Microplastics in the marine environment: Current trends and future perspectives

Microplastics in seafood: Navigating the silent health threat and intestinal implications through a One Health food safety lens

This systematic review revealed microplastic (MP) contamination and conducted hazard risk assessment in various seafood species of different geographic locations. Evidence was available on fish, crustaceans, and mollusks, with most studies from China reporting 19 seafood species containing the highest variety of total MP polymers. The maximum percentage of MPs in terms of size, composition, shape, and color was attributed to 100-1500 µm, polyethylene terephthalate (PET), fibers, and blue color, respectively. Aquatic life in brackish and marine ecosystems harbored higher levels of MPs than freshwater organisms. Crustacean species Thenus orientalis (flathead lobster) off the coasts of Iran were the most heavily loaded with 460.2 MPs/individual. Meta-analysis revealed high statistical and model heterogeneity of MP content in fish (mean 1.11 MPs/individual, 95 % confidence interval (CI)= 0.3-1.92) and shellfish (1.43 MPs/individual, 95 % CI= -0.35-3.21). The highest MP contamination factor (CF) was estimated in marine carnivorous Plectropomus leopardus (leopard coral trout) from Australia/Fiji (CF= 3.06), omnivorous Portunus sanguinolentus (three spot crab) from India (CF= 5.44), and filter-feeding Chlamys nobilis (noble scallop) from China (CF= 3.38), with the highest pollution risk index (PRI) values of 366877.6, 46437.5, and 45672.2, respectively. Studies show that MPs are potential triggers of altered key microbial diversity of Firmicutes, Fusobacteria, Proteobacteria, Actinobacteria, and Bacteroidetes. The dysbiotic properties of MPs increased intestinal permeability and decreased immune system associated with inflammation. In summary, this study provides a significant understanding of the MP abundance in edible seafood species and knowledge of MP risk assessment important to safeguard food safety and human health.

Characterization, surface deformation analysis and sources of small plastic fragments collected in diverse environments of Egypt

This study investigates the sources and morphological characteristics of plastic waste across diverse Egyptian environments-marine (Mediterranean and Red Seas), freshwater (River Nile), and terrestrial (urban streets). Predominant plastics found in various marine areas include polyethylene and polypropylene, originating from both maritime and urban sources. In the Mediterranean, these plastics show higher levels of UV-induced degradation, resulting in fragments measuring 18-22 mm in size and 1-1.2 mm in thickness. The River Nile exhibits polystyrene fragments, with average sizes of 20-26 mm and thicknesses of 0.7-0.9 mm influenced by urban and agricultural runoff. Urban streets display a mix (polypropylene, polyethylene, and polystyrene), with thicker fragments (averaging 1.8 mm) due to mechanical wear and pollution. Analysis shows varying surface loss: Mediterranean (29 %), Red Sea (20-23 %), freshwater (18 %), and urban streets (up to 30 %), indicate differential degradation influenced by environmental conditions and human activities. These findings underscore the need for targeted policies to mitigate plastic pollution across Egypt's landscapes, crucial for global conservation efforts.

Improving Thermo-Sealing of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Blending with Polycaprolactone

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a biodegradable biopolymer from the PHAs family that has potential to replace conventional plastics and reduce plastic pollution. However, PHBV has thermo-sealability issues, making it challenging to use for bags. Blending it with polycaprolactone (PCL) could address this but may alter the barrier properties of the films, affecting their effectiveness as food packaging material. This study examined the properties and heat-sealing capacity of PHBV/PCL blend films (ratios: 60/40, 50/50, and 40/60), obtained by melt blending and compression moulding. Both polymers are immiscible and were in separated phases; the continuous phase was PHBV in the 60/40 blend and PCL in the 40/60 blend, while the 50/50 sample exhibited interpenetrating bicontinuous phases of both polymers. The permeability to water vapour, oxygen, and D-limonene increased as the PCL content rose, especially when it formed the continuous phase in the matrix. The elastic modulus and resistance to break decreased, while extensibility increased, more markedly when PCL was the continuous phase. However, the continuity of PCL phase provided the films with better thermal adhesion and seal strength. The 50/50 blend showed the best balance between heat sealability and barrier properties, making it the most suitable for food packaging in sealed bags.

Mechanistic insight of neurodegeneration due to micro/nano-plastic-induced gut dysbiosis

Despite offering significant conveniences, plastic materials contribute substantially in developing environmental hazards and pollutants. Plastic trash that has not been adequately managed may eventually break down into fragments caused by human or ecological factors. Arguably, the crucial element for determining the biological toxicities of plastics are micro/nano-forms of plastics (MPs/NPs), which infiltrate the mammalian tissue through different media and routes. Infiltration of MPs/NPs across the intestinal barrier leads to microbial architectural dysfunction, which further modulates the population of gastrointestinal microbes. Thereby, it triggers inflammatory mediators (e.g., IL-1α/β, TNF-α, and IFN-γ) by activating specific receptors located in the gut barrier. Mounting evidence indicates that MPs/NPs disrupt host pathophysiological function through modification of junctional proteins and effector cells. Moreover, the alteration of microbial diversity by MPs/NPs causes the breakdown of the blood-brain barrier and translocation of metabolites (e.g., SCFAs, LPS) through the vagus nerve. Potent penetration affects the neuronal networks, neuronal protein accumulation, acceleration of oxidative stress, and alteration of neurofibrillary tangles, and hinders distinctive communicating pathways. Conclusively, alterations of these neurotoxic factors are possibly responsible for the associated neurodegenerative disorders due to the exposure of MPs/NPs. In this review, the hypothesis on MPs/NPs associated with gut microbial dysbiosis has been interlinked to the distinct neurological impairment through the gut-brain axis.

Microplastics in different tissues of historical and live samples of endangered mega-fish (Acipenser sinensis) and their potential relevance to exposure pathways

The Chinese sturgeon (Acipenser sinensis) is an endangered freshwater mega-fish (IUCN-red listed) that survives in the Yangtze River Basin, but the population of which has declined significantly in response to environmental pressures generated by human activities. In order to evaluate the interaction between Chinese sturgeon and microplastics (MPs) for the first time, we examined the gut and gills of historical samples (n = 27), in conjunction with the blood and mucus of live samples (n = 10), to explore the potential pathways involved in MP uptake. We detected MPs in 62.9 % of the field fish, with no significant difference between guts (mean=0.9 items/individual) and gills (mean=0.8 items/individual). The abundance of MPs in fish from 2017 was significantly higher than that from 2015 to 2016 with regards to both gills and gut samples. The size of MPs in gills was significantly smaller than those in guts, yet both contained mostly fibers (90.2 %). No MPs were confirmed in blood, however 62.5 % of mucus samples contained MPs. The MPs in mucus indicated the possibility of MPs entering Chinese sturgeons if their skins were damaged. The body size of Chinese sturgeons affected their MPs uptake by ingestion and inhalation, as less MPs were detected in the gut and gills of smaller individuals. Combining the evidence from historical and live samples, we revealed the presence of MPs in different tissues of Chinese sturgeon and their potential relevance to exposure pathways. Our work expands the understanding of multiple exposure pathways between MPs and long-lived mega-fish, while emphasizing the potential risks of long-term exposure in the field.

Microplastic contamination in marine mussels from the Atlantic coast of North Portugal and human risk of microplastic intake through mussel consumption

Microplastic (MP) pollution has become a global concern due to its potential impacts on the environment, ecosystem services and human health. The goals of the present study were to document the MP contamination in wild specimens of Mytilus galloprovincialis sampled along the Atlantic coast of the North region of Portugal continental (NW Portuguese coast), and to estimate the human risk of MP intake (HRI) through the consumption of local mussels as seafood. Mussels were collected at four sampling sites along the NW Portuguese coast (40 mussels per site), and the whole soft body of each mussel was analysed for MP content. HRI estimates were based on the mean of MP items per wet weight of mussel analysed tissue (MP/g) and consumption habits. A total of 132 MP items were recovered from mussels. MP had diverse sizes (98-2690 μm) and colours. The most common shapes were fibres (39%) and pellets (36%). Five polymers were identified in the MP: polyethylene (50%), polystyrene (15%), poly(ethylene vinyl acetate) (14%), polyamide (12%) and polypropylene (9%). From the 160 analysed mussels, 55% had MP. The mean and standard error of the mean of mussel contamination ranged from 0.206 ± 0.067 and 0.709 ± 0.095 MP/g. Compared to estimates based on MP contamination in mussels from other areas and varied consumption habits, the HRI through the consumption of mussels from the NW Portuguese coast is relatively low.

