The enantioselectivity of Candida rugosa lipase is influenced by the particle size of the immobilising support material Accurel

Study on the synthesis of pine sterol esters in solvent-free systems catalyzed by Candida rugosa lipase immobilized on hydrophobic macroporous resin

BACKGROUND

Pine sterol ester is a type of novel food source nutrient with great advantages in lowering blood cholesterol levels, inhibiting tumors, preventing prostate enlargement, and regulating immunity. Macroporous resins with large specific surface area, stable structures, and various functional groups (epoxy, amino, and octadecyl groups) have been selected for immobilization of Candida rugosa lipase (CRL) to improve its stability and efficiency in the synthesis of pine sterol esters. A solvent-free strategy using oleic acid (substrate) as an esterification reaction medium is an important alternative for avoiding the use of organic solvents.

RESULTS

The immobilization conditions of CRL immobilized on several types of commercial macroporous resins were optimized. Fortunately, by adsorption (hydrophobic interaction), a high immobilization efficiency of CRL was obtained using macroporous resins with hydrophobic octadecyl groups with an immobilization efficiency of 86.5%, enzyme loading of 138.5 mg g-1 and enzyme activity of 34.7 U g-1 . The results showed that a 95.1% yield could be obtained with a molar ratio of oleic acid to pine sterol of 5:1, an enzyme amount of 6.0 U g-1 (relative to pine sterol mass) at 50 °C for 48 h.

CONCLUSION

The hydrophobic macroporous resin (ECR8806M) with a large specific surface area and abundant functional groups was used to achieve efficient immobilization of CRL. CRL@ECR8806M is an efficient catalyst for the synthesis of phytosterol esters and has the potential for further large-scale applications. Therefore, this simple, green, and low-cost strategy for lipase immobilization provides new possibilities for the high-efficiency production of pine sterol esters and other food source nutrients. © 2023 Society of Chemical Industry.

An Up-to-Date Review on the Remediation of Dyes and Phenolic Compounds from Wastewaters Using Enzymes Immobilized on Emerging and Nanostructured Materials: Promises and Challenges

Addressing the critical issue of water pollution, this review article emphasizes the need to remove hazardous dyes and phenolic compounds from wastewater. These pollutants pose severe risks due to their toxic, mutagenic, and carcinogenic properties. The study explores various techniques for the remediation of organic contaminants from wastewater, including an enzymatic approach. A significant challenge in enzymatic wastewater treatment is the loss of enzyme activity and difficulty in recovery post-treatment. To mitigate these issues, this review examines the strategy of immobilizing enzymes on newly developed nanostructured materials like graphene, carbon nanotubes (CNTs), and metal-organic frameworks (MOFs). These materials offer high surface areas, excellent porosity, and ample anchoring sites for effective enzyme immobilization. The review evaluates recent research on enzyme immobilization on these supports and their applications in biocatalytic nanoparticles. It also analyzes the impact of operational factors (e.g., time, pH, and temperature) on dye and phenolic compound removal from wastewater using these enzymes. Despite promising outcomes, this review acknowledges the challenges for large-scale implementation and offers recommendations for future research to tackle these obstacles. This review concludes by suggesting that enzyme immobilization on these emerging materials could present a sustainable, environmentally friendly solution to the escalating water pollution crisis.

Is enzyme immobilization a mature discipline? Some critical considerations to capitalize on the benefits of immobilization

Enzyme immobilization has been developing since the 1960s and although many industrial biocatalytic processes use the technology to improve enzyme performance, still today we are far from full exploitation of the field. One clear reason is that many evaluate immobilization based on only a few experiments that are not always well-designed. In contrast to many other reviews on the subject, here we highlight the pitfalls of using incorrectly designed immobilization protocols and explain why in many cases sub-optimal results are obtained. We also describe solutions to overcome these challenges and come to the conclusion that recent developments in material science, bioprocess engineering and protein science continue to open new opportunities for the future. In this way, enzyme immobilization, far from being a mature discipline, remains as a subject of high interest and where intense research is still necessary to take full advantage of the possibilities.

