LAS). LAS is known to alter the permeability of membranes and promote the uptake of other pollutants by plants. In light of the potential human health risks and prevailing hypereutrophic conditions in some catchments in South Africa, we investigated the combined effects of LAS and microcystins (MCs) on food plants when cyanobacteria infested water is used to irrigate terrestrial crops.

Methods

To understand the potential risks, pot-culture experiments were conducted to assess the effect of LAS on the accumulation of MCs in Brassica oleracea (cabbage) and Solanum tuberosum (potato) plants. The plants were watered with dam water containing 3.48 mg L -1 of the LAS (sodium dodecyl sulfate) and MCs (MC-LR: 10.47 ± 3.879; 6.158 ± 4.127 for MC-RR and 8.160 ± 2.544 for MC-YR μg L -1) for 20 days.

Results

The presence of LAS, at environmentally relevant concentrations in the irrigation water, did not enhance the uptake of MCs in the two plants, as demonstrated by statistically insignificant differences in the means of the treatments (with and without LAS). In addition, the presence of LAS, high pH, electrical conductivity (EC), and cyanotoxins in the water did not affect the total chlorophyll or the well-being of the plants. However, in some cases the levels of MCs bioaccumulated by the two plants exceeded the WHO recommended tolerable daily intake (TDI).

Conclusions

These findings imply that the tested levels of LAS and MCs did not have any synergic effects on the two plant species, but irrigating food crops with such water still poses a human health risk.

Remediation of heavily PAHs-contaminated soil with high mineral content from a coking plant using surfactant-enhanced soil washing

This study investigated the effectiveness of various surfactants at different concentrations in removing high concentrations of polycyclic aromatic hydrocarbons (PAHs) from soil with high mineral content, focusing on the impact of surfactant treatment on the mobility of the residual PAHs in soil. The results revealed that the cationic surfactant (CTMAB) inhibited removal of PAHs in the whole tested concentration range of 0.1-8 g/L. In contrast, the non-ionic and anionic surfactants (Triton X-100 and SDBS) significantly enhanced removal of PAHs as their amendment concentrations reached 2 g/L and above. Triton X-100 exhibited steadily increased efficacy with increasing amendment concentrations and maintained favorable solubilization capability when continuously amended, making it the preferable choice for remediating PAHs-contaminated soil. Surfactant and water washing processes altered soil physicochemical properties by removing some clay minerals (e.g., faujasite) and organic matter that can bind or sequester PAHs, potentially increasing their extractability and bioavailability in the washed soil, thereby posing higher ecological risks compared to the original one. Although soil washing decreased retention of the remaining PAHs in soil, it did not significantly impact PAHs release from soil by flowing water. These findings provide insights into the long-term effectiveness and ecological impacts of surfactant-enhanced washing as a potential remediation technique for PAHs-contaminated soil.

Research progress on remediation of organochlorine pesticide contamination in soil

Deteriorated soil pollution has grown into a worldwide environmental concern over the years. Organochlorine pesticide (OCP) residues, featured with ubiquity, persistence and refractoriness, are one of the main pollution sources, causing soil degradation, fertility decline and nutritional imbalance, and severely impacting soil ecology. Furthermore, residual OCPs in soil may enter the human body along with food chain accumulation and pose a serious health threat. To date, many remediation technologies including physicochemical and biological ways for organochlorine pollution have been developed at home and abroad, but none of them is a panacea suitable for all occasions. Rational selection and scientific decision-making are grounded in in-depth knowledge of various restoration techniques. However, soil pollution treatment often encounters the interference of multiple factors (climate, soil properties, cost, restoration efficiency, etc.) in complex environments, and there is still a lack of systematic summary and comparative analysis of different soil OCP removal methods. Thus, to better guide the remediation of contaminated soil, this review summarized the most commonly used strategies for OCP removal, evaluated their merits and limitations and discussed the application scenarios of different methods. It will facilitate the development of efficient, inexpensive and environmentally friendly soil remediation strategies for sustainable agricultural and ecological development.

The investigation of the binding ability between sodium dodecyl sulfate and Cu (II) in urban stormwater runoff

The simultaneous presence of heavy metals and surfactants in runoff induces complexation and ecological harm during migration. However, interactions between these pollutants are often overlooked in past studies. Thus, investigating heavy metal-surfactant complexes in runoff is imperative. In this work, Cu (II) and sodium dodecyl sulfate (SDS) were selected to investigate the interaction between heavy metals and surfactants due to the higher detected frequency in runoff. Through 1H NMR and FTIR observation of hydrogen atom nuclear displacement and functional group displacement of SDS, the change of SDS and Cu (II) complexation was obtained, and then the complexation form of Cu (II) and SDS was verified. The results showed that solution pH values and ionic strength had significant effects on the complexation of Cu (II). When the pH values increase from 3.0 to 6.0, the complexation efficiency of SDS with Cu (II) increased by 12.12% at low concentration of SDS, which may be attributed to the excessive protonation in the aqueous solution at acidic condition. The increase of ionic strength would inhibit the complexation reaction efficiency by 19.57% and finally reached the platform with concentration of NaNO3 was 0.10 mmol/L, which was mainly due to the competitive relationship between Na (I) and Cu (II). As a general filtering material in stormwater treatment measures, natural zeolite could affect the interaction between SDS and Cu (II) greatly. After the addition of SDS, the content of free Cu (II) in the zeolite-SDS-Cu (II) three-phase mixed system was significantly reduced, indicating that SDS had a positive effect on the removal of Cu (II) from runoff. This study is of great significance for investigating the migration and transformation mechanism of SDS and Cu (II) in the future and studying the control technology of storm runoff pollution.

