The hazardous threat of Bisphenol A: Toxicity, detection and remediation

β-cyclodextrin/spiropyran-functionalized optical-driven hydrogel film for bisphenol A detection in food packaging

Bisphenol A (BPA), an endocrine disruptor, is widely used in food packaging materials, including drink containers. Sensitive detection of BPA is crucial to food safety. Herein, we have developed a novel optical-driven hydrogel film sensor for sensitive BPA detection based on the displacement of spiropyran (SP) from β-cyclodextrin (β-CD) cavity by BPA followed by the photochromism of the released SP. The released SP converts to the ring-opened merocyanine form which shows an enhanced red fluorescence in the dark. The sensor demonstrates a linear detection range from 0.1 to 20 μg mL-1 with a limit of detection at 0.027 μg mL-1 and a limit of quantification at 0.089 μg mL-1. Notably, the proposed β-CD/SP hydrogel can be reused due to the reversible isomerization of SP and the reversible host-guest interaction. This sensor also shows good performance for BPA determination in real samples, indicating its great potential for food safety monitoring.

Bisphenol A and bisphenol AF co-exposure induced apoptosis of human ovarian granulosa cells via mitochondrial dysfunction

Bisphenol A (BPA) is a synthetic chemical primarily utilized in the manufacturing of polycarbonate plastics and epoxy resins that are present in various consumer products. While the BPA impacts on female reproductive toxicity have been widely investigated, very little is currently identified about the mixed toxicity of BPA and bisphenol AF (BPAF), another common BPA derivative that is used in many industrial applications. In this study, we assessed the effect of co-exposure of BPA (30 and 50 μM) and BPAF (3 and 5 μM) on mitochondrial dysfunction in human granulosa cells (KGN cells) for 24 h. Our results exhibited that high-concentration bisphenol individual or their mixture exposure of KGN cells induced significant mitochondrial dysfunction by reducing mitochondrial mass, reducing ATP production, and damaging the mitochondrial respiratory chain. In addition, we found that the combination of BPA and BPAF significantly induced mitochondrial stress by increasing calcium levels and the production of ROS in mitochondria. Mitochondrial stress induced by BPA and BPAF was determined to be a mechanism that promoted cell apoptosis after pretreating the cells with the mitochondrial-targeted antioxidant and the calcium chelator. Our results provide novel evidence of the cytotoxicity of mixtures of different bisphenol compounds.

A new understanding of the regulatory mechanism by which Fe/Mn nanoparticles boost Bisphenol A removal using Comamonas testosteroni

Green synthesized iron/manganese nanoparticles (Fe/Mn NPs), acted as an exogenous promoter to enhance the lignin-degrading bacteria Comamonas testosteroni FJ17 resulting in more efficient removal of bisphenol A (BPA). Batch experiments demonstrated that removal efficiency of BPA via cells at a BPA concentration of 10 mg·L-1 increased by 20.9 % when exposed to 100 mg·L-1 Fe/Mn NPs after 48 h (93.63 %) relative to an unexposed control group (72.70 %). TEM and 3D-EEM analysis confirmed that the cell membrane thickness increased from 47 to 80 nm under Fe/Mn NPs exposure, and the TB-EPS secretion was promoted. Meanwhile, Fe/Mn NPs facilitated greater electron transfer capacity of c-cytochrome (0.55 V reduction peak) and an unknown cytochrome substance (0.7 V oxidation peak) on the surface of cells. Studies of the effect of Fe/Mn NPs on both the growth and activity of laccase cells showed that both biomass and laccase secretion increased significantly during the logarithmic growth period (6-36 h). LC-MS analysis and toxicity assessment indicated that Fe/Mn NPs decreased the degradation time of BPA and efficiently reduced the toxicity of its by-products. Transcriptomic analysis revealed 315 up-regulation of the key genes associated with energy supply, membrane translocation, and metabolic pathways upon exposure to Fe/Mn NPs. Such as MFS transporter (2.27-fold), diguanylate cyclase (1.76-fold) and protocatechuate-3,4-dioxygenase (1.62-fold). Overall, Fe/Mn NPs accelerated proliferation by enhancing metabolic capacity and nutrient transport processes, which serves to improve the efficiency of BPA removal.

Bisphenol mixtures, metal mixtures and type 2 diabetes mellitus: Insights from metabolite profiling

BACKGROUND

Little is known about the combined effect of bisphenol mixtures and metal mixtures on type 2 diabetes mellitus (T2DM) risk, and the mediating roles of metabolites.

METHODS

The study included 606 pairs of T2DM cases and controls matched by age and sex, and information of participants was collected through questionnaires and laboratory tests. Serum bisphenol and plasma metal concentrations were measured using ultra-performance liquid chromatography-mass spectrometry (UPLC-MS/MS) and inductively coupled plasma-mass spectrometry (ICP-MS), respectively. Widely targeted metabolomics was employed to obtain the serum metabolomic profiles. Conditional logistic regression models were used to assess the single associations of bisphenols and metals with T2DM risk after multivariable adjustment. Additionally, the joint effects of bisphenol mixtures and metal mixtures were examined using quantile-based g-computation (QG-C) models. Furthermore, differential metabolites associated with T2DM were identified, and mediation analyses were performed to explore the role of metabolites in the associations of bisphenols and metals with T2DM risk.

RESULTS

The results showed bisphenol mixtures were associated with an increased T2DM risk, with bisphenol A (BPA) identified as the primary contributor. While the association between metal mixtures and T2DM remained inconclusive, cobalt (Co), iron (Fe), and zinc (Zn) showed the highest weight indices for T2DM risk. A total of 154 differential metabolites were screened between the T2DM cases and controls. Mediation analyses indicated that 9 metabolites mediated the association between BPA and T2DM, while L-valine mediated the association between Zn and T2DM risk.

CONCLUSIONS

The study indicated that BPA, Co, Fe, and Zn were the primary contributors to increased T2DM risk, and metabolites played a mediating role in the associations of BPA and Zn with the risk of T2DM. Our findings contribute to a better understanding of the mechanisms underlying the associations of bisphenols and metals with T2DM.

Microplastic ingestion by sea turtles around Tokyo Bay: Level of water pollution influences ingestion amounts

We investigated the contents inside the esophagus and stomach of turtles inside and outside of the Tokyo Bay area, which face high and low risks of microplastic (MP) exposure, respectively. 65 synthetic particles were recovered from 8 out of 22 turtles, using ATR-FTIR followed by density separation with calcium chloride solution. Statistical analysis indicated that turtles in high-risk areas ingested significantly more MPs than those in low-risk areas. As the inflow of MPs from major rivers influences pollution levels in the ocean, the results of this study highlight the importance of major rivers for MP ingestion by turtles. Additionally, we discussed the current methodology's shortcomings and addressed scope for subsequent research, along with suggestions on future conservation.

Snowflake Cu2S@ZIF-67: A novel heterostructure substrate for enhanced adsorption and sensitive detection in BPA

Developing semiconductor substrates with superior stability and sensitivity is challenging in surface-enhanced Raman scattering (SERS) research. Here, a snowflake Cu2S@ZIF-67 heterostructure was fabricated using a straightforward method, exhibiting a notable enhancement factor of 9.0 × 109 and a limit of detection (LOD) of 10-14 M for methylene blue (MB). In addition, the Cu2S@ZIF-67 heterostructure substrate demonstrates outstanding homogeneity (relative standard deviation (RSD) = 9.2%) and stability (120 days). Employing Cu2S generates highly sensitive hotspots via an electromagnetic (EM) mechanism, and the growth of ZIF-67 on its surface augments the adsorption capacity and charge transfer capability (chemical mechanism, CM), thereby enhancing the SERS detection sensitivity. Furthermore, the Cu2S@ZIF-67 heterostructure, which was used as a SERS substrate, facilitated the detection of bisphenol A (BPA) with an LOD of 10-11 M. The Cu2S@ZIF-67 heterostructure substrate has excellent selectivity and anti-interference, which is very suitable for BPA detection in complex environment applications. The accuracy of the Cu2S@ZIF-67 heterostructure as a SERS substrate for detecting BPA in real water samples (water bottles, tap water, and pure milk) was confirmed by comparison with high-performance liquid chromatography (HPLC). These results demonstrate that through the rational design of heterostructures can achieve the quantitative and accurate detection of hazardous substances in food and the environment can be achieved.

Spatial distribution, source identification, and potential risks of 14 bisphenol analogues in soil under different land uses in the megacity of Chengdu, China

This study explored the levels, distribution, potential sources, ecological risks and estrogenic activities of 14 bisphenol analogues (BPs) in soil under eight land-use types in the megacity of Chengdu, China. Eleven BPs were detected in the soil samples and the total concentrations ranged from 32.3 to 570 ng/g d.w. Levels of bisphenol BP (BPBP) in the soil (up to 208 ng/g d.w.) only second to the most dominant compound bisphenol A (BPA) were found. Relatively higher Σ14BP accumulation in the soil was observed in the commercial and residential areas (median: 136 ng/g d.w. and 131 ng/g d.w.) compared with agricultural area (median: 67.5 ng/g d.w.). Source identification indicated the role of atmospheric particulate deposition and consecutive anthropogenic activities in BP emission. The ecotoxicity assessment implied that BPA, bisphenol S (BPS), bisphenol F (BPF) and bisphenol PH (BPPH) might pose low to medium risk to the ecosystem due to their extensive use and biological effects. The calculated 17β-estradiol equivalents of BPs were in the range of 0.501-7.74 pg E2/g d.w, and the estrogenic activities were inferior to those contributed by natural estrogens in the soil.

