Use of biomimetic forward osmosis membrane for trace organics removal

Advancement of membrane separation technology for organic pollutant removal

In the face of growing global freshwater scarcity, the imperative to recycle and reuse water becomes increasingly apparent across industrial, agricultural, and domestic sectors. Eliminating a range of organic pollutants in wastewater, from pesticides to industrial byproducts, presents a formidable challenge. Among the potential solutions, membrane technologies emerge as promising contenders for treating diverse organic contaminants from industrial, agricultural, and household origins. This paper explores cutting-edge membrane-based approaches, including reverse osmosis, nanofiltration, ultrafiltration, microfiltration, gas separation membranes, and pervaporation. Each technology's efficacy in removing distinct organic pollutants while producing purified water is scrutinized. This review delves into membrane fouling, discussing its influencing factors and preventative strategies. It sheds light on the merits, limitations, and prospects of these various membrane techniques, contributing to the advancement of wastewater treatment. It advocates for future research in membrane technology with a focus on fouling control and the development of energy-efficient devices. Interdisciplinary collaboration among researchers, engineers, policymakers, and industry players is vital for shaping water purification innovation. Ongoing research and collaboration position us to fulfill the promise of accessible, clean water for all.

Recent advances in surface tailoring of thin film forward osmosis membranes: A review

The recent advancements in fabricating forward osmosis (FO) membranes have shown promising results in desalination and water treatment. Different methods have been applied to improve FO performance, such as using mixed or new draw solutions, enhancing the recovery of draw solutions, membrane modification, and developing FO-hybrid systems. However, reliable methods to address the current issues, including reverse salt flux, fouling, and antibacterial activities, are still in progress. In recent decades, surface modification has been applied to different membrane processes, including FO membranes. Introducing nanochannels, bioparticles, new monomers, and hydrophilic-based materials to the surface layer of FO membranes has significantly impacted their performance and efficiency and resulted in better control over fouling and concentration polarization (CP) in these membranes. This review critically investigates the recent developments in FO membrane processes and fabrication techniques for FO surface-layer modification. In addition, this study focuses on the latest materials and structures used for the surface modification of FO membranes. Finally, the current challenges, gaps, and suggestions for future studies in this field have been discussed in detail.

Forward Osmosis Application for the Removal of Emerging Contaminants from Municipal Wastewater: A Review

Forward osmosis (FO) has attracted special attention in water and wastewater treatment due to its role in addressing the challenges of water scarcity and contamination. The presence of emerging contaminants in water sources raises concerns regarding their environmental and public health impacts. Conventional wastewater treatment methods cannot effectively remove these contaminants; thus, innovative approaches are required. FO membranes offer a promising solution for wastewater treatment and removal of the contaminants in wastewater. Several factors influence the performance of FO processes, including concentration polarization, membrane fouling, draw solute selection, and reverse salt flux. Therefore, understanding and optimizing these factors are crucial aspects for improving the efficiency and sustainability of the FO process. This review stresses the need for research to explore the potential and challenges of FO membranes to meet municipal wastewater treatment requirements, to optimize the process, to reduce energy consumption, and to promote scalability for potential industrial applications. In conclusion, FO shows promising performance for wastewater treatment, dealing with emerging pollutants and contributing to sustainable practices. By improving the FO process and addressing its challenges, we could contribute to improve the availability of water resources amid the global water scarcity concerns, as well as contribute to the circular economy.

Rectifying disorder of extracellular matrix to suppress urethral stricture by protein nanofilm-controlled drug delivery from urinary catheter

Urethral stricture secondary to urethral injury, afflicting both patients and urologists, is initiated by excessive deposition of extracellular matrix in the submucosal and periurethral tissues. Although various anti-fibrotic drugs have been applied to urethral stricture by irrigation or submucosal injection, their clinical feasibility and effectiveness are limited. Here, to target the pathological state of the extracellular matrix, we design a protein-based nanofilm-controlled drug delivery system and assemble it on the catheter. This approach, which integrates excellent anti-biofilm properties with stable and controlled drug delivery for tens of days in one step, ensures optimal efficacy and negligible side effects while preventing biofilm-related infections. In a rabbit model of urethral injury, the anti-fibrotic catheter maintains extracellular matrix homeostasis by reducing fibroblast-derived collagen production and enhancing metalloproteinase 1-induced collagen degradation, resulting in a greater improvement in lumen stenosis than other topical therapies for urethral stricture prevention. Such facilely fabricated biocompatible coating with antibacterial contamination and sustained-drug-release functionality could not only benefit populations at high risk of urethral stricture but also serve as an advanced paradigm for a range of biomedical applications.

