Anchoring nZVI on metal-organic framework for removal of uranium(Ⅵ) from aqueous solution

Controllable integration of nano zero-valent iron into MOFs with different structures for the purification of hexavalent chromium-contaminated water: Combined insights of scavenging performance and potential mechanism investigations

This work combined the stability of the porous structure of metal-organic frameworks with the strong reducibility of nano zero-valent iron, for the controllable integration of NZVI into MOFs to utilize the advantages of each component with enhancing the rapid decontamination and scavenging of Cr(VI) from wastewater. Hence, four kinds of MOFs/NZVI composites namely ZIF67/NZVI, MOF74/NZVI, MIL101(Fe)/NZVI, CuBTC/NZVI, were prepared for Cr(VI) capture. The results indicated that the stable structure of ZIF67, MOF74, MIL101(Fe), CuBTC, was beneficial for the dispersion of NZVI that could help more close contact between MOFs/NZVI reactive sites and Cr(VI), subsequently, MOFs/NZVI was proved to be better scavengers for Cr(VI) scavenging than NZVI alone. The Cr(VI) capture achieved the maximum adsorption capacity at pH ~ 4.0, which might be due to the participation of more H+ in the reaction and better corrosion of NZVI at lower pH. Mechanism investigation demonstrated synergy of adsorption, reduction and surface precipitation resulted in enhanced Cr(VI) scavenging, and Fe(0), dissolved and surface-bound Fe(II) were the primary reducing species. The findings of this investigation indicated that the as-prepared composites of ZIF67/NZVI, MOF74/NZVI, MIL101(Fe)/NZVI, CuBTC/NZVI, with high oxidation resistance and excellent reactivity, could provide reference for the decontamination and purification of actual Cr(VI)-containing wastewater.

Enhancement of norfloxacin degradation by citrate in S-nZVI@Ps system: Chelation and FeS layer

The degradation of organic pollution by sulfur-modified nano zero-valent iron(S-nZVI) combined with advanced oxidation systems has been extensively studied. However, the low utilization of nZVI and low reactive oxygen species (ROS) yield in the system have limited its wide application. Herein, a natural organic acid commonly found in citrus fruits, citric acid (CA), was combined with the conventional S-nZVI@Ps system to enhance the degradation of norfloxacin (NOR). The addition of CA increased the NOR removal by about 31% compared with the conventional S-nZVI@Ps system under the same experimental conditions. Among them, the enhanced effect of CA is mainly reflected in its ability to promote the release of Fe2+ and accelerate the cycling of Fe2+ and Fe3+ to further improve the utilization of nZVI and the generation of ROS; it also promotes the dissolution of the active substance (FeS) on the surface of S-nZVI to further improve the degradation rate of NOR. More importantly, the chelate of CA and Fe2+ (CA-Fe2+) had higher reactivity than alone Fe2+. Free radical quenching and electron spin resonance (ESR) experiments indicated that the main ROS for the degradation of NOR in the CA/S-nZVI@Ps system were SO4•- and OH•. CA-bound sulfur-modifying effects on NOR degradation was systematically investigated, and the degradation mechanism of NOR in CA/S-nZVI@Ps system was explored by various techniques. Additionally, the effect of common anions in water matrix on the degradation of NOR in CA/S-nZVI@Ps system and its degradation of various pollutants were also studied. This study provides a new perspective to enhance the degradation of pollutants by S-nZVI combined with advanced oxidation system, which can help to solve the application boundary problem of S-nZVI.

