Photocatalytic degradation effect and mechanism of Karenia mikimotoi by non-noble metal modified TiO2 loading onto copper metal organic framework (SNP-TiO2@Cu-MOF) under visible light

Metal-Organic Frameworks for Sustainable Crop Disease Management: Current Applications, Mechanistic Insights, and Future Challenges

Efficient management of crop diseases and yield enhancement are essential for addressing the increasing food demands due to global population growth. Metal-organic frameworks (MOFs), which have rapidly evolved throughout the 21st century, are notable for their vast surface area, porosity, and adaptability, establishing them as highly effective vehicles for controlled drug delivery. This review methodically categorizes common MOFs employed in crop disease management and details their effectiveness against various pathogens. Additionally, by critically evaluating existing research, it outlines strategic approaches for the design of drug-delivery MOFs and explains the mechanisms through which MOFs enhance disease resistance. Finally, this paper identifies the current challenges in MOF research for crop disease management and suggests directions for future research. Through this in-depth review, the paper seeks to enrich the understanding of MOFs applications in crop disease management and offers valuable insights for researchers and practitioners.

Hierarchical porous MOF-199 mediated cellulosic paper for selective CO2 capture

MOF-199 is considered to be an excellent CO2 adsorbent owing to its substantial specific surface area, suitable pore structure and abundant sorption sites. However, powdered MOF-199 is prone to agglomeration and has poor recyclability. Herein, we proposed a MOF-199-based adsorbent by combining the MOF synthesis process with traditional papermaking process. Through such a design, MOF-199 particles are adhered on the surface of wood pulp fiber. The sufficient hydroxyl groups and electrostatic forces of cellulose facilitates the homogeneous and tight adhesion of MOF crystals. The optimal MP-4 sample demonstrated a high CO2 adsorption capacity (1.80 mmol·g--1 at 25 °C) and good CO2/N2 selectivity (30.06). Moreover, the composite sorbent can be easily regenerated. The adsorption mechanism was analyzed by the density functional theory approach. The simulation results showed that the carboxyl functional groups with a large number of oxygen atoms and active metal sites are the key to boost the CO2 adsorption performance.

Insights into copper(I) phenylacetylide with in-situ transformation of oxygen and enhanced visible-light response for water decontamination: Cu-O bond promotes exciton dissociation and charge transfer

The widespread contamination of hexavalent chromium (Cr(VI)), pharmaceuticals and personal care products (PPCPs), and dyes is a growing concern. necessitating the development of convenient and effective technologies for their removal. Copper(I) phenylacetylide (PhC2Cu) has emerged as a promising photocatalyst for environmental remediation. In this study, we introduced a functional Cu-O bond into PhC2Cu (referred to as OrPhC2Cu) by creatively converting the adsorbed oxygen on the surface of PhC2Cu into a Cu-O bond to enhance the efficiency of Cr(VI) photoreduction, PPCPs photodegradation, and dyes photodegradation through a facile vacuum activating method. The incorporation of the Cu-O bond optimized the electron structure of OrPhC2Cu, facilitating exciton dissociation and charge transfer. The exciton dissociation behavior and charge transfer mechanism were systematically investigated for the first time in the OrPhC2Cu system by photoelectrochemical tests, fluorescence and phosphorescence (PH) techniques, and density functional theory (DFT) calculations. Remarkably, the enhanced visible-light response of OrPhC2Cu improved photon utilization and significantly promoted the generation of reactive species (RSs), leading to the highly efficient Cr(VI) photoreduction (98.52% within 25 min) and sulfamethazine photodegradation (94.65% within 60 min), with 3.91 and 5.23 times higher activity compared to PhC2Cu. Additionally, the photocatalytic efficiency of OrPhC2Cu in degrading anionic dyes surpassed that of cationic dyes. The performance of the OrPhC2Cu system in treating electroplating effluent or natural water bodies suggests its potential for practical applications.

The Ciliate Euplotes balteatus Exhibits Removal Capacity upon the Dinoflagellates Karenia mikimotoi and Prorocentrum shikokuense

The significant threat posed by the ichthyotoxic dinoflagellate Karenia mikimotoi to coastal aquaculture, resulting in substantial economic losses, underscores the need for control and mitigation strategies. Bio-mitigation of algal blooms through grazers presents advantages in sustainability compared to methods relying on chemical or physical procedures. This study explored the inhibitory effect of nine Euplotes spp. (Alveolata, Ciliophora) isolates on simulated blooms, with E. balteatus W413 displaying removal capacity for K. mikimotoi and robust growth in co-cultivation. The unique size plasticity in W413 revealed an efficient predation strategy, as an increase in cellular size enables it to shift prey from bacteria to algal cells. The enlarged cell volume facilitates W413 to accommodate more algal cells, bestowing it with a high ingestion rate and removal capacity upon K. mikimotoi. Furthermore, W413 exhibited considerable inhibition towards co-occurring bloom species, specifically Prorocentrum shikokuense and Karenia spp., implying its potential to mitigate mixed-species blooms. The study enhances our understanding of the prey selectivity of Euplotes species and proposes E. balteatus as a potential bio-mitigation candidate for K. mikimotoi blooms, emphasizing the significance of micro-grazers in marine ecosystems.

