Allyl functionalized UiO-66 metal-organic framework as a catalyst for the synthesis of cyclic carbonates by CO2 cycloaddition

Synthesis of highly sensitive and multi-response Eu-MOF, fluorescence sensing properties and anti-counterfeiting applications

A new Europium metal-organic framework (Eu-MOF), namely [Eu(dpa) (H2O)]·0.5(bpy)·4H2O}n (H4dpa = 5-(3,4-dicarboxyphenoxy) isophenic acid, bpy = protonated 4,4'-bipyridine) was synthesized and structurally characterized by elemental analyses, infrared spectroscopy, and X-ray single-crystal diffraction analyses. Eu-MOF shows a three-dimensional network structure based on EuIII ions and (dpa)4- ligands via µ4: η1, η2, η2, η2 coordination mode. Fluorescence analysis shows that Eu-MOF has excellent fluorescence sensing characteristics, which can efficiently and sensitively detect various pollutants in water: the limit of detection (LOD) of ratiometric fluorescence detection of ANI in water was 42.9 nM, which was better than the single-peak detection limit. In addition, the peak detection limits of Eu-MOF for Flu, ORN and NB were 120 nM, 27 nM and 94 nM, respectively. In addition, XPS, LUMO orbital energy level, fluorescence lifetime, ultraviolet absorption and other principles are used to explore the mechanism of fluorescence quenching. Surprisingly, Eu-MOF not only has excellent anti- counterfeiting ability and stability, can be used as anti-counterfeiting material in life, but also has good selectivity to Flu. Eu-MOF has obvious fluorescence quenching effect on Flu on paper under ultraviolet light, which can be used for rapid in situ imaging test paper of pesticide residues.

MIL-88-NH2(Fe) conjugated pectin through a post-modification Ugi four-component reaction: A robust bio-based catalyst for the synthesis of cyclic carbonate via CO2 fixation reaction

The functionalization of materials via multicomponent reactions (MCRs) led to a recent surge in the interest of researchers, owing to the creation of exceptional properties in materials. Herein, a novel robust porous catalyst was prepared via the conjugation of MIL-88-NH2(Fe) and pectin (DAP/MIL-88-NH2(Fe)) through the post-modification Ugi four-component reaction (Ugi-4CR) for the first time. To achieve this aim, pectin was oxidized using sodium periodate as an oxidant agent to produce dialdehyde pectin (DAP). Next, the generated carbonyl functional groups participated in the Ugi-4CR of MIL-88-NH2(Fe), 4-methyl carboxylic acid, and cyclohexyl (c-hex) isocyanide to produce DAP/MIL-88-NH2(Fe) catalyst. The catalytic activity of the prepared bio-based catalyst was examined in producing cyclic carbonates through the chemical fixation of CO2 with epoxides in the presence of TBAB as a co-catalyst. Interestingly, catalytic experiments revealed that the prepared bio-based catalyst could be remarkably active regarding the CO2 fixation reaction and performed it in the shortest reaction time (1 h) via high CO2 adsorbent capacity. The outstanding benefits of the prepared bio-based catalyst include its non-hazardous nature, inexpensive, green and gentle reaction conditions, and ability to be reusable in several runs with slight loss of catalytic activity due to a more durable framework with high chemical and thermal stability.

Efficient internalization of nano architectured 177Lu-hyaluronic acid@ zirconium-based metal-organic framework for the treatment of neuroblastoma: Unravelling toxicity, stability, radiolabelling and bio-distribution

