Degradation and inactivation of tetracycline by TiO2 photocatalysis

The construction of Z-scheme heterojunction ZnIn2S4@CuO with enhanced charge transfer capability and its mechanism study for the visible light degradation of tetracycline

In this study, copper oxide (CuO) was prepared by the microwave-assisted hydrothermal technique subsequently, CuO was grown in situ onto different rare metal compounds to prepare Z-scheme heterojunctions to improve the degradation efficiency of tetracycline (TC) in water environments. Various characterization proved the successful synthesis of all composite materials, and the formation of tight heterojunction interfaces, among which, the core-shell structure ZnIn2S4@CuO exhibited excellent photocatalytic degradation capability. Research results indicated that the degradation efficiency of ZnIn2S4@CuO for TC (50 mg/L) in the water environment reached 95.8 %, and the degradation rate is 2.41 times and 12.93 times that of CuO and ZnIn2S4 alone, respectively, the reason is because of the introduction of ZnIn2S4, Z-scheme heterojunction structures and internal electric field (IEF) is constructed and formed to extend the visible light response range of photocatalysts to improve electron-hole separation efficiency, and enhance charge transfer. In addition, ZnIn2S4@CuO-2 exhibited good stability and reproducibility, with no significant loss of activity after five cycles. Finally, the precise locations of free radical attack on TC were investigated by the combined use of high-resolution mass spectrometry (HR-MC) and frontier electron densities (FEDs), and a reasonable degradation pathway was provided. The results of this research provide a new and viable approach to overcome the limitations of conventional photocatalytic materials in terms of limited visible light absorption range and fast carrier recombination rates, which offers promising prospects for a wide range of applications in the field of wastewater purification.

Insightful properties-performance study of Ti-Cu-O heterojunction sonochemically embedded in mesoporous silica matrix for efficient tetracycline adsorption and photodegradation: RSM and ANN-based modeling and optimization

This study aims to provide a comprehensive evaluation of the photocatalytic properties and performance of the Cu-Ti-O heterojunction sonochemically embedded in the mesoporous silica matrix. Various characterization analyses and adsorption/photodegradation experiments were performed to assess the potential of the sample for tetracycline (TC) removal. The characterization results indicated that sonication contributes to better dispersion of Ti-Cu-O species, resulting in more uniform particle sizes, stronger semiconductors-silica interaction, and less agglomeration. Furthermore, sonication significantly affected the optical nanocomposite features, leading to an improvement in charge carrier separation and a decrease in the band gap of Ti-Cu-Si (S) by approximately 2.6 eV. Based on the textural results, the ultrasound microjets increased the surface area and pore volume, which facilitate mass transfer and provide suitable adsorption sites for TC molecules. Accordingly, Cu-Ti-Si (S) demonstrated higher adsorption capacity (0.051 g TC/g adsorbent) and eliminated TC significantly faster (0.0054 L.mg-1.min-1) than a non-sonicated sample during 120 min of irradiation, resulting in 2.84 times improvement in the constant rate. In addition, experimental results were accurately modeled using a central composite design in combination with response surface methodology (RSM) and artificial neural networks (ANN) to predict and optimize TC photodegradation. Both RSM and ANN models revealed excellent predictability for TC degradation efficiency, with R2 = 99.47 and 99.71%, respectively. At optimal operational conditions (CTC = 20 ppm, photocatalyst dosage = 1.15 g.L-1, pH = 9, and irradiation time = 100 min), more than 95% and 87% of TC were degraded within the UV (375 W) and simulated solar light (400 W) irradiation periods, respectively. It was observed that the Cu-Ti-Si (S) nanocomposite maintained remarkable stability after four cycles with only a negligible 3% loss of activity, owing to the superior interaction between the bimetallic heterojunction and the silica matrix.

Multi-antibiotics removal under UV-A light using sol-gel prepared TiO2: Central composite design, effect of persulfate addition and degradation pathway study

The removal of three antibiotics i.e., metronidazole (MNZ), ciprofloxacin (CIP) and tetracycline (TET), from aqueous system via TiO2 photocatalysis under UV-A light was investigated. Photocatalyst(s) were prepared using sol-gel method under different calcination temperatures (400-800 °C) and water-alcohol ratio. The spherical shaped catalyst (mean particle size ∼ 61 nm) was characterized via FTIR, XRD, BET, SEM, Raman, XPS, UV-DRS, and Fluorometry, and point of zero charge was also determined (pHPZC ∼ 6.6). Batch photo-catalytic degradation studies have shown complete degradation of MNZ, CIP and TET after 50, 75 and 20 min with a TOC removal of 37%, 44% and 31%, respectively. The activity of sol-gel prepared TiO2 was comparatively higher than commercially available pure anatase TiO2 nanoparticles due to lesser mean particle size. The ratio of water to alcohol in the preparation of TiO2 catalyst was found to have significant effect on antibiotic removal. Moreover, persulfate (PS) addition of 0.1 g/L amplified the pseudo-first-order removal-rate constant by 2.75, 3.3 and 1.6 times for MNZ, CIP and TET, respectively. The higher initial pH values (8 and 10) have shown the best removal efficiency for all antibiotics. Subsequently, central composite design (CCD) experiments were conducted under multi-antibiotic conditions. Near complete removal of all antibiotics were observed within 120 min. Scavenging studies revealed that hydroxyl and superoxide radicals play major roles in photo-catalytic degradation of MNZ, CIP and TET. During photocatalysis, MNZ degradation was initiated by hydroxylation reaction, CIP by piperazine ring opening by hydroxyl attack and TET by multiple hydroxylation process. Overall, TiO2 showed good efficiency at degrading multiple antibiotics and has the potential for practical application on a larger scale.