Leachates from plastics and bioplastics reduce lifespan, decrease locomotion, and induce neurotoxicity in Caenorhabditis elegans

Plastic pollution continuously accumulates in the environment and poses a global threat as it fragments into microplastics and nanoplastics that can harm ecosystems. To reduce the accumulation of microplastic and nanoplastic pollution, bioplastics made from biodegradable materials are promoted as a more sustainable alternative because it can degrade faster than plastics. However, plastics also leach out chemicals as they degrade and disintegrate, but the potential toxicity of these chemicals leaching out from plastics and especially bioplastics is poorly explored. Here, we determined the composition of leachates from plastics and bioplastics and tested their toxicity in Caenorhabditis elegans. LC-MS analysis of the leachates revealed that bioplastics leached a wider array of chemicals than their counterpart plastics. Toxicity testing in our study showed that the leachates from plastics and bioplastics reduced lifespan, decreased locomotion, and induced neurotoxicity in C. elegans. Leachates from bioplastics reduced C. elegans lifespan more compared to leachates from plastics: by 7%-31% for bioplastics and by 6%-15% for plastics. Leachates from plastics decreased locomotion in C. elegans more compared to leachates from bioplastics: by 8%-34% for plastics and by 11%-24% for bioplastics. No changes were observed in the ability of the C. elegans to respond to mechanical stimuli. The leachates induced neurotoxicity in the following neurons at varying trends: cholinergic neurons by 0%-53% for plastics and by 30%-42% for bioplastics, GABAergic neurons by 3%-29% for plastics and by 10%-23% for bioplastics, and glutamatergic neurons by 3%-11% for plastics and by 15%-29% for bioplastics. Overall, our study demonstrated that chemicals leaching out from plastics and bioplastics can be toxic, suggesting that both plastics and bioplastics pose ecotoxicological and human health risks.

Bisphenol S and Its Chlorinated Derivatives in Indoor Dust and Human Exposure

Bisphenol S (BPS), an environmental endocrine disruptor, has been identified in global environmental matrices. Nevertheless, limited studies have investigated the presence of chlorinated analogues of BPS (Clx-BPSs) with potential estrogenic activities in environmental matrices. In this study, the occurrence of BPS and five types of Clx-BPSs was characterized in indoor dust (n = 178) from Hangzhou City. BPS was measurable in 94% of indoor dust samples, with an average level of 0.63 μg/g ( Collapse

Key Words

• BPS
• chlorinated BPS
• human intake
• indoor dust
• inhalation exposure

Collapse

MESH Headings Collapse

Grants

• LY21B070006 Natural Science Foundation of Zhejiang Province
• LR23D030001 Natural Science Foundation of Zhejiang Province

Collapse

Affiliation(s)

Yi Qian Department of Environmental Engineering, Taizhou University, Taizhou 318000, China
Jianqiang Zhu Department of Environmental Engineering, Taizhou University, Taizhou 318000, China
Ruyue Guo Key Laboratory of Microbial Technology for Industrial Pollution Control of Zhejiang Province, College of Environment, Zhejiang University of Technology, Hangzhou 310032, China
Hangbiao Jin Key Laboratory of Microbial Technology for Industrial Pollution Control of Zhejiang Province, College of Environment, Zhejiang University of Technology, Hangzhou 310032, China

Collapse

Highly efficient hydrophobic nanocomposite in the decontamination of micropollutants and bacteria from aqueous wastes: A sustainable approach

Micro-pollutants (specifically antibiotics and personal care products) and potential bacterial contamination pose a severe threat to human health and marine life. The study derives indigenous novel fibrous hydrophobic nanocomposite, efficient in decontaminating the micro-pollutants (tetracycline (TC) and bisphenol A (BPA)) and potential pathogens (S. pyogenes and E. coli) from aqueous wastes. A facile method synthesizes the fibrous attapulgite (ATP)- poly(4-vinylpyridine-co-styrene) (PVP) framework decorated in situ with the Ag0 nanoparticles (ATP@PVP/Ag0). A greener method using the Artocarpus heterophyllus leaf extract derives the Ag0(NPs). Various analytical methods extensively characterize the materials. A comprehensive study that includes pH, concentration, background electrolytes, and ionic strength reveals the sorptive removal insights of TC and BPA utilizing the ATP@PVP solid. The elimination of tetracycline (TC) and bisphenol A (BPA) agrees well with the pseudo-second-order kinetics. The pH 3.07 and 6.06 favor removing TC and BPA with the capacity of 10.86 mg/g and 17.36 mg/g at 25 °C. The hydrogen bonding and hydrophobic interactions predominate the sorption mechanism, and the material shows remarkable stability and reusability in repeated sorption/desorption operations. Similarly, the natural water implications and flow-bed system show fair applicability of solid in decontaminating the TC and BPA in an aqueous medium. Further, the material ATP@PVP/Ag0 exhibits very high inhibition of potential pathogens S. pyogenes and E. coli and optimizes the solid dose and solution pH.

Microfluidic sensors for the detection of emerging contaminants in water: A review

In recent years, numerous emerging contaminants have been identified in surface water, groundwater, and drinking water. Developing novel sensing methods for detecting diverse emerging pollutants in water is urgently needed, as even at low concentrations, these pollutants can pose a serious threat to human health and environmental safety. Traditional testing methods are based on laboratory equipment, which is highly sensitive but complex to operate, costly, and not suitable for on-site monitoring. Microfluidic sensors offer several benefits, including rapid evaluation, minimal sample usage, accurate liquid manipulation, compact size, automation, and in-situ detection capabilities. They provide promising and efficient analytical tools for high-performance sensing platforms in monitoring emerging contaminants in water. In this paper, recent research advances in microfluidic sensors for the detection of emerging contaminants in water are reviewed. Initially, a concise overview is provided about the various substrate materials, corresponding microfabrication techniques, different driving forces, and commonly used detection techniques for microfluidic devices. Subsequently, a comprehensive analysis is conducted on microfluidic detection methods for endocrine-disrupting chemicals, pharmaceuticals and personal care products, microplastics, and perfluorinated compounds. Finally, the prospects and future challenges of microfluidic sensors in this field are discussed.

Self-powered molecularly imprinted photoelectrochemical sensor based on Ppy/QD/HOF heterojunction for the detection of bisphenol A

As an emerging porous material, hydrogen-bonded organic framework materials (HOFs) still pose application challenges. In this work, the designed type "I + II" heterojunction extracted hot electrons from HOFs using quantum dots (QDs) and polypyrrole (Ppy), improving the stability and photoelectrochemical performance of materials. In addition to serving as a potential well, electropolymerized Ppy was used as a recognition element for bisphenol A (BPA), and a novel self-powered molecularly imprinted photoelectrochemical (MIP-PEC) sensor was designed. The sensing platform showed a linear relationship from 1 × 10-10 to 1 × 10-7 mol∙L-1 and from 1 × 10-7 to 1 mol∙L-1 with an acceptable detection limit of 4.2 × 10-11 mol∙L-1. This is the first application of HOFs in constructing MIP-PEC sensors and a new attempt to improve the stability of HOFs for the application of porous crystal materials in the sensing field.

Recent advancements in bio-based dielectric and piezoelectric polymers and their biomedical applications

The advent of polymer-based dielectrics marked a significant breakthrough in dielectric materials. However, despite their many advantages, they pose serious environmental threats. Therefore, in recent years, there has been growing interest in bio-based polymers as a sustainable alternative to traditional petroleum-based polymers. Their renewable nature and reduced environmental impact can fulfil the rising demand for eco-friendly substitutes. Beyond their ecological benefits, bio-based polymers also possess distinctive electrical properties that make them extremely attractive in a variety of applications. Considering these, herein, we present recent advancements in bio-based dielectric polymers and nanocomposites. First, the fundamental concepts of dielectric and polymer-based dielectric materials are covered. Then, we will delve into the discussion of recent advancements in the dielectric properties and thermal stability of bio-based polymers, including polylactic acid, polyhydroxyalkanoates, polybutylene succinate, starch, cellulose, chitosan, chitins, and alginates, and their nanocomposites. Other novel bio-based dielectric polymers and their distinct dielectric characteristics have also been pointed out. In an additional section, the piezoelectric properties of these polymers and their recent biomedical applications have been highlighted and discussed thoroughly. In conclusion, this paper thoroughly discusses the recent advances in bio-based dielectric polymers and their potential to revolutionize the biomedical industry while cultivating a more sustainable and greener future.

