Heterogeneous photo-Fenton degradation toward sulfonamide matrix over magnetic Fe3S4 derived from MIL-100(Fe)

MOF derivatization of multifunctional nanozyme: Peroxidase-like catalytic activity combined with magnetic solid phase extraction for colorimetric detection of Hg2

Nanozyme-based colorimetric sensing has drawn immense attention due to the rapid development of nanozyme in recent years. However, the selectivity of nanozyme-based colorimetric sensing greatly limits its subsequent practical application. It is well known that sample pretreatment can not only improve selectivity by eliminating the sample matrix interference, but also improve sensitivity by enriching trace targets. Based on the easy facile surface modification properties of nanozyme, we rationally designed nanozyme combined with sample pretreatment for colorimetric biosensing, through separation and enrichment, thereby improving the selectivity and sensitivity of the nanozyme colorimetric biosensing. As a proof of concept, the detection of Hg2+ by nanozyme-based colorimetric sensing was used as an example. Magnetic peroxidase-like nanozyme Fe3S4 was designed and synthesized. The selectivity is improved by the specific adsorption of S-Hg bond and the interference elimination after magnetic separation. In addition, the sensitivity is improved by magnetic solid-phase extraction enrichment. Our established colorimetric sensing based on Fe3S4 nanozyme integrated sample pretreatment with an enrichment factor of 100 and the limit of detection (LOD) is 26 nM. In addition, this strategy was successfully applied to detect Hg2+ in environmental water samples. Overall, the strategy showed good selectivity and sensitivity, providing a new practical method for the application of nanozyme-based biosensing in sample pretreatment.

Deep degradation of sulfamethoxazole by the Fe-Co/γ-Al2O3-catalysed photo-Fenton system

The heterogeneous photo-Fenton system using Fe-Co/γ-Al2O3 as a catalyst was applied in the study of sulfamethoxazole(SMX) degradation. The morphology, structure, elemental composition and metal valence distribution of Fe-Co/γ-Al2O3 were found to be relatively stable before and after the reaction. The highest SMX degradation efficiency and mineralization (The ratio of organic matter being oxidized to carbon dioxide and water) were obtained under the conditions of 15% Fe-Co loading rate, 1:1 mass ratio of Fe and Co, 1 g/L catalyst dosage, 1.5 mL 30% H2O2 dosage, 18 W UV lamp power and 60 min reaction time, which were 98% and 66%, respectively. Radical quenching experiments and electronic paramagnetic resonance (EPR) characterization revealed that ·OH played an important role in the degradation and mineralization SMX in the Fe-Co/γ-Al2O3 heterogeneous photo-Fenton system. Combined with the analysis of N, S and intermediate products, there may be three degradation pathways of SMX in the heterogeneous photo-Fenton system. This work provides a technical reference for realizing the efficient degradation and mineralization of SMX in a heterogeneous photo-Fenton reaction system.

Nanozyme-Catalyzed Colorimetric Detection of the Total Antioxidant Capacity in Body Fluids by Paper-Based Microfluidic Chips

Total antioxidants play a crucial role in human health, and detection of the total antioxidant capacity (TAC) has broad application prospects in fields such as food safety, environmental assessment, and disease diagnosis. However, a long detection time, cumbersome steps, high cost, reliance on professional equipment, and nonportability still remain significant challenges. In this work, an efficient strategy of point-of-care testing (POCT) of the TAC in body fluids by nanozyme-catalyzed colorimetric paper-based microfluidic sensors is proposed. The paper-based microfluidic sensors coupled with a smartphone can reduce testing costs and provide portability. The nanozyme prepared by the solvothermal method presents Michaelis constants of 0.11 and 0.129 mM for H2O2 and TMB, respectively. A method for immobilizing nanozymes and chromogenic agents on a paper-based microfluidic chip is established. Based on smartphone photography and image grayscale extraction, the TAC can be qualitatively detected with a detection limit and linear range of 33.4 and 50-700 μM, respectively. Furthermore, the proposed sensor can realize the one-step quantitative analysis of the TAC in body fluids (blood, saliva, and sweat) within 15 min. The proposed nanozyme-catalyzed colorimetric paper-based microfluidic sensors presented in this study exhibit promising application prospects in the fields of biochemical analysis and POCT.

