Water depollution using metal-organic frameworks-catalyzed advanced oxidation processes: A review

Controllable Preparation of a Cu NCs@Zn-MOF Hybrid with Dual Emission Induced by an Ion Exchange Strategy for the Detection of Explosives

The precise synthesis of Cu NCs is a highly desirable and controllable route for the preparation of desired structures and properties, which facilitates the rational design of valuable probes for fluorescence sensing and the understanding of structure-property relationships. Herein, an ion-exchange strategy combined with a bottom-up synthetic approach was utilized in the synthesis process of Cu NCs for the first time, which achieved the controllable synthesis of Cu NCs and in situ anchoring of Cu NCs on the support material HPU-14. The as-prepared Cu NCs@HPU-14-4h not only had a good peroxidase-like property but also exhibited stable dual-emitting fluorescence at 470 and 620 nm. Notably, the peroxidase-like property endowed Cu NCs@HPU-14-4h with the capability of highly sensitive colorimetric detection of H2O2 in a linear concentration from 0.1 to 140 μM (detection limit of 86.7 nM), and a change in the fluorescent color from red to blue could be observed by the naked eye. Furthermore, due to the large overlap between the absorption of 2,4,6-trinitrophenol (TNP) and the excitation band of Cu NCs@HPU-14-4h, TNP could also be detected from 27 types of analogs and common ions with a limit of detection of 68 nM. Finally, a portable hydrogel probe with efficient wipe sampling was fabricated by polyvinyl alcohol (PVA) comprising Cu NCs@HPU-14-4h with the aim of on-site visualization of different explosives. Consequently, the current study not only provides a new idea for the precise synthesis of Cu NCs and their controllable anchoring on support materials but also offers an effective method for predicting H2O2 and TNP.

Full-spectrum plasmonic semiconductors for photocatalysis

Localized surface plasmon resonance (LSPR) of noble metal nanoparticles can focus surrounding light onto the particle surface to boost photochemical reactions and solar energy utilization. However, the rarity and high cost of noble metals limit their applications in plasmonic photocatalysis, forcing researchers to seek low-cost alternatives. Recently, some heavily doped semiconductors with high free carrier density have garnered attention due to their metal-like LSPR properties. However, plasmonic semiconductors have complex surface structures characterized by the presence of a depletion layer, which poses challenges for active site exposure and hot carrier transfer, resulting in low photocatalytic activity. In this review, we introduce the essential characteristics and types, synthesis methods, and characterization techniques of full-spectrum plasmonic semiconductors, elucidate the mechanism of full-spectrum nonmetallic plasmonic photocatalysis, including the local electromagnetic field, hot carrier generation and transfer, the photothermal effect, and the solutions for the surface depletion layer, and summarize the applications of plasmonic semiconductors in photocatalytic environmental remediation, CO2 reduction, H2 generation, and organic transformations. Finally, we provide a perspective on full-spectrum plasmonic photocatalysis, aiming to guide the design and development of plasmonic photocatalysts.

The effect of UV365/Fenton process on the removal of gaseous ethylbenzene in a bubble column reactor

As volatile organic compounds (VOCs), gaseous ethylbenzene has adverse effects on human health and ecology. Therefore, an effective degradation process is highly desirable. The Fenton process under UV 365 nm was selected as the first option to remove gaseous ethylbenzene in a bubble column reactor. The main parameters for the batch experiments were systematically studied, including H2O2 concentration, [H2O2]/[Fe2+], pH, UV wavelength, UV intensity, gaseous ethylbenzene concentration, gas flow rate, and process stability towards removal efficiency. The optimum conditions were found to be H2O2 concentration of 100 mmol·L-1, [H2O2]/[Fe2+] of 4, pH of 3.0, UV wavelength of 365 nm, UV power of 5 W, gas flow rate of 900 mL·min-1, and gaseous ethylbenzene concentration of 30 ppm, resulting in a removal efficiency of 76.3%. The study found that the Fenton process, when coupled with UV 365 nm, was highly effective in removing gaseous ethylbenzene. The degradation mechanism of gaseous ethylbenzene was proposed in the UV365/Fenton process based on EPR, radical quenching experiments, iron analysis, carbon balance, and GC-MS analysis. The results indicated that •OH played a crucial role in the process.

Fabrication of an Fe-Doped ZIF-67 Derived Magnetic Fe/Co/C Composite for Effective Removal of Congo Red

The dyes in printing and dyeing wastewater are harmful to the human body and the environment. It is essential to develop practical and effective adsorbents to deal with them. In this study, an Fe-doped, ZIF-67 derived Fe/Co/C composite material with strong magnetism was successfully synthesized. The effects of pH, initial concentration, and adsorption time on the properties of the adsorbent were investigated. To further improve the removal efficiency and enhance the practicality, potassium peroxymonosulfate (PMS) was added to the system due to its Fenton-like effect. Then, an Fe/Co/C composite was used with PMS to remove Congo red (CR) with a 98% removal of 250 mg·L-1. Moreover, for its high saturation magnetization of 85.4 emu·g-1, the Fe/Co/C composite can be easily recovered by applying a magnetic field, solving the problem that powdery functional materials are difficult to recover and, thus, avoiding secondary pollution. Furthermore, since the composite material was doped before carbonization, this synthetic strategy is flexible and the required metal elements can be added at will to achieve different purposes. This study demonstrates that this Fe-doped, ZIF-67 derived magnetic material has potential application prospects for dye adsorption.

