Recent advances in Cu-Fenton systems for the treatment of industrial wastewaters: Role of Cu complexes and Cu composites

Cu2(OH)3NO3/γ-Al2O3 catalyzes Fenton-like oxidation for the advanced treatment of effluent organic matter (EfOM) in fermentation pharmaceutical wastewater: The synergy of Cu2(OH)3NO3 and γ-Al2O3

The secondary effluent of fermentation pharmaceutical wastewater exhibits high chromaticity, elevated salinity, and abundant refractory effluent organic matter (EfOM), presenting significant treatment challenges and environmental threats. Herein, Cu2(OH)3NO3/γ-Al2O3 was fabricated through ultrasound-assisted impregnation and calcination to catalyze the Fenton-like oxidation for degrading organic pollutants in this secondary effluent. Under neutral conditions, with 400.00 mg/L H2O2, 8 g/L catalyst, and at 30 ℃, the EfOM and CODCr removal efficiencies can reach 96.90 % and 51.56 %, respectively. The Cu2(OH)3NO3/γ-Al2O3 catalyst possesses ideal reusability, maintaining CODCr, chromaticity, and EfOM removal efficiencies at 44.44 %-64.59 %, 85.45 %-93.45 %, and 61.00 %-95.00 % over 220 h in a continuous-flow catalytic oxidation system operated at room temperatures (15-25 ℃). Electron paramagnetic resonance results and density functional theory calculations indicate that •OOH may be the predominant reactive oxygen species, facilitated by the easier elongation of the OH bond in H2O2 compared to the OO bond. The adjusted electronic structure endows Cu2(OH)3NO3/γ-Al2O3 composite sites with superior catalytic selectivity for H2O2 activation compared to Cu2(OH)3NO3 single crystal sites, with γ-Al2O3 additionally facilitating H2O2 activation through electron donation. This research highlights the efficacy of Cu2(OH)3NO3/γ-Al2O3 in the advanced treatment of complex industrial wastewater, elucidating its catalytic mechanisms and potential applications.

Copper single-atom catalysts for broad-spectrum antibiotic-resistant bacteria (ARBs) antimicrobial: Activation of peroxides and mechanism of ARBs inactivation

Antibiotic-resistant bacteria (ARBs) have been widely detected in wastewater and become a potential threat to human health. This work found that low-load single-atom copper (0.1 wt%) anchored on g-C3N4 (SA-Cu/g-C3N4) exhibited excellent ability to activate H2O2 and inactivate ARBs during the photo-Fenton process. The presence of SA-Cu/g-C3N4 (0.4 mg/mL) and H2O2 (0.1 mM) effectively inactivated ARBs. More than 99.9999 % (6-log) of methicillin-resistant Staphylococcus aureus (MRSA), and carbapenem-resistant Acinetobacter baumannii (CRAB) could be inactivated within 5 min. Extended-spectrum β-lactamase-producing pathogenic Escherichia coli (ESBL-E) and vancomycin-resistant Enterococcus faecium (VRE) were killed within 10 and 30 min, respectively. In addition, more than 5-log of these ARBs were killed within 60 min in real wastewater. Furthermore, D2O-labeling with Raman spectroscopy revealed that SA-Cu/g-C3N4 completely suppressed the viable but nonculturable (VBNC) state and reactivation of bacteria. Electron paramagnetic resonance spectroscopy results demonstrated that g-C3N4 mainly produced 1O2, while SA-Cu/g-C3N4 simultaneously produced both 1O2 and •OH. The •OH and 1O2 cause lipid peroxidation damage to the cell membrane, resulting in the death of the bacteria. These findings highlight that the SA-Cu/g-C3N4 catalyst is a promising photo-Fenton catalyst for the inactivation of ARBs in wastewater.

Synthesis, structural characterization, DFT and molecular dynamics simulations of dinuclear (μ-hydroxo)-bridged triethanolamine copper(II) complexes: efficient candidates towards visible light-mediated photo-Fenton degradation of organic dyes

Multinuclear (di/tri) copper(II) complexes bridged through hydroxyl groups are very interesting coordination complexes owing to their potential applications in various fields. In this work, three novel dinuclear (μ-hydroxo)-bridged copper(II) complexes in the crystal form, namely, [Cu2(3,5-DIFLB)2(H2tea)2](H2O) (1), [Cu2(4-ClB)2(H2tea)2](H2O) (2), and [Cu2(4-ETHB)2(H2tea)2](H2O)2 (3) (where DIFLB = difluorobenzoate, CLB = chlorobenzoate, ETHB = ethoxybenzoate, and H3tea = triethanolamine), were isolated at room temperature using methanol and water in a 4 : 1 v/v ratio as a solvent. Furthermore, all three complexes (1-3) were characterised using spectroscopic (UV-vis, DRS, and FT-IR), electrochemical (CV) and single-crystal X-ray diffraction techniques. Structural insights gained by packing analysis revealed the role of steric constraints of substituents and various non-covalent interactions in lattice stabilization, which were indeed supported by theoretical and molecular electrostatic potential illustrations. Hirshfeld surface analysis provided quantitative verification about various non-covalent interactions (interatomic contacts) involved in the packing of molecules. Interestingly, as a potential application, complexes 1-3 all exhibited remarkable visible light-mediated photo-Fenton degradation of approximately 98% for 50 ppm concentration of organic dyes (fuchsin basic (FB) and methyl orange (MO)) in 90 minutes with the optimized conditions of 1 mg mL-1 of dye solution. In all the cases, dye degradation by these materials was ascribed to the symbiotic relations among the molecular structures of complexes 1-3, which were endowed with various electron-withdrawing and electron-releasing substituents and ionic strength, with respect to the structure, shape and interacting patterns of dye molecules. The adsorption mechanism indicates that various weak interactions between the donor and acceptor groups of complexes and dyes, such as electrostatic, hydrogen bonding, and direct coordination to metal sites, play a crucial role, which is confirmed by molecular dynamics (MD) simulations. Theoretical studies by DFT-based descriptors, molecular electrostatic potentials, and band gaps provided deep insights into various electronic and reactivity parameters. For subsequent processes of dye degradation, complexes 1-3 were stable and recoverable. The successful integration of experimental and theoretical approaches sheds light on copper-based dinuclear stable coordination complexes, showcasing a significant step towards the development of novel heterogeneous photo-Fenton catalysts.