Zirconium-based metal-organic frameworks (UiO-66) have gained considerable attention owing to their versatile application. In the present research, UiO-66 was synthesized via a defect engineering approach, and its toxicity profile was explored. The synthesized nanomaterial was extensively characterized via spectroscopic methods such as FTIR and Raman spectroscopy, which confirmed the formation of the framework. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to determine the crystallinity, shape and size of the nanoformulations. Thermal gravimetric analysis, 1H NMR spectroscopy and Brunauer-Emmett-Teller (BET) surface area analysis were used to identify the differences between pristine and defective UiO-66. Furthermore, the synthesized MOF was exposed to various pH conditions, serum protein and DMEM. Drug loading and release studies were evaluated using 5-fluorouracil as a model anticancer drug. The synthesized MOFs were modified with hyaluronic acid via mussel-inspired polymerization to increase their uptake and stability. More importantly, the toxicity of the nanoformulation was investigated via various toxicity studies, such as hemolysis assays and cell viability assays, and was further supported by in vivo acute and subacute toxicity data obtained from Wistar rats. Radiolabelling and bio-distribution studies were also performed using 177Lu to explore the bio-distribution profile of UiO-66.

Waste polyethylene terephthalate plastic derived Zr-MOF for high performance supercapacitor applications

The chemical conversion of plastic waste into metal-organic framework (MOF) materials has emerged as a significant research field in addressing issues associated to the environment and the economy. The significant advantages of MOFs as electrode material for energy/supercapacitors arises from their extensive surface area and notable porosity. The present study involved the synthesis of Zirconium-Metal Organic Frameworks (Zr-MOF) by the solvothermal method, utilizing plastic waste in the form of Polyethylene terephthalate (PET) bottles. The morphological and structural characteristics of the Zr-MOF were inspected through several analytical techniques, including scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy analysis. The as prepared Zr-MOF demonstrated very high specific surface area of 927.567 m2 g-1 with mesoporous nature of the materials estimate by BJH method. The electrochemical characteristics of the Zr-MOF in 3-electrode system exhibited a notable specific capacitance of 822 F g-1 when subjected to a low scan rate of 2 mV S-1, while the specific capacitance estimated through galvanostatic charge-discharge exhibited an enhanced value of 890 F g-1 at a current density of 0.5 A g-1. Additionally, the working electrode composed of Zr-MOF demonstrated noteworthy capacitance retention of 92% after 5000 charge discharge cycles. This research presents novel opportunities for the utilization of waste PET bottles in fabrication of highly functional Zr-MOF, aiming to advance the development of next-generation supercapacitors and environmental remediation.

Diamine-modified porous indium frameworks with crystalline porous materials (CPM)-5 structure for carbon dioxide fixation under co-catalyst and solvent free conditions

In the present work, functional diamine groups into indium frameworks to synthesize cyclic carbonates from CO₂ and epoxides with efficient catalytic activity in the absence of co-catalyst and solvent are reported for the first time. Crystalline porous materials (CPM)-5 modified with 1,2-phenylene diamine and ethylene diamine (CPM-5-PhDA and CPM-5-EDA), were prepared using a post-synthetic modification (PSM) method. The properties of the modified CPM-5 were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), N₂-adsorption, scanning electron microscopy (SEM), CO₂ adsorption, and temperature programmed desorption TPD methods. The presence of diamine groups as basic sites and indium Lewis acid sites in the framework structure were desirable for high catalytic activity. For a given catalyst weight, CPM-5-PhDA was the best candidate to appear with great catalytic activity and selectivity for the cycloaddition reaction at 100°C and 1 MPa CO₂ under co-catalyst and solvent free conditions. CPM-5-PhDA also was found to afford large and bulky epoxides. The catalyst can be easily separated and reused five times without any decline in activity.

Functionalization of nitrogen-doped graphene quantum dot: A sustainable carbon-based catalyst for the production of cyclic carbonate from epoxide and CO2

