Modification of the surfaces of medical devices to prevent microbial adhesion and biofilm formation

Sources, interactions, influencing factors and ecological risks of microplastics and antibiotic resistance genes in soil: A review

Microplastics (MPs) and antibiotic resistance genes (ARGs) are gaining increasing attention as they pose a threat to the ecological environment and human health as emerging contaminants. MPs has been proved to be a hot spot in ARGs, and although it has been extensively studied in water environment, the results of bibliometrics statistical analysis in this paper showed that relevant studies in soil ecological environment are currently in the initial stage. In view of this, the paper provides a systematic review of the sources, interactions, influencing factors, and ecological risks associated with MPs and ARGs in soil environments. Additionally, the mechanism and influencing factors of plastisphere formation and resistance are elaborated in detail. The MPs properties, soil physicochemical properties, soil environmental factors and agricultural activities are the primarily factors affecting the interaction between MPs and ARGs in soil. Challenges and development directions of related research in the future are also prospected. It is hoped that the review could assist in a deeper comprehension and exploration of the interaction mechanism between MPs and ARGs in soil as well as the function of MPs in the transmission process of ARGs among diverse environmental media and organisms, and provide theory basis and reference for the MPs and ARGs pollution control and remediation in soil.

Molecular imaging of bacterial biofilms-a systematic review

The formation of bacterial biofilms in the human body and on medical devices is a serious human health concern. Infections related to bacterial biofilms are often chronic and difficult to treat. Detailed information on biofilm formation and composition over time is essential for a fundamental understanding of the underlying mechanisms of biofilm formation and its response to anti-biofilm therapy. However, information on the chemical composition, structural components of biofilms, and molecular interactions regarding metabolism- and communication pathways within the biofilm, such as uptake of administered drugs or inter-bacteria communication, remains elusive. Imaging these molecules and their distribution in the biofilm increases insight into biofilm development, growth, and response to environmental factors or drugs. This systematic review provides an overview of molecular imaging techniques used for bacterial biofilm imaging. The techniques included mass spectrometry-based techniques, fluorescence-labelling techniques, spectroscopic techniques, nuclear magnetic resonance spectroscopy (NMR), micro-computed tomography (µCT), and several multimodal approaches. Many molecules were imaged, such as proteins, lipids, metabolites, and quorum-sensing (QS) molecules, which are crucial in intercellular communication pathways. Advantages and disadvantages of each technique, including multimodal approaches, to study molecular processes in bacterial biofilms are discussed, and recommendations on which technique best suits specific research aims are provided.

Preparation and Antibacterial Properties of Polyelectrolyte Complexed Nanoparticles Aggregated from PHMG and Sodium Caffeate

In this study, we synthesized polyelectrolyte complexed nanoparticles using an ion exchange reaction between poly(hexamethylene guanidine hydrochloride) and sodium caffeate. The morphology of the obtained antiparticle was observed by scanning electron microscopy, and FT-IR and XPS were employed for the structural characterization. The antimicrobial properties of E. coli and S. aureus were characterized through minimum inhibitory concentration (MIC), growth curve analysis, plate colony counting method, and crystal violet method. Notably, the sample showed a 100% bactericidal rate against E. coli at 0.095 μg/mL and against S. aureus at 0.375 μg/mL within 1 h, demonstrating excellent antimicrobial performance against E. coli and S. aureus. The CA-PHMG-containing acrylic resin coatings exhibited exceptional antimicrobial and antiadhesive properties when examined under an inverted fluorescence microscope, particularly at a 4% weight concentration of the antibacterial agent. This study holds vast potential for development in the field of antimicrobial coatings.

Pentadecanoic Acid-Releasing PDMS: Towards a New Material to Prevent S. epidermidis Biofilm Formation

Microbial biofilm formation on medical devices paves the way for device-associated infections. Staphylococcus epidermidis is one of the most common strains involved in such infections as it is able to colonize numerous devices, such as intravenous catheters, prosthetic joints, and heart valves. We previously reported the antibiofilm activity against S. epidermidis of pentadecanoic acid (PDA) deposited by drop-casting on the silicon-based polymer poly(dimethyl)siloxane (PDMS). This material exerted an antibiofilm activity by releasing PDA; however, a toxic effect on bacterial cells was observed, which could potentially favor the emergence of resistant strains. To develop a PDA-functionalized material for medical use and overcome the problem of toxicity, we produced PDA-doped PDMS by either spray-coating or PDA incorporation during PDMS polymerization. Furthermore, we created a strategy to assess the kinetics of PDA release using ADIFAB, a very sensitive free fatty acids fluorescent probe. Spray-coating resulted in the most promising strategy as the concentration of released PDA was in the range 0.8-1.5 μM over 21 days, ensuring long-term effectiveness of the antibiofilm molecule. Moreover, the new coated material resulted biocompatible when tested on immortalized human keratinocytes. Our results indicate that PDA spray-coated PDMS is a promising material for the production of medical devices endowed with antibiofilm activity.

Antibiofilm Activity of Combretum micranthum G. Don Catechin-Sugar Phytocomplex on Pseudomonas aeruginosa

Clinicians often have to face infections caused by microorganisms that are difficult to eradicate due to their resistance and/or tolerance to antimicrobials. Among these pathogens, Pseudomonas aeruginosa causes chronic infections due to its ability to form biofilms on medical devices, skin wounds, ulcers and the lungs of patients with Cystic Fibrosis. In this scenario, the plant world represents an important reservoir of natural compounds with antimicrobial and/or antibiofilm properties. In this study, an extract from the leaves of Combretum micranthum G. Don, named Cm4-p, which was previously investigated for its antimicrobial activities, was assayed for its capacity to inhibit biofilm formation and/or to eradicate formed biofilms. The model strain P. aeruginosa PAO1 and its isogenic biofilm hyperproducer derivative B13 were treated with Cm4-p. Preliminary IR, UV-vis, NMR, and mass spectrometry analyses showed that the extract was mainly composed of catechins bearing different sugar moieties. The phytocomplex (3 g/L) inhibited the biofilm formation of both the PAO1 and B13 strains in a significant manner. In light of the obtained results, Cm4-p deserves deeper investigations of its potential in the antimicrobial field.

Potential environmental risks of field bio/non-degradable microplastic from mulching residues in farmland: Evidence from metagenomic analysis of plastisphere

The plastisphere may act as reservoir of antibiotic resistome, accelerating global antimicrobial resistance dissemination. However, the environmental risks in the plastisphere of field microplastics (MPs) in farmland remain largely unknown. Here, antibiotic resistance genes (ARGs) and virulence factors (VFs) on polyethylene microplastics (PE-MPs) and polybutylene adipate terephthalate and polylactic acid microplastics (PBAT/PLA-MPs) from residues were investigated using metagenomic analysis. The results suggested that the profiles of ARG and VF in the plastisphere of PBAT/PLA-MPs had greater number of detected genes with statistically higher values of diversity and abundance than soil and PE-MP. Procrustes analysis indicated a good fitting correlation between ARG/VF profiles and bacterial community composition. Actinobacteria was the major host for tetracycline and glycopeptide resistance genes in the soil and PE-MP plastisphere, whereas the primary host for multidrug resistance genes changed to Proteobacteria in PBAT/PLA-MP plastisphere. Besides, three human pathogens, Sphingomonas paucimobilis, Lactobacillus plantarum and Pseudomonas aeruginosa were identified in the plastisphere. The PE-MP plastisphere exhibited a higher transfer potential of ARGs than PBAT/PLA-MP plastisphere. This work enhances our knowledge of potential environmental risks posed by microplastic in farmland and provides valuable insights for risk assessment and management of agricultural mulching applications.