Construction of Ternary Ce Metal-Organic Framework/Bi/BiOCl Heterojunction towards Optimized Photocatalytic Performance

Photocatalysis is the most promising green approach to solve antibiotic pollution in water, but the actual treatment effect is limited by photocatalytic activity. Herein, Bi and BiOCl were loaded onto the surface of Ce-MOF (metal-organic framework) using an electrostatic adsorption method, and a special ternary heterojunction of Ce/Bi/BiOCl was successfully prepared as a photocatalyst for the degradation of tetracycline (TC). FTIR demonstrated that the obtained photocatalyst contains functional groups such as -COOH belonging to Ce-MOF and characteristic crystal planes of Bi and BiOCl, indicating the successful construction of a ternary photocatalyst. The results of UV-vis absorption spectra confirm that the band gap of Ce/Bi/BiOCl heterojunction is reduced from 3.35 eV to 2.7 eV, resulting in an enhanced light absorption capability in the visible light region. The special ternary heterojunction constructed by Ce-MOF, Bi, and BiOCl could achieve a narrow band gap and reasonable band structure, thereby enhancing the separation of photogenerated charges. Consequently, the photocatalytic performance of the Ce/Bi/BiOCl ternary heterojunction was significantly enhanced compared to Ce-MOF, Bi, and BiOCl. Therefore, Ce/Bi/BiOCl can achieve a photocatalytic degradation rate of 97.7% within 20 min, which is much better than Bi (14.8%) and BiOCl (67.9%). This work successfully constructed MOF-based ternary photocatalysts and revealed the relationship between ternary heterojunctions and photocatalytic activity. This provides inspiration for constructing other heterogeneous catalysts for use in the field of photocatalysis.

Simultaneous inactivation of Microcystis aeruginosa and degradation of microcystin-LR in water by activation of periodate with sunlight

Harmful algal blooms pose tremendous threats to ecological safety and human health. In this study, simulated solar light (SSL) irradiation was used to activate periodate (PI) for the inactivation of Microcystis aeruginosa and degradation of microcystin-LR (MC-LR). We found that PI-SSL system could effectively inactivate 5 × 106 cells·mL-1 algal cells below the limit of detection within 180 min. ·OH and iodine (IO3· and IO4·) radicals generated in PI-SSL system could rupture cell membranes, releasing intracellular substances including MC-LR into the reaction system. However, the released MC-LR could be degraded into non-toxic small molecules via hydroxylation and ring cleavage processes in PI-SSL system, reducing their environmental risks. High algae inactivation performance of PI-SSL system in solution with a wide pH range (3-9), with the coexisting anions (Cl-, NO3- and SO42-) and the copresence of natural organic matters (humic acid and fulvic acid), real water (lake water and river water), as well as in continuous-flow reactor (14 h) were also achieved. In addition, under natural sunlight irradiation, effective algae inactivation could also be achieved in an enlarged reactor (1 L). Overall, our study showed that PI-SSL system could avoid the inference by the background substances and could be employed as a feasible technique to treat algal bloom water.

Coupling Cu Coordination Polymers with CdS Forming an S-Scheme Heterojunction for Rapid Charge Separation and High Photocatalytic Activity

Energy and the environment are significant impacting factors for the future development of humankind. In order to improve the corrosion resistance of CdS and decrease the recombination of photogenerated carriers, a novel Cu-CPs@CdS heterojunction with high efficiency mesopores was constructed by a simple hydrothermal method. The effective interfacial contact formation between nano-CdS and Cu-CPs promotes the transfer of photogenerated carriers while exhibiting a high spatial separation rate of charges. The photocatalytic performance of the heterojunction was evaluated by the photocatalytic degradation of organic pollutants and photocatalytic hydrogen generation. The photocatalytic degradation of ciprofloxacin (CIP) could reach 90.34%, and the hydrogen generation was high as 9227.82 μmol·g-1 under simulated sunlight irradiation. The boosted photocatalytic activity of Cu-CPs@CdS results from (i) the formation of coordination bonds, which not only enhanced the stability of heterojunctions but also provided a path for photogenerated carrier migration, (ii) integrating Cu-CPs, which provided more active sites, and (iii) the matched energy band structure between CdS and Cu-CPs that promoted speedy S-scheme interfacial charge-transfer pathways, culminating in efficient photogenerated charge separation and transfer. This research offered a fresh tactic to restrict photocorrosion and enhance the production of photocatalytic H2 over CdS-based catalysts.

Coupling photocatalytic CO2 reduction and CH3OH oxidation for selective dimethoxymethane production

Currently, conventional dimethoxymethane synthesis methods are environmentally unfriendly. Here, we report a photo-redox catalysis system to generate dimethoxymethane using a silver and tungsten co-modified blue titanium dioxide catalyst (Ag.W-BTO) by coupling CO2 reduction and CH3OH oxidation under mild conditions. The Ag.W-BTO structure and its electron and hole transfer are comprehensively investigated by combining advanced characterizations and theoretical studies. Strikingly, Ag.W-BTO achieve a record photocatalytic activity of 5702.49 µmol g-1 with 92.08% dimethoxymethane selectivity in 9 h of ultraviolet-visible irradiation without sacrificial agents. Systematic isotope labeling experiments, in-situ diffuse reflectance infrared Fourier-transform analysis, and theoretical calculations reveal that the Ag and W species respectively catalyze CO2 conversion to *CH2O and CH3OH oxidation to *CH3O. Subsequently, an asymmetric carbon-oxygen coupling process between these two crucial intermediates produces dimethoxymethane. This work presents a CO2 photocatalytic reduction system for multi-carbon production to meet the objectives of sustainable economic development and carbon neutrality.