The exploitation of bio-electrochemical system and microplastics removal: Possibilities and perspectives

Microplastic (MP) pollution has caused severe concern due to its harmful effect on human beings and ecosystems. Existing MP removal methods face many obstacles, such as high cost, high energy consumption, low efficiency, release of toxic chemicals, etc. Thus, it is crucial to find appropriate and sustainable methods to replace common MP removal approaches. Bio-electrochemical system (BES) is a sustainable clean energy technology that has been successfully applied to wastewater treatment, seawater desalination, metal removal, energy production, biosensors, etc. However, research reports on BES technology to eliminate MP pollution are limited. This paper reviews the mechanism, hazards, and common treatment methods of MP removal and discusses the application of BES systems to improve MP removal efficiency and sustainability. Firstly, the characteristics and limitations of common MP removal techniques are systematically summarized. Then, the potential application of BES technology in MP removal is explored. Furthermore, the feasibility and stability of the potential BES MP removal application are critically evalauted while recommendations for further research are proposed.

Occurrence and sources of hormones in water resources-environmental and health impact

Within recent years, hormones have become emergent contaminants in the water environment. They easily accumulate in living organisms which in effect leads to numerous health problems (endocrine-disrupting mechanism is one of the most known toxic effects). Microbial resistance to antibiotics also became one of the emergent issues related to hormone presence. It was shown that the most common in the environment occur estrogens (E1, E2, E3, and EE2). It has been proven that large amounts of hormones are released from aquaculture as well as from wastewater treatment plants (due to the relatively low separation efficiency of conventional wastewater treatment processes). Within the article's scope, the literature review was performed. The analysis was regarding the characterization of the hormone substances present in the environment, their influence on living organisms and the environment, as well as its potential sources classification.

Terrestrial wildlife as indicators of microplastic pollution in western Thailand

Plastic pollution in terrestrial wildlife represents a new conservation challenge, with research in this area, especially within protected areas (PAs), being scant. This study documents the accumulation of microplastics (MPs) in terrestrial wildlife both inside and outside PAs in western Thailand. Carcasses of road-killed vertebrates in good condition, as well as live tadpoles, were collected to examine their exposure to plastic pollution. The digestive tracts of the vertebrate carcasses and the entire bodies of tadpoles were analyzed for MPs, which were identified if they measured over 50 µm. A total of 136 individuals from 48 vertebrate species were examined. The sample comprised snakes (44.12%), birds (11.03%), lizards (5.15%), tadpoles (32.25%), amphibians (5.88%), and mammals (1.47%). In total, 387 MPs were found in 44 species (91.67%), with an average occurrence of 3.25 ± 3.63 MPs per individual or 0.05 ± 0.08 MPs per gram of body weight. The quantities of MPs significantly varied among the animal groups, both in terms of number per individual (p < 0.05) and number per gram of body weight (p < 0.01). Furthermore, a significant difference in MP quantities was observed between specimens collected inside and outside PAs on an individual basis (p < 0.05), but not on a body weight basis (p = 0.07). Most MPs were fibers (77%), followed by fragments (22.22%), with only a minimal presence of film (0.52%) and foam (0.26%). Of all the MPs identified, 36.84% were confirmed as plastics or fibers made from natural materials, and 31.58% were plastics, including Polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), Polyvinylidene chloride (PVDC), and polyester (PES). Additionally, fibers made of cotton, and those containing polyurethane (PU), rayon, PES, and combinations of rayon and PU, were identified. The quantities of MPs were significantly influenced by animal body weight, factors associated with human settlement/activity, and land use types. Our findings highlight the prevalence of plastic pollution in terrestrial vertebrates within Thai PAs. Further toxicological studies are required to establish plastic pollution standards. It is proposed that snakes, obtained from road kills, could serve as a non-invasive method for monitoring plastic pollution, thus acting as an indicator of the pollution threat to species within terrestrial ecosystems. There is an urgent need for the standardization of solid waste management at garbage dump sites in remote areas, especially within PAs. Conservation education focusing on MP occurrence, potential sources, and impacts could enhance awareness, thereby influencing changes in behaviors and attitudes toward plastic waste management at the household level.

Unraveling the micro- and nanoplastic predicament: A human-centric insight

Micro- and nanoplastics are vast anthropogenic pollutants in our direct surroundings with a robust environmental stability and a potential for a long-lasting and increasing global circulation. This has raised concerns among the public and policy makers for human health upon exposure to these particles. The micro- and nanoplastic burden on humans is currently under debate, along with criticism on the experimental approaches used in hazard assessment. The present review presents an overview of the human-relevant aspects associated with the current micro-and nanoplastic burden. We focus on environmental circulation and the estimation of exposure quantities to humans, along with a state-of-the-art overview of particle accumulation in over 15 human organs and other specimen. Additionally, data regarding particle characteristics used in toxicity testing was extracted from 91 studies and discussed considering their environmental and human relevance.

Microplastics in the stomach content of the commercial fish species Scomber colias in the Gulf of Cadiz, SW Europe

Concerning microplastics (MPs) contamination is increasing due their negative impacts on marine food webs and their potential toxicity to wildlife and humans. In this study, we analyze the presence of MPs in the stomachs of the commercial fish species Scomber colias (Atlantic chub mackerel) in the Gulf of Cadiz (GoC). Out of the 104 analyzed stomachs, 90.4 % contained some type of MPs, with an average of 5.4 MPs per individual. Of the 1152 MPs analyzed, 91.1 % were fibers, and 8.9 % fragments type. Fourier Transformation Infrared Spectrometry analysis was performed on 152 items, revealing that 73.6 % were MPs. The most common synthetic polymers found were polyamide (64 %), polypropylene (15 %), polystyrene (12 %), polyvinyl chloride (5 %), and polyethylene (4 %). The consistent ingestion of synthetic polymers by the individuals of Atlantic chub mackerel across different zones might suggest an even distribution of MP contamination throughout the GoC.

A broad-taxa approach as an important concept in ecotoxicological studies and pollution monitoring

Aquatic invertebrates play a pivotal role in (eco)toxicological assessments because they offer ethical, cost-effective and repeatable testing options. Additionally, their significance in the food chain and their ability to represent diverse aquatic ecosystems make them valuable subjects for (eco)toxicological studies. To ensure consistency and comparability across studies, international (eco)toxicology guidelines have been used to establish standardised methods and protocols for data collection, analysis and interpretation. However, the current standardised protocols primarily focus on a limited number of aquatic invertebrate species, mainly from Arthropoda, Mollusca and Annelida. These protocols are suitable for basic toxicity screening, effectively assessing the immediate and severe effects of toxic substances on organisms. For more comprehensive and ecologically relevant assessments, particularly those addressing long-term effects and ecosystem-wide impacts, we recommended the use of a broader diversity of species, since the present choice of taxa exacerbates the limited scope of basic ecotoxicological studies. This review provides a comprehensive overview of (eco)toxicological studies, focusing on major aquatic invertebrate taxa and how they are used to assess the impact of chemicals in diverse aquatic environments. The present work supports the use of a broad-taxa approach in basic environmental assessments, as it better represents the natural populations inhabiting various ecosystems. Advances in omics and other biochemical and computational techniques make the broad-taxa approach more feasible, enabling mechanistic studies on non-model organisms. By combining these approaches with in vitro techniques together with the broad-taxa approach, researchers can gain insights into less-explored impacts of pollution, such as changes in population diversity, the development of tolerance and transgenerational inheritance of pollution responses, the impact on organism phenotypic plasticity, biological invasion outcomes, social behaviour changes, metabolome changes, regeneration phenomena, disease susceptibility and tissue pathologies. This review also emphasises the need for harmonised data-reporting standards and minimum annotation checklists to ensure that research results are findable, accessible, interoperable and reusable (FAIR), maximising the use and reusability of data. The ultimate goal is to encourage integrated and holistic problem-focused collaboration between diverse scientific disciplines, international standardisation organisations and decision-making bodies, with a focus on transdisciplinary knowledge co-production for the One-Health approach.

From the closet to the shore: Fashion waste pollution on Colombian Central Caribbean beaches

This paper examines the environmental effects of fashion waste on the central Caribbean coast of Colombia, highlighting significant ecological issues in coastal areas. A survey of 27 beaches found 503 items of fashion waste, mainly shoes and sandals, with an average density of 0.93 items/m2. The distribution of this type of waste varies notably across different beach types, with exposed, rural, and remote beaches showing higher accumulation, indicating a relationship between beach characteristics and waste concentration. Primary sources of this waste include riverine transport, coastal tourism, and poorly managed sewage systems, impacting urban, rural, and village beaches differently. The study reveals that longshore currents and oceanic movements, significantly influence the transport and fate of this waste, with exposed beaches accumulating more fashion waste than sheltered ones. The presence of driftwood also plays a vital role in trapping fashion waste along coastlines. The findings highlight the need for effective management strategies to mitigate the impact of fashion waste, providing crucial insights for local and national coastal managers and implications for managing fashion waste in the Southern Caribbean and similar regions worldwide.