Regulating bacterial biofilms in food and biomedicine: unraveling mechanisms and Innovating strategies

Bacterial biofilm has brought a lot of intractable problems in food and biomedicine areas. Conventional biofilm control mainly focuses on inactivation and removal of biofilm. However, with robust construction and enhanced resistance, the established biofilm is extremely difficult to eradicate. According to the mechanism of biofilm development, biofilm formation can be modulated by intervening in the key factors and regulatory systems. Therefore, regulation of biofilm formation has been proposed as an alternative way for effective biofilm control. This review aims to provide insights into the regulation of biofilm formation in food and biomedicine. The underlying mechanisms for early-stage biofilm establishment are summarized based on the key factors and correlated regulatory networks. Recent developments and applications of novel regulatory strategies such as anti/pro-biofilm agents, nanomaterials, functionalized surface materials and physical strategies are also discussed. The current review indicates that these innovative methods have contributed to effective biofilm control in a smart, safe and eco-friendly way. However, standard methodology for regulating biofilm formation in practical use is still missing. As biofilm formation in real-world systems could be far more complicated, further studies and interdisciplinary collaboration are still needed for simulation and experiments in the industry and other open systems.

Influence of adhesion force on croRS gene expression and antibiotic resistance of Enterococcus faecalis

Surface properties of materials influence bacterial adhesion and play important roles in biofilm antibiotic resistance. The two-component system CroRS of Enterococcus faecalis (E. faecalis) can be activated by antibiotics and is involved in cephalosporin resistance. We hypothesized that surfaces properties could influence the expression of croRS in E. faecalis biofilm and contribute to cephalosporin resistance. In this study, the hydrophobicity of poly-ethylene (PE) and stainless steel (SS) was characterized. Adhesion forces were measured using atomic force microscopy. The transcript levels of croRS in E. faecalis adhering to surfaces exerting different adhesion forces were compared, in presence and absence of cephalosporin. The ceftriaxone susceptibility of E. faecalis biofilms was investigated using colony forming units (CFU) counting. The water contact angles of PE and SS were 97.1 ± 0.3° and 33.5 ± 0.3°, respectively (p < .05). The adhesion force of E. faecalis on PE was 7.6 ± 1.0 nN, which was higher than that on SS surfaces (3.5 ± 0.5 nN, p < .05). The gene expression of croS and croR in E. faecalis was higher on PE compared to that on SS (p < .05). E. faecalis on the hydrophobic PE surfaces, exerting stronger adhesion force, was more resistant to ceftriaxone compared to that on more hydrophilic SS surfaces. Results revealed the surface properties of materials can modulate the expression of croRS system and interfere with the outcome of antimicrobial therapy of E. faecalis biofilm. The modification of surface properties of biomedical devices may be used as a strategy to increase the efficacy of antimicrobial therapy.

Biosynthesized silver nanoparticles-capped chondroitin sulfate nanogel targeting microbial infections and biofilms for biomedical applications

Medical devices are essential for patient care, but they can also serve as havens for dangerous microbes and the development of biofilm, which can lead to serious infections and higher death rates. To meet these issues, it is crucial to develop novel and effective antimicrobial coatings for medical devices. In this context, we have developed a new biofunctionalized nanosilver (ICS-Ag), employing itaconyl-chondroitin sulfate nanogel (ICSNG) as a synergistic reducing and stabilizing agent, to effectively eradicate microbial infections and biofilm formation. The antibacterial investigations showed that ICS-Ag nanocomposite is an intriguing antibiotic with excellent antibacterial indices (MIC/MBC (μg/mL): 2.29/4.58, 1.25/2.50, and 1.36/1.36 against S. aureus, E. coli, and P. aeruginosa, respectively), as well as antifungal capacity. Furthermore, ICS-Ag demonstrated efficacy superior to that of the antibiotic (ciprofloxacin, Cipro) against both Gram-positive and Gram-negative bacterial biofilms. TEM images of untreated and treated bacterial strains demonstrate synergistic actions that harm the bacterial cytomembrane, leading to the release of intracellular contents and bacterial death. Interestingly, ICS-Ag shows excellent biocompatibility, with an IC50 value (71.25 μg/mL) higher than MICs against tested microbes. Overall, the ICS-Ag film may provide multifunctional antimicrobial coatings for medical equipment to reduce microbial contamination and biofilm development.

Surface Conditioning Effects on Submerged Optical Sensors: A Comparative Study of Fused Silica, Titanium Dioxide, Aluminum Oxide, and Parylene C

Optical sensors excel in performance but face efficacy challenges when submerged due to potential surface colonization, leading to signal deviation. This necessitates robust solutions for sustained accuracy. Protein and microorganism adsorption on solid surfaces is crucial in antibiofilm studies, contributing to conditioning film and biofilm formation. Most studies focus on surface characteristics (hydrophilicity, roughness, charge, and composition) individually for their adhesion impact. In this work, we tested four materials: silica, titanium dioxide, aluminum oxide, and parylene C. Bovine Serum Albumin (BSA) served as the biofouling conditioning model, assessed with X-ray photoelectron spectroscopy (XPS). Its effect on microorganism adhesion (modeled with functionalized microbeads) was quantified using a shear stress flow chamber. Surface features and adhesion properties were correlated via Principal Component Analysis (PCA). Protein adsorption is influenced by nanoscale roughness, hydrophilicity, and likely correlated with superficial electron distribution and bond nature. Conditioning films alter the surface interaction with microbeads, affecting hydrophilicity and local charge distribution. Silica shows a significant increase in microbead adhesion, while parylene C exhibits a moderate increase, and titanium dioxide shows reduced adhesion. Alumina demonstrates notable stability, with the conditioning film minimally impacting adhesion, which remains low.

Silicon Nitride Bioceramics Sintered by Microwave Exhibit Excellent Mechanical Properties, Cytocompatibility In Vitro, and Anti-Bacterial Properties

Silicon nitride is a bioceramic with great potential, and multiple studies have demonstrated its biocompatibility and antibacterial properties. In this study, silicon nitride was prepared by a microwave sintering technique that was different from common production methods. SEM and pore distribution analysis revealed the microstructure of microwave-sintered silicon nitride with obvious pores. Mechanical performance analysis shows that microwave sintering can improve the mechanical properties of silicon nitride. The CCK-8 method was used to demonstrate that microwave-sintered silicon nitride has no cytotoxicity and good cytocompatibility. From SEM and CLSM observations, it was observed that there was good adhesion and cross-linking of cells during microwave-sintered silicon nitride, and the morphology of the cytoskeleton was good. Microwave-sintered silicon nitride has been proven to be non-cytotoxic. In addition, the antibacterial ability of microwave-sintered silicon nitride against Staphylococcus aureus and Escherichia coli was tested, proving that it has a good antibacterial ability similar to the silicon nitride prepared by commonly used processes. Compared with silicon nitride prepared by gas pressure sintering technology, microwave-sintered silicon nitride has excellent performance in mechanical properties, cell compatibility, and antibacterial properties. This indicates its enormous potential as a substitute material for manufacturing bone implants.

Effect of DMPEI coating against biofilm formation on PVC catheter surface

Urinary tract infections (UTIs) are a significant cause of morbidity in healthcare systems and are prominently associated with applying urethral catheters, particularly in surgeries. Polyvinyl chloride (PVC) is extensively utilized in the fabrication of catheters. Biofilms, complex polymeric constructions, provide a protective milieu for cell multiplication and the enhancement of antibiotic resistance. Strategies to counteract biofilm development on medical apparatuses' surfaces incorporate antimicrobial agents such as N,N-dodecyl, and methyl polyethylenimine (DMPEI). This research endeavored to characterize the morphology of PVC and PVC-DMPEI surfaces utilizing Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) and to gauge hydrophobicity through contact angle measurements. Employing Escherichia coli, Staphylococcus aureus, and Candida albicans in adhesion assays enabled the assessment of DMPEI's efficacy in preventing microbial adherence to PVC. Butanol successfully solubilized 2 mg.mL-1 DMPEI without altering the PVC structure. SEM results substantiated the formation of a DMPEI layer on the PVC surface, which led to decreased surface roughness, as validated by AFM, and increased hydrophilicity, as demonstrated by contact angle evaluations. E. coli, S. aureus, and C. albicans exhibited significant adhesion reduction, 89.3%, 94.3%, and 86.6% on PVC-DMPEI surfaces. SEM visualizations confirmed reduced cellular colonization on PVC-DMPEI and highlighted considerable morphological modifications in E. coli. Consequently, DMPEI films effectively minimize the adhesion of E. coli, S. aureus, and C. albicans on PVC surfaces. DMPEI, with its potential as a protective coating for innovative medical devices, promises to inhibit biofilm adherence effectively.