Bisphenol A and its structural analogues exhibit differential potential to induce mitochondrial dysfunction and apoptosis in human granulosa cells

Bisphenol A (BPA) is an endocrine disruptor strongly associated with ovarian dysfunction. BPA is being substituted by structurally similar chemicals, such as bisphenol S (BPS), bisphenol F (BPF), and bisphenol AF (BPAF). However, the toxicity of these analogues in female reproduction remains largely unknown. This study evaluated the effects of BPA and its analogues BPS, BPF, and BPAF on the mitochondrial mass and function, oxidative stress, and their potential to induce apoptosis of human granulosa cells (KGN cells). BPA and its analogues, especially BPA and BPAF, significantly decreased mitochondrial activity and cell viability. The potential of bisphenols to reduce mitochondrial mass and function differed in the following order: BPAF > BPA > BPF > BPS. Flow cytometry revealed that exposure to bisphenols significantly increased mitochondrial ROS levels and increased mitochondrial Ca2+ levels. Thus, bisphenols exposure causes mitochondrial stress in KGN cells. At the same time, bisphenols exposure significantly induced apoptosis. These results thus emphasize the toxicity of these bisphenols to cells. Our study suggests the action mechanism of BPA and its analogues in damage caused to ovarian granulosa cells. Additionally, these novel analogues may be regrettable substitutes, and the biological effects and potential risks of BPA alternatives must be evaluated.

Dual-signal amplified electrochemical aptasensor based on Au/MrGO and DNA nanospheres for ultra-sensitive detection of BPA without directly modified working electrode

Rapid and sensitive analysis of bisphenol A (BPA) is essential for preventing health risks to humans and animals. Hence, a signal-amplified electrochemical aptasensor without repetitive polishing and modification of working electrode was developed for BPA using Au-decorated magnetic reduced graphene oxide (Au/MrGO)-based recognition probe (RP) and DNA nanospheres (DNS)-based signal probe (SP) cooperative signal amplification. The DNS served as a signal molecule carrier and signal amplifier, while Au/MrGO acted as a signal amplifier and excellent medium for magnetic adsorption and separation. Moreover, utilizing the excellent magnetic properties of Au/MrGO eliminates the need for repetitive polishing and multi-step direct modification of the working electrode while ensuring that all detection processes take place in solution and that used Au/MrGO can be easily recycled. The proposed aptasensor exhibited not only good stability and selectivity, but also excellent sensitivity with a limit of detection (LOD) of 8.13 fg/mL (S/N = 3). The aptasensor's practicality was proven by spiking recovery tests on actual water samples and comparing the results with those detected by HPLC. The excellent sensitivity and selectivity make this aptasensor an alternative and promising avenue for rapid detection of BPA in environmental monitoring.

Exposure characteristics and cumulative risk assessment of bisphenol A and its substitutes: the Taiwan environmental survey for toxicants 2013

Introduction

Ever since the use of bisphenol A (BPA) has been restricted, concerns have been raised regarding the use of its substitutes, such as bisphenol S (BPS) and bisphenol F (BPF). Meanwhile, the EU European Food Safety Authority (EFSA) issued the new tolerable daily intake (TDI) after the latest re-risk assessment for BPA, which enforced the need for cumulative risk assessment in the population. This study was conducted to identify BPA and its substitute's exposure characteristics of the general Taiwanese population and estimate the cumulative risk of bisphenol exposure.

Methods

Urine samples (N = 366 [adult, 271; minor, 95]) were collected from individuals who participated in the Taiwan Environmental Survey for Toxicants 2013. The samples were analyzed for BPA, BPS, and BPF through ultraperformance liquid chromatography-tandem mass spectrometry. Daily intake (DI) levels were calculated for each bisphenol. Hazard quotients (HQs) were calculated with the consideration of tolerable DI and a reference dose. Additionally, hazard index (HI; sum of HQs for each bisphenol) values were calculated.

Results

Our study found that the median level of BPA was significantly higher in adults (9.63 μg/g creatinine) than in minors (6.63 μg/g creatinine) (p < 0.001). The DI of BPS was higher in female (0.69 ng/kg/day) than in male (0.49 ng/kg/day); however, the DIs of BPF and BPS were higher in boys (1.15 and 0.26 ng/kg/day, respectively) than in girls (0.57 and 0.20 ng/kg/day, respectively). Most HI values exceeded 1 (99% of the participants) after EFSA re-establish the TDI of BPA.

Discussion

Our study revealed that the exposure profiles and risk of BPA and its substitute in Taiwanese varied by age and sex. Additionally, the exposure risk of BPA was deemed unacceptable in Taiwan according to new EFSA regulations, and food contamination could be the possible source of exposure. We suggest that the risk of exposure to BPA and its substitutes in most human biomonitoring studies should be reassessed based on new scientific evidence.

Pollutants, microbiota and immune system: frenemies within the gut

Pollution is a critical concern of modern society for its heterogeneous effects on human health, despite a widespread lack of awareness. Environmental pollutants promote several pathologies through different molecular mechanisms. Pollutants can affect the immune system and related pathways, perturbing its regulation and triggering pro-inflammatory responses. The exposure to several pollutants also leads to alterations in gut microbiota with a decreasing abundance of beneficial microbes, such as short-chain fatty acid-producing bacteria, and an overgrowth of pro-inflammatory species. The subsequent intestinal barrier dysfunction, together with oxidative stress and increased inflammatory responses, plays a role in the pathogenesis of gastrointestinal inflammatory diseases. Moreover, pollutants encourage the inflammation-dysplasia-carcinoma sequence through various mechanisms, such as oxidative stress, dysregulation of cellular signalling pathways, cell cycle impairment and genomic instability. In this narrative review, we will describe the interplay between pollutants, gut microbiota, and the immune system, focusing on their relationship with inflammatory bowel diseases and colorectal cancer. Understanding the biological mechanisms underlying the health-to-disease transition may allow the design of public health policies aimed at reducing the burden of disease related to pollutants.

Long-term Bisphenol S exposure induced gut microbiota dysbiosis, obesity, hepatic lipid accumulation, intestinal lesions and dyslipidemia in mice

Bisphenol S (BPS) is a commonly detected chemical raw material in water, which poses significant threats to both the ecological environment and human health. Despite being recognized as a typical endocrine disruptor and a substitute for Bisphenol A, the toxicological effects of BPS remain nonnegligible. In order to comprehensively understand the health impacts of BPS, a long-term (154 days) exposure experiment was conducted on mice, during which the physiological indicators of the liver, intestine, and blood were observed. The findings revealed that exposure to BPS resulted in dysbiosis of the gut microbiota, obesity, hepatic lipid accumulation, intestinal lesions, and dyslipidemia. Furthermore, there exists a significant correlation between gut microbiota and indicators of host health. Consequently, the identification of specific gut microbiota can be considered as potential biomarkers for the evaluation of risk associated with BPS. This study will effectively address the deficiency in toxicological data pertaining to BPS. The novel BPS data obtained from this research can serve as a valuable reference for professionals in the field.

Electrochemical Detection of Bisphenol A Based on Gold Nanoparticles/Multi-Walled Carbon Nanotubes: Applications on Glassy Carbon and Screen Printed Electrodes

Bisphenol A (BPA) has been classified as an endocrine-disrupting substance that may cause adverse effects on human health and the environment. The development of simple and sensitive electrochemical biosensors is crucial for the rapid and effective quantitative determination of BPA. This work presents a study on electrochemical sensors utilizing gold nanoparticle-modified multi-walled carbon nanotubes (CNT/AuNPs). Glassy carbon electrodes (GCEs) and screen-printed electrodes (SPEs) were conveniently modified and used for BPA detection. AuNPs were electrodeposited onto the CNT-modified electrodes using the galvanostatic method. The electrodes were properly modified and characterized by using Raman spectroscopy, cyclic voltammetry (CV), and electrochemical impedance analysis (EIS). The electrochemical response of the sensors was studied using differential pulse voltammetry (DPV) and constant potential amperometry (CPA) for modified GCE and SPE electrodes, respectively, and the main analytical parameters were studied and optimized. Problems encountered with the use of GCEs, such as sensor degradation and high limit of detection (LOD), were overcome by using modified SPEs and a flow injection device for the measurements. Under this approach, an LOD as low as 5 nM (S/N = 3) was achieved and presented a linear range up to 20 μM. Finally, our investigation addressed interference, reproducibility, and reusability aspects, successfully identifying BPA in both spiked and authentic samples, including commercial and tap waters. These findings underscore the practical applicability of our method for accurate BPA detection in real-world scenarios. Notably, the integration of SPEs and a flow injection device facilitated simplified automation, offering an exceptionally efficient and reliable solution for precise BPA detection in water analysis laboratories.