A novel eco-friendly strategy for removing phenanthrene from groundwater: Synergism of nanobubbles and rhamnolipid

Nanobubbles (NBs), given their unique properties, could theoretically be paired with rhamnolipids (RL) to tackle polycyclic aromatic hydrocarbon contamination in groundwater. This approach may overcome the limitations of traditional surfactants, such as high toxicity and low efficiency. In this study, the remediation efficiency of RL, with or without NBs, was assessed through soil column experiments (soil contaminated with phenanthrene). Through the analysis of the two-site non-equilibrium diffusion model, there was a synergistic effect between NBs and RL. The introduction of NBs led to a reduction of up to 24.3 % in the total removal time of phenanthrene. The direct reason for this was that with NBs, the retardation factor of RL was reduced by 1.9 % to 15.4 %, which accelerated the solute replacement of RL. The reasons for this synergy were multifaceted. Detailed analysis reveals that NBs improve RL's colloidal stability, increase its absolute zeta potential, and reduce its soil adsorption capacity by 13.3 %-19.9 %. Furthermore, NBs and their interaction with RL substantially diminish the surface tension, contact angle, and dynamic viscosity of the leaching solution. These changes in surface thermodynamic and rheological properties significantly enhance the migration efficiency of the eluent. The research outcomes facilitate a thorough comprehension of NBs' attributes and their relevant applications, and propose an eco-friendly method to improve the efficiency of surfactant remediation.

Management of arsenic-contaminated excavated soils: A review

Ongoing global sustainable development and underground space utilization projects have inadvertently exposed many excavated soils naturally contaminated with geogenic arsenic (As). Recent investigations have revealed that As in certain excavated soils, especially those originating from deep construction projects, has exceeded regulatory limits, threatening the environment and human health. While numerous remediation techniques exist for treating As-contaminated soil, the unique characteristics of geogenic As contamination in excavated soil require specific measures when leachable As content surpasses established regulatory limits. Consequently, several standard leaching tests have been developed globally to assess As leaching from contaminated soil. However, a comprehensive comparative analysis of these methods and their implementation in contaminated excavated soils remains lacking. Furthermore, the suitability and efficacy of most conventional and advanced techniques for remediating As-contaminated excavated soils remained unexplored. Therefore, this study critically reviews relevant literature and summarize recent research findings concerning the management and mitigation of geogenic As in naturally contaminated excavated soil. The objective of this study was to outline present status of excavated soil globally, the extent and mode of As enrichment, management and mitigation approaches for As-contaminated soil, global excavated soil recycling strategies, and relevant soil contamination countermeasure laws. Additionally, the study provides a concise overview and comparison of standard As leaching tests developed across different countries. Furthermore, this review assessed the suitability of prominent and widely accepted As remediation techniques based on their applicability, acceptability, cost-effectiveness, duration, and overall treatment efficiency. This comprehensive review contributes to a more profound comprehension of the challenges linked to geogenic As contamination in excavated soils.

Risk assessment of toxic and hazardous metals in paddy agroecosystem by biochar-for bio-membrane applications

Toxic and carcinogenic metal (loid)s, such arsenic (As) and cadmium (Cd), found in contaminated paddy soils pose a serious danger to environmental sustainability. Their geochemical activities are complex, making it difficult to manage their contamination. Rice grown in Cd and As-polluted soils ends up in people's bellies, where it can cause cancer, anemia, and the deadly itai sickness. Solving this issue calls for research into eco-friendly and cost-effective remediation technology to lower rice's As and Cd levels. This research delves deeply into the origins of As and Cd in paddy soils, as well as their mobility, bioavailability, and uptake mechanisms by rice plants. It also examines the current methods and reactors used to lower As and Cd contamination in rice. Iron-modified biochar (Fe-BC) is a promising technology for reducing As and Cd toxicity in rice, improving soil health, and boosting rice's nutritional value. Biochar's physiochemical characteristics are enhanced by the addition of iron, making it a potent adsorbent for As and Cd ions. In conclusion, Fe-BC's biomembrane properties make them an attractive option for remediating As- and Cd-contaminated paddy soils. More efficient mitigation measures, including the use of biomembrane technology, can be developed when sustainable agriculture practices are combined with these technologies.

Effect of in situ mixed micellization of ester-functionalized gemini surfactant at different pHs on solubilization and cosolubilization of various polycyclic aromatic hydrocarbons of varying hydrophobicities

A pH controlled cleavability unfolds the 3-in-1 surfactant feature of an ester-bonded gemini surfactant, 2, 2'-[(oxybis (ethane-1,2-diyl))bis (oxy)]bis (N-hexadecyl-N,Ndimethyl-2-oxoethanaminium) dichloride (C16-C4O2-C16), by reinforcing in-situ mixed micellization between cleaved components at non-neutral pH (pH 3,12). The triplicity is assigned to two mixed-micelle variants at pH 3 and pH 12 besides the unhydrolyzed C16-C4O2-C16 at pH 7. The pH-controlled aggregation of such trichotomic surfactant dramatically enhances the micellar solubilization/cosolubilization of PAHs viz. naphthalene (Np), phenanthrene (Ph), pyrene (Py), perylene (Pe). The cosolubilization of binary/ternary PAH mixtures in such remarkable micellar assemblies at pH 3, 7 and 12 yields intriguing synergistic or antagonistic solubility outcomes correlated to PAH-PAH and PAH-micelle interactions. This study provides valuable insights into the potential applications of the ester-bonded gemini surfactant for the cosolubilization of undesirable hydrophobic compounds at natural sites having variable pH.

Copper and chromium removal from industrial sludge by a biosurfactant-based washing agent and subsequent recovery by iron oxide nanoparticles

Industrial wastewater treatment generates sludge with high concentrations of metals and coagulants, which can cause environmental problems. This study developed a sequential sludge washing and metal recovery process for industrial sludge containing > 4500 mg/kg Cu and > 5000 mg/kg Cr. The washing agent was formulated by mixing glycolipid, lipopeptide, and phospholipid biosurfactants from Weissella cibaria PN3 and Brevibacterium casei NK8 with a chelating agent, ethylenediaminetetraacetic acid (EDTA). These biosurfactants contained various functional groups for capturing metals. The optimized formulation by the central composite design had low surface tension and contained relatively small micelles. Comparable Cu and Cr removal efficiencies of 37.8% and 38.4%, respectively, were obtained after washing the sludge by shaking with a sonication process at a 1:4 solid-to-liquid ratio. The zeta potential analysis indicated the bonding of metal ions on the surface of biosurfactant micelles. When 100 g/L iron oxide nanoparticles were applied to the washing agent without pH adjustment, 83% Cu and 100% Cr were recovered. In addition, X-ray diffraction and X-ray absorption spectroscopy of the nanoparticles showed the oxidation of nanoparticles, the reduction of Cr(V) to the less toxic Cr(III), and the absorption of Cu. The recovered metals could be further recycled, which will be beneficial for the circular economy.