Identification and analysis of microplastics in human lower limb joints

Microplastics (MPs) have been detected in various human tissues, including the liver, placenta, and blood. However, studies about MPs in the human locomotor system are limited. This study evaluated the presence of MPs in the synovium of 45 patients undergoing hip or knee arthroplasty using micro-Fourier transform infrared spectroscopy, scanning electron microscopy, and Raman microscopy and investigated their association with clinical indicators and local cellular responses. A total of 343 MPs of nine common types were identified, with a mean abundance of 5.24 ± 2.07 particles/g and ranging from 1.16 to 10.77 particles/g. Although there was no clear correlation between MP abundance and demographics, MP abundance was higher in hip samples than in knee samples. In addition, a potential association was observed between MP abundance and specific clinical diagnoses. Transcriptomic analysis revealed that a three-fold increase in MP abundance corresponded to enhanced local cellular stress responses, particularly heat shock protein reactions. Our findings demonstrate the presence of MPs in human joints and suggest that further studies are needed to explore the intricate associations between MPs and anatomical location, clinical diagnosis, and local cellular responses.

Microplastic particles in river sediments and water of southwestern Nigeria: insights on the occurrence, seasonal distribution, composition, and source apportionment

Microplastics (MPs) are globally recognized as an emerging environmental threat, particularly in the aquatic environment. This study presents baseline data on the occurrence and distribution of MPs in sediments and surface water of major rivers in southwestern Nigeria. Microplastics were extracted by density separation and polymer identification using Fourier transformed infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR). The abundance of MPs in surface sediment and water samples across all locations ranged from 12.82 to 22.90 particle/kg dw and 6.71 to 17.12 particle/L during the dry season and 5.69 to 14.38 particle/kg dw and 12.41 to 22.73 particle/L during the wet season, respectively. On average, fiber constituted the highest percentage of MP in sediments (71%) and water (67%) while foam accounted for the lowest values of 0.6% and 1.7%, respectively. Polypropylene (PP) and polyethylene (PE) were the main MPs across all locations based on Fourier transform infrared spectroscopy (FTIR). MPs of size < 1 mm were the most abundant (≥ 55%) on average in both water and sediments. The study identified run-off from human activities and industrial wastewater as potential sources of MP exposure based on positive matrix factorization. The study suggests assessing the impact of different land-use activities on MPs occurrence and distribution in addition to quantifying MPs in seafood as a way forward in food safety management systems for further studies. This study confirmed the occurrence and widespread distribution of MPs in surface water and sediments and provides a database on MP pollution in Nigeria.

Does the mouth size influence microplastic ingestion in fishes?

This study investigated microplastic (MP) contamination in six tropical fish species of different mouth sizes and trophic levels from Saint Martin's Island, Bay of Bengal. A total of 309 microplastics (MPs) were extracted from the gastrointestinal tract (GT) of these selected fishes, where the presence of MPs was 100 %. The mean abundance of MPs was significantly varied among the species and ranged from 4.38 to 10 MPs/GT (p < 0.05). This study revealed that MP incidence was strongly correlated with the mouth-to-body ratio of the selected fishes (r = 0.424, p = 0.003) and trophic levels (r = 0.458, p = 0.002). Results suggest that fish with larger mouths are more likely to ingest MPs, intentionally or unintentionally, compared to those with smaller mouths.

Microplastics - A major contaminant in marine macro algal population: Review

Microplastics (MPs) are a significant concern in this modern environment, and the marine environment is a sink for them now. Researchers have taken an interest in marine microplastic studies recently, which has opened the door to research in macroalgae and microalgae. Macroalgae are the primary producers in maritime ecosystems and are economically significant. This review aimed to identify the microplastic interactions with marine macroalgae and the impacts of microplastics on macroalgae based on existing literature while also recognizing knowledge gaps. MPs were mostly fibers and polymers with notable production and application levels; their abundance differed among species. More MPs were found in filamentous species than in other types. The results of this study indicated that, in maritime environments, macroalgae contribute to MP biomagnification and bioaccumulation. Adequate studies are needed to fill the research gaps in this area of MPs in macroalgae and their effects.

Rapid Assessment of Di(2-ethylhexyl) Phthalate Migration from Consumer PVC Products

Poly(vinyl chloride) (PVC) is widely used to produce various consumer goods, including food packaging, toys for children, building materials, and cosmetic products. However, despite their widespread use, phthalate plasticizers have been identified as endocrine disruptors, which cause adverse health effects, thus leading to increasing concerns regarding their migration from PVC products to the environment. This study proposed a method for rapidly measuring the migration of phthalates, particularly di(2-ethylhexyl) phthalate (DEHP), from PVC products to commonly encountered liquids. The release of DEHP under various conditions, including exposure to aqueous and organic solvents, different temperatures, and household microwaves, was investigated. The amount of DEHP released from both laboratory-produced PVC films and commercially available PVC products was measured to elucidate the potential risks associated with its real-world applications. Furthermore, tests were performed to evaluate cytotoxicity using estrogen-dependent and -independent cancer cell lines. The results revealed a dose-dependent impact on estrogen-dependent cells, thus emphasizing the potential health implications of phthalate release. This comprehensive study provides valuable insights into the migration patterns of DEHP from PVC products and forms a basis for further research on the safety of PVC and plasticizers.

Microplastics leaving a trace in mangrove sediments ever since they were first manufactured: A study from Indonesia mangroves

Mangrove environments have been well recognized as marine litter traps. However, it is unclear whether mangrove sediments sink microplastics more effectively than other marine sediments due to active sedimentation. Furthermore, microplastics archives in mangrove sediments may provide quantitative data on the impact of human activities on environmental pollution throughout history. Microplastic abundance varied markedly between high and low anthropogenic activities. Both mangrove and adjacent mudflats sediments act as microplastic sequesters, despite having similar microplastic abundances and depth profiles. The decreasing trend of microplastics was observed until the sediment layers dated to the first-time plastic was manufactured in Indonesia, in the early 1950s, but microplastics remained present beneath those layers, indicating the downward movements. This discovery highlighted the significance of mangrove sediments as microplastic sinks. More research is needed to understand the mechanisms of microplastic deposition in sediments, as well as their fate and potential impact on mangrove sediment dwellers.

Numerical simulation research of the transportation and distribution characteristics on sea surface of the microplastic released continuously for 12 years from China's coastal cities

Based on the Lagrangian random walk particle tracking method and the global ocean reanalysis data, this study simulated the drift-diffusion process in ocean of microplastic particles (density less than seawater) discharged by coastal cities in China for 12 consecutive years. The results reveal that most of the microplastics (80.33%) essentially end up ashore or in the marginal seas around China, a small portion of microplastics (18.22%) enter the Sea of Japan and the Northwest Pacific Ocean via the Tsushima Strait and the Osumi-Kaikyo with the Kuroshio Tide, a very small portion of microplastics (1.45%) enter into the waters of Southeast Asian countries along with the west boundary current of South China Sea. The concentration distribution characteristics have obvious seasonal variation in the high concentration areas (the marginal seas around China and Sea of Japan). The mainly destination area of microplastics released in different cities is different.

Microplastics in gastrointestinal tracts of gentoo penguin (Pygoscelis papua) chicks on King George Island, Antarctica

Microplastics (< 5 mm) have been found in marine ecosystems worldwide, even in Antarctic ecosystems. In this study, the stomach and upper intestines of 14 dead gentoo penguin (Pygoscelis papua) chicks were collected and screened for microplastics on King George Island, a gateway to Antarctic research and tourism. A total of 378 microplastics were identified by Fourier-transform infrared spectroscopy, with 27.0 ± 25.3 microplastics per individual. The detected number of microplastics did not increase with the mass of penguin chicks, suggesting no permanent accumulation of microplastics. However, the concentration of microplastics was much higher (9.1 ± 10.8 microplastics per individual within the size range 100-5000 μm) than the previously reported concentration in the penguin feces, and a greater number of smaller microplastics were found. Marine debris surveys near the breeding colony found various plastic (79.3%) to be the most frequent type of beached debris, suggesting that local sources of marine plastic waste could have contributed to microplastic contamination of penguin chicks being fed by parents that forage in nearby seas. This finding confirms the presence of microplastics in an Antarctic ecosystem and suggests the need for stronger waste management in Antarctica and a standardized scheme of microplastic monitoring in this once-pristine ecosystem.