Enhanced photocatalytic degradation of Rhodamine B using gold nanoparticles decorated on BaTiO3 with surface plasmon resonance enhancement

This study focused on synthesizing and applying gold nanoparticle (Au NP) decorated barium titanate (BaTiO3) nanoparticles for photocatalytic purposes. BaTiO3 NPs were synthesized using a facile hydrothermal method. Various techniques were employed to characterize the structure and morphological characteristics of the prepared materials. The photocatalytic degradation of Rhodamine B over the Au NPs-modified BaTiO3 photocatalysts was studied. Trapping experiments were conducted using different scavengers to elucidate the degradation mechanism and the involvement of photogenerated species. The incorporation of an appropriate amount of Au NPs into the composites resulted in a significant improvement in photocatalytic activity, attributed to the combined effect of Schottky junction at the interface and the surface plasmon resonance of Au NPs.

Apilarnil ameliorates Bisphenol A-induced testicular toxicity in adult male rats via improving antioxidant potency and PCNA expression

Apilarnil, a bee-derived product originating from drone larvae, offers a range of advantageous properties for both humans and animals. It functions as an antioxidant, provides neuroprotection, boosts fertility, and has antiviral capabilities. Additionally, it is a provider of androgenic hormones. These beneficial functions are supported by its chemical composition, which comprises mineral salts, vitamins, carbs, lipids, hormones, and amino acids. The current study aimed to evaluate the ameliorative effect of apilarnil against Bisphenol A (BPA)-induced testicular toxicity in male adult rats. Forty-eight Wistar albino rats were randomly classified into six groups. The first, second, and third received olive oil, BPA at a dose of 50 mg/kg body weight (bwt), and apilarnil at a dose of 0.6 g/kg bwt, respectively. The fourth, fifth, and sixth groups received apilarnil with, before, or after BPA administration, respectively. Phytochemical analysis using included linear ion trap-ultra-performance liquid chromatography-tandem mass spectrometry (LTQ-UPLC-MS/MS) and global natural products social molecular networking (GNPS) revealed the presence of lysine, 10-hydroxy-(E)-2-dodecenoic acid, apigenin7-glucoside, testosterone, progesterone, and campesterol. BPA administration decreased serum level of follicle stimulating hormone (FSH), luteinizing hormone (LH), testosterone, glutathione (GSH) concentration, total sperm count, motility, and vitality. Additionally, BPA increased sperm abnormalities, malondialdehyde concentration (MDA), and decreased proliferating cell nuclear antigen (PCNA) expression. The treatment with apilarnil ameliorated BPA reproductive toxicity in rats which was indicated by increased serum testosterone levels, normalized serum levels of FSH and LH, and concentration of MDA and GSH activity. Moreover, apilarnil improved sperm count, motility, morphology, and PCNA expression. Apilarnil was found to enhance reproductive hormones, MDA levels, antioxidant activity, and PCNA expression.

Quantitative identification of the co-exposure effects of e-waste pollutants on human oxidative stress by explainable machine learning

Global electronic waste (e-waste) generation continues to grow. The various pollutants released during precarious e-waste disposal activities can contribute to human oxidative stress. This study encompassed 129 individuals residing near e-waste dismantling sites in China, with elevated urinary concentrations of e-waste-related pollutants including heavy metals, polycyclic aromatic hydrocarbons (PAHs), organophosphorus flame retardants (OPFRs), bisphenols (BPs), and phthalate esters (PAEs). Utilizing an explainable machine learning framework, the study quantified the co-exposure effects of these pollutants, finding that approximately 23% and 18% of the variance in oxidative DNA damage and lipid peroxidation, respectively, was attributable to these substances. Heavy metals emerged as the most critical factor in inducing oxidative stress, followed by PAHs and PAEs for oxidative DNA damage, and BPs, OPFRs, and PAEs for lipid peroxidation. The interactions between different pollutant classes were found to be weak, attributable to their disparate biological pathways. In contrast, the interactions among congeneric pollutants were strong, stemming from their shared pathways and resultant synergistic or additive effects on oxidative stress. An intelligent analysis system for e-waste pollutants was also developed, which enables more efficient processing of large-scale and dynamic datasets in evolving environments. This study offered an enticing peek into the intricacies of co-exposure effect of e-waste pollutants.

A novel pencil graphite electrode modified with an iron-based conductive metal-organic framework exhibited good ability in simultaneous sensing bisphenol A and bisphenol S

Bisphenol A (BPA) and its substitute bisphenol S (BPS) are desirable materials widely used in manufacturing plastic products but can pose carcinogenic risks to humans. A new conductive iron-based metal-organic framework (Fe-HHTP)-modified pencil graphite electrode (PGE) for electrochemically sensing BPA and BPS was prepared and fully characterized by SEM, TEM, FT-IR, XRD, and XPS. Results showed that the optimal conditions for preparing Fe-HHTP/PGE were a pH of 6.5, a Fe-HHTP concentration of 2 mg·mL-1, a deposition potential of 0 V, and a deposition time of 100 s. The Fe-HHTP/PGE prepared under such conditions harbored a significant electrocatalytic activity with a detection limit of 0.8 nM for BPA and 1.7 nM for BPS (S/N = 3). Correspondingly, the electrochemical response current was linearly correlated to BPA and BPS, ranging from 0.01 to 100 μM. Fe-HHTP/PGE also obtained satisfactory recoveries by 93.8-102.1% and 96.0-101.3% for detecting BPA and BPS in plastic food packaging samples. Our work has provided a novel electrochemical tool to simultaneously detect BPA and BPS in food packaging samples and environmental matrixes.

Bisphenol F affects neurodevelopmental gene expression, mushroom body development, and behavior in Drosophila melanogaster

Bisphenol F (BPF) is a potential neurotoxicant used as a replacement for bisphenol A (BPA) in polycarbonate plastics and epoxy resins. We investigated the neurodevelopmental impacts of BPF exposure using Drosophila melanogaster as a model. Our transcriptomic analysis indicated that developmental exposure to BPF caused the downregulation of neurodevelopmentally relevant genes, including those associated with synapse formation and neuronal projection. To investigate the functional outcome of BPF exposure, we evaluated neurodevelopmental impacts across two genetic strains of Drosophila- w1118 (control) and the Fragile X Syndrome (FXS) model-by examining both behavioral and neuronal phenotypes. We found that BPF exposure in w1118 Drosophila caused hypoactive larval locomotor activity, decreased time spent grooming by adults, reduced courtship activity, and increased the severity but not frequency of β-lobe midline crossing defects by axons in the mushroom body. In contrast, although BPF reduced peristaltic contractions in FXS larvae, it had no impact on other larval locomotor phenotypes, grooming activity, or courtship activity. Strikingly, BPF exposure reduced both the severity and frequency of β-lobe midline crossing defects in the mushroom body of FXS flies, a phenotype previously observed in FXS flies exposed to BPA. This data indicates that BPF can affect neurodevelopment and its impacts vary depending on genetic background. Further, BPF may elicit a gene-environment interaction with Drosophila fragile X messenger ribonucleoprotein 1 (dFmr1)-the ortholog of human FMR1, which causes fragile X syndrome and is the most common monogenetic cause of intellectual disability and autism spectrum disorder.

Discovering New Substrates of a UDP-Glycosyltransferase with a High-Throughput Method

UDP-glycosyltransferases (UGTs) form a large enzyme family that is found in a wide range of organisms. These enzymes are known for accepting a wide variety of substrates, and they derivatize xenobiotics and metabolites for detoxification. However, most UGT homologs have not been well characterized, and their potential for biomedical and environmental applications is underexplored. In this work, we have used a fluorescent assay for screening substrates of a plant UGT homolog by monitoring the formation of UDP. We optimized the assay such that it could be used for high-throughput screening of substrates of the Medicago truncatula UGT enzyme, UGT71G1, and our results show that 34 of the 159 screened compound samples are potential substrates. With an LC-MS/MS method, we confirmed that three of these candidates indeed were glycosylated by UGT71G1, which includes bisphenol A (BPA) and 7-Ethyl-10-hydroxycamptothecin (SN-38); derivatization of these toxic compounds can lead to new environmental and medical applications. This work suggests that UGT homologs may recognize a substrate profile that is much broader than previously anticipated. Additionally, it demonstrates that this screening method provides a new means to study UDP-glycosyltransferases, facilitating the use of these enzymes to tackle a wide range of problems.

Warming and pollution interact to alter energy transfer efficiency, performance and fitness across generations in zebrafish (Danio rerio)

Energy transfer efficiency across different trophic levels, from food to new biomass, can determine population dynamics and food-web function. Here we show that the energy needed to produce a unit of new biomass increases with warming and exposure to bisphenol A (BPA), an endocrine disrupting compound. These environmental effects are at least partially transmitted across generations via DNA methylation. We raised parental (F0) and their offspring (F1) zebrafish (Danio rerio) of two genotypes (DNA methyltransferase 3a knock-out [DNMT3a-/-] and wild type [DNMT3a+/+]) at different temperatures (24 and 30 °C), with and without BPA (0 and 10 μg l-1) to test whether the effects of BPA are i) temperature specific, ii) mediated by DNA methylation, and iii) transmitted across generations even if offspring are not exposed. All experimental factors interacted to influence growth in length and mass, and metabolic rates with the result that wild-type F0 and F1 fish experienced the greatest energetic cost of growth under warm conditions in the presence of BPA. However, this response was not observed in DNMT3a-/- fish, indicating that DNA methylation is at least partly responsible for mediating these effects. Under the same conditions (warm + BPA) wild-type parents had reduced swimming performance, and reduced fecundity, and offspring embryonic survival was reduced significantly; genotype affected these responses significantly. Our results indicate that the conditions that are becoming increasingly common globally - warming and endocrine disrupting compounds from plastic pollution and production - can have detrimental effects on energy transfer efficiency and thereby potentially on food-web structure. These effects can be transmitted across generations even if offspring are not exposed to the pollutant, and are likely to have ramifications for conservation and fisheries.

