Comparing adsorption properties of NH 4 Cl-modified activated carbon towards chlortetracycline antibiotic with those of commercial activated carbon

Adsorptive removal of acid blue dye 113 using three agricultural waste biomasses: The possibility of valorization by activation and carbonization - A comparative analysis

The presence of various organic and inorganic contaminants in wastewater leads to serious health effects on humans and ecosystems. Industrial effluents have been considered as noticeable sources of contaminating water streams. These effluents directly liberate the pollutants such as dye molecules and heavy metal ions into the environment. In the present study, three biowaste materials (groundnut shell powder, coconut coir powder and activated corn leaf carbon) were utilized and compared for the removal of acid blue dye 113 from aqueous solutions. The characterization study of newly prepared sorbent material (H3PO4-activated corn leaf carbon) and the other utilized sorbents was carried out by Scanning Electron Microscope (SEM) and Fourier Transform Infrared Spectrophotometer (FTIR), along with Energy Dispersive X-Ray (EDX) Analysis. The influence of experimental conditions such as pH, initial dye concentration, temperature, contact time, and sorbent dosage on the removal efficiency of the dye were appraised. The adsorption isotherm and kinetic result of acid blue dye 113 adsorption onto the sorbents best obeyed from Sips and pseudo-second-order kinetic model. Overall, the outcomes confirmed that the newly synthesized sorbent material (carbonized H3PO4-activated corn leaf) has superior adsorption capacity, rapid adsorption, and higher suitability for the removal of toxic dyes from the contaminated waters.

Use of Chrysosporium/carbon nanotubes for preconcentration of ultra-trace cadmium levels from various samples after extensive studies on its adsorption properties

Carbon nanotubes were used to immobilize Chrysosporium fungus for building an adequate adsorbent to be used as an desirable sorbent for preconcentration and measurement of cadmium ultra-trace levels in various samples. After characterization, the potential of Chrysosporium/carbon nanotubes for the sorption of Cd(II) ions was scrutinized by the aid of central composite design, and comprehensive studies of sorption equilibrium, kinetics and thermodynamic aspects were accomplished. Then, the composite was utilized for preconcentration of ultra-trace cadmium levels, by a mini-column packed with Chrysosporium/carbon nanotubes, before its determination with ICP-OES. The outcomes vouchsafed that (i) Chrysosporium/carbon nanotube has a high tendency for selective and rapid sorption of cadmium ion, at pH 6.1, and (ii) kinetic, equilibrium, and thermodynamic studies showed a high affinity of the Chrysosporium/carbon nanotubes for cadmium ion. Also, the outcomes displayed that cadmium can quantitatively be sorbed at a flow speed lesser than 7.0 mL/min and a 1.0 M HCl solution (3.0 mL) was sufficient to desorbe the analyte. Eventually, preconcentration and measurement of Cd(II) in different foods and waters were successfully accomplished with good accuracy, high precision (RSDs ≤5.65%), and low limit of detection (0.015 μg/L).

Leaf-like ionic covalent organic framework for the highly efficient and selective removal of non-steroidal anti-inflammatory drugs: Adsorption performance and mechanism insights

In recent years, ionic covalent organic frameworks (iCOFs) have become popular for the removal of contaminants from water. Herein, we employed 2-hydroxybenzene-1,3,5-tricarbaldehyde (TFP) and 1,3-diaminoguanidine monohydrochloride (Dg_Cl) to develop a novel leaf-like iCOF (TFP-Dg_Cl) for the highly efficient and selective removal of non-steroidal anti-inflammatory drugs (NSAIDs). The uniformly distributed adsorption sites, suitable pore sizes, and functional groups (hydroxyl groups, guanidinium groups, and aromatic groups) of the TFP-Dg_Cl endowed it with powerful and selective adsorption capacities for NSAIDs. Remarkably, the optimal leaf-like TFP-Dg_Cl demonstrated an excellent maximum adsorption capacity (1100.08 mg/g) for diclofenac sodium (DCF), to the best of our knowledge, the largest adsorption capacity ever achieved for DCF. Further testing under varying environmental conditions such as pH, different types of anions, and multi-component systems confirmed the practical suitability of the TFP-Dg_Cl. Moreover, the prepared TFP-Dg_Cl exhibited exceptional reusability and stability through six adsorption-desorption cycles. Finally, the adsorption mechanisms of NSAIDs on leaf-like TFP-Dg_Cl were confirmed as electrostatic interactions, hydrogen bonding, and π-π interactions. This work significantly supplements to our understanding of iCOFs and provides new insights into the removal of NSAIDs from wastewater.