Strategic insight into enhanced photocatalytic remediation of pharmaceutical contaminants using spherical CdO nanoparticles in visible light region

The sustainable control of pharmaceutical micropollutants in water and wastewater environments is a great challenge in the 21st century. To address these issues, unique CdO nanoparticles (NPs) were synthesized using a facile hydrothermal approach and investigated for photocatalytic control of the antibiotic tetracycline, multidrug-resistant bacteria (MDRB), and total coliform in the wastewater effluent. The NPs were characterized using a range of techniques and it exhibited a spherical-like crystal structure with a mean size of 40 nm. The vibrational stretching mode of 1419 cm^-1 confirmed the formation of Cd-O (M - O). The synthesis protocol formed smoother surfaces and 1.88 eV band gap energy of CdO NPs, inducing excellent photocatalytic activity under visible LED light (blue and white) irradiation. The optimal catalyst dose and pH were 100 mg/L and 8-9, respectively. Blue light proved more effective than white light, resulting in 28% higher efficiency (93 ± 0.47%) in tetracycline degradation than white light under an identical intensity (20 mW/cm²). White light required a four-fold higher light intensity (80 mW/cm²) than blue light to induce comparable photocatalytic MDRB inactivation. Bacterial cell lysis by the photocatalytic treatment was confirmed by transmission electron microscopy (TEM). The used catalyst was easily recovered by 5 min of centrifugation and re-used without any noticeable change in the photocatalytic decomposition. The trapping experiment revealed that the CdO-based NPs contributed primarily to the generation of •O₂^- and •OH radicals (Type I), but the •O₂^- radicals were the dominant reactive oxygen species (ROS) in the photocatalytic process.

Nanomaterials as a Sustainable Choice for Treating Wastewater: A Review

The removal of dyes from textile effluents utilizing advanced wastewater treatment methods with high efficiency and low cost has received substantial attention due to the rise in pollutants in water. The purpose of this work is to give a comprehensive analysis of the different treatments for removing chemical dyes from textile effluents. The capability and potential of conventional treatments for the degradation of dyeing compounds in aqueous media, as well as the influence of multiple parameters, such as the pH solution, initial dye concentration, and adsorbent dose, are presented in this study. This study is an overview of the scientific research literature on this topic, including nanoreductive and nanophotocatalyst processes, as well as nanoadsorbents and nanomembranes. For the purpose of treating sewage, the special properties of nanoparticles are currently being carefully researched. The ability of nanomaterials to remove organic matter, fungus, and viruses from wastewater is another benefit. Nanomaterials are employed in advanced oxidation techniques to clean wastewater. Additionally, because of their small dimensions, nanoparticles have a wide effective area of contact. Due to this, nanoparticles' adsorption and reactivity are powerful. The improvement of nanomaterial technology will be beneficial for the treatment of wastewater. This report also offers a thorough review of the distinctive properties of nanomaterials used in wastewater treatment, as well as their appropriate application and future possibilities. Since only a few types of nanomaterials have been produced, it is also important to focus on their technological feasibility in addition to their economic feasibility. According to this study, nanoparticles (NPs) have a significant adsorption area, efficient chemical reactions, and electrical conductivity that help treat wastewater effectively.

Self-Assembly 2D Ti3C2/g-C3N4 MXene Heterojunction for Highly Efficient Photocatalytic Degradation of Tetracycline in Visible Wavelength Range

An ultrathin 2D Ti₃C₂/g-C₃N₄ MXene (2D-TC/CN) heterojunction was synthesized, using a facile self-assembly method; the perfect microscopic-morphology and the lattice structure presented in the sample with a 2 wt% content of Ti₃C₂ were observed by the field-emission scanning electron microscopy (SEM) and transmission electron microscope (TEM). The optimized sample (2-TC/CN) exhibited excellent performance in degrading the tetracycline (TC), and the degradation rate reached 93.93% in the conditions of 20 mg/L, 50 mL of tetracycline within 60 min. Except for the increased specific-surface area, investigated by UV-vis diffuse reflectance spectra (UV-vis DRS) and X-ray photoelectron microscopy (XPS) valence spectra, the significantly enhanced photocatalytic activity of the 2-TC/CN could also be ascribed to the formation of Ti-N bonds between Ti₃C₂ and g-C₃N₄ nanosheets, which reduced the width of the band gap through adjusting the position of the valence band, thus resulting in the broadened light-absorption. Furthermore, the facilitated electron transmission was also proved by time-resolved photoluminescence (TRPL) and electrochemical impedance spectroscopy (EIS), which is effective in improving the quantum efficiency of photo-generated electrons. In addition, the resulting radical-capture experiment suggested that superoxide radicals have the greatest influence on photodegradation performance, with the photodegradation rate of TC reducing from 93.16% to 32.08% after the capture of superoxide radicals, which can be attributed to the production of superoxide radicals only, by the 2-TC/CN composites with a high conduction-band value (-0.62 eV). These facilely designed 2D Ti₃C₂/g-C₃N₄ composites possess great application potential for the photodegradation of tetracycline and other antibiotics.