Full-Spectrum Utilization of ZIF-67/Ag NPs/NaYF4:Yb,Er Photocatalysts for Efficient Degradation of Sulfadiazine: Upconversion Mechanism and DFT Calculation

In this work, novel ternary composite ZIF-67/Ag NPs/NaYF4:Yb,Er is synthesized by solvothermal method. The photocatalytic activity of the composite is evaluated by sulfadiazine (SDZ) degradation under simulated sunlight. High elimination efficiency of the composite is 95.4% in 180 min with good reusability and stability. The active species (h+, ·O2 - and ·OH) are identified. The attack sites and degradation process of SDZ are deeply investigated based on theoretical calculation and liquid chromatography-mass spectrometry analysis. The upconversion mechanism study shows that favorable photocatalytic effectiveness is attributed to the full utilization of sunlight through the energy transfer upconversion process and fluorescence resonance energy transfer. Additionally, the composite is endowed with outstanding light-absorbing qualities and effective photogenerated electron-hole pair separation thanks to the localized surface plasmon resonance effect of Ag nanoparticles. This work can motivate further design of novel photocatalysts with upconversion luminescence performance, which are applied to the removal of sulphonamide antibiotics in the environment.

Pyrite-assisted degradation of methoxychlor by laccase immobilized on Fe3S4/earthworm-like mesoporous SiO2

Laccase immobilized and cross-linked on Fe3S4/earthworm-like mesoporous SiO2 (Fe3S4/EW-mSiO2) was used to degrade methoxychlor (MXC) in aqueous environments. The effects of various parameters on the degradation of MXC were determined using free and immobilized laccase. Immobilization improved the thermal stability and reuse of laccase significantly. Under the conditions of pH 4.5, temperature 40 °C, and reaction time 8 h, the degradation rate of MXC by immobilized laccase reached a maximum value of 40.99% and remained at 1/3 of the original after six cycles. The excellent degradation performance of Fe3S4/EW-mSiO2 was attributable to the pyrite (FeS2) impurity in Fe3S4, which could act as an electron donor in reductive dehalogenation. Sulfide groups and Fe2+ reduced the activation energy of the system resulting in pyrite-assisted degradation of MXC. The degradation mechanism of MXC in aqueous environments by laccase immobilized on Fe3S4/EW-mSiO2 was determined via mass spectroscopy of the degradation products. This study is a new attempt to use pyrite to support immobilized laccase degradation.

LED-irradiated photo-Fenton process on pollutant removal: outcomes, trends, and limitations

This manuscript critically reviews the state of the art on the application of photo-Fenton processes irradiated by light-emitting diode arrays (LED) with a focus on the removal of contaminants of emerging concern (CEC) from aqueous matrices. LEDs are clean, low-cost radiation sources with longer lifespan compared to mercury lamps. This study covers the influence of LED sources, wavelengths, and dose upon CEC removal, and the potential for disinfection, abatement of antibiotic-resistant bacteria (ARB), and genes (ARG). The bibliographic search was performed in Scopus database using keyword combinations and resulted in a portfolio containing 52 relevant articles published between 2010-2023. According to reviewed papers, LED photoreactor design has evolved in the past decade aiming to improve CEC degradation in aqueous matrices while reducing construction and operation costs, and energy consumption. Among several reactors (annular, fluidized bed, parallel plate, wireless, pathway systems, and microreactor) surveyed for their performance and scalability, LED chips and strips are particularly suitable for application due to their wide emission angle (≈120°) and small size (mm2), which allow for, respectively, efficient illumination coverage and flexible arrangement and design. LED microreactors are very efficient in the degradation of contaminants and scalable with reduced area requirements. Although most studies were performed in synthetic solutions and at laboratory scale, the externally LED irradiated cylindrical reactor was successful for application in full-scale municipal water treatment plants. Future studies should focus on evaluating CEC removal in wastewater using scalable devices for continuous operation of solar photo-Fenton at night.