Preliminary Study on the Role of Mangroves in Entrapping Microplastics in Tuticorin Coast of Gulf of Mannar, Southeast Coast of India

Mangroves constitute a unique and important type of coastal wetlands in tropical and subtropical zones worldwide. The abundance of microplastics (MPs) in the mangrove sediments is poorly understood. This study aimed to quantify the role of mangrove root systems in effectively entrapping MPs in the mangrove areas of Tuticorin and Punnakayal Estuary. It investigated the abundance, characteristics, and weathering patterns of MPs in different mangrove sediments. Sediment samples were collected from ten mangrove sites and two control sites without mangroves. Microplastics were extracted from mangrove sediments by density separation method, and then counted and categorized according to their shape, size, and colour. Microplastics were identified in all ten sampling sites. Punnakayal Estuary has a greater MPs concentration (27 ± 2.65 items/kg dw) than Tuticorin (9.33 ± 2.52 items/kg dw). Also, microplastic concentrations are higher in the mangrove sites than in the control sites. Most MPs are fibres with size ranges of 1-2 mm and 2-3 mm dominating. Blue and transparent are the predominant colours. Four polymers were identified, namely polyethylene (PE), polypropylene (PP), polymethyl methaacrylate (PMMA), and polyurethane (PUR). The degree of weathering was confirmed by carbonyl index and the values vary between 0.28 and 1.25 for PE and 0.6 and 1.05 for PP.

Kıyı Lagün Sedimentlerinde Mikroplastiklerin Oluşumları ve Mekansal Dağılımları: Küçükçekmece Lagünü Örneği

Nehir, haliç ve lagünler, karasal ve deniz ekosistemleri arasında bağlantıyı sağlarken, tıpkı diğer kirleticilerde olduğu gibi sediment yapılarında da mikroplastik kirliliği hakkında kapsamlı bir profil ortaya koymaktadır. Bu çalışmada, Küçükçekmece Lagünü’nün üç farklı sucul alanından (deniz, kanal ve göl) alınan sediment örneklerinde mikroplastik bolluğu ve karakterizasyonunun belirlenmesi amaçlanmıştır. Bu kapsamda, lagünde belirlenen 5 istasyondan 12 aylık (Mart 2019 – Şubat 2020) sediment örnekleri alınmıştır. Mikroplastik ön işlemlerine tabi tutulan sediment örneklerinde, stereomikroskop ile mikroplastik bolluğu sayımı ve kategorizasyonu (boyut, tip ve renk) yapılmıştır. Ortalama mikroplastik bolluğu 2922,32±517,35 MP/kg olarak belirlenmiş olup, tespit edilen ortalama mikroplastik bolluğu değeri, ülkemizde daha önce yapılmış benzer çalışmalara kıyasla 2,4 kat daha yüksek bulunmuştur. Liflerin (%59) baskın mikroplastik tipi olduğu, baskın mikroplastik renginin siyah (%42) olduğu ve MP boyutlarının %50’sinin 1-100 μm arasında olduğu belirlenmiştir. Mevsimsel mikroplastik dağılımı irdelendiğinde ise, en yüksek bolluk değerlerinin yağışlı sezon olan kış aylarında olduğu tespit edilmiştir. Çalışma alanında en yüksek ortalama mikroplastik bolluğuna sahip L1 istasyonu, Küçükçekmece Lagünü Bağlantı Alanı temsil etmekte olup, lagündeki tüm antropojenik baskıların hissedildiği istasyon olarak ortaya çıkmaktadır. Bu çalışma, dünyanın diğer bölgelerindeki benzer sediment alanları için mikroplastik bolluğu ve dağılımı hakkında temsili veriler sağlamayı amaçlamaktadır.

Two genes related to apoptosis in the hepatopancreas of juvenile prawn, Macrobrachium nipponense: Molecular characterization and transcriptional response to nanoplastic exposure

Nanoplastics have been widely found in the global water environment, causing plastic pollution and affecting human beings and numerous organisms. Studies involving freshwater crustacean exposure to nanoplastics, however, are limited. In this study, juvenile prawns (Macrobrachium nipponense) were exposed to 75 nm polystyrene nanoplastics at different concentrations (0, 5, 10, 20, or 40 mg/L) for a 28-d chronic exposure experiment. To study the effects of exposure to nanoplastics on hepatopancreas cell apoptosis, C-Jun N-terminal kinase (JNK) and phosphatidylinositol-4,5-bisphosphate 3-kinase, catalytic subunit alpha (PIK3CA) genes were selected, and hepatotoxic enzyme activities and Toll pathway- and apoptosis-related gene expression were determined. For the first time, full-length Mn-JNK and Mn-PIK3CA cDNAs were cloned from M. nipponense. Homologous comparisons showed that JNK and PIK3CA had conserved functional sequences. The apoptosis rate in the high-concentration nanoplastic group (40 mg/L) was significantly higher than in the low-concentration nanoplastic (5 mg/L) and control groups (0 mg/L). The alanine aminotransferase (ALT), aspartate aminotransferase (AST), glutamyl transpeptidase (GGT) and xanthine oxidase (XOD) enzyme activities in the hepatopancreas increased with exposure to higher concentrations of nanoplastics. In addition, the levels of apoptosis- and Toll pathway-related gene expression and JNK and PIK3CA gene expression were initially increased, then decreased with exposure to higher concentrations of nanoplastics. This study showed that polystyrene nanoplastics activate toll-related pathways leading to apoptosis and hepatopancreas damage, which provides theoretical support for future aquatic toxicological research.

Evaluation of microplastics isolated from sea cucumber Acaudina molpadioides in Pulau Langkawi, Malaysia

Plastic pollution is an emerging environmental concern in recent years due to continuous mass production and its slow degradation. Microplastics measuring between 5 mm and 1 μm are being ingested by marine animals and eventually by human consumption in form of seafood. The aim of this research was to evaluate microplastics isolated from sea cucumber Acaudina molpadioides in Pulau Langkawi. A total of 20 animals were collected and their gastrointestinal tract were digested using NaOH. Microplastics were isolated, filtered and identified through microscopic examination based on the colour, shape and size. The chemical composition of microplastics were further analyzed by FTIR to identify the functional group of polymers. A total of 1652 microplastics were found in A. molpadioides. Fibres (99.4%) and black color (54.4%) were the majority of microplastics observed in terms of shapes and colors. The size range within 0.5-1 μm and 1-2 μm were the highest abundance observed. There were two identified polymer types of microplastics obtained through FTIR which were polyethylene (PE) and polymethyl methacrylate (PMMA). In conclusion, microplastics were isolated from the gastrointestinal tract of A. molpadioides indicating that the animals were contaminated. Further research can be done on the toxicity effects of these microplastics towards human upon consumption of these animals as seafood.

Marine litter education: From awareness to action

Marine litter is a global problem. Education has been acclaimed as a potential tool to tackle this issue, yet, integrative, student-centered, and over weeks studies to raise awareness on the theme that compares pre- with post-intervention results are limited in the literature. Furthermore, almost no studies rely on the basis of previous experience on the theme and local reality. This paper presents the design, implementation, and evaluation of an educational intervention to raise awareness and educate students (1st cycle to high-school) about marine litter. Different learning skills were fostered through theoretical, laboratorial, and hands-on activities and students participated in a beach clean-up to summarize the classroom's learnings in loco. Pre- and post-questionnaire results indicate that students' knowledge, perceptions, and behavioral intentions changed. Identification of marine litter estimated degradation times and observation of microplastics in local sand samples were activities highly appreciated by youngsters. This intervention positively impacted schoolchildren's literacy, contributing to advancing education in marine litter and can be further adapted to other educational areas.

Dietary Exposure to Particles of Polytetrafluoroethylene (PTFE) and Polymethylmethacrylate (PMMA) Induces Different Responses in Periwinkles Littorina brevicula

The marine and ocean water pollution with different-sized plastic waste poses a real threat to the lives of the next generations. Plastic, including microplastics, is found in all types of water bodies and in the organisms that live in them. However, given the chemical diversity of plastic particles, data on their toxicity are currently incomplete. Moreover, it is clear that different organisms, depending on their habitat and feeding habits, are at different risks from plastic particles. Therefore, we performed a series of experiments on feeding the gastropod scraping mollusk Littorina brevicula with two types of polymeric particles-polymethylmethacrylate (PMMA) and polytetrafluoroethylene (PTFE)-using a special feeding design. In the PMMA-exposed group, changes in gastrointestinal biochemical parameters such as increases in malondialdehyde (MDA) and protein carbonyls (PC) were detected, indicating the initiation of oxidative stress. Similarly, a comet assay showed an almost twofold increase in DNA damage in digestive gland cells compared to the control group. In mollusks fed with PTFE-containing food, no similar changes were recorded.