Effects of copper on chemical kinetics and brown carbon formation in the aqueous ˙OH oxidation of phenolic compounds

Many phenolic compounds (PhCs) in biomass burning and fossil fuel combustion emissions can partition into atmospheric aqueous phases (e.g., cloud/fog water and aqueous aerosols) and undergo reactions to form secondary organic aerosols (SOAs) and brown carbon (BrC). Redox-active transition metals, particularly Fe and Cu, are ubiquitous species in atmospheric aqueous phases known to participate in Fenton/Fenton-like chemistry as a source of aqueous ˙OH. However, even though the concentrations of water-soluble Cu are close to those of water-soluble Fe in atmospheric aqueous phases in some areas, unlike Fe, the effects that Cu have on SOA and BrC formation in atmospheric aqueous phases have scarcely been studied and remain poorly understood. We investigated the effects of Cu(II) on PhC reaction rates and BrC formation during the aqueous oxidation of four PhCs (guaiacol, catechol, syringol, and vanillin) by ˙OH generated from Fenton-like chemistry under different pH conditions. While the PhCs reacted when both H2O2 and Cu(II) were present in the absence (i.e., dark oxidation) and presence (i.e., photooxidation) of light, the reaction rates were at least one order of magnitude higher during photooxidation. Higher PhC reaction rates were measured at higher pH during both dark oxidation and photooxidation as a result of higher ˙OH concentrations produced by Fenton-like chemistry. Only water-soluble BrC was formed during dark oxidation and photooxidation when Cu(II) was present. Mass absorption coefficients (103 to 104 cm2 g-1) comparable to those of biomass burning BrC were measured during dark oxidation and photooxidation when Cu(II) was present. Light absorption was enhanced at higher pH during dark oxidation and photooxidation, which indicated that higher quantities and/or more absorbing BrC chromophores were formed at higher pH. The effects that Cu(II) had on the PhC reaction rates and the composition of SOAs and BrC formed depended on the PhC base structure (i.e., benzenediol vs. methoxyphenol). Overall, these results show how aqueous reactions involving Cu(II), H2O2, and PhCs can be an efficient source of daytime and nighttime water-soluble BrC and SOAs, which can have significant implications for how the atmospheric fates of PhCs are modeled for areas with substantial concentrations of water-soluble Cu in highly to moderately acidic cloud/fog water and aqueous aerosols.

Chloride-Mediated Enhancement in Cu(II)-catalyzed Fenton-like Reaction: The Overlooked Reactive Chlorine Species

The practical application of Cu(II)-catalyzed Fenton-like reaction (Cu(II)/H2O2) exhibits a low efficiency in the degradation of refractory compounds of wastewater. The impact of chloride ions (Cl-) on Fenton-like reactions have been investigated, but the influence mechanism is still unclear. Herein, the presence of Cl- (5 mM) significantly accelerated the degradation of benzoic acid (BA) under neutral conditions. The degradation of BA follows pseudo-first-order kinetics, with a degradation rate 7.3 times higher than the Cu(II)/H2O2 system. Multiple evidences strongly demonstrated that this reaction enables the production of reactive chlorine species (RCS) rather than HO• and high-valent copper (Cu(III)). The kinetic model revealed that Cl- could shift reactive species from the key intermediate (Cu(III)-chloro complexes) to RCS. Dichlorine radicals (Cl2•-) was discovered to play a crucial role in BA degradation, which was largely overlooked in previous reports. Although the reaction rate of Cl2•- with BA (k = 2.0 × 106 M-1 s-1) is lower than that of other species, its concentration is 10 orders of magnitude higher than that of Cu(III) and HO•. Furthermore, the exceptional efficacy of the Cu(II)/H2O2 system in BA degradation was observed in saline aquatic environments. This work sheds light on the previously unrecognized role of the metal-chloro complexes in production the RCS and water purification.

Nitrogen-doped carbon-coated Cu0 activates molecular oxygen for norfloxacin degradation over a wide pH range

The Fenton-like activated molecular oxygen technology demonstrates significant potential in the treatment of refractory organic pollutants in wastewater, offering promising development prospects. We prepared a N-doped C-coated copper-based catalyst Cu0/NC3-600 through the pyrolysis of Mel-modified Cu-based metal-organic framework (MOF). The results indicate that the degradation of 20 mg/L norfloxacin (NOR) was achieved using 1.0 g/L Cu0/NC3-600 across a wide pH range, with a removal rate exceeding 95 % and total organic carbon (TOC) removals approaching 70 % after 60 min at pH 5-11. The nitrogen doping enhances the electronic structure of the carbon material, facilitating the adsorption of molecular oxygen. Additionally, the formed carbon layer effectively prevent copper leaching,contributing to increased stability to a certain extent. Subsequently, we propose the catalytic reaction mechanism for the Cu0/NC/air system. Under acidic conditions, Cu0/NC3-600 activates molecular oxygen to produce the •O2-, which serves as the primary active species for NOR degradation. While in alkaline conditions, the high-valent copper species Cu3+ is generated in conjunction with •O2-, both working simultaneously for NOR degradation. Furthermore, based on the LC-MS results, we deduced four possible degradation pathways. This work offers a novel perspective on expanding the pH range of copper-based catalysts with excellent ability to activate molecular oxygen for environmental water treatment.

Organic cocatalysts improved Fenton and Fenton-like processes for water pollution control: A review

In recent times, organic compounds have been extensively utilized to mitigate the limitations associated with Fe(Ⅲ) reduction and the narrow pH range in Fenton and Fenton-like processes, which have garnered considerable attention in relevant studies. This review presents the latest advancements in the comprehensive analysis and applications of organic agents as assistant/cocatalysts during Fenton/Fenton-like reactions for water pollution control. The primary focus includes the following: Firstly, the mechanism of organic co-catalytic reactions is introduced, encompassing both complexation and reduction aspects. Secondly, these organic compounds are classified into distinct categories based on their functional group structures and applications, namely polycarboxylates, aminopolycarboxylic acids, quinones, phenolic acids, humic substances, and sulfhydryl compounds, and their co-catalytic functions and mechanisms of each category are discussed in meticulous detail. Thirdly, a comprehensive comparison is conducted among various types of organic cocatalysts, considering their relative merits, cost implications, toxicity, and other pertinent factors. Finally, the review concludes by addressing the universal challenges and development prospects associated with organic co-catalytic systems. The overarching objective of this review is to provide insights into potential avenues for the future advancement of organic co-catalytic Fenton/Fenton-like reactions in the context of water purification.