Rational construction of visible-light-driven perylene diimides/Fe2O3@C derived from MIL-88A (Fe) heterojunction with S-scheme electron transfer pathway to activate peroxymonosulfate for degradation of antibiotics

The novel composite photocatalytic material perylene diimides/Fe2O3@C (PDIs/Fe2O3@C) was constructed by a simple hydrothermal-calcination method and an oil bath method. 20 % PDIs/Fe2O3@C displayed a 16.4-fold increase in the rate of tetracycline (TC) removal over Fe2O3@C at 8 min. The main factor that enhanced photocatalytic performance was due to the combination of PDIs with Fe2O3@C, which effectively improved the phenomenon during the self-assembly of highly agglomerative PDIs, increased the specific surface area of Fe2O3@C, exposed more reaction sites, and promoted the activation of peroxymonosulfate (PMS) by Fe2+/Fe3+; and secondly, the composite of two different materials, both organic and inorganic, which effectively promoted the photogenerated electron transfer and the separation of electron-hole pairs, the a new S-scheme electron transport pathway is formed, which effectively promoted the photogenerated electron transfer as well as the e--h+ separation, which was more favorable for the activation of PMS. The whole reaction pathway and product toxicity were thoroughly evaluated by Fukui function calculations, Liquid Chromatograph Mass Spectrometer (LC-MS), and Toxicity Estimation Software Tool (T.E.S.T.) simulation results, which demonstrated the rationality of the degradation pathway and the greatly reduced product toxicity. Moreover, the composites were effective and versatile for all other antibiotics (chlortetracycline (CTC), ciprofloxacin (CIP) and sulfadiazine (SDZ)). As an advanced oxidation process, the activation of PDIs/Fe2O3@C under visible light shows its potential application in pollutant degradation, which provides new perspectives and ideas for further effective treatment of real wastewater.

2D/2D Bi2MoO6/CoAl LDH S-scheme heterojunction for enhanced removal of tetracycline: Performance, toxicity, and mechanism

In this paper, the two-dimensional (2D) layered CoAl LDH (CoAl) was coupled with Bi2MoO6 (BMO) nanoplate and used for tetracycline (TC) degradation. Based on the results of UV-visible diffuse reflectance spectrum (UV-vis DRS), Motty-Schottky curves, and in situ X-ray photoelectron spectroscopy (XPS), a novel 2D/2D Bi2MoO6/CoAl LDH S-scheme heterojunction photocatalyst was built. The photodegradation rate constant of TC by the optimized sample BMO/CoAl30 was 3.637 × 10-2 min-1, which was 1.26 times and 4.01 times higher than that of Bi2MoO6 and CoAl LDH, respectively. The favorable photocatalytic performance of the heterojunction was attributed to the increased interfacial contact area of the 2D/2D structure. Besides, the transfer of photogenerated electrons from Bi2MoO6 to CoAl LDH under the effect of the built-in electric field (BIEF) reduced the recombination of photogenerated carriers and further improved the photocatalytic performance. The reactive species of h+, ·O2-, and 1O2 exhibited critical roles to degrade TC molecules by reactive radicals capture experiments and electron spin resonance (ESR) tests. The intermediate products of TC degradation and toxicity of intermediates were analyzed by liquid chromatography-mass spectrometer (LC-MS) and Toxicity Estimation Software Tool (T.E.S.T). Additionally, the BMO/CoAl composite photocatalysts showed high stability and environmental tolerance during the testing of cycles and environmental impacts with various water sources, organic contaminants, initial pH, and inorganic ions. This work provides a new protocol for designing and constructing novel 2D/2D S-scheme heterojunction photocatalysts for wastewater treatment.

Factors hindering the degradation of pharmaceuticals from human urine in an iron-activated persulfate system

This study investigated the degradation of clofibric acid (CFA), bezafibrate (BZF), and sulfamethoxazole (SMX) in synthetic human urine using a novel mesoporous iron powder-activated persulfate system (mFe-PS system), and identified the factors limiting their degradation in synthetic human urine. A kinetic model was established to expose the radical production in various reaction conditions, and experiments were conducted to verify the modeling results. In the phosphate-containing mFe-PS system, the 120 min removal efficiency of CFA decreased from 95.1% to 76.6% as the phosphate concentration increased from 0.32 to 6.45 mmol/L, but recovered to 90.5% when phosphate concentration increased to 16.10 mmol/L. Meanwhile, the increased concentration of phosphate from 0.32 to 16.10 mmol/L reduced the BZF degradation efficacy from 91.5% to 79.0%, whereas SMX removal improved from 37.3% to 62.9%. The mFe-PS system containing (bi)carbonate, from 4.20 to 166.70 mmol/L, reduced CFA and BZF removal efficiencies from 100% to 76.8% and 80.4%, respectively, and SMX from 83.5% to 56.7% within a 120-min reaction time. In addition, alkaline conditions (pH ≥ 8.0) inhibited CFA and BZF degradations, while nonacidic pH (pH ≥ 7.0) remarkably inhibited SMX degradation. Results of the kinetic model indicated the formation of phosphate (H2PO4·/HPO4·-) and/or carbonate radicals (CO3·-) could limit pharmaceutical removal. The transformation products (TPs) of the pharmaceuticals revealed more incompletely oxidized TPs occurred in the phosphate- and (bi)carbonate-containing mFe-PS systems, and indicated that H2PO4·/HPO4·- mainly degraded pharmaceuticals via a benzene ring-opening reaction while CO3·- preferentially oxidized pharmaceuticals via a hydroxylation reaction.

Mechanisms of interaction between metal-organic framework-based material and persulfate in degradation of organic contaminants (OCs): Activation, reactive oxygen generation, conversion, and oxidation

Metal-organic frameworks (MOFs)-based materials have been of great public interest in persulfate (PS)-based catalytic oxidation for wastewater purification, because of their excellent performance and selectiveness in organic contaminants (OCs) removal in complex water environments. The formation, fountainhead and reaction mechanism of reactive oxygen species (ROSs) in PS-based catalytic oxidation are crucial for understanding the principles of PS activation and the degradation mechanism of OCs. In the paper, we presented the quantitative structure-activity relationship (QSAR) of MOFs-based materials for PS activation, including the relationship of structure and removal efficiency, active sites and ROSs as well as OCs. In various MOFs-based materials, there are many factors will affect their performances. We discussed how various surface modification projects affected the characteristics of MOFs-based materials used in PS activation. Moreover, we revealed the process of ROSs generation by active sites and the oxidation of OCs by ROSs from the micro level. At the end of this review, we putted forward an outlook on the development trends and faced challenges of MOFs for PS-based catalytic oxidation. Generally, this review aims to clarify the formation mechanisms of ROSs via the active sites on the MOFs and the reaction mechanism between ROSs and OCs, which is helpful for reader to better understand the QSAR in various MOFs/PS systems.

