Novel quinoline derivatives as green corrosion inhibitors for mild steel in acidic medium: Electrochemical, SEM, AFM, and XPS studies

Advancements in ionic liquid-based corrosion inhibitors for sustainable protection strategies: from experimental to computational insights

The global corrosion cost is estimated to be around 2.5 trillion USD, which is more than 3 % of the global GDP. Against this background, large efforts have been made to find effective corrosion inhibitors. Ionic liquids (ILs) are nowadays regarded as reliable functional materials and one of the most promising classes of anticorrosion agents. Not only are they efficient in preventing corrosion of iron and other metals, but they are also relatively inexpensive, need no solvents, and are non-toxic to humans This review addresses both experimental and theoretical investigations conducted to IL-based corrosion inhibitors (CIs). It covers various ILs used, synthesis methods, and their performance in diverse corrosive environments. Electrochemical techniques like EIS and potentiodynamic polarization, along with computational approaches including quantum chemical calculations and DFT, provide valuable insights into corrosion inhibition mechanisms and the interactions between anticorrosion agents-surfaces. The synergistic combination of experimental and theoretical approaches enhances our understanding of corrosion inhibition, enabling the design and optimization of effective and sustainable corrosion protection strategies. This review consolidates the existing knowledge on ionic liquid-based corrosion inhibitors, highlights the key findings from both experimental and theoretical investigations, and points out possible directions for further studies in this area.

Atomic-Level Insights into the Adsorption of Methyl-Substituted Quinoxalinones on Fe(110): A Dispersion-Corrected DFT Analysis

Corrosion of metallic equipment is a critical issue across various industries, necessitating the development of advanced protective strategies. This study utilized dispersion-corrected density functional theory (DFT) with Becke-Johnson D3(BJ) to examine the atomic-level adsorption of quinoxalinones on Fe(110) surfaces, focusing on optimizing substitution strategies to enhance corrosion inhibition. Three quinoxalinones, quinoxalin-2(1H)-one (QNO), 3-methylquinoxalin-2(1H)-one (QNOM), and 3,7-dimethylquinoxalin-2(1H)-one (QNO2M), were investigated in various configurations and protonation states. Protonated quinoxalinones demonstrated a stronger surface affinity, primarily interacting through oxygen atoms and conjugated systems, with greater energetic stability compared to neutral molecules, driven by enhanced electrostatic interactions and charge transfer mechanisms. The parallel adsorption configuration was more stable than the perpendicular mode, which in some adsorption systems did not form bonds with the iron surface. Notably, the presence of methyl substitutions did not significantly enhance adsorption strength; QNO exhibited higher energetic stability due to reduced steric interference, which maintained its planarity. Projected density of states (PDOS), electron density difference (EDD), and electron localization function (ELF) analyses confirmed the importance of charge transfer between quinoxalinone active sites and the 3d orbitals of iron in stabilizing the adsorption of molecules. These findings underscore the importance of judicious quinoxalinone functionalization to preserve their efficacy as corrosion inhibitors.

Synthesis of a new quaternary ammonium salt for efficient inhibition of mild steel corrosion in 15 % HCl: Experimental and theoretical studies

The corrosion phenomenon and its economic impacts can hardly be ignored in any application. This study synthesized a quaternary ammonium salt (3) containing hydrophobic dodecyl and electron-rich diallylbenzyl amine moieties to be used in 15 % HCl as a corrosion inhibitor of mild steel. Several techniques, such as 1H and 13C NMR, IR, TGA, and elemental analysis, have been used to characterize inhibitor 3. Popular corrosion measurement techniques, namely weight loss, potentiodynamic polarization techniques, and electrochemical impedance spectroscopy, have been used to determine the efficiency of inhibitor 3. At 303 K and a moderately low concentration of 50 ppm, the quaternary ammonium salt-based inhibitor demonstrated a maximum efficiency of ≈95.0 %. At elevated temperatures of 313, 323, and 333 K, the inhibition efficacy values were recorded as 91.3, 82.8, and 75.0 %, respectively. Adsorption isotherm study revealed that the adsorption of inhibitor 3 followed Langmuir adsorption isotherm. The value ofΔ G a d s ° was found to be - 40.19 kJ mol-1, indicating that inhibitor 3 became adsorbed via a mixed physi-chemisorption mechanism. A very high adsorption constant (K a d s ) of 1.53 × 105 L mol-1 suggested strong adsorption of inhibitor 3. The difference in activation energy (E a ) value of 42.4 kJ mol-1 between the control and the inhibited solution indicated an efficient adsorption of inhibitor 3. The ability of inhibitor 3 to retard both anodic and cathodic half-cell reactions was proved via open circuit potential and Tafel curves studies. Detailed discussions on the change in corrosion current densities (i c o r r ), polarization (R p ) and charge transfer (R c t ) resistances have been offered to discuss the inhibition efficiency. Water contact angle measurement showed a drastic increase in mild steel surface hydrophobicity following inhibitor 3 adsorption. SEM-EDX and XPS studies confirmed the definitive presence of inhibitor 3 on the mild steel surface. Density functional theory (DFT) studies revealed the frontier molecular orbitals with which the metal surface interacts. A detailed corrosion inhibition mechanism has been offered in the context of adsorption isotherm and DFT studies.