Optimizing the performance of Fe-based metal-organic frameworks in photo-Fenton processes: Mechanisms, strategies and prospects

Contaminants in water pose a significant challenge as they are harmful and difficult to treat using conventional methods. Therefore, various new methods have been proposed to degrade organic pollutants in water, among which the photo-Fenton process is considered promising. In recent years, Fe-based metal-organic frameworks (Fe-MOFs) have gained attention and found applications in different fields due to their cost-effectiveness, non-toxic nature, and unique porous structure. Many researchers have applied Fe-MOFs to the photo-Fenton process in recent years and achieved good results. This review focuses on describing different strategies for enhancing the performance of Fe-MOFs in the photo-Fenton process. Also, the mechanism of MOF in the photo-Fenton process is described in detail. Finally, prospects for the application of Fe-MOFs in photo-Fenton systems for the treatment of organic pollutants in water are presented. This study provides information and ideas for researchers to use Fe-MOFs to remove organic pollutants from water by photo-Fenton process.

Heterogeneous photo-Fenton degradation of acid orange 7 activated by red mud biochar under visible light irradiation

The heterogeneous photo-Fenton process is an effective technology for degrading organic contaminants in wastewater, and Fe-based catalysts are recently preferred due to their low biotoxicity and geological abundance. Herein, we synthesized a Fe-containing red mud biochar (RMBC) via one-step co-pyrolysis of red mud and shaddock peel as a photo-Fenton catalyst to activate H₂O₂ and degrade an azo dye (acid orange 7, AO7). RMBC showed excellent AO7 removal capability with a decolorization efficiency of nearly 100% and a mineralization efficiency of 87% in the heterogeneous photo-Fenton process with visible light irradiation, which were kept stable in five successive reuses. RMBC provided Fe²⁺ for H₂O₂ activation, and the light irradiation facilitated the redox cycle of Fe²⁺/Fe³⁺ in the system to produce more reactive oxygen species (ROS, i.e., •OH) for AO7 degradation. Further investigation revealed that •OH was the predominant ROS responsible for AO7 degradation in the light-free condition, while more ROS were produced in the system with light irradiation, and ¹O₂ was the primary ROS in the photo-Fenton process for AO7 removal, followed by •OH and O₂^•-. This study provides insight into the interfacial mechanisms of RMBC as a photo-Fenton catalyst for treating non-degradable organic contaminants in water through advanced oxidation processes under visible light irradiation.

Two-dimensional manganese-iron bimetallic MOF-74 for electro-Fenton degradation of sulfamethoxazole

This study reported a novel application of Mn_0.67Fe_0.33-MOF-74 with two-dimensional (2D) morphology grown on carbon felt as a cathode for efficiently removing antibiotic sulfamethoxazole in the heterogeneous electro-Fenton system. Characterization demonstrated the successful synthesis of bimetallic MOF-74 by a simple one-step method. Electrochemical detection showed that the second metal addition and morphological change improved the electrochemical activity of the electrode and contributed to pollutant degradation. At pH 3 and 30 mA of current, the degradation efficiency of SMX reached 96% with 12.09 mg L^-1 H₂O₂ and 0.21 mM ·OH detected in the system after 90 min. During the reaction, electron transfer between ≡Fe^II/III and ≡Mn^II/III promoted divalent metal ions regeneration, which ensured the continuation of the Fenton reaction. Two-dimensional structures exposed more active sites favoring ·OH production. The pathway of sulfamethoxazole degradation and the reaction mechanisms were proposed based on the intermediates identification by LC-MS and radical capture results. High degradation rates were still observed in tap and river water, revealing the potential of Mn_0.67Fe_0.33-MOF-74@CF for practical applications. This study provides a simple MOF-based cathode synthesis method, which enhances our understanding of constructing efficient electrocatalytic cathodes based on morphological design and multi-metal strategies.