Prussian blue analogues-derived zero valent iron to efficiently activate peroxymonosulfate for phenol degradation triggered via reactive oxygen species and high-valent iron-oxo complexes

It is of great significance to develop the effective technique to treat phenol-containing wastewater. Herein, Fe-based prussian blue analogues-derived zero valent iron (ZVI) was successfully synthesized by one-step calcination method. Owing to high specific surface area and rich active sites, ZVI-2 possessed excellent performance in charge transfer. Notably, in comparison with conventional ZVI and Fe2+, ZVI-2 can effectively activate peroxymonosulfate (PMS) for achieving rapid degradation of phenol, and the highest removal efficiency of phenol reached 94.9% within 24 min. More importantly, developed ZVI-2/PMS oxidation system with good stability displayed strong anti-interference capability. Interestingly, Fe0 loaded on the surface of ZVI-2 can efficiently break the O-O bond of PMS to generate reactive oxygen species (i.e., SO4•-, OH•, O2•- and 1O2). As main adsorption sites of PMS, the existence of oxygen vacancy promote the formation of high-valent transition metal complexes (namely ZVI-2≡Fe4+=O). Under the combined action of reactive oxygen species and ZVI-2≡Fe4+=O, phenol can be eventually degraded into CO2 and H2O. The possible degradation pathways of phenol were also investigated. Furthermore, proposed ZVI-2/PMS oxidation system displayed great potential for application in the field of wastewater treatment. All in all, current work provided a valuable reference for design and application of Fe-based catalysts in PS-AOPs.

Single atom catalyst-mediated generation of reactive species in water treatment

Water is one of the most essential components in the sustainable development goals (SDGs) of the United Nations. With worsening global water scarcity, especially in some developing countries, water reuse is gaining increasing acceptance. A key challenge in water treatment by conventional treatment processes is the difficulty of treating low concentrations of pollutants (micromolar to nanomolar) in the presence of much higher levels of inorganic ions and natural organic matter (NOM) in water (or real water matrices). Advanced oxidation processes (AOPs) have emerged as an attractive treatment technology that generates reactive species with high redox potentials (E0) (e.g., hydroxyl radical (HO˙), singlet oxygen (1O2), sulfate radical (SO4˙-), and high-valent metals like iron(IV) (Fe(IV)), copper(III) (Cu(III)), and cobalt(IV) (Co(IV))). The use of single atom catalysts (SACs) in AOPs and water treatment technologies has appeared only recently. This review introduces the application of SACs in the activation of hydrogen peroxide and persulfate to produce reactive species in treatment processes. A significant part of the review is devoted to the mechanistic aspects of traditional AOPs and their comparison with those triggered by SACs. The radical species, SO4˙- and HO˙, which are produced in both traditional and SACs-activated AOPs, have higher redox potentials than non-radical species, 1O2 and high-valent metal species. However, SO4˙- and HO˙ radicals are non-selective and easily affected by components of water while non-radicals resist the impact of such constituents in water. Significantly, SACs with varying coordination environments and structures can be tuned to exclusively generate non-radical species to treat water with a complex matrix. Almost no influence of chloride, carbonate, phosphate, and NOM was observed on the performance of SACs in treating pollutants in water when nonradical species dominate. Therefore, the appropriately designed SACs represent game-changers in purifying water vs. AOPs with high efficiency and minimal interference from constituents of polluted water to meet the goals of water sustainability.

Co-based MOF heterogeneous catalyst for the efficient degradation of organic dye via peroxymonosulfate activation

In this study, a new cobalt-based metal-organic framework (JLNU-500), [Co2(OH)(PBA)(AIP)]·3DMA·0.75H2O (4-(pyridin-4-yl) benzoic acid (HPBA), 5-aminoisophthalic acid (H2AIP) and N,N-dimethylacetamide (DMA)), was fabricated using a solvothermal method. JLNU-500 has 3D network architecture with 1D nanopore channels. The prepared JLNU-500 can activate peroxymonosulfate (PMS) for Rhodamine B (RhB) dye decolorization. Interestingly, catalyst JLNU-500 exhibited high efficiency for PMS activation, and nearly 100% (above 99.8%) removal of RhB with a high concentration (50.0 mg L-1, 100 mL) was achieved within 6 min. The reaction rate constant of the JLNU-500/PMS system was 1.02 min-1 calculated based on the pseudo-first-order kinetics, which is higher than that of the other reported catalysts. Furthermore, the factors, which could influence PMS activation were also investigated, such as PMS dosage, catalyst dosage, pollutant RhB concentration, reaction temperature and solution pH. More importantly, the radical trapping experiments ferreted out that sulfate (SO4˙-) and hydroxyl (˙OH) radicals were the dominating oxidants in the removal of RhB. Moreover, the possible degradation mechanism was elucidated. This study provides new prospects for fabricating new MOFs that can potentially be employed for high-efficiency catalytic oxidation as heterogeneous catalysts.

Application of Fe-MOFs in Photodegradation and Removal of Air and Water Pollutants: A Review

Photocatalytic technology has received increasing attention in recent years. A pivotal facet of photocatalytic technology lies in the development of photocatalysts. Porous metal-organic framework (MOF) materials, distinguished by their unique properties and structural characteristics, have emerged as a focal point of research in the field, finding widespread application in the photo-treatment and conversion of various substances. Fe-based MOFs have attained particular prominence. This review explores recent advances in the photocatalytic degradation of aqueous and gaseous substances. Furthermore, it delves into the interaction between the active sites of Fe-MOFs and pollutants, offering deeper insights into their mechanism of action. Fe-MOFs, as photocatalysts, predominantly facilitate pollutant removal through redox processes, interaction with acid sites, the formation of complexes with composite metal elements, binding to unsaturated metal ligands (CUSs), and hydrogen bonding to modulate their respiratory behavior. This review also highlights the focal points of future research, elucidating the challenges and opportunities that lie ahead in harnessing the characteristics and advantages of Fe-MOF composite catalysts. In essence, this review provides a comprehensive summary of research progress on Fe-MOF-based catalysts, aiming to serve as a guiding reference for other catalytic processes.