Silver-releasing bioactive glass nanoparticles for infected tissue regeneration

Bacterial infections represent a formidable challenge, often leaving behind significant bone defects post-debridement and necessitating prolonged antibiotic treatments. The rise of antibiotic-resistant bacterial strains further complicates infection management. Bioactive glass nanoparticles have been presented as a promising substitute for bone defects and as carriers for therapeutic agents against microorganisms. Achieving consistent incorporation of ions into BGNs has proven challenging and restricted to a maximum ion concentration, especially when reducing the particle size. This study presents a notable achievement in the synthesis of 10 nm-sized Ag-doped bioactive glass nanoparticles (Ag-BGNs) using a modified yet straightforward Stöber method. The successful incorporation of essential elements, including P, Ca, Al, and Ag, into the glass structure at the intended concentrations (i.e., CaO wt% above 20 %) was confirmed by EDS, signifying a significant advancement in nanoscale biomaterial engineering. While exhibiting a spherical morphology and moderate dispersity, these nanoparticles tend to form submicron-sized aggregates outside of a solution state. The antibacterial effectiveness against MRSA was established across various experimental conditions, with Ag-BGNs effectively sterilizing planktonic bacteria without the need for antibiotics. Remarkably, when combined with oxacillin or fosfomycin, Ag-BGNs demonstrated a potent synergistic effect, restoring antibacterial capabilities against MRSA strains resistant to these antibiotics when used alone. Ag-BGNs exhibited potential in promoting human mesenchymal stromal cell proliferation, inducing the upregulation of osteoblast gene markers, and significantly contributing to bone regeneration in mice. This innovative synthesis protocol holds substantial promise for the development of biomaterials dedicated to the regeneration of infected tissue.

Black silicon spacing effect on bactericidal efficacy against gram-positive bacteria

The morphology of regular and uniform arrays of black silicon structures was evaluated for bactericidal efficacy against gram-positive, non-motileStaphylococcusepidermidis(S.epidermidis). In this study, uniform and regular arrays of black silicon structures were fabricated using nanosphere lithography and deep reactive ion etching. The effects of nanomorphology on bacterial killing were systematically evaluated using silicon nanostructures with pitches ranging from 300 to 1400 nm pitch on spherical cocci approximately 500 to 1000 nm in diameter. Our results show that nanostructure morphology factors such as height and roughness do not directly determine bactericidal efficacy. Instead, the spacing between nanostructures plays a crucial role in determining how bacteria are stretched and lysed. Nanostructures with smaller pitches are more effective at killing bacteria, and an 82 ± 3% enhancement in bactericidal efficacy was observed for 300 nm pitch nanoneedles surface compared to the flat control substrates.

Improving antibacterial ability of Ti-Cu thin films with co-sputtering method

Due to the resistance of some bacteria to antibiotics, research in the field of dealing with bacterial infections is necessary. A practical approach utilized in this study involves the preparation of an antibacterial thin film on the surfaces, which can effectively inhibit and reduce biofilm formation and bacterial adherence. In this study, we report the fabrication of bactericidal titanium (Ti) and copper (Cu) surfaces which involves a powerful co-sputtering method. This method provides a situation in which constituent elements are deposited simultaneously to control the composition of the thin film. Prepared samples were examined by energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), and contact angle measurements. To evaluate antibacterial behavior, we used two bacterial strains Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). Antibacterial activity of the prepared sample was assessed by determining the number of colony-forming units per milliliter (CFU/ml) using a standard viable cell count assay. Results indicated that as the Cu concentration increased, the nanoscale surfaces became rougher, with roughness values rising from 11.85 to 49.65 nm, and the contact angle increased from 40 to 80 degrees, indicating a hydrophilic character. These factors play a significant role in the antibacterial properties of the surface. The Ti-Cu films displayed superior antibacterial ability, with a 99.9% reduction (equivalent to a 5-log reduction) in bacterial viability after 2 h compared to Ti alone against both bacterial strains. Field emission scanning electron microscopy (FE-SEM) images verified that both E. coli and S. aureus cells were physically deformed and damaged the bacterial cell ultrastructure was observed. These findings highlight that adding Cu to Ti can improve the antibacterial ability of the surface while inhibiting bacterial adherence. Therefore, the Ti14-Cu86 sample with the highest percentage of Cu had the best bactericidal rate. Investigation of toxicity of Cu-Ti thin films was conducted the using the MTT assay, which revealed their biocompatibility and absence of cytotoxicity, further confirming their potential as promising biomaterials for various applications.

Study on the impact of photoaging on the generation of very small microplastics (MPs) and nanoplastics (NPs) and the wettability of plastic surface

Photoaging is one of the important reasons for the sharp increase of waste plastics, especially microplastics (MPs), in the environment. Therefore, studying the photoaging of plastics is of great significance for controlling plastic pollution from the source. Nevertheless, there are few studies on plastic photoaging from the perspective of polymer structure. Besides, the capacity of different types of plastics to generate MPs with small particle size is relatively little studied. In view of this, we conducted a preliminary study on the capacity of different types of plastics to generate MPs using flow cytometry. We also studied the impact of photoaging on different types of plastics. The results showed that flow cytometry can be used to quantify very small MPs (1-50 μm) and nanoplastics (NPs) (< 1 μm). Furthermore, photoaging often accelerates the generation of MPs and roughens plastic surface. Besides, photoaging can introduce some oxygen-containing groups onto plastic surface, thereby changing the wettability of plastic surface. Moreover, benzene rings in polymer structures may inhibit the generation of MPs but may promote the transformation of the plastic surface from hydrophobic to hydrophilic during photoaging. Although the changes in properties of plastics caused by photoaging have adverse effects on the environment, some new processes and materials still can be developed based on photoaging of plastics. This work contributes to a better understanding of the photoaging of plastics from the perspective of polymer structure, which has certain positive significance for controlling plastic pollution from the source.

Emerging evidence-based innovative approaches to control catheter-associated urinary tract infection: a review

Healthcare settings have dramatically advanced the latest medical devices, such as urinary catheters (UC) for infection, prevention, and control (IPC). The continuous or intermittent flow of a warm and conducive (urine) medium in the medical device, the urinary catheter, promotes the formation of biofilms and encrustations, thereby leading to the incidence of CAUTI. Additionally, the absence of an innate immune host response in and around the lumen of the catheter reduces microbial phagocytosis and drug action. Hence, the review comprehensively overviews the challenges posed by CAUTI and associated risks in patients' morbidity and mortality. Also, detailed, up-to-date information on the various strategies that blended/tailored the surface properties of UC to have anti-fouling, biocidal, and anti-adhesive properties to provide an outlook on how they can be better managed with futuristic solutions.