Visible-Light-Driven Photocatalytic Degradation of Tetracycline Using Heterostructured Cu2O-TiO2 Nanotubes, Kinetics, and Toxicity Evaluation of Degraded Products on Cell Lines

This study first reports on the tetracycline photodegradation with the synthesized heterostructured titanium oxide nanotubes coupled with cuprous oxide photocatalyst. The large surface area and more active sites on TiO₂ nanotubes with a reduced band gap (coupling of Cu₂O) provide faster photodegradation of tetracycline under visible light conditions. Cytotoxicity experiments performed on the RAW 264.7 (mouse macrophage) and THP-1 (human monocytes) cell lines of tetracycline and the photodegraded products of tetracycline as well as quenching experiments were also performed. The effects of different parameters like pH, photocatalyst loading concentration, cuprous oxide concentration, and tetracycline load on the photodegradation rate were investigated. With an enhanced surface area of nanotubes and a reduced band gap of 2.58 eV, 1.5 g/L concentration of 10% C-TAC showed the highest efficiency of visible-light-driven photodegradation (∼100% photodegradation rate in 60 min) of tetracycline at pH 5, 7, and 9. The photodegradation efficiency is not depleted up to five consecutive batch cycles. Quenching experiments confirmed that superoxide radicals and hydroxyl radicals are the most involved reactive species in the photodegradation of tetracycline, while valance band electrons are the least involved reactive species. The cytotoxicity percentage of tetracycline and its degraded products on RAW 264.7 (-0.932) as well as THP-1 (-0.931) showed a negative correlation with the degradation percentage with a p-value of 0.01. The toxicity-free effluent of photodegradation suggests the application of the synthesized photocatalyst in wastewater treatment.

Synthesis of Ag@AgCl/CA and Visible-Light Photocatalytic Degradation of Oxtetracycline

Chemical coupling, in-situ deposition of supported AgCl, and photoreduction were used to create Ag@AgCl/CA. The morphology, structure, and surface area of the prepared Ag@AgCl/CA were characterized by SEM, TEM, FT-IR, and BET. The photogenerated electron transport efficiency and visible light absorption were analyzed by photocurrent and electrochemical impedance spectroscopy (EIS), respectively. The surface electrical properties and degradation stability were evaluated by zeta potential measurement and cyclic catalytic degradation experiments, and the photocatalytic mechanism was proposed in detail based on the ESR test and trapping experiment. The results showed that the cluster of Ag@AgCl nanoparticles were distributed on the CA crosslinking structure. The prepared Ag@ AgCl/CA photocatalytic material has a high Zeta potential, stable photocurrent, and small photogenerated electron transfer resistance. It has good adsorption and photocatalytic degradation stability for OTC. The material has a relatively strong absorption in the visible light range. Temperature and initial pH had significant effects on the degradation of OTC by photocatalytic materials. The photocatalytic degradation rate was the highest at 40°C and pH6, and the photocatalytic degradation process conformed to the quasi-first-order reaction kinetics. Holes (h⁺) and superoxide radicals (·O₂－) were the main active species for the degradation of OTC.

Removal of veterinary antibiotics in swine wastewater using microalgae-based process

Phycoremediation of swine wastewater is an attractive treatment to remove contaminants and simultaneously produce valuable feedstock biomass. However, there is a lack of information about the application of phycoremediation on veterinary antibiotic removal. Thus, this research investigated the degradation of tetracycline, oxytetracycline, chlortetracycline and doxycycline in swine wastewater treated with phycoremediation. The tetracyclines degradation kinetics was adjusted to the pseudo-first-order kinetics model, with kinetic constant k₁ in the following: 0.36 > 0.27>0.19 > 0.18 (d^-1) for tetracycline, doxycycline, oxytetracycline and chlortetracycline, respectively. The maximum concentration of microalgae biomass (342.4 ± 20.3 mg L^-1) was obtained after 11 days of cultivation, when tetracycline was completely removed. Chlortetracycline concentration decreased, generating iso-chlortetracycline and 4-epi-iso-chlortetracycline. Microalgae biomass harvested after antibiotics removal presented a carbohydrate-rich content of 52.7 ± 8.1, 50.1 ± 3.3, 51.4 ± 5.4 and 57.4 ± 10.4 (%) when cultured with tetracycline, oxytetracycline, chlortetracycline and doxycycline, respectively, while the control culture without antibiotics presented a carbohydrate content of 40 ± 6.5%. These results indicate that could be a valuable source for bioenergy conversion.

UV/TiO2 Photocatalysis as an Efficient Livestock Wastewater Quaternary Treatment for Antibiotics Removal

Antibiotics are among the most common pharmaceutical compounds, and they have been extensively used for the prevention and treatment of bacterial diseases for more than 50 years. However, merely a small fraction of antibiotics is metabolized in the body, while the rest is discharged into the environment through excretion, which can cause potential ecological problems and human health risks. In this study, the elimination of seventeen antibiotics from real livestock wastewater effluents was investigated by UV/TiO2 advanced oxidation process. The effect of process parameters, such as TiO2 loadings, solution pHs, and antibiotic concentrations, on the efficiency of the UV/TiO2 process was assessed. The degradation efficiency was affected by the solution pH, and higher removal efficiency was observed at pH 5.8 and 9.9, while the catalyst loading had no significant effect on the degradation efficiency. UV photolysis showed a good removal efficiency of the antibiotics. However, the highest removal efficiency was shown by the UV/photocatalyst system due to their synergistic effects. The results showed that more than 90% of antibiotics were removed by UV/TiO2 system during the 60 min illumination, while the corresponding TOC and COD removal was only 10 and 13%, respectively. The results of the current study indicated that UV/TiO2 advanced oxidation processes is a promising method for the elimination of various types of antibiotics from real livestock wastewater effluents.