Membrane technology for pesticide removal from aquatic environment: Status quo and way forward

The noxious side effects of pesticides on human health and environment have prompted the search of effective and reliable treatment techniques for pesticide removal. The removal of pesticides can be accomplished through physical, chemical and biologicals. Physical approaches such as filtration and adsorption are prevailing pesticide removal strategies on account of their effectiveness and ease of operation. Membrane-based filtration technology has been recognized as a promising water and wastewater treatment approach that can be used for a wide range of organic micropollutants including pesticides. Nanofiltration (NF), reverse osmosis (RO) and forward osmosis (FO) have been increasingly explored for pesticide removal from aquatic environment owing to their versatility and high treatment efficiencies. This review looks into the remedial strategies of pesticides from aqueous environment using membrane-based processes. The potentials and applications of three prevailing membrane processes, namely NF, RO and FO for the treatment of pesticide-containing wastewater are discussed in terms of the development of advanced membranes, separation mechanisms and system design. The challenges in regards to the practical implementation of membrane-based processes for pesticide remediation are identified. The corresponding research directions and way forward are highlighted. An in depth understanding of the pesticide nature, water chemistry and the pesticide-membrane interactions is the key to achieving high pesticide removal efficiency. The integration of membrane technology and conventional removal technologies represents a new dimension and the future direction for the treatment of wastewater containing recalcitrant pesticides.

Micropollutant removal capacity and stability of aquaporin incorporated biomimetic thin-film composite membranes

•

Aquaporins increase the micropollutant removal capacity of TFC nanofiltration membranes.

•

Biomimetic membrane prepared with Halomonas elongata aquaporin is applicable for micropollutant rejection.

•

Aquaporin incorporated membrane is stable for six months period.

•

Type of aquaporin and pore size of the membrane affect micropollutant rejection rates.

Aquaporin incorporated nanofiltration membranes have high potential for future applications on separation processes. In this study, performance of biomimetic thin-film composite membranes containing Halomonas elongata and Escherichia coli aquaporins with different affinity tags for the removal of micropollutants was investigated.% rejection of the membranes for atrazine, terbutryn, triclosan, and diuron varied between 66.7% and 90.3% depending on the type of aquaporin and micropollutant. The highest removal rate was achieved with a membrane containing H. elongata aquaporin for atrazine and terbutryn which have methyl branching in their structure. Electrostatic interactions between micropollutants, thin-film layer of the membrane, and tags of aquaporins may also play important role in rejection of micropollutants. Stability experiments showed that biomimetic membranes can be used for six months period without a remarkable decrease in% rejection. Membrane used 24 times for atrazine removal for a year period lost most of its ability to repel atrazine.

A Comprehensive Review on Forward Osmosis Water Treatment: Recent Advances and Prospects of Membranes and Draw Solutes

Forward osmosis (FO) is an evolving membrane separation technology for water treatment and reclamation. However, FO water treatment technology is limited by factors such as concentration polarization, membrane fouling, and reverse solute flux. Therefore, it is of a great importance to prepare an efficient high-density porous membrane and to select an appropriate draw solute to reduce concentration polarization, membrane fouling, and reverse solute flux. This review aims to present a thorough evaluation of the advancement of different draw solutes and membranes with their effects on FO performance. NaCl is still widely used in a large number of studies, and several general draw solutes, such as organic-based and inorganic-based, are selected based on their osmotic pressure and water solubility. The selection criteria for reusable solutes, such as heat-recovered gaseous draw, magnetic field-recovered MNPs, and electrically or thermally-responsive hydrogel are primarily based on their industrial efficiency and energy requirements. CA membranes are resistant to chlorine degradation and are hydrophilic, while TFC/TFN exhibit a high inhibition of bio-adhesion and hydrolysis. AQPs are emerging membranes, due to proteins with complete retention capacity. Moreover, the development of the hybrid system combining FO with other energy or water treatment technologies is crucial to the sustainability of FO.

Forward osmosis dewatering of seawater and pesticide contaminated effluents using the commercial fertilizers and zinc-nitrate blend draw solutions

Fertilizer driven forward osmosis (FDFO) process would be feasible due to the possible prevention of the drainage of dewatered and concentrated pesticide effluent from agricultural pesticide industries to the environment. Instead, it would be possible to return the concentrated pesticide solution to the processing cycle, and on the other hand, employ directly the obtained diluted fertilizer draw solution for irrigation. This study investigated the performance of zinc-nitrate/amino-acids blends as fertilizer type draw solution, and distilled water, saline water (seawater), and synthetic wastewater containing pesticides as feed. The results indicated that the synergetic effect of blended type fertilizer presented significantly higher osmotic pressure and water flux than the sum of their individual ones, especially when the amount of amino acid increased. Conversely, an ignorable reverse flux of blended fertilizer draw solute was observed. The fertilizer blend with a molar ratio of 1:6 zinc-nitrate/amino-acid achieved the higher average fluxes of 34.7 and 23.92 L/m²h from distilled and saline waters compared to common draw solutions such as metal salts. Furthermore, the FDFO exhibited a high rejection (over 99%) of bentazon and imidacloprid in feed solutions compared to other agricultural pesticides due to their larger molecular weight and molecular size. The applied FDFO represented a significant reduction in specific energy consumption (from 0.17 to 0.049 kWh/m³) in a bench-scale setup as compared to the RO process almost at the same water permeation flux and the rejection of bentazon.