Bacterial Biofilm Formation on Biomaterials and Approaches to Its Treatment and Prevention

Bacterial biofilms can cause widespread infection. In addition to causing urinary tract infections and pulmonary infections in patients with cystic fibrosis, biofilms can help microorganisms adhere to the surfaces of various medical devices, causing biofilm-associated infections on the surfaces of biomaterials such as venous ducts, joint prostheses, mechanical heart valves, and catheters. Biofilms provide a protective barrier for bacteria and provide resistance to antimicrobial agents, which increases the morbidity and mortality of patients. This review summarizes biofilm formation processes and resistance mechanisms, as well as the main features of clinically persistent infections caused by biofilms. Considering the various infections caused by clinical medical devices, we introduce two main methods to prevent and treat biomaterial-related biofilm infection: antibacterial coatings and the surface modification of biomaterials. Antibacterial coatings depend on the covalent immobilization of antimicrobial agents on the coating surface and drug release to prevent and combat infection, while the surface modification of biomaterials affects the adhesion behavior of cells on the surfaces of implants and the subsequent biofilm formation process by altering the physical and chemical properties of the implant material surface. The advantages of each strategy in terms of their antibacterial effect, biocompatibility, limitations, and application prospects are analyzed, providing ideas and research directions for the development of novel biofilm infection strategies related to therapeutic materials.

Characterization of ready-to-eat fish surface as a potential source of contamination of Vibrio parahaemolyticus biofilms

The worldwide consumption of ready-to-eat seafood products has steadily increased due to a range of health benefits. However, depending on the handling or cutting process of raw fish, ready-to-eat sashimi can be exposed to microbiological risks that can lead to foodborne infection by marine pathogens. Since surface characteristics are key factors for microbial adhesion and biofilm formation, the present study aims to determine the correlation between raw fish skin properties and Vibrio parahaemolyticus biofilm formation. We analyzed V. parahaemolyticus biofilms (ATCC 17802; initially inoculated ca. 2 or 4 log CFU/cm²) on fish skin (gizzard shad, pomfret, red snapper, and mackerel; fish species served as sashimi without peeling the skin) formed under simulated marine environments (incubating in artificial seawater with rocking motion at 30 °C, the maximum temperature of seasonal seawater) for 24 h. The characteristics of fish skin were determined using confocal laser scanning microscopy/scanning electron microscopy. V. parahaemolyticus showed higher biofilm counts on fish skins than on stainless steel, which was used as a control (P < 0.05). In particular, V. parahaemolyticus formed biofilms with significantly higher levels of bacterial populations on gizzard shad and pomfret (ca. 5 log CFU/cm²; P < 0.05), highlighting the relationship between the biofilm formation level and the characteristics of gizzard shad and pomfret skins. The surface roughness of fish skins, including the main roughness parameters (Ra, Rq, and Rz), influenced the attachment of V. parahaemolyticus (P < 0.05). Additionally, images of V. parahaemolyticus biofilms suggested that different topographical profiles of fish species (e.g., mucus, unique structural features, etc.) could cause V. parahaemolyticus to exhibit different biofilm phenotypes, such as sticking to or entangling on the fish skin surface. The major findings of this study provide various phenotypic adhesions of V. parahaemolyticus to fish skin in considerations of the potential hazard for the consumption of ready-to-eat sashimi served with its skin.

Antimicrobial materials for endotracheal tubes: A review on the last two decades of technological progress

Ventilator-associated pneumonia (VAP) is an unresolved problem in nosocomial settings, remaining consistently associated with a lack of treatment, high mortality, and prolonged hospital stay. The endotracheal tube (ETT) is the major culprit for VAP development owing to its early surface microbial colonization and biofilm formation by multiple pathogens, both critical events for VAP pathogenesis and relapses. To combat this matter, gradual research on antimicrobial ETT surface coating/modification approaches has been made. This review provides an overview of the relevance and implications of the ETT bioburden for VAP pathogenesis and how technological research on antimicrobial materials for ETTs has evolved. Firstly, certain main VAP attributes (definition/categorization; outcomes; economic impact) were outlined, highlighting the issues in defining/diagnosing VAP that often difficult VAP early- and late-onset differentiation, and that generate misinterpretations in VAP surveillance and discrepant outcomes. The central role of the ETT microbial colonization and subsequent biofilm formation as fundamental contributors to VAP pathogenesis was then underscored, in parallel with the uncovering of the polymicrobial ecosystem of VAP-related infections. Secondly, the latest technological developments (reported since 2002) on materials able to endow the ETT surface with active antimicrobial and/or passive antifouling properties were annotated, being further subject to critical scrutiny concerning their potentialities and/or constraints in reducing ETT bioburden and the risk of VAP while retaining/improving the safety of use. Taking those gaps/challenges into consideration, we discussed potential avenues that may assist upcoming advances in the field to tackle VAP rampant rates and improve patient care. STATEMENT OF SIGNIFICANCE: The use of the endotracheal tube (ETT) in patients requiring mechanical ventilation is associated with the development of ventilator-associated pneumonia (VAP). Its rapid surface colonization and biofilm formation are critical events for VAP pathogenesis and relapses. This review provides a comprehensive overview on the relevance/implications of the ETT biofilm in VAP, and on how research on antimicrobial ETT surface coating/modification technology has evolved over the last two decades. Despite significant technological advances, the limited number of gathered reports (46), highlights difficulty in overcoming certain hurdles associated with VAP (e.g., persistent colonization/biofilm formation; mechanical ventilation duration; hospital length of stay; VAP occurrence), which makes this an evolving, complex, and challenging matter. Challenges and opportunities in the field are discussed.

Mini-Review of Biofilm Interactions with Surface Materials in Industrial Piping System

The growth of biofilm, which is caused by microorganism accumulation and growth on wetted surfaces, may damage industrial piping systems, increase maintenance and cleaning costs for the system sterilization, and even divulge the immune system into high risk. This article systematically analyzes the biofilm interactions with piping surface materials from the perspectives of physical convection, and biological and chemical adhesion. The thermodynamics of the flow, bacterial surface sensing, and bio-communication are the most critical factors for biofilm attachment. Furthermore, experimental analysis methods as well as biofilm control and removal approaches, are also included in this study. Finally, the resistance and growth of biofilm, as well as the practical and advanced methodology to control the biofilm and challenges associated with technology, are also discussed. Moreover, this paper may also offer a significant reference for the practice and strategic applications to address the biofilm resistance issues in industrial piping.

The plastisphere of biodegradable and conventional microplastics from residues exhibit distinct microbial structure, network and function in plastic-mulching farmland

The inhomogeneity of plastisphere and soil may result in different microbial communities, thus potentially affecting soil functions. Biodegradable plastics offer an alternative to conventional plastics, nevertheless, the inadequate end-of-life treatment of biodegradable plastics may release more microplastics. Herein, we collected PE and PBAT/PLA microplastics in plastic-mulching farmland in Hebei, China. The bacterial communities of soil, PE and PBAT/PLA plastisphere were investigated using 16 S high-throughput sequencing. We found that the structure of bacterial communities in PBAT/PLA plastisphere were significantly distinct from PE plastisphere and soil. The alpha diversities in PBAT/PLA plastisphere were significantly lower than PE plastisphere and soil. Statistical analysis of differentially ASVs suggested that PBAT/PLA microplastics act as a filter, enriching taxa with the capability to degrade plastic polymers such as Proteobacteria and Actinobacteria. Compared to PE plastisphere, PBAT/PLA plastisphere has networks of less complexity, lower modularity, and more competitive interactions. Predicted metabolic pathways involved in human diseases, carbohydrate metabolism, amino acid metabolism, and xenobiotic biodegradation and metabolism were promoted in PBAT/PLA plastisphere, along with the facilitation in abundance of genes associated with carbon and nitrogen cycling. Our results highlighted the uniqueness of plastisphere of biodegradable microplastics from conventional microplastics and their potential impact on soil functions.