Photodegradation and ozonation of ibuprofen derivatives in the water environment: Kinetics approach and assessment of mineralization and biodegradability

This article presents the results of studies on the degradation of ibuprofen transformation products: 1-hydroxyibuprofen (1OHIBF), 4-ethylbenzaldehyde (4EBA), 1-[4-(2-methylpropyl)phenyl]ethan-1-ol (MPPE) in water. To the best of our knowledge, this is the first paper where the ozonation and photodegradation (VIS and UV photolysis, degradation in H₂O₂/UV system, photosensitized oxidation) of 1OHIBF, 4EBA and MPPE are reported. The processes were performed in demineralized and natural river water. The influence of various reaction parameters on the removal degree was checked. Both, photolysis under VIS light and photosensitized oxidation of target compounds are very low-efficient processes. Ozonation and degradation in H₂O₂/UV system are effective methods for ibuprofen derivatives degradation. Components present in river water reduced removal degree of investigated compounds during ozonation and degradation in H₂O₂/UV system. The biodegradability assessment using the Average Oxidation State (AOS) and COD/TOC ratio proved the formation of more oxidized by-products during both processes. The determined second-order rate constants for ozone reaction with 1OHIBF, 4EBA and MPPE are 0.1 ± 0.01, 10.95 ± 1.36 and 3.04 ± 0.33 M^-1 s^-1, respectively. The calculated reaction rate constants of hydroxyl radicals with MPPE, 4EBA and 1OHIBF are 3.57 × 10⁹, 6.83 × 10⁹ and 1.06 × 10⁹ M^-1 s^-1, respectively.

Nanophotocatalysis for the Removal of Pharmaceutical Residues from Water Bodies: State of Art and Recent Trends

Background:

The occurrence of pharmaceuticals in surface and drinking water is ubiquitous and is a major concern of researchers. These compounds cause a destructive impact on aquatic and terrestrial life forms, and the removal of these compounds from the environment is a challenging issue. Existent conventional wastewater treatment processes are generally inefficacious because of their low degradation efficiency and inadequate techniques associated with the disposal of adsorbed pollutants during comparatively effective methods like the adsorption process.

Remediation Method:

Semiconductor-mediated photocatalysis is an attractive technology for the efficient removal of pharmaceutical compounds. Among various semiconductors, TiO2 and ZnObased photocatalysts gained much interest during the last years because of their efficiency in decomposing and mineralizing the lethal organic pollutants with the utilization of UV-visible light. Incessant efforts are being undertaken for tuning the physicochemical, optical, and electronic properties of these photocatalysts to strengthen their overall photocatalytic performance with good recycling efficiency.

Results:

This review attempts to showcase the recent progress in the rational design and fabrication of nanosized TiO2 and ZnO photocatalysts for the removal of pollutants derived from the pharmaceutical industry and hospital wastes.

Conclusion:

Photocatalysis involving TiO2 and ZnO provides a positive impact on pollution management and could be successfully applied to remove pharmaceuticals from wastewater streams. Structure modifications, the introduction of heteroatoms, and the integration of polymers with these nano photocatalysts offer leapfrogging opportunities for broader applications in the field of photocatalysis.

Reactive species specific RhB assisted collective photocatalytic degradation of tetracycline antibiotics with triple-layer Aurivillius perovskites

Triple-layer Aurivillius perovskites degrade tetracycline antibiotic and rhodamine B together in acidic aqueous solution. Primarily the superoxide radical generated via a semiconductor assisted dye sensitization process degrades the tetracycline.

MOF-derived biochar composites for enhanced high performance photocatalytic degradation of tetracycline hydrochloride

Biochar reinforced advanced nanocomposites are of interest to a wide circle of researchers. Herein, we describe a novel MOF-derived reinforced cow dung biochar composite, which was prepared by a one-step hydrothermal method to form the MOF MIL-125(Ti) onto a nitrogen and sulfur co-doped bio-carbon (NSCDBC). The UV-vis diffuse reflectance spectrum of NSCDBC/MIL-125(Ti) exhibits an extension of light absorption in the visible region (360–800 nm), indicating its higher visible light capture capacity relative to pure MIL-125(Ti). The photocatalytic activity results show that all the NSCDBC/MIL-125(Ti) composite samples, namely NSCM-5, NSCM-10, NSCM-20 and NSCM-30 display good performance in the removal of tetracycline hydrochloride compared to pure MIL-125(Ti). Among them, NSCM-20 exhibits the highest catalytic activity with a removal rate of 94.62%, which is attributed to the excellent adsorption ability of NSCDBC and the ability to inhibit the complexation of photogenerated electron–hole pairs. Photoluminescence verifies that the loading of biochar successfully enhances the separation of photogenerated electron–hole pairs. Subsequently, the active species in the photocatalytic process are identified by using electron spin resonance spin-trap techniques and free radical trapping experiments. Finally, the possible reaction mechanism for the photocatalytic process is revealed. These results confirm that NSCDBC/MIL-125(Ti) is a potentially low-cost, green photocatalyst for water quality improvement.

Schematic diagram of fabricating process of NSCDBC/MIL-125(Ti).

Fast preparation of Fe3O4@polydopamine/Au for highly efficient degradation of tetracycline

This work reported the fast synthesis of magnetic polydopamine Au-Fenton catalyst (Fe₃O₄@PDA/Au) under UV irradiation at 365 nm. The microstructure of prepared nanocomposites was characterized by various techniques. The effects of several key factors (pH values, H₂O₂ content and TC concentration) of tetracycline (TC) degradation were evaluated. The results revealed that the TC and total organic carbon (TOC) removal rate reached up to 98.16% and 93.14% within 300 min under optimal conditions (pH 3, H₂O₂ 80 μL, TC concentration 20 mg/L). Besides, HO radicals were generated during the Fenton-like degradation process and the plausible degradation mechanism was discussed. Moreover, Fe₃O₄@PDA/Au catalyst retained excellent catalytic capacity (TC removal rate 96.94% and TOC removal rate 87.69%) and exhibited fantastic stability after six cycles. Moreover, metal ions leaching was evaluated (0.023 mg/L). Altogether, the novel Fe₃O₄@PDA/Au Fenton-like catalyst is highly promising for wastewater management.