Immobilization and bioimprinting strategies to enhance the performance in organic medium of the metagenomic lipase LipC12

The present work evaluates the immobilization of LipC12 on different supports in tandem with bioimprinting technique, in order to improve its activity and stability in organic medium. Oleic acid was selected as the bioimprinting molecule. The immobilized LipC12 was applied in the synthesis of pentyl oleate by esterification reaction and in the production of fatty acids, mono, and diglycerides via hydrolysis of triacylglycerols, in n-heptane reaction media. For all immobilized lipase preparations, an increase in the conversion of oleic acid to pentyl oleate was observed when immobilization in tandem with bioimprinting treatment was carried out versus immobilization without bioimprinting. The highest conversions were achieved using LipC12 immobilized on hydrophobic supports. The reuse potential of the immobilized preparations was evaluated. The preparations were used in eight successive cycles of esterification reactions and the best results were obtained for LipC12 immobilized on Immobead 150 and chitosan. The activity for the hydrolysis of soybean oil was improved by bioimprinting treatment only for LipC12 immobilized on commercial polypropylene and Accurel MP-1000. LipC12 immobilized on hydrophilic supports or on Immobead150 could be used to hydrolyze tricaprylin to obtain diglycerides with a high proportion of 1,2-diglycerides in reaction times as short as 30 min.

Candida rugosa lipase immobilized on hydrophobic support Accurel MP 1000 in the synthesis of emollient esters

OBJECTIVES

To immobilize Candida rugosa lipase in Accurel MP 1000 (CRL-AMP) by physical adsorption in organic medium and apply in the synthesis of wax esters dodecanoyl octadecanoate 1 and hexadecanoyl octadecanoate 2 in a heptane medium, as well as evaluating the stability and recyclability of CRL-AMP in six reaction cycles.

RESULTS

The specific activity (A_sp) for CRL-AMP was 200 ± 20 U mg^-1. Its catalytic activity was 1300 ± 100 U g^-1. CRL-AMP was used in the synthesis of esters in heptane medium with a 1:1 acid:alcohol molar ratio at 45 °C and 200 rpm. In synthesis 1, conversion was 62.5 ± 3.9% in 30 min at 10% m v^-1 and 56.9 ± 2.8% in 54 min at 5% m v^-1; while in synthesis 2, conversion was 79.0 ± 3.9% in 24 min at 10% m v^-1, and 46.0 ± 2.4% in 54 min at 5% m v^-1. Reuse tests after six consecutive cycles of reaction showed that the biocatalyst retained approximately 50% of its original activity for both reaction systems.

CONCLUSIONS

CRL-AMP showed a high potential in the production of wax esters, since it started from low enzymatic load and high specific activities and conversions were obtained, in addition to allowing an increase in stability and recyclability of the prepared biocatalyst.

Efficient hydrolysis of wine and grape juice anthocyanins by Malbranchea pulchella β-glucosidase immobilized on MANAE-agarose and ConA-Sepharose supports

β-glucosidases (BGLs) hydrolyze short-chain cellulooligosaccharides. Some BGLs can hydrolyze anthocyanins and be applied in the clarification process of food industries, especially grape juice and wine. Enzyme immobilization is a valuable tool to increase enzyme stabilization. In this work, Malbranchea pulchella BGL was immobilized on Monoaminoethyl-N-ethyl-agarose ionic support, MANAE-agarose, and Concanavalin A-Sepharose affinity support, Con-A-Sepharose. The formed biocatalysts, denominated BLG-MANAE and BLG-ConA, were applied in the grape juice and red wine clarification. BGL-MANAE and BGL-ConA hyperactivated M. pulchella BGL 10- and 3-fold, respectively. Both biocatalysts showed at least 70% activity at pH range 2-11, until 24 h incubation. BGL-MANAE and BGL-ConA showed activity of 60% and 100%, respectively, at 50 °C, up to 24 h. Both biocatalysts were efficiently reused 20-fold. They were stable in the presence of up to 0.1 M glucose for 24 h incubation, and with 5%, 10% and 15% ethanol kept up to 70% activity. BGL-MANAE biocatalyst was 11% and 25% more efficient than BGL-ConA in clarification of concentrate and diluted wines, respectively. Likewise, BGL-MANAE biocatalysts were 14% and 33% more efficient than the BGL-ConA in clarification of diluted and concentrated juices, respectively. Therefore, the BGL-MANAE biocatalyst was especially effective in red wine and grape juice clarification.