Semirigid Highly Conjugated Zirconium-Organic Framework for the Capture of Micropollutants and Solar-Light Photodegradation

Micro-organic pollutants, particularly organic dyes and personal care products (PPCPs), are widely present in wastewater, and thus pose a serious risk to human health. The capture and solar-light photodegradation of micro-organic pollutants are highly challenging tasks, which require the design and synthesis of microporous materials with specific structures. As we know, organic dyes and PPCPs can be absorbed via π-π* stacking. In this paper, an iron-based metal-organic framework (Fe-UiO-68-terNap) containing semirigid conjugated aromatic ligands is prepared for the capture and solar-light photodegradation of multiple water contaminants. UiO-68-terNap was synthesized based on ternaphthalene with π-π* stacking, which would increase the adsorption capacities of organic micropollutants in wastewater. Additionally, the formation of Fe-O-Zr enhances the charge-separation ability resulting in the successful degradation of micropollutants in 240 min. The novel material has been elucidated by single-crystal X-ray diffraction and Fe K-edge XANES, which provide key insights at a molecular level for the design of novel materials for the capture and photodegradation of organic micropollutants.

A three-in-one hybrid nanozyme for sensitive colorimetric biosensing of pathogens

Pathogen screening is an important step in preventing foodborne diseases. In this study, a hybrid nanozyme, metal organic framework decorated with palladium (Pd) and platinum (Pt) (MIL-88@Pd/Pt), was innovatively synthesized and used with immune magnetic nanobeads (MNBs) for sensitive biosensing of Salmonella. First, immune MIL-88@Pd/Pt nanozymes and immune MNBs were mixed with target pathogens in a large-volume sample, resulting in effective isolation and specific label of target pathogens to form nanobead-Salmonella-nanozyme conjugates. Then, these conjugates were used to catalyze H₂O₂-TMB, and its color was changed from colorless to blue. Finally, catalysate absorption was measured to determine pathogen concentration. This colorimetric immunoassay could determine Salmonella typhimurium from 4 × 10¹ to 4 × 10⁵ CFU/mL in 60 min with a detection limit of 32 CFU/mL.

Enhanced photo-Fenton activity and stability for sulfamethoxazole degradation by FeS2@TiO2 heterojunction derived from MIL-125

FT-x composites with core-shell structure (FT = FeS₂@TiO₂, x represents the mass ratio of the used FeCl₃·6H₂O to MIL-125) were fabricated by a hydrothermal method using MIL-125(Ti) as a self-sacrificing template. Both the photo-Fenton activity and stability of the FT-1 were improved greatly in comparison with its counterparts due to the unique core-shell structure and synergistic effect between FeS₂ and TiO₂. Especially, the Fe leaching concentration of FT-1 was approximately 1/10 of the individual FeS₂, benefiting from the protection effect of TiO₂ shell. Under dark condition, the formed FeOOH occupied active sites and inhibited iron cycle as well as H₂O₂ decomposition, leading to the inactivation of FT-1. UV light irradiation not only boosted the catalytic activity but also prevented the FT-1 from reactivity decline owning to the regeneration of Fe²⁺ by photogenerated electrons and continuous generation of ·OH. Experimental and DFT calculation results indicated that a type-II heterojunction was formed, in which photogenerated electrons were transferred from FeS₂ core to TiO₂ shell, accelerating charge separation and further boosting sulfamethoxazole (SMX) degradation. FT-1 displayed outstanding photo-Fenton activity in wide pH ranged from 2 to 6 and good anti-interfering ability toward impurities in water matrix. Besides, the reusability of FT-1 was good, in which 90% SMX degradation was maintained even after 5 runs. Noteworthy, the photo-Fenton activity was recovered via a revulcanization process, in which FeOOH was completely transformed into FeS₂. This founding provided insights for the design and construction of heterojunction with both excellent photo-Fenton activity and stability.