Wet peroxide oxidation process catalyzed by Cu/Al2O3: phenol degradation and Cu2+ dissolution behavior

Catalytic wet peroxide oxidation (CWPO) has become an important deep oxidation technology for organics removal in wastewater treatments. Supported Cu-based catalysts belong to an important type of CWPO catalyst. In this paper, two Cu catalysts, namely, Cu/Al2O3-air and Cu/Al2O3-H2 were prepared and evaluated through catalytic degradation of phenol. It was found that Cu/Al2O3-H2 had an excellent catalytic performance (TOC removal rate reaching 96%) and less metal dissolution than the Cu/Al2O3-air case. Moreover, when the organic removal rate was promoted at a higher temperature, the metal dissolution amounts was decreased. Combined with hydroxyl radical quenching experiments, a catalytic oxidation mechanism was proposed to explain the above-mentioned interesting behaviors of the Cu/Al2O3-H2 catalyst for CWPO. The catalytic test results as well as the proposed mechanism can provide better guide for design and synthesis of good CWPO catalysts.

Intramolecular generation of endogenous Cu(III) for selectively self-catalytic degradation of Cu(II)-EDTA from wastewater by UV/peroxymonosulfate

HO•/SO4•--based advanced oxidation processes for the decomplexation of heavy metal-organic complexes usually encounter poor efficiency in real scenarios. Herein, we reported an interesting self-catalyzed degradation of Cu(II)-EDTA with high selectivity in UV/peroxymonosulfate (PMS). Chemical probing experiments and competitive kinetic analysis quantitatively revealed the crucial role of in situ formed Cu(III). The Cu(III) species not only oxidized Cu(II)-EDTA rapidly at ∼3 × 107 M-1 s-1, but also exhibited 2-3 orders of magnitude higher steady-state concentration than HO•/SO4•-, leading to highly efficient and selective degradation of Cu(II)-EDTA even in complex matrices. The ternary Cu(II)-OOSO3- complexes derived from Cu(II)-EDTA decomposition could generate Cu(III) in situ via the Cu(II)-Cu(I)-Cu(III)-Cu(II) cycle involving intramolecular electron transfer. This method was also applicable to various Cu(II) complexes in real electroplating wastewater, demonstrating higher energy efficiency than commonly studied UV-based AOPs. This study provids a proof of concept for efficient decomplexation through activating complexed heavy metals into endogenous reactive species.

Graphite/carbon-doped TiO2 nanocomposite synthesized by ultrasound for the degradation of diclofenac

Graphite/C-doped TiO2 nanocomposite was synthesized at room temperature using a simple, impressive, and indirect sonication (20 kHz) by the cup horn system. Tetrabutyltitanate as the precursor of titanium and graphite (G) as the carbon source was used in the preparation of nanocomposite as a photocatalyst. The molar ratio of G/TiO2 as a key parameter was investigated in the synthesis of G/C-doped TiO2. The obtained materials were widely characterized using XRD, SEM, TEM, FTIR, XPS, and UV-Vis diffuse reflectance techniques. The UV-Vis diffuse reflectance spectroscopy results showed that the edge of light absorption of nanocomposite was distinctly red-shifted to the visible area via carbon doping. The XPS outcomes acknowledged the existence of the C, Ti, and O in the photocatalyst. The composite showed an enhancement in the dissociation efficiency of photoinduced charge carriers through the doping process. The photocatalytic activity of the synthesized nanocomposite was checked with diclofenac (DCF) as a pharmaceutical contaminant. The results displayed that G/C-doped TiO2 represented better photocatalytic performance for DCF than TiO2. This was due to the excellent crystallization, intense absorption of visible light, and the impressive separation of photoinduced charge carriers. Various active species such as •OH, •O2¯, h+, and H2O2 play a role in the degradation of DFC. Therefore, different scavengers were used and the role of each one in degradation was investigated. According to the obtained results, •O2¯ radical showed a major role in the photocatalytic process. This work not only proposes a deep insight into the photosensitization-like mechanism by using G-based materials but also develops new photocatalysts for the removal of emerging organic pollutants from waters using sunlight as available cheap energy.

Coordination-Polymer-Derived Cu-CoO/C Nanocomposite Used in Fenton-like Reaction to Achieve Efficient Degradation of Organic Compounds

In this paper, carbon-matrix-supported copper (Cu) and cobaltous oxide (CoO) nanoparticles were obtained by using coordination polymers (CPs) as a precursor. The aqueous solutions of copper methacrylate (CuMA) and cobalt methacrylate (CoMA) were preferentially prepared, which were then mixed with anhydrous ethanol to fabricate dual metal ion coordination polymers (CuMA/CoMA). After calcination under an argon atmosphere, the Cu-CoO/C nanocomposite was obtained. Scanning electron microscope (SEM) and transmission electron microscope (TEM) showed that the material has banded morphology, and the dual functional nanoparticles were highly dispersed in the carbon matrix. The prepared material was used in a heterogeneous Fenton-like reaction, with the aim of replacing traditional ferric catalysts to solve pH constraints and the mass production of ferric slime. The obtained nanocomposite showed excellent catalytic performance on the degradation of methylene blue (MB) at near-neutral conditions; the discoloration efficiency is about 98.5% within 50 min in the presence of 0.15 mmol/mL H2O2 and 0.5 mg/mL catalyst. And good reusability was verified via eight cycles. The plausible pathway for MB discoloration and the possible catalytic mechanism was also proposed.