Recent trends in wastewater treatment by using metal-organic frameworks (MOFs) and their composites: A critical view-point

Respecting the basic need of clean and safe water on earth for every individual, it is necessary to take auspicious steps for waste-water treatment. Recently, metal-organic frameworks (MOFs) are considered as promising material because of their intrinsic features including the porosity and high surface area. Further, structural tunability of MOFs by following the principles of reticular chemistry, the MOFs can be functionalized for the high adsorption performance as well as adsorptive removal of target materials. However, there are still some major concerns associated with MOFs limiting their commercialization as promising adsorbents for waste-water treatment. The cost, toxicity and regenerability are the major issues to be addressed for MOFs to get insightful results. In this article, we have concise the current strategies to enhance the adsorption capacity of MOFs during the water-treatment for the removal of toxic dyes, pharmaceuticals, and heavy metals. Further, we have also discussed the role of metallic nodes, linkers and associated functional groups for effective removal of toxic water pollutants. In addition to conformist overview, we have critically analyzed the MOFs as adsorbents in terms of toxicity, cost and regenerability. These factors are utmost important to address before commercialization of MOFs as adsorbents for water-treatment. Finally, some future perspectives are discussed to give directions for potential research.

Emerging iron-based mesoporous materials for adsorptive removal of pollutants: Mechanism, optimization, challenges, and future perspective

Iron-based materials (IBMs) have shown promise as adsorbents due to their unique physicochemical properties. This review provides an overview of the different types of IBMs, their synthesis methods, and their properties. Results found in the adsorption of emerging contaminants to a wide range of IBMs are discussed. The IBMs used were evaluated in terms of their maximum uptake capacity, with special consideration given to environmental conditions such as contact time, solution pH, initial pollutant concentration, etc. The adsorption mechanisms of pollutants are discussed taking into account the results of kinetic, isotherm, thermodynamic studies, surface complexation modelling (SCM), and available spectroscopic data. A current overview of molecular modeling and simulation studies related to density functional theory (DFT), surface response methodology (RSM), and artificial neural network (ANN) is presented. In addition, the reusability and suitability of IBMs in real wastewater treatment is shown. The review concludes with the strengths and weaknesses of current research and suggests ideas for future research that will improve our ability to remove contaminants from real wastewater streams.

Construction of urchin-like core-shell Fe/Fe2O3@UiO-66 hybrid for effective tetracycline reduction and photocatalytic oxidation

Although Fe/Fe2O3 has potential application compared with nanoscale zero-valent iron (nZVI), its smooth structure largely limits the catalytic performance. To address this challenge, we innovatively constructed highly efficient composite Fe/Fe2O3@UiO-66 via employing an urchin-like core-shell structure of Fe/Fe2O3 onto UiO-66 through a facile ion exchange precipitation method without inert gas protection. The characterization results show the urchin-like core-shell configuration can extend the life span of Fe0 and produce more active sites. Besides, the absorption spectrum is broadened by Fe2O3 which has narrow band gap and the high-efficiency separation of photogenerated electron-hole pairs is obtained with the load of Fe/Fe2O3. Moreover, Two-parameter pseudo-first-order decay model fits well with the reduction and adsorption of composites in the dark reaction, and a plausible pathway for tetracycline (TC) degradation is also proposed. The findings of this research provide a promising method for promoting the catalytic properties of MOF-based materials and Fe/Fe2O3.

Significance of MOF adsorbents in uranium remediation from water

Uranium is considered as one of the most perilous radioactive contaminants in the aqueous environment. It has shown detrimental effects on both flora and fauna and because of its toxicities on human beings, therefore its exclusion from the aqueous environment is very essential. The utilization of metal-organic frameworks (MOFs) as an adsorbent for the removal of uranium from the aqueous environment could be a good approach. MOFs possess unique properties like high surface area, high porosity, adjustable pore size, etc. This makes them promising adsorbents for the removal of uranium from contaminated water. In this paper, sources of uranium in the water environment, human health disorders, and application of the different types of MOFs as well as the mechanisms of uranium removal have been discussed meticulously.