Hairy Particles with Immobilized Enzymes: Impact of Particle Topology on the Catalytic Activity

Enzymes are described as ideal green biocatalysts because they are highly specific and selective. However, their practical application is hampered because of the low stability and missing reusability of free enzymes. One method to overcome these problems is the immobilization of enzymes onto carriers. Although numerous publications discuss different immobilization strategies, optimization of these carriers for the highest enzyme activity and loading capacity, enzyme selectivity, reusability, and reactor system configuration still remains a challenging task. In this contribution, we aim to address the role of the core-shell particle design with respect to their geometry as well as the polymer shell thickness on the immobilization of biomolecules. We discovered that spherical particles with a core diameter of 200 nm and intermediate shell thickness as well as platelet-like particles exhibited excellent results with a maximum immobilization yield of laccase from Trametes versicolor of up to 92% and an activity on the carrier material of 5.722 U/(g particle). Especially, the platelet-like particles offered a scalable and convenient alternative for the immobilization of laccase. Circular dichroism measurements proved that the secondary structure of the enzyme is not impaired by immobilization onto all kinds of carrier particles. Moreover, the immobilized laccase was successfully used for the decolorization of Cibacron blue P-3R in up to 18 cycles. Finally, particle separation was achieved via citrate-induced flocculation within 10 min. This detailed study contributes to the understanding of rational design of catalytically active hybrid materials and their effective performance at interfaces for applications in textile industry and environmental technologies.

Novozym 435: the “perfect” lipase immobilized biocatalyst?

Novozym 435 (N435) is a commercially available immobilized lipase produced by Novozymes with its advantages and drawbacks.

Enzyme Immobilization: An Overview on Methods, Support Material, and Applications of Immobilized Enzymes

Immobilized enzymes can be used in a wide range of processes. In recent years, a variety of new approaches have emerged for the immobilization of enzymes that have greater efficiency and wider usage. During the course of the last two decades, this area has rapidly expanded into a multidisciplinary field. This current study is a comprehensive review of a variety of literature produced on the different enzymes that have been immobilized on various supporting materials. These immobilized enzymes have a wide range of applications. These include applications in the sugar, fish, and wine industries, where they are used for removing organic compounds from waste water. This study also reviews their use in sophisticated biosensors for metabolite control and in situ measurements of environmental pollutants. Immobilized enzymes also find significant application in drug metabolism, biodiesel and antibiotic production, bioremediation, and the food industry. The widespread usage of immobilized enzymes is largely due to the fact that they are cheaper, environment friendly, and much easier to use when compared to equivalent technologies.

Towards A Deeper Understanding of the Interfacial Adsorption of Enzyme Molecules in Gigaporous Polymeric Microspheres

Compared with the one immobilized in the conventional mesoporous microspheres, the enzyme immobilized in gigaporous microspheres showed much higher activity and better stability. To gain a deeper understanding, we herein selected lipase as a prototype to comparatively analyze the adsorption behavior of lipase at interfaces in gigaporous and mesoporous polystyrene microspheres at very low lipase concentration, and further compared with the adsorption on a completely flat surface (a chip). Owing to the limited space of narrow pores, lipase molecules were inclined to be adsorbed as a monolayer in mesoporous microspheres. During this process, the interaction between lipase molecules and the interface was stronger, which could result in the structural change of lipase molecular and compromised specific activity. In addition to monolayer adsorption, more multilayer adsorption of enzyme molecules also occurred in gigaporous microspheres. Besides the adsorption state, the pore curvature also affected the lipase adsorption. Due to the multilayer adsorption, the excellent mass transfer properties for the substrate and the product in the large pores, and the small pore curvature, lipase immobilized in gigaporous microspheres showed better behaviors.

Synthesis and evaluation of antibacterial activity of (R)-2-methylheptyl isonicotinate, a putative naturally occurring bioactive agent

A putative antibacterial and antifungal compound, (R)-2-methylheptyl isonicotinate, was synthesized via reductive lactone alkylation of (R)-4-methyldihydrofuran-2(3H)-one. Structural characterisation data as well as bioassay results (with Bacillus subtilis or Escherichia coli) contradict those previously reported.