Atomistic Analysis of Sulphonamides as a Microbial Influenced Corrosion (MIC) Inhibitor

Four sulfonamide-type microbial inhibitors were studied using density functional theory (DFT) to assess their effectiveness in controlling microbial corrosion. The experimental techniques (FTIR, SEM, EIS, EFM, and AFM) are beneficial for measuring properties such as chemical composition, bond formation, electrochemical behavior, and surface topography; however, DFT can be useful as a new method for understanding microbial corrosion. Sulfacetamide (SFC), sulfamerazine (SFM), sulfapyridine (SFP), and sulfathiazole (SFT) uniformly adsorb onto the iron surface and block the active site, reducing the corrosion rate. To study the effect on microbial activity, a 0.6 eV electric field was applied. The absolute increase in the interaction energy indicates that sulfonamides are effective microbial inhibitors. Electronic SFC, SFM, SFP, and SFT descriptors agree with the experimental inhibition efficiency. The shift of the density of state (DOS) toward a low energy level for sulfonamides indicates the stabilization of these molecules at the Fe (100) surface. The population analysis combined with atomic and molecular parameters further explains the anticorrosive mechanism of sulphonamides.

Helmet-Roled Molecules Carrying Double Metronidazole Frameworks and Phenyl Ring for Strengthening Adsorption and Anticorrosion on Mild Steel

This study prepared new helmet-roled molecules (HMs) carrying metronidazole frameworks and a phenyl ring for strengthening adsorption and anticorrosion on mild steel. The adsorption of the HMs on the copper surface was understood by material simulation computation. Furthermore, the surface analysis experiments suggest that the studied molecules could be adsorbed to a mild steel surface through the chemical coordination bonding. The remarkable corrosion resistance of the HMs for mild steel in HCl was surveyed by potentiodynamic polarization and electrochemical impedance spectroscopy at 298 K. The HMs including two metronidazole skeletons displayed the stronger corrosion inhibition effect on mild steel than the HM1 bearing one single metronidazole part (the corrosion inhibition efficiency, HM3, 98.03%, HM2, 95.14%, HM1, 88.72%). The results presented in this study provided an efficient strategy to develop new clinical medicine-based corrosion inhibitors for metal in acid medium through molecular preconstruction.

Flawless polyaniline coating for preservation and corrosion protection of ancient steel spearheads: an archaeological study from military museum, Al-Qala, Egypt

The purpose of this research was to examine the viability of applying a flawless polyaniline coating on steel spearheads to preserve them and protect them from corrosion. The spearpoints, thought to be archaeologically significant, were acquired from the Military Museum in Al-Qala, Egypt. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy were used to characterize the spearheads chemical composition and microstructure (EDX). The spearheads were determined to be constructed of steel and to have a coating of ferric oxide and other corrosion products on their exteriors. After that, a flawless polyaniline coating was electrochemically deposited onto the spearpoints in a way that was both quick and cheap. Many types of corrosion tests, such as electrochemical impedance spectroscopy and potentiodynamic polarization (PDP) readings, were used to determine the coating's effectiveness. The steel spearheads' findings revealed a significant improvement in their resistance to corrosion after being coated with flawless polyaniline. The coating served as a barrier, blocking out water and other corrosive substances and slowing the buildup of corrosion byproducts on the spearpoints. In conclusion, our research shows that a flawless polyaniline coating may be an effective anti-corrosion treatment for ancient steel artifacts. The approach is straightforward, cheap, and readily scalable for massive conservation efforts.