Research progress of MOF-based membrane reactor coupled with AOP technology for organic wastewater treatment

MOF-based catalytic membrane reactor (MCMR), which can simultaneously achieve membrane separation and chemical catalytic degradation in an integrated system, is a cutting-edge technology for effective treatment of organic pollutants in water. The coupling of MCMR and advanced oxidation process (AOP) not only significantly improves the pollutant removal efficiency but also inhibits the membrane pollution through self-cleaning effect, thus improving the stability of MCMR. This paper reviews different MCMR systems combined with photocatalysis, Fenton oxidation, and persulfate activation, elucidates the reaction mechanism, discusses key issues to improve system effectiveness, and suggests future challenges and research directions.

Peroxymonocarbonate activation via Co nanoparticles confined in metal-organic frameworks for efficient antibiotic degradation in different actual water matrices

Traditional advanced oxidation processes suffer from low availability of ultrashort lifetime radicals and declining stability of catalysts. Co nanoparticles in hollow bimetallic metal-organic frameworks (Co@MOFs) were synthesized via a solvothermal method. Nanoconfinement and peroxymonocarbonate (PMC) degradation system endows Co@MOFs with high catalytic activity and stability even in the actual water matrices. The nanocomposites exhibited 100-200 nm polyhedron structure with irregular nanocavity between the 20 nm shell and multicores. Co nanoparticles were completely encapsulated by the FeIII-MOF-5 shell according to the X-ray diffraction and photoelectron spectra. Both 0.8 nm micropores and 3.6 nm mesopores were proven to be present. The yolk-shell Co@MOFs exhibited higher catalytic performance than that of Co nanoparticles, hollow FeIII-MOF-5 and its core-shell counterpart toward PMC activation during sulfamethoxazole degradation. The catalytic activities of Co@MOFs for the activation of unsymmetrical peroxides (PMC and peroxymonosulfate) were much higher than those for the symmetrical peroxides (H2O2 and persulfate) and the heterogeneous catalysis was dominant in the Co@MOFs activated H2O2 and PMC systems. The MOF stability was the highest and metal leakages were the least in the activated PMC system among the four peroxides because of mild reaction conditions and the alkalescent solution (pH = 8.3-8.4). Furthermore, the high removal efficiencies (>94%) and degradation rates could be maintained in the different actual water matrices due to the confinement effects. The contributions of carbonate and hydroxyl radicals were primary for sulfamethoxazole degradation, and superoxide anion and singlet oxygen also played essential roles according to scavenging experiments and time-series spin-trapping electron spin resonance spectra. Six degradation pathways were proposed according to 26 intermediate identification and the pharmacophores of more than 80% intermediates were destroyed, which would benefit subsequent biological treatment. Successful combination of nanoconfinement and PMC might provide a new effective solution for pollution remediation.

Constructing liquid metal/metal-organic framework nanohybrids with strong sonochemical energy storage performance for enhanced pollutants removal

With endogenous redox systems and multiple enzymes, the storage and utilization of external energy is general in living cells, especially through photo/ultrasonic synthesis/catalysis due to in-situ generation of abundant reactive oxygen species (ROS). However, in artificial systems, because of extreme cavitation surroundings, ultrashort lifetime and increased diffusion distance, sonochemical energy is rapidly dissipated via electron-hole pairs recombination and ROS termination. Here, we integrate zeolitic imidazolate framework-90 (ZIF-90) and liquid metal (LM) with opposite charges by convenient sonosynthesis, and the resultant nanohybrid (LMND@ZIF-90) can efficiently capture sonogenerated holes and electrons, and thus suppress electron-hole pairs recombination. Unexpectedly, LMND@ZIF-90 can store the ultrasonic energy for over ten days and exhibit acid-responsive release to trigger persistent generation of various ROS including superoxide (O₂•^-), hydroxyl radicals (•OH), and singlet oxygen (¹O₂), presenting significantly faster dye degradation rate (short to seconds) than previously reported sonocatalysts. Moreover, unique properties of gallium could additionally facilitate heavy metals removal through galvanic replacement and alloying. In summary, the LM/MOF nanohybrid constructed here demonstrates strong capacity for storing sonochemical energy as long-lived ROS, enabling enhanced water decontamination without energy input.

Tuned CuCr layered double hydroxide/carbon-based nanocomposites inducing sonophotocatalytic degradation of dimethyl phthalate

This study is the first to explore the possibility of utilizing CuCr LDH decorated on reduced graphene oxide (rGO) and graphene oxide (GO) as sonophotocatalysts for the degradation of dimethyl phthalate (DMP). CuCr LDH and its nanocomposites were successfully fabricated and characterized. Scanning electron microscopy (SEM) along with high-resolution transmission electron microscope (HRTEM) both evidenced the formation of randomly oriented nanosheet structures of CuCr LDH coupled with thin and folded sheets of GO and rGO. The impact of diverse processes on the degradation efficiency of DMP in the presence of the so-prepared catalysts was compared. Benefiting from the low bandgap and high specific surface area, the as-obtained CuCr LDH/rGO represented outstanding catalytic activity (100 %) toward 15 mg L-1 of DMP within 30 min when subjected to light and ultrasonic irradiations simultaneously. Radical quenching experiments and visual spectrophotometry using an O-phenylenediamine revealed the crucial role of hydroxyl radicals compared to holes and superoxide radicals. Overall, outcomes disclosed that CuCr LDH/rGO is a stable and proper sonophotocatalyst for environmental remediation.

Silver Nanoparticles for Waste Water Management

Rapidly increasing industrialisation has human needs, but the consequences have added to the environmental harm. The pollution caused by several industries, including the dye industries, generates a large volume of wastewater containing dyes and hazardous chemicals that drains industrial effluents. The growing demand for readily available water, as well as the problem of polluted organic waste in reservoirs and streams, is a critical challenge for proper and sustainable development. Remediation has resulted in the need for an appropriate alternative to clear up the implications. Nanotechnology is an efficient and effective path to improve wastewater treatment/remediation. The effective surface properties and chemical activity of nanoparticles give them a better chance to remove or degrade the dye material from wastewater treatment. AgNPs (silver nanoparticles) are an efficient nanoparticle for the treatment of dye effluent that have been explored in many studies. The antimicrobial activity of AgNPs against several pathogens is well-recognised in the health and agriculture sectors. This review article summarises the applications of nanosilver-based particles in the dye removal/degradation process, effective water management strategies, and the field of agriculture.