A series of organic compounds were successfully immobilized on an N-doped graphene quantum dot (N-GQD) to prepare a multifunctional organocatalyst for coupling reaction between CO₂ and propylene oxide (PO). The simultaneous presence of halide ions in conjunction with acidic- and basic-functional groups on the surface of the nanoparticles makes them highly active for the production of propylene carbonate (PC). The effects of variables such as catalyst loading, reaction temperature, and structure of substituents are discussed. The proposed catalysts were characterized by different techniques, including Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy/energy dispersive X-ray microanalysis (FESEM/EDX), thermogravimetric analysis (TGA), elemental analysis, atomic force microscopy (AFM), and ultraviolet-visible (UV-Vis) spectroscopy. Under optimal reaction conditions, 3-bromopropionic acid (BPA) immobilized on N-GQD showed a remarkable activity, affording the highest yield of 98% at 140°C and 10⁶ Pa without any co-catalyst or solvent. These new metal-free catalysts have the advantage of easy separation and reuse several times. Based on the experimental data, a plausible reaction mechanism is suggested, where the hydrogen bonding donors and halogen ion can activate the epoxide, and amine functional groups play a vital role in CO₂ adsorption.

A novel zirconium-based metal-organic framework covalently modified by methyl pyridinium bromide for mild and co-catalyst free conversion of CO2 to cyclic carbonates

Building metal-organic frameworks (MOFs) covalently modified by onium halides is a promising approach to develop efficient MOF-based heterogeneous catalysts for the cycloaddition of CO₂ to epoxides (CCE) into cyclic carbonates. Herein, we report a novel zirconium-based MOF covalently modified by methyl pyridinium bromide, Zr₆O₄(OH)₄(MPTDC)_2.2(N-CH₃-MPTDC)_3.8Br_3.8 ((Br-)CH3-Pyridinium-MOF-1), where MPTDC denotes 3-methyl-4-pyridin-4-yl-thieno[2,3-b] thiophene-2,5-dicarboxylate. The structure and composition of this complex were fully characterized with PXRD, NMR, XPS, TEM and so on. CO₂ adsorption experiments show that (Br-)CH3-Pyridinium-MOF-1 has a higher affinity for CO₂ than its electrically neutral precursor, which should be attributed to the fact that charging frameworks containing pyridinium salt have stronger polarization to CO₂. (Br-)CH3-Pyridinium-MOF-1 integrated reactive Lewis acid sites and Br^- nucleophilic anions and exhibited efficient catalytic activity for CCE under ambient pressure in the absence of co-catalysts and solvents. Furthermore, (Br-)CH3-Pyridinium-MOF-1 was recycled after five successive cycles without substantial loss in catalytic activity. The corresponding reaction mechanism also was speculated.

The Progress of Metal-Organic Framework for Boosting CO2 Conversion

With the rapid development of modern society, environmental problems, including excessive amounts of CO2 released in the atmosphere, are becoming more and more serious. It is necessary to develop new materials and technologies to reduce pollution. Among them, metal–organic frameworks (MOFs) have shown potential for application in the area of catalysis due to their ultra-high specific surface area, structural versatility, and designability as well as ease of modification and post-synthesis. Herein, we summarize recent research advances by use of MOFs for boosting CO2 conversion. Furthermore, challenges and possible research directions related to further exploration are also discussed.

Efficient imidazolium ionic liquid as a tri-functional robust catalyst for chemical fixation of CO2 into cyclic carbonates

The recent increase in CO₂ levels has had an extensive impact on the environment; hence an effective catalyst for chemical CO₂ fixation into value-added products is demanded. This work demonstrates a simple approach towards the chemical fixation of CO₂ to cyclic carbonates without solvent, metal and additives using one-pot synthesized tri-functional-imidazolium bromide ionic liquid. Herein, synthesized tri-functional-imidazolium-based ionic liquids, namely 3-(2-hydroxyethyl)-1-vinyl-1H-imidazole-3-ium bromide ([VIMEtOH][Br] (24 and 72 h)), 3-(2-hydroxyethyl)-1-vinyl-1H-imidazole-3-ium hydroxyl ([VIMEtOH][OH]) and poly 3-(2-hydroxyethyl)-1-vinyl-1H-imidazole-3-ium bromide (poly [VIMEtOH][Br]), were used for the comprehensive investigation of chemical fixation of CO₂ into cyclic carbonates and their physiochemical properties. In case of [VIMEtOH][Br] ionic liquid, it displayed time-dependent synthesis dissolution in the reaction system. This study found that [VIMEtOH][Br]-72 ionic liquid is not dissolved in the reaction system. The effect on the catalytic efficiency of the presence of functional groups in ionic liquids such as N-vinyl (-CC-N), acidic proton of imidazolium (-C (2)-H) and hydroxyl (-OH) along with bromide anion and the reaction conditions are systematically investigated. For CO₂ fixation, 99.6% conversion of propylene oxide with an excellent selectivity of propylene carbonate (≥99%) over [VIMEtOH][Br]-72 catalyst (at 120 °C, 2 MPa, 2 h) was observed without co-catalyst, metal and solvent. Also, it demonstrated an excellent wide substrates scope of epoxide and all reactions were performed on gram-scalable, which are potential prospects for industrial use.