Natural surfactant mediated bioremediation approaches for contaminated soil

The treatment of environmental pollution by employing microorganisms is a promising technology, termed bioremediation, which has several advantages over the other established conventional remediation techniques. Consequently, there is an urgent inevitability to develop pragmatic techniques for bioremediation, accompanied by the potency of detoxifying soil environments completely. The bioremediation of contaminated soils has been shown to be an alternative that could be an economically viable way to restore polluted soil. The soil environments have long been extremely polluted by a number of contaminants, like agrochemicals, polyaromatic hydrocarbons, heavy metals, emerging pollutants, etc. In order to achieve a quick remediation overcoming several difficulties the utility of biosurfactants became an excellent advancement and that is why, nowadays, the biosurfactant mediated recovery of soil is a focus of interest to the researcher of the environmental science field specifically. This review provides an outline of the present scenario of soil bioremediation by employing a microbial biosurfactant. In addition to this, a brief account of the pollutants is highlighted along with how they contaminate the soil. Finally, we address the future outlook for bioremediation technologies that can be executed with a superior efficiency to restore a polluted area, even though its practical applicability has been cultivated tremendously over the few decades.

Microbial surfactants: characteristics, production and broader application prospects in environment and industry

Microbial surfactants are green molecules with high surface activities having the most promising advantages over chemical surfactants including their ability to efficiently reducing surface and interfacial tension, nontoxic emulsion-based formulations, biocompatibility, biodegradability, simplicity of preparation from low cost materials such as residual by-products and renewable resources at large scales, effectiveness and stabilization under extreme conditions and broad spectrum antagonism of pathogens to be part of the biocontrol strategy. Thus, biosurfactants are universal tools of great current interest. The present work describes the major types and microbial origin of surfactants and their production optimization from agro-industrial wastes in the batch shake-flasks and bioreactor systems through solid-state and submerged fermentation industries. Various downstream strategies that had been developed to extract and purify biosurfactants are discussed. Further, the physicochemical properties and functional characteristics of biosurfactants open new future prospects for the development of efficient and eco-friendly commercially successful biotechnological product compounds with diverse potential applications in environment, industry, biomedicine, nanotechnology and energy-saving technology as well.

Biosurfactant-affected mobility of oxytetracycline and its variations with surface chemical heterogeneity in saturated porous media

Herein, the influences of rhamnolipid (a typical biosurfactant) on oxytetracycline (OTC) transport in the porous media and their variations with the surface heterogeneities of the media (uncoated sand, goethite (Goe)-, and humic acid (HA)-coated sands) were explored. Compared to uncoated sand, goethite and HA coatings suppressed OTC mobility by increasing deposition sites. Interestingly, rhamnolipid-affected OTC transport strongly depended on the chemical heterogeneities of aquifers and biosurfactant concentrations. Concretely, adding rhamnolipid (1-3 mg/L) inhibited OTC mobility through sand columns because of the bridging effect of biosurfactant between sand and OTC. Unexpectedly, rhamnolipid of 10 mg/L did not further improve the inhibition of OTC transport owing to the fact that the deposition capacity of rhamnolipid reached its maximum. OTC mobility in Goe-coated sand columns was inhibited by 1 mg/L rhamnolipid. However, the inhibitory effect decreased with the increasing rhamnolipid concentration (3 mg/L) and exhibited a promoted effect at 10 mg/L rhamnolipid. This surprising observation was that the increased rhamnolipid molecules gradually occupied the favorable deposition sites (i.e., the positively charged sites). In comparison, rhamnolipid facilitated OTC transport in the HA-coated sand column. The promotion effects positively correlated with rhamnolipid concentrations because of the high electrostatic repulsion and deposition site competition induced by the deposited rhamnolipid. Another interesting phenomenon was that rhamnolipid's enhanced or inhibitory effects on OTC transport declined with the increasing solution pH because of the decreased rhamnolipid deposition on porous media surfaces. These findings benefit our understanding of the environmental behaviors of antibiotics in complex soil-water systems containing biosurfactants.

Rhamnolipid production by Pseudomonas aeruginosa (SSL-4) on waste engine oil (WEO): Taguchi optimization, soil remediation, and phytotoxicity investigation

ABSTRACTEnvironmental concerns and rising biosurfactant demand emphasize the need for this study. The objective is to maximize rhamnolipid-biosurfactant production by Pseudomonas aeruginosa (SSL-4) utilizing waste engine oil (WEO) as the sole substrate for use in soil bioremediation and commercial production. Using an L16 Taguchi orthogonal array, a signal-to-noise ratio, and an analysis of variance (ANOVA), the effects of environmental (pH, incubation temperature) and dietary parameters (carbon source concentration, carbon/nitrogen (C/N) and carbon/phosphorus (C/P) ratio) are examined. Variations of the following parameters were made within a carefully selected range: incubation temperature of 25-40℃, pH range of 5-11, WEO concentration of 1-7% (v/v), and C/N and C/P ratios of 10-40. Response variables in this batch study include surface tension reduction (mN/m), dry cell biomass (DCBM) (g/L), and rhamnolipids yield based on substrate consumption, YP/S (g/g). Rhamnolipid was synthesized under optimal conditions, providing a yield of 21.42 g/g. The oil recovery of 74.05 ± 1.481% was achieved from oil-contaminated soil at a CMC of ∼70 mg/L. FTIR, 1H NMR, and UPLC-MS techniques were utilized for the characterization of rhamnolipids, and AAS for determining heavy metals concentration in WEO and residual waste engine oil (RWEO). The Germination Index (GI) of ∼82.55% indicated no phytotoxicity associated with synthesized rhamnolipid.