Effects and interactions of metal oxides in microparticle-enhanced cultivation of filamentous microorganisms

Filamentous microorganisms are used as molecular factories in industrial biotechnology. In 2007, a new approach to improve productivity in submerged cultivation was introduced: microparticle-enhanced cultivation (MPEC). Since then, numerous studies have investigated the influence of microparticles on the cultivation. Most studies considered MPEC a morphology engineering approach, in which altered morphology results in increased productivity. But sometimes similar morphological changes lead to decreased productivity, suggesting that this hypothesis is not a sufficient explanation for the effects of microparticles. Effects of surface chemistry on particles were paid little attention, as particles were often considered chemically-inert and bioinert. However, metal oxide particles strongly interact with their environment. This review links morphological, physical, and chemical properties of microparticles with effects on culture broth, filamentous morphology, and molecular biology. More precisely, surface chemistry effects of metal oxide particles lead to ion leaching, adsorption of enzymes, and generation of reactive oxygen species. Therefore, microparticles interfere with gene regulation, metabolism, and activity of enzymes. To enhance the understanding of microparticle-based morphology engineering, further interactions between particles and cells are elaborated. The presented description of phenomena occurring in MPEC eases the targeted choice of microparticles, and thus, contributes to improving the productivity of microbial cultivation technology.

Antibacterial nanopatterned coatings for dental implants

Dental implants, usually made of titanium, are exposed to hostile oral microflora that facilitate bacterial infections and subsequent inflammation. To mitigate these processes, we coated titanium substrates with block copolymer nanopatterns and investigated the bactericidal effect of these coatings against Gram-positive and Gram-negative bacteria. We found that the bactericidal efficacy of the coatings depends on their morphology and surface chemistry as well as on the bacterial strain: an optimal combination can lead to significant bacterial death for a short time, i.e. 90% for 90 min. Human gingival fibroblasts in contact with the nanopatterned coatings showed similar cell attachment and morphology as on bare Ti. Immunostaining assays showed similar levels of CCR7 and CD206 in macrophages cultured over the nanopatterns and bare Ti, demonstrating adequate properties for tissue integration. The nanopatterns induced a small increase in macrophage aspect ratio, which might indicate early states of M2 polarization, given the absence of CD206.

Slower antibiotics degradation and higher resistance genes enrichment in plastisphere

Microplastics (MPs) are increasingly entering the urban aquatic ecosystems, and the environmental significance and health risks of plastisphere, a special biofilm on MPs, have received widespread attention. In this study, MPs of polylactic acid (PLA) and polyvinyl chloride (PVC) and quartzite were incubated in an urban water environment, and the tetracycline (TC) degradation ability was compared. Approximatedly 24% of TC biodegraded in 28 d in the water-quartzite system, which is significantly higher than that in the water-PLA (17.3%) and water-PVC systems (16.7%). Re-incubation of microorganisms in biofilms affirmed that quartzite biofilm has a higher TC degradation capacity than the plastisphere. According to high-throughput sequencing of 16S rRNA and metagenomic analysis, quartzite biofilm contained more abundant potential TC degrading bacteria, genes related to TC degradation (eutG, aceE, and DLAT), and metabolic pathways related to TC degradation. An oligotrophic environment on the quartzite surface might lead to the higher metabolic capacity of quartzite biofilm for unconventional carbons, e.g., TC. It is also found that, compared with quartzite biofilm, the distinct microbes in the plastisphere carried more antibiotic resistance genes (ARGs). Higher affinity of MPs surface to antibiotics may lead to higher antibiotics stress on the plastisphere, which further amplify the carrying capacity for ARGs of microorganisms in the plastisphere. Compared to the nondegradable PVC MPs, surface of the biodegradable PLA plastics harbored significantly higher amounts of biomass and ARGs. Compared to the mineral particles, the capability of plastisphere has lower ability to degrade unconventional carbon sources such as the refractory organic pollutants, due to the abundance of carbon sources (adsorbed organic carbon and endogenous organic carbon) on the MPs surface. Meanwhile, the stronger adsorption capacity for pollutants also leads to higher pollutant stress (such as antibiotic stress) in plastisphere, which in turn affects the microbiological characteristics of the plastisphere itself, such as carrying more ARGs.

Lubricant skin on diverse biomaterials with complex shapes via polydopamine-mediated surface functionalization for biomedical applications

Implantable biomedical devices require an anti-biofouling, mechanically robust, low friction surface for a prolonged lifespan and improved performance. However, there exist no methods that could provide uniform and effective coatings for medical devices with complex shapes and materials to prevent immune-related side effects and thrombosis when they encounter biological tissues. Here, we report a lubricant skin (L-skin), a coating method based on the application of thin layers of bio-adhesive and lubricant-swellable perfluoropolymer that impart anti-biofouling, frictionless, robust, and heat-mediated self-healing properties. We demonstrate biocompatible, mechanically robust, and sterilization-safe L-skin in applications of bioprinting, microfluidics, catheter, and long and narrow medical tubing. We envision that diverse applications of L-skin improve device longevity, as well as anti-biofouling attributes in biomedical devices with complex shapes and material compositions.

Silicon Nitride as a Biomedical Material: An Overview

Silicon nitride possesses a variety of excellent properties that can be specifically designed and manufactured for different medical applications. On the one hand, silicon nitride is known to have good mechanical properties, such as high strength and fracture toughness. On the other hand, the uniqueness of the osteogenic/antibacterial dualism of silicon nitride makes it a favorable bioceramic for implants. The surface of silicon nitride can simultaneously inhibit the proliferation of bacteria while supporting the physiological activities of eukaryotic cells and promoting the healing of bone tissue. There are hardly any biomaterials that possess all these properties concurrently. Although silicon nitride has been intensively studied as a biomedical material for years, there is a paucity of comprehensive data on its properties and medical applications. To provide a comprehensive understanding of this potential cornerstone material of the medical field, this review presents scientific and technical data on silicon nitride, including its mechanical properties, osteogenic behavior, and antibacterial capabilities. In addition, this paper highlights the current and potential medical use of silicon nitride and explains the bottlenecks that need to be addressed, as well as possible solutions.

Differences in the Plastispheres of Biodegradable and Non-biodegradable Plastics: A Mini Review

There has been a steady rise in the production and disposal of biodegradable plastics. Unlike the microorganisms present in the biofilms on non-biodegradable plastic surfaces (the “plastisphere”), the plastisphere of biodegradable plastic has not been well-characterized. As the polymer structure of biodegradable plastic has a higher microbial affinity than that of non-biodegradable plastic, their plastispheres are assumed to be different. This review summarizes the reported differences in microbial communities on the surface of biodegradable and non-biodegradable plastics, discusses the driving forces behind these differences, and discusses the potential environmental risks. Overall, the plastisphere biomass on the surface of non-biodegradable plastic was observed to be lower than that of biodegradable plastic. The community structure of microbes in both plastispheres was diverse, mainly due to the properties of the plastic surface, such as surface charge, hydrophilicity/hydrophobicity, roughness, and bioavailability of polymer components for microbes. Further research should focus on developing biodegradable plastic that degrade faster in the environment, revealing the mechanism of enrichment of ARGs and potential pathogens on plastics, and understanding the potential influence of plastispheres on the evolution and selection of plastic-degrading microbial potential.

Engineering bacterial surface interactions using DNA as a programmable material

The diverse surface interactions and functions of a bacterium play an important role in cell signaling, host infection, and colony formation. To understand and synthetically control the biological functions of individual cells as well as the whole community, there is growing attention on the development of chemical and biological tools that can integrate artificial functional motifs onto the bacterial surface to replace the native interactions, enabling a variety of applications in biosynthesis, environmental protection, and human health. Among all these functional motifs, DNA emerges as a powerful tool that can precisely control bacterial interactions at the bio-interface due to its programmability and biorecognition properties. Compared with conventional chemical and genetic approaches, the sequence-specific Watson-Crick interaction enables almost unlimited programmability in DNA nanostructures, realizing one base-pair spatial control and bio-responsive properties. This highlight aims to provide an overview on this emerging research topic of DNA-engineered bacterial interactions from the aspect of synthetic chemists. We start with the introduction of native bacterial surface ligands and established synthetic approaches to install artificial ligands, including direct modification, metabolic engineering, and genetic engineering. A brief overview of DNA nanotechnology, reported DNA-bacteria conjugation chemistries, and several examples of DNA-engineered bacteria are included in this highlight. The future perspectives and challenges in this field are also discussed, including the development of dynamic bacterial surface chemistry, assembly of programmable multicellular community, and realization of bacteria-based theranostic agents and synthetic microbiota as long-term goals.