Kinetic Modeling Assisted Analysis of Vitamin C-Mediated Copper Redox Transformations in Aqueous Solutions

The kinetics of oxidation of micromolar concentrations of ascorbic acid (AA) catalyzed by Cu(II) in solutions representative of biological and environmental aqueous systems has been investigated in both the presence and absence of oxygen. The results reveal that the reaction between AA and Cu(II) is a relatively complex set of redox processes whereby Cu(II) initially oxidizes AA yielding the intermediate ascorbate radical (A•-) and Cu(I). The rate constant for this reaction was determined to have a lower limit of 2.2 × 104 M-1 s-1. Oxygen was found to play a critical role in mediating the Cu(II)/Cu(I) redox cycle and the oxidation reactions of AA and its oxidized forms. Among these processes, the oxidation of the ascorbate radical by molecular oxygen was identified to play a key role in the consumption of ascorbic acid, despite being a slow reaction. The rate constant for this reaction (A • - + O 2 → DHA + O 2 • - ) was determined for the first time with a calculated value of 54 ± 8 M-1 s-1. The kinetic model developed satisfactorily describes the Cu/AA/O2 system over a range of conditions including different concentrations of NaCl (0.2 and 0.7 M) and pH (7.4 and 8.1). Appropriate adjustments to the rate constant for the reaction between Cu(I) and O2 were found to account for the influence of the chloride ions and pH on the kinetics of the process. Additionally, the presence of Cu(III) as the primary oxidant resulting from the interaction between Cu(I) and H2O2 in the Cu(II)/AA system was confirmed, along with the coexistence of HO•, possibly due to an equilibrium established between Cu(III) and HO•.

Controllable synthesis of copper-organic frameworks via ligand adjustment for enhanced photo-Fenton-like catalysis

The efficient heterogeneous photo-Fenton-like catalysts based on two secondary ligand-induced Cu(II) metal-organic frameworks (Cu-MOF-1 and Cu-MOF-2) were constructed for the first time and investigated for the degradation of multiple antibiotics. Herein, two novel Cu-MOFs were prepared using mixed ligands by a facile hydrothermal method. The one-dimensional (1D) nanotube-like structure could be obtained by using V-shaped, long and rigid 4,4'-bis(3-pyridylformamide)diphenylether (3-padpe) ligand in Cu-MOF-1, while polynuclear Cu cluster could be prepared more easily by using short and small isonicotinic acid (HIA) ligand in Cu-MOF-2. Their photocatalytic performances were measured by degradation of multiple antibiotics in Fenton-like system. Comparatively, Cu-MOF-2 exhibited superior photo-Fenton-like performance under visible light irradiation. The outstanding catalytic performance of Cu-MOF-2 was ascribed to the tetranuclear Cu cluster configuration and excellent ability of photoinduced charge transfer and hole separation thus improved the photo-Fenton activity. In addition, Cu-MOF-2 showed high photo-Fenton activity in wide pH working range 3-10 and maintained wonderful stability after five cyclic experiments. The degradation intermediates and pathways were deeply studied. The main active species h⁺, O₂^- and OH worked together in photo-Fenton-like system and possible degradation mechanism was proposed. This study provided a new approach to design the Cu-based MOFs Fenton-like catalysts.

Performance and mechanisms of iron/copper-doped zirconium-based catalyst containing hydroxyl radicals for enhanced removal of gaseous benzene

In the present study, novel copper-doped zirconium-based MOF (UIO-66) and copper-doped iron-based UIO-66 catalysts were prepared by hydrothermal synthesis method to improve the removal performance of gaseous benzene. The characteristics of the catalysts were analyzed by means of XRD, SEM, XPS, BET, and EPR. The copper loading catalyst had high crystallinity and irregular globular. The three kinds of catalysts with different Cu/Fe ratios had regular cubic shape. Compared with the catalyst supported with single copper, the bimetal Cu/Fe modification had a certain adjustment effect on the morphology, which specifically reflected in the uniform size and shape of catalyst particles with better dispersibility. The factors of different metal loading, dose of H₂O₂, and reaction temperature on benzene removal have been studied. It has been observed that in heterogeneous advanced oxidation removal of benzene, 3-Cu@UIO-66 and Cu_1.5/Fe_1.5@UIO-66 achieved the highest benzene removal efficiency of 81.2% and 94.6%, respectively. EPR results showed that the increase of Cu loading and different Cu/Fe ratios promoted the yield of hydroxyl radicals, thus promoted the benzene removal efficiency. The efficiency of heterogeneous oxidation removal of benzene first increased and then decreased with the increase of temperature due to H₂O₂ instability. DFT calculations exhibited that the Fe_oct-Cu-O site was a more effective activation site than the single Fe_oct-O site. Dissociative adsorption occurred with the O-O bond of H₂O₂ cracked, and the formed hydroxyls parallel adsorbed on the benzene surface. The combination of benzene and hydroxyls was strong chemisorption with the torsion angle of benzene ring obviously turned. The work was of great importance for identifying the roles of the novel catalyst for the removal of benzene pollutant from waste gases.

0D carbon dots intercalated Z-scheme CuO/g-C3N4 heterojunction with dual charge transfer pathways for synergetic visible-light-driven photo-Fenton-like catalysis

Photo-Fenton-like catalysis allows development of novel advanced oxidation technology with promising application in wastewater treatment. In this work, carbon dots (CDs) were intercalated between CuO nanoparticles and coralloid flower-like graphitic carbon nitride (g-C₃N₄) to fabricate a ternary CuO/CDs/g-C₃N₄ hybrid for synergetic visible-light-driven photo-Fenton-like oxidation. The CuO/CDs/g-C₃N₄ hybrid showed remarkable degradation efficiency towards recalcitrant organic contamination, excellent tolerance to realistic environmental conditions, exceptional stability and wide universality, declaring great potential for practical applications. •OH and •O₂^- radicals were demonstrated to be the primary contributors in the photo-Fenton-like system. Mechanism studies reveal dual charge transfer pathways in the Z-scheme CuO/g-C₃N₄ heterojunction assisted by interfacial electron transmission bridges of CDs, which can simultaneously boost the reduction of Cu²⁺ to Cu⁺ in the Fenton-like cycle and accelerate the Z-scheme electron flow from CuO to g-C₃N₄, leading to synergistic enhancement of the catalytic performance. This work would afford a feasible strategy to develop reinforced solar energy-assisted photo-Fenton-like catalysis systems for water remediation.