Permeable reactive composite approaching cathode enhanced Cr removal in soil using the byproduct of electrokinetic technology: emphasized energy utilization efficiency

Cost-effective techniques with significant removal rates and low energy consumption are urgently required for in-situ Cr-contaminated soil remediation to reduce potential environmental toxicity to the ecosystem and human bodies. Electrokinetic technology is a valuable and promising soil remediation technology; however, the acidic and alkaline fronts evolution induced by the electrokinetic byproducts (H+, OH-) has significant hindering characteristics for ion removal. To effectively utilize the byproducts for enhancing Cr elimination, this paper proposed the permeable reactive composite approaching cathode with rhamnolipid-modified biochar as reactive material. Power utilization efficiency (η) was presented to comprehensively evaluate the target species elimination effect, considering removal rate and energy consumption. Results suggested that biosurfactant rhamnolipid stimulated Cr removal in acid and base fronts. Acid front induced rhamnolipid protonation reducing anolyte Cr(VI) to Cr(III), and base front induced rhamnolipid deprotonation complexing with Cr(III) and expediting Cr(VI) dissolution by electrostatic repulsion. Permeable reactive composite approaching cathode induced the maximum removal rate of Cr(VI) and Cr(III) in each section by impelling the alkaline front. Approaching cathode caused increased resistance and energy consumption in the near-anode regions, ultimately decreasing energy utilization efficiency. Optimized moving frequency and applied potential magnitude could adjust power consumption distribution in a single soil layer to obtain better electrokinetic removal performance of contaminates. This work provided essential scientific and practical importance for in-situ electrokinetic remediation of Cr(VI) and Cr(III), considering elimination efficiency and energy consumption in the future.

Phycoremediation potential and agar yield of red macroalgae (Gracilaria corticata) against HEDP (hydroxyethylidene diphosphonic acid) and CAPB (cocoamidopropyl betaine) detergents and the heavy metal pollutants

The discharge of raw industrial, agricultural, and domestic wastes leads to an increase in heavy metal (HM) burden and detergents in aquatic environs, which can have destructive effects on aquatic organisms. Agarophyte Gracilaria corticata, a major component of seaweed flora of the southern coast of Iran (Bushehr) that contains agar and red pigments, is one of the economically valuable red marine algae. Agar is one of the important polysaccharides with high economic value, widely used in pharmaceutical, medicinal, and cosmetic product manufacturing industries. The aim of this work was to investigate the effect of 5 HMs and two common surfactants in household and industrial detergents on the agar yield, appearance color, and the red algae's phycoremediation potential against HMs. The metal ions were Zn(II), Cu(II), Ni(II), Mn(II), and Cr(VI), and the surfactants were HEDP and CAPB. The analysis results of samples cultured for 60 days in seawater and polluted environments showed that G. corticata can accumulate copper and nickel. In the presence of detergents without HMs, the amount of extracted agar significantly increased compared to the control sample with no change in algae color. But with increasing concentration of HMs, the amount of agar in seaweed samples decreased significantly, and the algae discolored from red to dark green or yellowish-green color (signs of death in the algae). These results show that increasing of HM pollution and detergents can lead to toxicological effects and reduce the species diversity of red seaweeds in the future.

Remediation of oil-contaminated soil using Fe/Cu nanoparticles and biosurfactants

Oil (or petroleum), consisting of a mixture of hydrocarbons, can leak from oil exploration, production, and use. Due to their complex mixture and interaction with the subsurface soil and water, they are hard to treat and can become a significant environmental concern. Rhamnolipid and sophorolipid biosurfactants, biologically produced surfactants, can be used to remove petroleum hydrocarbons. Nanoparticles have gained attention as promising materials for soil remediation. In this study, suspensions of Fe-Cu nanoparticles and biosurfactants were employed for the remediation of oil-contaminated soil. The results showed that these suspensions displayed a high oil removal rate from contaminated soil, which followed the first-order reaction. For batch experiments, the oil remediation efficiency was up to 84%. Optimum conditions to achieve the highest oil remediation performance included a rhamnolipid biosurfactant: nanoparticle ratio of 10:1 (wt%: wt%), pH 7, room temperature, and shaking speed of 60 rpm for 60 min. The remediation rate was improved by higher temperature and lower ionic strength. In the presence and absence of nanoparticles, rhamnolipid biosurfactant demonstrated a higher remediation efficiency than sophorolipid biosurfactant and ultraplex surfactant. The presence of other surfactants decreased the treatment productivity by 9-14% compared to using only rhamnolipid biosurfactant. Nanoparticles were reused with a remediation efficiency of 59% after three cycles by rhamnolipid biosurfactant. These results suggested that biosurfactants/Fe-Cu nanoparticle suspension showed promise for the remediation of oil-contaminated soil.

Biotechnological potential of microbial bio-surfactants, their significance, and diverse applications

Globally, there is a huge demand for chemically available surfactants in many industries, irrespective of their detrimental impact on the environment. Naturally occurring green sustainable substances have been proven to be the best alternative for reducing reliance on chemical surfactants and promoting long-lasting sustainable development. The most frequently utilized green active biosurfactants, which are made by bacteria, yeast, and fungi, are discussed in this review. These biosurfactants are commonly originated from contaminated sites, the marine ecosystem, and the natural environment, and it holds great potential for environmental sustainability. In this review, we described the importance of biosurfactants for the environment, including their biodegradability, low toxicity, environmental compatibility, and stability at a wide pH range. In this review, we have also described the various techniques that have been utilized to characterize and screen the generation of microbial biosurfactants. Also, we reviewed the potential of biosurfactants and its emerging applications in the foods, cosmetics, pharmaceuticals, and agricultural industries. In addition, we also discussed the ways to overcome problems with expensive costs such as low-cost substrate media formulation, gravitational techniques, and solvent-free foam fractionation for extraction that could be employed during biosurfactant production on a larger scale.

