Green synthesis and characterization of copper nanoparticles by Tinospora cardifolia to produce nature-friendly copper nano-coated fabric and their antimicrobial evaluation

Ecofriendly fabrication of cobalt nanoparticles using Azadirachta indica (neem) for effective inhibition of Candida-like fungal infection in medicated nano-coated textile

This study involves the formulation of cobalt nanoparticles by means of ethanolic Azadirachta indica (neem) extract (CoNP@N). Later, the formulated buildup was incorporated into cotton fabric in order to mitigate antifungal infection. Optimization of the formulation was carried out by considering the effect of plant concentration, temperature, and revolutions per minute (rpm) used, through design of the experiment (DOE), response surface methodology (RSM), and ANOVA of the synthetic procedure. Hence, graph was potted with the aid of effecting parameters and the related factors (size of particle and zeta potential). Further characterization of nanoparticles was performed through scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Attenuated total reflection-Fourier transform infrared (ATR-FTIR) was considered for the detection of functional groups. The structural property of CoNP@N was calculated with the aid of powder X-ray diffraction (PXRD). The surface property was measured with the use of a surface area analyzer (SAA). The values of Inhibition concentration (IC50) and zone of inhibition (ZOI), were calculated, so as to determine the antifungal property against both the strains (Candida albicans, MTCC 227and Aspergillus niger, MTCC 8652). The further nano-coated cloth was subjected to a durability test, and hence the cloth was washed (through the purpose of time 0; 10; 25; and 50 washing cycles), and then its anti-fungal operation to a couple of strains was retained. Primarily, 51 μg/ml of cobalt nanoparticles incorporated on the cloth was retained but after 50 washing cycles in 500 ml of purified water, the cloth showed more efficiency contrary to C. albicans than towards A. niger.

Is the trend toward a sustainable green synthesis of copper oxide nanoparticles completely safe for Oreochromis niloticus when compared to chemical ones?: using oxidative stress, bioaccumulation, and histological biomarkers

Scientists worldwide have noticed that cutting-edge technologies can be used to produce nanoparticles (NPs) in a sustainable and environmentally friendly way, instead of the old methods. However, the effectiveness of this approach for aquatic environments and species still needs to be determined. Therefore, this study aims to compare between the toxicity of green and chemically synthesized copper oxide nanoparticles (GS and CS) CuO NPs at two different concentrations on Nile tilapia (Oreochromis niloticus) using various biomarkers. CuO NPs' formation was proved, and their different characterizations were recorded. Then, the fish samples were randomly allocated in glass aquaria into five groups: one acted as a control group, and the other groups were exposed to two concentrations (25 and 50 mg/L) of GS-CuO NPs and CS-CuO NPs, separately, for 4 days. After the experimental time, in all groups that were exposed to two concentrations of both synthesized CuO NPs, the results revealed that glutathione peroxidase (GPx), catalase (CAT), superoxide dismutase (SOD), and thiobarbituric acid reactive substances (TBARS) levels were elevated in the liver and gills compared to glutathione reduced (GSH) content, which showed a significant decline. Bioaccumulation of Cu was more prevalent in the liver than in the gills, and the highest bioaccumulation capacity was more evident in the groups exposed to CS-CuO NPs. Moreover, the bioaccumulation of Cu caused severe histological changes in the liver and gills. In conclusion, the results suggested that GS-CuO NPs revealed less toxicity than CS-CuO NPs to the examined fish. However, they are still toxic, and their toxic effect cannot be overlooked.

Applications of Green Synthesized Metal Nanoparticles - a Review

Green nanotechnology is an emerging field of science that focuses on the production of nanoparticles by living cells through biological pathways. This topic plays an extremely imperative responsibility in various fields, including pharmaceuticals, nuclear energy, fuel and energy, electronics, and bioengineering. Biological processes by green synthesis tools are more suitable to develop nanoparticles ranging from 1 to 100 nm compared to other related methods, owing to their safety, eco-friendliness, non-toxicity, and cost-effectiveness. In particular, the metal nanoparticles are synthesized by top-down and bottom-up approaches through various techniques like physical, chemical, and biological methods. Their characterization is very vital and the confirmation of nanoparticle traits is done by various instrumentation analyses such as UV-Vis spectrophotometry (UV-Vis), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), atomic force microscopy (AFM), annular dark-field imaging (HAADF), and intracranial pressure (ICP). In this review, we provide especially information on green synthesized metal nanoparticles, which are helpful to improve biomedical and environmental applications. In particular, the methods and conditions of plant-based synthesis, characterization techniques, and applications of green silver, gold, iron, selenium, and copper nanoparticles are overviewed.

Biogenic Synthesis of Copper Nanoparticles: A Systematic Review of Their Features and Main Applications

Nanotechnology is an innovative field of study that has made significant progress due to its potential versatility and wide range of applications, precisely because of the development of metal nanoparticles such as copper. Nanoparticles are bodies composed of a nanometric cluster of atoms (1-100 nm). Biogenic alternatives have replaced their chemical synthesis due to their environmental friendliness, dependability, sustainability, and low energy demand. This ecofriendly option has medical, pharmaceutical, food, and agricultural applications. When compared to their chemical counterparts, using biological agents, such as micro-organisms and plant extracts, as reducing and stabilizing agents has shown viability and acceptance. Therefore, it is a feasible alternative for rapid synthesis and scaling-up processes. Several research articles on the biogenic synthesis of copper nanoparticles have been published over the past decade. Still, none provided an organized, comprehensive overview of their properties and potential applications. Thus, this systematic review aims to assess research articles published over the past decade regarding the antioxidant, antitumor, antimicrobial, dye removal, and catalytic activities of biogenically synthesized copper nanoparticles using the scientific methodology of big data analytics. Plant extract and micro-organisms (bacteria and fungi) are addressed as biological agents. We intend to assist the scientific community in comprehending and locating helpful information for future research or application development.