Potential Applications of Nickel-Based Metal-Organic Frameworks and their Derivatives

Metal-Organic Frameworks (MOFs), a novel class of porous extended crystalline structures, are favored in different fields of heterogeneous catalysis, CO₂ separation and conversion, and energy storage (supercapacitors) due to their convenience of synthesis, structural tailor-ability, tunable pore size, high porosity, large specific surface area, devisable structures, and adjustable compositions. Nickel (Ni) is a ubiquitous element extensively applied in various fields of catalysis and energy storage due to its low cost, high abundance, thermal and chemical stability, and environmentally benign nature. Ni-based MOFs and their derivatives provide us with the opportunity to modify different properties of the Ni center to improve their potential as heterogeneous catalysts or energy storage materials. The recent achievements of Ni-MOFs and their derivatives as catalysts, membrane materials for CO₂ separation and conversion, electrode materials and their respective performance have been discussed in this review.

Recent Progress of SAPO-34 Zeolite Membranes for CO2 Separation: A Review

In the zeolite family, the silicoaluminophosphate (SAPO)-34 zeolite has a unique chemical structure, distinctive pore size, adsorption characteristics, as well as chemical and thermal stability, and recently, has attracted much research attention. Increasing global carbon dioxide (CO₂) emissions pose a serious environmental threat to humans, animals, plants, and the entire environment. This mini-review summarizes the role of SAPO-34 zeolite membranes, including mixed matrix membranes (MMMs) and pure SAPO-34 membranes in CO₂ separation. Specifically, this paper summarizes significant developments in SAPO-34 membranes for CO₂ removal from air and natural gas. Consideration is given to a variety of successes in SAPO-34 membranes, and future ideas are described in detail to foresee how SAPO-34 could be employed to mitigate greenhouse gas emissions. We hope that this study will serve as a detailed guide to the use of SAPO-34 membranes in industrial CO₂ separation.

A Review on SAPO-34 Zeolite Materials for CO2 Capture and Conversion

Among several known zeolites, silicoaluminophosphate (SAPO)-34 zeolite exhibits a distinct chemical structure, unique pore size distribution, and chemical, thermal, and ion exchange capabilities, which have recently attracted considerable research attention. Global carbon dioxide (CO₂ ) emissions are a serious environmental issue. Current atmospheric CO₂ level exceeds 414 parts per million (ppm), which greatly influences humans, fauna, flora, and the ecosystem as a whole. Zeolites play a vital role in CO₂ removal, recycling, and utilization. This review summarizes the properties of the SAPO-34 zeolite and its role in CO₂ capture and separation from air and natural gas. In addition, due to their high thermal stability and catalytic nature, CO₂ conversions into valuable products over single metal, bi-metallic, and tri-metallic catalysts and their oxides supported on SAPO-34 were also summarized. Considering these accomplishments, substantial problems related to SAPO-34 are discussed, and future recommendations are offered in detail to predict how SAPO-34 could be employed for greenhouse gas mitigation.