Halogen-Free Functional Quaternary Ammonium-Based Ionic Liquid as an Ecofriendly Corrosion Inhibitor for Q235 Steel in Acids

A halogen-free quaternary ammonium-based ionic liquid functionalized with benzotriazole, BTA-16-BTA, was synthesized. Its anticorrosion effects on Q235 steel were evaluated in two different acids (6 M HCl or 1 M H3PO4) by weight loss and electrochemical tests. BTA-16-BTA shows the best performance at 30 °C with the highest inhibition efficiencies of 98.84% in 6 M HCl and 96.40% in 1 M H3PO4. The adsorption behavior of BTA-16-BTA molecules on Q235 steel in HCl solution obeys the Langmuir isotherm with an adsorption energy of about -40 kJ·mol-1, which implies chemisorption. Quantum chemistry calculation indicates that the chemical adsorption originated from the injection of π-electrons from inhibitor molecules into empty 3d orbitals of Fe atoms. The tight adsorption of inhibitor molecules and associated dehydration of the steel surface promoted the corrosion inhibition in HCl solutions. In H3PO4 solutions, passivation by phosphate anions and adsorption of inhibitor molecules contributed synergistically to the excellent anticorrosion performance.

Novel synthesized triazole derivatives as effective corrosion inhibitors for carbon steel in 1M HCl solution: experimental and computational studies

This article outlines the synthesis of two derivatives of 4-amino-5-hydrazineyl-4H-1,2,4-triazole-3-thiol for the prevention of carbon steel corrosion in 1M HCl solution. These derivatives are (Z)-3-(1-(2-(4-amino-5-mercapto-4H-1,2,4-triazol-3-yl)hydrazono)ethyl)-2H-chromen-2-one (TZ1) and 5-(2-(9H-fluoren-9-ylidene)hydrazineyl)-4-amino-4H-1,2,4-triazole-3-thiol (TZ2). Weight loss, electrochemical experiments, surface examinations, and theoretical computation are used to evaluate the effectiveness of the two compounds to be used as corrosion inhibitors. Weight loss and electrochemical studies demonstrate that these derivatives reduce the corrosion rate of carbon steel. To examine the morphology and constitution of the carbon steel surface submerged in HCl solution as well as after adding inhibitors, surface examination tests are performed. Analysis of the test solution via UV-visible spectroscopy is employed to check the possibility of complex formation between inhibitor molecules and Fe2+ ions released during the corrosion process. In order to explore their biological activity, the antibacterial activity was investigated against (E. coli and Bacillus subtilis). Finally, theoretical confirmation of the experimental findings is provided by quantum chemical (DFT) and Monte Carlo (MC) simulation studies. More adsorption sites are present in the derivatives of 4-amino-5-hydrazineyl-4H-1,2,4-triazole-3-thiol, which offer a novel perspective for developing new classes of corrosion inhibitors with substantial protective efficacy, especially at high temperatures.

Frontiers and advances in N-heterocycle compounds as corrosion inhibitors in acid medium: Recent advances

The acid solution is widely used in chemical cleaning, oil well acidifying, and other fields, which also brings the problem of metal corrosion that cannot be underestimated. However, adding an inhibitor is one of the most convenient and effective ways to slow down metal corrosion. N-heterocyclic compounds with high stability and durability, in line with the strategy of sustainable development, have been widely studied in an acidic environment. Imidazole, pyridine, and quinoline compounds, as the most commonly used corrosion inhibitors, can form a compact protective film via π electron cloud shifting towards the N atoms to generate coordination function. In particular, flexible modifiability makes N-heterocyclic compounds adapt to different corrosion environments readily, conducive to the formation of chemical bonds between compounds with metal surfaces to be better adsorption, so as to avoid the blemish of traditional inhibitors (such as inorganic salt and organic amines inhibitors) due to excessive usage, surface roughness of metal or environmental factor (for instance, temperature, pH and metallic) causing loose bonding between film and metal surface. More importantly, the efficient corrosion inhibition and toxicity of N-heterocyclic compounds have close to do with their own functional groups. Combined with the latest research achievement, the effects of different substituents on the corrosion inhibition and corrosion inhibition mechanisms were systematically reviewed in the acid-corrosive solution of imidazole, pyridine, and quinoline and their derivatives in this review article, respectively. In addition, the application and function of density functional theory in predicting the corrosion inhibition effect of corrosion inhibitors are also discussed. The future development trend was prospected according to the summarized research results.