Synthesis of Selected Mixed Oxide Materials with Tailored Photocatalytic Activity in the Degradation of Tetracycline

The elimination of antibiotics occurring in the natural environment has become a great challenge in recent years. Among other techniques, the photocatalytic degradation of this type of pollutant seems to be a promising approach. Thus, the search for new photoactive materials is currently of great importance. The present study concerns the sol–gel synthesis of mono, binary and ternary TiO₂-based materials, which are used as active photocatalysts. The main goal was to evaluate how the addition of selected components—zirconium dioxide (ZrO₂) and/or zinc oxide (ZnO)—during the synthesis of TiO₂-based materials and the temperature of thermal treatment affect the materials’ physicochemical and photocatalytic properties. The fabricated mixed oxide materials underwent detailed physicochemical analysis, utilizing scanning-electron microscopy (SEM), X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), energy-dispersive X-ray spectroscopy (EDS), low-temperature N₂ sorption (BET model), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). The synthesized mixed oxide materials were used as photocatalysts in the heterogeneous photodegradation of tetracycline (TC). The physicochemical properties of the fabricated photocatalysts, including morphology, crystalline and textural structure, as well as the pH of the reaction system in the photocatalytic tests, were taken into account in determining their photo-oxidation activity. LC–MS/MS analysis was used to identify the possible degradation products of the selected antibiotic.

Removal of Aniline and Benzothiazole Wastewaters Using an Efficient MnO2/GAC Catalyst in a Photocatalytic Fluidised Bed Reactor

This work presents an efficient method for treating industrial wastewater containing aniline and benzothiazole, which are refractory to conventional treatments. A combination of heterogeneous photocatalysis operating in a fluidised bed reactor is studied in order to increase mass transfer and reduce reaction times. This process uses a manganese dioxide catalyst supported on granular activated carbon with environmentally friendly characteristics. The manganese dioxide composite is prepared by hydrothermal synthesis on carbon Hydrodarco^® 3000 with different active phase ratios. The support, the metal oxide, and the composite are characterised by performing Brunauer, Emmett, and Teller analysis, transmission electron microscopy, X-ray diffraction analysis, X-ray fluorescence analysis, UV-Vis spectroscopy by diffuse reflectance, and Fourier transform infrared spectroscopy in order to evaluate the influence of the metal oxide on the activated carbon. A composite of MnO₂/GAC (3.78% in phase α-MnO₂) is obtained, with a 9.4% increase in the specific surface of the initial GAC and a 12.79 nm crystal size. The effect of pH and catalyst load is studied. At a pH of 9.0 and a dose of 0.9 g L^-1, a high degradation of aniline and benzothiazole is obtained, with an 81.63% TOC mineralisation in 64.8 min.

Modification of Ceramic Membranes with Carbon Compounds for Pharmaceutical Substances Removal from Water in a Filtration-Adsorption System

The aim of this work is to develop a new type of carbon-ceramic membranes for the removal of pharmaceutical substances from water. The membranes were prepared by the chemical modification method using an organosilicon precursor—octadecyltrichlorosilane (ODTS). Graphene oxide, multi-walled carbon nanotubes with carboxylic groups, and single-walled carbon nanotubes were used in the modification process. The filtration properties and adsorption properties of the developed membranes were tested. In order to characterize the membrane, the water permeability, the change of the permeate flux in time, and the adsorbed mass of the substance were determined. Additionally, the surface properties of the membranes were characterized by contact angle measurements and porosimetry. The antibiotic tetracycline was used in the adsorption tests. Based on the results, the improved adsorption properties of the modified membrane in relation to the unmodified membrane were noticed. Novel ceramic membranes modified with MWCNT are characterized by 45.4% removal of tetracycline and permeate flux of 520 L·h·m⁻²·bar⁻¹. We demonstrated the ability of modified membranes to adsorb pharmaceuticals from water streams that are in contact with the membrane. Novel membranes retain their filtration properties. Therefore, such membranes can be used in an integrated filtration–adsorption process.

Synthesis and Characterization of ZnBi2O4 Nanoparticles: Photocatalytic Performance for Antibiotic Removal under Different Light Sources

This work aims to synthesize a photocatalyst with high photocatalytic performances and explore the possibility of using it for antibiotic removal from wastewater. For that, the spinel ZnBi2O4 (ZBO) was produced with the co-precipitation method and its optical, dielectric, and electrochemical characteristics were studied. The phase has been determined and characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). For the ZBO morphology, a Scanning Electron Microscopy (SEM) has been used. Then, the optical and dielectric properties of ZBO have been evaluated by calculating refractive index n (λ), extinction coefficient (k), dissipation factor (tan δ), relaxation time (τ), and optical conductivity (σopt) using the spectral distribution of T(λ) and R(λ). An optical gap band of 2.8 eV was determined and confirmed. The electrochemical performance of ZBO was investigated and an n-type semiconductor with a flat band potential of 0.54 V_SCE was found. The photocatalytic efficiency of ZBO was investigated in order to degrade the antibiotic Cefixime (CFX) under different light source irradiations to exploit the optical properties. A high CFX degradation of approximately 89% was obtained under solar light (98 mW cm−2) only after 30 min, while 88% of CFX degradation efficiency has been reached after 2 h under UV irradiation (20 mW cm−2); this is in line with the finding of the optical characterizations. According to the obtained data, solar light assisted nanoparticle ZBO can be used successfully in wastewater to remove pharmaceutical products.