Ultra-small Co3O4 particles embedded into N-doped carbon derived from ZIF-9 via half-pyrolysis for activating peroxymonosulfate to degrade sulfamethoxazole

The fabrication of novel and efficient transition metal-based catalysts for peroxymonosulfate (PMS) activation is of great significance for environmental remediation. Concerning energy consumption, the Co3O4@N-doped carbon (Co3O4@NC-350) was constructed via a half-pyrolysis strategy. The relatively low calcination temperature (350 °C) caused Co3O4@NC-350 to exhibit ultra-small Co3O4 nanoparticles, rich functional groups, uniform morphology, and a large surface area. For PMS activation, Co3O4@NC-350 could degrade 97% of sulfamethoxazole (SMX) in 5 min with a high k value of 0.73364 min-1, which was superior to the ZIF-9 precursor and other derived materials. Besides, Co3O4@NC-350 could be re-used over 5 times without obvious performance and structure change. The investigation of the influencing factors containing co-existing ions and organic matter demonstrated the Co3O4@NC-350/PMS system has satisfactory resistance. The quenching experiments and electron paramagnetic resonance (EPR) tests showed ˙OH, SO4˙-, ˙O2 - and 1O2 participated in the degradation process. Moreover, the structure and toxicity of intermediates during the SMX decomposing process have been evaluated. Overall, this research provides new prospects for exploring efficient and recycled MOF-based catalysts for PMS activation.

Efficient electron transfer and copper species transformation under the synergy of BiVO4 and novel Cu2(OH)3F nanosheets

Here, we report a simple and efficient strategy for evenly in situ growth of Cu₂(OH)₃F nanosheets on BiVO₄ spheres as a novel photo-Fenton-like catalyst using hydrothermal method. The Cu₂(OH)₃F/BiVO₄ composite catalysts showed great performance for the organic pollutants degradation under visible light irradiation due to the efficient electron transfer and copper species transformation. The synergetic between Cu₂(OH)₃F and BiVO₄ not only promoted the separation of electrons and holes but also enhanced the Cu²⁺ reduction, thus produced more strong oxidative radicals under a wide pH value range. The activity of Cu₂(OH)₃F/BiVO₄ composite for methylene blue degradation was 6.03 and 5.47 times more than that of pristine Cu₂(OH)₃F and BiVO₄, respectively. The composite catalysts were characterized with various methods and their stability and adaptability were also evaluated. Finally, a possible photo-Fenton-like reaction mechanism was also proposed based on the band structure/position and reaction species.

High-efficient peroxymonosulfate activation for rapid atrazine degradation by FeSx@MoS2 derived from MIL-88A(Fe)

FeS_x@MoS₂-x (FM-x, x implied real Mo/Fe content ratios) in which FeS_x derived from MIL-88A deposited on the surface of MoS₂ with a tight heterogeneous interface were synthesized for peroxymonosulfate (PMS) activation to degrade atrazine (ATZ). The catalytic performance of FM-0.96 was greatly improved due to the rapid regeneration of Fe²⁺ resulting from the interfacial interaction. FM-0.96 could completely degrade 10.0 mg/L ATZ within 1.0 min, and the toxicities for most of its intermediates were greatly reduced. The k value of FM-0.96 was 320 and 40 times higher than that of the MoS₂ and FeS_x, respectively. The SO₄·^-, ·OH and ¹O₂ were mainly responsible for ATZ degradation in FM-0.96/PMS system, and the conversion pathway of ¹O₂ was analyzed. Furthermore, the long-term continuous operation for ATZ degradation was achieved using a fixed membrane reactor. This work provides deep insights into metal sulfide composites derived from metal-organic frameworks for removing pollutants by activating PMS.