Synthesis, description, and application of novel corrosion inhibitors for CS AISI1095 in 1.0 M HCl based on benzoquinoline derivatives

This study aims to synthesize and evaluate the corrosion inhibition properties of three newly prepared organic compounds based on benzo[h]quinoline hydrazone derivatives. The compounds structure were characterised using FTIR, 1H-NMR, 13C-NMR and Mass spectroscopy. Electrochemical methods, including Potentiodynamic Polarization (PP), Electrochemical Frequency Modulation (EFM), and Electrochemical Impedance Spectroscopy (EIS) were employed to evaluate the compounds as corrosion inhibitors in HCl (1.0 M) for carbon steel (CS). Additionally, surface examination techniques such as scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) were used to investigate the surface morphology and elemental composition of the CS before and after exposure to the synthesized compounds. The electrochemical measurements showed that compound VII achieved corrosion inhibition efficiency. SEM and EDX analysis further confirmed the creation of a passive film on the CS surface. These findings demonstrated the potential of benzo[h]quinoline hydrazone derivatives as effective organic corrosion inhibitors for CS in aggressive solution.

The curious case of polyphenols as green corrosion inhibitors: a review on their extraction, design, and applications

Over the past century, a substantial amount of research focused on developing corrosion inhibitors, with a special focus on green "plant-based" corrosion inhibitors. Among the various types of inhibitors, polyphenols emerged as a promising candidate due to their advantageous characteristics, which include being inexpensive, biodegradable, renewable, and, most importantly, safe for both the environment and humans. Their performance as sustainable corrosion inhibitors have encouraged many electrochemical experiments as well as theoretical, mechanistic, and computational studies, with many papers reporting inhibition efficiencies of over 85%. In this review, the majority of literature contributions on the inhibition of various types of polyphenols, their natural extraction techniques, and their applications as "greener" corrosion inhibitors for metals are thoroughly described and discussed with a focus on their preparation, inhibition mechanism, and performance. Based on the reviewed literature, it can be concluded that polyphenols have a very promising potential to be used as both green and powerful corrosion inhibitors; therefore, further investigations, experimental or computational, are still required to realize higher inhibition efficiencies reaching up to ≈ 100%.

Some Brassicaceae Extracts as Potential Antioxidants and Green Corrosion Inhibitors

Glucosinolates-rich extracts of some Brassicaceae sources, such as broccoli, cabbage, black radish, rapeseed, and cauliflower, were obtained using an eco-friendly extraction method, in a microwave field, with 70% ethanol, and evaluated in order to establish their in vitro antioxidant activities and anticorrosion effects on steel material. The DPPH method and Folin-Ciocâlteu assay proved good antioxidant activity (remaining DPPH, 9.54-22.03%) and the content of total phenolics between 1008-1713 mg GAE/L for all tested extracts. The electrochemical measurements in 0.5 M H₂SO₄ showed that the extracts act as mixed-type inhibitors proving their ability to inhibit corrosion in a concentration-dependent manner, with a remarkable inhibition efficiency (92.05-98.33%) achieved for concentrated extracts of broccoli, cauliflower, and black radish. The weight loss experiments revealed that the inhibition efficiency decreased with an increase in temperature and time of exposure. The apparent activation energies, enthalpies, and entropies of the dissolution process were determined and discussed, and an inhibition mechanism was proposed. An SEM/EDX surface examination shows that the compounds from extracts may attach to the steel surface and produce a barrier layer. Meanwhile, the FT-IR spectra confirm bond formation between functional groups and the steel substrate.

New coating formulation based on synthesized benzodiazepine derivatives as double function additives for industrial application

Purpose

The purpose of this study is to develop a new protective coating formulation for industrial use, using benzodiazepine derivatives as double function additives.