Membrane technologies in toilet urine treatment for toilet urine resource utilization: a review

Membrane technologies have broad potential in methods for separating, collecting, storing, and utilizing urine collected from toilets. Recovering urine from toilets for resource utilization instead of treating it in a sewage treatment plant not only reduces extra energy consumption for the degradation of N and P but also saves energy in chemical fertilizer production, which will contribute to carbon emission reduction of 12.19-17.82 kg kgN -1 in terms of N alone. Due to its high efficiency in terms of volume reduction, water recycling, nutrient recovery, and pollutant removal, membrane technology is a promising technology for resource utilization from urine collected from toilets. In this review, we divide membrane technologies for resource utilization from urine collected from toilets into four categories based on the driving force: external pressure-driven membrane technology, vapor pressure-driven membrane technology, chemical potential-driven membrane technology, and electric field-driven membrane technology. These technologies influence factors such as: recovery targets and mechanisms, reaction condition optimization, and process efficiency, and these are all discussed in this review. Finally, a toilet with source-separation is suggested. In the future, membrane technology research should focus on the practical application of source-separation toilets, membrane fouling prevention, and energy consumption evaluation. This review may provide theoretical support for the resource utilization of urine collected from toilets that is based on membrane technology.

A Critical Review on Electric Field-Assisted Membrane Processes: Implications for Fouling Control, Water Recovery, and Future Prospects

Electrofiltration, an electric field-assisted membrane process, has been a research topic of growing popularity due to its ability to improve membrane performance by providing in situ antifouling conditions in a membrane system. The number of reports on electrofiltration have increased exponentially over the past two decades. These reports explored many innovations, such as novel configurations of an electric field, engineered membrane materials, and interesting designs of foulant compositions and membrane modules. Recent electrofiltration literature focused mainly on compiling results without a comprehensive comparative analysis across different works. The main objective of this critical review is to, first, organize, compare and contrast the results across various electrofiltration studies; second, discuss various types of mechanisms that could be incorporated into electrofiltration and their effect on membrane system performance; third, characterize electrofiltration phenomenon; fourth, interpret the effects of various operational conditions on the performance of electrofiltration; fifth, evaluate the state-of-the-art knowledge associated with modeling efforts in electrofiltration; sixth, discuss the energy costs related to the implementation of electrofiltration; and finally, identify the current knowledge gaps that hinder the transition of the lab-scale observations to industry-scale electrofiltration as well as the future prospects of electrofiltration.

Water Transport and Ion Diffusion Investigation of an Amphotericin B-Based Channel Applied to Forward Osmosis: A Simulation Study

The use of an Amphotericin B_Ergosterol (AmBEr) channel as an artificial water channel in forward osmosis filtration (FO) was studied via molecular dynamics (MD) simulation. Three channel models were constructed: a common AmBEr channel and two modified C3deOAmB_Ergosterol (C3deOAmBEr) channels with different diameters (12 Å and 18 Å). During FO filtration simulation, the osmotic pressure of salt-water was a driving force for water permeation. We examined the effect of the modified C3deOAmBEr channel on the water transport performance. By tracing the change of the number of water molecules along with simulation time in the saltwater region, the water permeability of the channel models could be calculated. A higher water permeability was observed for a modified C3deOAmBEr channel, and there was no ion permeation during the entire simulation period. The hydrated ions and water molecules were placed into the channel to explore the ion leakage behavior of the channels. The mean squared displacement (MSD) of ions and water molecules was obtained to study the ion leakage performance. The Amphotericin B-based channels showed excellent selectivity of water molecules against ions. The results obtained on an atomistic scale could assist in determining the properties and the optimal filtration applications for Amphotericin B-based channels.

Laboratory and pilot evaluation of aquaporin-based forward osmosis membranes for rejection of micropollutants

Aquaporin-based forward osmosis (AQP FO) membranes were applied both in laboratory- and pilot-scale for removing micropollutants from water. The effect of operating parameters (feed flow, draw flow, and transmembrane pressure) on the i) rejection of micropollutants, ii) water flux, iii) reverse salt flux, and iv) water recovery of the AQP FO membrane modules was studied. Among the 21 micropollutants spiked, only four compounds, atenolol, propranolol, metoprolol, and citalopram, permeated through the AQP FO membranes to an extent that they could be quantified in the draw solutions of both the laboratory and pilot systems. The rejection rates, based on the full mass balance calculations, were between 96.1% and 99.7%, and all the other 17 compounds showed rejection exceeding 90% on both systems. The pilot AQP FO system was further employed for six days to treat effluent from a membrane bioreactor (MBR) treating municipal wastewater. 35 micropollutants were investigated. 27 of these were identified and quantified in the MBR effluent. Minute fractions of gabapentin, benzotriazole, and metoprolol were detected passing through the AQP FO membranes into the draw side with a constant rejection of around 99.2%, 95.4%, and 99.9%. Almost all other micropollutants' minimum rejection rates exceeded 80%.