18β-Glycyrrhetinic acid exerts cardioprotective effects against BPA-induced cardiotoxicity through antiapoptotic and antioxidant mechanisms

Bisphenol A (BPA) is a synthetic environmental pollutant widely used in industry, as well as is an endocrine disrupting chemicals and has a toxic effects on heart tissue. The aim of this study is to reveal the cardioprotective effects of 18β-glycyrretinic acid (GA) against BPA-induced cardiotoxicity in rats. In this study, 40 male rats were used and five different groups (each group includes eight rats) were formed. The rats were applied BPA (250 mg/kg b.w.) alone or with GA (50 and 100 mg/kg b.w.) for 14 days. Rats were killed on Day 15 and heart tissues were taken for analysis. GA treatment decreased serum lactate dehydrogenase and creatine kinase MB levels, reducing BPA-induced heart damage. GA treatment showed ameliorative effects against lipid peroxidation and oxidative stress caused by BPA by increasing the antioxidant enzyme activities (glutathione peroxidase, superoxide dismutase, and catalase) and GSH level of the heart tissue and decreasing the MDA level. In addition, GA showed antiapoptotic effect by increasing Bcl-2, procaspase-3, and -9 protein expression levels and decreasing Bax, cytochrome c, and P53 protein levels in heart tissue. As a result, it was found that GA has cardioprotective effects on heart tissue by exhibiting antioxidant and antiapoptotic effects against heart damage caused by BPA, an environmental pollutant. Thus, it was supported that GA could be a potential cardioprotective agent.

Development of an On-Column Trace Enrichment Method for the Determination of Sub-μg/L Bisphenol A in Bottled Water by RP-HPLC with Fluorescent Detection

A simple extraction-free, on-column trace enrichment liquid chromatographic method for the determination of trace levels of bisphenol A (BPA) in bottled water samples has been developed. It was found possible to determine ng/L (ppt) levels of BPA by the direct introduction of 6 mL of sample water to the HPLC column utilising fluorescence detection (Exλ = 274 nm, Emλ = 314 nm). Following the loading of the sample and the chromatographic focusing of the BPA on the analytical column, a simple switch from the aqueous sample to the isocratic chromatographic elution step of 50% acetonitrile/deionised water was undertaken. Using a BPA concentration of 0.596 μg/L the effect of sample volume was investigated over the range 1.0 to 12 mL. A linear relationship with the sample volume introduced to the HPLC column and the resulting peak height for BPA was found over the entire range investigated (R2 = 0.999). Using a sample volume of 6.0 mL, a well-defined chromatographic peak was recorded for BPA over the concentration range of 0.1 μg/L to 6.25 μg/L (R2 = 0.9998). A limit of detection of 0.058 μg/L for BPA was calculated based on 3 δ. A mean recovery of 100% with an associated %CV of 7.6% (n = 5) was obtained for a bottled spring water sample fortified with 1.25 μg/L BPA. Samples can be processed in under 12 minutes, much faster than that commonly reported for conventional offline extraction and chromatographic-based methods. The results show that the optimised method holds promise for the determination of BPA in such samples.

Co-Immobilization of Laccase and Mediator into Fe-Doped ZIF-8 Significantly Enhances the Degradation of Organic Pollutants

Co-immobilization of laccase and mediator 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) for wastewater treatment could simultaneously achieve the reusability of laccase and avoid secondary pollution caused by the toxic ABTS. Herein, Fe-induced mineralization was proposed to co-immobilize laccase and ABTS into a metal-organic framework (ZIF-8) within 30 min. Immobilized laccase (Lac@ZIF-8-Fe) prepared at a 1:1 mass ratio of Fe2+ to Zn2+ exhibited enhanced catalytic efficiency (2.6 times), thermal stability, acid tolerance, and reusability compared to free laccase. ABTS was then co-immobilized to form Lac+ABTS@ZIF-8-Fe (ABTS = 261.7 mg/g). Lac@ZIF-8-Fe exhibited significantly enhanced bisphenol A (BPA) removal performance over free laccase due to the local substrate enrichment effect and improved enzyme stability. Moreover, the Lac+ABTS@ZIF-8-Fe exhibited higher BPA removal efficiency than the free laccase+ABTS system, implying the presence of a proximity effect in Lac+ABTS@ZIF-8-Fe. In the successive malachite green (MG) removal, the MG degradation efficiency by Lac@ZIF-8-Fe was maintained at 96.6% at the fifth reuse with only an extra addition of 0.09 mM ABTS in each cycle. As for Lac+ABTS@ZIF-8-Fe, 58.5% of MG was degraded at the fifth cycle without an extra addition of ABTS. Taken together, this research has provided a novel strategy for the design of a co-immobilized laccase and ABTS system for the degradation of organic pollutants.

Feeding frequency does not interact with BPA exposure to influence metabolism or behaviour in zebrafish (Danio rerio)

Resource limitation can constrain energy (ATP) production, and thereby affect locomotion and behaviour such as exploration of novel environments and boldness. Consequently, ecological processes such as dispersal and interactions within and between species may be influenced by food availability. Energy metabolism, and behaviour are regulated by endocrine signalling, and may therefore be impacted by endocrine disrupting compounds (EDCs) including bisphenol A (BPA) derived from plastic manufacture and pollution. It is important to determine the impacts of these novel environmental contexts to understand how human activity alters individual physiology and behaviour and thereby populations. Our aim was to determine whether BPA exposure interacts with feeding frequency to alter metabolism and behaviour. In a fully factorial experiment, we show that low feeding frequency reduced zebrafish (Danio rerio) mass, condition, resting metabolic rates, total distance moved and speed in a novel arena, as well as anxiety indicated by the number of times fish returned to a dark shelter. However, feeding frequency did not significantly affect maximal metabolic rates, aerobic scope, swimming performance, latency to leave a shelter, or metabolic enzyme activities (citrate synthase and lactate dehydrogenase). Natural or anthropogenic fluctuation in food resources can therefore impact energetics and movement of animals with repercussions for ecological processes such as dispersal. BPA exposure reduced LDH activity and body mass, but did not interact with feeding frequency. Hence, behaviour of adult fish is relatively insensitive to disruption by BPA. However, alteration of LDH activity by BPA could disrupt lactate metabolism and signalling and together with reduction in body mass could affect size-dependent reproductive output. BPA released by plastic manufacture and pollution can thereby impact conservation and management of natural resources.

An all-in-one portable colorimetric detection platform for sensitive detection of bisphenol A based on target-mediated CeO2@ZIF-8/Apt biocomposites

BPA aptamers functionalized cerium oxide nanoparticles encapsulated in zeolitic imidazolate framework-8 (CeO2@ZIF-8/Apt) were developed to fabricate an all-in-one portable platform for on-site quantitative detection of BPA. By combining biocomposites with a 3,3',5,5'-tetramethylbenzidine (TMB)-based sodium alginate (SA) hydrogel and smartphone-based RGB analysis, highly sensitive and convenient monitoring of BPA was achieved. CeO2@ZIF-8 composites were constructed using a novel surfactant-modified concentration-controlled synthesis strategy. After being functionalized with BPA aptamers, CeO2@ZIF-8/Apt biocomposites were used as target-response colorimetric probes for target recognition and signal transduction. The oxidase-like activity of CeO2@ZIF-8 was effectively sealed by BPA aptamers and controllably released in a concentration-dependent manner through aptamer-BPA reactions. Utilizing SA hydrogels containing TMB in the caps, a one-step sample addition and one-pot detection can be conveniently achieved and reliably quantified by smartphone-based RGB analysis in an instrument-free way. The detection range of this portable detection platform is 50 pg/mL to 500 ng/mL with limit of detection calculated as 34.88 pg/mL, comparable to that of conventional detection in the solution system (4.57 pg/mL). The recoveries in tap water, apple juice, and milk ranged from 91.02 % and 106.75 %. This work contributes new insights into the design of all-in-one detection platforms for contaminants monitoring in resource-constrained regions.