Eucalyptol/ β-cyclodextrin inclusion complex loaded gellan/PVA nanofibers as antifungal drug delivery system

Fungal infections pose a serious threat to humankind due to the toxicity of conventional antifungal therapy and continuous emerging incidence of multidrug resistance. Essential oils fascinated researchers because of their broad antimicrobial activity and minimal cytotoxicity. However, hydrophobic, volatile and low water solubility of essential oils hinder their applications in pharmaceutical industries. Therefore, in this study we have loaded eucalyptol/ β-cyclodextrin inclusion complex to gellan/polyvinyl alcohol nanofibers (EPNF) to eradicate Candida albicans and Candida glabrata biofilms. The electrospun nanofibers characterized by various physicochemical techniques and it was observed that EPNF possess highly hydrophilic surface property that facilitate rapid drug release. EPNF inhibited approximately 70% biofilm of C. albicans and C. glabrata. Time kill results depicted that eucalyptol (EPTL) encapsulation in the nanofibers prolonged its antifungal activity than the pure EPTL. Electron microscopy studies revealed that EPNF disrupted the cell surface of Candida. Collectively the current study suggested nanofiber encapsulation enhanced antibiofilm activity of eucalyptol and these nanoscale systems can serve as an alternative therapeutic strategy to treat fungal infections. Further, the developed nanofibrous materials can be applied as cost effective coating agent for biomedical implants.

ADVANCES IN TECHNIQUES AND APPLICATIONS OF RUBBER SURFACE GRAFTING MODIFICATION

To meet the requirement in the application of medical devices, composites, biomaterials, corrosion resistance, and selective adsorptions, rubber surface modification is usually indispensable. Grafting treatment is one of most significate treatment methods. In this paper, we focus on rubber surface grafting modification, including grafting techniques and applications. Different grafting methods—including monomer grafting polymerization and coupling reaction—are covered and compared briefly. The related applications of surface grafting modification techniques, such as improving compatibility of waste rubber as fillers, hydrophobicity and lipophilicity of sponge rubber for oil–water separation, biocompatibility of rubber in the medical field, and forming surface patterns, are demonstrated in detail. The new research directions of surface grafting techniques as well as main challenges in application are also discussed.

Probing Antimicrobial Halloysite/Biopolymer Composites with Electron Microscopy: Advantages and Limitations

Halloysite is a tubular clay nanomaterial of the kaolin group with a characteristic feature of oppositely charged outer and inner surfaces, allowing its selective spatial modification. The natural origin and specific properties of halloysite make it a potent material for inclusion in biopolymer composites with polysaccharides, nucleic acids and proteins. The applications of halloysite/biopolymer composites range from drug delivery and tissue engineering to food packaging and the creation of stable enzyme-based catalysts. Another important application field for the halloysite complexes with biopolymers is surface coatings resistant to formation of microbial biofilms (elaborated communities of various microorganisms attached to biotic or abiotic surfaces and embedded in an extracellular polymeric matrix). Within biofilms, the microorganisms are protected from the action of antibiotics, engendering the problem of hard-to-treat recurrent infectious diseases. The clay/biopolymer composites can be characterized by a number of methods, including dynamic light scattering, thermo gravimetric analysis, Fourier-transform infrared spectroscopy as well as a range of microscopic techniques. However, most of the above methods provide general information about a bulk sample. In contrast, the combination of electron microscopy with energy-dispersive X-ray spectroscopy allows assessment of the appearance and composition of biopolymeric coatings on individual nanotubes or the distribution of the nanotubes in biopolymeric matrices. In this review, recent contributions of electron microscopy to the studies of halloysite/biopolymer composites are reviewed along with the challenges and perspectives in the field.

Factors Involved in the onset of infection following bacterially contaminated platelet transfusions

Transfusion of platelet concentrates (PCs) is associated with several adverse patient reactions, the most common of which are febrile non-hemolytic transfusion reactions (FNHTRs) and transfusion-associated bacterial-infection/transfusion-associated sepsis (T-ABI/TA-S). Diagnosis of T-ABI/T-AS requires a positive blood culture (BC) result from the transfusion recipient and also a positive identification of bacterial contamination within a test aliquot of the transfused PC. In a significant number of cases, clinical symptoms post-transfusion are reported by the clinician, yet the BCs from the patient and/or PC are negative. The topic of 'missed bacterial detection' has therefore been the focus of several primary research studies and review articles, suggesting that biofilm formation in the blood bag and the presence of viable but non-culturable (VBNC) pathogens are the major causes of this missed detection. However, platelets are emerging as key players in early host responses to infection and as such, the aforementioned biofilm formation could elicit 'platelet priming', which could lead to significant immunological reactions in the host, in the absence of planktonic bacteria in the host bloodstream. This review reflects on what is known about missed detection and relates this to the emerging understanding of the effect of bacterial contamination on the platelets themselves and the significant role played by platelets in exacerbation of an immune response to infection within the transfusion setting.

Surface activation of medical grade polyurethane for the covalent immobilization of an anti-adhesive biopolymeric coating

Hospital-acquired infections are still a major concern worldwide, being frequently related to bacterial biofilm formation on medical devices, and thus difficult to eradicate with conventional antimicrobial treatments. Therefore, infection-preventive solutions based on natural polymers are being investigated. Recently, a marine cyanobacterium-derived polymeric coating (CyanoCoating) has demonstrated great anti-adhesive potential when immobilized onto gold model substrates. In this work, we took this technology a step closer to an industrial application by covalently immobilizing CyanoCoating onto medical grade polyurethane (PU). This immobilization was developed through the introduction of linkable moieties onto a PU inert surface using different pre-treatments. Besides the application of the polydopamine (pDA) linker layer, other processes frequently found in industrial settings, such as atmospheric plasma (using O2 or N2 as reactive gases) and ozone surface activations, were evaluated. From all the pre-treatments tested, the ozone activation was the most promising since the obtained coating not only revealed a homogeneous distribution, but also significantly reduced the adhesion of two relevant etiological bacteria in static conditions (the Gram-positive Staphylococcus aureus and the Gram-negative Escherichia coli). Moreover, it also impaired E. coli biofilm formation under simulated urinary tract dynamic conditions, reinforcing the potential of CyanoCoating as an antibiotic-free alternative to mitigate medical device-associated infections, particularly in the urinary tract.

Biofilm inhibition and bactericidal activity of NiTi alloy coated with graphene oxide/silver nanoparticles via electrophoretic deposition

Biofilm formation on medical devices can induce complications. Graphene oxide/silver nanoparticles (GO/AgNPs) coated nickel-titanium (NiTi) alloy has been successfully produced. Therefore, the aim of this study was to determine the anti-bacterial and anti-biofilm effects of a GO/AgNPs coated NiTi alloy prepared by Electrophoretic deposition (EPD). GO/AgNPs were coated on NiTi alloy using various coating times. The surface characteristics of the coated NiTi alloy substrates were investigated and its anti-biofilm and anti-bacterial effect on Streptococcus mutans biofilm were determined by measuring the biofilm mass and the number of viable cells using a crystal violet assay and colony counting assay, respectively. The results showed that although the surface roughness increased in a coating time-dependent manner, there was no positive correlation between the surface roughness and the total biofilm mass. However, increased GO/AgNPs deposition produced by the increased coating time significantly reduced the number of viable bacteria in the biofilm (p < 0.05). Therefore, the GO/AgNPs on NiTi alloy have an antibacterial effect on the S. mutans biofilm. However, the increased surface roughness does not influence total biofilm mass formation (p = 0.993). Modifying the NiTi alloy surface using GO/AgNPs can be a promising coating to reduce the consequences of biofilm formation.

