Fluorescence sensing and imaging with carbon-based quantum dots for early diagnosis of cancer: A review

Facile synthesis of long-wavelength emission carbon dots for hypochlorite sensing and intracellular pH imaging

Hypochlorite (ClO-), a typical reactive oxygen species, plays an irreplaceable roles in various biological processes. In this work, long-wavelength emission carbon dots (LW-CDs) were fabricated through one-step hydrothermal method by using l-cysteine (cys) and neutral red (NR) as precursors for monitoring of hypochlorite and intracellular pH. Characterizations of as-prepared LW-CDs showed that they had excellent water solubility, high optical stability and sensitive response behavior. Fluorescence intensity of LW-CDs decayed in the presence of ClO- linearly from 10 to 162.5 μM (LOD = 1.021 μM) based on static quenching effect with ideal selectivity. Besides, LW-CDs revealed a pH responsive behavior in the pH range of 2.0 to 10.0, exhibited dual good linear relationships in the pH ranges of 4.2-5.8 and 5.8-7.4. The LW-CDs can also be utilized as imaging reagents in Hela living cells owing excellent biocompatibility and low cytotoxicity. These results demonstrated that the as-mentioned LW-CDs are expected to serve as excellent long wavelength emitting nanomaterials for fluorescence sensing and monitoring of cell fluctuations.

Nitrogen doped carbon dots and gold nanoparticles mediated FRET for the detection of creatinine in human urine samples

Serum creatinine (CR) is regarded as one of the most sought out prognostic biomarkers in medical evaluation of chronic kidney disease (CKD). In light of the diagnostic significance of CR, the utility of a fluorescence biosensor for its detection in human urine specimens has been explored based on Förster resonance energy transfer (FRET) across nitrogen-doped carbon dots (N-CDs) and gold nanoparticles (GNPs). A straightforward microwave-assisted synthesis procedure has been adopted to prepare N-CDs (λexcitation = 400 nm, λemission = 540 ± 5 nm) with bright green emissions. On addition of pre-synthesized GNPs, the radiative emanation of the N-CDs is completely suppressed on account of FRET across the N-CDs and the GNPs. About 77 % of their fluorescence intensity is recovered after adding CR to GNPs@N-CDs nanocomposite. The limit of detection for CR sensing is estimated as 0.02 µg•mL-1. This biosensor is selective enough to recognize CR in the existence of potential interfering substances (e.g., ascorbic acid, glucose, glutathione, urea, and electrolytes). Its practical utility for CR detection has been validated further on the basis of satisfactory correlation with the benchmark Jaffe method, as observed in artificial/human urine specimens. Consequently, this manuscript marks a pioneering report on employing CDs and GNPs-based FRET for identifying CR in urine specimens of CKD patients.

Progress on Carbon Dots with Intrinsic Bioactivities for Multimodal Theranostics

Carbon dots (CDs) with intrinsic bioactivities are candidates for bioimaging and disease therapy due to their diverse bioactivities, high biocompatibility, and multiple functionalities in multimodal theranostics. It is a multidisciplinary research hotspot that includes biology, physics, materials science, and chemistry. This progress report discusses the CDs with intrinsic bioactivities and their applications in multimodal theranostics. The relationship between the synthesis and structure of CDs is summarized and analyzed from a material and chemical perspective. The bioactivities of CDs including anti-tumor, antibacterial, anti-inflammatory etc. are discussed from biological points of view. Subsequently, the optical and electronic properties of CDs that can be applied in the biomedical field are summarized from a physical perspective. Based on the functional review of CDs, their applications in the biomedical field are reviewed, including optical diagnosis and treatment, biological activity, etc. Unlike previous reviews, this review combines multiple disciplines to gain a more comprehensive understanding of the mechanisms, functions, and applications of CDs with intrinsic bioactivities.

Emerging electrochemical biosensors for lung cancer-associated protein biomarker and miRNA detection

Lung cancer remains a major driver of global morbidity and mortality, and diagnosing lung tumors early in their development is vital to maximizing treatment efficacy and patient survival. Several biomarkers, including CYFRA 21-1, NSE, ProGRP, CEA, and miRNA, have been identified as reliable indicators for early lung cancer detection and monitoring treatment progress. However, the minute changes in the levels of these biomarkers during the early stages of disease necessitate advanced detection platforms. In this space, electrochemical biosensors have currently emerged as robust tools for early lung cancer screening and diagnosis owing to their low costs, rapid responses, and superior sensitivity and selectivity. This review provides an up-to-date overview of the application of electrochemiluminescence, photoelectrochemical, and other electrochemical analytical strategies for detecting lung cancer-associated protein biomarkers, and miRNA. This review compares these techniques to provide a concise overview of the principles underlying these electrochemical analytical methods, the preparation of their components, and the performance of the resulting biosensors. Lastly, a discussion of the challenges and opportunities associated with electrochemical biosensors detection of lung cancer-associated biomarkers are provided.

Recognition and detection of histamine in foods using aptamer modified fluorescence polymer dots sensors

Histamine has been known as a momentous cause of biogenic amine poisoning. Therefore, the content of histamine in foods is strictly required to be controlled within a certain range. Here, an aptamer fluorescent sensor was developed for detection of histamine. Poly [(9, 9-di-n-octylfluorenyl-2, 7-diyl)-alt-(benzo [2,1,3] thiadia-zol-4, 8-diyl)] (PF8BT) and the styrene maleic anhydride copolymer (PSMA) were used for the preparation of PF8BT-Polymer dots (PF8BT-Pdots). PF8BT-Pdots and the cyanine3-phosphoramidite (Cy3) were linked through aptamer to achieve the ratiometric detection for histamine. PF8BT-Pdots were partly quenched by Cy3 due to the fluorescence resonance energy transfer (FRET), when the histamine molecule was recognized by aptamer on the surface of PF8BT-Pdots. A linear range (3-21 μmol/L) was obtained for histamine detection with a low limit of detection (LOD = 0.38 μmol/L). PF8BT aptamer Pdots (PF8BT-A) were used to detect histamine in simply treated aquaculture water and tuna. The cell imaging of HeLa cells presented a good biosecurity and outstanding fluorescent imaging capability of PF8BT-A. The aptamer fluorescent sensors provided a new platform for rapid and accurate detection of histamine in aquatic products and had great potential for the application in food safety and quality control.

DNA/RNA-based electrochemical nanobiosensors for early detection of cancers

Nucleic acids, like DNA and RNA, serve as versatile recognition elements in electrochemical biosensors, demonstrating notable efficacy in detecting various cancer biomarkers with high sensitivity and selectivity. These biosensors offer advantages such as cost-effectiveness, rapid response, ease of operation, and minimal sample preparation. This review provides a comprehensive overview of recent developments in nucleic acid-based electrochemical biosensors for cancer diagnosis, comparing them with antibody-based counterparts. Specific examples targeting key cancer biomarkers, including prostate-specific antigen, microRNA-21, and carcinoembryonic antigen, are highlighted. The discussion delves into challenges and limitations, encompassing stability, reproducibility, interference, and standardization issues. The review suggests future research directions, exploring new nucleic acid recognition elements, innovative transducer materials and designs, novel signal amplification strategies, and integration with microfluidic devices or portable instruments. Evaluating these biosensors in clinical settings using actual samples from cancer patients or healthy donors is emphasized. These sensors are sensitive and specific at detecting non-communicable and communicable disease biomarkers. DNA and RNA's self-assembly, programmability, catalytic activity, and dynamic behavior enable adaptable sensing platforms. They can increase biosensor biocompatibility, stability, signal transduction, and amplification with nanomaterials. In conclusion, nucleic acids-based electrochemical biosensors hold significant potential to enhance cancer detection and treatment through early and accurate diagnosis.