Enhanced photocatalytic degradation of malachite green dye by highly stable visible-light-responsive Fe-based tri-composite photocatalysts

A novel visible-light-sensitive ZnVFeO₄ photocatalyst has been fabricated by the precipitation method at different pH values for the enhanced photocatalytic degradation of malachite green (MG) dye as a representative pollutant under visible light irradiation at neutral pH conditions. The structure and optical characteristics of the prepared photocatalysts were investigated by XRD, FTIR, N2 adsorption-desorption, TEM, diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) analyses. In addition, the photocatalytic activity of ZnVFeO₄ photocatalysts superior the efficiency to be more than that of the mono and bi-metal oxides of iron and iron zinc oxides, respectively. The best sample, ZnVFeO₄ at pH 3, significantly enhances the degradation rate under visible light to be 12.7 × 10^-3 min^-1 and can retain a stable photodegradation efficiency of 90.1% after five cycles. The effect of the catalyst dose and the initial dye concentration on the photodegradation process were studied. This promising behavior under visible light may be attributed to the low bandgap and the decreased electron-hole recombination rate of the ZnVFeO₄ heterostructures. The scavenger experiment confirmed that the hydroxyl radicals induced the MG photodegradation process effectively. Hence, the ZnVFeO₄ is a reliable visible-light-responsive heterostructure photocatalyst with excellent potential for the photodegradation of organic pollutants in wastewater treatment.

Potential toxic effects of sulfonamides antibiotics: Molecular modeling, multiple-spectroscopy techniques and density functional theory calculations

Sulfonamide antibiotics (SAs) are widely used in medicine, animal husbandry and aquaculture, and excessive intake of SAs may pose potential toxicity to organisms. The toxicological mechanisms of two classical SAs, sulfamerazine (SMR) and sulfamethoxazole (SMT), were investigated by molecular docking, DFT and multi-spectroscopic techniques using HSA and BSA as model proteins. The quenching of HSA/BSA endogenous fluorescence by SMR was higher than that by SMT due to the stronger binding effect of the pyrimidine ring on HSA/BSA compared to the oxazole ring, and that result was consistent with that predicted by DFT calculations. Thermodynamic parameters show that the binding of SAs to HSA/BSA is an exothermic process that proceeds spontaneously (ΔG < 0). Marker competition experiments illustrate that the binding site of SMR/SMT on serum albumin is located in subdomain IIIA. The combination of SAs and HSA/BSA is mainly realized by hydrogen bond and hydrophobic interaction, and the concept is also supported by molecular modeling. The reduced α-helix content of HSA/BSA induced by SMR/SMT indicates a greater stretching of the protein α-helix structure of the SMR/SMT-HSA/BSA. The results could provide useful toxicological information on the hazards of SAs in response to growing concern that SAs may pose a toxic threat to organisms.

The state of the art review on photocatalytic Cr(VI) reduction over MOFs-based photocatalysts: From batch experiment to continuous operation

This state of the art review presented the photocatalytic reduction from highly toxic Cr(VI) to lowly toxic Cr(III) with metal-organic frameworks (MOFs) and their composites. The construction of composites facilitated the transportation of the photo-induced charges to enhance the Cr(VI) reduction, in which the corresponding mechanisms were clarified by both experimental tests and DFT calculations. The immobilized MOFs onto some substrates accomplished continuous operations toward Cr(VI) reduction even under real solar light. As well, the environmental applications of the Cr(VI) reduction were analyzed, in which the influence factors toward the Cr(VI) reduction were clarified. This review reported that a big breakthrough was achieved from the batch experiment to the continuous operation for Cr(VI) reduction, in which MOFs demonstrated a bright prospective in the field of photocatalytic Cr(VI) reduction.

Reconstruction of Electronic Structure of MOF-525 via Metalloporphyrin for Enhanced Photoelectro-Fenton Process