Current perspectives of metal-based nanomaterials as photocatalytic antimicrobial agents and their therapeutic modes of action: A review

Efforts to restrict the emergence and progression of multidrug-resistant bacterial strains should heavily involve the scientific community, including government bodies, researchers, and industries, in developing new and effective photocatalytic antimicrobial agents. Such changes warrant the modernization and upscaling of materials synthesis laboratories to support and expedite the mass production of materials at the industrial scale for the benefit of humankind and the environment. Despite the massive volume of publications reporting the potential usage of different types of metal-based nanomaterials as antimicrobial agents, reviews uncovering the similarities and differences among the various products remain lacking. This review details the basic and unique properties of metal-based nanoparticles, their use as photocatalytic antimicrobial agents, and their therapeutic modes of action. It shall be noted that compared to traditional antibiotics, the mode of action of photocatalytic metal-based nanomaterials for killing microorganisms are completely different, despite displaying promising performance against antibiotic-resistant bacteria. Besides, this review uncovers the differences in the mode of actions of metal oxide nanoparticles against different types of bacteria, as well as towards viruses. Last but not least, this review comprehensively describes previous published clinical trials and medical usages involving contemporary photocatalytic antimicrobial agents.

Datura metel L. leaf extract mediated sodium alginate polymer membrane for supercapacitor and food packaging applications

Datura metel L. leaf extract mediated sodium alginate polymer membrane was successfully made using the solution casting technique. Electric, electrochemical, physicochemical and antimicrobial analyses of the prepared film were investigated. Functional groups of polysaccharides are identified in FTIR analysis and crystallinity/amorphous of the prepared samples was studied using XRD analysis. The prepared polymer membrane (DmMSA2) exhibits the ionic conductivity of 2.18 × 10^-4 Scm^-1, maximum specific capacitance of 131 F/g at a current density of 0.2 A/g and also exhibits a significant effect of antimicrobial activity against human pathogens. Hence, Datura metel L. leaf extract mediated polymer membranes are promising candidates for solid-electrolyte in supercapacitor devices and antimicrobial agents in food packaging applications.

Mechanistic insights of Euphorbia milii des moul mediated biocompatible and non-cytotoxic, antimicrobial nanoparticles: an answer to multidrug resistant bacteria

The emergence of drug-resistant microbial pathogens is a matter of global concern and become more serious if they linked with healthcare-associated infections (HAIs). As per World Health Organization statistics, multidrug-resistant (MDR) bacterial pathogens account for between 7 and 12% of the worldwide burden of HAIs. The need for an effective and environmentally sustainable response to this situation is urgent. The primary goal of this study was to create copper nanoparticles that are biocompatible and non-toxic by using an extract of Euphorbia des moul, and then to test these nanoparticles' bactericidal efficacy against MDR strains of Escherichia coli, Klebsiella spp., Pseudomonas aeruginosa, and Acinetobacter baumannii. UV-Vis spectroscopy, dynamic light scattering, X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and scanning electron microscopy techniques were used to characterize the biogenic G-CuNPs. It was found that G-CuNPs were spherical in shape, with an average diameter of ~ 40 nm and a charge density of - 21.52 mV. The G-CuNPs fully eradicated the MDR strains at a dosage of 2 mg/ml with 3 h of incubation time. Mechanistic analysis showed that the G-CuNPs efficiently disrupted the cell membrane and damaged the DNA and by generating more reactive oxygen species. Moreover, cytotoxic examination revealed that G-CuNPs displayed < 5% toxicity at 2 mg/ml concentration on human RBCs, PBMCs, and A549 cell lines, suggesting that they are biocompatible. This nano-bioagent is an eco-friendly, non-cytotoxic, non-hemolytic organometallic copper nanoparticles (G-CuNPs) with a high therapeutic index for possible use in the prevention of biomedical device-borne infections by preparing an antibacterial layer on indwelling medical devices. However, its potential clinical use has to be further studied through in vivo testing with an animal model.

Green synthesis and antimicrobial mechanism of nanoparticles: applications in agricultural and agrifood safety

The growing demand for food and its safety are a challenge for agriculture and agrifood. This has led to the incorporation of alternatives such as organic agriculture, the use of biocontrollers, the development of transgenic plants resistant to pathogens and the incorporation of nanotechnology. In this sense, agrochemicals based on nanoparticles (NPs) have been developed. Recently, the green synthesis of NPs has grown rapidly and, for this reason, molecules, microorganisms, fungi and plants are used. Synthesis from plant extracts offers a broad spectrum and, despite the fact that NPs are usually dispersed in size and shape, extensive antimicrobial effectiveness has been demonstrated at nanomolar concentrations. It has been shown that the mechanism of action can be through the dissipation of the driving force of the protons, the alteration of cellular permeability, the formation of bonds with the thiol group of the proteins, the generation of reactive species of oxygen, and the hyperoxidation of DNA, RNA and even the cell membrane. To improve the efficiency of NPs, modifications have been made such as coating with other metals, the addition of antibiotics, detergents and surfactants, as well as the acidification of the solution. Consequently, NPs are considered as a promising method for achieving safety in the agricultural and agrifood area. However, it is necessary to investigate the side effects of NPs, when applied in agroecological systems, on the textural, nutriment and sensory properties of food, as well as the impact on human health. © 2022 Society of Chemical Industry.