Design/methodology/approach

Benzodiazepine’s derivatives of types (3–5) were prepared and confirmed by infrared, Mass, 1H-Proton nuclear magnetic resonance (NMR) and 13C NMR spectra. The synthesized compound was physically incorporated in the alkyd paint formulation by pebble mill grinding until all particulates are smaller than 20 ums. The prepared coatings were applied by air spray on steel panels. The physical, mechanical characteristics, corrosion resistance and antimicrobial test of the prepared coatings were studied to evaluate the prepared compounds drawbacks.

Findings

The results of the mechanical and physical properties of the paint formulation revealed that the paint formulation incorporating benzodiazepines derivatives 3–5 performed best and improved corrosion-resistance and antibacterial activity tests.

Research limitations/implications

In alkyd paint, heterocyclic compounds are the most used antibacterial additives. Other functionalities of these compounds, such as corrosion inhibitors, might be studied to see if they are suited for these applications.

Practical implications

Because of the activity of various benzodiazepine derivatives, which may be attributable to the presence of some function groups such as sulfonamide aromatic amino NH2 group, and elements such as Sulphur, Nitrogen, Chlorine, in its chemical structure. As a result, paint compositions including these compounds as additives can be used as dual-purpose paint and for a variety of industrial applications.

Originality/value

The research demonstrates how a low-cost paint composition based on synthesized benzodiazepine derivatives 3–5 may be used as a dual-function paint for industrial use.

Inhibition Mechanism of Some Vinylalkylimidazolium-Based Polymeric Ionic Liquids against Acid Corrosion of API 5L X60 Steel: Electrochemical and Surface Studies

A corrosion inhibition mechanism of API 5L X60 steel exposed to 1.0 M H₂SO₄ was proposed from the evaluation of three vinylalkylimidazolium poly(ionic liquids) (PILs), employing electrochemical and surface analysis techniques. The synthesized PILs were classified as mixed-type inhibitors whose surface adsorption was promoted mainly by bromide and imidazolate ions, which along with vinylimidazolium cations exerted a resistive effect driven by a charge transfer process by means of a protective PIL film with maximal efficiency of 85% at 175 ppm; the steel surface displayed less surface damage due to the formation of metal-PIL complex compounds.

Corrosion Inhibition of Mild Steel in Hydrochloric Acid Environment Using Terephthaldehyde Based on Schiff Base: Gravimetric, Thermodynamic, and Computational Studies

Using traditional weight-loss tests, as well as different electrochemical techniques (potentiodynamic polarization and electrochemical impedance spectroscopy), we investigated the corrosion-inhibition performance of 2,2′-(1,4-phenylenebis(methanylylidene)) bis(N-(3-methoxyphenyl) hydrazinecarbothioamide) (PMBMH) as an inhibitor for mild steel in a 1 M hydrochloric acid solution. The maximum protection efficacy of 0.0005 M of PMBMH was 95%. Due to the creation of a protective adsorption layer instead of the adsorbed H2O molecules and acidic chloride ions, the existence of the investigated inhibitor reduced the corrosion rate and increased the inhibitory efficacy. The inhibition efficiency increased as the inhibitor concentration increased, but it decreased as the temperature increased. The PMBMH adsorption mode followed the Langmuir adsorption isotherm, with high adsorption-inhibition activity. Furthermore, the value of the ∆Gadso indicated that PMBMH contributed to the physical and chemical adsorption onto the mild-steel surface. Moreover, density functional theory (DFT) helped in the calculation of the quantum chemical parameters for finding the correlation between the inhibition activity and the molecular structure. The experimental and theoretical findings in this investigation are in good agreement.

Newly Synthesized Morpholinyl Mannich Bases as Corrosion Inhibitors for N80 Steel in Acid Environment

New Mannich bases, 3-morpholino-1-phenylpropan-1-one (MPO) and 3-morpholino-1-phenyl-3-(pyridin-4-yl) propan-1-one (MPPO), were synthesized, characterized, and studied as corrosion inhibitors for N80 steel in 1 M hydrochloric acid (HCl) solution using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and FT-IR spectroscopy. The inhibition efficiency increases with increasing inhibitor concentrations, and the corrosion inhibition efficiency of the MPO and MPPO could reach 90.3% and 91.4%, respectively, at a concentration of 300 ppm at 305 K. The effect of the temperature on the corrosion inhibition behavior of inhibitors was discussed. Electrochemical tests showed that the synthesized inhibitors are mixed. The EIS test results showed that the presence of MPO and MPPO reduced the double-layer capacitance in the corrosion process, thereby reducing the charge transfer resistance. The SEM and EDX results showed that the MPO and MPPO formed a uniform adsorption film on the surface of the N80 steel. The adsorption mechanism of the inhibitors was simulated with different adsorption models and the results showed that the inhibitors were the chemisorbed type. The results of the FT-IR spectroscopy proved that the inhibitor interacted with metal atoms on the steel surface.