Microplastics in urban catchments: Review of sources, pathways, and entry into stormwater

Urban areas play a key role in the production of microplastics (MPs) and their entry into water bodies. This article reviews the literature on the sources, transport, and control of MPs in urban environments with the aim of clarifying the mechanisms underlying these processes. Major MP sources include atmospheric deposition, micro-litter, and tire and road wear particles (TRWPs). MPs deposited from the atmosphere are mostly fibers and may be particularly important in catchments without traffic. Littering and attrition of textiles and plastic products is another important MP source. However, the quantities of MPs originating from this source may be hard to estimate. TRWPs are a significant source of MPs in urban areas and are arguably the best quantified source. The mobilization of MPs in urban catchments is poorly understood but it appears that dry unconsolidated sediments and MP deposits are most readily mobilized. Sequestration of MPs occurs in green areas and is poorly understood. Consequently, some authors consider green/pervious parts of urban catchments to be MP sinks. Field studies have shown that appreciable MP removal occurs in stormwater quality control facilities. Street cleaning and snow removal also remove MPs (particularly TRWPs), but the efficacy of these measures is unknown. Among stormwater management facilities, biofiltration/retention units seem to remove MPs more effectively than facilities relying on stormwater settling. However, knowledge of MP removal in stormwater facilities remains incomplete. Finally, although 13 research papers reported MP concentrations in stormwater, the total number of field samples examined in these studies was only 189. Moreover, the results of these studies are not necessarily comparable because they are based on relatively small numbers of samples and differ widely in terms of their objectives, sites, analytical methods, size fractions, examined polymers, and even terminology. This area of research can thus be considered "data-poor" and offers great opportunities for further research in many areas.

Sorption of representative organic contaminants on microplastics: Effects of chemical physicochemical properties, particle size, and biofilm presence

Microplastic pollution has attracted mounting concerns worldwide. Microplastics may concentrate organic and metallic contaminants; thus, affecting their transport, fate and organismal exposure. To better understand organic contaminant-microplastic interactions, our study explored the sorption of selected polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), α-hexabromocyclododecane (α-HBCDD), and organophosphate flame retardants (OPFRs) on high-density polyethylene (HDPE) and polyvinylchloride (PVC) microplastics under saline conditions. Sorption isotherms determined varied between chemicals and between HDPE and PVC microplastics. Log Freundlich sorption coefficients (Log K_F) for the targeted chemicals ranged from 2.01 to 5.27 L kg^-1 for HDPE, but were significantly lower for PVC, i.e., ranging from Log K_F data (2.84 - 8.58 L kg^-1). Significant correlations between chemicals' Log K_F and Log K_ow (octanol-water partition coefficient) indicate that chemical-dependent sorption was largely influenced by their hydrophobicity. Sorption was evaluated using three size classes (< 53, 53 - 300, and 300 - 1000 µm) of lab-fragmented microplastics. Particle size did not significantly affect sorption isotherms, but influenced the time to reach equilibrium and the predicted maximum sorption, likely related to microplastic surface areas. The presence of biofilms on HDPE particles significantly enhanced contaminant sorption capacity, indicating more complex sorption dynamics in the chemical-biofilm-microplastic system. Our findings offer new insights into the chemical-microplastic interactions in marine environment.

The spatial distribution of microplastics in topsoils of an urban environment - Coimbra city case-study

Due to their seemingly ubiquitous nature and links to environmental and human health problems, microplastics are quickly becoming a major concern worldwide. Artificial environments, such as those found in urban environments, represent some of the main sources of microplastic. However, very few studies have focused on the occurrence of microplastics in urban soils. The aim of the current research was to evaluate the microplastic contamination in urban soils from artificial and natural land uses throughout Coimbra city, Portugal. Sixty-seven spaces and ten land use areas were evaluated. The artificial land use areas were dumps, landfills, parking lots, industries and construction areas, and the natural land use areas were forests, urban parks, moors (wetlands), pastures and urban agricultural areas. Microplastic extraction was done by density separation. Quantification and size measurements of microplastics was carried out using a microscope. Polymer types were identified by μ-FTIR for 25% of the samples. The microplastic content ranged from 5 × 10³ to 571 × 10³ particles·kg^-1, with a mean of 106 × 10³ particle·kg^-1. The green park was the land use with the highest concentration of microplastics (158 × 10³ particle·kg^-1) and the forest was the one with the lowest concentration (55 × 10³ particle·kg^-1). The landfill (150 × 10³ particle·kg^-1), industry (127 × 10³ particle·kg^-1) and dump (126 × 10³ particle·kg^-1) were the artificial spaces with the highest levels of microplastics. The main polymers detected were polypropylene and polyethylene, followed by polyvinyl chloride and rubber, and the main sizes measured between 50 and 250 μm. Our results indicate that natural spaces can contain higher amounts of microplastics as compared to artificial spaces in the urban environment. This suggests that microplastics are easily transported through the urban landscape and that urban green spaces can retain microplastics in their soils. Land use planning may present an opportunity to better control the levels of microplastics in urban environments.

A Production and Fractionation Protocol for Polyvinyl Chloride Microplastics

Concerns about the presence of microplastics in the environment has increased in recent years, prompting more attention from scientists. Thorough exposure studies using artificially produced microplastics containing additives are required to assess their potentially hazardous effects. Therefore, an efficient microplastic production and fractionation protocol was established using a cryogenic grinding and wet-sieving approach. The developed cryogenic grinding method was able to produce (20-40 g/h) polyvinyl chloride (PVC) microplastics having a volume-weighted mean particle size of 391 µm and a span of 2.12. Performing a second grinding cycle on the same particles resulted in microplastics which were smaller (volume-weighted mean size = 219 μm) and had a narrower particle size distribution (span = 1.59). In addition, the microplastics were also fractionated into different particle size ranges using a vibrating wet-sieving tower. The latter technique allowed separating 10 g of PVC microplastics into seven different fractions using six sieves (Ø 200 mm) for 30 min while shaking. By using the developed method, PVC microplastics could easily be made and fractionated into desired particle-size ranges. The proposed protocol could also be adjusted to produce and fractionate microplastics of other plastics.

Analysis of microplastics in soils on the high-altitude area of the Tibetan Plateau: Multiple environmental factors

Microplastics (MPs), a class of emerging contaminants, are ubiquitous in the environment, but limited information is known about them in remote terrestrial environment at high-altitude areas with inconvenient traffic and sparsely populated. In this study, 54 soil samples were collected from various land use patterns (greenhouse, ordinary farmland, grassland, and bare land) in western area of the Tibetan Plateau to determine the influence of land use type, altitude, meteorological parameters, and distance from the road edge on MP distribution. The MP abundance ranged from 0 (not detected) to 190 items/kg, with an average number of 64.8 items/kg. The concentration of MPs was slightly negatively correlated with altitude because of less human activities in high-altitude areas (especially agricultural activities). The random forest (RF) models showed that altitude was the most important driving factor that affected the MP distribution. Small-sized MPs were more abundant at higher altitudes than at low ones, and the special natural environment of the high-altitude areas (tall vegetation scarcely, UV, and strong wind speed) may be conducive to the degradation of MPs in surface soils. The special source of MPs in non-agricultural soils was associated with traffic behavior: parking and rest behavior beside roads at high altitude areas, which filled an important source of MPs in the plateau area. This study emphasized the need to investigate the effects of traffic activities on MPs in remote areas at high altitudes.