Constructing functional metal-organic frameworks by ligand design for environmental applications

Metal-organic frameworks (MOFs) with unique physical and chemical properties are composed of metal ions/clusters and organic ligands, including high porosity, large specific surface area, tunable structure and functionality, which have been widely used in chemical sensing, environmental remediation, and other fields. Organic ligands have a significant impact on the performance of MOFs. Selecting appropriate types, quantities and properties of ligands can well improve the overall performance of MOFs, which is one of the critical issues in the synthesis of MOFs. This article provides a comprehensive review of ligand design strategies for functional MOFs from the number of different types of organic ligands. Single-, dual- and multi-ligand design strategies are systematically presented. The latest advances of these functional MOFs in environmental applications, including pollutant sensing, pollutant separation, and pollutant degradation are further expounded. Furthermore, an outlook section of providing some insights on the future research problems and prospects of functional MOFs is highlighted with the purpose of conquering current restrictions by exploring more innovative approaches.

Defect-enriched (H2PO4-, Cr3+)-α-Fe2O3/β-In2S3 composites for visible light degradation of 4-nitrophenol

In this work, the high-activity (H₂PO₄^-, Cr³⁺)-α-Fe₂O₃ (PCF) with abundant oxygen vacancies (OVs) and the high specific area was obtained by co-adding H₂PO₄^- and Cr³⁺. Defect-enriched PCF/β-In₂S₃ composites were prepared by low-temperature hydrothermal processes. The prepared composites exhibited improved photocatalytic degradation of 4-nitrophenol under visible light irradiation.The SO bond between PCF and β-In₂S₃ promoted the formation of tight heterojunction composites and increased the OVs concentration. Under the synergistic effect of photo-Fenton, defects, and heterojunction, the PCF/β-In₂S₃ composites effectively promoted the separation of photogenerated carriers and accelerated the production of active substances (•OH, •O₂^-, ¹O₂, and h⁺), leading to the improvement of photocatalytic-Fenton degradation performance. This work provided a new strategy for the preparation of highly efficient photocatalysts.

Enhanced Photocatalytic Degradation of Emerging Contaminants Using Ti3C2Tx MXene-Supported CdS Quantum Dots

The synthesis of efficient and stable catalysts for photocatalytic reactions is still a challenge. In this study, a new photocatalyst composed of two-dimensional titanium carbide (Ti₃C₂T_x) and CdS quantum dots (QDs) was fabricated, in which CdS QDs were intimately anchored on the Ti₃C₂T_x sheet surface. Due to the specific interface characteristics of CdS QDs/Ti₃C₂T_x, Ti₃C₂T_x can considerably facilitate the generation of photogenerated charge carriers, their separation, and their transfer from CdS. As expected, the obtained CdS QDs/Ti₃C₂T_x exhibit outstanding photocatalytic performance for carbamazepine (CBZ) degradation. Moreover, the quenching experiments demonstrated that superoxide radicals (^•O₂^-), H₂O₂, ¹O₂, and ^•OH are the reactive species involved in CBZ degradation, while ^•O₂^- made a major contribution. In addition, the sunlight-driven CdS QDs/Ti₃C₂T_x photocatalytic system is widely suitable for the elimination of different emerging pollutants in various water matrices, suggesting its potential practical environmental applications.

Visible light enhanced persulfate activation for degradation of tetracycline via boosting adsorption of persulfate by ligand-deficient MIL-101(Fe) icosahedron

In this work, Fe-based metal-organic frameworks (Fe-MOFs) are prepared by a simple solvothermal method, in which acetic acid/N, N-dimethylformamide (HAc/DMF) mixture solvents are employed to regulate the particle morphology, exposed facets and ligand defects. At HAc/DMF = 0/50, 5/45 and 8/42 (volume ratio), the irregular particles (MIL-53(Fe)), elongated icosahedrons (5H-MIL-101(Fe)) and icosahedrons (8H-MIL-101(Fe)) are obtained, respectively. Under visible light irradiation (λ > 420 nm) and the addition of sodium persulfate (PS), 5H-MIL-101(Fe) shows the highest degradation activity for tetracycline (TC). Specifically, 80% of TC has been removed by 5H-MIL-101(Fe) within 25 min, and the degradation kinetics rate is 3.03 times higher than that over MIL-53(Fe). The improvement of catalytic activity is mainly attributed to the active facets exposed and ligand defects of 5H-MIL-101(Fe). Density functional theory (DFT) calculation further confirms that the active facets exposed and ligand defects of 5H-MIL-101(Fe) favor the adsorption and activation of PS, benefiting the generation of •SO₄^-. Besides, a probable degradation pathway of TC is proposed based on trapping experiments and liquid chromatography-mass spectrometry (LC-MS) test. Furthermore, the toxicities of intermediates are predicted by the quantitative structure-activity relationship (QSAR) mathematical model. This work demonstrates that visible light enhanced PS activation (Vis-PSA) can more effectively degrade organic pollutants, and this work also provides a simple strategy to precisely regulate ligand defects and actively exposed facets of Fe-MOFs to enhance the adsorption and activation of PS.