Metal–Organic Frameworks (MOFs) and Materials Derived from MOFs as Catalysts for the Development of Green Processes

This review will be centered around the work that has been reported on the development of metal–organic frameworks (MOFs) serving as catalysts for the conversion of carbon dioxide into short-chain hydrocarbons and the generation of clean energies starting from biomass. MOFs have mainly been used as support for catalysts or to prepare catalysts derived from MOFs (as sacrifice template), obtaining interesting results in the hydrogenation or oxidation of biomass. They have presented a good performance in the hydrogenation of CO2 into light hydrocarbon fuels. The common patterns to be considered in the performance of the catalysts are the acidity of MOFs, metal nodes, surface area and the dispersion of the active sites, and these parameters will be discussed in this review.

A Review of Preparation Methods for Heterogeneous Catalysts

:

Catalysts contribute significantly to the industrial revolution in terms of reaction rates and reduction in production costs. Extensive research has been documented on various industrial catalysis in the last few decades. The performance of catalysts is influenced by many parameters, including synthesis methods. The current work overviews the most common methods applied for the synthesis of supported catalysts. This review presents the detailed background, principles, and mechanism of each preparation method. The advantages and limitations of each method have also been elaborated in detail. In addition, the applications of each method in terms of catalyst synthesis have been documented in the present review paper.

Advanced strategies in Metal-Organic Frameworks for CO2 Capture and Separation

The continuous carbon dioxide (CO₂ ) gas emissions associated with fossil fuel production, valorization, and utilization are serious challenges to the global environment. Therefore, several developments of CO₂ capture, separation, transportation, storage, and valorization have been explored. Consequently, we documented a comprehensive review of the most advanced strategies adopted in metal-organic frameworks (MOFs) for CO₂ capture and separation. The enhancements in CO₂ capture and separation are generally achieved due to the chemistry of MOFs by controlling pore window, pore size, open-metal sites, acidity, chemical doping, post or pre-synthetic modifications. The chemistry of defects engineering, breathing in MOFs, functionalization in MOFs, hydrophobicity, and topology are the salient advanced strategies, recently reported in MOFs for CO₂ capture and separation. Therefore, this review summarizes MOF materials' advancement explaining different strategies and their role in the CO₂ mitigations. The study also provided useful insights into key areas for further investigations.

ZIF-95 as a filler for enhanced gas separation performance of polysulfone membrane

Metal-organic frameworks (MOFs) are found to be promising porous crystalline materials for application in gas separation. Considering that mixed matrix membranes usually increase the gas separation performance of a polymer by increasing selectivity, permeability, or both (i.e., perm-selectivity), the zeolitic imidazole framework-95 (ZIF-95) MOF was dispersed for the first time in polysulfone (PSF) polymer to form mixed matrix membranes (MMMs), namely, ZIF-95/PSF. The fabricated ZIF-95/PSF membranes were examined for the separation of various gases. The characterization of solvothermally synthesized ZIF-95 was carried out using different analyses such as powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), porosity measurements, etc. ZIF-95 was mixed with PSF at 8%, 16%, 24%, and 32% weight percent to form different loading MMMs. SEM analysis of membranes revealed good compatibility/adhesion between the MOF and polymer. The permeability of He, H₂, O₂, CO₂, N₂, and CH₄ were measured for the pure and composite membranes. The ideal selectivity of different gas pairs were calculated and compared with reported mixed matrix membranes. The maximum increases in permeabilities were observed in 32% loaded membrane; nevertheless, these performance/permeability increases were at the expense of a slight decrease of selectivity. In the optimally loaded membrane (i.e., 24 wt% loaded membrane), the permeability of H₂, O₂, and CO₂ increased by 80.2%, 78.0%, and 67.2%, respectively, as compared to the pure membrane. Moreover, the selectivity of H₂/CH₄, O₂/N₂, and H₂/CO₂ gas pairs also increased by 16%, 15%, and 8% in the 24% loaded membrane, respectively.