Applicability of Quantum Dots in Breast Cancer Diagnostic and Therapeutic Modalities-A State-of-the-Art Review

The increasing incidence of breast cancers (BCs) in the world population and their complexity and high metastatic ability are serious concerns for healthcare systems. Despite the significant progress in medicine made in recent decades, the efficient treatment of invasive cancers still remains challenging. Chemotherapy, a fundamental systemic treatment method, is burdened with severe adverse effects, with efficacy limited by resistance development and risk of disease recurrence. Also, current diagnostic methods have certain drawbacks, attracting attention to the idea of developing novel, more sensitive detection and therapeutic modalities. It seems the solution for these issues can be provided by nanotechnology. Particularly, quantum dots (QDs) have been extensively evaluated as potential targeted drug delivery vehicles and, simultaneously, sensing and bioimaging probes. These fluorescent nanoparticles offer unlimited possibilities of surface modifications, allowing for the attachment of biomolecules, such as antibodies or proteins, and drug molecules, among others. In this work, we discuss the potential applicability of QDs in breast cancer diagnostics and treatment in light of the current knowledge. We begin with introducing the molecular and histopathological features of BCs, standard therapeutic regimens, and current diagnostic methods. Further, the features of QDs, along with their uptake, biodistribution patterns, and cytotoxicity, are described. Based on the reports published in recent years, we present the progress in research on possible QD use in improving BC diagnostics and treatment efficacy as chemotherapeutic delivery vehicles and photosensitizing agents, along with the stages of their development. We also address limitations and open questions regarding this topic.

Green one-step synthesis of N-doped carbon quantum dots for fluorescent detection of lemon yellow in soft drinks

A new fluorescent sensor for the determination of lemon yellow was developed based on nitrogen-doped carbon quantum dots (N-CQDs), which were prepared via a hydrothermal method with dried pomelo peel and L-tyrosine. The N-CQDs exhibited the blue fluorescence with a quantum yield of 28 %. The sensing principle of N-CQDs was quenched by lemon yellow via static quenching. The potential interfering substances showed no influence on the detection of lemon yellow. The limit of detection was 0.023 mg/L and lower than that of national standard. Furthermore, the synthesized N-CQDs have been successfully applied to the measurement of lemon yellow in real samples. Hence, the N-CQDs would be a promising sensor in food analysis.

Construction of fluorescent sensor array with nitrogen-doped carbon dots for sensing Sudan Orange G and identification of various azo compounds

In this study, nitrogen-doped carbon dots (N-CDs) were facilely fabricated by one-pot hydrothermal method with levulinic acid and triethanolamine. A fluorescent sensor array was established for identifying azo compounds including Sudan Orange G (SOG), p-diaminoazobenzene, p-aminoazobenzene, azobenzene and quantitative detection of SOG. Experimental results revealed that azo compounds could quench the fluorescent intensity of N-CDs. Owing to various azo compounds showing different affinities to N-CDs, the sensor array exhibited different fluorescence quenching changes, which were further analyzed with principal component analysis to discriminate azo compounds. The sensor array was able to differentiate and recognize diverse concentrations of azo compounds from 0.25 to 2 mg/L. Simultaneously, a variety of factors affecting the detection of SOG were optimized. Under the optimized conditions, the sensor showed excellent stability and sensitivity. The sensor possessed marvelous linearity in the range of 0.1-1 mg/L and 1-4 mg/L and the detection limit was 27.82 μg/L. Spiked recoveries of 90.8-98.2 % were attained at spiked levels of 0.2 mg/L and 1 mg/L, demonstrating that the constructed fluorescence sensor was dependable and feasible for sensing SOG in environmental water samples.

Biotin-functionalized nanoparticles: an overview of recent trends in cancer detection

Electrochemical bio-sensing is a potent and efficient method for converting various biological recognition events into voltage, current, and impedance electrical signals. Biochemical sensors are now a common part of medical applications, such as detecting blood glucose levels, detecting food pathogens, and detecting specific cancers. As an exciting feature, bio-affinity couples, such as proteins with aptamers, ligands, paired nucleotides, and antibodies with antigens, are commonly used as bio-sensitive elements in electrochemical biosensors. Biotin-avidin interactions have been utilized for various purposes in recent years, such as targeting drugs, diagnosing clinically, labeling immunologically, biotechnology, biomedical engineering, and separating or purifying biomolecular compounds. The interaction between biotin and avidin is widely regarded as one of the most robust and reliable noncovalent interactions due to its high bi-affinity and ability to remain selective and accurate under various reaction conditions and bio-molecular attachments. More recently, there have been numerous attempts to develop electrochemical sensors to sense circulating cancer cells and the measurement of intracellular levels of protein thiols, formaldehyde, vitamin-targeted polymers, huwentoxin-I, anti-human antibodies, and a variety of tumor markers (including alpha-fetoprotein, epidermal growth factor receptor, prostate-specific Ag, carcinoembryonic Ag, cancer antigen 125, cancer antigen 15-3, etc.). Still, the non-specific binding of biotin to endogenous biotin-binding proteins present in biological samples can result in false-positive signals and hinder the accurate detection of cancer biomarkers. This review summarizes various categories of biotin-functional nanoparticles designed to detect such biomarkers and highlights some challenges in using them as diagnostic tools.

Azoanthracene-core structure as Cu2+-assisted CO sensing probe: Characterization, performance, and bioimaging

Detection of endogenous CO (carbon monoxide) is an interesting topic in biology because it has been discovered as a messenger for signal transduction and therapeutic effects in vital biological activities. Fluorescence imaging has proven a powerful tool for detecting endogenous CO, which drives the development of low-cost and easy-to-use fluorescent probes. In this study, four azobenzene derivatives (A1, A2, A3, and A4) with various substituents were reported, including their geometric structures, photophysical parameters, and spectral responses to Cu2+ and CO. The relationship between substituent structure and performance was discussed along with Cu2+ quenching and CO sensing mechanisms. The optimal probe (A1), which had no substituent, efficiently quenched fluorescence in the presence of Cu2+, with its PLQY decreased from 0.33 to 0.02, PLQY = photoluminescence quantum yield. Upon CO deoxidization, A1's fluorescence could be recovered (PLQY recovered to 0.32) within 180 s. Its sensing mechanism was static by forming a non-fluorescent complex with Cu2+ (with a stoichiometric ratio of 1:1). The bioimaging performance of A1 for endogenous CO in HeLa cells was reported.