Functionalization of ampicillin and gentamicin with biogenic copper nanoparticles (CuNPs) remodel antimicrobial and cytotoxic outcome against MDR clinical isolates

The present study reports the functionalization of antibiotic-conjugated Alternanthera pungens and Trichodesma indicum copper nanoparticles (CuNPs). Initially, antibiotic profiling of multi-drug resistant (MDR) clinical isolates against five antibiotics was verified and then gentamicin and ampicillin conjugates of CuNPs were prepared. Biosynthesized nanostructures were characterized through UV-visible spectroscopy, Fourier-transformed infrared spectroscopy, X-ray diffraction and scanning electron microscope. Biogenic synthesized CuNPs displayed highest antibacterial activity (24.0-31.3 mm inhibition zones) when capped with gentamicin as compared to the ampicillin-conjugated NPs which showed resistance against most of the bacterial species. A. pungens-derived conjugates of gentamicin (CuAp-GNT) along with the vehicle revealed 4.86 ± 0.20% and 4.25 ± 2.96% hemolytic potential and highest MDA production in S. typhimurium (3.18 ± 1.52 µg/mL and 6.31 ± 3.49 µg/mL) and K. pneumoniae (2.99 ± 0.90 µg/mL and 4.06 ± 1.20 µg/mL). Similarly, CuAp-GNT also showed highest DNA protection ability by displaying 1342.99 ± 11.87 band intensity. All-inclusive, CuAp showed more promising effects when conjugated with gentamicin indicating that capping of gentamicin with the active components of the plant-based copper nanostructures increases the antibacterial capacity of the drug. Hence, conjugation of antibiotics with bio-based sources offers great potential for identifying potent drug leads.

Tutorial review on the processing and performance of fabrics with antipathogenic inorganic agents

Functionalized textiles have been increasingly used for enhancing antimicrobial or antiviral (antipathogenic) action. Those pathogens can cause recurring diseases by direct or indirect transmission. Particularly, airborne microorganisms may cause respiratory diseases or skin infections like allergies and acne and the use of inorganic agents such as metal and metal oxides has proven effective in antipathogen applications. This review is a tutorial on how to obtain functional fabric with processes easily applied for industrial scale. Also, this paper summarizes relevant textiles and respective incorporated inorganic agents, including their antipathogenic mechanism of action. In addition, the processing methods and functional finishing, on a laboratory and industrial scale, to obtain a functional textile are shown. Characterization techniques, including antipathogenic activity and durability, mechanical properties, safety, and environmental issues, are presented. Challenges and perspectives on the broader use of antipathogenic fabrics are discussed.

Targeting Apoptotic Pathway of Cancer Cells with Phytochemicals and Plant-Based Nanomaterials

Apoptosis is the elimination of functionally non-essential, neoplastic, and infected cells via the mitochondrial pathway or death receptor pathway. The process of apoptosis is highly regulated through membrane channels and apoptogenic proteins. Apoptosis maintains cellular balance within the human body through cell cycle progression. Loss of apoptosis control prolongs cancer cell survival and allows the accumulation of mutations that can promote angiogenesis, promote cell proliferation, disrupt differentiation, and increase invasiveness during tumor progression. The apoptotic pathway has been extensively studied as a potential drug target in cancer treatment. However, the off-target activities of drugs and negative implications have been a matter of concern over the years. Phytochemicals (PCs) have been studied for their efficacy in various cancer cell lines individually and synergistically. The development of nanoparticles (NPs) through green synthesis has added a new dimension to the advancement of plant-based nanomaterials for effective cancer treatment. This review provides a detailed insight into the fundamental molecular pathways of programmed cell death and highlights the role of PCs along with the existing drugs and plant-based NPs in treating cancer by targeting its programmed cell death (PCD) network.

Fabricating Antibacterial Polyethylene Terephthalate Substrates Through an Industrial Approach by Applying Emulsions of Copper-Based Nanoparticles

In this research, various emulsions of copper-based nanoparticles were synthesized through the chemical reduction method followed by utilizing the pad–dry–cure technique as an industrial approach to manufacturing bactericidal polyethylene terephthalate (PET) substrates. Copper sulfate/copper acetate, sodium hypophosphite (SHP)/ascorbic acid, and cetyltrimethylammonium bromide were employed as salts, reducing agents, and stabilizers, respectively. Also, a spin finish oil was used for forming an emulsion. The effects of type and amount of copper salt and reductant as well as the use of resin and stabilizer were investigated concerning antibacterial activities, weight, and color changes of coated samples to find optimum formulation. Field-emission scanning electron microscope (FESEM) images, mapping/energy-dispersive spectroscopy (EDX), X-ray diffraction (XRD) pattern, Raman spectroscopy, and UV–visible spectrophotometer was proved successful in synthesis and loading of copper-based emulsions on the PET substrates. The results revealed that change of copper salt, substituting SHP with ascorbic acid, the addition of resin, and the use of surfactant yielded negligible effect, enhancing impact, reducing the influence, and improving efficacy on bactericidal characteristics of the treated samples, respectively. Based on findings, the samples coated by emulsion containing only copper sulfate/SHP and emulsion including only copper acetate were considered optimum samples indicating 100% bactericidal properties against both S. aureus and E. coli pathogenic bacteria. Despite showing bactericidal activities, it was further found that the treated samples exhibited cell toxicity toward human skin cells implying their applications in indirect contact usages. Coated samples further indicated a good washing fastness even after 20 washing cycles. This route can be considered as a facile industrially applicable method for imparting bactericidal properties to polymeric substrates. Furthermore, such emulsions can potentially be consumed as an antibacterial spin finish oil in melt-spinning to develop antibacterial textiles.