Enhanced activation of H2O2 by bimetallic Cu2SnS3: A new insight for Cu (II)/Cu (I) redox cycle promotion

HYPOTHESIS

Despite that the development of Cu₂SnS₃ (CTS) catalyst has attracted increasing interests, few study has reported to investigate its heterogeneous catalytic degradation of organic pollutants in a Fenton-like process. Furthermore, the influence of Sn components towards Cu (II)/Cu (I) redox cycling in CTS catalytic systems remains a fascinating research.

EXPERIMENTS

In this work, a series of CTS catalysts with controlled crystalline phases were prepared via a microwave-assisted pathway and applied in the H₂O₂ activation for phenol degradation. The efficiency of phenol degradation in CTS-1/H₂O₂ system (CTS-1: the molar ratio of Sn (copper acetate) and Cu (tin dichloride) is determined to be Sn:Cu = 1:1) was systematically investigated by controlling various reaction parameters including H₂O₂ dosage, initial pH and reaction temperature. We discovered that Cu₂SnS₃ exhibited superior catalytic activity to the contrast monometallic Cu or Sn sulfides and Cu (I) acted as the dominant active sites. The higher Cu (I) proportions conduce to the higher catalytic activities of CTS catalysts. Quenching experiments and electron paramagnetic resonance (EPR) further proved that the activation of H₂O₂ by CTS catalyst produces reactive oxygen species (ROS) and subsequently leads to degradation of the contaminants. A reasonable mechanism of enhanced H₂O₂ activation in Fenton-like reaction of CTS/H₂O₂ system was proposed for phenol degradation by investigating the roles of copper, tin and sulfur species.

FINDINGS

The developed CTS acted as a promising catalyst in Fenton-like oxidation progress for phenol degradation. Importantly, the copper and tin species contribute to a synergetic effect for the promotion of Cu (II)/Cu (I) redox cycle, which thus enhanced the activation of H₂O₂. Our work may offer new insight on the facilitation of Cu (II)/Cu (I) redox cycle in Cu-based Fenton-like catalytic systems.

Complexation and degradation of tetracycline by activation of molecular oxygen with biochar-supported nano-zero-valent copper composite

Nano-zero-valent copper (nZVC) is a superior molecular oxygen (O₂) activator for the abatement of organic pollutants due to its high electron utilization rate. However, the activation efficiency of O₂ is compromised by the agglomeration tendency of nZVC particles and the concomitant reduction of the available active sites. To address this problem, the biochar (BC) with porous structure and abundant surface functional groups is utilized to disperse and stabilize nZVC for O₂ activation (simplified as the nZVC/BC/O₂ system) for efficient removal of tetracycline (TC). The nZVC/BC composite possesses a high specific area with well-distributed nZVC particles on the BC surface, which guarantees the superior dispersion and high reactivity in the activation of O₂. The efficacy of the nZVC/BC/O₂ system for TC abatement is evaluated and the underlying mechanism is elucidated. The results show that nZVC/BC/O₂ system can achieve excellent removal of TC with the efficiencies of more than 85% in the pH range of 4.0-9.0, which originated from the combined action of complexation and degradation. The degradation is dominated by reactive oxygen species (ROS) including •OH, •O₂^- and ¹O₂ generated by Cu⁰/Cu⁺ activated O₂ while the generation of Cu²⁺ via oxygen oxidation on the surface of nZVC/BC can remove TC by complexation adsorption. This study highlights the complexation and degradation in the removal of TC and can be expected to exhibit application prospects in the water and wastewater treatment.

Citric acid modified ultrasmall copper peroxide nanozyme for in situ remediation of environmental sulfonylurea herbicide contamination

Herbicide residues in the environment threaten high-quality agriculture and human health. Consequently, in situ remediation of herbicide contamination is vital. We synthesized a novel self-catalyzed nanozyme, ultrasmall (2-3 nm) copper peroxide nanodots modified by citric acid (CP@CA) for this purpose, which can break down into H₂O₂ and Cu²⁺ in water or soil. Ubiquitous glutathione reduces Cu²⁺ into Cu⁺, which promotes the decomposition of H₂O₂ into •OH through a Fenton-like reaction under mild acid conditions created by the presence of citric acid. The generated •OH efficiently degrade nicosulfuron in water and soil, and the maximum degradation efficiency could be achieved at 97.58% in water at 56 min. The possible degradation mechanisms of nicosulfuron were proposed through the 25 intermediates detected. The overall ecotoxicity of the nicosulfuron system was significantly reduced after CP@CA treatment. Furthermore, CP@CA had little impact on active components of soil bacterial community. Moreover, CP@CA nanozyme could effectively remove seven other sulfonylurea herbicides from the water. In this paper, a high-efficiency method for herbicide degradation was proposed, which provides a new reference for the in situ remediation of herbicide pollution.

Enhanced decomplexation of Cu-EDTA and simultaneous removal of Cu(II) by electron beam irradiation accompanied with autocatalytic fenton-like reaction: Synergistic performance and mechanism

Widely existing heavy metal complexes with high stability and poor biodegradability are intractable to be eliminated by conventional methods. In this study, electron beam (EB) irradiation characterized by rapidly producing strong oxidizing radicals was employed to effectively decompose Cu-ethylenediaminetetraacetic acid (Cu-EDTA) with almost complete elimination at 5 kGy. In terms of heavy metal removal, EB irradiation at relatively low doses was insufficient to remove copper ions, which was only 17.2% under 15 kGy. However, with the extra addition of 8 mM H₂O₂, such an irradiation dose could result in 99.0% copper ions removal. Mechanism analysis indicated that EB irradiation combined with spontaneously induced Fenton-like reactions were responsible for its excellent performance. The prime function of EB irradiation was to destroy the structure of Cu-EDTA with in-situ produced ·OH, and the subsequent released Cu-based intermediates could activate H₂O₂ to initiate autocatalytic chain reactions, correspondingly accelerating the degradation of complexes and the liberation of metal ions. Highly oxidative ·OH and O₂·^- were demonstrated as main active species acted on different positions of Cu-EDTA to realize gradual decarboxylation, synchronously generating low molecular weight compounds. XRD and XPS analysis showed that the released copper ions were mainly precipitated in the form of CuO, Cu(OH)₂ and Cu₂(OH)₂CO₃. In general, EB/H₂O₂ was an adoptable strategy for the disposal of such refractory heavy metal complexes.