Photoelectro-Fenton (PEF) process can continuously promote the occurrence of Fenton reaction and the generation of active species, which is an advanced oxidation technology for pollutant degradation. However, the lack of bifunctional catalysts restricts the development of PEF technology. In this study, the electronic rearrangement MOF-525 modified by metalloporphyrin (named MOF-525-Fe/Zr) was prepared, to load on the carbon felt as a novel cathode catalyst, which is used in PEF process. A series of characterization and photoelectric chemical properties tests combined with DFT calculation showed that the modification of MOF-525 could not only have the large specific surface area and multistage pore structure but also co-stimulate the metal-to-ligand charge transfer (MLCT) and ligand-to-cluster charge transfer (LCCT) by photoelectric synergy. These charge transitions provide periodic electron donor-acceptor conduction paths in MOF-525-Fe/Zr, which can improve the active species formation and transfer efficiency. Owing to their favorable pore and electronic structure as well as stability, MOF-525-Fe/Zr shows great promise for the application in the catalytic process of PEF. Sulfamethoxazole (SMX) degradation was enhanced by MOF-525-Fe/Zr with the TOC removal rate above 75% both in river water and tap water. Finally, the reasonable pathway of PEF catalytic degradation of SMX was proposed by HPLC-MS analysis. In conclusion, this study provides a new idea for reconstructing the electronic structure of MOFs catalyst and broadening the practical application of PEF technology.

Layer-by-layer coating of MIL-100(Fe) on a cotton fabric for purification of water-soluble dyes by the combined effect of adsorption and photocatalytic degradation

Efforts have been made for sustainable development of adsorbents to purify organic contaminants from wastewater. In this study, a MIL-100(Fe) based textile that acts as a reusable adsorbent and photocatalytic agent was developed by synthesizing MIL-100(Fe) onto a cotton fabric by the layer-by-layer (LBL) process using water-based solutions. As the number of LBL cycles increased, the add-on's of MIL-100(Fe) showed a drastic increase up to 8 cycles, then showed gradual increases with further treatments. The overall adsorption performance was enhanced with the increased MIL-100(Fe) add-on's, but the specific adsorption efficiency per unit mass of MIL-100(Fe) was reduced as the LBL cycles increased, implying the reduced average adsorption efficiency with a thicker coating. To examine the reusability of the adsorbent, desorption efficiency of RhB was measured. The desorption after the first-time adsorption was not efficient due to the strong binding inside the pores. For the later cycles of adsorption–desorption, desorption occurred more efficiently, probably because RhB molecules were adhered mostly at the outer surface of the MOF layer. Simultaneously, MIL-100(Fe)@cotton demonstrated the photocatalytic degradation performance against RhB in the presence of H₂O₂ by the Fenton reaction. With the combined effect of adsorption and photodegradation, the developed fabric attained 96% removal efficiency for RhB dissolved in water. This study demonstrates an environmentally responsible process of developing a MIL-100(Fe) coated fabric that is readily available for effective removal of organic foulants in water. This fabrication method can be applied as a scalable manufacturing of metal–organic framework-based photocatalytic adsorbent textiles.

A MIL-100(Fe)-based water purifying textile that functions by dual action of adsorption and photocatalytic activity is designed via a layer-by-layer process without using toxic organic solvents.

Recent progress in Fenton/Fenton-like reactions for the removal of antibiotics in aqueous environments

The frequent use of antibiotics allows them to enter aqueous environments via wastewater, and many types of antibiotics accumulate in the environment due to difficult degradation, causing a threat to environmental health. It is crucial to adopt effective technical means to remove antibiotics in aqueous environments. The Fenton reaction, as an effective organic pollution treatment technology, is particularly suitable for the treatment of antibiotics, and at present, it is one of the most promising advanced oxidation technologies. Specifically, rapid Fenton oxidation, which features high removal efficiency, thorough reactions, negligible secondary pollution, etc., has led to many studies on using the Fenton reaction to degrade antibiotics. This paper summarizes recent progress on the removal of antibiotics in aqueous environments by Fenton and Fenton-like reactions. First, the applications of various Fenton and Fenton-like oxidation technologies to the removal of antibiotics are summarized; then, the advantages and disadvantages of these technologies are further summarized. Compared with Fenton oxidation, Fenton-like oxidations exhibit milder reaction conditions, wider application ranges, great reduction in economic costs, and great improved cycle times, in addition to simple and easy recycling of the catalyst. Finally, based on the above analysis, we discuss the potential for the removal of antibiotics under different application scenarios. This review will enable the selection of a suitable Fenton system to treat antibiotics according to practical conditions and will also aid the development of more advanced Fenton technologies for removing antibiotics and other organic pollutants.