Three-dimensional donor-acceptor conjugated porous polymers based on metal-porphyrin and triazine for highly effective photodegradation of organic pollutants in water

Three-dimensional donor-acceptor (D-A) type conjugated porous polymers (CPPs) was designed and synthesized via imine condensation of copper tetraaminoporphyrin (CuTAPP) as donor and 1,3,5-tris-(4-formyl phenyl) triazine (TFPT) as acceptor, named as CuPT-CPP. The CuPT-CPP possesses a high specific surface area (73.7 m2/g) and excellent photophysical properties. The simultaneous introduction of the organometallic molecules and D-A structures in CuPT-CPP could be broadened the visible-light response range (400-800 nm) and facilitated efficient photogenerated carrier separation and transportation. As heterogeneous photocatalysts, CuPT-CPP has excellent photocatalytic performances under visible light irradiation, leading to excellent model pollutant rhodamine B degradation efficiency up to about 100% in 3 h, it has superb stability and reusability during the photocatalytic processes, and CuPT-CPP also exhibited broad substrate adaptability, which could photocatalytic degradation of methylene blue (MB), methyl orange (MO), and tetracycline hydrochloride (TC). This work indicates that three-dimensional D-A type porphyrin- and triazine-based CuPT-CPP has great potential in the practical application of photocatalysis.

Green separation and decomposition of crystalline silicon photovoltaic module's backsheet by using ethanol

The treatment and recycling of discarded crystalline silicon photovoltaic modules (c-Si PV modules) has become a research focus, but few research have paid attention to the standardized treatment of c-Si PV module's fluorinated backsheet. Improper management of fluorinated backsheet can pose ecological and human health risks. Therefore, this study presents a novel method for processing the backsheet. The proposed approach entailed the utilization of ethanol (CH3CH2OH) to separate the backsheet from the PV module. Subsequently, the separated backsheet underwent decomposition using an alkaline ethanol (NaOH-CH3CH2OH) solution. Finally, the backsheet was recovered in the form of terephthalic acid (TPA) with a purity of 97.47 %. This recovered TPA can then serve as a valuable raw material for producing new backsheets, fostering a closed-loop material circulation. Experimental results demonstrate that immersing the PV module in a 75 % CH3CH2OH-H2O solution at a temperature of 343 K for 30 min achieved 100 % separation of the backsheet. Furthermore, subjecting the separated backsheet to a 60 min reaction in an NaOH-CH3CH2OH solution with a temperature of 343 K and a NaOH concentration of 1.0 mol/L achieved complete decomposition. The reaction mechanism was analyzed through characterization methods such as SEM/EDS, NMR, FTIR and XRD. This method is efficient, non-toxic organic reagent-free and environmentally friendly, so it holds significant potential for further development in the field of c-Si PV module recycling.

Fabrication of samarium doped MOF-808 as an efficient photocatalyst for the removal of the drug cefaclor from water

MOFs are emerging photocatalysts designed by tuning organic ligands and metal centers for optimal efficiency. In this study, a samarium decorated MOF-808(Ce) metal organic framework was fabricated by facile hydrothermal synthesis. The synthesized samarium decorated MOF-808(Ce) was characterized by using analytical techniques such as SEM, EDX, XRD and TGA to study its morphological, thermal and structural properties. SEM images showed that MOF-808(Ce) comprised of truncated octahedrons. The morphology of the material was changed upon Sm incorporation. Sm/MOF-808(Ce) exhibited better UV-vis light absorption properties than MOF-808(Ce) as evidenced by its slightly higher band gap value. This material was exploited for the degradation of the drug cefaclor from water. Cefaclor removal followed double a first order in parallel model (DFOP). Under UV light, 97.7% of the cefaclor was removed in only 20 minutes and after 60 minutes this removal efficiency was increased to 99.25%. These features exhibited that samarium decorated MOF has immense potential for the photocatalytic degradation of cefaclor as it generates e- and h+ to enhance the photocatalytic efficiency and it is a promising candidate to treat wastewater without formation of harmful byproducts.

A critical review on the recent trends of photocatalytic, antibacterial, antioxidant and nanohybrid applications of anatase and rutile TiO2 nanoparticles

Titanium dioxide nanoparticles (TiO2 NPs) have become a focal point of research due to their widespread daily use and diverse synthesis methods, including physical, chemical, and environmentally sustainable approaches. These nanoparticles possess unique attributes such as size, shape, and surface functionality, making them particularly intriguing for applications in the biomedical field. The continuous exploration of TiO2 NPs is driven by the quest to enhance their multifunctionality, aiming to create next-generation products with superior performance. Recent research efforts have specifically focused on understanding the anatase and rutile phases of TiO2 NPs and evaluating their potential in various domains, including photocatalytic processes, antibacterial properties, antioxidant effects, and nanohybrid applications. The hypothesis guiding this research is that by exploring different synthesis methods, particularly chemical and environmentally friendly approaches, and incorporating doping and co-doping techniques, the properties of TiO2 NPs can be significantly improved for diverse applications. The study employs a comprehensive approach, investigating the effects of nanoparticle size, shape, dose, and exposure time on performance. The synthesis methods considered encompass both conventional chemical processes and environmentally friendly alternatives, with a focus on how doping and co-doping can enhance the properties of TiO2 NPs. The research unveils valuable insights into the distinct phases of TiO2 NPs and their potential across various applications. It sheds light on the improved properties achieved through doping and co-doping, showcasing advancements in photocatalytic processes, antibacterial efficacy, antioxidant capabilities, and nanohybrid applications. The study concludes by emphasizing regulatory aspects and offering suggestions for product enhancement. It provides recommendations for the reliable application of TiO2 NPs, addressing a comprehensive spectrum of critical aspects in TiO2 NP research and application. Overall, this research contributes to the evolving landscape of TiO2 NP utilization, offering valuable insights for the development of innovative and high-performance products.