Current development of theragnostic nanoparticles for women's cancer treatment

In the biomedical industry, nanoparticles (NPs-exclusively small particles with size ranging from 1-100 nanometres) are recently employed as powerful tools due to their huge potential in sophisticated and enhanced cancer theragnostic (i.e. therapeutics and diagnostics). Cancer is a life-threatening disease caused by carcinogenic agents and mutation in cells, leading to uncontrolled cell growth and harming the body's normal functioning while affecting several factors like low levels of reactive oxygen species, hyperactive antiapoptotic mRNA expression, reduced proapoptotic mRNA expression, damaged DNA repair, and so on. NPs are extensively used in early cancer diagnosis and are functionalized to target receptors overexpressing cancer cells for effective cancer treatment. This review focuses explicitly on how NPs alone and combined with imaging techniques and advanced treatment techniques have been researched against 'women's cancer' such as breast, ovarian, and cervical cancer which are substantially occurring in women. NPs, in combination with numerous imaging techniques (like PET, SPECT, MRI, etc) have been widely explored for cancer imaging and understanding tumor characteristics. Moreover, NPs in combination with various advanced cancer therapeutics (like magnetic hyperthermia, pH responsiveness, photothermal therapy, etc), have been stated to be more targeted and effective therapeutic strategies with negligible side effects. Furthermore, this review will further help to improve treatment outcomes and patient quality of life based on the theragnostic application-based studies of NPs in women's cancer treatment.

Oxidative stress-induced neurotoxicity of quantum dots and influencing factors

Quantum dots (QDs) have significant potential for treating and diagnosing CNS diseases. Meanwhile, the neurotoxicity of QDs has garnered attention. In this review, we focus on elucidating the mechanisms and consequences of CNS oxidative stress induced by QDs. First, we discussed the pathway of QDs transit into the brain. We then elucidate the relationship between QDs and oxidative stress from in vivo and in vitro studies. Furthermore, the main reasons and adverse outcomes of QDs leading to oxidative stress are discussed. In addition, the primary factors that may affect the neurotoxicity of QDs are analyzed. Finally, we propose potential strategies for mitigating QDs neurotoxicity and outline future perspectives for their development.

Fluorescence Detection of Pb2+ in Environmental Water Using Biomass Carbon Quantum Dots Modified with Acetamide-Glycolic Acid Deep Eutectic Solvent

In this study, a novel green fluorescent probe material, nitrogen-doped carbon quantum dots (N-CQDs), was prepared by a one-step hydrothermal synthesis method using walnut green skin as a carbon source and acetamide-glycolic acid deep eutectic solvent (AGADES) as a modifier. By covalent coupling, the amide chromophore in AGADES is designed to cover the surface of walnut green skin carbon quantum dots (W-CQDs), forming a fluorescence energy resonance effect and improving the fluorescence performance of the carbon quantum dots. The prepared N-CQDs have a uniform particle size distribution, and the fluorescence quantum efficiency has increased from 12.5% to 32.5%. Within the concentration range of 0.01~1000 μmol/L of Pb2+, the linear detection limit is 1.55 nmol/L, which can meet the trace detection of Pb2+ in the water environment, and the recycling rate reaches 97%. This method has been successfully applied to the fluorescence detection and reuse of Pb2+ in actual water bodies, providing new ideas and methods for the detection of heavy metal ions in environmental water.

A portable fluorescence detection device based on a smartphone employing carbon nanodots for Mn2+ sensing

The measurement of fluorescence emission for quantitative analysis is typically based on a traditional spectrofluorometer, which limits an onsite detection approach. Thus, an alternative device should be developed for fulfilling this analysis outside of the laboratory. Therefore, a low-cost, portable, and low-energy consumption fluorescence reader-based smartphone device was developed. An ultraviolet light-emitting diodes (UV-LED) was used to construct the fluorescence device-based smartphone as a low-power excitation light source. The smartphone camera was used as a detector for detecting photons from the fluorescence emission process of the fluorescence probe and was connected to a digital image platform. Transparent acrylic with orange and yellow colors was employed as a filter for reducing the interference from light source intensity. The obtained digital image was converted to red, green and blue (RGB) intensity using a custom-designed smartphone application. N,S-doped carbon nanodots (N,S-CDs) were demonstrated to be a good fluorescence indicator for determining trace quantities of Mn2+ in cosmetics. The approach exhibited high selectivity and sensitivity, detecting and quantifying analytes at 1-5 μM concentrations. Furthermore, the method's detection limit of 0.5 μM reflects its capacity to detect trace amounts of a target analyte. Mn2+ in cosmetic products was successfully analyzed using this device with high accuracy comparable with the results from inductively coupled plasma-optical emission spectroscopy (ICP-OES).

Green Synthesis of Carbon Quantum dots Derived from Lycium barbarum for Effective Fluorescence Detection of Cr (VI) Sensing

Green and economical self-doped nitrogen-containing fluorescent carbon quantum dots (N-CQDs) were synthesized using a one-pot hydrothermal treatment method. The optical and structural properties of the N-CQDs were investigated in detail by UV-vis and fluorescence spectroscopy, X-ray diffraction (XRD) techniques, transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) spectroscopy, and elemental analysis illustrate the surface function and composition of N-CQDs. N-CQDs emit a broad fluorescence between365 ̴ 465 nm and fluoresce most strongly at the excitation wavelength of 415 nm. Meanwhile, Cr (VI) could significantly burst the fluorescence intensity of N-CQDs. N-CQDs showed an excellent sensitivity and selectivity to Cr (VI), which exhibited good linearity in the range of 0 ̴ 40 µmol/L with a detection limit of 0.16 µmol/L. In addition, the mechanism of Fluorescence quenching of N-CQDs by Cr (VI) was investigated. This work well provides a research idea for the preparation of green carbon quantum dots from biomass and their use for the detection of metal ions.

An ultra-sensitive SARS-CoV-2 antigen optical biosensor based on angiotensin converting enzyme 2 (ACE-2) functionalized magnetic-fluorescent silica nanoparticles

This work reports on the design and synthesis of an angiotensin-converting enzyme 2 (ACE-2) functionalized magnetic fluorescent silica nanoparticles (Fe-FSNP) as a biosensing platform to detect severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antigen. Iron oxide (Fe3O4) nanoparticles were synthesized via ultrasonic-assisted coprecipitation and then coated with fluorescent silica nanoparticles (FSNP) through thesol-gelmethod forming the Fe-FSNP samples. Silica obtained from local geothermal powerplant was used in this work and Rhodamine B was chosen as the incorporated fluorescent dye, hence this reports for the first time ACE-2 was immobilized on the natural silica surface. The Fe-FSNP nanoparticle consists of a 18-25 nm magnetic core and a silica shell with a thickness of 30 nm as confirmed from the transmission electron microscopy image. Successful surface functionalization of the Fe-FSNP with ACE-2 as bioreceptor was conducted through hydrosylilation reaction and confirmed through the Fourier transform infrared spectroscopy. The detection of SARS-Cov-2 antigen by Fe-FSNP/ACE2 was measured through the change in its maximum fluorescence intensity at 588 nm where fluorescence- quenching had occurred. The biosensing platform showed a rapid response at 30 min with a linear range of 10-6to 10-2μg ml-1. The magnetic-fluorescent properties of the nanoparticle enables an ultra-sensitive detection of SARS-Cov-2 antigen with the limit of detection as low as 2 fg ml-1.