Assessing microplastic exposure of the Critically Endangered Mediterranean monk seal (Monachus monachus) on a remote oceanic island

Microplastics (<5 mm) are a ubiquitous marine pollutant which are highly bioavailable to marine organisms across all trophic levels. Marine predators are especially vulnerable to microplastic pollution through direct and indirect ingestion (e.g., trophic transfer) due to their high trophic position. In particular, oceanic islands are more susceptible to plastic accumulation, increasing the relative number of microplastics in the environment that are available for consumption. The dynamics of microplastic accumulation in marine predators inhabiting remote islands, however, is sparsely documented. Here we describe microplastic exposure in the Critically Endangered Mediterranean monk seal (Monachus monachus) from the Madeira archipelago (Northeast Atlantic) using scat-based analysis. Microplastics were recovered from 18 scat samples collected between 2014-2021 and were characterized to the polymer level using Fourier-Transform Infrared (u-FTIR) spectroscopy. A total of 390 microplastic particles were recovered, ranging between 0.2-8.6 particles g^-1 dry weight (mean 1.84 ± 2.14 particles g^-1) consisting mainly of fragments (69 %) of various sizes and polymer composition (e.g., PE, PET, PS). Microplastic prevalence (100 % of samples analysed) was higher than what has been previously recorded using scat-based analysis in other pinniped species. Our results suggest that the levels of microplastic pollution in the coastal food-web in the Madeira archipelago are relatively high, placing higher-trophic level organisms at increased risk of microplastic consumption, including humans. This study provides the first insights into microplastic exposure to Madeira's monk seals that may contribute to future management decisions for the species and their long-term survival.

A Critical Review on Artificial Intelligence-Based Microplastics Imaging Technology: Recent Advances, Hot-Spots and Challenges

Due to the rapid artificial intelligence technology progress and innovation in various fields, this research aims to use science mapping tools to comprehensively and objectively analyze recent advances, hot-spots, and challenges in artificial intelligence-based microplastic-imaging field from the Web of Science (2019-2022). By text mining and visualization in the scientific literature we emphasized some opportunities to bring forward further explication and analysis by (i) exploring efficient and low-cost automatic quantification methods in the appearance properties of microplastics, such as shape, size, volume, and topology, (ii) investigating microplastics water-soluble synthetic polymers and interaction with other soil and water ecology environments via artificial intelligence technologies, (iii) advancing efficient artificial intelligence algorithms and models, even including intelligent robot technology, (iv) seeking to create and share robust data sets, such as spectral libraries and toxicity database and co-operation mechanism, (v) optimizing the existing deep learning models based on the readily available data set to balance the related algorithm performance and interpretability, (vi) facilitating Unmanned Aerial Vehicle technology coupled with artificial intelligence technologies and data sets in the mass quantities of microplastics. Our major findings were that the research of artificial intelligence methods to revolutionize environmental science was progressing toward multiple cross-cutting areas, dramatically increasing aspects of the ecology of plastisphere, microplastics toxicity, rapid identification, and volume assessment of microplastics. The above findings can not only determine the characteristics and track of scientific development, but also help to find suitable research opportunities to carry out more in-depth research with many problems remaining.

Quantification of ternary microplastic mixtures through an ultra-compact near-infrared spectrometer coupled with chemometric tools

The ubiquitous distribution of plastics and microplastics (MPs) and their resistance to biological and chemical decay is adversely affecting the environment. MPs are considered as emerging contaminants of concern in all the compartments, including terrestrial, aquatic, and atmospheric environments. Efficient monitoring, detection, and removal technologies require reliable methods for a qualitative and quantitative analysis of MPs, considering point-of-need testing a new evolution and a great trend at the market level. In the last years, portable spectrometers have gained popularity thanks to the excellent capability for fast and on-site measurements. Ultra-compact spectrometers coupled with chemometric tools have shown great potential in the polymer analysis, showing promising applications in the environmental field. Nevertheless, systematic studies are still required, in particular for the identification and quantification of fragments at the microscale. This study demonstrates the proof-of-concept of a Miniaturized Near-Infrared (MicroNIR) spectrometer coupled with chemometrics for the quantitative analysis of ternary mixtures of MPs. Polymers were chosen representing the three most common polymers found in the environment (polypropylene, polyethene, and polystyrene). Daily used plastic items were mechanically fragmented at laboratory scale mimicking the environmental breakdown process and creating "true-to-life" MPs for the assessment of analytical methods for MPs identification and quantification. The chemical nature of samples before and after fragmentation was checked by Raman spectroscopy. Sixty three different mixtures were prepared: 42 for the training set and 21 for the test set. Blends were investigated by the MicroNIR spectrometer, and the dataset was analysed using Principal Component Analysis (PCA) and Partial Least Square (PLS) Regression. PCA score plot showed a samples distribution consistent with their composition. Quantitative analysis by PLS showed the great capability prediction of the polymer's percentage in the mixtures, with R² greater than 0.9 for the three analytes and a low and comparable Root-Mean Square Error. In addition, the developed model was challenged with environmental weathered materials to validate the system with real plastic pollution. The findings show the feasibility of employing a portable tool in conjunction with chemometrics to quantify the most abundant forms of MPs found in the environment.

Nano- and microplastics: a comprehensive review on their exposure routes, translocation, and fate in humans

Contamination of the environment with nano-and microplastic particles (NMPs) and its putative adverse effects on organisms, ecosystems, and human health is gaining increasing scientific and public attention. Various studies show that NMPs occur abundantly within the environment, leading to a high likelihood of human exposure to NMPs. Here, different exposure scenarios can occur. The most notable exposure routes of NMPs into the human body are via the airways and gastrointestinal tract (GIT) through inhalation or ingestion, but also via the skin due to the use of personal care products (PCPs) containing NMPs. Once NMPs have entered the human body, it is possible that they are translocated from the exposed organ to other body compartments. In our review article, we combine the current knowledge on the (1) exposure routes of NMPs to humans with the basic understanding of the potential (2) translocation mechanisms into human tissues and, consequently, their (3) fate within the human body. Regarding the (1) exposure routes, we reviewed the current knowledge on the occurrence of NMPs in food, beverages, personal care products and the air (focusing on indoors and workplaces) and found that the studies suggest an abundant presence of MPs within the exposure scenarios. The overall abundance of MPs in exposure matrices relevant to humans highlights the importance of understanding whether NMPs have the potential for tissue translocation. Therefore, we describe the current knowledge on the potential (2) translocation pathways of NMPs from the skin, GIT and respiratory systems to other body compartments. Here, particular attention was paid to how likely NMPs can translocate from the primary exposed organs to secondary organs due to naturally occurring defence mechanisms against tissue translocation. Based on the current understanding, we conclude that a dermal translocation of NMPs is rather unlikely. In contrast, small MPs and NPs can generally translocate from the GIT and respiratory system to other tissues. Thus, we reviewed the existing literature on the (3) fate of NMPs within the human body. Based on the current knowledge of the contamination of human exposure routes and the potential translocation mechanisms, we critically discuss the size of the detected particles reported in the fate studies. In some cases, the particles detected in human tissue samples exceed the size of a particle to overcome biological barriers allowing particle translocation into tissues. Therefore, we emphasize the importance of critically reading and discussing the presented results of NMP in human tissue samples.

Exposure of Cyprinus carpio var. larvae to PVC microplastics reveals significant immunological alterations and irreversible histological organ damage

Microplastics have become pervasive in ambient aquatic ecosystems over the last decade and are currently a serious global scale concern. To evaluate the potential toxic effects of PVC (polyvinyl chloride) microplastics on the immune functions of freshwater fish, this study undertook a conducted chronic 60-day dietary exposure experiment with Cyprinus carpio var. larvae. We exposed the fish to four microplastic treatments of different concentrations (food rationed diets): no-plastic (control), 10%, 20% and 30%. At the end of the experimental period the impacts of microplastics on the histology, biochemistry, ROS (reactive oxygen species) levels and gene transcription of immune organs were investigated. The results revealed that PVC microplastics induced cytoplasmic vacuolation in the liver, damaged villi in the intestine, inflammatory cell infiltration, hemosiderosis and vacuolar degeneration in the spleen, glomeruli tuft shrinkage and aggregation of melanin macrophage cells in the kidney. Moreover, following PVC microplastics exposure, ROS levels in the liver and protein levels of pro-inflammatory cytokines including IL-6, IL-8, and TNFα in the liver and serum were increased. Furthermore, modifications in the activities of non-specific immunoenzyme ACP (Acid phosphatase), AKP (alkaline phosphatase), LZM (lysozyme), and expression levels of a range of immune-related genes were observed. Using various techniques at the histological, biochemical and molecular levels, our findings demonstrated the effects of PVC microplastics on changes and imbalances in the immune status of carp. The results of this study provide basic toxicological data toward elucidating and quantifying the impacts of microplastics immunotoxicity on aquatic organisms.

Towards robust and repeatable methods for studying interactions between jellyfish and microplastics

Studies of microplastics are increasing exponentially and standard protocols are only beginning to be established. Jellyfish are considered susceptible to ingesting microplastics because they feed on small, suspended particles. Inconsistent approaches used to study interactions between jellyfish and microplastics, however, make comparisons among studies difficult. Here we review aspects of the methods used to sample jellyfish in the field and experimental approaches used in the laboratory to study interactions between jellyfish and microplastics, recommend some standard protocols and identify areas for further research. We highlight the need for experiments to be environmentally relevant, to study a greater diversity of species and to study different life history stages.