Intrafibrillar Dispersion of Cuprous Oxide (Cu2O) Nanoflowers within Cotton Cellulose Fabrics for Permanent Antibacterial, Antifungal and Antiviral Activity

With increasingly frequent highly infectious global pandemics, the textile industry has responded by developing commercial fabric products by incorporating antibacterial metal oxide nanoparticles, particularly copper oxide in cleaning products and personal care items including antimicrobial wipes, hospital gowns and masks. Current methods use a surface adsorption method to functionalize nanomaterials to fibers. However, this results in poor durability and decreased antimicrobial activity after consecutive launderings. In this study, cuprous oxide nanoparticles with nanoflower morphology (Cu₂O nanoflowers) are synthesized in situ within the cotton fiber under mild conditions and without added chemical reducing agents from a copper (II) precursor with an average maximal Feret diameter of 72.0 ± 51.8 nm and concentration of 17,489 ± 15 mg/kg. Analysis of the Cu₂O NF-infused cotton fiber cross-section by transmission electron microscopy (TEM) confirmed the internal formation, and X-ray photoelectron spectroscopy (XPS) confirmed the copper (I) reduced oxidation state. An exponential correlation (R² = 0.9979) between the UV-vis surface plasmon resonance (SPR) intensity at 320 nm of the Cu₂O NFs and the concentration of copper in cotton was determined. The laundering durability of the Cu₂O NF-cotton fabric was investigated, and the superior nanoparticle-leach resistance was observed, with the fabrics releasing only 19% of copper after 50 home laundering cycles. The internally immobilized Cu₂O NFs within the cotton fiber exhibited continuing antibacterial activity (≥99.995%) against K. pneumoniae, E. coli and S. aureus), complete antifungal activity (100%) against A. niger and antiviral activity (≥90%) against Human coronavirus, strain 229E, even after 50 laundering cycles.

Eco-friendly, green synthesized copper oxide nanoparticle (CuNPs) from an important medicinal plant Turnera subulata Sm. and its biological evaluation

In this report, the green fabrication of copper oxide nanoparticles (CuNPs) using Turnera subulata leaf extract and assessed for the antibacterial and photocatalytic activities. The synthesis of CuNPs was performed using the leaves of T. subulata (TS-CuNPs) and characterized using UV-visible spectrophotometry, Fourier transforms infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), and Energy-dispersive X-ray spectroscopy (EDX). Produced TS-CuNPs showing transmittance peaks approximately 707-878 cm^-1, with a spherical shape particle with an average size of 58.5 nm. As synthesized TS-CuNPs were used as a coating material in cotton fabrics and tested the efficacy against Gram-negative and Gram-positive bacterial pathogens. TS-CuNPs inhibited the growth of Escherichia coli and Staphylococcus aureus on cotton fabrics. Antibiofilm activity of TS-CuNPs showed a 4-fold reduction in the biofilm formation of E. coli and S. aureus. Structural morphology of TS-CuNPs coated on cotton fabric analysis using SEM-EDX confirmed the attachment of TS-CuNPs and reduction in the bacterial attachment to the cotton fabrics. Thus, this study provides a potential strategy to improve the antibacterial property of cotton fabrics in textile production for medical, sportswear, and casual wear applications. Further, the photocatalytic activity against the tested dyes evident the potential in dye industry wastewater treatment. Hence, this work represents a simple, greener, and cost-effective route for in situ synthesis of CuNPs with the potential antibacterial and as a dye degradation agent for water remediation.

Adsorption of Safranin-O dye by copper oxide nanoparticles synthesized from Punica granatum leaf extract

The development of new technologies for water and wastewater treatment is a growing need due to the occurrence of micropollutants, such as dyes, in water resources. In this sense, green-synthesized nanoparticles are being extensively studied, due to their low cost, non-toxicity, and high efficiency in adsorption processes. Thus, the present study reports the green synthesis of copper oxide nanoparticles (CuO-NP), obtained from pomegranate (Punica granatum) leaf extract, employed for the removal of Safranin-O (SO) dye. CuO-NP was characterized by physicochemical analysis. These analyzes suggested that the redox process occurred efficiently. Also, the material presented interesting elements for the removal of cationic dyes such as negative surface charge, high specific surface area, and predominance of mesopores. The kinetic data fitted the pseudo-second-order model, reaching equilibrium in 480 min. The equilibrium study resulted in a maximum adsorption capacity of 189.54 mg g^-1 at 298 K and the experimental data best fitted the Langmuir model. The effect of pH and ionic strength did not present significant changes, which demonstrates an advantage of this adsorbent over other materials. The regeneration study allowed to verify the possibility of reuse CuO-NP, since after 4 cycles the adsorption capacity was 44% of the initial value. Considering the results found, CuO-NP has a high potential for applicability in the treatment of water contaminated by dyes.