Regioselective protein oxidative cleavage enabled by enzyme-like recognition of an inorganic metal oxo cluster ligand

Oxidative modifications of proteins are key to many applications in biotechnology. Metal-catalyzed oxidation reactions efficiently oxidize proteins but with low selectivity, and are highly dependent on the protein surface residues to direct the reaction. Herein, we demonstrate that discrete inorganic ligands such as polyoxometalates enable an efficient and selective protein oxidative cleavage. In the presence of ascorbate (1 mM), the Cu-substituted polyoxometalate K₈[Cu²⁺(H₂O)(α₂-P₂W₁₇O₆₁)], (Cu^IIWD, 0.05 mM) selectively cleave hen egg white lysozyme under physiological conditions (pH =7.5, 37 °C) producing only four bands in the gel electropherogram (12.7, 11, 10, and 5 kDa). Liquid chromatography/mass spectrometry analysis reveals a regioselective cleavage in the vicinity of crystallographic Cu^IIWD/lysozyme interaction sites. Mechanistically, polyoxometalate is critical to position the Cu at the protein surface and limit the generation of oxidative species to the proximity of binding sites. Ultimately, this study outlines the potential of discrete, designable metal oxo clusters as catalysts for the selective modification of proteins through radical mechanisms under non-denaturing conditions.

Novel catalysts with multivalence copper for organic pollutants removal from wastewater with excellent selectivity and stability in Fenton-like process under neutral pH conditions

Fenton-like reaction has been widely used for organics degradation. However, most Fenton-like reaction works at low pH range (pH < 4) with uncontrollable selectivity of hydroxyl radicals from H₂ O₂ activation, and unsatisfied catalyst stability, which is compromised advanced oxidation performance for water/wastewater treatments. In this work, to solve the drawbacks, novel copper catalysts were fabricated via hydrogen reduction/calcination of Cu²⁺ -supported Al/MCM-41 with precisely controllable copper valence state. Compared with catalysts with monovalence copper (i.e., CuO, Cu, and Cu²⁺ ), the obtained catalysts with multivalence copper present higher selectivity, excellent stability towards •OH radical pathways, and outperformance in pCBA degradation efficiency at neutral state. In addition, the fabricated catalysts also exhibited excellent phenol removal efficiency (75.5%) and H₂ O₂ utilization efficiency (47.9%) within neutral environment. Moreover, the degradation efficiency of phenol approaches to 100% within only 2 h. The catalyst also shows good stability for organic pollutants removal, which shows good potential in catalytic oxidation for phenolic compounds-containing wastewater in Fenton-like reaction, especially under neutral pH conditions. PRACTITIONER POINTS: Multivalence copper presents great potentials for organic compounds removal at neutral condition. Multivalence copper shows higher selectivity toward •OH and good stability at neutral condition. Multivalence copper exhibiters outperformed phenol removal efficiency at neutral condition.

Purification Technologies for NOx Removal from Flue Gas: A Review

Nitrogen oxide (NOx) is a major gaseous pollutant in flue gases from power plants, industrial processes, and waste incineration that can have adverse impacts on the environment and human health. Many denitrification (de-NOx) technologies have been developed to reduce NOx emissions in the past several decades. This paper provides a review of the recent literature on NOx post-combustion purification methods with different reagents. From the perspective of changes in the valence of nitrogen (N), purification technologies against NOx in flue gas are classified into three approaches: oxidation, reduction, and adsorption/absorption. The removal processes, mechanisms, and influencing factors of each method are systematically reviewed. In addition, the main challenges and potential breakthroughs of each method are discussed in detail and possible directions for future research activities are proposed. This review provides a fundamental and systematic understanding of the mechanisms of denitrification from flue gas and can help researchers select high-performance and cost-effective methods.

Degradation of Methylene Blue with a Cu(II)-Quinoline Complex Immobilized on a Silica Support as a Photo-Fenton-Like Catalyst

A Cu(II)-quinoline complex immobilized on a silica support was prepared to enhance the degradation of dyes. Mesoporous silica functionalized with this Cu(II) complex was turned into a photo-Fenton-like catalyst. Various techniques were used to characterize the resulting material, and the catalytic activity was determined by the degradation of methylene blue (MB) under UV light irradiation. The Cu(II) ion was successfully coordinated to the quinoline ligand on a silica support. The dye degradation investigation has shown that 95% of the dye was degraded in 2.5 h. The active radical species involved in the reaction were OH^• and O₂ ^•-, suggesting that a peroxo complex intermediate might be formed during degradation processes.

Coordination-driven Cu-based Fenton-like process for humic acid treatment in wastewater

Fenton oxidation process is effective in organic pollutant degradation during wastewater treatment, but subject to narrow pH range and secondary pollution. In this work, an application-promising alternative, i.e., coordination-driven Cu-based Fenton-like process, was proposed for wastewater treatment using humic-acid (HA) as the target contaminant. The results showed that the removal of HA through Cu-based Fenton-like process can reach 70% under the condition of pH 8.0, 146.8 mmol/L H₂O₂, 146.8 μmol/L Cu (II), 50 °C, and 4 h. Addition of Cl^- could significantly accelerate the reaction process through coordination with copper ions, while HCO₃^- and P₂O₇^4- exhibited opposite effects. Increasing temperature is also beneficial for advancing the reaction, and the removal of HA followed pseudo-first-order kinetics. Fluorescence spectroscopic analyses showed that the removal of HA experienced a two-stage process, i.e., oxidation followed by degradation, which is dependent of the presence of coordination ions. Parallel factor analysis was used to characterize the change of fluorescence components. Three fluorescent components, i.e., terrestrial humic-like, UV/visible terrestrial humic-like and protein-like component were identified, all of which were effectively removed. This study deepens our understanding on Cu-based Fenton-like process, and may provide a promising technology for refractory wastewater treatment.