Risk associated with microplastics in urban aquatic environments: A critical review

The presence of microplastics (MPs) has been recognized as a significant environmental threat due to adverse effects spanning from molecular level, organism health, ecosystem services to human health and well-being. MPs are complex environmental contaminants as they bind to a wide range of other contaminants. MPs associated contaminants include toxic chemical substances that are used as additives during the plastic manufacturing process and adsorbed contaminants that co-exist with MPs in aquatic environments. With the transfer between the water column and sediments, and the migration within aquatic systems, such contaminants associated MPs potentially pose high risk to aquatic systems. However, only limited research has been undertaken currently to link the environmental risk associated with MPs occurrence and movement behaviour in aquatic systems. Given the significant environmental risk and current knowledge gaps, this review focuses on the role played by the abundance of different MP species in water and sediment compartments as well as provides the context for assessing and quantifying the multiple risks associated with the occurrence and movement behaviour of different MP types. Based on the review of past literature, it is found that the physicochemical properties of MPs influence the release/sorption of other contaminants and current MPs transport modelling studies have primarily focused on virgin plastics rather than aged plastics. Additionally, risk assessment of contaminants-associated MPs needs significantly more research. This paper consolidates the current state-of-the art knowledge on the source to sink movement behaviour of MPs and methodologies for assessing the risk of different MP species. Moreover, knowledge gaps and emerging trends in the field are also identified for future research endeavours.

Does marine environmental research meet the challenges of marine pollution induced by the COVID-19 pandemic? Comparison analysis before and during the pandemic based on bibliometrics

The outbreak of the COVID-19 pandemic has brought enormous challenges to the global marine environment. Various responses to the COVID-19 pandemic have led to increased marine pollution. Has the COVID-19 pandemic affected marine pollution research? This work comprehensively reviewed marine pollution publications in the Web of Science database before and during the COVID-19 pandemic. Results show that the COVID-19 outbreak has influenced the marine pollution research by: (i) increasing the number of publications; (ii) reshaping different countries' roles in marine pollution research; (iii) altering the hotspots of marine pollution research. The ranking of countries with high productivity in the marine pollution research field changed, and developed economies are the dominant players both before and after the outbreak of the COVID-19 pandemic in this field. Other high-productivity countries, with the exception of China, have higher international cooperation rates in marine pollution research than those before the pandemic. Microplastic pollution has been the biggest challenge of marine pollution and has been aexplored in greater depth during the COVID-19 pandemic. Furthermore, the mining results of marine pollution publications show the mitigation of plastic pollution in the marine environment remains the main content requires future research. Finally, this paper puts forward corresponding suggestions for the reference of researchers and practitioners to improve the global ability to respond to the challenges posed by the pandemic to the marine environment.

Review on invasion of microplastic in our ecosystem and implications

Today the world is going through the "Plastic Age." Nowadays, it is difficult to find a commonly used convenient item that is nonplastic. Plastic production and consumption, thus, increased exponentially and plastic emerged as one of the major concerns for waste management. Recent studies confirmed a faster rate of plastic degradation than previously believed under various conditions (e.g. saltwater, UV, soil interaction) that microplastic has become a new type of health-hazardous pollution source. Much research has been conducted since the discovery of the "Pacific Garbage Patch," and the scope has expanded from marine to soil, groundwater, air, and food chain. This article underwent a substantial amount of literature review to verify the degree of microplastic pollution progression in major pillars of the environment (aqueous, terrestrial, airborne, bio-organism, and human). Multiple kinds of literature indicated a high possibility of vigorous interaction among the pillars that microplastic is not stationary at the point of contamination but travels across the nation (transboundary) and medium (transmedium). Thus, only the waste reduction policy (i.e. production and consumption reduction) would be effective through a single national or local effort, while pollution and contamination management require more of a collective, if not global, approach. For these characteristics, this article proposes two most urgently required actions to combat microplastic pollution: (a) global acknowledgement of microplastic as transboundary and transmedium pollution source that require international collective action and (b) standardization of microplastic related research including basic definition and experimental specification to secure global comparativeness among data analysis. Without resolving these two issues, it could be very difficult to obtain an accurate global status mapping of microplastic pollution to design effective and efficient global microplastic pollution management policies.

A simple, rapid and accurate method for the sample preparation and quantification of meso- and microplastics in food and food waste streams

Plastics are produced and used in large quantities worldwide (e.g. as food packaging). In line with this, plastic particles are found throughout the ecosphere and in various foods. As a result, plastics are also present in energy-rich waste biomass derived from the food industry, supermarkets, restaurants, etc. These waste streams are a valuable source for biogas production but can also be used to feed insects that in turn upcycle it into new high-value biomass. In both applications, the remaining residue can be used as fertilizer. Due to the present plastic particles, these applications could pose a continued threat to the environment, and both human and animal health. Therefore, the need of determining the (micro)plastic content to assess the potential danger is rising. In this research, a closed-vessel microwave-assisted acid digestion method was developed to accurately determine meso- and microplastic contents in food (waste) matrices by solubilising this food matrix. Polyvinyl chloride (PVC) food packaging foil was used to develop the method, using a full factorial design with three parameters (nitric acid concentration (c(HNO₃)), temperature (T), and time (t)). According to this model, the best practical conditions were c(HNO₃) = 0.50 mol/L, T = 170 °C, and t = 5.00 min. Subsequently, the method was tested on five other plastics, namely high- and low-density polyethylene (HDPE and LDPE), polypropylene (PP), polystyrene (PS), and polyethylene terephthalate (PET), mixed with a food matrix, resulting in a mean plastic recovery of 102.2 ± 4.1%. Additionally, the polymers were not oxidised during the microwave digestion. For PVC and PS hardly any degradation was found, while HDPE, LDPE, and PP showed slight chain degradation, although without recovery loss. In conclusion, the method is an accurate approach to quantify the total meso- and microplastic content in food (waste) matrices with minimal change in their intrinsic characteristics.

Microplastic sample purification methods - Assessing detrimental effects of purification procedures on specific plastic types

In search of effective, fast, and cheap methods to purify environmental samples for microplastic analysis, scientific literature provides various purification protocols. However, while most of these protocols effectively purify the samples, some may also degrade the targeted polymers. This study was conducted to systematically compare the effects of purification protocols based on acidic, alkaline, oxidative, and enzymatic digestion and extraction via density separation on eight of the most relevant plastic types. It offers insights into how specific purification protocols may compromise microplastic detection by documenting visible and gravimetric effects, analyzing potential surface degradation using Fourier transform infrared spectroscopy (FTIR) and bulk erosion on a molecular level using gel permeation chromatography (GPC). For example, protocols using strong acids and high temperatures are likely to completely dissolve or cause strong degradation to a wide range of polymers (PA, PC, PET, PS, PUR & PVC), while strong alkaline solutions may damage PC and PET. Contrarily, Fenton's reagent, multiple enzymatic digestion steps, as well as treatment with a zinc chloride solution frequently used for density-separation, do not degrade the eight polymers tested here. Therefore, their implementation in microplastic sample processing may be considered an essential stepping-stone towards a standardized protocol for future microplastics analyses.

Microplastics detected in cirrhotic liver tissue

Background

The contamination of ecosystem compartments by microplastics (MPs) is an ubiquitous problem. MPs have been observed in mice tissues, and recently in human blood, stool and placenta. However, two aspects remain unclear: whether MPs accumulate in peripheral organs, specifically in the liver, and if liver cirrhosis favours this process. We aimed to examine human liver tissue samples to determine whether MPs accumulate in the liver.

Methods

This proof-of-concept case series, conducted in Germany, Europe, analyzed tissue samples of 6 patients with liver cirrhosis and 5 individuals without underlying liver disease. A total of 17 samples (11 liver, 3 kidney and 3 spleen samples) were analyzed according to the final protocol. A reliable method for detection of MP particles from 4 to 30 µm in human tissue was developed. Chemical digestion of tissue samples, staining with Nile red, subsequent fluorescent microscopy and Raman spectroscopy were performed. Morphology, size and composition of MP polymers were assessed.

Findings

Considering the limit of detection, all liver, kidney and spleen samples from patients without underlying liver disease tested negative for MPs. In contrast, MP concentrations in cirrhotic liver tissues tested positive and showed significantly higher concentrations compared to liver samples of individuals without underlying liver disease. Six different microplastic polymers ranging from 4 to 30 µm in size were detected.