Antibiotic tetracycline enhanced the toxic potential of photo catalytically active P25 titanium dioxide nanoparticles towards freshwater algae Scenedesmus obliquus

Titanium dioxide nanoparticles (TiO₂ NPs) often co-exist with the other co-contaminants like antibiotics. The antibiotics can potentially modify the toxic effects of the co-contaminants like the NPs in the environment. Hence, the present study aims to understand the toxic potential of a binary mixture of tetracycline (TC) and TiO₂ NPs to a model freshwater alga - Scenedesmus obliquus. Since, TiO₂ NPs are known to be photo-catalytically active, non-irradiated (NI-TiO₂ NPs), UVA pre-irradiated (UVA-TiO₂ NPs), and UVB pre-irradiated (UVB-TiO₂ NPs) TiO₂ NPs was mixed separately with TC and their toxicity evaluated. It was observed that the cell viability for the three experimental groups decreased significantly (p < 0.001) with respect to the individual NPs-treated algae. Abbott's model suggested that the interaction between TC and Ni-TiO₂ NPs was additive for all the concentrations of NI-TiO₂ NPs tested. However, in the case of both the UV pre-irradiated NPs, the interaction was additive for the lower concentration (1.56 μM) and synergistic for both the higher concentrations (3.13, and 6.26 μM). At the concentrations tested the cell membrane damage and intracellular uptake of NPs increased significantly (p < 0.05) for the mixture in comparison with the individual NPs treated algae. This study suggested that even a non-lethal concentration of TC (EC₁₀ = 0.135 μM) increased the toxic potential of the TiO₂ NPs significantly and when this antibiotic was used in combination with the UV pre-irradiated NPs, toxicity even increased to a higher level.

UV treatment for degradation of chemical contaminants in food: A review

Application of ultraviolet (UV) irradiation for the degradation of chemical contaminants in food products has gained more and more interest in the past two decades. The majority of the research in this field was on mycotoxins, especially aflatoxins and patulin, with limited studies on pesticide residues and other chemical contaminants in food. These studies have been focused on identifying the structure and toxicity of degradation products, investigating the influence of UV treatment factors on the degradation efficiency, determining the impact of UV treatment on the quality of food products, and developing updated UV treatment methods such as TiO₂ induced photocatalytic degradation. The summary of published literatures provided insights into future research opportunities in this area, which include determining a standard for the UV treatment description, working with naturally contaminated samples rather than artificially spiked samples, conducting pilot plant or industrial scale studies, examining more targets and conducting multi-targets studies, and developing more innovative methods for UV treatment.

Removal of organic compounds from cooling tower blowdown by electrochemical oxidation: Role of electrodes and operational parameters

The reuse of cooling tower blowdown (CTBD) in the cooling tower itself requires CTBD deionization and a pre-treatment before deionization to remove organic compounds (OCs) that induce membrane fouling. This study assesses the potential of electrochemical oxidation (EO) with a boron-doped diamond (BDD) and a Ti/RuO₂ mixed-metal oxide (MMO) anode for CTBD pre-treatment. Also, the influence of the applied current density (j), initial pH, hydrodynamic conditions, and supporting electrolyte on the process performance was evaluated. Results show that COD and TOC removal were 85 and 51%, respectively, with the BDD-anode; however, they were 50 and 12% with MMO-anode at a j-value of 8.7 mA cm^-2 and neutral pH. An increased j-value increased the COD and TOC removal; however, different pHs, hydrodynamic conditions, and the addition of supporting electrolytes had a minor impact on the removal with both anodes. Liquid chromatography-organic carbon detection analysis showed that the OC in CTBD mainly consisted of humic substances (HS). EO with the BDD-anode resulted in 35% HS mineralization, while the rest of the HS were partially oxidized into low molecular weight compounds and building blocks. However, HS mineralization was limited with the MMO-anode. The mineralization and oxidation were accompanied by the formation of organic and inorganic chlorinated species. These species increased the toxicity to Vibrio fischeri 20-fold compared to the initially low-toxic CTBD. Thus, EO with a BDD-anode is a promising pre-treatment technology for the removal of OCs before CTBD deionization, but measures to minimize the chlorinated species formation are required before its application.

Degradation of Oxytetracycline in Aqueous Solutions: Application of Homogeneous and Heterogeneous Advanced Oxidative Processes

Oxytetracycline is one of the antibiotics most frequently used in the Shrimp Industry during the control of bacterial diseases. These emerging pollutants, which appear in low concentrations, are persistent and alternative treatments and are required for their elimination. The degradation of oxytetracycline was evaluated in an aqueous solution by applying homogeneous (UV/H2O2 and photo-Fenton) and heterogeneous (UV/TiO2/H2O2) advanced oxidative processes (AOPs). The studies were carried out using a bench reactor with short-wave ultraviolet lamps (UV-C). We quantified the extent to which the degradation of the drug had been efficient by employing highly efficient liquid chromatography (HPLC) and a PDA detector with a wavelength of 354 nm and a C18 column. The best results were obtained when applying the UV/H2O2 treatment, which attained a degradation of 97% under the initial conditions of a dose of 8 µL of H2O2 and 120 min of radiation. The pseudo-first order kinetic model proposed by Chan and Chu showed that the experimental results had an adequate fit, with values greater than R2 ≥ 0.95. Toxicity tests were applied to verify the effect of AOPs employed, when the drug was present in low concentrations. The test results demonstrated a decrease in the root growth of the species Lactuca sativa and Daucus carota.