Selenization governs the intrinsic activity of copper-cobalt complexes for enhanced non-radical Fenton-like oxidation toward organic contaminants

Non-radical oxidation pathways in the Fenton-like process have a superior catalytic activity for the selective degradation of organic contaminants under complicated water matrices. Whereas the synthesis of high-performance catalysts and research on reaction mechanisms are unsatisfactory. Herein, it was the first report on copper-cobalt selenide (CuCoSe) that was well-prepared to activate hydrogen peroxide (H₂O₂) for non-radical species generation. The optimized CuCoSe+H₂O₂ system achieved excellent removal of chlortetracycline (CTC) in 10 min at neutral pH along with pleasing reusability and stability. Moreover, it exhibited great anti-interference capacity to inorganic anions and natural organic matters even in actual applications. Multi-surveys verified that singlet oxygen (¹O₂) was the dominant active species in this reaction and electron transfer on the surface-bound of CuCoSe and H₂O₂ likewise played an important role in direct CTC oxidation. Where the synergetic metals of Cu and Co accounted for the active sites, and the introduced Se atoms accelerated the circulation efficiency of Co³⁺/Co²⁺, Cu²⁺/Cu⁺ and Cu²⁺/Co²⁺. Simultaneously, the produced Se/O vacancies further facilitated electron mediation to enhance non-radical behaviors. With the aid of intermediate identification and theoretical calculation, the degradation pathways of CTC were proposed. And the predicted ecotoxicity indicated a decrease in underlying environmental risk.

Photocatalytic remediation of methylene blue and antibacterial activity study using Schiff base-Cu complexes

This work describes the design of novel Cu(II) complexes and their application in the photocatalytic degradation of methylene blue (MB). The same photocatalyst exhibits antibacterial activity against Escherichia coli (gram-negative) and Bacillus circulans (gram-positive). The characterisation of the photocatalysts has been done by several up-to-date physical methods. The rationale behind the photocatalysts' beneficial intervention is discussed in this study. Statistical analysis of the degradation of MB is done using a one-way ANOVA, and the significance of means is determined by a multiple comparison test using Turkey HSD. Also, the degradation of MB follows pseudo first-order kinetics with high correlation coefficient values (R² > 0.95), making them useful as simple and low-cost organic dye degradation agents.

Antibacterial and plant growth-promoting properties of novel Fe3O4/Cu/CuO magnetic nanoparticles

In this work, an Fe₃O₄/Cu/CuO (FC) antibacterial nano-agent was synthesized in a “one-pot” approach using copper sulfate and ferric chloride as raw materials, and it was studied using TEM, XRD, XPS, UV-vis, and VSM methods. The antibacterial activity and mechanism of FC were studied, using a commercially available Bordeaux mixture as a control. The effects of an FC on mung bean development and its toxicity to human mammary epithelial cells were also investigated. The results revealed that FC could break the cell walls of E. coli and S. aureus, quadrupling the antibacterial activity of the Bordeaux combination. Furthermore, it was shown that FC might improve the germination, root development, and chlorophyll content of mung bean seeds while being 1/8 as hazardous to human mammary epithelial cells as the Bordeaux combination. The as-prepared FC can replace the Bordeaux combination in the management of agroforestry pathogens.

In this work, an Fe₃O₄/Cu/CuO (FC) antibacterial nano-agent was synthesized in a “one-pot” approach using copper sulfate and ferric chloride as raw materials, and it was studied using TEM, XRD, XPS, UV-vis, and VSM methods.

Enhanced ferrate oxidation of organic pollutants in the presence of Cu(II) Ion

In this study, we found that the introduction of Cu(II) (several μM, close to the concentration level of some real water/wastewater) in ferrate (Fe(VI)) oxidation can remarkably accelerate the abatement of various organic pollutants under slightly alkaline conditions. The results show that 5 μM sulfamethoxazole (SMX) can be completely degraded by Fe(VI) (50 μM) in the presence of 20 μM Cu(II) within 10 min at pH 8.0, which was 1.65 times higher than that by Fe(VI) alone. High-valent iron intermediates (i.e. Fe(V), Fe(IV)) and Cu(III) were generated as reactive species in the Cu(II)/Fe(VI) system, all of which contributed to the enhanced oxidation of SMX. Common water components, except for HCO₃^- and humic acid, exhibited no influence on SMX removal. Additionally, the enhanced removal of SMX by Cu(II)/Fe(VI) was also observed in real water with the benefit of total removal of Cu(II) by the ferrate resultant particles. Due to the presence of highly reactive and selective oxidant, the Cu(II)/Fe(VI) system could react readily with organic pollutants containing electron-rich moieties, such as phenol, olefin or amino groups. This study provided a simple, selective, and practical strategy for the abatement of organic pollutants and a simultaneous removal of Cu(II).

Copper(II) containing chitosan hydrogel as a heterogeneous Fenton-like catalyst for production of hydroxyl radical: A quantitative study

The Fenton reaction, which generate hydroxl radical as a powerful oxidizing agent, is of interest due to its role in biological systems and wastewater treatment. However, unlike the ferrous/ferric system that is active only in acidic condition, the copper ion can operate over a wide pH range as a Fenton-like system. In this research a copper containing hydrogel (Cu/CH) was prepared by loading the Cu²⁺ ions into a hydrogel based on chitosan, acrylamide (AAM), and acrylic acid (AA), and used for production of hydroxyl radical in a Fenton-like reaction. The prepared catalyst was characterized by using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and energy dispersive X-ray analysis (EDAX). The catalytic activity of the hydrogels was quantitatively investigated by measuring the hydroxyl radical using the photoluminescence (PL) technique. Various parameters such as contact time, amount of metal ion, dose of hydrogen peroxide, and dose of Cu/CH were investigated. A catalytic mechanism was proposed for production of hydroxyl radical. The reusability studies showed that the Cu/CH can be reused several times without loss of its catalytic activity. In addition, various metal ions were loaded into the hydrogel and their performance in the production of hydroxyl radical were investigated.

Metallic Copper-Containing Composite Photocatalysts: Fundamental, Materials Design, and Photoredox Applications

Semiconductor photocatalysis has long been regarded as a potential solution to tackle the energy and environmental challenges since the first discovery of water splitting by TiO₂ almost 50 years ago. The past few years have seen a tremendous flurry of research interest in the modification of semiconductors because of their shortcomings in the aspects of solar harvesting, electron-hole pairs separation, and utilization of photogenerated carriers. Among the various strategies, the introduction of metallic copper into the photocatalysis system can not only enhance the absorption of sunlight and the separation efficiency of photogenerated electrons and holes, but also increase the adsorption ability of substrate and the number of active sites, so as to realize the high solar to chemical energy conversion efficiency. This review focuses on the rational design of copper-based composites and their applications in photoredox catalysis. First, the preparation methods of metallic copper-containing composites are discussed. Then, the applications of different types of copper-based composites in the photocatalytic removal of pollutants, splitting of water to hydrogen production, reduction of carbon dioxide, and conversion of organic matter are introduced. Finally, the opportunities and challenges in the design and synthesis of copper-based composites and their applications in the photocatalysis are prospected.