Effect of surfactants on the sorption-desorption, degradation, and transport of chlorothalonil and hydroxy-chlorothalonil in agricultural soils

The fungicide chlorothalonil (CTL) and its metabolite hydroxy chlorothalonil (OH-CTL) constitute a risk of soil and water contamination, highlighting the need to find suitable soil remediation methods for these compounds. Surfactants can promote the bioavailability of organic compounds for enhanced microbial degradation, but the performance depends on soil and surfactant properties, sorption-desorption equilibria of contaminants and surfactants, and possible adverse effects of surfactants on microorganisms. This study investigated the influence of five surfactants [e.g., Triton X-100 (TX-100), sodium dodecyl sulphate (SDS), hexadecyltrimethylammonium bromide (HDTMA), Aerosol 22 and Tween 80] on the sorption-desorption, degradation, and mobility of CTL and OH-CTL in two volcanic and one non-volcanic soil. Sorption and desorption of fungicides depended on the sorption of surfactants on soils, surfactants' capacity to neutralize the net negative charge of soils, surfactants' critical micellar concentration, and pH of soils. HDTMA was strongly adsorbed on soils, which shifted the fungicide sorption equilibria by increasing the distribution coefficient (K_d) values. Contrarily, SDS and TX-100 lowered CTL and OH-CTL sorption on soils by decreasing the K_d values, which resulted in an efficient extraction of the fungicide compounds from soil. SDS increased the degradation of CTL, especially in the non-volcanic soil (DT₅₀ values were 14 and 7 days in natural and amended soils, with final residues <7% of the initial dose), whereas TX-100 enabled an early start and sustenance of OH-CTL degradation in all soils. CTL and OH-CTL stimulated soil microbial activities without noticeable deleterious effects of the surfactants. SDS and TX-100 also reduced the vertical transport of OH-CTL in soils. Results of this study could be extended to soils in other regions of the world because the tested soils represent widely different physical, chemical, and biological properties.

Groundwater and soil contamination by LNAPL: State of the art and future challenges

Contamination by Light Non-Aqueous Phase Liquids (LNAPL) represents a challenge due to the difficulties encountered in its underground assessment and recovery. The major risks arising from subsoil LNAPL accumulation face human health and environment, gaining a social relevance also in the frame of a continuously changing climate. This paper reports on a literature review about the underground contamination by LNAPL, with the aims of providing a categorization of the aspects involved in this topic, analyzing the current state of the art, underlying potential lacks and future perspectives. The review was focused on papers published in the 2012-2022 time-interval, in journals indexed in Scopus and WoS databases, by querying "LNAPL" within article title, abstract and/or key words. 245 papers were collected and classified according to three "key approaches" -namely laboratory activity, field based-data studies and mathematical simulations- and subordinate "key themes", so to allow summarizing and commenting the main aspects based on the application setting, content and scope. Results show that there is a wide experience on plume dynamics and evolution, detection and monitoring through direct and indirect surveys, oil recovery and natural attenuation processes. Few cues of innovations were found regarding both the use of new materials and/or specific field configuration for remediation, and the application of new techniques for plume detection. Some limitations were found in the common oversimplification of the polluted media in laboratory or mathematical models, where the contamination is set within homogeneous porous environments, and in the low number of studies focused on rock masses, where the discontinuous hydraulic behavior complicates the address and modeling of the issue. This paper represents a reference for a quick update on the addressed topic, along with a starting point to develop new ideas and cues for the advance in one of the greatest environmental banes of the current century.

Tween 80 assisted washing ciprofloxacin-contaminated soil, and recycled it using active chlorines

Active chlorines (ACs) can selectively oxidize contaminants with benzene rings to recycle surfactants, which greatly facilitates the resource cycle. This paper firstly utilized Tween 80 to assist in ex-situ washing the ciprofloxacin (CI) contaminated soil, including the solubilization experiment, shake washing and soil column washing, all of which showed that 2 g/L of Tween 80 (TW 80) was the most effective in removing CI. Then electrochemically treated the collected soil washing effluent (SWE) at 10 V with an electrolyte of 20 mM NaCl + 10 mM Na₂SO₄; Pre-experiments screened the range of electrode spacing, pH and temperature, based on which an orthogonal design Table L₉ (3⁴) was designed. Visual analysis and ANOVA were performed on the ciprofloxacin removal efficiency and Tween 80 retention efficiency during the orthogonal experiments in 9 groups, and the results showed that CI was usually degraded within 30 min, and 50% of TW 80 was still present at the end of the experiment, and there was no significant effect of all three factors. LC-MS demonstrated that CI was mainly degraded synergistically by ·OH and ACs, and ·OH effectively reduced the biotoxicity of the SWE, so the mixed electrolyte may be more suitable for the electrochemical recycling system of ACs. This paper conducted the washing remediation study of CI-contaminated soil for the first time, and applied the theory of selective oxidation by ACs on benzene ring to treat the SWE, which provides a new treatment idea for antibiotic-contaminated soil.

Nutritional additives dominance in driving the bacterial communities succession and bioremediation of hydrocarbon and heavy metal contaminated soil microcosms

Soil quality and microbial diversity are essential to the health of ecosystems. However, it is unclear how the use of eco-friendly natural additives can improve the quality and microbial diversity of contaminated soils. Herein, we used high-throughput 16 S rDNA amplicon Illumina sequencing to evaluate the stimulation and development of microbial diversity and concomitant bioremediation in hydrocarbon (HC) and heavy metal (HM)-rich waste disposal site soil when treated with meat and bone meal (MBM), cyclodextrin (Cdx), and MBM and cyclodextrin mixture (Cdx MBM) over a period of 3 months. Results showed that natural additive treatments significantly increased the soil bacterial diversity (higher Shannon index, Simpson index and evenness) in a time-dependent manner, with Cdx eliciting the greatest enhancement. The two additives influenced the bacterial community succession patterns differently. MBM, while it enhanced the enrichment of specific genera Chitinophaga and Terrimonas, did not significantly alter the total bacterial community. In contrast, Cdx or Cdx MBM promoted a profound change of the bacteria community over time, with the enrichment of the genera Parvibaculum, Arenimonas and unclassified Actinobacteria. These results provide evidence on the involvement of the two natural additives in coupling HC and HM bioremediation and bacterial community perturbations, and thus illustrates their potential application in ecologically sound bioremediation technologies for contaminated soils.