Efficient degradation of sulfamethoxazole in various waters with peroxymonosulfate activated by magnetic-modified sludge biochar: Surface-bound radical mechanism

First time, this study synthesized a magnetic-modified sludge biochar (MSBC) as an activator of peroxymonosulfate (PMS) to eliminate sulfamethoxazole (SMX). The removal efficiency of SMX reached 96.1% at t = 60 min by PMS/MSBC system. The larger surface area and magnetic Fe₃O₄ of MSBC surface enhanced its activation performance for PMS. The PMS decomposition, premixing and reactive oxygen species (ROS) identification experiments combined with Raman spectra analysis demonstrated that the degradation process was dominated by surface-bound radicals. The transformed products (TPs) of SMX and the main degradation pathways were identified and proposed. The ecotoxicity of all TPs was lower than that of SMX. The magnetic performance was beneficial for its reuse and the removal efficiency of SMX was 83.3% even after five reuse cycles. Solution pH, HCO₃^- and CO₃^2- were the critical environmental factors affecting the degradation process. MSBC exhibited environmental safety for its low heavy metal leaching. PMS/MSBC system also performed excellent removal performance for SMX in real waters including drinking water (88.1%), lake water (84.3%), Yangtze River water (83.0%) and sewage effluent (70.2%). This study developed an efficient PMS activator for SMX degradation in various waters and provided a workable way to reuse and recycle municipal sludge.

Adsorptive removal of aromatic diamines from water using metal-organic frameworks functionalized with a nitro group

Adsorptive removal of aromatic diamines such as methylenedianiline (MDA) and p-phenylenediamine (PPD) was firstly investigated with nitro-functionalized metal-organic frameworks (MOFs, MIL-101(Cr)-NO₂). The MIL-101(Cr)-NO₂ showed much better performances in the removal of MDA and PPD, in both adsorption capacity and kinetics, than any other adsorbents. For example, MIL-101(Cr)-NO₂ had a much higher maximum adsorption capacity for MDA (1111 mg·g^-1) than activated carbon (208 mg·g^-1) or a reported adsorbent (391 mg·g^-1). Based on experimental results, hydrogen bonding (especially, via the formation of a 6-membered ring (6-MR) between -NO₂ of the adsorbent and -NH₂ of the adsorbates) could be suggested as the main mechanism to interpret the noticeable adsorption of the diamines. Importantly, this is the first example to confirm that MOFs with nitro group can be a competitive adsorbent to remove organics composed of amino group, especially via making 6-MR through hydrogen bonding. Higher adsorption of MDA than that of PPD over MIL-101(Cr)-NO₂ might be explained with π-π interaction between aromatic rings (π-lean aromatics of MOF and π-rich aromatics of the adsorbates). Moreover, MIL-101(Cr)-NO₂ could be recycled after simple washing, suggesting the potential use of the MOF in adsorptive purification of contaminated water with organics with amino groups.

Degradation of lomefloxacin by MoS2/MIL-53(Fe, Cu) catalyst in heterogeneous electro-Fenton process

A novel heterogeneous catalyst named MoS₂/MIL-53(Fe, Cu) (MMFC) was prepared by hydrothermal method and applied in a heterogeneous electro-Fenton (hetero-EF) system for lomefloxacin (LOM) degradation in this work. Under the optimal conditions of current density 3 mA/cm², catalyst dosage 0.100 g/L, and initial pH 6, 93.5% LOM (2 mg/L) removal efficiency was achieved in the MMFC hetero-EF system within 60 min, indicating an obvious improvement compared with the MIL-53(Fe, Cu) hetero-EF system. The good catalytic activity was attributed to more effective active sites of the catalyst and the conversion of Fe(II)/Fe(III) and Cu(I)/Cu(II) promoted by Mo(IV) in MoS₂, which could be inferred by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) characterizations. The reusability and stability of MMFC were explored based on five cyclic experiments, and the average degradation efficiency reached 73.9%. Furthermore, the hetero-EF system could achieve the total removal of moxifloxacin and tetracycline within 6 min and 40 min, respectively. Quenching experiments revealed that the hydroxyl radicals (·OH) were the main reactive radicals while superoxide radicals (·O₂^-) and singlet oxygen (¹O₂) played a certain part in LOM degradation. Finally, the possible mechanism of the hetero-EF process and LOM degradation pathways were proposed, including substitution, elimination, and cleavage of ring structures. Accounting for good catalytic performance, low preparation cost, and satisfactory versatility, the MMFC exhibited good potential to work as a hetero-EF catalyst for wastewater treatment.

Boost piezocatalytic activity of BaSO4 by coupling it with BaTiO3, Cu:BaTiO3, Fe:BaTiO3, S:BaTiO3 and modify them by sucrose for water purification

The purpose of this study is to improve the efficiency of decontamination using BaSO₄ as a piezocatalyst. Three techniques are employed in this study to enhance the piezocatalytic activity of BaSO₄. The first method involves coupling BaSO₄ with BaTiO₃. The acid red 151 and acid blue 113 decontamination rates improved from 56.7% and 60.9% to 61.3% and 64.4%, respectively, as a result of this strategy. Additionally, the composite of BaSO₄ and BaTiO₃ was doped with copper, iron, sulfur, and nitrogen. By doping BaTiO₃, acid red 151 and acid blue 113 achieved 86.7% and 89.2% efficiency, respectively. Finally, the nanostructures were modified with sucrose. These strategies improved degradation efficiency for acid red 151 and acid blue 113 to 92.9% and 93.3%, respectively. The reusability results showed that the piezo-catalytic activity of the m-S-BaSO₄-BaTiO₃ catalyst did not show a significant loss after five recycles for the degradation of AB113.

ZIF-8 metal organic framework materials as a superb platform for the removal and photocatalytic degradation of organic pollutants: a review

Metal organic frameworks (MOFs) are attracting significant attention for applications including adsorption, chemical sensing, gas separation, photocatalysis, electrocatalysis and catalysis. In particular, zeolitic imidazolate framework 8 (ZIF-8), which is composed of zinc ions and imidazolate ligands, have been applied in different areas of catalysis due to its outstanding structural and textural properties. It possesses a highly porous structure and chemical and thermal stability under varying reaction conditions. When used alone in the reaction medium, the ZIF-8 particles tend to agglomerate, which inhibits their removal efficiency and selectivity. This results in their mediocre reusability and separation from aqueous conditions. Thus, to overcome these drawbacks, several well-designed ZIF-8 structures have emerged by forming composites and heterostructures and doping. This review focuses on the recent advances on the use of ZIF-8 structures (doping, composites, heterostructures, etc.) in the removal and photodegradation of persistent organic pollutants. We focus on the adsorption and photocatalysis of three main organic pollutants (methylene blue, rhodamine B, and malachite green). Finally, the key challenges, prospects and future directions are outlined to give insights into game-changing breakthroughs in this area.