The mineralization ability of a chloride-resistant γ-Cu2(OH)3Cl Fenton catalyst: effects of the cation type, salt concentration and organic pollutants

A chloride-resistant heterogeneous Fenton catalyst γ-Cu2(OH)3Cl is used to mineralize aromatic organics (phenol, bisphenol A, salicylic acid and aniline) in saline solutions with different salts (MgCl2, CaCl2, NaCl and KCl) and concentrations.

Metal-organic framework-encapsulated nanoparticles for synergetic chemo/chemodynamic therapy with targeted H2O2 self-supply

Nanocatalytic cancer therapy based on chemodynamic therapy, which converts hydrogen peroxide (H2O2) into toxic reactive oxygen species via the Fenton-like reaction, is regarded as a promising therapeutic strategy due to its specific response toward the tumor microenvironment (TME). However, the H2O2 concentration in TME (100 μM to 1 mM) is insufficient and introducing enough H2O2 or H2O2-generating agents is challenging. In view of this, we report a drug delivery system, CaO2/DOX@Cu/ZIF-8@HA (CDZH), which is capable of targeted H2O2 self-supply and exhibits outstanding chemo/chemodynamic synergetic therapy capability. CaO2/DOX@Cu/ZIF-8@HA is synthesized by fabricating biodegradable Cu/ZIF-8 shell-encapsulated CaO2 nanoparticles, loading chemotherapy drug doxorubicin, and coating a hyaluronic acid shell. In an acidic tumor microenvironment, the CDZH nanostructures targeted the release of doxorubicin, Cu2+, and CaO2. Doxorubicin affects chemotherapy and bioimaging, and CaO2 supplies H2O2 through a Cu-Fenton-like reaction to generate hydroxyl radicals with high oxidation activity for chemodynamic therapy. In brief, the drug delivery system combined targeted H2O2 self-supply and targeted bioimaging possess the potential of an efficient synergistic strategy for chemodynamic therapy and chemotherapy.

3D Printing and Chemical Dealloying of a Hierarchically Micro- and Nanoporous Catalyst for Wastewater Purification

Hierarchically porous-structured materials show tremendous potential for catalytic applications. In this work, a facile method through the combination of three-dimensional (3D) printing and chemical dealloying was employed to synthesize a nanoporous-copper-encapsulating microporous-diamond-cellular-structure (NPC@DCS) catalyst. The developed NPC@DCS catalyst was utilized as a heterogeneous photo-Fenton-like catalyst where its catalytic applications in the remediation of organic wastewater were exemplified. The experimental results demonstrated that the NPC@DCS catalyst possessed a remarkable degradation efficiency in the removal of rhodamine B with a reaction rate of 8.24 × 10^-2 min^-1 and displayed attractive stability, durability, mineralization capability, and versatility. This work not only manifests the applicability of the proposed NPC@DCS catalyst for wastewater purification in practical applications but also is anticipated to inspire the incorporation of the 3D printing technology and chemical synthesis to design high-performance metal catalysts with tunable hierarchical micro- and nanopores for functional applications.

Acceleration of the thermal degradation of PETN in the microdroplets flow reactor

Thermal degradation of pentaerythritol tetranitrate (PETN) was investigated in microdroplets within a heated capillary used as a flow reactor. The thermal degradation was monitored by aerodynamic thermal breakup droplet ionization mass spectrometry. It was shown that the PETN degradation in microdroplets occurs much faster than the bulk reaction (by 4-5 orders of magnitude). The effect of the capillary material [stainless steel (Fe, Cr), copper (Cu), or fused quartz (SiO₂)] on the thermal PETN degradation in microdroplets of water or acetonitrile was studied next. The capillary material affected the rate of thermal PETN degradation much more weakly than did the use of microdroplets (pure Cu was most conducive to the degradation). Kinetic parameters (activation energy and the frequency factor) of the PETN degradation for all the studied materials of the flow-through reactor and the solvents were estimated under the assumption that the thermal degradation is a first-order reaction. Implications of the acceleration of PETN degradation in microdroplets are discussed.

Degradation of sulfamerazine by a novel CuxO@C composite derived from Cu-MOFs under air aeration

Most metal-organic frameworks (MOFs) are synthesized from carboxylate and metal precursors by hydrothermal process, which will consume a large amount of solvent and carboxylate. To address this issue, a new strategy for Cu-based MOFs was developed, in which the Cu-based MOFs was obtained by using abundant natural polymer (tannic acid) as one of the precursors and using high-energy ball milling to achieve a self-assembly of tannic acid and copper sulfate. Based on this strategy, a novel Cu-based MOFs derivative (Cu_xO@C composite) was synthesized by high-temperature sintering of Cu-based MOFs and used for sulfamerazine (SMR) removal via O₂ activation. The BET specific surface area and average pore size of Cu_xO@C composite were 110.34 m² g^-1 and 21.06 nm, respectively, which made Cu_xO@C composite had the maximum adsorption capacity (Q_max) for SMR of 104.65 mg g^-1 and favored the subsequent degradation of SMR. The results from XRD and XPS indicated that Cu_xO@C composite contained a lot of Cu⁰ and Cu₂O with the sizes of 76.6 nm and 9.8 nm, respectively, which led to its high performance of O₂ activation. The removal efficiency of SMR and 90.2% TOC achieved 100% and 90.2%, respectively in the Cu_xO@C/air system at initial pH of 4.0, air flow rate of 100 mL min^-1, Cu_xO@C dosage of 1 g L^-1 and reaction time of 30 min. Reactive species, including H₂O₂, OH and O₂^- radicals were detected in the Cu_xO@C/air system, and OH and O₂^- were mainly responsible for the degradation of SMR.