Carbon quantum dot with co-doped nitrogen and phosphorus for tazettine ratiometric fluorescent sensing

An overdose of tazettine (TZ) has toxic side effects, which makes it extremely important to rapidly and subtly determine the TZ. In this study, double-emitting, nitrogen-phosphorus co-doped carbon quantum dots (N,P-CQDs) were prepared using cis-butenedioic acid, phosphoric acid, and p-phenylenediamine. An effective inner filter effect (IFE) can occur between TZ and N,P-CQDs, resulting in their fluorescence quench. Therefore, a ratio fluorescent probe was constructed for detecting the TZ was constructed. After optimizing the experimental conditions, the quenching efficiency showed a strong linear connection with the TZ concentration in the range of 0.01-30 µmol/L, with the detection limit of 0.002 µmol/L. This method could be satisfactorily applied to detect TZ in mouse plasma samples.

A multiple cancer cell optical biosensing metastructure realized by CPA

A one-dimensional optical biosensing metastructure (OBM) with graphene layers is presented in this paper. It is realized by coherent perfect absorption (CPA) and operates in the transverse electric mode. It shows a strong linear fitting relationship between the refractive index (RI) of the analysis layer and the frequency corresponding to the absorption peak, and the R-square is up to 1. Additionally, based on the principle of CPA, the OBM can realize the function of multiple cancer cell detection by adjusting the detection range by controlling the phase difference of coherent electromagnetic waves. Its detection ranges are 1.34-1.355 and 1.658-1.662. Thanks to its high-quality factor, great figure of merit, and low detection limit, whose best values are, respectively, 6.9 × 104, 1.2 × 104 RIU-1, and 3.6 × 10-6 RIU, the detection of weak changes in the RI of a cancer cell is possible. Additionally, its sensitivity can reach 26.57 THz RIU-1. This OBM based on CPA has major implications for advancing the study and investigation into the application of CPA. It also provides a simple and efficient approach to distinguish cancer cells and may be widely used in the biomedical field.

A highly sensitive fluorescence nanosensor for determination of amikacin antibiotics using composites of carbon quantum dots and gold nanoparticles

Amikacin is an aminoglycoside antibiotic widely used to treat various bacterial infections in humans. However, elevated concentrations of amikacin can damage the cochlear nerve. Thus, accurate and rapid amikacin detection is crucial. In this study, we developed an "on-off" fluorescence nanosensor for highly sensitive amikacin determination based on a composite of carbon quantum dots (CQDs) and gold nanoparticles (AuNPs). The method quenches CQD fluorescence (turn-off) when they bind to AuNPs but restores it (turn-on) when amikacin binds and releases the CQDs. Adding Cu2+ enhances sensitivity by cross-linking amikacin-coated AuNPs. Under optimal conditions (pH 4, 1 mM Na2SO4, 1 mM CuSO4), the method achieved a low detection limit of 3.5 × 10-11 M (0.02 ppb), a wide linear range (10-10 to 10-8 M), high precision (RSD < 5 %), and a rapid 2-minute response time. Exceptional selectivity was observed over other antibiotics. The CQDs/AuNPs-based sensor successfully detected amikacin in pharmaceutical and surface water samples. This approach offers a fast on-site analytical method for amikacin detection, with potential applications in clinical and environmental settings.

An "on-off-on" Fluorescent Sensor Based on Carbon Dots for the Detection of Au (III) and Creatinine

The present study proposes a new approach for detecting trace amounts of creatinine (Cre) through the utilization of a fluorescence sensor system consisting of nitrogen doped carbon dots (NCDs) and gold ions (Au3+). Yellow fluorescent carbon dots were prepared using a one-step hydrothermal method with o-phenylenediamine and isopropanol as raw materials. First, gold ions are reduced to gold nanoparticles (Au NPs), which bind to NCDs, resulting in electron transfer and fluorescence quenching of NCDs. After adding creatinine, Cre and Au NPs were preferentially combined to form non-fluorescent complexes, and the NCDs fluorescence was restored. The study achieved a detection limit of 1.06 × 10-7 M for Au3+ and 9.29 × 10-9 M for creatinine, indicating a high level of sensitivity. The sensing system has also been successfully utilized for detecting Au3+ in lake water and Cre in human urine, indicating its promising potential and practical applications in the areas of environmental monitoring and biosensing.

Ultrasensitive fluorescence immunoassay of pepsinogen I based on enzyme-triggered decomposition of AuNCs/MnO2

Gastric cancer is a prevalent malignant tumor of the gastrointestinal tract accompanied by a high mortality rate; therefore, early gastric cancer screening is critical for improving patient survival. In this study, we present a facile fluorescence immunoassay for highly sensitive screening of pepsinogen I (PG I) based on a one-pot biomimetic mineralization process for the synthesis of gold nanocluster-anchored manganese dioxide (AuNCs/MnO2) nanosheets. MnO2 first quenches the fluorescence of AuNCs through the Förster resonance energy transfer effect, whereas the introduction of ascorbic acid (AA) leads to the decomposition of MnO2 and rapidly recovers the fluorescence of AuNCs. Based on the above principles and phenomena, we developed a sensitive fluorescence immunoassay for the in situ generation of AA to detect PG I. Specifically, in the presence of PG I, the sandwich-type immunoreactivity-enriched alkaline phosphatase-labeled secondary antibody catalyzes the production of AA from the substrate, which enhances the fluorescence intensity. Under optimized conditions, the fluorescence intensity increased linearly with the concentration of PG I (0.05 to 200 ng mL-1) with a limit of detection (LOD) of 0.013 ng mL-1 (S/N = 3). The designed sensing platform has good stability (more than one year) and excellent anti-interference capability and demonstrates satisfactory accuracy for detection in real samples compared to commercial ELISA kits.

Revolutionizing cancer monitoring with carbon-based electrochemical biosensors

Cancer monitoring plays a critical role in improving patient outcomes by providing early detection, personalized treatment options, and treatment response tracking. Carbon-based electrochemical biosensors have emerged in recent years as a revolutionary technology with the potential to revolutionize cancer monitoring. These sensors are useful for clinical applications because of their high sensitivity, selectivity, rapid response, and compatibility with miniaturized equipment. This review paper gives an in-depth look at the latest developments and the possibilities of carbon-based electrochemical sensors in cancer surveillance. The essential principles of carbon-based electrochemical sensors are discussed, including their structure, operating mechanisms, and critical qualities that make them suited for cancer surveillance. Furthermore, we investigate their applicability in detecting specific cancer biomarkers, evaluating therapy responses, and detecting cancer recurrence early. Additionally, a comparison of carbon-based electrochemical sensor performance measures, including sensitivity, selectivity, accuracy, and limit of detection, is presented in contrast to existing monitoring methods and upcoming technologies. Finally, we discuss prospective tactics, future initiatives, and commercialization opportunities for improving the capabilities of these sensors and integrating them into normal clinical practice. The review highlights the potential impact of carbon-based electrochemical sensors on cancer diagnosis, treatment, and patient outcomes, as well as the importance of ongoing research, collaboration, and validation studies to fully realize their potential in revolutionizing cancer monitoring.