An aqueous-based process to bioactivate poly(ε-caprolactone)/mesoporous bioglass composite surfaces by prebiotic chemistry-inspired polymer coatings for biomedical applications

Despite the wide use of aliphatic polyesters, such as poly(L-lactic acid) (PLLA) and poly(ε-caprolactone) (PCL), for many biomedical applications, these materials are limited due to their hydrophobic properties and lack of functional groups to bond with ligands to enhance the cell reorganization. Recently, a composite consisting of bioglass and PCL was demonstrated to enhance the mechanical strength and to improve the degradation rate. Although numerous approaches have been developed to improve the wettability of aliphatic polyesters to create a favorable interface with cells, only few surface modification methods can be independently applied to surfaces with different material. In this work, mesoporous bioglass (MBG) nanoparticles embedded in PCL films were modified by the polymerization of aminomalonitrile (AMN) with 3,4,5-trihydroxybenzaldehyde (THBA). The copolymer layer was further utilized as a mediator to conjugate chitosan and evaluate the antibacterial efficacy. Our results show that the hydrophilicity of the composite membranes significantly improved after treatment. In addition, after immersion in simulated body fluid (SBF) for 14 days, hydroxyapatite formation was only observed on the treated membranes. This result demonstrates that the surface treatment did not alter the MBG bioactivity. Moreover, the cell culture results reveal that the extension level of cells and expression of alkaline phosphatase activity (ALP) of osteoblast-like (MG63) cells were higher on treated composite films compared to untreated ones. The results imply that the treatment procedure can be simultaneously and homogeneously applied to the organic/inorganic composites. In addition, Staphylococcus aureus adhesion on AMN-co-THBA and chitosan/ AMN-co-THBA was significantly lower than untreated PCL. Moreover, the percentage of dead bacteria was highest on the chitosan/ AMN-co-THBA membranes. These results indicate that the AMN-co-THBA modification can be used in composite materials and complex constructs, and it provides a potential method to create versatile surface properties for biomedical applications.

The Vaginal Microbiota, Bacterial Biofilms and Polymeric Drug-Releasing Vaginal Rings

The diversity and dynamics of the microbial species populating the human vagina are increasingly understood to play a pivotal role in vaginal health. However, our knowledge about the potential interactions between the vaginal microbiota and vaginally administered drug delivery systems is still rather limited. Several drug-releasing vaginal ring products are currently marketed for hormonal contraception and estrogen replacement therapy, and many others are in preclinical and clinical development for these and other clinical indications. As with all implantable polymeric devices, drug-releasing vaginal rings are subject to surface bacterial adherence and biofilm formation, mostly associated with endogenous microorganisms present in the vagina. Despite more than 50 years since the vaginal ring concept was first described, there has been only limited study and reporting around bacterial adherence and biofilm formation on rings. With increasing interest in the vaginal microbiome and vaginal ring technology, this timely review article provides an overview of: (i) the vaginal microbiota, (ii) biofilm formation in the human vagina and its potential role in vaginal dysbiosis, (iii) mechanistic aspects of biofilm formation on polymeric surfaces, (iv) polymeric materials used in the manufacture of vaginal rings, (v) surface morphology characteristics of rings, (vi) biomass accumulation and biofilm formation on vaginal rings, and (vii) regulatory considerations.

Favorable Antibacterial, Antibiofilm, Antiadhesion to Cells, and Biocompatible Polyurethane by Facile Surface Functionalization

It is of paramount importance to prohibit biofilm formation in a wide range of implant devices, such as thermoplastic polyurethane (PU)-based catheters. It is possible only by means of a multifunctional material that provides fast and effective antibacterial activity, proper biocompatibility, and low bacterial and cell adhesion. In this paper, a facile chemistry approach has been developed to modify biomedical-grade PU with PU species, containing reactive uretdione functional groups for functionalization with the contact-type polyguanidine bactericidal agent and oxidized dextran as an antifouling polymer without sacrificing the thermal and mechanical properties. The resulting PU possesses broad-spectrum contact-active antibacterial activity against Gram-negative and Gram-positive bacteria with fast kinetics. The excellent antifouling capacity was confirmed by low nonspecific protein adsorption and reduced adhesion of fibroblast cells by ≥ 90%. In addition to antiadhesive and antibiofilm properties, high cell viability (>90%) and low hemolysis rate (HR < 1%) verified favorable cytocompatibility. Hence, the strategy followed to functionalize PUs in this paper might be considered to modify PU-based biomedical devices.

Tuning surface topographies on biomaterials to control bacterial infection

Microbial contamination and subsequent formation of biofilms frequently cause failure of surgical implants and a good understanding of the bacteria-surface interactions is vital to the design and safety of biomaterials. In this review, the physical and chemical factors that are involved in the various stages of implant-associated bacterial infection are described. In particular, topographical modification strategies that have been employed to mitigate bacterial adhesion via topographical mechanisms are summarized and discussed comprehensively. Recent advances have improved our understanding about bacteria-surface interactions and have enabled biomedical engineers and researchers to develop better and more effective antibacterial surfaces. The related interdisciplinary efforts are expected to continue in the quest for next-generation medical devices to attain the ultimate goal of improved clinical outcomes and reduced number of revision surgeries.

Biological and Physiochemical Methods of Biofilm Adhesion Resistance Control of Medical-Context Surface

The formation of biofilms on medical-context surfaces gives the EPS embedded bacterial community protection and additional advantages that planktonic cells would not have such as increased antibiotic resistance and horizontal gene transfer. Bacterial cells tend to attach to a conditioning layer after overcoming possible electrical barriers and go through two phases of attachments: reversible and irreversible. In the first, bacterial attachment to the surface is reversible and occurs quickly whilst the latter is permanent and takes place over a longer period of time. Upon reaching a certain density in the bacterial community, quorum sensing causes phenotypical changes leading to a loss in motility and the production of EPS. This position paper seeks to address the problem of bacterial adhesion and biofilm formation for the medical surfaces by comparing inhabiting physicochemical interactions and biological mechanisms. Several physiochemical methodologies (e.g. ultrasonication, alternating magnetic field and chemical surface coating) and utilizing biological mechanisms (e.g. quorum quenching and EPS degrading enzymes) were suggested. The possible strategical applications of each category were suggested and evaluated to a balanced position to possibly eliminate the adhesion and formation of biofilms on medical-context surfaces.

Potential of Superhydrophobic Surface for Blood-Contacting Medical Devices

Medical devices are indispensable in the healthcare setting, ranging from diagnostic tools to therapeutic instruments, and even supporting equipment. However, these medical devices may be associated with life-threatening complications when exposed to blood. To date, medical device-related infections have been a major drawback causing high mortality. Device-induced hemolysis, albeit often neglected, results in negative impacts, including thrombotic events. Various strategies have been approached to overcome these issues, but the outcomes are yet to be considered as successful. Recently, superhydrophobic materials or coatings have been brought to attention in various fields. Superhydrophobic surfaces are proposed to be ideal blood-compatible biomaterials attributed to their beneficial characteristics. Reports have substantiated the blood repellence of a superhydrophobic surface, which helps to prevent damage on blood cells upon cell-surface interaction, thereby alleviating subsequent complications. The anti-biofouling effect of superhydrophobic surfaces is also desired in medical devices as it resists the adhesion of organic substances, such as blood cells and microorganisms. In this review, we will focus on the discussion about the potential contribution of superhydrophobic surfaces on enhancing the hemocompatibility of blood-contacting medical devices.