Simultaneous chelated heavy metals removal and sludge recovery through titanium coagulation: From waste to resource

Green methods for chelated heavy metals treatment and recovery are essential for coordinated development of resources and environment. Herein, a simple and competent method, titanium salt (TiCl4) coagulation was developed to remove and recycle chelated heavy metals. Our results revealed that this method proved to be effective for metals-citrate [Cu(II), Ni(II), Zn(II) and Cr(VI)], achieving removal efficiencies of 95 %, 92 %, 99 %, and 99 % within 30 min, surpassing direct alkaline precipitation and well-used Fe(III) coagulation. Whereafter, the copper-containing sludge was successfully transformed into copper-doped titanium dioxide (TiO2) photocatalysts by facile calcination. Through comprehensively investigating physicochemical properties by a suite of characterization techniques, we confirmed that doping of Cu induced bandgap narrowing, high specific surface area as well as the formation of oxygen vacancy. Accordingly, the recycling photocatalysts showed remarkable enhanced photocatalytic performance than the pristine TiO2, achieving improvement in the degradation efficiency of 82 %, 61 % and 67 % for carbamazepine(CBZ), bisphenol A (BPA) and methyl orange (MO). In addition, both radical (OH and O2-) and non-radical (1O2 and h+) pathways synergistically contributed to the removal of organic pollutants during photocatalysis. Ultimately, based on economic feasibility assessment and life cycle assessment (LCA), the copper-containing titanium coagulation sludge reuse for photocatalyst could bring lower carbon emissions, reduced environmental risks and higher economic benefits. The elucidation of this study provides new insights into the removal and recycle of chelated heavy metals from wastewater by using an environment-friendly and cost-effective method.

Size-dependent photocatalytic inactivation of Microcystis aeruginosa and degradation of microcystin by a copper metal organic framework

Water eutrophication has led to increasingly serious algal blooms (HABs) that pose significant threats to aquatic environmental and human health. Differently sized copper metal organic frameworks (Cu-MOFs), including Cu-MOF-1 (30 nm), Cu-MOF-2, (40 nm), Cu-MOF-3 (50 nm), and Cu-MOF-4 (1 µm×100 nm), were synthesized. Their performance in inactivating Microcystis aeruginosa and degrading microcystin was assessed at the concentration of 0-60 mg/L under visible light irradiation for 6 h. The photocatalytic antialgal activity of Cu-MOF-4 was 10.5%, 14.2%, and 31.2% higher than that of Cu-MOF-3, Cu-MOF-2, and Cu-MOF-1; the efficacy in photocatalytic degradation of microcystin induced by Cu-MOFs also exhibited significant size-dependent efficiency, where Cu-MOF-4 was 2.6-, 1.8-, and 2.0-fold of Cu-MOF-3, Cu-MOF-2, and Cu-MOF-1, respectively. Cu-MOF-4 had greater performance than other Cu-MOFs could attributed to: 1) Cu-MOF-4 is easier to interact with algal cells due to its lower surface negative charge and higher hydrophobicity, resulting in more photocatalyst-algae heteroaggregates formation; 2) Cu-MOF-4 had greater electron-hole pairs separation ability, thus exhibiting higher reactive oxygen species (ROS) production; 3) Cu-MOF-4 had greater hydrostability than other Cu-MOFs, leading to more sustained ROS generation. Additionally, the reusability of Cu-MOF-4 was also greater than other Cu-MOFs.

Interface engineering of 0D/2D Cu2O/BiOBr Z-scheme heterojunction for efficient degradation of sulfamethoxazole: Mechanism, degradation pathway, and DFT calculation

Constructed heterojunction has been considered an efficient strategy to enhance the migration and transfer of photoinduced charge carriers. Herein, a Z-scheme Cu2O/BiOBr heterojunction with 0D/2D structure was fabricated by microwave hydrothermal method. It was found that the optimal composites photocatalyst showed excellent activity for sulfamethoxazole (SMZ) illumination, and the removal rate reached 90.7%, which was higher than pristine Cu2O (53.0%) and BiOBr (60.0%). Subsequently, the operational parameters such as catalyst dosage, concentrations of pollutants, and pH of solution were investigated. According to the ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRs), Mott-Schottky curve, and density functional theory (DFT) analysis, the Z-scheme degradation mechanism of Cu2O/BiOBr heterostructure was proposed. Among them, the interface structure of 0-dimensions/2-dimensions (0D/2D) can significantly increase the number of heterojunctions in the composite catalyst, and Z-scheme heterostructures can accelerate the generation and migration of photoinduced charge carriers, which has a facilitation effect on improving the decomposition activity of the photocatalyst. Moreover, three possible pathways for SMZ degradation were inferred. This study provides a promising strategy for constructing novel heterojunctions with high photocatalytic performance.