Recent advancement in nanomaterials for the detection and removal of uranium: A review

Uranyl ions U(VI), are the common by-product of nuclear power plants and anthropogenic activities like mining, excess utilization of fertilizers, oil industries, etc. Its intake into the body causes serious health concerns such as liver toxicity, brain damage, DNA damage and reproductive issues. Therefore, there is urgent need to develop the detection and remediation strategies. Nanomaterials (NMs), due to their unique physiochemical properties including very high specific area, tiny sizes, quantum effects, high chemical reactivity and selectivity have become emerging materials for the detection and remediation of these radioactive wastes. Therefore, the current study aims to provide a holistic view and investigation of these new emerging NMs that are effective for the detection and removal of Uranium including metal nanoparticles, carbon-based NMs, nanosized metal oxides, metal sulfides, metal-organic frameworks, cellulose NMs, metal carbides/nitrides, and carbon dots (CDs). Along with this, the production status, and its contamination data in food, water, and soil samples all across the world are also complied in this work.

Low-temperature plasma induced phosphate groups onto coffee residue-derived porous carbon for efficient U(VI) extraction

For the continuous utilization of nuclear energy and efficient control of radioactive pollution, low-cost materials with high efficient U(VI) removal are of great importance. In this study, low temperature plasma method was applied for the successful modification of O-phosphorylethanolamine (O-PEA) on the porous carbon materials. The produced materials (Cafe/O-PEA) could adsorb U(VI) efficiently with the maximum sorption capacity of 648.54 mg/g at 1 hr, T=298 K, and pH=6.0, much higher than those of most carbon-based composites. U(VI) sorption was mainly controlled by strong surface complexation. From FTIR, SEM-EDS and XPS analyses, the sorption of U(VI) was related to the complexation with -NH₂, phosphate and -OH groups on Cafe/O-PEA. The low temperature plasma method was an efficient, environmentally friendly and low-cost method for surface modification of materials for the effective enrichment of U(VI) from aqueous solutions.

A critical review of uranium contamination in groundwater: Treatment and sludge disposal

Dissolved uranium in groundwater at high concentrations is an emerging global threat to human and ecological health due to its radioactivity and chemical toxicity. Uranium can enter groundwater by geochemical reactions, natural deposition from minerals, mining, uranium ore processing, and spent fuel disposal. Although much progress has been made in uranium remediation in recent years, most published reviews on uranium treatment have focused on specific methods, particularly adsorption. This article systematically reviews the major treatment technologies, explains their mechanism and progress of uranium removal, and compares their performance under various environmental conditions. Of all treatment methods, adsorption has received much attention due to its ease of use and adaptability under various conditions. However, salinity and competition from other ions limit its application in actual field conditions. Biosorption and bioremediation are also promising methods due to their low-cost and chemical-free operation. Strong base anion exchange resins are more effective at typical groundwater pH conditions. Advanced oxidation processes like photocatalysis produce less sludge and are effective even at low uranium concentrations. Electrocoagulation shows significantly improved performance when organic ligands are added prior to treatment. The significant advantages of membrane filtration are high removal efficiency and the ability to recover uranium. While each technology has its merits and demerits, no single technology is entirely suitable under all conditions. One major area of concern with all technologies is the need to dispose of liquid and solid waste generated after treatment safely. Future research must focus on developing hybrid and state-of-the-art technologies for effective and sustainable uranium removal from groundwater. Developing holistic management strategies for uranium removal will hinge on understanding its speciation, mechanisms of fate and transport, and socio-economic conditions of the affected areas.

Applications of Metal-Organic Frameworks in Water Treatment: A Review

The ever-expanding scale of industry and agriculture has led to the gradual increase of pollutants (e.g., heavy metal ions, synthetic dyes, and antibiotics) in water resources, and the ecology and wastewater are grave problems that need to be solved urgently and has attracted widespread attention from the research community and industry in recent years. Metal-organic frameworks (MOFs) are a type of organic-inorganic hybrid material with a distinctive 3D network crystal structure. Lately, MOFs have made striking progress in the fields of adsorption, catalytic degradation, and biomedicine on account of their large specific surface and well-developed pore structure. This review summarizes the latest research achievements in the preparation of pristine MOFs, MOF composites, and MOF derivatives for various applications including the removal of heavy metal ions, organic dyes, and other harmful substances in sewage. Furthermore, the working mechanisms of utilizing adsorption, photocatalytic degradation, and membrane separation technologies are also briefly described for specific pollutants removal from sewage. It is expected that this review will provide inspiration and references for the synthesis of pristine MOFs as well as their composites and derivatives with excellent water treatment performance.