Remedial effect and operating status of a decommissioned uranium mill tailings (UMT) repository: A micro-ecological perspective based on bacterial community

From a radioecological perspective, increasing attention has been paid to the long-term stabilisation of decommissioned uranium mill tailings (UMT) repositories. However, little is known about the evaluation of decommissioning and remedial effects of UMT repositories from a microecological perspective based on bacterial communities. Here, we analysed the distribution and structure of soil community assemblies along different vertical soil profiles in a decommissioned UMT repository and explored the impact of soil properties, including physicochemical parameters, metal(loid)s, and radionuclides, on the bacterial assemblage. We found that the α diversity of the bacterial community was unaffected by variations in different soil profiles and taxa were classified at the phylum level with small significant differences. In contrast, the bacterial community structure in and around the UMT repository showed significant differences; however, this difference was significantly affected by soil metal(loid)s and physicochemical properties rather than soil radionuclides. In addition, seven bacterial genera with significant differences between the inner and surrounding regions of the repository could be used as potential indicators to further investigate the remedial effects on soil environmental quality. These findings provide novel insights into the construction of an assessment system and in situ biomonitoring of UMT repositories from a microecological perspective based on bacterial communities.

CO2-Repurification Microemulsion Detergent for Oil-Based Slurry Cleaning

In order to solve problems such as environmental pollution and pipeline blockage caused by oily wastewater after washing, N,N-dimethylcyclohexylamine (DMCHA) with CO₂ response was selected as the oil phase, and an O/W microemulsion wellbore cleaning fluid with CO₂ switching characteristics was successfully prepared with erucamide propyl betaine (EAB-40), sodium dodecyl benzene sulfonate (SDBS), n-butanol, silicone defoamer, and water. The water content of the microemulsion was 89.99%, and it had good stability at 40 and -5 °C. The emulsion was rapidly demulsified after being injected with CO₂ in the CO₂-repurification microemulsion detergent, and CO₂ was removed with a N₂ detergent. The emulsion was restored to its original state, which demonstrated the CO₂/N₂ switching properties of the emulsion. It is proven that the switching microemulsion has a good wetting transformation ability by cleaning the steel sheet and quartz sheet contaminated by oil-based slurry. The switching microemulsion system can clean the simulated wellbore contaminated by oil-based slurry, and the cleaning efficiency is above 99%. CO₂ can be used at room temperature to separate oil and water from oily wastewater after cleaning.

Regulating the reaction pathway of nZVI to improve the decontamination performance through magnetic spatial confinement effect

Nanoscale zero-valent iron (nZVI) shows high effectiveness in the catalyzed removal of contaminants in wastewater treatment. However, the uncontrolled interfacial electron transfer behavior and formation of surface iron oxide (FeOx) layer led to severe electron wasting and occasionally form highly toxic intermediates. Here, we constructed magnetic mesoporous SiO₂ shell on surface of nZVI to stimulate a magnetic spatial confinement effect and regulate the electron transfer pattern. Therein, Fe atom facilely spread out from the nZVI core, orderly release electron to surface adsorbed H₂O molecule, which is efficiently transformed into active hydrogen (H*). Meanwhile, in-situ Raman revealed that Fe atoms were involved in the formation of penetrable γ-FeOOH rather than FeOx layer, enabling the continuous inward diffusion of H₂O and outward diffusion of H* . Employing the catalyzed removal of halogenated phenols as demo reaction, the presence of magnetic mesoporous SiO₂ shell utilized the reaction between electrons and H₂O to switch the reaction pathway from the reduction/oxidation hybrid process to hydrodehalogantion, and increased the conversion of halogenated phenols-to-phenols by 5.53 times. This study shows the forehand of improving the decontamination performance of nZVI through sophisticated designed surface coating, as well as fine regulating the environmental behavior of magnetic material via micro-magnetic field.

Treatment of Motor Oil-Contaminated Soil with Green Surfactant Using a Mobile Remediation System

Leak of fuels and lubricants occurring during exploration, distribution, refining and storage operations is the major cause of environmental pollution due to petroderivatives dispersion. The quick use of a series of physicochemical and biological techniques is needed to drastically reduce the magnitude of damage provoked by these pollutants. Among them, soil washing proved to be an effective alternative to the remediation of hydrocarbon-polluted sites, mainly if combined with surfactant utilization. However, the direct use of surfactants can lead to problems related to the toxicity and dispersion of the resulting by-products, as the majority of marketed surfactants are produced from oil derivatives. In this context, green surfactants appear as a promising alternative to their synthetic counterpart. In the present study, two green surfactants, i.e., a chemically synthesized biobased surfactant and a Starmerella bombicola biosurfactant, were applied in soil decontamination tests using a concrete mixer-type Mobile Soil Remediation System (MSRS). The system was designed and developed with 3D printing based on bench-scale results. A commercial biosurfactant was formulated based on the microbial surfactant, which was compared with the biobased surfactant in various experimental conditions. A set of factorial designs combined with Response Surface Methodology was used to select the optimal conditions for pollutant removal using the prototype. The following variables were tested: Surfactant type, Surfactant volume, Surfactant dilution, Contaminant concentration, Soil type, Soil mass, Washing duration, Tank tilt angle, Mixing speed, and Type of basket. Under the optimized experimental condition, the commercial biosurfactant allowed to remove 92.4% of the motor oil adsorbed in the sand. These results demonstrate the possibility of using natural surfactants and the development of novel mechanical technologies to degrade hydrocarbons with economic earnings for oil industry.