Transcriptomic Integration Analyses Uncover Common Bisphenol A Effects Across Species and Tissues Primarily Mediated by Disruption of JUN/FOS, EGFR, ER, PPARG, and P53 Pathways

Bisphenol A (BPA) is a common endocrine disruptor widely used in the production of electronic, sports, and medical equipment, as well as consumer products like milk bottles, dental sealants, and thermal paper. Despite its widespread use, current assessments of BPA exposure risks remain limited due to the lack of comprehensive cross-species comparative analyses. To address this gap, we conducted a study aimed at identifying genes and fundamental molecular processes consistently affected by BPA in various species and tissues, employing an effective data integration method and bioinformatic analyses. Our findings revealed that exposure to BPA led to significant changes in processes like lipid metabolism, proliferation, and apoptosis in the tissues/cells of mammals, fish, and nematodes. These processes were found to be commonly affected in adipose, liver, mammary, uterus, testes, and ovary tissues. Additionally, through an in-depth analysis of signaling pathways influenced by BPA in different species and tissues, we observed that the JUN/FOS, EGFR, ER, PPARG, and P53 pathways, along with their downstream key transcription factors and kinases, were all impacted by BPA. Our study provides compelling evidence that BPA indeed induces similar toxic effects across different species and tissues. Furthermore, our investigation sheds light on the underlying molecular mechanisms responsible for these toxic effects. By uncovering these mechanisms, we gain valuable insights into the potential health implications associated with BPA exposure, highlighting the importance of comprehensive assessments and awareness of this widespread endocrine disruptor.

Worldwide risk assessment of phthalates and bisphenol A in humans: The need for updating guidelines

Phthalates and bisphenol A (BPA) are compounds widely used as raw materials in the production of plastics, making them ubiquitous in our daily lives. This results in widespread human exposure and human health hazards. Although efforts have been conducted to evaluate the risk of these compounds in diverse regions around the world, data scattering may mask important trends that could be useful for updating current guidelines and regulations. This study offers a comprehensive global assessment of human exposure levels to these chemicals, considering dietary and nondietary ingestion, and evaluates the associated risk. Overall, the exposure daily intake (EDI) values of phthalates and BPA reported worldwide ranged from 1.11 × 10-7 to 3 700 µg kg bw-1 d-1 and from 3.00 × 10-5 to 6.56 µg kg bw-1 d-1, respectively. Nevertheless, the dose-additive effect of phthalates has been shown to increase the EDI up to 5 100 µg kg bw-1 d-1, representing a high risk in terms of noncarcinogenic (HQ) and carcinogenic (CR) effects. The worldwide HQ values of phthalates and BPA ranged from 2.25 × 10-7 to 3.66 and from 2.74 × 10-7 to 9.72 × 10-2, respectively. Meanwhile, a significant number of studies exhibit high CR values for benzyl butyl phthalate (BBP) and di(2-ethylhexyl) phthalate (DEHP). Moreover, DEHP has shown the highest maximum mean CR values for humans in numerous studies, up to 179-fold higher than BBP. Despite mounting evidence of the harmful effects of these chemicals at low-dose exposure on animals and humans, most regulations have not been updated. Thus, this article emphasizes the need for updating guidelines and public policies considering compelling evidence for the adverse effects of low-dose exposure, and it cautions against the use of alternative plasticizers as substitutes for phthalates and BPA because of the significant gaps in their safety.

Boron nitride quantum dots-enhanced laser desorption/ionization mass spectrometry analysis and imaging of bisphenol A

Bisphenol A (BPA) displays harmful effects on the human health, including potent endocrine activity and potential impact on the development of cancer. Analysis BPA residues in water and plastic products attracted considerable attention in the past decades. However, dominantly used conventional analysis techniques are unable to directly and non-destructively identify the correct species of BPA in plastic products. Hence, this study demonstrates the effective utilisation of boron nitride quantum dots (BNQDs) as an inorganic matrix in matrix-assisted laser desorption/ionization mass spectrometry analysis and imaging (MALDI-MS & MSI) for BPA. The presence of abundant hydroxyl and amino groups on the BNQDs' surface is favourable for the formation of hydrogen bonds with BPA, and increases their ionization and chemoselectivity. Intriguingly, the BNQDs matrix offers a distinct signal for phenolic hazardous molecules featuring different hydroxyl groups. The method was applied to detect BPA at nanomolar level in environmental water, and also allowed non-destructive and in situ mapping of BPA in plastics and pacifiers. This research provides a novel strategy for adapting nanomaterials as inorganic matrices for analysis of small molecular pollutants in environmentally relevant samples using MALDI-MS & MSI.

Effective immobilization of bisphenol A utilizing activated biochar incorporated into soil: combined with batch adsorption and fixed-bed column studies

This study presented the mixture of biochar and soil for removal of bisphenol A (BPA) to assess environmental remediation ability. Using phoenix tree leaves as biomass and phosphoric acid as activator, after one-step hydrothermal and short-term activation, the eventual solid product was phosphoric acid hydrothermal activated carbon (HPC). The characterizations showed that HPC had the high specific surface (994.21 m2·g-1), and large unsaturated esters and hydroxyl groups. The saturated adsorption capacities of batch and column adsorption for the addition of 0.5% HPC to soil were 0.790 mg·g-1 and 67.23 mg·kg-1, while to the natural soil were 0.236 mg·g-1 and 8.75 mg·kg-1, respectively. The adsorption kinetics and thermodynamic analysis indicated that the adsorption process utilizing HPC incorporated into soil was a chemical reaction rate-controlled, physical-dominated multilayer adsorption, and spontaneous endothermic. Also, batch adsorption experiments and analysis were performed under different pH levels, HPC contents, organic acid concentrations, and cationic strengths. Successively, fixed-bed column experiments were carried out with and without the HPC; the results showed that the wide mass transfer zone led to the effective fixation of BPA, and the organic acid had no obvious effect on the fixation of BPA when the 1.0% HPC mixed with soil. Finally, through characterizations and data analysis, the enhanced adsorption of BPA by HPC mixed with soil mainly relied on π-π interaction, hydrogen bonding, followed by electrostatic attraction and pore filling.

Palladium-Copper Bimetallic Aerogel as New Modifier for Highly Sensitive Determination of Bisphenol A in Real Samples

In this study, a bimetallic palladium-copper aerogel was synthesized and used for modification of a graphite paste electrode (Pd-Cu/GPE), allowing the sensitive determination of bisphenol A (BPA). Different techniques, such as SEM, TEM, XPS, and AFM, were used for characterization of the Pd-Cu aerogel. To elucidate the properties of the Pd-Cu/GPE, the electrochemistry methods such as differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy were used. DPV measurements were conducted in phosphate electrolyte and buffer solution (0.2 M PBS, pH 5) at a potential range from 0.4 to 0.9 V vs. Ag/AgCl. The DPVs peaks currents increased linearly with BPA concentrations in the 0.04-85 and 85-305 µM ranges, with a limit of detection of 20 nM. The modified electrode was successfully used in real samples to determine BPA, and the results were compared to the standard HPLC method. The results showed that the Pd-Cu/GPE had good selectivity, stability, and sensitivity for BPA determination.

Curcumin protects against bisphenol A-induced hepatic steatosis by inhibiting cholesterol absorption and synthesis in CD-1 mice

Curcumin is a polyphenol extracted from the rhizome of turmeric, and our previous research showed that curcumin inhibited cholesterol absorption and had cholesterol-lowering effect. Bisphenol A (BPA), a common plasticizer, is widely used in the manufacture of food packaging and is associated with non-alcoholic fatty liver disease (NAFLD). We hypothesized that curcumin could protect against BPA-induced hepatic steatosis by inhibiting cholesterol absorption and synthesis. Male CD-1 mice fed BPA-contaminated diet with or without curcumin for 24 weeks were used to test our hypothesis. We found that chronic low-dose BPA exposure significantly increased the levels of serum triglyceride (TG), total cholesterol (TC), and low-density lipoprotein cholesterol and the contents of liver TG and TC, resulting in liver fat accumulation and hepatic steatosis while curcumin supplementation could alleviate BPA-induced dyslipidemia and hepatic steatosis. Moreover, the anti-steatosis and cholesterol-lowering effects of curcumin against BPA coincided with a significant reduction in intestinal cholesterol absorption and liver cholesterol synthesis, which was modulated by suppressing the expression of sterol regulatory element-binding protein-2 (SREBP-2), Niemann-Pick C1-like 1 (NPC1L1), and 3-hydroxy-3-methylglutaryl coenzyme A reductase (HMGCR) in the small intestine and liver. In addition, the expression levels of liver lipogenic genes such as liver X receptor alpha (LXRα), SREBP-1c, acetyl-CoA carboxylase 1 (ACC1), and ACC2 were also markedly down-regulated by curcumin. Overall, our findings indicated that curcumin inhibited BPA-induced intestinal cholesterol absorption and liver cholesterol synthesis by suppressing SREBP-2, NPC1L1, and HMGCR expression, subsequently reducing liver cholesterol accumulation and fat synthesis, thereby preventing hepatic steatosis and NAFLD.