Removal of organic compounds by nanoscale zero-valent iron and its composites

During the latest several decades, the continuous development of the economy and industry has brought more and more serious organic pollutants to the natural environment, which have inevitably aroused severe menace to human health and the environmental system. The nano zero-valent iron (NZVI) particles and NZVI-based materials have widely applied to remove organic pollutants. This article reviews the key advancements of different methods for the synthesis of NZVI and NZVI-based materials. Different modification methods (e.g., doped NZVI, encapsulated NZVI and supported NZVI) are also introduced detailedly for overcoming the defects of NZVI such as aggregation and easy oxidation. The removal of different organic pollutants including dyes, halogenated organic compounds, nitro-organic compounds, phenolic compounds, pesticides, and antibiotics are summarized. The interaction mechanisms, including adsorption, reduction, and active oxidation of organic pollutants by NZVI/NZVI-based composites, are discussed. The dyes are mainly removed by destroying their chromogenic group according to the reduction or the Fenton-like reaction with NZVI. The removal of halogenated organic compounds (HOCs) is realized by the dehalogenation process, including reductive elimination, hydrogenolysis, and hydrogenation. As for the nitro-organic compounds, three different reduction pathways as nitro-reduction (into amino), cleavage at the carbon‑nitrogen bond or denitration of the NO₂ group may take effect. The phenolic compounds can be mineralized into inorganic molecules, including CO₂ and H₂O, by Fenton oxidation. This review might provide the basis for future studies on developing more effective NZVI-based materials for the treatment of wastewaters contaminated by organic pollutants.

Environmental application of emerging zero-valent iron-based materials on removal of radionuclides from the wastewater: A review

Owing to high surface energy, strong chemical reactivity and large surface area, nanoscale zero-valent iron (nZVI) as a novel emerging material has been extensively utilized in environmental cleanup. Although a lot of reviews regarding the removal of organic contaminants and heavy metals on nZVI are summarized in recent years, the advanced progress concerning the removal of radionuclides on nZVI is still scarce. In this review, we summarized the removal of technetium (Tc), uranium (U), selenium (Se) and other radionuclides on nZVI and nZVI-based composites, then their interaction mechanisms were reviewed in details. This review is crucial for the environmental chemist and material engineer to exploit the actual application of nZVI-based composites as the emerging materials of permeable reactive barrier on the removal of radionuclides from aqueous solutions.

Investigation of a modified metal-organic framework UiO-66 with nanoscale zero-valent iron for removal of uranium (VI) from aqueous solution

A novel composite material (nZVI/UiO-66) of nanoscale zero-valent iron (nZVI) with a functionalized metal-organic framework was synthesized by this study via a coprecipitation method, which was used for the efficient removal of U(VI) in the aqueous solution. The nZVI/UiO-66 had an excellent removal capacity of 404.86 mg g^-1 with an initial U(VI) concentration of 80 mg L^-1, 313 K and pH = 6. The transmission electron microscopy (TEM) revealed that nZVI particles were inhomogeneously distributed on the surface of UiO-66. The analysis by the X-ray diffraction (XRD) has further illustrated that the introduction of nZVI did not change the structure of UiO-66. The adsorption process closely followed the pseudo-second-order kinetic and the Freundlich isotherm model. The removal process of U(VI) by nZVI/UiO-66 was spontaneous and endothermic. Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses have illustrated that the mechanism was mainly related to adsorption of U(VI) from UiO-66 and reduction of U(VI) by nZVI. The Zr-O bonds were shown to play a vital role in the uranium removal. nZVI/UiO-66 could be recycled. The uptake rate could be maintained at around 80% after 5 cycles of use. Therefore, these results manifested that the nZVI/UiO-66 is a promising sorbent for the efficient and selective removal of U(VI) in radioactive wastewaters.