A newly-designed free-standing NiCo2O4 nanosheet array as effective mediator to activate peroxymonosulfate for rapid degradation of emerging organic pollutant with high concentration

Nowadays effective treatment of high concentration organic wastewater is still a formidable task facing human beings. Herein, for the first time, a well-defined ZIF-67-derived NiCo₂O₄ nanosheet array was successfully prepared by a feasible method. In comparison with ordinary NiCo₂O₄ nanosphere, the formation of nanosheet structure could offer more opportunities to exposure internal active sites of NiCo₂O₄, thereby resulting in smaller interface resistance and higher charge transfer efficiency. As expected, ZIF-67-derived NiCo₂O₄ nanosheet array displayed great performance in peroxymonosulfate (PMS) activation. More importantly, recyclable redox couples of Co³⁺/Co²⁺ and Ni³⁺/Ni²⁺ endowed the stable catalytic activity of NiCo₂O₄ nanosheet. Interestingly, developed NiCo₂O₄-1/PMS oxidation system could achieve the effective degradation of antibiotics with high concentration in a short time. Both radical and nonradical pathways were involved into PMS activation, wherein SO₄^-, OH, O₂^- and ¹O₂ were major reactive oxygen species. The formation paths of reactive oxygen species and effects of inorganic anions were also investigated. Electrochemical analyses revealed that NiCo₂O₄-1 with nanosheet structure mediated the electron transfer between PMS and tetracycline (TC), which played a vital role in TC degradation. Furthermore, developed NiCo₂O₄-1/PMS oxidation system displayed great removal ability towards TC in actual water samples, and degradation products were low toxicity or no toxicity. In short, current work not only developed an effective oxidation system for completing the rapid degradation of antibiotic with high concentration, but also shared some novel insights into the activation mechanism of SR-AOPs.

Er3+/Sm3+ co-doped Bi2O2CO3 in photocatalytic water treatment: Immobilization, acute toxicity, sterilization, and catalytic oxidation activity

Defect construction and rare earth doping are the linchpins to completing the target of partial electronic regulation. In Er³⁺/Sm³⁺ co-doping Bi₂O₂CO₃, rare earth doping resulted in the exposure of {001} crystal plane in Bi₂O₂CO₃ and cause surface defects and electron traps, achieving wide light response capability and fast carrier separation. Furthermore, a potential TC degradation route was acknowledged derived from LC-MS. Then, the median lethal concentration LC50 (96 h) is 80 ppm, probing the 2E2SBOC photocatalyst has low toxicity in actual wastewater. Combining with immobilization technology, not only does it have little impact on the organisms in the wastewater, but it is easy to recycle after degradation. In terms of new water disinfection technology, bacterial experiments in natural waters proved that 2E2SBOC has a potential disinfection system, which promotes the exposure of more active sites during degradation. This effective project offers a novel perspective for the development and application of rare-earth-doped photocatalysts.

Pore creation nanoarchitectonics from non-porous metal-organic framework to porous carbon for adsorptive elimination of sulfanilamide and chloroxylenol from aqueous solution

Three isomeric metal-organic frameworks (MOFs) such as MAF-5, - 6, and - 32 (with the same composition of [Zn(2-ethylimidazole)₂]) were carbonized and, for the first time, activated further with KOH to prepare highly porous MOF-derived carbons (MDCs). Importantly, MDC-32 derived from non-porous MAF-32 had the highest porosity among the three MDCs although it has the lowest porosity when no KOH activation was done. Adsorption of sulfanilamide and chloroxylenol from water was investigated with the MDCs. Among the MDCs, MDC-32 showed the best adsorptive performance for sulfanilamide and chloroxylenol. Moreover, MDC-32, had the highest adsorption capacity (256 mg/g) for removing sulfanilamide from water, compared with any adsorbent reported so far. Based on the observed adsorption and properties of the adsorbate and adsorbent, π-π and hydrogen bonding interactions, with a slight contribution of repulsive electrostatic interaction, could be suggested as the mechanism for the sulfanilamide adsorption over the MDC-32. Moreover, the MDC-32 could be recycled easily for up to four cycles. It could be suggested that non-porous MOFs can be a good precursor for highly porous MDCs, if activated well using KOH, for example. Finally, MAF-32-derived carbon, MDC-32, might be suggested as a plausible adsorbent to eliminate organics such as sulfanilamide from water.

High-activity and excellent-reusability γ-Fe2O3/SiO2 coating on TC4 titanium alloy by plasma electrolytic oxidation for enhanced photo-Fenton degradation

The immobilized coatings as a kind of promising Fenton-like catalysts with excellent performance and reusability for the efficient degradation of antibiotics and phenol under solar light irradiation is investigated. Herein, the porous γ-Fe₂O₃/SiO₂ immobilized ceramic coating on TC4 titanium alloy as photo-Fenton catalyst was prepared via plasma electrolytic oxidation technology. The as-obtained immobilized coating manifested a remarkable catalytic activity that the removal efficiencies of phenol and various antibiotics could reach more than 92% within 90 min, and presented excellent reusability after six runs in phenol removal. The high activity and excellent reusability of γ-Fe₂O₃ were attributed to the synergistic effect of multiple pathways to jointly produce abundant •OH, and the combination of γ-Fe₂O₃ and SiO₂ in the coating could effectively reduce iron leaching during the heterogeneous photo-Fenton process, respectively. This work provides a novel strategy for the synthesis of high-performance photo-Fenton catalysts to dispose of wastewater in the future.