Modeling the transport of neutral disinfection byproducts in forward osmosis: Roles of reverse salt flux

The rejection of disinfection byproducts (DBPs) is an important consideration for the application of forward osmosis (FO) in wastewater recycling. However, the transport of organic compounds in FO is not well predicted by existing models, partially because these models have not incorporated the effect of reverse salt flux, a phenomenon previously shown to influence the transport of pharmaceutical compounds. In this study, we investigated the effects of reverse salt flux on DBP transport in FO and the corresponding mechanisms. We used a commercial Aquaporin membrane and tested sixteen DBPs relevant to wastewater recycling. Using draw solutions constituted by NaCl, MgSO₄, or glucose in a bench-scale FO system, we first confirmed that higher reverse salt flux resulted in lower DBP permeance. By integrating results from the bench-scale FO system and those from diffusion cell tests, we showed that two mechanisms contributed to the hindered DBP transport: the steric hindrance in the active layer caused by the presence of the draw solute and the retarded diffusion of DBPs in the support layer via a "salting-out" effect. Lastly, we developed a modified solution-diffusion model incorporating these two mechanisms by accounting for the free volume occupied by draw solute molecules in the active layer and by introducing the Setschenow constant, respectively. The modified model significantly improved the prediction of permeance for halogenated DBPs, and revealed the relative importance of steric hindrance (dominant for large DBPs) and retarded diffusion (dominant for hydrophobic DBPs). The modified model did not accurately predict the permeance of nitrosamines, attributable to their extremely high hydrophilicity or large size.

Determination of the effect of proteoliposome concentration on Aquaporin Z incorporated nanofiltration membranes

We report on the fabrication of AqpZ immobilized flat sheet membranes. The effects of interfacial polymerization conditions as well as proteoliposome concentration were evaluated. Commercial AqpZ were used as positive control for cloned AqpZ. Specific permeate flux of membranes at higher proteoliposome concentrations increased up to 25 times higher than thin film composite membranes; however; MgSO₄ rejection is lowered almost to 1.5%. FTIR and SEM confirm immobilization of proteoliposomes. Thermal analysis showed that increasing proteoliposome concentration has no positive effect on the incorporation of proteoliposomes into polyamide structures. On the contrary, at lower proteoliposome concentrations, incorporation of proteoliposomes was found better. When combined membrane performances were compared in terms of specific permeate flux; MgSO₄ and humic rejection and flux recovery after humic acid filtration, the performance of cloned AqpZ incorporated membranes (having 0.1 mg/mL proteoliposome concentration and polyamide formed with 2 min piperazine reaction time) improved 1.7 times regarding TFC membranes. According to the results, increasing proteoliposome concentration did not improve nanofiltration membrane performance. On the contrary, lower proteoliposome concentrations were found to be more effective in increasing membrane performance.

Removal of trace organic contaminants by melamine-tuned highly cross-linked polyamide TFC membranes

In recent years, forward osmosis (FO) has represented numerous potential applications in safe water production. In this study, we improved the performance of FO thin film composite (TFC) membranes for the removal of trace organic compounds (TOrCs) by tuning the chemistry of its top active layer. The TFC membranes were synthesized by interfacial polymerization (IP) reaction between amine-containing monomers, e.g., meta-phenylene diamine (MPD) or para-phenylenediamine (PPD), and an acid chloride monomer, e.g., trimesoyl chloride (TMC). Owing to three free amine functionals over main core, melamine was used in the amine monomers solution to increase cross-linking among polyamide chains. Chemical and morphological characterization of the prepared membranes confirmed that melamine was successfully incorporated into the chemical structure of the top PA layer. Two agricultural toxic materials (atrazine and diazinon) were used to investigate the capability of the newly fabricated membranes in the removal of TOrCs. The obtained results showed that melamine-improved FO membranes provided higher atrazine and diazinon rejections in two different FO membrane configurations, including active layer facing feed solution (ALF) and active layer facing draw solution (ALD). The highest rejections of both diazinon (99.4%) and atrazine (97.3%) were achieved when the melamine modified MPD-based membrane served in ALF mode with 2 M NaCl as a draw solution.