Green inhibitor of carbon steel corrosion in 1 M hydrochloric acid: Eruca sativa seed extract (experimental and theoretical studies)

The adsorption activity and inhibition effect of Eruca sativa seed extract as a green inhibitor for the dissolution of carbon steel in 1 M hydrochloric acid solution were investigated. In this study, we used a chemical technique (gravimetric method), electrochemical techniques, electrical frequency modulation (EFM), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques, and theoretical studies. In addition to these techniques, we examined the surface morphology of the carbon steel utilizing different methods. The measurements of the polarization technique indicate that this extract acts as a mixed-type inhibitor. Thermodynamic parameters were calculated and discussed. The adsorption of Eruca sativa seed extracts on the alloy obeys the Langmuir and Henry adsorption isotherms. The extract gives an excellent inhibition efficiency 94.8% by a gravimetric method at 0.3 g L-1 from the extract. The relationship between the calculated % IE from experiments and the theoretical studies was established.

4-Phenylcoumarin (4-PC) Glucoside from Exostema caribaeum as Corrosion Inhibitor in 3% NaCl Saturated with CO2 in AISI 1018 Steel: Experimental and Theoretical Study

The corrosion inhibition of 5-O-β-D-glucopyranosyl-7-methoxy-3′,4′-dihydroxy-4-phenylcoumarin (4-PC) in AISI 1018 steel immersed in 3% NaCl + CO₂ was studied by electrochemical impedance spectroscopy (EIS). The results showed that, at just 10 ppm, 4-PC exerted protection against corrosion with ղ = 90% and 97% at 100 rpm. At static conditions, the polarization curves indicated that, at 5 ppm, the inhibitor presented anodic behavior, while at 10 and 50 ppm, there was a cathodic-type inhibitor. The inhibitor adsorption was demonstrated to be chemisorption, according to the Langmuir isotherm for 100 and 500 rpm. By means of SEM–EDS, the corrosion inhibition was demonstrated, as well as the fact that the organic compound was effective for up to 72 h of immersion. At static conditions, dispersion-corrected density functional theory results reveal that the chemical bonds established by the phenyl group of 4-PC are responsible of the chemisorption on the steel surface. According with Fukui reactivity indices, the molecules adsorbed on the metal surface provide a protective cover against nucleophilic and electrophilic attacks, pointing to the corrosion inhibition properties of 4-PC.

Croton lechleri Extracts as Green Corrosion Inhibitors of Admiralty Brass in Hydrochloric Acid

Croton lechleri, commonly known as Dragon’s blood, is a tree cultivated in the northwest Amazon rainforest of Ecuador and Peru. This tree produces a deep red latex which is composed of different natural products such as phenolic compounds, alkaloids, and others. The chemical structures of these natural products found in C. lechleri latex are promising corrosion inhibitors of admiralty brass (AB), due to the number of heteroatoms and π structures. In this work, three different extracts of C. lechleri latex were obtained, characterized phytochemically, and employed as novel green corrosion inhibitors of AB. The corrosion inhibition efficiency (IE%) was determined in an aqueous 0.5 M HCl solution by potentiodynamic polarization (Tafel plots) and electrochemical impedance spectroscopy, measuring current density and charge transfer resistance, respectively. In addition, surface characterization of AB was performed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy techniques. Chloroform alkaloid-rich extracts resulted in IE% of 57% at 50 ppm, attributed to the formation of a layer of organic compounds on the AB surface that hindered the dezincification process. The formulation of corrosion inhibitors from C. lechleri latex allows for the valorization of non-edible natural sources and the diversification of the offer of green corrosion inhibitors for the chemical treatment of heat exchangers.