A new two-dimensional cadmium(II) coordination polymer based on the asymmetric dicarboxylic acid homophthalic acid: synthesis, structure and properties

A new coordination polymer poly[[μ2-4,4′-bis(2-methylimidazol-1-yl)biphenyl-κ2 N 3:N 3′]bis[μ3-2-(2-carboxylatophenyl)acetato-κ5 O,O′:O′,O′′:O′′]dicadmium(II)], [Cd(C9H6O4)(C20H18N4)0.5] n or [Cd(HMPH)(4,4′-BMIBP)0.5] n [H2HMPH is homophthalic acid and 4,4′-BMIBP is 4,4′-bis(2-methylimidazol-1-yl)biphenyl], (I), was synthesized by the solvothermal method and was structurally characterized by means of single-crystal X-ray diffraction, IR spectroscopy and elemental analysis. Coordination polymer (I) exhibits a two-dimensional layer based on one-dimensional [Cd(HMPH)] n chains. Remarkably, photocatalytic degradation experiments on methylene blue (MB) indicated that (I) exhibits an obvious degradation effect. Moreover, an investigation of the luminescence properties of (I) revealed that it could be considered as a potential highly selective luminescence sensor for nitrofurantoin (NFT).

Ti-based robust MOFs in the combined photocatalytic degradation of emerging organic contaminants

Photocatalysis process is a promising technology for environmental remediation. In the continuous search of new heterogeneous photocatalysts, metal–organic frameworks (MOFs) have recently emerged as a new type of photoactive materials for water remediation. Particularly, titanium-based MOFs (Ti-MOFs) are considered one of the most appealing subclass of MOFs due to their promising optoelectronic and photocatalytic properties, high chemical stability, and unique structural features. However, considering the limited information of the reported studies, it is a hard task to determine if real-world water treatment is attainable using Ti-MOF photocatalysts. In this paper, via a screening with several Ti-MOFs, we originally selected and described the potential of a Ti-MOF in the photodegradation of a mixture of relevant Emerging Organic Contaminants (EOCs) in real water. Initially, two challenging drugs (i.e., the β-blocker atenolol (At) and the veterinary antibiotic sulfamethazine (SMT)) and four water stable and photoactive Ti-MOF structures have been rationally selected. From this initial screening, the mesoporous Ti-trimesate MIL-100(Ti) was chosen as the most promising photocatalyst, with higher At or SMT individual photodegradation (100% of At and SMT photodegradation in 2 and 4 h, respectively). Importantly, the safety of the formed by-products from the At and SMT photodegradation was confirmed. Finally, the At and SMT photodegradation capacity of MIL-100(Ti) was confirmed under realistic conditions, by using a mixture of contaminants in tap drinking water (100% of At and SMT photodegradation in 4 h), proven in addition its potential recyclability, which reinforces the potential of MIL-100(Ti) in water remediation.

Construction of Cu(I)-Organic Frameworks with Effective Sorption Behavior for Iodine and Congo Red

The assembly of a tetradentate pyridine-derived ligand with CuX has afforded two isostructural Cu(I)-organic frameworks [Cu₂X₂(TBD)·DMF]_n (X = Cl for 1 and Br for 2) in this work. Structural analysis indicates that the compounds feature hybrid layered architectures, and the three-dimensional supramolecular frameworks are finally fabricated through the alternative stacking of adjacent layers wherein large open channels are simultaneously constructed. The chemical stability has been studied showing the excellent skeleton maintenance of the prepared solids in various solvents and even in water. Moreover, the iodine and dye sorption performance for compound 1 has been further tested. The Cu(I)-based metal-organic framework exhibits outstanding sorption and separation abilities on the targeted species, which could be considered as a promising adsorbent with high efficiency and selectivity.

A four-fold three-dimensional zinc(II) coordination polymer based on 4,4′-bis(2-methyl-imidazolyl)biphenyl and 5-sulfoisophthalate ligands: synthesis, structure and properties

A Zn(II) coordination polymer, [Zn3(4,4′-BMIBP)3(SIP)2] n (1) (4,4′-BMIBP = 4,4′-bis(2-methyl-imidazolyl)biphenyl, H3SIP = 5-sulfoisophthalic acid) was hydrothermally synthesized and structurally characterized. Complex 1 has a (3,4)-connected binodal four-fold three-dimensional topology with a point symbol of {4·62·82·10}2{4·62}2{64·102}. It shows strong fluorescence emission in the solid state and efficient photocatalytic performances to degrade methylene blue (MB) under UV irradiation, the degradation of MB reaching 88% after 50 min.

A critical review on diverse technologies for advanced wastewater treatment during SARS-CoV-2 pandemic: What do we know?

Advanced wastewater treatment technologies are effective methods and currently attract growing attention, especially in arid and semi-arid areas, for reusing water, reducing water pollution, and explicitly declining, inactivating, or removing SARS-CoV-2. Overall, removing organic matter and micropollutants prior to wastewater reuse is critical, considering that water reclamation can help provide a crop irrigation system and domestic purified water. Advanced wastewater treatment processes are highly recommended for contaminants such as monovalent ions from an abiotic source and SARS-CoV-2 from an abiotic source. This work introduces the fundamental knowledge of various methods in advanced water treatment, including membranes, filtration, Ultraviolet (UV) irradiation, ozonation, chlorination, advanced oxidation processes, activated carbon (AC), and algae. Following that, an analysis of each process for organic matter removal and mitigation or prevention of SARS-CoV-2 contamination is discussed. Next, a comprehensive overview of recent advances and breakthroughs is provided for each technology. Finally, the advantages and disadvantages of each method are discussed.

Application of Nanocatalysts in Advanced Oxidation Processes for Wastewater Purification: Challenges and Future Prospects

The increase in population demands for industrialization and urbanization which led to the introduction of novel hazardous chemicals in our environment. The most significant parts of these harmful substances found in water bodies remain in the background, causing a health risk to humans and animals. It is critical to remove these toxic chemicals from the wastewater to keep a cleaner and greener environment. Hence, wastewater treatment is a challenging area these days to manage liquid wastes effectively. Therefore, scientists are in search of novel technologies to treat and recycle wastewater, and nanotechnology is one of them, thanks to the potential of nanoparticles to effectively clean wastewater while also being ecologically benign. However, there is relatively little information about nanocatalysts’ applicability, efficacy, and challenges for future applications in wastewater purification. This review paper is designed to summarize the recent studies on applying various types of nanocatalysts for wastewater purification. This review paper highlights innovative work utilizing nanocatalysts for wastewater applications and identifies issues and challenges to overcome for the practical implementation of nanocatalysts for wastewater treatment.