Fe3O4 accelerates tetracycline degradation during anaerobic digestion: Synergistic role of adsorption and microbial metabolism

Antibiotics contaminants, for example, tetracycline (TC) in the environment have attracted extensive attention around the world, and appropriate treatments for such contaminants are urgently required. In this study, five groups of anaerobic reactors supplemented with different amounts of Fe₃O₄ were operated periodically to investigate their performance on TC removal. The results showed that Fe₃O₄ effectively promoted TC removal. Compared with the control reactor, the TC removal efficiency was increased by 7.3% when co-digested with glucose, and increased by 40.4% when mono TC was digested in reactors with 5.0 g/L Fe₃O₄. Further analysis indicated that the probable mechanism of Fe₃O₄ promoting TC removal was through TC being adsorbed from the liquid onto Fe₃O₄, making TC more available for microbes to be biodegraded. Microbial community analysis indicated that the bacteria (Klebsiella, Pseudomonas, and Escherichia) related to TC removal were enriched, which meant more pathways for TC removal were available following the addition of Fe₃O₄. In addition, in the Fe₃O₄-supplemented reactors, syntrophic metabolism (between Desulfovibrio and Methanobacterium, Azonexus and Methanobacterium) were possibly established, which played an important role in improving TC removal and CH₄ production. The electron transport system data further confirmed these results. The functional gene classification for Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis demonstrated that the dominant functions enhanced by Fe₃O₄ supplementation was microbial metabolic activities.

Effect of temperature and ultraviolet light on the bacterial kill effectiveness of antibiotic-infused 3D printed implants

Drug eluting 3D printed polymeric implants have great potential in orthopaedic applications since they are relatively inexpensive and can be designed to be patient specific thereby providing quality care. Fused Deposition Modeling (FDM) and Stereolithography (SLA) are among the most popular techniques available to print such polymeric implants. These techniques facilitate introducing antibiotics into the material at microscales during the manufacturing stage and subsequently, the printed implants can be engineered to release drugs in a controlled manner. However, FDM uses high temperature to melt the filament as it passes through the nozzle and SLA relies on exposure to nanoscale wavelength ultraviolet (UV) light which can adversely affect the anti-bacterial effectiveness of the antibiotics. The focus of this article is two-fold: i) Examine the effect of high temperature on the bacterial kill-effectiveness of eluted antibiotics through Polycaprolactone (PCL) based femoral implants and ii) Examine the effect of exposure to ultraviolet (UV) light on the bacterial kill-effectiveness of eluted antibiotics through femoral implants made up of a composite resin with various weight fractions of Polyethylene Glycol (PEG) and Polyethylene Glycol Diacrylate (PEGDA). Results indicate that even after exposing doxycycline, vancomycin and cefazolin at different temperatures between 20^oC and 230^oC, the antibiotics did not lose their effectiveness (kill radius of at least 0.85 cm). For doxycycline infused implants exposed to UV light, it was seen that a resin with 20 % PEGDA and 80 % PEG had the highest efficacy (1.8 cm of kill radius) and the lowest efficacy was found in an implant with 100 % PEGDA (1.2 cm of kill radius).

Catalytic ozonation of textile wastewater as a polishing step after industrial scale electrocoagulation

The main objective of this study was to develop the treatment system to change wastewater into a reliable source of recyclable water within the textile plant. Therefore, a highly polluted industrial wastewater originated in the dyeing of cotton was subjected to a multi-step treatment. The raw wastewater was characterized by the concentration of Reactive Black 5, the azo dye, as high as 842 mg/L, extreme alkalinity (pH 11.26) and salinity (NaCl concentration 52,290 mg/L). Correspondingly, the chemical oxygen demand (COD) was equal to 3440 mg/L and the total organic carbon (TOC) was 1790 mg/L in this wastewater. This salty, hardly degradable wastewater underwent the electrocoagulation (EC) on an industrial scale in the first step of the treatment. Although the industrial EC resulted in 84% of color removal in a very short time of 8 min, the wastewater was still characterized by an extremally high absorbance which corresponded to 100 mg/L of RB5. Moreover, EC resulted in the occurrence of burdensome by-products, of which one was identified in this study as an aniline derivative. The by-products contributed to high residual COD and TOC after EC (2120 mg/L and 1052 mg/L, respectively). Consequently, the catalytic ozonation was used by us as a second, the polishing, step of the treatment. The catalytic ozonation was found efficient in the removal of the residual color and colorless by-products. The wastewater after catalytic ozonation was colorless and the final COD and TOC decreased to 1283 and 695 mg/L, respectively. The average oxidation state (AOS), spectra analysis, and the toxicity assay showed catalytic ozonation efficient in the by-products oxidation. Consequently, the catalytic action of activated carbon (AC) was proved for the ozonation of textile wastewater. Ultimately, the recycling of purified wastewater into dyeing resulted in a very good color quality of textile samples (DE_CMC values below limiting value equal to 1.0).

Tetracycline Photocatalytic Degradation under CdS Treatment

Industrialization and the growing consumption of medicines leads to global aquatic contamination. One of the antibiotics widely used against bacterial infections in both human and veterinary medicine is tetracycline. Despite its positive antibiotic action, tetracycline is resistant against degradation, and therefore it accumulates in the environment, including the aquatic environment, creating great health hazards, possibly stimulating antibiotic resistance of pathogenic organisms. In this research, aqueous suspensions of semiconductor nanoparticles CdS were used for photocatalytic activity studies in the presence of methylene blue as a model compound, and finally, in the presence of tetracycline, a broad-spectrum antibiotic widely used against bacterial infections, as well as a live-stock food additive. The mechanism and kinetic rate constants of photocatalytic degradation processes of methylene blue and tetracycline were described in correlation with the energy diagram of CdS nanoparticles.