Electrochemical Reduction of CO2: A Review of Cobalt Based Catalysts for Carbon Dioxide Conversion to Fuels

Electrochemical CO2 reduction reaction (CO2RR) provides a promising approach to curbing harmful emissions contributing to global warming. However, several challenges hinder the commercialization of this technology, including high overpotentials, electrode instability, and low Faradic efficiencies of desirable products. Several materials have been developed to overcome these challenges. This mini-review discusses the recent performance of various cobalt (Co) electrocatalysts, including Co-single atom, Co-multi metals, Co-complexes, Co-based metal-organic frameworks (MOFs), Co-based covalent organic frameworks (COFs), Co-nitrides, and Co-oxides. These materials are reviewed with respect to their stability of facilitating CO2 conversion to valuable products, and a summary of the current literature is highlighted, along with future perspectives for the development of efficient CO2RR.

Trends and Prospects in UiO-66 Metal-Organic Framework for CO2 Capture, Separation, and Conversion

Among thousands of known metal-organic frameworks (MOFs), the University of Oslo's MOF (UiO-66) exhibits unique structure topology, chemical and thermal stability, and intriguing tunable properties, that have gained incredible research interest. This paper summarizes the structural advancement of UiO-66 and its role in CO₂ capture, separation, and transformation into chemicals. The first part of the review summarizes the fast-growing literature related to the CO₂ capture reported by UiO-66 during the past ten years. The second part provides an overview of various advancements in UiO-66 membranes in CO₂ purification. The third part describes the role of UiO-66 and its composites as catalysts for CO₂ conversion into useful products. Despite many achievements, significant challenges associated with UiO-66 are addressed, and future perspectives are comprehensively presented to forecast how UiO-66 might be used further for CO₂ management.

Bismuth-Graphene Nanohybrids: Synthesis, Reaction Mechanisms, and Photocatalytic Applications—A Review

Photocatalysis is a classical solution to energy conversion and environmental pollution control problems. In photocatalysis, the development and exploration of new visible light catalysts and their synthesis and modification strategies are crucial. It is also essential to understand the mechanism of these reactions in the various reaction media. Recently, bismuth and graphene’s unique geometrical and electronic properties have attracted considerable attention in photocatalysis. This review summarizes bismuth-graphene nanohybrids’ synthetic processes with various design considerations, fundamental mechanisms of action, heterogeneous photocatalysis, benefits, and challenges. Some key applications in energy conversion and environmental pollution control are discussed, such as CO2 reduction, water splitting, pollutant degradation, disinfection, and organic transformations. The detailed perspective of bismuth-graphene nanohybrids’ applications in various research fields presented herein should be of equal interest to academic and industrial scientists.

An uncoordinated tertiary nitrogen based tricarboxylate calcium network with Lewis acid-base dual catalytic sites for cyanosilylation of aldehydes

The design and utilization of dual sites for synergistic catalysts has been recognised as an efficient method towards high-efficiency catalysis in the cyanosilylation of aldehydes, which gives key intermediates for the synthesis of a number of valuable natural and pharmaceutical compounds. However, most of the reported dual-site catalysts for this reaction were homogeneous, accompanied by potential deactivation through internal complexation of the dual sites. Herein, by the rational selection of an uncoordinated tertiary nitrogen based tricarboxylic ligand (tris[(4-carboxyl)-phenylduryl]amine, H3TCBPA), a new three-dimensional calcium-based metal-organic framework (MOF), Ca3(TCBPA)2(DMA)2(H2O)2 (1, where TCBPA = ionized tris[(4-carboxyl)-phenylduryl]amine and DMA = N,N-dimethylacetamide), possessing accessible dual catalytic sites, Lewis-basic N and Lewis-acidic Ca, has been designed and constructed by a one-pot solvothermal reaction. As expected, 1 is capable of dually and heterogeneously catalysing the cyanosilylation of aldehydes at room temperature, and can be reused for at least 6 runs with a maximum turnover number (TON) of 1301, which is superior to most reported cases. Additionally, 1 shows CO2 adsorption ability and conversion with epoxides, which is beneficial for the establishment of a sustainable society.