Broad-Spectrum Antifungal, Biosurfactants and Bioemulsifier Activity of Bacillus subtilis subsp. spizizenii-A Potential Biocontrol and Bioremediation Agent in Agriculture

In this study, the antifungal, biosurfactant and bioemulsifying activity of the lipopeptides produced by the marine bacterium Bacillus subtilis subsp. spizizenii MC6B-22 is presented. The kinetics showed that at 84 h, the highest yield of lipopeptides (556 mg/mL) with antifungal, biosurfactant, bioemulsifying and hemolytic activity was detected, finding a relationship with the sporulation of the bacteria. Based on the hemolytic activity, bio-guided purification methods were used to obtain the lipopeptide. By TLC, HPLC and MALDI-TOF, the mycosubtilin was identified as the main lipopeptide, and it was further confirmed by NRPS gene clusters prediction based on the strain's genome sequence, in addition to other genes related to antimicrobial activity. The lipopeptide showed a broad-spectrum activity against ten phytopathogens of tropical crops at a minimum inhibitory concentration of 400 to 25 μg/mL and with a fungicidal mode of action. In addition, it exhibited that biosurfactant and bioemulsifying activities remain stable over a wide range of salinity and pH and it can emulsify different hydrophobic substrates. These results demonstrate the potential of the MC6B-22 strain as a biocontrol agent for agriculture and its application in bioremediation and other biotechnological fields.

High performance self-assembled nano-chlorapatite in the presence of lactonic sophorolipid for the immobilization of cadmium in polluted sediment

A novel lactonic sophorolipid (LS) self-assembled nano-chlorapatite (LS-nClAP) was prepared for the immobilization of severe cadmium (Cd) in sediment. The experimental results indicated that the introduction of LS not only improved the dispersed performance of chlorapatite, but also brought massive hydroxyl and carboxyl groups, which significantly improved the immobilization efficiency of Cd and reduced its eco-toxicity in sediment. LS can significantly increase the effective utilization rate of phosphorus in chlorapatite, and reduce the content of available phosphorus (AP) by half after remediation compared with ClAP. Additionally, the participation of LS possessed a significant impact on the enzyme activities in the sediment, especially for urease, which was closely related to the effective stability of Cd and the introduction of LS. All experimental results of this study provided new insights into the possible effects of Cd immobilization by chlorapatite in contaminated sediments, demonstrating great application potential for sediment remediation in the future.

Removal of Cd from contaminated farmland soil by washing with residues of traditional Chinese herbal medicine extracts

Soil washing is one of the effective methods for permanent removal of heavy metals from farmland soil, and selection of washing agents determines heavy metal removal efficiency. However, there is still a lack of cost-efficient and eco-friendly washing agents. In this study, three residues of traditional Chinese herbal medicine (RTCHM) extracts: residues of Prunus mume (Sieb.) Sieb. et Zucc. (RPM), residues of Schisandra chinensis (Turcz.) Baill. (RSC), and residues of Crataegus pinnatifida Bunge (RCP), were tested for their potential of Cd removal. The variations in amounts and compositions of dissolved organic carbon (DOC) and citric acid were responsible for the difference in Cd removal efficiencies of RTCHM extracts. Fourier-transform infrared spectrophotometer (FTIR) analysis showed that hydroxyl, carboxyl, and amine were the main functional groups of RTCHM extracts to chelate with heavy metals. The optimum conditions for RTCHM extracts were 100 g L^-1 concentration, solid-liquid ratio 1:10, pH 2.50, and contact time of 1 h, and the highest Cd removal efficiencies of RPM, RSC, and RCP extracts reached 35%, 11%, and 15%, respectively. The ecological risk of Cd decreased significantly due to the decrease of exchangeable and reducible Cd fractions. RTCHM extracts washing alleviated soil alkalinity and had little effect on soil cation exchange capacity. Meanwhile, the concentrations of soil organic matter and nitrogen were enhanced significantly by RPM extracts and the activities of soil catalase and urease were also improved. Overall, among the tested extracts, RPM extracts was a much more feasible and environment-friendly washing agent for the remediation of Cd-contaminated farmland soil.

Hydrodynamically-enhanced transfer of dense non-aqueous phase liquids into an aqueous reservoir

The use of surfactants represents a viable strategy to boost the removal yield of Dense Non-Aqueous Phase Liquids (DNAPLs) from groundwater and to shorten the operational timing of the remediation process. Surfactants, in general, help in reducing the interfacial tension at the DNAPL/water interface and enhance the solubility of the pollutant in the water phase through the formation of dispersed systems, such as micelles and emulsions. In this paper, we show that a suitable choice of a surfactant, in this case belonging to the bio-degradable class of ethoxylated alcohols, allows for the formation of hydrodynamic interfacial instabilities that further enhances the dissolution rate of the organic pollutant into the water phase. In a stratified configuration (denser organic phase at the bottom and lighter water phase on top), the instabilities appear as upward-pointing fingers that originate from the inversion of the local density at the interface. This inversion stems from the synergetic coupling of two effects promoted by the ethoxylated surfactant: i) the enhanced co-solubility of the DNAPL into the water (and viceversa), and (ii) the differential diffusion of the DNAPL and the surfactant in the aqueous phase. By dissolving into the DNAPL, the surfactant also reduces locally the surface tension at the liquid-liquid interface, thereby inducing transversal Marangoni flows. In our work, we carefully evaluated the effects of the concentration of different surfactants (two different ethoxylated alcohols, sodium dodecylsulphate, cetyltrimethyl ammonium bromide, N-tetradecyl-N, N-dimethylamine oxide and bis(2-ethylhexyl) sulfosuccinate sodium salt) on the onset of the instabilities in 3 different DNAPLs/water stratifications, namely chloroform, trichloroethylene and tetrachloroethylene, with a special emphasis on the trichloroethylene/water system. By means of a theoretical model and nonlinear simulations, supported by surface tension, density and diffusivity measurements, we could provide a solid explanation to the observed phenomena and we found that the type of the dispersed system, the solubility of the DNAPL into the water phase, the solubility of the surfactant in the organic phase, as well as the relative diffusion and density of the surfactant and the DNAPL in the aqueous phase, are all key parameters for the onset of the instabilities. These results can be exploited in the most common remediation techniques.

Review of the application of surfactants in microemulsion systems for remediation of petroleum contaminated soil and sediments

Microemulsions are important for soil and sediment remediation technology. The characteristics of the surfactants that make up these microemulsions include low sorption into soil or sediments, low surface and interfacial tension, the ability to penetrate tiny pores, and good solubilization of contaminants. This review revealed that microemulsions formulated with nonionic and anionic surfactants have higher recovery efficiencies for hydrophobic contaminants than cationic ones, as evidenced by the surveyed studies reporting effective remediation of soils and sediments using on microemulsions. These microemulsified systems have been found to remove petroleum and its derivatives from soil or sediments at percentages ranging from 40 to 100%. As such, this review can aid with the choice of surfactants used in microemulsions for remediation, such as those with plant-based components, which are promising solutions for the remediation of contaminated soils due to their contaminant extraction efficiency and biodegradability.