Recent Progress in 2D Metal-Organic Framework-Related Materials

2D metal-organic frameworks-based (2D MOF-related) materials benefit from variable topological structures, plentiful open active sites, and high specific surface areas, demonstrating promising applications in gas storage, adsorption and separation, energy conversion, and other domains. In recent years, researchers have innovatively designed multiple strategies to avoid the adverse effects of conventional methods on the synthesis of high-quality 2D MOFs. This review focuses on the latest advances in creative synthesis techniques for 2D MOF-related materials from both the top-down and bottom-up perspectives. Subsequently, the strategies are categorized and summarized for synthesizing 2D MOF-related composites and their derivatives. Finally, the current challenges are highlighted faced by 2D MOF-related materials and some targeted recommendations are put forward to inspire researchers to investigate more effective synthesis methods.

The selection of floating photocatalyst carrier and algae inhibition effect of Karenia mikimotoi based on SNP-TiO2@Cu-MOF under visible light

Photocatalytic technology for inactivating harmful algae has shown great research potential, in previous work, a kind of non-noble metal modified TiO2 loading onto copper metal organic framework (SNP-TiO2@Cu-MOF) was proved to show high removal efficiency against Karenia mikimotoi (K. mikimotoi). However, the recovery problem of powdered photocatalysts and its potential ecological hazards were still existed. In order to solve this, this study selected four macro-floating carriers and loaded photocatalyst on their surface. The floating photocatalyst with luffa sponge and expanded perlite as carriers were prepared by hydrothermal synthesis, and the floating photocatalyst with melamine sponge and polyurethane sponge as carriers were prepared by sodium alginate fixation method. The photocatalyst was firmly supported on the carriers, and the octahedral structure of SNP-TiO2@Cu-MOF photocatalyst could be well retained by hydrothermal synthesis. The advantages of sodium alginate fixation method were simple preparation process and low cost. The specific surface area of melamine foam photocatalyst (MF-P) was the highest, 28.47 m2/g, and the algae inactivation rate was also the best, which was 98.68% in 6 h. The MF-P group showed a decrease of 81.8% in soluble protein content and 81.4% in chlorophyll-a content of K. mikimotoi after 1 h of photocatalysis, respectively. The four photocatalysts showed good recyclability, and especially in MF-P group. The inactivation efficiency was still as high as 94.12% after four experiments. The floating photocatalyst would lay the foundation for further application of photocatalytic materials for algae removal.

Bagasse cellulose-based S-type Bi2O3/Zn3In2S6 photocatalyst for efficient and stable degradation of 2,4-dichlorophenol under visible light

The environmental and human health hazards posed by 2,4-dichlorophenol (2,4-DCP) call for effective degradation technologies. This research investigates the design and application of a Bi2O3/Zn3In2S6 heterojunction photocatalyst, a 'S scheme', which was constructed via a simple hydrothermal method. The photocatalyst was then embedded in a sugarcane bagasse cellulose carrier (SBC/BO/ZIS), demonstrating excellent 2,4-DCP degradation capacity. The results show that S-type Bi2O3/Zn3In2S6 promotes the separation of photogenerated carriers. The SBC/BO/ZIS complex, in comparison with Bi2O3 and Zn3In2S6 alone, amplifies specific surface area (91.7880 m2/g) and broadens the light absorption range (570 nm) of materials, showing robust photocatalytic performance. The degradation rate of 50 mg/L 2,4-DCP reached an impressive 97% within 120 min. The encapsulation of BO/ZIS in SBC not only increases the efficiency of material recovery and recycling but also allows for continuous degradation of 2,4-DCP in cyclic manners, maintaining a degradation rate between 90% and 97%. XRD characterization shows that the physical properties of the material are not affected. The degradation of 2,4-DCP was dominantly controlled by active species (·OH and ·O2-) identified by electron paramagnetic resonance analysis and free radical trapping experiments. This innovative design significantly enhances sunlight utilization and effectively curbs charge carrier recombination, while also promoting material recovery and utilization. These attributes establish a foundation for a cost-effective and efficient means of treating actual wastewater containing 2,4-DCP.

A review of metal-organic framework (MOF) materials as an effective photocatalyst for degradation of organic pollutants

Water plays a vital role in all aspects of life. Recently, water pollution has increased exponentially due to various organic and inorganic pollutants. Organic pollutants are hard to degrade; therefore, cost-effective and sustainable approaches are needed to degrade these pollutants. Organic dyes are the major source of organic pollutants from coloring industries. The photoactive metal-organic frameworks (MOFs) offer an ultimate strategy for constructing photocatalysts to degrade pollutants present in wastewater. Therefore, tuning the metal ions/clusters and organic ligands for the better photocatalytic activity of MOFs is a tremendous approach for wastewater treatment. This review comprehensively reports various MOFs and their composites, especially POM-based MOF composites, for the enhanced photocatalytic degradation of organic pollutants in the aqueous phase. A brief discussion on various theoretical aspects such as density functional theory (DFT) and machine learning (ML) related to MOF and MOF composite-based photocatalysts has been presented. Thus, this article may eventually pave the way for applying different structural features to modulate novel porous materials for enhanced photodegradation properties toward organic pollutants.