Plant Extract-Based Synthesis of Metallic Nanomaterials, Their Applications, and Safety Concerns

Nanotechnology has attracted the attention of researchers from different scientific fields because of the escalated properties of nanomaterials compared with the properties of macromolecules. Nanomaterials can be prepared through different approaches involving physical and chemical methods. The development of nanomaterials through plant-based green chemistry approaches is more advantageous than other methods from the perspectives of environmental safety, animal, and human health. The biomolecules and metabolites of plants act as reducing and capping agents for the synthesis of metallic green nanomaterials. Plant-based synthesis is a preferred approach as it is not only cost-effective, easy, safe, clean, and eco-friendly but also provides pure nanomaterials in high yield. Since nanomaterials have antimicrobial and antioxidant potential, green nanomaterials synthesized from plants can be used for a variety of biomedical and environmental remediation applications. Past studies have focused mainly on the overall biogenic synthesis of individual or combinations of metallic nanomaterials and their oxides from different biological sources, including microorganisms and biomolecules. Moreover, from the viewpoint of biomedical applications, the literature is mainly focusing on synthetic nanomaterials. Herein, we discuss the extraction of green molecules and recent developments in the synthesis of different plant-based metallic nanomaterials, including silver, gold, platinum, palladium, copper, zinc, iron, and carbon. Apart from the biomedical applications of metallic nanomaterials, including antimicrobial, anticancer, diagnostic, drug delivery, tissue engineering, and regenerative medicine applications, their environmental remediation potential is also discussed. Furthermore, safety concerns and safety regulations pertaining to green nanomaterials are also discussed. This article is protected by copyright. All rights reserved.

A Critical Review of the Antimicrobial and Antibiofilm Activities of Green-Synthesized Plant-Based Metallic Nanoparticles

Metallic nanoparticles (MNPs) produced by green synthesis using plant extracts have attracted huge interest in the scientific community due to their excellent antibacterial, antifungal and antibiofilm activities. To evaluate these pharmacological properties, several methods or protocols have been successfully developed and implemented. Although these protocols were mostly inspired by the guidelines from national and international regulatory bodies, they suffer from a glaring absence of standardization of the experimental conditions. This situation leads to a lack of reproducibility and comparability of data from different study settings. To minimize these problems, guidelines for the antimicrobial and antibiofilm evaluation of MNPs should be developed by specialists in the field. Being aware of the immensity of the workload and the efforts required to achieve this, we set out to undertake a meticulous literature review of different experimental protocols and laboratory conditions used for the antimicrobial and antibiofilm evaluation of MNPs that could be used as a basis for future guidelines. This review also brings together all the discrepancies resulting from the different experimental designs and emphasizes their impact on the biological activities as well as their interpretation. Finally, the paper proposes a general overview that requires extensive experimental investigations to set the stage for the future development of effective antimicrobial MNPs using green synthesis.

Improvement of Plant Responses by Nanobiofertilizer: A Step towards Sustainable Agriculture

Drastic changes in the climate and ecosystem due to natural or anthropogenic activities have severely affected crop production globally. This concern has raised the need to develop environmentally friendly and cost-effective strategies, particularly for keeping pace with the demands of the growing population. The use of nanobiofertilizers in agriculture opens a new chapter in the sustainable production of crops. The application of nanoparticles improves the growth and stress tolerance in plants. Inoculation of biofertilizers is another strategy explored in agriculture. The combination of nanoparticles and biofertilizers produces nanobiofertilizers, which are cost-effective and more potent and eco-friendly than nanoparticles or biofertilizers alone. Nanobiofertilizers consist of biofertilizers encapsulated in nanoparticles. Biofertilizers are the preparations of plant-based carriers having beneficial microbial cells, while nanoparticles are microscopic (1-100 nm) particles that possess numerous advantages. Silicon, zinc, copper, iron, and silver are the commonly used nanoparticles for the formulation of nanobiofertilizer. The green synthesis of these nanoparticles enhances their performance and characteristics. The use of nanobiofertilizers is more effective than other traditional strategies. They also perform their role better than the common salts previously used in agriculture to enhance the production of crops. Nanobiofertilizer gives better and more long-lasting results as compared to traditional chemical fertilizers. It improves the structure and function of soil and the morphological, physiological, biochemical, and yield attributes of plants. The formation and application of nanobiofertilizer is a practical step toward smart fertilizer that enhances growth and augments the yield of crops. The literature on the formulation and application of nanobiofertilizer at the field level is scarce. This product requires attention, as it can reduce the use of chemical fertilizer and make the soil and crops healthy. This review highlights the formulation and application of nanobiofertilizer on various plant species and explains how nanobiofertilizer improves the growth and development of plants. It covers the role and status of nanobiofertilizer in agriculture. The limitations of and future strategies for formulating effective nanobiofertilizer are mentioned.

Phyto-Mediated Copper Oxide Nanoparticles for Antibacterial, Antioxidant and Photocatalytic Performances