In silico evaluation of new mangiferin-based Positron Emission Tomography radiopharmaceuticals through the inhibition of metalloproteinase-9

Metalloproteinase-9 (MMP-9) is a key protein in cancer advancement and metastasis owing to its ability to degrade some extracellular matrix components. Mangiferin, a natural polyphenolic compound, has demonstrated through experimental and theoretical studies to be a great anticancer agent for the selective inhibition of MMP-9. This work aimed to evaluate the utility of several fluorinated compounds obtained from MF as possible Positron Emission Tomography (PET) radiopharmaceuticals oriented to MMP-9. Density Functional Theory calculations of MF were made to obtain the most active sites toward electrophilic and nucleophilic reactions and propose a synthetic route to produce its fluorinated derivatives. The reactivity study allowed us to propose a late-stage synthetic route based on click chemistry to obtain three fluorinated MF-based derivatives. Molecular docking calculations suggested that the derivative F-propyl-MF could be suitable as PET radiopharmaceutical owing to the establishment of a five-coordinated complex with the catalytic Zn atom belonging to the active site of MMP-9, crucial factor in the inhibition of MMP-9.

Emerging trends in nanomaterial design for the development of point-of-care platforms and practical applications

Nanomaterials and nanotechnology offer promising opportunities in point-of-care (POC) diagnostics and therapeutics due to their unique physical and chemical properties. POC platforms aim to provide rapid and portable diagnostic and therapeutic capabilities at the site of patient care, offering cost-effective solutions. Incorporating nanomaterials with distinct optical, electrical, and magnetic properties can revolutionize the POC industry, significantly enhancing the effectiveness and efficiency of diagnostic and theragnostic devices. By leveraging nanoparticles and nanofibers in POC devices, nanomaterials have the potential to improve the accuracy and speed of diagnostic tests, making them more practical for POC settings. Technological advancements, such as smartphone integration, imagery instruments, and attachments, complement and expand the application scope of POCs, reducing invasiveness by enabling analysis of various matrices like saliva and breath. These integrated testing platforms facilitate procedures without compromising diagnosis quality. This review provides a summary of recent trends in POC technologies utilizing nanomaterials and nanotechnologies for analyzing disease biomarkers. It highlights advances in device development, nanomaterial design, and their applications in POC. Additionally, complementary tools used in POC and nanomaterials are discussed, followed by critical analysis of challenges and future directions for these technologies.

Multifunctional GQDs for receptor targeting, drug delivery, and bioimaging in pancreatic cancer

Pancreatic cancer is a devastating disease with a low survival rate and limited treatment options. Graphene quantum dots (GQDs) have recently become popular as a promising platform for cancer diagnosis and treatment due to their exceptional physicochemical properties, such as biocompatibility, stability, and fluorescence. This review discusses the potential of multifunctional GQDs as a platform for receptor targeting, drug delivery, and bioimaging in pancreatic cancer. The current studies emphasized the ability of GQDs to selectively target pancreatic cancer cells by overexpressing binding receptors on the cell surface. Additionally, this review discussed the uses of GQDs as drug delivery vehicles for the controlled and targeted release of therapeutics for pancreatic cancer cells. Finally, the potential of GQDs as imaging agents for pancreatic cancer detection and monitoring has been discussed. Overall, multifunctional GQDs showed great promise as a versatile platform for the diagnosis and treatment of pancreatic cancer. Further investigation of multifunctional GQDs in terms of their potential and optimization in the context of pancreatic cancer therapy is needed.

Aptamer-functionalized quantum dots as theranostic nanotools against cancer and bacterial infections: A comprehensive overview of recent trends

Aptamers (Apts) are synthetic nucleic acid ligands that can be engineered to target various molecules, including amino acids, proteins, and pharmaceuticals. Through a series of adsorption, recovery, and amplification steps, Apts are extracted from combinatorial libraries of synthesized nucleic acids. Using aptasensors in bioanalysis and biomedicine can be improved by combining them with nanomaterials. Moreover, Apt-associated nanomaterials, including liposomes, polymeric, dendrimers, carbon nanomaterials, silica, nanorods, magnetic NPs, and quantum dots (QDs), have been widely used as promising nanotools in biomedicine. Following surface modifications and conjugation with appropriate functional groups, these nanomaterials can be successfully used in aptasensing. Advanced biological assays can use Apts immobilized on QD surfaces through physical interaction and chemical bonding. Accordingly, modern QD aptasensing platforms rely on interactions between QDs, Apts, and targets to detect them. QD-Apt conjugates can be used to directly detect prostate, ovarian, colorectal, and lung cancers or simultaneously detect biomarkers associated with these malignancies. Tenascin-C, mucin 1, prostate-specific antigen, prostate-specific membrane antigen, nucleolin, growth factors, and exosomes are among the cancer biomarkers that can be sensitively detected using such bioconjugates. Furthermore, Apt-conjugated QDs have shown great potential for controlling bacterial infections such as Bacillus thuringiensis, Pseudomonas aeruginosa, Escherichia coli, Acinetobacter baumannii, Campylobacter jejuni, Staphylococcus aureus, and Salmonella typhimurium. This comprehensive review discusses recent advancements in the design of QD-Apt bioconjugates and their applications in cancer and bacterial theranostics.

Dual-Responsive Carbon Quantum Dots for the Simultaneous Detection of Cytosine and 5-Methylcytosine Interpreted by a Machine Learning-Assisted Smartphone

DNA methylation is an epigenetic alteration that results in 5-methylcytosine (5-mC) through the addition of a methyl group to the fifth carbon of a cytosine (C) residue. The methylation level, the ratio of 5-mC to C, in urine might be related to the whole-body epigenetic status and the occurrence of common cancers. To date, never before have any nanomaterials been developed to simultaneously determine C and 5-mC in urine samples. Herein, a dual-responsive fluorescent sensor for the urinary detection of C and 5-mC has been developed. This assay relied on changes in the optical properties of nitrogen-doped carbon quantum dots (CQDs) prepared by microwave-assisted pyrolysis. In the presence of C, the blue-shifted fluorescence intensity of the CQDs increased. However, fluorescence quenching was observed upon the addition of 5-mC. This was primarily due to photoinduced electron transfer as confirmed by the density functional theory calculation. In urine samples, our sensitive fluorescent sensor had detection limits for C and 5-mC of 43.4 and 74.4 μM, respectively, and achieved satisfactory recoveries ranging from 103.5 to 115.8%. The simultaneous detection of C and 5-mC leads to effective methylation level detection, achieving recoveries in the range of 104.6-109.5%. Besides, a machine learning-enabled smartphone was also developed, which can be effectively applied to the determination of methylation levels (0-100%). These results demonstrate a simple but very effective approach for detecting the methylation level in urine, which could have significant implications for predicting the clinical prognosis.

Flexible Stacked Perovskite Photodetectors for High-Efficiency Multicolor Fluorescence Detection

A flexible, multicolor detector based on stacked perovskite layers with graded band gaps was presented. Different perovskite layers generate a series of photocurrents corresponding to light intensities at different wavelengths. Experimentally, the flexible detector demonstrated acceptable long-term stability and temperature stability in the bending state. To demonstrate the advantages of the flexible multicolor detector in biological applications, a tubular-shaped multicolor fluorescence detector that embraces the sample cell was constructed. As a result, the detection limits of three kinds of CdTe quantum dots (QDs) with central wavelengths of 545, 625, and 730 nm were 0.52, 0.85, and 0.43 nM, respectively, which was significantly improved by more than 10 times compared to those of planar detectors. Additionally, the detector was able to detect three kinds of QDs simultaneously in a mixed solution, and the relative deviation was smaller than 10% compared to the preset concentration. These results demonstrate that the flexible stacked perovskite detector and the tubular-shaped detection configuration hold promise for the simultaneous fluorescent detection of multiple biomolecules.