Enhancing the removal efficiency of osmotic membrane bioreactors: A comprehensive review of influencing parameters and hybrid configurations

The amount of research conducted on osmotic membrane bioreactors (OMBRs) has increased over the past decade because of the advantages of these reactors over conventional membrane bioreactors (MBRs). OMBR process is a hybrid process involving a forward osmosis membrane and biologically activated sludge. It is a promising technology to reduce membrane fouling, enhance effluent water quality, and lower energy consumption compared to conventional MBR processes. Eleven years since the OMBR process was first proposed, about 60 papers regarding the OMBR process have been published. In this article, we address recent advances in OMBR technology based on a review of the literature. Typical factors that influence the performance of the OMBR process are discussed to provide a clear understanding of the current state of this technology. We also provide a critical review of OMBR applications in organic matter, nutrient, and micropollutant removal as well as direct recovery of nutrients from wastewater. We propose several hybrid configurations that can enhance the removal efficiency of OMBR systems. Finally, we present potential research directions for future OMBR research.

Mitigation of bidirectional solute flux in forward osmosis via membrane surface coating of zwitterion functionalized carbon nanotubes

Forward osmosis (FO) has emerged as a promising membrane technology to yield high-quality reusable water from various water sources. A key challenge to be solved is the bidirectional solute flux (BSF), including reverse solute flux (RSF) and forward solute flux (FSF). Herein, zwitterion functionalized carbon nanotubes (Z-CNTs) have been coated onto a commercial thin film composite (TFC) membrane, resulting in BSF mitigation via both electrostatic repulsion forces induced by zwitterionic functional groups and steric interactions with CNTs. At a coating density of 0.97 g m^-2, a significantly reduced specific RSF was observed for multiple draw solutes, including NaCl (55.5% reduction), NH₄H₂PO₄ (83.8%), (NH₄)₂HPO₄ (74.5%), NH₄Cl (70.8%), and NH₄HCO₃ (61.9%). When a synthetic wastewater was applied as the feed to investigate membrane rejection, FSF was notably reduced by using the coated membrane with fewer pollutants leaked to the draw solution, including NH₄⁺-N (46.3% reduction), NO₂^--N (37.0%), NO₃^--N (30.3%), K⁺ (56.1%), PO₄^3--P (100%), and Mg²⁺ (100%). When fed with real wastewater, a consistent water flux was achieved during semi-continuous operation with enhanced fouling resistance. This study is among the earliest efforts to address BSF control via membrane modification, and the results will encourage further exploration of effective strategies to reduce BSF.

Recent Progresses of Forward Osmosis Membranes Formulation and Design for Wastewater Treatment

Production of potable water or reclaimed water with higher quality are in demand to address water scarcity issues as well as to meet the expectation of stringent water quality standards. Forward osmosis (FO) provides a highly promising platform for energy-efficient membrane-based separation technology. This emerging technology has been recognized as a potential and cost-competitive alternative for many conventional wastewater treatment technologies. Motivated by its advantages over existing wastewater treatment technologies, the interest of applying FO technology for wastewater treatment has increased significantly in recent years. This article focuses on the recent developments and innovations in FO for wastewater treatment. An overview of the potential of FO in various wastewater treatment application will be first presented. The contemporary strategies used in membrane designs and fabrications as well as the efforts made to address membrane fouling are comprehensively reviewed. Finally, the challenges and future outlook of FO for wastewater treatment are highlighted.

Desalination of brackish groundwater and reuse of wastewater by forward osmosis coupled with nanofiltration for draw solution recovery

This study evaluates a treatment system centered on forward osmosis (FO) to extract high-quality water from real brackish groundwater and wastewater. The groundwater had salinity of 4 g/L, while the wastewater sample consisted of a secondary effluent. These feed solutions were treated first in a FO step, achieving a recovery of >60%. Subsequently, the diluted draw solutions were subject to a nanofiltration (NF) step to regenerate their original osmotic pressure and to simultaneously collect a final permeate product. Magnesium chloride and sodium sulfate were both suitable draw solutes for this application. MgCl₂ had a larger specific reverse salt flux and induced a more pronounced fouling-related flux decline with groundwater samples. Na₂SO₄ was re-concentrated with a higher permeability NF membrane but may require the use of anti-scalants. The average fluxes obtained in high-recovery batch FO were between 5 and 11 L m^-2h^-1 with an initial bulk draw osmotic pressure in the range of 12-15 bar. Relatively low flux decline was observed in fouling experiments with both samples, while physical cleaning proved promising to recover the related loss in productivity. The final product waters were all of very high quality, suggesting the potential of this coupled system for water reuse and desalination. Some challenges related to the relatively low water flux in the FO step, as well as the loss of draw solutes and the gradual change in composition of the draw solution, need further analysis to establish the technical and economic feasibility of the system.

Relating solute properties of contaminants of emerging concern and their rejection by forward osmosis membrane

To elucidate the transport of emerging contaminants (CECs) in forward osmosis (FO) membrane process according to their solute properties, the rejections of CECs with various molecular weight, octanol/water partition coefficient (log Kow), and dissociation constant (pK_a) were investigated. Among 12 selected CECs, negatively charged CECs exhibited the highest rejection efficiency than neutral or positively charged CECs due to the electrostatic repulsion between negatively charged CECs and membrane surfaces as well as diffusional hindrance by reversely transported salts from draw stream. The statistical analysis showed that the molecular weight was strongly correlated with the rejection of neutral CECs by size exclusion. Moreover, the correlation between adsorption and log Kow value of neutral CECs was observed due to the hydrophobic interaction. Positively charged CECs exhibited higher adsorption, but lower rejection than the negatively charged CECs due to the locally increased concentration by adsorption, and subsequent migration in FO membrane.