The greatest challenge of the current generation and generations to come is antimicrobial resistance, as different pathogenic bacteria have continuously evolved to become resistant to even the most recently synthesized antibiotics such as carbapenems. Resistance to carbapenems limits the therapeutic options of MDR infections as they are the only safe and effective drugs recommended to treat such infections. This scenario has complicated treatment outcomes, even to the commonest bacterial infections. Repeated attempts to develop other approaches have been made. The most promising novel therapeutic option is the use of nanomaterials as antimicrobial agents. Thus, this study examined the efficacy of Camellia sinensis extract (CSE) and Prunus africana bark extract (PAE) green synthesized Copper oxide nanoparticles (CuONPs) against carbapenem-resistant bacteria. Furthermore, the photocatalytic and antioxidant activities of CuONPs were evaluated to determine the potential of using them in a wide range of applications. CuONPs were biosynthesized by CSE and PAE. UV vis spectroscopy, X-ray Diffraction (XRD), Dynamic light scattering (DLS), Fourier Transform Infrared spectroscopy (FTIR), and Scanning Electron Microscopy (SEM) were used to characterize the nanoparticles. CuONPs susceptibility tests were carried out by the agar well diffusion method. The photocatalytic and antioxidant activities of the CuONPs were determined by the methylene blue and DPPH free radical scavenging assays, respectively. UV vis absorbance spectra registered surface plasmon resonance peaks between 272 and 286 nm, confirming the presence of CuONPs. The XRD array had nine strong peaks at 2θ values typical of CuONPs. FTIR spectra exhibited bands associated with organic functional groups confirming capping and functionalization of the CuONPs by the phytochemicals. DLS analysis registered a net zeta potential of +12.5 mV. SEM analysis revealed that the nanoparticles were spherical and clustered with a mean diameter of 6 nm. Phytosynthesized CuONPs exhibited the highest growth suppression zones of 30 mm with MIC ranging from 30 to 125 μg/ml against MDR bacteria. Furthermore, the CuONPs achieved a methylene blue dye photocatalysis degradation efficiency of 85.5% and a free radical scavenging activity of 28.8%. PAE and CSE successfully bio-reduced copper ions to the nanoscale level with potent antimicrobial, photocatalysis, and antioxidant activities.

Mechanism of copper nanoparticle toxicity in rainbow trout olfactory mucosa

Chemosensory perception is crucial for fish reproduction and survival. Direct contact of olfactory neuroepithelium to the surrounding environment makes it vulnerable to contaminants in aquatic ecosystems. Copper nanoparticles (CuNPs), which are increasingly used in commercial and domestic applications due their exceptional properties, can impair fish olfactory function. However, the molecular events underlying olfactory toxicity of CuNPs are largely unexplored. Our results suggested that CuNPs were bioavailable to olfactory mucosal cells. Using RNA-seq, we compared the effect of CuNPs and copper ions (Cu²⁺) on gene transcript profiles of rainbow trout (Oncorhynchus mykiss) olfactory mucosa. The narrow overlap in differential gene expression between the CuNP- and Cu²⁺-exposed fish revealed that these two contaminants exert their effects through distinct mechanisms. We propose a transcript-based conceptual model that shows that olfactory signal transduction, calcium homeostasis, and synaptic vesicular signaling were affected by CuNPs in the olfactory sensory neurons (OSNs). Neuroregenerative pathways were also impaired by CuNPs. In contrast, Cu²⁺ did not induce toxicity pathways and rather upregulated regeneration pathways. Both Cu treatments reduced immune system pathway transcripts. However, suppression of transcripts that were associated with inflammatory signaling was only observed with CuNPs. Neither oxidative stress nor apoptosis were triggered by Cu²⁺ or CuNPs in mucosal cells. Dysregulation of transcripts that regulate function, maintenance, and reestablishment of damaged olfactory mucosa represents critical mechanisms of toxicity of CuNPs. The loss of olfaction by CuNPs may impact survival of rainbow trout and impose an ecological risk to fish populations in contaminated environments.

Recent Advancements in Green Synthesis of Nanoparticles for improvement of bioactivities: a Review

Natural products have widely been used in applications ranging from antibacterial, antiviral, antifungal and various other medicinal applications. Use of these natural products was recognized way before the establishment of basic chemistry behind the disease and the chemistry of plant metabolites. After the establishment of plant chemistry various new horizons evolved, and application of the natural products breached the orthodox limitations. In one such interdisciplinary area, use of plant materials in the synthesis of nano particles (NPs) has exponentially emerged. This advancement has offered various environment friendly methods where hazardous chemicals are completely replaced by natural products in the sophisticated and hectic synthesis processes. This review is an attempt to understand the mechanism of metal nano particles synthesis using plant materials. It includes details on the role of plant's secondary metabolites in the synthesis of nano particles including the mechanism of action. In addition, use of these nano materials has widely been discussed along with the possible mechanism behind their antimicrobial and catalytic action.

Green Synthesis of Copper Nanoparticles Using Cotton

Copper nanoparticles (CuNP) were obtained by a green synthesis method using cotton textile fibers and water as solvent, avoiding the use of toxic reducing agents. The new synthesis method is environmentally friendly, inexpensive, and can be implemented on a larger scale. This method showed the cellulose capacity as a reducing and stabilizing agent for synthetizing Cellulose–Copper nanoparticles (CCuNP). Nanocomposites based on CCuNP were characterized by XRD, TGA, FTIR and DSC. Functional groups present in the CCuNP were identified by FTIR analysis, and XRD patterns disclosed that nanoparticles correspond to pure metallic Cu°, and their sizes are at a range of 13–35 nm. Results demonstrated that CuNPs produced by the new method were homogeneously distributed on the entire surface of the textile fiber, obtaining CCuNP nanocomposites with different copper wt%. Thus, CuNPs obtained by this method are very stable to oxidation and can be stored for months. Characterization studies disclose that the cellulose crystallinity index (CI) is modified in relation to the reaction conditions, and its chemical structure is destroyed when nanocomposites with high copper contents are synthesized. The formation of CuO nanoparticles was confirmed as a by-product, through UV spectroscopy, in the absorbance range of 300–350 nm.