Adsorption and catalytic degradation of bisphenol A and p-chlorophenol by magnetic carbon nanotubes

Phenolic compounds are common industrial pollutants that seriously endangers water ecology and human health. Therefore, the development of efficient and recyclable adsorbents is of importance for wastewater treatment. In this research, HCNTs/Fe3O4 composites were constructed using co-precipitation way by loading magnetic Fe3O4 particles onto hydroxylated multi-walled carbon nanotubes (MWCNTs), showing excellent adsorption capacity for Bisphenol A (BPA) and p-chlorophenol (p-CP), and excellent catalytic ability of activating potassium persulphate (KPS) for degradation of BPA and p-CP. The adsorption capacity and catalytic degradation potential were evaluated for the removal of BPA and p-CP from solutions. The results showed that the adsorption took only 1 h to reach equilibrium and HCNTs/Fe3O4 had maximum adsorption capacities of 113 mg g-1 for BPA and 41.6 mg g-1 for p-CP at 303 K, respectively. The adsorption of BPA fitted well using the Langmuir, Temkin and Freundlich models while the adsorption of p-CP fitted well using the Freundlich and Temkin models. BPA adsorption on HCNTs/Fe3O4 was dominated by π-π stacking and hydrogen bonding forces. The adsorption included both the mono-molecular layer adsorption on the adsorbent surface and the multi-molecular layer adsorption on the non-uniform surface. The adsorption of p-CP on HCNTs/Fe3O4 was a multi-molecular layer adsorption on a dissimilar surface. The adsorption was controlled by forces such as π-π stacking, hydrogen bonding, partition effect and molecular sieve effect. Moreover, KPS was added to the adsorption system to initiate a heterogeneous Fenton-like catalytic degradation. Over a wide pH range (4-10), 90% of the aqueous BPA solution and 88% of the p-CP solution were degraded in 3 and 2 h, respectively. After three adsorption-regeneration or degradation cycles, the removal of BPA and p-CP remained up to 88% and 66%, indicating that HCNTs/Fe3O4 composite is cost-effective, stable and highly efficient to remove BPA and p-CP from solution.

A microgel of CdSe quantum dots for fluorescent bisphenol A detection

A fluorescent microgel for BPA detection has been successfully prepared by cross-linking linear poly(styrene-co-glycidyl methacrylate) (poly (STY-co-GMA)) with L-cysteine-capped CdSe quantum dots (Lcys-caped CdSe QDs). The microgel contained specific binding sites created by the covalent grafting of the copolymer onto the QDs via the GMA units, allowing for selective trapping of BPA molecules through π-π and hydrogen bond interactions with phenyl, carboxylic, and amine groups. After binding, electron transfer from the QDs to the analyte quenched the fluorescence at a wavelength of 547 nm when excited at 400 nm. The rational compositional and structural design allows the microgel to accurately detect BPA concentrations over a wide dynamic range of 1.0×10^-1 to 1.0×10⁵ μg/L with a low detection limit (7.0×10^-2 to 8.0×10^-2 μg/L) in deionized, drinking, and tap waters within just 2.0 min. On top of that, the sensitivity for BPA detection was 2.0-4.6 times higher than that of the other 3 structural analogues, even molecular imprinting was not involved. The influence of the STY/GMA compositions in the copolymers and environmental conditions, including pH and ionic strength, on the sensing performance was determined. Moreover, the sensing mechanism and the selectivity with respect to the molecular features were elucidated.

Machine learning-driven 3D plasmonic cellulose sensor for in situ rapid SERS detection of bisphenol compounds in water sample

Rapid component separation and accurate identification of bisphenols compounds (BPs) in real water sample remain an attractive challenge due to the trace amounts and structural similarities of BPs, and complexity of real samples. Here, we designed and synthesized chemically modified cellulose p-toluenesulfonate (CTSA) to encapsulate octadecylamine-modified gold nanoparticles (Au-ODA), obtaining 3D plasmonic cellulose (Au@CTSA). Simultaneously, by virtue of the high surface area in the 3D network of CTSA and the solvent volatile deposition, BPs in water were in situ extracted and concentrated in Au@CTSA microspheres. Since the 3D network of Au@CTSA supports the formation of "hotspots", the number of "hotspots" available is greatly improved, enabling excellent SERS detection of BPs. Based on the collected SERS spectra, machine learning was utilized to analyze the overall profile of BPs, which eliminated the subjective judgment of the concentration by the Au@CTSA sensor using a single characteristic peak. In this way, the accuracy of identification of BPs was significantly improved. The machine learning-driven Au@CTSA sensor realized the detection of traces bisphenol A (BPA), bisphenol S (BPS), and bisphenol F (BPF) in water sample, pushing quantitative detection of different concentrations of BPs and contributing facile indicators for water quality monitoring.

Photocatalytic degradation of bisphenol A in aqueous solution using TiO2/clinoptilolite hybrid photocatalyst

Photocatalytic degradation of bisphenol A (BPA) was investigated using commercial TiO2 P25 nanoparticles supported on natural zeolite clinoptilolite (Cli). Employing ultrasound assisted solid-state dispersion method hybrid photocatalyst containing 20 wt% of TiO2, marked TCli-20, was prepared. The structural, morphological and surface properties, and particle size distribution of TCli-20 were studied by X-ray powder diffraction, Fourier transform infrared spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, scanning electron microscopy with energy dispersive spectroscopy, atomic force microscopy, Brunner-Emmet-Teller method and laser diffraction. The results revealed a successful loading of TiO2 P25 nanoparticles on Cli surface and the preservation of both zeolitic structure and optical properties of TiO2. The influence of catalyst dose, pH value and the addition of hydrogen peroxide (H2O2) was evaluated. The optimal reaction conditions were 2 g/L of catalyst at near-neutral conditions (pH = 6.4) for complete BPA (5 mg/L) photodegradation after 180 min of exposure to simulated solar light. The addition of H2O2 was beneficial for the degradation process and led to the removal of BPA after 120 min of irradiation. BPA removal (60% for 180 min of irradiation) was reduced when TCli-20 was tested in bottled drinking water due to the presence of bicarbonate ions which acted as scavengers for hydroxyl radicals. Even though the photocatalytic activity of TCli-20 decreased after several cycles of usage, 70% of BPA was still successfully degraded during the fourth cycle. The reusability study showed easy separation, stability and good photocatalytic ability of investigated cost-effective hybrid photocatalyst.

Construction of Pt@BiFeO3 Xerogel-Supported O-g-C3N4 Heterojunction System for Enhanced Visible-Light Activity towards Photocatalytic Degradation of Rhodamine B

Synthetic organic pigments from the direct discharge of textile effluents are considered as colossal global concern and attract the attention of scholars. The efficient construction of heterojunction systems involving precious metal co-catalysis is an effective strategy for obtaining highly efficient photocatalytic materials. Herein, we report the construction of a Pt-doped BiFeO₃/O-g-C₃N₄ (Pt@BFO/O-CN) S-scheme heterojunction system for photocatalytic degradation of aqueous rhodamine B (RhB) under visible-light irradiation. The photocatalytic performances of Pt@BFO/O-CN and BFO/O-CN composites and pristine BiFeO₃ and O-g-C₃N₄ were compared, and the photocatalytic process of the Pt@BFO/O-CN system was optimized. The results exhibit that the S-scheme Pt@BFO/O-CN heterojunction has superior photocatalytic performance compared to its fellow catalysts, which is due to the asymmetric nature of the as-constructed heterojunction. The as-constructed Pt@BFO/O-CN heterojunction reveals high performance in photocatalytic degradation of RhB with a degradation efficiency of 100% achieved after 50 min of visible-light irradiation. The photodegradation fitted well with pseudo-first-order kinetics proceeding with a rate constant of 4.63 × 10^-2 min^-1. The radical trapping test reveals that h⁺ and ^•O₂^- take the leading role in the reaction, while the stability test reveals a 98% efficiency after the fourth cycle. As established from various interpretations, the considerably enhanced photocatalytic performance of the heterojunction system can be attributed to the promoted charge carrier separation and transfer of photoexcited carriers, as well as the strong photo-redox ability established. Hence, the S-scheme Pt@BFO/O-CN heterojunction is a good candidate in the treatment of industrial wastewater for the mineralization of organic micropollutants, which pose a grievous threat to the environment.

Physico-chemical and biological remediation techniques for the elimination of endocrine-disrupting hazardous chemicals

Due to their widespread occurrence and detrimental effects on human health and the environment, endocrine-disrupting hazardous chemicals (EDHCs) have become a significant concern. Therefore, numerous physicochemical and biological remediation techniques have been developed to eliminate EDHCs from various environmental matrices. This review paper aims to provide a comprehensive overview of the state-of-the-art remediation techniques for eliminating EDHCs. The physicochemical methods include adsorption, membrane filtration, photocatalysis, and advanced oxidation processes. The biological methods include biodegradation, phytoremediation, and microbial fuel cells. Each technique's effectiveness, advantages, limitations, and factors affecting their performance are discussed. The review also highlights recent developments and future perspectives in EDHCs remediation. This review provides valuable insights into selecting and optimizing remediation techniques for EDHCs in different environmental matrices.