Highly efficient ultrasound-driven Cu-MOF/ZnWO4 heterostructure: An efficient visible-light photocatalyst with robust stability for complete degradation of tetracycline

Metal-organic frameworks (MOFs) are a significant class of porous, crystalline materials composed of metal ions (clusters) and organic ligands. The potential use of copper MOF (Cu-BTC) for the sonophotocatalytic degradation of Tetracycline (TC) antibiotic was investigated in this study. To enhance its catalytic efficiency, S-scheme heterojunction was created by combining Cu-BTC with Zinc tungstate (ZnWO4), employing an ultrasound-assisted hydrothermal method. The results demonstrated that the Cu-BTC/ZnWO4 heterojunction exhibited complete removal of TC within 60 min under simultaneous irradiation of visible light and ultrasound. Interestingly, the sonophotocatalytic degradation of TC using the Cu-BTC/ZnWO4 heterojunction showed superior efficiency (with a synergy index of ∼0.70) compared to individual sonocatalytic and photocatalytic degradation processes using the same heterojunction. This enhancement in sonophotocatalytic activity can be attributed to the formation of an S-scheme heterojunction between Cu-BTC and ZnWO4. Within this heterojunction, electrons migrated from Cu-BTC to ZnWO4, facilitated by the interface between the two materials. Under visible light irradiation, the built-in electric field, band edge bending, and coulomb interaction synergistically inhibited the recombination of electron-hole pairs. Consequently, the accumulated electrons in Cu-BTC and holes in ZnWO4 actively participated in the redox reactions, generating free radicals that effectively attacked the TC molecules. This study offers valuable perspectives on the application of a newly developed S-scheme heterojunction photocatalyst, demonstrating its effectiveness in efficiently eliminating diverse recalcitrant pollutants via sonophotocatalytic degradation.

Carbon Dots as an Electron Acceptor in the ZnIn2S4@MIL-88A Heterojunction for Enhanced Visible-Light-Driven Photocatalytic Hydrogen Evolution

In this study, visible-light-responsive carbon dots (CDs)/ZnIn2S4@MIL-88A (C/ZI@ML) photocatalysts were successfully prepared through in situ loading CDs and ZnIn2S4 nanosheets on MIL-88A(Fe) to form a ternary heterojunction. The detailed characterization indicated that the two-dimensional ZnIn2S4 nanosheets were uniformly coated on the surface of MIL-88A(Fe), and ZnIn2S4/MIL-88A(Fe) exhibited enhanced photocatalytic hydrogen production performance (1259.63 μmol h-1 g-1) compared to that of pristine MIL-88A(Fe) and ZnIn2S4 under visible light illumination. After introduction of CDs into ZnIn2S4/MIL-88A(Fe), the C/ZI@ML catalyst remarkably enhanced the photocatalytic activity and the hydrogen evolution rate of 1C/ZI@ML was up to 3609.23 μmol g-1 h-1. The photoinduced charge carriers of C/ZI@ML can be efficiently separated and migrated because of the close contacted interface, synergistic effect, and suitable band structure. In combination with photoelectrochemical experiments and electron paramagnetic resonance spectra, a possible photocatalytic mechanism over C/ZI@ML was proposed. This work demonstrated a facile preparation method for fabricating efficient visible-light-driven heterojunction photocatalysts.

Boosting the adsorptive and photocatalytic performance of MIL-101(Fe) against methylene blue dye through a thermal post-synthesis modification

Photocatalytic degradation under ultra-low powered light is a viable advanced oxidation process technique against extensive emerging contaminants. As a new and remarkable class of nanoporous materials, metal-organic frameworks (MOFs), attract interest for the supreme adsorptive and photocatalytic functionalities. An outstanding MOF, MIL-101(Fe) chosen as a photocatalyst template for the synthesis of α-Fe2O3 by a simple thermal modification to improve the structural properties toward methylene blue (MB) eradication. Octahedron-like α-Fe2O3 photocatalyst (Modified MIL-101(Fe), M-MIL-101(Fe)) was superior in dispersion and separation properties in aqueous medium. Moreover, the adsorptive and catalytic performance was increased for modified form by ~ 7.3% and ~ 17.1% compared to pristine MIL-101(Fe), respectively. Synergistic improvement of MB removal achieved by simultaneous adsorption/degradation under 5-W LED irradiation. Parametric study indicated an 18.1% and 44.5% improvement in MB removal was observed by increasing pH from 4 to 10, and M-MIL-101(Fe) dose from 0.2 to 1 g L-1, respectively. MB removal followed the pseudo-second-order kinetics model and the process efficiency dropped by 38% as MB concentration increased from 5 to 20 mg L-1. Radical trapping tests revealed the significant role of [Formula: see text] and electron radicals as the major participants in dye degradation. A significant loss in the efficiency of M-MIL-101(Fe) was observed in the reusability tests that is good to study further. In conclusion, a simple thermal post-synthesis modification on MIL-101(Fe) improved its structural, catalytic, and adsorptive properties against MB.

Visible-Light-Activated Carbon Dot Photocatalyst for ROS-Mediated Inhibition of Algae Growth

The growing occurrence of detrimental algal blooms resulting from industrial and agricultural activities emphasizes the urgency of implementing efficient removal strategies. In this study, we have successfully synthesized stable and biocompatible carbon dots (R-CDs) capable of generating reactive oxygen species (ROS) upon exposure to natural light irradiation. Phaeocystis globosa Scherffel (PGS) was selected as a representative model for conducting anti-algal experiments. Remarkably, in the presence of R-CDs, the complete eradication of harmful algae within a simulated light exposure period of 27 h was achieved. Furthermore, fluorescence lifetime imaging microscopy (FLIM) was first employed to study the physiological processes involved in the oxidative stress induced by PGS when subjected to ROS attack. The findings of this study demonstrate the potential of R-CDs as a highly promising anti-algal agent. This elucidation of the mechanism contributes to a comprehensive understanding of the efficacy and effectiveness of such agents in combating algal growth, further inspiring the development of other anti-algal agents.