Analysis of Antimicrobial Properties of PVA-Based Coatings with Silver and Zinc Oxide Nanoparticles

Abstract

Public places such as swimming pools, saunas and jacuzzis are at high risk of developing microorganisms and are a potential source of disease. Above all, increased temperature and humidity favour this. A relatively new but effective way to combat microorganisms is to subject them to metal or metal oxide nanoparticles. The paper presents a method of obtaining nanocompositions for direct application at the place of occurrence of the microorganisms. The advantage of nanocompositions is that they can easily be removed from the infected surface in the form of a film containing dead organic matter. The article investigates the biocidal properties against common microorganisms such as Aspergillus niger and Candida albicans of nanocompositions containing silver nanoparticles and nanometric zinc oxide. The physicochemical properties of the nanocompositions were characterised and the antifungal properties of the preparations obtained determined using the suspension method. The results showed that the PVA-based compositions obtained were able effectively to inhibit the growth of the tested strains. Elongation of contact time between microorganism and nanoparticles which was changed from 5 to 60 min resulted in higher antimicrobial activity. It was manifested in reduced growth area. The same observation was made when the concentration of used nanoparticles was increased. When the concentration of nanosilver raised from 12.5 up to 200 ppm, the development of Aspergillus niger was slower. Increasing of zinc oxide nanoparticles concentration resulted in growth inhibition of Candida albicans strain.

Graphic Abstract

The "Maskne" microbiome - pathophysiology and therapeutics

"Maskne" is a new term coined during the 2020 COVID-19 pandemic. It refers to a subset of acne mechanica, deserving consideration in view of widespread reusable fabric mask-wearing to control the pandemic worldwide. Understanding of underlying pathophysiology directly relates to the novel skin microenvironment and textile-skin friction created by mask-wearing, distinct from nontextile-related acne mechanica previously linked to wearing of headgear. Specifically, the occlusive microenvironment leads to microbiome dysbiosis, which is linked to various dermatological conditions. Additional textile-skin interactions include factors such as breathability, stickiness sensations, moisture saturation, and hygiene maintenance. Increased skin temperatures can trigger sweat/heat-related dermatoses, and ear loops potentially trigger pressure-induced dermatoses. Important therapeutic considerations include increased skin irritation potential of conventional acne treatments under occlusion, exacerbation of chronic dermatoses, that is, perioral dermatitis, rosacea, and eczema, and susceptibility of these same patient groups to heightened discomfort with mask-wearing. Cotton, as the traditional fabric of choice for dermatology patients, has limited benefits in the context of face masks - increased subjective discomfort relates to increased moisture saturation and stickiness, inevitable because of high biofluid load of the nasal and oral orifices. Prolonged textile-skin contact time, directly proportional to the risk of maskne, can be an opportunity for the application of biofunctional textiles.

Clitoria ternatea Mediated Synthesis of Graphene Quantum Dots for the Treatment of Alzheimer's Disease

The main purpose of the present study was to synthesize graphene quantum dots (GQDs)from the flowers of Clitoria ternatea with the help of one-pot microwave-assisted green synthesis for the treatment of Alzheimer's disease. Further, the synthesized graphene quantum dots show a particle size of 10 nm ±1.3, a PDI of 0.354 ± 1.8, and a ζ potential of -46 ± 0.4, indicating the good stability of the quantum dots. With the help of scanning electron microscopy (SEM) and transfer electron microscopy (TEM) examination, the surface microscopic behavior of the synthesized quantum dots was determined. The presence of functional groups in the quantum dots was determined by Fourier-transform infrared spectroscopy (FTIR) study, the chemical state information on the sample was determined with the help of X-ray photoelectron spectroscopy (XPS), and the surface area of the dots was determined with the help of a surface area analyzer. With the help of a radial arm maze and water morris maze assay, the learning and memory capacity of the quantum dots was assessed, and the results show that the ctGQDs significantly decreased the transfer latency to reach the baited arm in 10.37 ± 1.65 s or to the hidden platform in 18.42 ± 0.99 s in 7 days. The synthesized quantum dots show more inhibition of the acetyl cholinesterase enzyme, i.e., 86.32 ± 1.52%, as compared to that of pure donepezil, i.e., 72.46 ± 2.21%. ctGQDs considerably increased the level of glutathione and protein and decreased the level of lipid peroxide and nitric oxide. The histopathological image of ctGQDs shows more preservation of small pyramidal cell and treats the disorganization of the cells. These results suggest that the quantum dots significantly crossed the blood-brain barrier since they were small in size and were effective in reducing Alzheimer-like symptoms in rodents, and thus, it can be concluded that Clitoria ternatea flowers can be used as an adjuvant in the treatment of Alzheimer's.

Biosynthesis, Characterization, and Wound-Healing Activity of Phenytoin-Loaded Copper Nanoparticles

Wound-healing is a very complex and evolutionary process that involves a great variety of dynamic steps. Although different pharmaceutical agents have been developed to hasten the wound-healing process, the existing agents are still far from optimal. The present work aimed to prepare and evaluate the wound-healing efficacy of phenytoin-loaded copper nanoparticles (PHT-loaded CuNPs). CuNPs were biosynthesized using licorice aqueous extract. The prepared CuNPs were loaded with PHT by adsorption, characterized, and evaluated for wound-healing efficiency. Results showed that both plain and PHT-loaded CuNPs were monodisperse and exhibited a cubic and hexagonal morphology. The mechanism by which PHT was adsorbed on the surface of CuNPs was best fit by the Langmuir model with a maximum loaded monolayer capacity of 181 mg/g. The kinetic study revealed that the adsorption reaction followed the pseudo-second order while the thermodynamic parameters indicated that the adsorption process was physical in nature and endothermic, and occurred spontaneously. Moreover, the in vivo wound-healing activity of PHT-loaded CuNP impregnated hydroxypropylmethyl cellulose (HPMC) gel was carried out using an excisional wound model in rats. Data showed that PHT-loaded CuNPs accelerated epidermal regeneration and stimulated granulation and tissue formation in treated rats compared to controls. Additionally, quantitative real-time polymerase chain reaction (RT-PCR) analysis showed that lesions treated with PHT-loaded CuNPs were associated with a marked increase in the expression of dermal procollagen type I and a decrease in the expression of the inflammatory JAK3 compared to control samples. In conclusion, PHT-loaded CuNPs are a promising platform for effective and rapid wound-healing.