Bisphenol A (BPA) Directly Activates the G Protein-Coupled Estrogen Receptor 1 and Triggers the Metabolic Disruption in the Gonadal Tissue of Apostichopus japonicus

The sea cucumber, Apostichopus japonicus, is a marine benthic organism that feeds on small benthic particulate matter and is easily affected by pollutants. Bisphenol A (BPA, 4,4'-isopropylidenediphenol) has been identified as an endocrine disruptor. It is ubiquitously detectable in oceans and affects a variety of marine animals. It functions as an estrogen analog and typically causes reproductive toxicity by interfering with the endocrine system. To comparatively analyze the reproductive effects of estradiol (E₂) and BPA on sea cucumbers, we identified a G protein-coupled estrogen receptor 1 (GPER1) in A. japonicus and investigated its effects on reproduction. The results showed that BPA and E₂ exposure activated A. japonicus AjGPER1, thereby mediating the mitogen-activated protein kinase signaling pathways. High-level expression of AjGPER1 in the ovarian tissue was confirmed by qPCR. Furthermore, metabolic changes were induced by 100 nM (22.83 μg/L) BPA exposure in the ovarian tissue, leading to a notable increase in the activities of trehalase and phosphofructokinase. Overall, our findings suggest that AjGPER1 is directly activated by BPA and affects sea cucumber reproduction by disrupting ovarian tissue metabolism, suggesting that marine pollutants pose a threat to the conservation of sea cucumber resources.

Interactions of human drug transporters with chemical additives present in plastics: Potential consequences for toxicokinetics and health

Human membrane drug transporters are recognized as major actors of pharmacokinetics; they also handle endogenous compounds, including hormones and metabolites. Chemical additives present in plastics interact with human drug transporters, which may have consequences for the toxicokinetics and toxicity of these widely-distributed environmental and/or dietary pollutants, to which humans are highly exposed. The present review summarizes key findings about this topic. In vitro assays have demonstrated that various plastic additives, including bisphenols, phthalates, brominated flame retardants, poly-alkyl phenols and per- and poly-fluoroalkyl substances, can inhibit the activities of solute carrier uptake transporters and/or ATP-binding cassette efflux pumps. Some are substrates for transporters or can regulate their expression. The relatively low human concentration of plastic additives from environmental or dietary exposure is a key parameter to consider to appreciate the in vivo relevance of plasticizer-transporter interactions and their consequences for human toxicokinetics and toxicity of plastic additives, although even low concentrations of pollutants (in the nM range) may have clinical effects. Existing data about interactions of plastic additives with drug transporters remain somewhat sparse and incomplete. A more systematic characterization of plasticizer-transporter relationships is needed. The potential effects of chemical additive mixtures towards transporter activities and the identification of transporter substrates among plasticizers, as well as their interactions with transporters of emerging relevance deserve particular attention. A better understanding of the human toxicokinetics of plastic additives may help to fully integrate the possible contribution of transporters to the absorption, distribution, metabolism and excretion of plastics-related chemicals, as well as to their deleterious effects towards human health.

Recent Advances in Sources, Migration, Public Health, and Surveillance of Bisphenol A and Its Structural Analogs in Canned Foods

The occurrence of bisphenol A (BPA) and its structural analogs, known as endocrine disruptors is widely reported. Consumers could be exposed to these chemicals through canned foods, leading to health risks. Considerable advances have occurred in the pathogenic mechanism, migration law, and analytical methodologies for these compounds in canned foods. However, the confusion and controversies on sources, migration, and health impacts have plagued researchers. This review aimed to provide insights and perspectives on sources, migration, effects on human health, and surveillance of these chemicals in canned food products. Current trends in the determination of BPA and its structural analogs have focused on mass spectroscopy and electrochemical sensor techniques. Several factors, including pH, time, temperature, and volume of the headspace in canned foods, could affect the migration of the chemicals. Moreover, it is necessary to quantify the proportion of them originating from the can material used in canned product manufacturing. In addition, adverse reaction research about exposure to low doses and combined exposure with other food contaminants will be required. We strongly believe that the information presented in this paper will assist in highlighting the research needs on these chemicals in canned foods for future risk evaluations.

Bisphenol P exposure in C57BL/6 mice caused gut microbiota dysbiosis and induced intestinal barrier disruption via LPS/TLR4/NF-κB signaling pathway

Despite being one of the most world's widely used and mass-produced compounds, bisphenol A (BPA) has a wide range of toxic effects. Bisphenol P (BPP), an alternative to BPA, has been detected in many foods. The effects of BPP dietary exposure on gut microbiota and the intestinal barrier were unclear. We designed three batches of animal experiments: The first studied mice were exposed to BPP (30 µg/kg BW/day) for nine weeks and found that they gained weight and developed dysbiosis of the gut microbiota. The second, using typical human exposure levels (L, 0.3 µg/kg BW/day BPP) and higher concentrations (M, 30 µg/kg BW/day BPP; H, 3000 µg/kg BW/day BPP), caused gut microbiota dysbiosis in mice, activated the Lipopolysaccharide (LPS) /TLR4/NF-κB signaling pathway, triggered an inflammatory response, increased intestinal permeability, and promoted bacterial translocation leading to intestinal barrier disruption. The third treatment used a combination of antibiotics and alleviated intestinal inflammation and injury. This study demonstrated the mechanism of injury and concentration effects of intestinal damage caused by BPP exposure, providing reference data for BPP use and control and yielding new insights for human disease prevention.

Can animals tune tissue mechanics in response to changing environments caused by anthropogenic impacts?

Anthropogenic climate change and pollution are impacting environments across the globe. This Review summarises the potential impact of such anthropogenic effects on animal tissue mechanics, given the consequences for animal locomotor performance and behaviour. More specifically, in light of current literature, this Review focuses on evaluating the acute and chronic effects of temperature on the mechanical function of muscle tissues. For ectotherms, maximal muscle performance typically occurs at temperatures approximating the natural environment of the species. However, species vary in their ability to acclimate to chronic changes in temperature, which is likely to have longer-term effects on species range. Some species undergo periods of dormancy to avoid extreme temperature or drought. Whilst the skeletal muscle of such species generally appears to be adapted to minimise muscle atrophy and maintain performance for emergence from dormancy, the increased occurrence of extreme climatic conditions may reduce the survival of individuals in such environments. This Review also considers the likely impact of anthropogenic pollutants, such as hormones and heavy metals, on animal tissue mechanics, noting the relative paucity of literature directly investigating this key area. Future work needs to determine the direct effects of anthropogenic environmental changes on animal tissues and related changes in locomotor performance and behaviour, including accounting for currently unknown interactions between environmental factors, e.g. temperature and pollutants.

Induction of reproductive injury by bisphenol A and the protective effects of cyanidin-3-O-glucoside and protocatechuic acid in rats

Bisphenol A (BPA) has attracted growing attention as a well-known environmental pollutant due to its high risk of male reproductive toxicity. In this study, transcriptomics profiling combined with metabolomic techniques was applied to explore the intervention effects of BPA-induced male reproductive toxicity. We demonstrated that cyanidin-3-O-glucoside (C3G) and its main metabolite protocatechuic acid (PCA) significantly increased testosterone and luteinizing hormone (LH) levels in the serum of rats, and improved sperm quality. Furthermore, we identified and screened differentially expressed genes (DEGs) and metabolites (DMs) that functionally enriched in the steroidogenesis-related pathways. Next, the validated results found that C3G and PCA significantly up-regulated the gene expressions of Star, Cyp11a1, Cyp17a1, Cyp19a1, Cyp7a1, Hsd3b1, Hsd3b2, Hsd17b3, Scrab1, and Ass1 in testicular. In Leydig cells, C3G and PCA dramatically alleviated apoptosis, ROS accumulation, and cell cycle arrest caused by BPA. In addition, molecular docking and simulation results implied that C3G and PCA competitively with BPA bind to the estrogen receptors α and β (ERα and ERβ) and shared common key amino acids. The main interaction modes between small molecules and estrogen receptors included π-π stacking, salt bridges, hydrogen bonds, and hydrophobic interactions. Therefore, our study sheds light on C3G and PCA supplementation can protect male reproduction from BPA-induced injury.

A universal design of turn-on fluorescent aptasensor based on luminescent MOFs: Application for the detection of bisphenol A in water, milk and chicken samples

A universal design of turn-on fluorescent aptasensor based on aptamer functionalized gold nanoparticles (AuNPs) and luminescent metal-organic frameworks (LMOFs) complex (AuNPs-Apt/NH₂-MIL-125(Ti)) was realized for bisphenol A (BPA) detection. LMOF NH₂-MIL-125(Ti) was prepared using facial hydrothermal method. BPA aptamer functionalized AuNPs were prepared and adsorbed on the surface of NH₂-MIL-125(Ti) to obtain platform of the fluorescent aptasensor. The fabrication process, sensing performance and applicability of the proposed aptasensor were characterized and investigated carefully. Linear detection range of the constructed aptasensor was from 1 × 10^-9 mol L^-1 to 1 × 10^-4 mol L^-1 with good selectivity, repeatability, stability and reproducibility under optimal experimental conditions. Meanwhile, the fluorescent aptasensor was successfully utilized for BPA detection in real samples with the recoveries of 95.80%-103.12%. The proposed aptasensor based on AuNPs-Apt/NH₂-MIL-125(Ti) holds significant potential for BPA detection in environmental and food samples, promoting the construction and application of LMOFs-based aptasensor.