Recent Advances in Quantum Dot-Based Lateral Flow Immunoassays for the Rapid, Point-of-Care Diagnosis of COVID-19

The COVID-19 pandemic has spurred demand for efficient and rapid diagnostic tools that can be deployed at point of care to quickly identify infected individuals. Existing detection methods are time consuming and they lack sensitivity. Point-of-care testing (POCT) has emerged as a promising alternative due to its user-friendliness, rapidity, and high specificity and sensitivity. Such tests can be conveniently conducted at the patient's bedside. Immunodiagnostic methods that offer the rapid identification of positive cases are urgently required. Quantum dots (QDs), known for their multimodal properties, have shown potential in terms of combating or inhibiting the COVID-19 virus. When coupled with specific antibodies, QDs enable the highly sensitive detection of viral antigens in patient samples. Conventional lateral flow immunoassays (LFAs) have been widely used for diagnostic testing due to their simplicity, low cost, and portability. However, they often lack the sensitivity required to accurately detect low viral loads. Quantum dot (QD)-based lateral flow immunoassays have emerged as a promising alternative, offering significant advancements in sensitivity and specificity. Moreover, the lateral flow immunoassay (LFIA) method, which fulfils POCT standards, has gained popularity in diagnosing COVID-19. This review focuses on recent advancements in QD-based LFIA for rapid POCT COVID-19 diagnosis. Strategies to enhance sensitivity using QDs are explored, and the underlying principles of LFIA are elucidated. The benefits of using the QD-based LFIA as a POCT method are highlighted, and its published performance in COVID-19 diagnostics is examined. Overall, the integration of quantum dots with LFIA holds immense promise in terms of revolutionizing COVID-19 detection, treatment, and prevention, offering a convenient and effective approach to combat the pandemic.

Fluorescence attenuated by a thick scattering medium: Theory, simulations and experiments

Fluorescence-based imaging has an enormous impact on our understanding of biological systems. However, in vivo fluorescence imaging is greatly influenced by tissue scattering. A better understanding of this dependence can improve the potential of noninvasive in vivo fluorescence imaging. In this article, we present a diffusion model, based on an existing master-slave model, of isotropic point sources imbedded in a scattering slab, representing fluorophores within a tissue. The model was compared with Monte Carlo simulations and measurements of a fluorescent slide measured through tissue-like phantoms with different reduced scattering coefficients (0.5-2.5 mm^-1 ) and thicknesses (0.5-5 mm). Results show a good correlation between our suggested theory, simulations and experiments; while the fluorescence intensity decays as the slab's scattering and thickness increase, the decay rate decreases as the reduced scattering coefficient increases in a counterintuitive manner, suggesting fewer fluorescence artifacts from deep within the tissue in highly scattering media.

Revolutionizing Food Safety with Quantum Dot-Polymer Nanocomposites: From Monitoring to Sensing Applications

The present review article investigates the prospective utilisation of quantum dot-polymer nanocomposites in the context of ensuring food safety. The text pertains to the advancement of nanocomposites, encompassing their distinctive optical and electrical characteristics, and their prospective to transform the detection and perception of food safety risks. The article explores diverse methodologies for producing nanocomposites and underscores their potential utility in identifying impurities, microorganisms, and harmful substances in food. The article provides an overview of the challenges and limitations associated with the utilisation of nanocomposites in food safety applications, encompassing concerns regarding toxicity and the necessity for standardised protocols. The review article presents a comprehensive examination of the present research status in this area and underscores the potential of quantum dots-polymer nanocomposites in transforming food safety monitoring and sensing.

Prospects and Challenges of Synergistic Effect of Fluorescent Carbon Dots, Liposomes and Nanoliposomes for Theragnostic Applications

The future of molecular-level therapy, efficient medical diagnosis, and drug delivery relies on the effective theragnostic function which can be achieved by the synergistic effect of fluorescent carbon dots (FCDs) liposomes (L) and nanoliposomes. FCDs act as the excipient navigation agent while liposomes play the role of the problem-solving agent, thus the term "theragnostic" would describe the effect of LFCDs properly. Liposomes and FCDs share some excellent at-tributes such as being nontoxic and biodegradable and they can represent a potent delivery system for pharmaceutical compounds. They enhance the therapeutic efficacy of drugs via stabilizing the encapsulated material by circumventing barriers to cellular and tissue uptake. These agents facilitate long-term drug biodistribution to the intended locations of action while eliminating systemic side effects. This manuscript reviews recent progress with liposomes, nanoliposomes (collectively known as lipid vesicles) and fluorescent carbon dots, by exploring their key characteristics, applications, characterization, performance, and challenges. An extensive and intensive understanding of the synergistic interaction between liposomes and FCDs sets out a new research pathway to an efficient and theragnostic / theranostic drug delivery and targeting diseases such as cancer.

Design, Synthesis, and Biomedical Application of Multifunctional Fluorescent Polymer Nanomaterials

Luminescent polymer nanomaterials not only have the characteristics of various types of luminescent functional materials and a wide range of applications, but also have the characteristics of good biocompatibility and easy functionalization of polymer nanomaterials. They are widely used in biomedical fields such as bioimaging, biosensing, and drug delivery. Designing and constructing new controllable synthesis methods for multifunctional fluorescent polymer nanomaterials with good water solubility and excellent biocompatibility is of great significance. Exploring efficient functionalization methods for luminescent materials is still one of the core issues in the design and development of new fluorescent materials. With this in mind, this review first introduces the structures, properties, and synthetic methods regarding fluorescent polymeric nanomaterials. Then, the functionalization strategies of fluorescent polymer nanomaterials are summarized. In addition, the research progress of multifunctional fluorescent polymer nanomaterials for bioimaging is also discussed. Finally, the synthesis, development, and application fields of fluorescent polymeric nanomaterials, as well as the challenges and opportunities of structure-property correlations, are comprehensively summarized and the corresponding perspectives are well illustrated.

Multifunctional role of carbon dot-based polymer nanocomposites in biomedical applications: a review

Carbon-based 0D materials have shown tremendous potential in the development of biomedical applications of the next generation. The astounding results are primarily motivated by their distinctive nanoarchitecture and unique properties. Integrating these properties of 0D carbon nanomaterials into various polymer systems has orchestrated exceptional potential for their use in the development of sustainable and cutting-edge biomedical applications such as biosensors, bioimaging, biomimetic implants and many more. Specifically, carbon dots (CDs) have gained much attention in the development of biomedical devices due to their optoelectronic properties and scope of band manipulation upon surface revamping. The role of CDs in reinforcing various polymeric systems has been reviewed along with discussing unifying concepts of their mechanistic aspects. The study also discussed CDs optical properties via the quantum confinement effect and band gap transition which is further useful in various biomedical application studies.