Novel Biosynthesis of Copper Nanoparticles Using Zingiber and Allium sp. with Synergic Effect of Doxycycline for Anticancer and Bactericidal Activity

Copper nanoparticles (CuNPs), due to their cost-effective synthesis, interesting properties, and a wide range of applications in conductive inks, cooling fluids, biomedical field, and catalysis, have attracted the attention of scientific community in recent years. The aim of the present study was to develop and characterize antibacterial and anticancer CuNPs synthesized via chemical and biological methods, and further synthesize CuNPs conjugated with doxycycline to study their synergic effect. During the chemical synthesis, ascorbic acid was used as a stabilizing agent, while Zingiber officinale and Allium sativum-derived extracts were used during the biological methods for synthesis of CuNPs. Characterization of CuNPs was performed by transmission electron microscopy (TEM), UV-visible spectroscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray crystallography (XRD). Antimicrobial evaluation of the nanomaterials against Pseudomonas aeruginosa and Escherichia coli was performed by using disk diffusion method, while anticancer behavior against HeLa and HepG2 cell lines was studied by MTT assay. TEM revealed spherical-shaped nanoparticles with mean size of 22.70 ± 5.67, 35.01 ± 5.84, and 19.02 ± 2.41 nm for CuNPs, Gin-CuNPs, and Gar-CuNPs, respectively, and surface plasmon resonance peaks were obtained at 570 nm, 575 nm, and 610 nm for CuNPs, Gar-CuNPs, and Gin-CuNPs, respectively. The results of FTIR confirmed the consumption of biomolecules from the plant extracts for the synthesis of CuNPs. XRD analysis also confirmed synthesis of CuNPs. Doxycycline-conjugated NPs exhibited more antibacterial effects than doxycycline or CuNPs alone. Copper nanoparticles prepared by biological synthesis are cost-effective and eco-friendly as compared to their chemical counterparts. The chemically synthesized nanoparticles displayed more significant antimicrobial activity when capped with doxycycline than Z. officinale and A. sativum-mediated CuNPs; however, green-synthesized nanoparticles showed greater anticancer activity than their chemical counterparts.

Biosynthesis of Copper Oxide Nanoparticles with Potential Biomedical Applications

Introduction

In recent years, the use of cost-effective, multifunctional, environmentally friendly and simple prepared nanomaterials/nanoparticles have been emerged considerably. In this manner, different synthesizing methods were reported and optimized, but there is still lack of a comprehensive method with multifunctional properties.

Materials and Methods

In this study, we aim to synthesis the copper oxide nanoparticles using Achillea millefolium leaf extracts for the first time. Catalytic activity was investigated by in situ azide alkyne cycloaddition click and also A³ coupling reaction, and optimized in terms of temperature, solvent, and time of the reaction. Furthermore, the photocatalytic activity of the synthesized nanoparticles was screened in terms of degradation methylene blue dye. Biological activity of the synthesized nanoparticles was evaluated in terms of antibacterial and anti-fungal assessments against Staphylococcus aureus, M. tuberculosis, E. coli, K. pneumoniae, P. mirabili, C. diphtheriae and S. pyogenes bacteria's and G. albicans, A. flavus, M. canis and G. glabrata fungus. In the next step, the biosynthesized CuO-NPs were screened by MTT and NTU assays.

Results

Based on our knowledge, this is a comprehensive study on the catalytic and biological activity of copper oxide nanoparticles synthesizing from Achillea millefolium, which presents great and significant results (in both catalytic and biological activities) based on a simple and green procedure.

Conclusion

Comprehensive biomedical and catalytic investigation of the biosynthesized CuO-NPs showed the mentioned method leads to synthesis of more eco-friendly nanoparticles. The in vitro studies showed promising and considerable results, and due to the great stability of these nanoparticles in a green media, effective biological activity considered as an advantageous.

Self-assembled drug loaded glycosyl-protein metal nanoconstruct: Detailed synthetic procedure and therapeutic effect in solid tumor treatment

Nanotechnology-based drug delivery research has largely focused on developing well efficient localized delivery therapeutic agents to overcome the limitations of non-specificity and toxicity of conventional chemotherapy. Herein, we constructed a nanoplatform based on a self-assembled polysaccharide-protein conjugate to deliver anti-tumor drug doxorubicin and gold nanoparticles (DOX@PST-BSA AuNPs) for cancer therapy. The self-assembled DOX@PST-BSA AuNPs exhibited higher stability and thermal properties which enable them for drug delivery via passive targeting. The fluorescent property of the drug contributes to the self-monitoring of NPs Biodistribution in vitro and in vivo. Furthermore, the NPs showed negligible cytotoxicity and tissue accumulation in normal cells in vivo. Importantly, the NPs could load the anti-tumor drug with high encapsulation efficiency and competently delivered into the tumor microenvironment thereby inhibit tumor growth significantly through apoptotic induction. Notably, DOX@PST-BSA AuNPs exhibits low systemic toxicity and very few side effects in vivo. Based on the explored features, these NPs could serve as a promising multifunctional drug delivery nanoplatform for cancer therapy.