Properties of bacterial laccases and their application in bioremediation of industrial wastes

The bioremediation process of industrial waste can be made more efficient using ligninolytic laccase enzymes, which are obtained from fungi, bacteria, higher plants, insects, and also in lichen. Laccase are catalyzed in the mono-electronic oxidation of a substrate from the expenditure of molecular oxygen. This enzyme belongs to the multicopper oxidases and participates in the cross linking of monomers, involved in the degradation of wide range industrial pollutants. In recent years, these enzymes have gained application in pulp and paper, textile and food industries. There are numerous reviews on laccases; however, a lot of information is still unknown due to their broad range of functions and applications. In this review, the bacterial laccases are focused for the bioremediation of various industrial pollutants. A brief description on structural molecular and physicochemical properties has been made. Moreover, the mechanism by which the reaction is catalyzed, the physical basis of thermostability and enantioselectivity, which requires more attention from researchers, and applications of laccase in various fields of biotechnology are pointed out.

Immobilization and Biochemical Properties of the Enantioselective Recombinant NStcI Esterase of Aspergillus nidulans

The recombinant NStcI A. nidulans esterase was adsorbed on Accurel MP1000, where protein yield and immobilization efficiency were 42.48% and 81.94%, respectively. Storage stability test at 4°C and RT showed 100% of residual activity after 40 days at both temperatures. The biocatalyst retains more than 70% of its initial activity after 3 cycles of repeated use. Biochemical properties of this new biocatalyst were obtained. Maximum activity was achieved at pH 11 and 30°C, while the best stability was observed with the pH between 9 and 11 at 40°C. NStcI thermostability was increased after immobilization, as it retained 47.5% of its initial activity after 1 h at 60°C, while the free enzyme under the same conditions displayed no activity. NStcI preserved 70% of its initial activity in 100% hexane after 72 h. Enzymatic kinetic resolution of (R,S)-1-phenylethanol was chosen as model reaction, using vinyl acetate as acyl donor. After optimization of reaction parameters, the highest possible conversion (42%) was reached at 37°C, a_w of 0.07, and 120 h of bioconversion in hexane with an enantiomeric excess of 71.7%. NStcI has selectivity for (R)-enantiomer. The obtained E value (31.3) is in the range considered useful to resolve enantiomeric mixtures.

Enzyme immobilization: an overview on techniques and support materials

The current demands of the world’s biotechnological industries are enhancement in enzyme productivity and development of novel techniques for increasing their shelf life. These requirements are inevitable to facilitate large-scale and economic formulation. Enzyme immobilization provides an excellent base for increasing availability of enzyme to the substrate with greater turnover over a considerable period of time. Several natural and synthetic supports have been assessed for their efficiency for enzyme immobilization. Nowadays, immobilized enzymes are preferred over their free counterpart due to their prolonged availability that curtails redundant downstream and purification processes. Future investigations should endeavor at adopting logistic and sensible entrapment techniques along with innovatively modified supports to improve the state of enzyme immobilization and provide new perspectives to the industrial sector.

Selection of CalB immobilization method to be used in continuous oil transesterification: analysis of the economical impact

Enzymatic transesterification of triglycerides in a continuous way is always a great challenge with a large field of applications for biodiesel, bio-lubricant, bio-surfactant, etc. productions. The lipase B from Candida antarctica (CalB) is the most appreciated enzyme because of its high activity and its non-regio-selectivity toward positions of fatty acid residues on glycerol backbone of triglycerides. Nevertheless, in the field of heterogeneous catalysis, we demonstrated that the medium hydrophilic nature of the support used for its commercial form (Lewatit VPOC1600) is a limitation. Glycerol is adsorbed onto support inducing drastic decrease in enzyme activity. Glycerol would form a hydrophilic layer around the enzyme resulting in diffusional limitations during triglyceride transfer to the enzyme. Accurel MP, a very hydrophobic macroporous polymer of propylene, was found not to adsorb glycerol. Immobilization conditions using this support were optimized. The best support was Accurel MP1001 (particle size<1000 μm) and a pre-treatment of the support with acetone instead of ethanol enables the adsorption rate and the immobilized enzyme quantity to be maximized. An economical approach (maximization of the process net present value) was expanded in order to explore the impact of immobilization on development of an industrial packed bed reactor. The crucial ratio between the quantity of lipase and the quantity of support, taking into account enzyme, support and equipped packed bed reactor costs was optimized in this sense. The biocatalyst cost was found as largely the main cost centre (2-10 times higher than the investments for the reactor vessel). In consequence, optimal conditions for immobilization were a compromise between this immobilization yield (90% of lipase immobilized), biocatalyst activity, reactor volume and total investments.