Enhancing Cr(VI) reduction and immobilization by magnetic core-shell structured NZVI@MOF derivative hybrids

Hexavalent chromium (Cr(VI)) has significantly threatened the environmental health because of its distinct toxicity. A novel magnetic core-shell structured NZVI@ZD composite was designed for simultaneous adsorption and reduction of Cr(VI). NZVI@ZD was synthesized by carbonization of the as-prepared core-shell structure NZVI@zeolitic imidazole framework-67 (ZIF-67). After carbonization, the original ZIF-67 shell shape was preserved well with marginal parts developing to graphitized carbon. Both cobalt (Co) and NZVI nanoparticles were finely dispersed in the porous ZIF-67 derivative (ZD). NZVI@ZD exhibited excellent removal performance for Cr(VI), owing to its high specific surface area and large pore size favorable for Cr(VI) adsorption and diffusion. The maximum adsorption capacity of NZVI@ZD for Cr(VI) was surprisingly as high as 226.5 mg g^-1, surpassing the pristine ZIF-67 (29.35 mg g^-1) and NZVI@ZIF-67 (36.53 mg g^-1). Zeta potential and X-ray photoelectron spectroscopy (XPS) spectra revealed that electrostatic attraction, reduction and precipitation might be involved in the Cr(VI) removal process by NZVI@ZD, resulting in the conversion of the adsorbed Cr(VI) to Cr(III) of lower toxicity and an eventual immobilization on the NZVI@ZD. The magnetic core-shell structured NZVI@ZD possessed superior adsorptive reactivity for Cr(VI) to most other traditional or newly reported materials, thus should be deemed highly efficient for Cr(VI)-contaminated wastewater treatment.

Magnetically modified hydroxyapatite nanoparticles for the removal of uranium (VI): Preparation, characterization and adsorption optimization

Recently, magnetically modified nanomaterials have gained a great interest in the field of wastewater remediation. In this regard, the present work introduces a facile microwave-assisted pathway for the preparation of magnetically modified hydroxyapatite nanoparticles (MNHA) and evaluates its adsorption capability towards the removal of uranium (VI) ions from wastewaters. The prepared magnetic nanocomposite went through a full characterization procedure using different techniques, such as transmission electron microscope (TEM), X-ray diffraction (XRD), FT-IR, Brunauer-Emmett-Teller (BET) surface area measurements and magnetization curve. Involvement of the prepared MNHA in the remediation of wastewater containing U(VI) ions was investigated and the factors that influence the adsorption capacity were considered and optimized. The adsorption's optimum pH was found to be 5.0 and equilibrium was attended after 120 min. A maximum adsorption capacity of 310 mg/g was achieved after 120 min at 25 °C. The experimental data were well explained by Langmuir adsorption isotherm model. Kinetically, the adsorption process follows the pseudo-second order model. Thermodynamically, it is endothermic, irreversible and spontaneous adsorption process. Removal of U(VI) ions was found to take place via complex formation between the phosphate groups on the adsorbent and uranyl ions. The recovery of U(VI) ions from MNHA beads and the reusability of the spent beads were also explored. It was concluded that the prepared MNHA nanocomposite is simple, fast, ecofriendly adsorbent for the removal of U(VI) ions from water with excellent adsorption capacity.

Metal–organic framework-based materials for the recovery of uranium from aqueous solutions

This review focuses on the recent progress in MOFs and MOF-based materials as superior adsorbents for the efficient removal of uranium from aqueous solutions.