Biomarker Detection in Early Diagnosis of Cancer: Recent Achievements in Point-of-Care Devices Based on Paper Microfluidics

Microfluidics is very crucial in lab-on-a-chip systems for carrying out operations in a large-scale laboratory environment on a single chip. Microfluidic systems are miniaturized devices in which the fluid behavior and control can be manipulated on a small platform, with surface forces on the platform being greater than volumetric forces depending on the test method used. In recent years, paper-based microfluidic analytical devices (μPADs) have been developed to be used in point-of-care (POC) technologies. μPADs have numerous advantages, including ease of use, low cost, capillary action liquid transfer without the need for power, the ability to store reagents in active form in the fiber network, and the capability to perform multiple tests using various measurement techniques. These benefits are critical in the advancement of paper-based microfluidics in the fields of disease diagnosis, drug application, and environment and food safety. Cancer is one of the most critical diseases for early detection all around the world. Detecting cancer-specific biomarkers provides significant data for both early diagnosis and controlling the disease progression. μPADs for cancer biomarker detection hold great promise for improving cure rates, quality of life, and minimizing treatment costs. Although various types of bioanalytical platforms are available for the detection of cancer biomarkers, there are limited studies and critical reviews on paper-based microfluidic platforms in the literature. Hence, this article aims to draw attention to these gaps in the literature as well as the features that future platforms should have.

A smart ratiometric fluoresence and colorimetry dual-responsive sensor for morin determination based on the complex between carbon quantum dots and polyethyleneimine

As a representative flavonoid, morin exhibits multi-biological activities, but its abuse endangers human health. Developing advanced technology for morin determination is urgently needed. In this study, a dual-responsive approach was reported for morin based on the complexing of carbon quantum dots (CQDs) and polyethyleneimine (PEI). The CQDs were fabricated via an improved hydrothermal method employing tyrosine and malic acid. Binding with PEI induced an 8-fold emission enhancement and a slight red-shift to 445 nm of CQDs because of the complexing of PEI and CQDs. Further morin introduction led to the blue emission (445 nm) quenching of CQDs-PEI and a yellow emission (560 nm) generation, which contributed a ratiometric fluorescence approach for morin determination between 2.0 and 32 μM, with a limit of detection (LOD) of 45 nM. Meanwhile, under sunlight the color of CQDs-PEI became yellow upon morin addition, which developed a colorimetric method for morin determination in a wide range between 2.0 and 100 μM (LOD = 69 nM). The developed dual-responsive method either displayed accurate results for morin in diluted human and bovine serum, being potential for actual sample analysis. Finally, a visual detection based on the smartphone was constructed and applied for the real-time determination of morin.

Image-guided drug delivery in nanosystem-based cancer therapies

The past decades have shown significant advancements in the development of solid tumor treatment. For instance, implementation of nanosystems for drug delivery has led to a reduction in side effects and improved delivery to the tumor region. However, clinical translation has faced challenges, as tumor drug levels are still considered to be inadequate. Interdisciplinary research has resulted in the development of more advanced drug delivery systems. These are coined "smart" due to the ability to be followed and actively manipulated in order to have better control over local drug release. Therefore, image-guided drug delivery can be a powerful strategy to improve drug activity at the target site. Being able to visualize the inflow of the administered smart nanosystem within the tumor gives the potential to determine the right moment to apply the facilitator to initiate drug release. Here we provide an overview of available nanosystems, imaging moieties, and imaging techniques. We discuss preclinical application of these smart drug delivery systems, the strength of image-guided drug delivery, and the future of personalized treatment.

Portable Plasmonic Paper-Based Biosensor for Simple and Rapid Indirect Detection of CEACAM5 Biomarker via Metal-Enhanced Fluorescence

Rapid, simple, and sensitive analysis of relevant proteins is crucial in many research areas, such as clinical diagnosis and biomarker detection. In particular, clinical data on cancer biomarkers show great promise in forming reliable predictions for early cancer diagnostics, although the current analytical systems are difficult to implement in regions of limited recourses. Paper-based biosensors, in particular, have recently received great interest because they meet the criteria for point-of-care (PoC) devices; the main drawbacks with these devices are the low sensitivity and efficiency in performing quantitative measurements. In this work, we design a low-cost paper-based nanosensor through plasmonic calligraphy by directly drawing individual plasmonic lines on filter paper using a ballpoint pen filled with gold nanorods (AuNR) as the colloidal ink. The plasmonic arrays were further successively coated with negatively and positively charged polyelectrolyte layers employed as dielectric spacers to promote the enhancement of the emission of carboxyl-functionalized quantum dots (QD)—previously conjugated with specific antibodies—for indirect detection of the carcinoembryonic antigen-related cell adhesion molecule 5 (CEACAM5). The efficiency, sensitivity, as well as the specificity of our portable nanosensor were validated by recording the luminescence of the QD@Ab complex when different concentrations of CEACAM5 were added dropwise onto the calligraphed plasmonic arrays.

New Advances in Lateral Flow Immunoassay (LFI) Technology for Food Safety Detection

With the continuous development of China’s economy and society, people and the government have higher and higher requirements for food safety. Testing for food dopants and toxins can prevent the occurrence of various adverse health phenomena in the world’s population. By deploying new and powerful sensors that enable rapid sensing processes, the food industry can help detect trace adulteration and toxic substances. At present, as a common food safety detection method, lateral flow immunochromatography (LFI) is widely used in food safety testing, environmental testing and clinical medical treatment because of its advantages of simplicity, speed, specificity and low cost, and plays a pivotal role in ensuring food safety. This paper mainly focuses on the application of lateral flow immunochromatography and new technologies combined with test strips in food safety detection, such as aptamers, surface-enhanced Raman spectroscopy, quantum dots, electrochemical test strip detection technology, biosensor test strip detection, etc. In addition, sensing principles such as fluorescence resonance energy transfer can also more effective. Different methods have different characteristics. The following is a review of the application of these technologies in food safety detection.

Folic Acid-Functionalized Graphene Quantum Dots: Synthesis, Characterization, Radiolabeling with Radium-223 and Antiviral Effect against Zika Virus Infection

The use of graphene quantum dots as biomedical devices and drug delivery systems has been increasing. The nano-platform of pure carbon has shown unique properties and is approved to be safe for human use. In this study, we successfully produced and characterized folic acid-functionalized graphene quantum dots (GQD-FA) to evaluate their antiviral activity against Zika virus (ZIKV) infection in vitro, and for radiolabeling with the alpha-particle emitting radionuclide radium-223. The in vitro results exhibited the low cytotoxicity of the nanoprobe GQD-FA in Vero E6 cells and the antiviral effect against replication of the ZIKV infection. In addition, our findings demonstrated that functionalization with folic acid doesn't improve the antiviral effect of graphene quantum dots against ZIVK replication in vitro. On the other hand, the radiolabeled nanoprobe ²²³Ra@GQD-FA was also produced as confirmed by the Energy Dispersive X-Ray Spectroscopy analysis. ²²³Ra@GQD-FA might expand the application of alpha targeted therapy using radium-223 in folate receptor-overexpressing tumors.