Potable Water Reuse through Advanced Membrane Technology

Recycling water from municipal wastewater offers a reliable and sustainable solution to cities and regions facing shortage of water supply. Places including California and Singapore have developed advanced water reuse programs as an integral part of their water management strategy. Membrane technology, particularly reverse osmosis, has been playing a key role in producing high quality recycled water. This feature paper highlights the current status and future perspectives of advanced membrane processes to meet potable water reuse. Recent advances in membrane materials and process configurations are presented and opportunities and challenges are identified in the context of water reuse.

Seeing is believing: Insights from synchrotron infrared mapping for membrane fouling in osmotic membrane bioreactors

We employed synchrotron infrared (IR) mapping to resolve forward osmosis (FO) membrane fouling in osmotic membrane bioreactor (OMBR). Synchrotron IR mapping offers a unique perspective to elucidate the fouling mechanisms and associated consequences in OMBR operation. We demonstrated the spatial distribution and relative intensity of carbohydrate and protein longitudinally along of the fouled FO membrane at the conclusion of OMBR operation. Both transmission and attenuated total reflection (ATR) modes were used to map the cross-section and surface of the fouled FO membrane. Micro X-ray computed tomography revealed patchy, "sand-dune" features on the membrane surface at the conclusion of OMBR operation. Synchrotron IR-ATR mapping demonstrated that the development of membrane fouling layer in OMBR operation was initiated by polysaccharide-like carbohydrate, followed by layering with protein-like substance, resulting in a characteristic "sand-dune" three dimensional feature. Synchrotron FTIR mapping shed light on foulant occurrence and accumulation in the draw solution. Strong penetration of protein-like substance into membrane matrix was visualised, resulting the detection of protein adsorption in the region of membrane supporting layer.

Trace organic contaminant rejection by aquaporin forward osmosis membrane: Transport mechanisms and membrane stability

We investigated transport mechanisms of trace organic contaminants (TrOCs) through aquaporin thin-film composite forward osmosis (FO) membrane, and membrane stability under extreme conditions with respect to TrOC rejections. Morphology and surface chemistry of the aquaporin membrane were characterised to identify the incorporation of aquaporin vesicles into membrane active layer. Pore hindrance model was used to estimate aquaporin membrane pore size as well as to describe TrOC transport. TrOC transport mechanisms were revealed by varying concentration and type of draw solutions. Experimental results showed that mechanism of TrOC transport through aquaporin-embedded FO membrane was dominated by solution-diffusion mechanism. Non-ionic TrOC rejections were molecular-weight dependent, suggesting steric hindrance mechanisms. On the other hand, ionic TrOC rejections were less sensitive to molecular size, indicating electrostatic interaction. TrOC transport through aquaporin membrane was also subjected to retarded forward diffusion where reverse draw solute flux could hinder the forward diffusion of feed TrOC solutes, reducing their permeation through the FO membrane. Aquaporin membrane stability was demonstrated by either heat treatment or ethanol solvent challenges. Thermal stability of the aquaporin membrane was manifested as a relatively unchanged TrOC rejection before and after the heat treatment challenge test. By contrast, ethanol solvent challenge resulted in a decrease in TrOC rejection, which was evident by the disappearance of the lipid tail of the aquaporin vesicles from infrared spectrum and a notable decrease in the membrane pore size.

Concentrating molasses distillery wastewater using biomimetic forward osmosis (FO) membranes

Treatment of sugarcane molasses distillery wastewater is challenging due to the presence of complex phenolic compounds (melanoidins and polyphenols) having antioxidant properties. Due to zero liquid discharge regulations, Indian distilleries continue to explore effective treatment options. This work examines the concentration of distillery wastewater by forward osmosis (FO) using aquaporin biomimetic membranes and magnesium chloride hexahydrate (MgCl₂.6H₂O) as draw solution. The operational parameters viz. feed solution and draw solution flow rate and draw solution concentration were optimized using 10% v/v melanoidins model feed solution. This was followed by trials with distillery wastewater. Under the conditions of this work, feed and draw flow rates of 1 L/min and draw solution concentration of 2M MgCl₂.6H₂O for melanoidins model solution and 3M MgCl₂.6H₂O for distillery wastewater were optimal for maximum rejection. Rejection of 90% melanoidins, 96% antioxidant activity and 84% COD was obtained with melanoidins model feed, with a corresponding water flux of 6.3 L/m²h. With as-received distillery wastewater, the rejection was similar (85-90%) to the melanoidins solution, but the water flux was lower (2.8 L/m²h). Water recovery from distillery wastewater over 24 h study period was higher with FO (70%) than reported for RO (35-45%). Repeated use of the FO membrane over five consecutive 24 h cycles with fresh feed and draw solutions and periodic cleaning showed consistent average water flux and rejection of the feed constituents.