The Role of Biofilm in Central Venous Catheter Related Bloodstream Infections: Evidence-based Nursing and Review of the Literature

BACKGROUND

Biofilm is a fundamental component in the pathogenesis of infections related to the use of the central venous catheter (CVC,) which can represent an important health issue in everyday practice of nursing and medical staff.

OBJECTIVE

The objective of the following review is to analyze the components of biofilm and their role in catheter-related infection determinism in an evidencebased nursing perspective in such a way as to give health professionals useful suggestions in the prevention and management of these complications.

METHODS

The following databases were consulted for the bibliographic search: Medline, Scopus, Science Direct. Biofilm can be the cause of CVC extraction and can lead to serious haematogenic infectious complications that can increase the morbidity and mortality of affected patients.

RESULTS

Updated pathophysiologic knowledge of biofilm formation and appropriate diagnostic methodology are pivotal in understanding and detecting CVC-related infections. Lock therapy appears to be a useful, preventive, and therapeutic aid in the management of CVCrelated infections. New therapies attempting to stop bacterial adhesion on the materials used could represent new frontiers for the prevention of CVC-related infections.

CONCLUSION

The correct evidence-based nursing methods, based on the use of guidelines, provides the opportunity to minimize the risks of infection through the implementation of a series of preventive measures both during the CVC positioning phase and in the subsequent phase, for example, during device management which is performed by medical and nursing staff.

Development of Polythiourethane/ZnO-Based Anti-Fouling Materials and Evaluation of the Adhesion of Staphylococcus aureus and Candida glabrata Using Single-Cell Force Spectroscopy

The attachment of bacteria and other microbes to natural and artificial surfaces leads to the development of biofilms, which can further cause nosocomial infections. Thus, an important field of research is the development of new materials capable of preventing the initial adhesion of pathogenic microorganisms. In this work, novel polymer/particle composite materials, based on a polythiourethane (PTU) matrix and either spherical (s-ZnO) or tetrapodal (t-ZnO) shaped ZnO fillers, were developed and characterized with respect to their mechanical, chemical and surface properties. To then evaluate their potential as anti-fouling surfaces, the adhesion of two different pathogenic microorganism species, Staphylococcus aureus and Candida glabrata, was studied using atomic force microscopy (AFM). Our results show that the adhesion of both S. aureus and C. glabrata to PTU and PTU/ZnO is decreased compared to a model surface polydimethylsiloxane (PDMS). It was furthermore found that the amount of both s-ZnO and t-ZnO filler had a direct influence on the adhesion of S. aureus, as increasing amounts of ZnO particles resulted in reduced adhesion of the cells. For both microorganisms, material composites with 5 wt.% of t-ZnO particles showed the greatest potential for anti-fouling with significantly decreased adhesion of cells. Altogether, both pathogens exhibit a reduced capacity to adhere to the newly developed nanomaterials used in this study, thus showing their potential for bio-medical applications.

Silver nanoparticles: synthesis, characterisation and biomedical applications

Nanotechnology is a rapidly growing field due to its unique functionality and a wide range of applications. Nanomedicine explores the possibilities of applying the knowledge and tools of nanotechnology for the prevention, treatment, diagnosis and control of disease. In this regard, silver nanoparticles with diameters ranging from 1 to 100 nm are considered most important due to their unique properties, ability to form diverse nanostructures, their extraordinary range of bactericidal and anticancer properties, wound healing and other therapeutic abilities and their cost-effectiveness in production. The current paper reviews various types of physical, chemical and biological methods used in the production of silver nanoparticles. It also describes approaches employing silver nanoparticles as antimicrobial and antibiofilm agents, as antitumour agents, in dentistry and dental implants, as promoters of bone healing, in cardiovascular implants and as promoters of wound healing. The paper also explores the mechanism of action, synthesis methods and morphological characterisation of silver nanoparticles to examine their role in medical treatments and disease management.

Development of tantalum with highly hydrophilic surface and antimicrobial properties obtained by micro-arc oxidation process

Tantalum (Ta) and its application in biomaterials has been attracting more and more attention recently. It can be considered as a material for hard tissue implants. This study focuses on antimicrobial and surface characterization of micro-arc oxidized (MAO) nanocrystalline Ta compared with its microcrystalline equivalent. For the purposes of the investigation, x-ray diffractometry (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), wetting analysis, optical profilometry, corrosion resistance measurement, and antimicrobial tests were performed. Nanocrystalline Ta was fabricated using high-energy ball milling (HEBM) and pulse plasma sintering (PPS). The MAO process done at 250 V results in the formation of a porous oxide surface. An XRD analysis confirmed the presence of a Ta₂ O₅ oxide layer. Based on the SEM pictures, the obtained oxide layer was approximately 3-4 μm thick for nanocrystalline Ta substrate. For microcrystalline Ta, the oxide layer was thinner, in the range of 0.3-0.6 μm. The analysis of polarization curves showed a significant improvement of corrosion resistance for MAO nanocrystalline Ta (2.62 × 10^-8 A/cm² ) versus not oxidized nanocrystalline Ta (1.20 × 10^-5 A/cm² ). The surface roughness of MAO nanocrystalline Ta proved to be several times higher than that of unoxidized Ta. Wetting analysis showed that the oxide layer on the nanocrystalline substrate is hydrophilic. This research provides detailed information about MAO microcrystalline and MAO nanocrystalline Ta antimicrobial activity against Staphylococcus aureus and Pseudomonas aeruginosa. A significant decrease of S. aureus for MAO nanocrystalline Ta (control 10,435 ± 981 vs. sample 3,453 ± 130) was noticed. No significant difference was noticed for MAO microcrystalline and nanocrystalline Ta tested for P. aeruginosa.

The Influence of Surface Topography and Wettability on Escherichia coli Removal from Polymeric Materials in the Presence of a Blood Conditioning Film

The reduction of biofouling and the reduction of cross-contamination in the food industry are important aspects of safety management systems. Polymeric surfaces are used extensively throughout the food production industry and therefore ensuring that effective cleaning regimes are conducted is vital. Throughout this study, the influence of the surface characteristics of three different polymeric surfaces, polytetrafluoroethylene (PTFE), poly(methyl methacrylate) (PMMA) and polyethylene terephthalate (PET), on the removal of Escherichia coli using a wipe clean method utilising 3% sodium hypochlorite was determined. The PTFE surfaces were the roughest and demonstrated the least wettable surface (118.8°), followed by the PMMA (75.2°) and PET surfaces (53.9°). Following cleaning with a 3% sodium hypochlorite solution, bacteria were completely removed from the PTFE surfaces, whilst the PMMA and PET surfaces still had high numbers of bacteria recovered (1.2 × 107 CFU/mL and 6.3 × 107 CFU/mL, respectively). When bacterial suspensions were applied to the surfaces in the presence of a blood conditioning film, cleaning with sodium hypochlorite demonstrated that no bacteria were recovered from the PMMA surface. However, on both the PTFE and PET surfaces, bacteria were recovered at lower concentrations (2.0 × 102 CFU/mL and 1.3 × 103 CFU/mL, respectively). ATP bioluminescence results demonstrated significantly different ATP concentrations on the surfaces when soiled (PTFE: 132 relative light units (RLU), PMMA: 80 RLU and PET: 99 RLU). Following cleaning, both in the presence and absence of a blood conditioning film, all the surfaces were considered clean, producing ATP concentrations in the range of 0-2 RLU. The results generated in this study demonstrated that the presence of a blood conditioning film significantly altered the removal of bacteria from the polymeric surfaces following a standard cleaning regime. Conditioning films which represent the environment where the surface is intended to be used should be a vital part of the test regime to ensure an effective disinfection process.