UV/Vis Light Induced Degradation of Oxytetracycline Hydrochloride Mediated byCo-TiO2 Nanoparticles

Pharmaceuticals, especially antibiotics, constitute an important group of aquatic contaminants given their environmental impact. Specifically, tetracycline antibiotics (TCs) are produced in great amounts for the treatment of bacterial infections in both human and veterinary medicine. Several studies have shown that, among all antibiotics, oxytetracycline hydrochloride (OTC HCl) is one of the most frequently detected TCs in soil and surface water. The results of the photocatalytic degradation of OTC HCL in aqueous suspensions (30 mg·L⁻¹) of 0.5 wt.% cobalt-doped TiO₂ catalysts are reported in this study. The heterogeneous Co-TiO₂ photocatalysts were synthesized by two different solvothermal methods. Evonik Degussa Aevoxide P25 and self-prepared TiO₂ modified by the same methods were used for comparison. The synthesized photocatalysts were characterized by X-ray powder diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), UV/vis diffuse reflectance spectroscopy (DRS), and N₂ adsorption (BET) for specific surface area determination. The XRD and Raman results suggest that Ti⁴⁺ was substituted by Co²⁺ in the TiO₂ crystal structure. Uv/visible spectroscopy of Co-TiO₂-R showed a substantial redshift in comparison with bare TiO₂-R. The photocatalytic performance of the prepared photocatalysts in OTC HCL degradation was investigated employing Uv/vis spectroscopy and high-performance liquid chromatography (HPLC). The observed initial reaction rate over Co-TiO₂-R was higher compared with that of Co-TiO₂-HT, self-prepared TiO₂, and the commercial P25. The enhanced photocatalytic activity was attributed to the high surface area (153 m²·g⁻¹) along with the impurity levels within the band gap (2.93 eV), promoting the charge separation and improving the charge transfer ability. From these experimental results, it can be concluded that Co-doping under reflux demonstrates better photocatalytic performances than with the hydrothermal treatment.

Nitrogen deficient carbon nitride for efficient visible light driven tetracycline degradation: a combination of experimental and DFT studies

The narrow visible-light absorption range and a high recombination rate of photo-excited electrons and holes are the main reasons for the confined photocatalytic performance of graphitic carbon nitride (g-C₃N₄).

Single-component and competitive adsorption of tetracycline and Zn(ii) on an NH4Cl-induced magnetic ultra-fine buckwheat peel powder biochar from water: studies on the kinetics, isotherms, and mechanism

Single-component and competitive adsorption of tetracycline (TC) and Zn(ii) on an NH₄Cl-induced magnetic ultra-fine buckwheat peel powder biochar (NH₄Cl-BHP-char/Fe₃O₄) was investigated in batch experiments.

Nanoformulation of C-18 long fatty acid-capped silver nanoparticles with exploration of photocatalytic and antibacterial activities

C-18 fatty acid-coated silver nanoparticles are synthesized using a facile and worthwhile chemical method.

Preparation of Hollow Flower-Like Microspherical β-Bi2O3/BiOCl Heterojunction and High Photocatalytic Property for Tetracycline Hydrochloride Degradation

Tetracycline cannot be effectively degraded in wastewater treatment. Therefore, the development of excellent photocatalysts is of significant importance for environmental protection. In this study, a β-Bi₂O₃/BiOCl heterojunction photocatalyst with hollow flower-like microspheres was successfully synthesized by the in-situ reaction of HCl and β-Bi₂O₃ hollow spheres. The prepared samples are characterized by Scanning electron microscopy, Transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, N₂ physical adsorption, UV-vis diffuse reflectance spectroscopy, and Photoluminescence. Then, research on the photocatalytic performance for the degradation of tetracycline hydrochloride was conducted. The results show that the photocatalytic performance of the β-Bi₂O₃/BiOCl composite is significantly better than the β-Bi₂O₃ and BiOCl. The increase in photocatalytic activity is due to the formation of a heterojunction between β-Bi₂O₃ and BiOCl, which effectively promotes the separation of photogenerated electron-hole pairs. Additionally, the heterojunction nanocomposite demonstrated the outstanding photocatalytic stability after five cycles, which indicates that the material can be used for water environment purification. This paper provides assistance for studying the photocatalytic mechanism of heterojunction photocatalytic materials.

CuInS2/Mg(OH)2 Nanosheets for the Enhanced Visible-Light Photocatalytic Degradation of Tetracycline

CuInS₂/Mg(OH)₂ (CIS/Mg(OH)₂) nanosheets have been prepared for the visible light activated photodegradation of tetracycline hydrochloride (TCH). The introduction of CuInS₂ has proven to enhance the photocatalytic activity of Mg(OH)₂ nanosheets. It’s ascribed to the enhanced transfer and separation of charge carriers at the junction interface between CuInS₂ and Mg(OH)₂. The photocatalytic activity of obtained CIS/Mg(OH)₂ is greatly affected by CuInS₂ content, pH value, and inorganic ions. Among these samples, 2-CIS/Mg(OH)₂ exhibits the excellent photocatalytic activity and durability for the visible light driven removal of TCH after five cycle times. Atomic force microscope (AFM) images indicate that the surface roughness of 2-CIS/Mg(OH)₂ is intensively influenced in adsorption-photocatalysis process. The •O₂⁻ and •OH radicals are vital for the visible light driven photocatalytic activity of 2-CIS/Mg(OH)₂ for TCH removal.