Biomimetic aquaporin membranes for osmotic membrane bioreactors: Membrane performance and contaminant removal

In this study, we investigated the performance of an osmotic membrane bioreactor (OMBR) enabled by a novel biomimetic aquaporin forward osmosis (FO) membrane. Membrane performance and removal of 30 trace organic contaminants (TrOCs) were examined. Results show that the aquaporin FO membrane had better transport properties in comparison with conventional cellulose triacetate and polyamide thin-film composite FO membranes. In particular, the aquaporin FO membrane exhibited much lower salt permeability and thus smaller reverse salt flux, resulting in a less severe salinity build-up in the bioreactor during OMBR operation. During OMBR operation, the aquaporin FO membrane well complemented biological treatment for stable and excellent contaminant removal. All 30 TrOCs selected here were removed by over 85% regardless of their diverse properties. Such high and stable contaminant removal over OMBR operation also indicates the stability and compatibility of the aquaporin FO membrane in combination with activated sludge treatment.

Evaluation of direct membrane filtration and direct forward osmosis as concepts for compact and energy-positive municipal wastewater treatment

Municipal wastewater treatment commonly involves mechanical, biological and chemical treatment steps to protect humans and the environment from adverse effects. Membrane technology has gained increasing attention as an alternative to conventional wastewater treatment due to increased urbanization. Among the available membrane technologies, microfiltration (MF) and forward osmosis (FO) have been selected for this study due to their specific characteristics, such as compactness and efficient removal of particles. In this study, two treatment concepts were evaluated with regard to their specific electricity, energy and area demands. Both concepts would fulfil the Swedish discharge demands for small- and medium-sized wastewater treatment plants at full scale: (1) direct MF and (2) direct FO with seawater as the draw solution. The framework of this study is based on a combination of data obtained from bench- and pilot-scale experiments applying direct MF and FO, respectively. Additionally, available complementary data from a Swedish full-scale wastewater treatment plant and the literature were used to evaluate the concepts in depth. The results of this study indicate that both concepts are net positive with respect to electricity and energy, as more biogas can be produced compared to that using conventional wastewater treatment. Furthermore, the specific area demand is significantly reduced. This study demonstrates that municipal wastewater could be treated in a more energy- and area-efficient manner with techniques that are already commercially available and with future membrane technology.

Binding TiO2 nanoparticles to forward osmosis membranes via MEMO–PMMA–Br monomer chains for enhanced filtration and antifouling performance

Forward osmosis (FO) has attracted increasing interest in various applications for water and wastewater treatment and reuse. However, drawbacks caused by its lower-than-expected flux performance and fouling issues remain bottlenecks that limit the wider applications of FO technology. In this research, titanium dioxide (TiO₂) nanoparticles were grafted onto two commercially available FO membranes, a cellulose triacetate (CTA) membrane and an aquaporin (AqP) membrane, through a specially designed 3-(trimethoxysilyl)propyl methacrylate–polymethyl methacrylate–bromide (MEMO–PMMA–Br) monomer chain, to improve the filtration performance with regard to pure water flux and organic fouling resistance. The success of the surface coating method was verified using FT-IR, SEM-EDX, and AFM. Approximately 30% titanium coverage was obtained for both FO membranes. A reduction of the contact angle on the modified CTA membrane surface indicated enhanced water permeability and antifouling performance. An adverse effect on the surface hydrophilicity of the modified AqP membrane may be attributed to the obstruction of aquaporins from the feed solution due to the coverage of MEMO–PMMA–Br monomers and TiO₂ nanoparticles. The pure water flux of both membranes was significantly improved, with average flux increases of 73.4% and 13.6% identified for the modified CTA and AqP membranes, respectively. In addition, the antifouling performance of the AqP membrane was greatly enhanced after surface modification, attributed to the integrated effects of foulant photodegradation (catalyzed by TiO₂ nanoparticles at the interface) and the prevention of functional water channels being blocked by organic foulants due to TiO₂ coverage.

Commercial forward osmosis membranes were modified by TiO₂ nanoparticles. A designed MEMO–PMMA–Br monomer chain to reduce the damage on polymer membrane by TiO₂. Water permeability and fouling resistance were significantly improved.