Nanoparticles, an Emerging Control Method for Harmful Algal Blooms: Current Technologies, Challenges, and Perspectives

Harmful algal blooms (HABs) are a global concern because they harm aquatic ecosystems and pose a risk to human health. Various physical, chemical, and biological approaches have been explored to control HABs. However, these methods have limitations in terms of cost, environmental impact, and effectiveness, particularly for large water bodies. Recently, the use of nanoparticles has emerged as a promising strategy for controlling HABs. Briefly, nanoparticles can act as anti-algae agents via several mechanisms, including photocatalysis, flocculation, oxidation, adsorption, and nutrient recovery. Compared with traditional methods, nanoparticle-based approaches offer advantages in terms of environmental friendliness, effectiveness, and specificity. However, the challenges and risks associated with nanoparticles, such as their toxicity and ecological impact, must be considered. In this review, we summarize recent research progress concerning the use of nanoparticles to control HABs, compare the advantages and disadvantages of different types of nanoparticles, discuss the factors influencing their effectiveness and environmental impact, and suggest future directions for research and development in this field. Additionally, we explore the causes of algal blooms, their harmful effects, and various treatment methods, including restricting eutrophication, biological control, and disrupting living conditions. The potential of photocatalysis for generating reactive oxygen species and nutrient control methods using nanomaterials are also discussed in detail. Moreover, the application of flocculants/coagulants for algal removal is highlighted, along with the challenges and potential solutions associated with their use. This comprehensive overview aims to contribute to the development of efficient and sustainable strategies for controlling HAB control.

Synthesis of efficient light harvesting Cr, N Co-doped TiO2 nanoparticles for enhanced visible light photocatalytic degradation of xanthene dyes; eosin yellow and rose bengal

To solve the problem of water pollution, using environment friendly and cost effective method in short time is the need of hour. In this work, chromium (Cr) and nitrogen (N) co-doped TiO2 nanoparticles were synthesized and were used for the photocatalytic degradation of dyes under visible light. The synergistic effect of metal and non-metal co-dopants added would result in appropriate reduction of band gap {from 3.2 eV of TiO2 to 2.67 eV}, decrease in recombination rate of charge carriers by trapping electrons and holes, and in better light harvesting capacity. Nanoparticles were synthesized by sol-gel method and characterized using ultraviolet-visible (UV-VIS) spectroscopy, fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM), zeta potential, X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) analysis, field emission scanning electron microscopy (FE-SEM), and RAMAN spectroscopy. Eosin yellow (EY) and rose bengal (RB) were subjected to photocatalytic degradation under solar light to check the photocatalytic activity of the synthesized nanoparticles. Effects of dye concentration, the concentration of nanoparticles, time, and pH were investigated to optimize the parameters. The results obtained were remarkable for 20 ppm EY solution took 10 min using 1 gL-1 NPs at pH 3 and 10 ppm RB solution took 5 min using 0.75 gL-1 NPs at pH 5.78 (original pH) for complete degradation. Kinetics studies were also performed and both dyes followed pseudo-second-order kinetics with R2 values 0.99312 and 0.99712 for EY and RB, respectively. The study of degraded products was conducted using high-performance liquid chromatography (HPLC) hyphenated with electron spray ionization mass spectroscopy (ESI-MS) (LC-MS) and possible degradation pathways were made for both dyes. A reusability test was also performed showing the efficiency of the particles was up to 88% after 3 cycles of use. These notable results can be attributed to the efficient removal of organic pollutants using the proposed dopants in this study.

ZnWO4 nanorod-colloidal SnO2 quantum dots core@shell heterostructures: Efficient solar-light-driven photocatalytic degradation of tetracycline

Zinc tungsten oxide (ZW) and colloidal SnO₂ quantum dots (CS) were synthesized individually by hydrothermal and wet chemical methods. ZW-CS core@shell nanorods were prepared using a sonochemical method for the enhanced photocatalytic activity of tetracycline (TC) degradation. ZW-CS core@shell nanorods were systematically characterized by structural, morphological mapping and optical techniques. All characterization techniques were synchronized to confirm the construction of core@shell nanorods. Optical absorption studies indicate an increased light-capturing efficiency along with a reduced bandgap from 3.56 to 3.23 eV, which is further supported by photoluminescence. Mapping analysis from SEM and HR-TEM evidence the presence of elements as well as a core@shell nanostructure. The optimized sample of ZW-CS 1.0 shows improved photocatalytic degradation of TC under stimulated solar light. The TC degradation efficiency by ZW-CS 1.0 core@shell nanorods was about 97% within 2 h. The formation of core@shell nanorod structure might be the reason for the better photocatalytic tetracycline degradation performance.