Degradation of norfloxacin by MOF-derived lamellar carbon nanocomposites based on microwave-driven Fenton reaction: Improved Fe(III)/Fe(II) cycle

In this paper, a new type of iron-based magnetic nanoparticle material embedding mesoporous carbon (Fe@C₇₀₀) was prepared by simple pyrolysis of a MIL-101-Fe precursor and employed in the microwave-catalyzed degradation of norfloxacin (NOR) with the presence of H₂O₂. Characterization results showed successful anchoring of Fe⁰ nanoparticles in the carbon matrix. Under optimal treatment conditions (Calcination temperature = 700 °C, H₂O₂ dosage = 40 mM, MW power = 500 W, NOR dosage = 50 mg L^-1 and initial pH = 4), the degradation efficiency of NOR reached 95.22%. The catalyst showed exceptional degradation properties over a relatively wide pH range. The mesoporous carbon in the catalyst promoted electron transfer, enhanced the Fe(III)/Fe(II) cycle, increased contact between Fe⁰ and Fe²⁺ with H₂O₂, and accelerated the production of ·OH. Furthermore, density functional theory (DFT) calculations were used to predict the fragile active sites in NOR and to analyze the degradation pathway of NOR in combination with intermediates. Fe@C₇₀₀ retained good activity after 5 cycles. Reduced toxicity of intermediates predicted by T.E.S.T. compared to NOR. This study presented a new avenue for the rational design of Fe⁰-carbon composites as microwave-assisted Fenton-like catalysts for potential applications in wastewater treatment.

Facile Synthesis of MOFs-Templated Carbon Aerogels with Enhanced Tetracycline Adsorption Performance

Three-dimensional aerogels have great potential for antibiotic removal from aqueous solution due to their excellent solution mass transfer channels and special morphology. Herein, the metal ions were bound with alginate to form alginate-Fe, alginate-Cu, and alginate-Fe-Cu hydrogels, then they were used as nucleation sites for metal organic framework (MOF) growth to obtain MAlgs gels, respectively. Considering the aqueous environmental stability of MOFs particles, the alginate and MOF particles in MAlgs aerogels were pyrolyzed as templates to obtain the derived carbon aerogel CMAlgs. The results showed that the adsorption capacity of MAlgs-Fe-Cu aerogel was higher than that of MAlg-Cu and MAlg-Fe aerogels, up to ~130 mg·g−1. The adsorption performance of carbon aerogel CMAlg-Cu decreased obviously because of the decrease of pore size and oxygen-containing functional groups. The adsorption process is a combination of physical adsorption and chemical adsorption. In addition, CMAlgs aerogels exhibit better recyclability than MAlgs aerogels. This work provides a new strategy for fabricating MOFs-templated in-situ grown carbon aerogels for water purification.

Bi/mZVI Combined with Citric Acid and Sodium Citrate to Mineralize Multiple Sulfa Antibiotics: Performance and Mechanism

The oxidative mineralization of sulfanilamide drugs (SAs) using micro-size zero-valent iron (mZVI) cooperated with a citric acid buffer solution was evaluated. In this study SM2, SMX, and SD could be removed at 66%, 89%, and 83%, respectively, in a 0.5% Bi/mZVI+CA+NaCA system within 2 h. Based on our analysis, the produced ·OH could be ascribed from the complexation between citrate iron (Fe(II)[Cit]⁻) and the generated H₂O₂ resulting from the activation of O₂ on the mZVI surface in the Bi/mZVI+CA+NaCA system, further inducing the mineralization of antibiotics. The related possible degradation pathways were proposed. Two similar degradation pathways of SM2, SMX, and SD in the mixed liquid, including hydroxylation and SO₂ extrusion, were solved. Meanwhile, there was an additional proposed degradation pathway for SMX to be degraded more effectively, as reflected in the opening of the N-O bond on the benzene ring. Therefore, this work provides an experimental basis and theoretical support for the efficient treatment of antibiotic wastewater in real industry by using an iron-based method.