The effects of physicochemical wastewater treatment operations on forward osmosis

Raw municipal wastewater from a full-scale wastewater treatment plant was physicochemically pretreated in a large pilot-scale system comprising coagulation, flocculation, microsieve and microfiltration operated in various configurations. The produced microsieve filtrates and microfiltration permeates were then concentrated using forward osmosis (FO). Aquaporin Inside^TM FO membranes were used for both the microsieve filtrate and microfiltration permeates, and Hydration Technologies Inc.-thin-film composite membranes for the microfiltration permeate using only NaCl as the draw solution. The FO performance was evaluated in terms of the water flux, water flux decline and solute rejections of biochemical oxygen demand, and total and soluble phosphorus. The obtained results were compared with the results of FO after only mechanical pretreatment. The FO permeates satisfied the Swedish discharge demands for small and medium-sized wastewater treatment plants. The study demonstrates that physicochemical pretreatment can improve the FO water flux by up to 20%. In contrast, the solute rejection decreases significantly compared to the FO-treated wastewater with mechanical pretreatment.

Influences of mechanical pretreatment on the non-biological treatment of municipal wastewater by forward osmosis

Municipal wastewater treatment involves mechanical, biological and chemical treatment steps for protecting the environment from adverse effects. The biological treatment step consumes the most energy and can create greenhouse gases. This study investigates municipal wastewater treatment without the biological treatment step, including the effects of different pretreatment configurations, for example, direct membrane filtration before forward osmosis. Forward osmosis was tested using raw wastewater and wastewater subjected to different types of mechanical pretreatment, for example, microsieving and microfiltration permeation, as a potential technology for municipal wastewater treatment. Forward osmosis was performed using Aquaporin Inside™ and Hydration Technologies Inc. (HTI) membranes with NaCl as the draw solution. Both types of forward osmosis membranes were tested in parallel for the different types of pretreated feed and evaluated in terms of water flux and solute rejection, that is, biochemical oxygen demand (BOD₇) and total and soluble phosphorus contents. The Aquaporin and HTI membranes achieved a stable water flux with rejection rates of more than 96% for BOD₇ and total and soluble phosphorus, regardless of the type of mechanical pretreated wastewater considered. This result indicates that forward osmosis membranes can tolerate exposure to municipal waste water and that the permeate can fulfil the Swedish discharge limits.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.

Separation of Peptides with Forward Osmosis Biomimetic Membranes

Forward osmosis (FO) membranes have gained interest in several disciplines for the rejection and concentration of various molecules. One application area for FO membranes that is becoming increasingly popular is the use of the membranes to concentrate or dilute high value compound solutions such as pharmaceuticals. It is crucial in such settings to control the transport over the membrane to avoid losses of valuable compounds, but little is known about the rejection and transport mechanisms of larger biomolecules with often flexible conformations. In this study, transport of two chemically similar peptides with molecular weight (M_w) of 375 and 692 Da across a thin film composite Aquaporin Inside™ Membrane (AIM) FO membrane was investigated. Despite the relative large size, both peptides were able to permeate the dense active layer of the AIM membrane and the transport mechanism was determined to be diffusion-based. Interestingly, the membrane permeability increased 3.65 times for the 692 Da peptide (1.39 × 10^-12 m²·s^-1) compared to the 375 Da peptide (0.38 × 10^-12 m²·s^-1). This increase thus occurs for an 85% increase in Mw but only for a 34% increase in peptide radius of gyration (R_g) as determined from molecular dynamics (MD) simulations. This suggests that R_g is a strong influencing factor for membrane permeability. Thus, an increased R_g reflects the larger peptide chains ability to sample a larger conformational space when interacting with the nanostructured active layer increasing the likelihood for permeation.

Efficiently Combining Water Reuse and Desalination through Forward Osmosis-Reverse Osmosis (FO-RO) Hybrids: A Critical Review

Forward osmosis (FO) is a promising membrane technology to combine seawater desalination and water reuse. More specifically, in a FO-reverse osmosis (RO) hybrid process, high quality water recovered from the wastewater stream is used to dilute seawater before RO treatment. As such, lower desalination energy needs and/or water augmentation can be obtained while delivering safe water for direct potable reuse thanks to the double dense membrane barrier protection. Typically, FO-RO hybrid can be a credible alternative to new desalination facilities or to implementation of stand-alone water reuse schemes. However, apart from the societal (public perception of water reuse for potable application) and water management challenges (proximity of wastewater and desalination plants), FO-RO hybrid has to overcome technical limitation such as low FO permeation flux to become economically attractive. Recent developments (i.e., improved FO membranes, use of pressure assisted osmosis, PAO) demonstrated significant improvement in water flux. However, flux improvement is associated with drawbacks, such as increased fouling behaviour, lower rejection of trace organic compounds (TrOCs) in PAO operation, and limitation in FO membrane mechanical resistance, which need to be better considered. To support successful implementation of FO-RO hybrid in the industry, further work is required regarding up-scaling to apprehend full-scale challenges in term of mass transfer limitation, pressure drop, fouling and cleaning strategies on a module scale. In addition, refined economics assessment is expected to integrate fouling and other maintenance costs/savings of the FO/PAO-RO hybrid systems, as well as cost savings from any treatment step avoided in the water recycling.