Comparative ecotoxicity of graphene, functionalized multi-walled CNTs, and their mixture in freshwater microalgae, Scenedesmus obliquus: analyzing the role of oxidative stress

Due to their remarkable properties, the applications of carbon-based nanomaterials (CNMs) such as graphene and functionalized multi-walled carbon nanotubes (f-MWCNTs) are increasing. These CNMs can enter the freshwater environment via numerous routes, potentially exposing various organisms. The current study assesses the effects of graphene, f-MWCNTs, and their binary mixture on the freshwater algal species Scenedesmus obliquus. The concentration for the individual materials was kept at 1 mg L^-1, while graphene and f-MWCNTs were taken at 0.5 mg L^-1 each for the combination. Both the CNMs caused a decrease in cell viability, esterase activity, and photosynthetic efficiency in the cells. The cytotoxic effects were accompanied by increased hydroxyl and superoxide radical generation, lipid peroxidation, antioxidant enzyme activity (catalase and superoxide dismutase), and mitochondrial membrane potential. Graphene was more toxic compared to f-MWCNTs. The binary mixture of the pollutants demonstrated a synergistic enhancement of the toxic potential. Oxidative stress generation played a critical role in toxicity responses, as noted by a strong correlation between the physiological parameters and the biomarkers of oxidative stress. The outcomes from this study emphasize the significance of considering the combined effects of various CNMs as part of a thorough evaluation of ecotoxicity in freshwater organisms.

Recent advances in Metal Organic Framework (MOF)-based hierarchical composites for water treatment by adsorptional photocatalysis: A review

Architecting a desirable and highly efficient nanocomposite for applications like adsorption, catalysis, etc. has always been a challenge. Metal Organic Framework (MOF)-based hierarchical composite has perceived popularity as an advanced adsorbent and catalyst. Hierarchically structured MOF material can be modulated to allow the surface interaction (external or internal) of MOF with the molecules of interest. They are well endowed with tunable functionality, high porosity, and increased surface area epitomizing mass transfer and mechanical stability of the fabricated nanostructure. Additionally, the anticipated optimization of nanocomposite can only be acquired by a thorough understanding of the synthesis techniques. This review starts with a brief introduction to MOF and the requirement for advanced nanocomposites after the setback faced by conventional MOF structures. Further, we discussed the background of MOF-based hierarchical composites followed by synthetic techniques including chemical and thermal treatment. It is important to rationally validate the successful nanocomposite fabrication by characterization techniques, an overview of challenges, and future perspectives associated with MOF-based hierarchically structured nanocomposite.

Opportunities from Metal Organic Frameworks to Develop Porous Carbons Catalysts Involved in Fine Chemical Synthesis

In the last decade, MOFs have been proposed as precursors of functional porous carbons with enhanced catalytic performances by comparison with other traditional carbonaceous catalysts. This area is rapidly growing mainly because of the great structural diversity of MOFs offering almost infinite possibilities. MOFs can be considered as ideal platforms to prepare porous carbons with highly dispersed metallic species or even single-metal atoms under strictly controlled thermal conditions. This review briefly summarizes synthetic strategies to prepare MOFs and MOF-derived porous carbons. The main focus relies on the application of the MOF-derived porous carbons to fine chemical synthesis. Among the most explored reactions, the oxidation and reduction reactions are highlighted, although some examples of coupling and multicomponent reactions are also presented. However, the application of this type of catalyst in the green synthesis of biologically active heterocyclic compounds through cascade reactions is still a challenge.

Enhanced antibiotic wastewater degradation by intimately coupled B-Bi3O4Cl photocatalysis and biodegradation reactor: Elucidating degradation principle systematically

Intimately coupled photocatalysis and biodegradation (ICPB) is an emerging technology that has potential applications in the degradation of bio-recalcitrant pollutants. However, the interaction principles between photocatalysts and biofilms in ICPB have not been well developed. This article covers a cooperative degradation scheme coupling photocatalysis and biodegradation for efficient degradation and mineralization of ciprofloxacin (CIP) using ICPB with B-doped Bi₃O₄Cl as the photocatalyst. In consequence, a removal rate of ∼95 % is reached after 40 d. The biofilms inside the ICPB carriers can mineralize the photocatalytic products, thus improving the removal rate of total organic carbon (TOC) by more than 20 %. Interior biofilms are not destroyed by CIP or photocatalysis, and they adapt to ICPB of CIP by enriching in Pseudoxanthomonas, Ferruginibacter, Clostridium, Stenotrophomonas and Comamonas and reconstructing their microbial communities using energy produced by the light-excited photoelectrons. Furthermore, this research gives new opinion into the degradation principles of the ICPB system.

Influence of Calcination Temperature on Photocatalyst Performances of Floral Bi2O3/TiO2 Composite

Heterojunction photocatalytic materials show excellent performance in degrading toxic pollutants. This study investigates the influence of calcination temperature on the performances of floral Bi2O3/TiO2 composite photocatalyst crystal, which was prepared with glycerol, bismuth nitrate, and titanium tetrachloride as the major raw materials via the solvothermal method. XRD, SEM/TEM, BET, Uv-vis, and XPS were employed to analyze the crystal structure, morphology, specific surface area, band gap, and surface chemical structure of the calcined temperature catalysts. The calcination temperature influence on the catalytic performance of composite photocatalysis was tested with rhodamine B (RhB) as the degradation object. The results revealed the high catalytic activity and higher photocatalytic performance of the Bi2O3/TiO2 catalyst. The degradation efficiency of the Bi2O3/TiO2 catalyst to RhB was 97%, 100%, and 91% at 400 °C, 450 °C, and 500 °C calcination temperatures, respectively, in which the peak degradation activity appeared at 450 °C. The characterization results show that the appropriate calcination temperature promoted the crystallization of the Bi2O3/TiO2 catalyst, increased its specific surface area and the active sites of catalytic reaction, and improved the separation efficiency of electrons and holes.