Interpretation

This proof-of-concept case series assessed the presence of MPs in human liver tissue and found six different MP polymers in the liver of individuals with liver cirrhosis, but not in those without underlying liver disease. Future studies are needed to evaluate whether hepatic MP accumulation represents a potential cause in the pathogenesis of fibrosis, or a consequence of cirrhosis and portal hypertension.

Funding

No funding was received for conducting this investigator driven study.

Assessment, characterization, and quantification of microplastics from river sediments

Microplastic (MP), as a pollutant, is currently posing a biological hazard to the aquatic environment. The study aims to isolate, quantify, and characterize the MP pollutants in sediment samples from 14 study sites at Kaveri River, Killa Chinthamani, Tiruchirappalli, South India. With Sediment-MP Isolation (SMI) unit, density separation was done with a hydrogen peroxide solution. Four forms of MPs namely, fragments, films, foams, and fibers with orange, white, green, and saffron red were observed. The plenitude and distribution of four forms of MPs and natural substrates were geometrically independent, with large amounts of microfragments within the research region accounting for 79.72% variation by Principal Component Analysis. FT-IR analyses of MPs showed the presence of polyamide, polyethylene, polyethylene glycol, polyethylene terephthalate, polypropylene, and polystyrene. Additionally, the scanning electron microscopic analysis revealed that the MPs have differential surface morphology with rough surfaces, porous structures, fissures, and severe damage. Most MPs comprised Si, Mg, Cu, and Al, according to energy dispersive X-ray analyses. The combined SMI, instrumental analyses and evaluation (heat map) of MPs in river sediments help assess contamination levels and types of MPs. The findings might provide an insight into the status of MPs in Kavery River sediments that could help in formulating regulations for MPs reduction and contamination in rivers eventually to protect the environment.

Crack Patterns of Environmental Plastic Fragments

Secondary microplastics usually come from the breakdown of larger plastics due to weathering and environmental stress cracking of plastic wastes. In the present study, 5013 plastic fragments were collected from coastal beaches, estuary dikes, and lake banks in China. The fragment sizes ranged from 0.2 to 17.1 cm, and the dominant polymers were polypropylene and polyethylene. Cracks were observed on the surfaces of 49-56% of the fragments. Based on the extracted crack images, we proposed a general crack pattern system including four crack types with specific definitions, abbreviations, and symbols. The two-dimensional spectral analysis of the cracks suggests that the first three patterns showed good regularity and supported the rationality of the pattern system. Some crack metrics (e.g., line density) were closely correlated with the carbonyl index and additives (e.g., phthalate esters) of fragments. For crack investigation in field, we proposed a succinct protocol, in which five crack ranks were established to directly characterize the degree of cracking based on the line density values. The system was successfully applied to distinguish the differences in crack features at two representative sites, which indicates that crack pattern is a useful tool to describe the morphological changes of plastic surfaces in the environment.

Efficient Atmospheric Transport of Microplastics over Asia and Adjacent Oceans

We developed a regional atmospheric transport model for microplastics (MPs, 10 μm to 5 mm in size) over Asia and the adjacent Pacific and Indian oceans, accounting for MPs' size- and shape-dependent aerodynamics. The model was driven by tuned atmospheric emissions of MPs from the land and the ocean, and the simulations were evaluated against coastal (n = 19) and marine (n = 56) observations. Our tuned atmospheric emissions of MPs from Asia and the adjacent oceans were 310 Gg y^-1 (1 Gg = 1 kton) and 60 Gg y^-1, respectively. MP lines and fragments may be transported in the atmosphere >1000 km; MP pellets in our model mostly deposited near-source. We estimated that 1.4% of the MP mass emitted into the Asian atmosphere deposited into the oceans via atmospheric transport; the rest deposited over land. The resulting net atmospheric transported MP flux from Asia into the oceans was 3.9 Gg y^-1, twice as large as a previous estimate for the riverine-transported MP flux from Asia into the oceans. The uncertainty of our simulated atmospheric MP budget was between factors of 3 and 7. Our work highlighted the impacts of the size and morphology on the aerodynamics of MPs and the importance of atmospheric transport in the source-to-sink relationship of global MP pollution.

Microplastic ingestion by commercial marine fish from the seawater of Northwest Peninsular Malaysia

Over the past decade, concerns over microplastic pollution in the marine ecosystem has increasingly gained more attention, but research investigating the ingestion of microplastics by marine fish in Malaysia is still regrettably lacking. This study investigated the microplastic presence, abundance, and morphological types within the guts of four species of commercial marine fish (Atule mate, Crenimugil seheli, Sardinella fimbriata and Rastrelliger brachysoma) caught in seawater off the coast of Malaysia's Northwest Peninsular. A total of 72 individual commercial marine fish guts from four species (fish per species n = 18) were examined. Remarkably, this study found that 100% of the samples contained microplastics. A total number of 432 microplastics (size < 5 mm) from the four species were found in the excised marine fish guts. The most common type of microplastic discovered was fragment, which accounted for 49.5% of all microplastics present. The gut microplastic content differed between species. Sardinella fimbriata recorded the greatest amount of microplastic ingestion, with an average microplastic count of 6.5 (±4.3) items per individual fish. However, there were no statistically significant differences found when comparing study species and different locations. SEM-EDX analysis confirmed the presence of microplastic particles by identifying the chemical elements found in the samples. Since the four studied species of commercial marine fish are popular protein sources in Malaysians' daily diet, this study suggests potential microplastic exposure to humans via contaminated fish consumption in Malaysia, which was previously unknown. Based on previous scientific evidence, this study also demonstrates the high probability of microplastic ingestion in marine fish in the Malaysian seawater, which could have an adverse effect on fish health as well as marine biota.

Temporal Variability of Microparticles Under the Seattle Aquarium, Washington State: Documenting the Global Covid-19 Pandemic

Anthropogenic debris including microparticles (<5 mm) are ubiquitous in marine environments. The Salish Sea experiences seasonal fluctuations in precipitation, river discharge, sewage overflow events, and tourism-all variables previously thought to have an impact on microparticle transport and concentrations. Our goals are two-fold: 1) describe long-term microparticle contamination data including concentration, type, and size; and 2) determine if seasonal microparticle concentrations are dependent on environmental or tourism variables in Elliott Bay, Salish Sea. We sampled 100 L of seawater at a depth of approximately 9 m at the Seattle Aquarium, Seattle, Washington State, United States, approximately every two weeks from 2019 through 2020 and used an oil extraction protocol to separate microparticles. We found that microparticle concentrations ranged from 0 to 0.64 particles L^-1 and fibers were the most common type observed. Microparticle concentrations exhibited a breakpoint on 10 April 2020, where estimated slope and associated microparticle concentration significantly declined. Further, when considering both environmental as well as tourism variables, temporal microparticle concentration was best described by a mixed-effects model, with tourism as the fixed effect and the person counting microparticles as the random effect. Although monitoring efforts presented set out to identify effects of seasonality and interannual differences in microparticle concentrations, it instead captured an effect of decreased tourism due to the global Covid-19 pandemic. Long-term monitoring is critical to establish temporal microparticle concentrations and to help researchers understand if there are certain events, both seasonal and sporadic (e.g., rain events, tourism, or global pandemics), when the marine environment is more at risk from anthropogenic pollution. Environ Toxicol Chem 2022;41:917-930. © 2021 Seattle Aquarium. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Effects of Polyester Microplastic Fiber Contamination on Amphibian-Trematode Interactions

Microplastic contamination poses a global threat to aquatic organisms, yet we know little as to how microplastics may indirectly affect organismal health via their influence on species-species interactions (e.g., host-parasite interactions). This is problematic because microplastic-mediated alterations to host-parasite dynamics could negatively impact individual- population-level health of hosts. Using a larval amphibian (host) and free-living trematode (parasite) model, we asked whether 1) polyester microplastic fibers influence parasite survival; 2) whether polyester microplastic fiber ingestion by amphibians alters amphibian susceptibility to infection; and 3) whether simultaneous exposure of amphibians and trematodes to polyester microplastic fibers influences infection outcomes. Polyester microplastic fibers did not alter trematode survival, nor did their ingestion by amphibians increase amphibian susceptibility to infection. However, when amphibians and trematodes were exposed simultaneously to the fibers, the infection success of the parasite was reduced. Lastly, we conducted a field survey for microfiber contamination across multiple ponds and found microfibers across each of the sampled ponds. Overall, our results contribute to the limited knowledge surrounding the ecological consequences of microplastic contamination. Environ Toxicol Chem 2022;41:869-879. © 2021 SETAC.