Study on Long-Term Tracing of Fibroblasts on Three-Dimensional Tissue Engineering Scaffolds Based on Graphene Quantum Dots

In order to find a convenient and stable way to trace human skin fibroblasts (HSFs) in three-dimensional tissue engineering scaffolds for a long time, in this experiment, Graphene Oxide Quantum Dots (GOQDs), Amino Graphene Quantum Dots (AGQDs) and Carboxyl Graphene Quantum Dots (CGQDs) were used as the material source for labeling HSFs. Exploring the possibility of using it as a long-term tracer of HSFs in three-dimensional tissue engineering scaffolds, the contents of the experiment are as follows: the HSFs were cultured in a cell-culture medium composed of three kinds of Graphene Quantum Dots for 24 h, respectively; (1) using Cell Counting Kit 8 (CCK8), Transwell migration chamber and Phalloidin-iFlior 488 to detect the effect of Graphene Quantum Dots on the biocompatibility of HSFs; (2) using a living cell workstation to detect the fluorescence labeling results of three kinds of Graphene Quantum Dots on HSFs, and testing the fluorescence attenuation of HSFs for 7 days; (3) the HSFs labeled with Graphene Quantum Dots were inoculated on the three-dimensional chitosan demethylcellulose sodium scaffold, and the living cell workstation was used to detect the spatial distribution of the HSFs on the three-dimensional scaffold through the fluorescence properties of the HSFs.. Experimental results: (1) the results of CCK8, Transwell migration, and FITC-Phalloidin cytoskeleton test showed that the three kinds of Graphene Quantum Dots had no effect on the biological properties of HSFs (p < 0.05); (2) the results of the fluorescence labeling experiment showed that only AGQDs could make HSFs fluorescent, and cells showed orange−red fluorescence; (3) the results of long-range tracing of HSFs which were labeled by with AGQDs showed that the fluorescence life of the HSFs were as long as 7 days; (4) The spatial distribution of HSFs can be detected on the three-dimensional scaffold based on their fluorescence properties, and the detection time can be up to 7 days.

Quantum dots: The cutting-edge nanotheranostics in brain cancer management

Quantum dots (QDs) are semiconductor nanocrystals possessing unique optoelectrical properties in that they can emit light energy of specific tunable wavelengths when excited by photons. They are gaining attention nowadays owing to their all-around ability to allow high-quality bio-imaging along with targeted drug delivery. The most lethal central nervous system (CNS) disorders are brain cancers or malignant brain tumors. CNS is guarded by the blood-brain barrier which poses a selective blockade toward drug delivery into the brain. QDs have displayed strong potential to deliver therapeutic agents into the brain successfully. Their bio-imaging capability due to photoluminescence and specific targeting ability through the attachment of ligand biomolecules make them preferable clinical tools for coming times. Biocompatible QDs are emerging as nanotheranostic tools to identify/diagnose and selectively kill cancer cells. The current review focuses on QDs and associated nanoformulations as potential futuristic clinical aids in the continuous battle against brain cancer.

A Brief Review of Carbon Dots-Silica Nanoparticles Synthesis and their Potential Use as Biosensing and Theragnostic Applications

Carbon dots (CDs) are carbon nanoparticles with sizes below 10 nm and have attracted attention due to their relatively low toxicity, great biocompatibility, water solubility, facile synthesis, and exceptional photoluminescence properties. Accordingly, CDs have been widely exploited in different sensing and biomedical applications, for example, metal sensing, catalysis, biosensing, bioimaging, drug and gene delivery, and theragnostic applications. Similarly, the well-known properties of silica, such as facile surface functionalization, good biocompatibility, high surface area, and tunable pore volume, have allowed the loading of diverse inorganic and organic moieties and nanoparticles, creating complex hybrid nanostructures that exploit distinct properties (optical, magnetic, metallic, mesoporous, etc.) for sensing, biosensing, bioimaging, diagnosis, and gene and drug delivery. In this context, CDs have been successfully grafted into diverse silica nanostructures through various synthesis methods (e.g., solgel chemistry, inverse microemulsion, surfactant templating, and molecular imprinting technology (MIT)), imparting hybrid nanostructures with multimodal properties for distinct objectives. This review discusses the recently employed synthesis methods for CDs and silica nanoparticles and their typical applications. Then, we focus on combined synthesis techniques of CD-silica nanostructures and their promising biosensing operations. Finally, we overview the most recent potential applications of these materials as innovative smart hybrid nanocarriers and theragnostic agents for the nanomedical field.

Recent Advances in Synthesis, Modification, Characterization, and Applications of Carbon Dots

Although there is significant progress in the research of carbon dots (CDs), some challenges such as difficulty in large-scale synthesis, complicated purification, low quantum yield, ambiguity in structure-property correlation, electronic structures, and photophysics are still major obstacles that hinder the commercial use of CDs. Recent advances in synthesis, modification, characterization, and applications of CDs are summarized in this review. We illustrate some examples to correlate process parameters, structures, compositions, properties, and performances of CDs-based materials. The advances in the synthesis approach, purification methods, and modification/doping methods for the synthesis of CDs are also presented. Moreover, some examples of the kilogram-scale fabrication of CDs are given. The properties and performance of CDs can be tuned by some synthesis parameters, such as the incubation time and precursor ratio, the laser pulse width, and the average molar mass of the polymeric precursor. Surface passivation also has a significant influence on the particle sizes of CDs. Moreover, some factors affect the properties and performance of CDs, such as the polarity-sensitive fluorescence effect and concentration-dependent multicolor luminescence, together with the size and surface states of CDs. The synchrotron near-edge X-ray absorption fine structure (NEXAFS) test has been proved to be a useful tool to explore the correlation among structural features, photophysics, and emission performance of CDs. Recent advances of CDs in bioimaging, sensing, therapy, energy, fertilizer, separation, security authentication, food packing, flame retardant, and co-catalyst for environmental remediation applications were reviewed in this article. Furthermore, the roles of CDs, doped CDs, and their composites in these applications were also demonstrated.

Recent Progress in Nanostructured Smart Drug Delivery Systems for Cancer Therapy: A Review

Traditional treatment approaches for cancer involve intravenous chemotherapy or other forms of drug delivery. These therapeutic measures suffer from several limitations such as nonspecific targeting, poor biodistribution, and buildup of drug resistances. However, significant technological advancements have been made in terms of superior modes of drug delivery over the last few decades. Technical capability in analyzing the molecular mechanisms of tumor biology, nanotechnology─particularly the development of biocompatible nanoparticles, surface modification techniques, microelectronics, and material sciences─has increased. As a result, a significant number of nanostructured carriers that can deliver drugs to specific cancerous sites with high efficiency have been developed. This particular maneuver that enables the introduction of a therapeutic nanostructured substance in the body by controlling the rate, time, and place is defined as the nanostructured drug delivery system (NDDS). Because of their versatility and ability to incorporate features such as specific targeting, water solubility, stability, biocompatibility, degradability, and ability to reverse drug resistance, they have attracted the interest of the scientific community, in general, and nanotechnologists as well as biomedical scientists. To keep pace with the rapid advancement of nanotechnology, specific technical aspects of the recent NDDSs and their prospects need to be reported coherently. To address these ongoing issues, this review article provides an overview of different NDDSs such as lipids, polymers, and inorganic nanoparticles. In addition, this review also reports the challenges of current NDDSs and points out the prospective research directions of these nanocarriers. From our focused review, we conclude that still now the most advanced and potent field of application for NDDSs is lipid-based, while other significantly potential fields include polymer-based and inorganic NDDSs. However, despite the promises, challenges remain in practical implementations of such NDDSs in terms of dosage and stability, and caution should be exercised regarding biocompatibility of materials. Considering these aspects objectively, this review on NDDSs will be particularly of interest for small-to-large scale industrial researchers and academicians with expertise in drug delivery, cancer research, and nanotechnology.