On the potentials of sialic acid derivatives as inhibitors for the mumps virus: A molecular dynamics and quantum chemistry investigation

Mumps virus is an infectious pathogen causing major health problems for humans such as encephalitis, orchitis, and parotitis. Therefore, designing an inhibitor for this virus is of great medical and public health importance. With this goal in mind, we investigate the affinity of different sialic acid-based compounds (ligands) against the hemagglutinin-neuraminidase (HN) protein of the mumps virus, using a combination of molecular dynamics (MD) simulations and quantum chemistry calculations. Our MD simulation results indicate that the ligands form stable complexes with the HN protein through a combination of electrostatic, van der Waals (vdW), and hydrogen bond (H-bond) interactions, which the electrostatic interactions play a more important role in the complexation process. Based on the obtained results from the structural analysis Arg381, Arg291, and Arg49 play a key role in the binding site interactions with the different ligands, in comparison with other residues. There are some candidates such as Neu5Acα2-6Galβ1-4GlcNAcβ, Neu5Acα2-3Galβ1-3GlcNacβ1-3Galβ1-4Glc, and Neu5Acα2-6Galβ1-4GlcNAcβ1-3Galβ1-4Glc that form more stable complexes with the HN than the α2-3-Sialyllactose confirmed by the calculated Gibbs binding energies (-39.65, -46.93, and -36.49 kcal.mol^-1, respectively). To investigate the relationship between the molecular properties of the selected compounds and their affinity to the HN receptor, density functional theory dispersion corrected (DFT-D3) calculations were employed. According to our DFT-D3 results, neutral sialic acid-based compounds have lower reactivity to the mumps virus than the negativity charge structures. Moreover, by increasing the electronic chemical potential (μ) the vdW and H-bond interactions between drugs and the HN protein increase. In other words, by elevating the electron tendency of the selected ligands their affinity to the mumps virus increases. Our quantum chemistry calculations reveal that in addition to the structural features the molecular properties of the drugs can play important roles in their affinity and reactivity against the virus. The results of this study can provide useful details to design new compounds or improve their properties against the mumps virus.

Synthesis and Surface Properties of Photoresponsive Gemini Surfactants: Implication for Remediating PAHs-Contaminated Groundwater

The efficient utility of surfactants remains a daunting task for groundwater remediation. In this study, we have synthesized a conventional photoresponsive surfactant 4-[4-[(4-butylphenyl)azo]phenoxy]butyldimethylethylammonium bromide (AzoPB) and a gemini photoresponsive surfactant N¹,N²-bis[4-[4-[(4-butylphenyl)azo]phenoxy]butyl]-N¹,N²-tetramethylethane-1,2-diammonium bromide (AzoPBT) for solubilizing PAHs in groundwater. The two surfactants' photosensitivity, surface properties, and solubilization/release ability for phenanthrene (Phe) and acenaphthylene (Ace) were studied in detail. Under UV-light irradiation for 15-20 s, the two surfactants can be converted from trans to cis, while cis-to-trans isomerization can be achieved under visible-light irradiation for 1 min. Compared to AzoPB, AzoPBT exhibited strong surface properties such as lower critical micelle concentration (0.52 mM), surface tension (γ, 28.94 mN·m^-1), minimum area (A_min, 1.72 × 10^-8 nm²), and higher maximum adsorption (Γ_max, 96.55 mol·m^-2). The solubility of Phe and Ace in the AzoPBT aqueous solution (12.84 and 14.27 mg/L) was much higher than that in the AzoPB aqueous solution (7.51 and 8.77 mg/L) and gradually increased as the surfactant concentration increased in both aqueous solutions. Compared to AzoPB, gemini surfactant AzoPBT exhibited stronger solubilization ability. After four cycles of cis-trans isomerization conversion, AzoPBT could still reduce the hydrophobicity of Phe in natural groundwater, although the solubility of Phe decreased slightly. Additionally, the release capacity of AzoPBT was significantly higher than that of AzoPB during the cyclic solubilization-release process. The results indicated that gemini photoresponsive surfactants should be preferable to conventional photoresponsive surfactants for groundwater remediation due to their higher solubilization and release efficiency for Phe in the cyclic solubilization and release process, which can improve repair efficiency, minimize secondary pollution, and reduce remediation costs.

Efficient degradation of trichloroethene with the existence of surfactants by peroxymonosulfate activated by nano-zero-valent iron: performance and mechanism investigation

In this study, the degradation of trichloroethylene (TCE) with the existence of tween-80 (TW-80) or sodium dodecyl sulfate (SDS) using peroxymonosulfate (PMS) activated by nano-zero-valent iron (nZVI) was investigated. Over 87.6% TCE (with 1.3 g L^-1 TW-80 presence) was degraded by 0.9 mM PMS and 0.12 g L^-1 nZVI, while 89.7% TCE (with 2.3 g L^-1 SDS presence) was degraded by 1.2 mM PMS and 0.20 g L^-1 nZVI, in which more than 71.9% TCE with TW-80 existence and 87.5% TCE with SDS existence were dechlorinated. Besides, the effects of some factors (i.e., PMS and nZVI dosages, initial solution pH, and inorganic anions) on TCE removal were evaluated. The degradation of TCE was restrained continuously with increasing surfactant concentration, and TW-80 was more easily decomposed than SDS in PMS/nZVI system. Furthermore, sulfate radical (SO₄^-•) and hydroxyl radical (HO•) were demonstrated the main reactive oxygen species (ROS) contributing to TCE degradation and SO₄^-• played a dominant role through EPR tests and ROS scavenging experiments. Finally, the results of TCE degradation in actual groundwater confirmed that PMS/nZVI process has great advantages and potential in remediation of actual TCE-contaminated groundwater with TW-80 or SDS existence.