Effective toluene removal from aqueous solutions using fast pyrolysis-derived activated carbon from agricultural and forest residues: Isotherms and kinetics study

In this study, the production and characterization of activated carbons (ACs) from agricultural and forest residue using physical activation are discussed. Biomass-based biochars produced during fast pyrolysis process is introduced as alternative precursors to produce AC and the integrated process for the co-production of porous adsorbent materials from biochar via the fast pyrolysis process is suggested. Moderate surface areas and good adsorption capacities were obtained from switchgrass (SWG) and pine tops (PT) based AC. The surface areas were 959 and 714 m²/g for SWG- and PT-based AC, respectively. The adsorption capacities using toluene as pollutant for two model systems of 180 and 300 ppm were measured and ranged between 441-711 and 432-716 mg/g for SWG-based and PT-based AC, respectively. The nitrogen adsorptive behavior, Lagergren pseudo-second-order kinetic (PSOK) model and kinetics isotherms studies describe a heterogeneous porous system, including a mesoporous fraction with the existence of a multilayer adsorption performance. The presence of micropores and mesopores in SWG- and PT-based AC suggests potential commercial applications for using pyrolytic biochars for AC production.

Amine-Functionalized Natural Rubber/Mesostructured Silica Nanocomposites for Adsorptive Removal of Clofibric Acid in Aqueous Phase

This study is the first report on the synthesis, characterization and application of amine-functionalized mesoporous nanocomposites based on natural rubber (NR) and wormhole-like mesostructured silica (WMS). In comparison with amine-functionalized WMS (WMS-NH₂), a series of NR/WMS-NH₂ composites were synthesized via an in situ sol-gel method in which the organo-amine group was grafted onto the nanocomposite surface via co-condensation with 3-aminopropyltrimethoxysilane (APS) as the amine-functional group precursor. The NR/WMS-NH₂ materials had a high specific surface area (115-492 m² g^-1) and total pore volume (0.14-1.34 cm³ g^-1) with uniform wormhole-like mesoporous frameworks. The amine concentration of NR/WMS-NH₂ (0.43-1.84 mmol g^-1) was increased with an increase in the APS concentration, corresponding to high levels of functionalization with the amine groups of 53-84%. The H₂O adsorption-desorption measurement revealed that NR/WMS-NH₂ possessed higher hydrophobicity than WMS-NH₂. The removal of clofibric acid (CFA), a xenobiotic metabolite of the lipid-lowering drug clofibrate, from the aqueous solution using WMS-NH₂ and NR/WMS-NH₂ materials was investigated using a batch adsorption experiment. The adsorption was a chemical process in which the pseudo-second order kinetic model expressed the sorption kinetic data better than the pseudo first-order and Ritchie-second kinetic order model. In addition, the CFA adsorption sorption equilibrium data of the NR/WMS-NH₂ materials were fitted to the Langmuir isotherm model. The NR/WMS-NH₂ with 5% amine loading had the highest CFA adsorption capacity (6.29 mg g^-1).

Adsorptive removal of antibiotic pollutants from wastewater using biomass/biochar-based adsorbents

This study explores adsorptive removal measures to shed light on current water treatment innovations for kinetic/isotherm models and their applications to antibiotic pollutants using a broad range of biomass-based adsorbents. The structure, classifications, sources, distribution, and different techniques for the remediation of antibiotics are discussed. Unlike previous studies, a wide range of adsorbents are covered and adsorption of comprehensive classes of antibiotics onto biomass/biochar-based adsorbents are categorized as β-lactam, fluoroquinolone, sulfonamide, tetracycline, macrolides, chloramphenicol, antiseptic additives, glycosamides, reductase inhibitors, and multiple antibiotic systems. This allows for an assessment of their performance and an understanding of current research breakthroughs in applying various adsorbent materials for antibiotic removal. Distinct from other studies in the field, the theoretical basis of different isotherm and kinetics models and the corresponding experimental insights into their applications to antibiotics are discussed extensively, thereby identifying the associated strengths, limitations, and efficacy of kinetics and isotherms for describing the performances of the adsorbents. In addition, we explore the regeneration of adsorbents and the potential applications of the adsorbents in engineering. Lastly, scholars will be able to grasp the present resources employed and the future necessities for antibiotic wastewater remediation.

Vinasse-based biochar magnetic composites: adsorptive removal of tetracycline in aqueous solutions

Highly efficient and cost-effective adsorbents for antibiotic removal are the key to mitigate pollution by industrial wastewaters. Pyrolyzing low-cost winemaking waste into biochar is a promising means for waste biomass utilization. This study assembled vinasse-derived biochar with manganese ferrite into vinasse-manganese ferrite biochar-magnetic composites (V-MFB-MCs) through simultaneous pyrolysis of waste biomass and metal (Mn and Fe) hydroxide precipitates. Batch experiments were conducted to evaluate the kinetics and isotherms of tetracycline (TC) adsorption as well as the influence of pH value, humic acid, and ionic strength. Morphological characterization showed that crystalline MnFe₂O₄ nanoparticles were impregnated within the framework of fabricated V-MFB-MCs. Superior TC adsorption capacity and fast pseudo-second-order kinetics could be achieved by the V-MFB-MCs-800 at pH 3.0. The TC adsorption onto V-MFB-MCs-800 was highly pH-dependent and controlled by the positive influence of ionic strength and humic acid. V-MFB-MCs-800 showed excellent adsorption performance in different natural water. Multiple interaction mechanisms including pore filling effect, π-π stacking interaction, and hydrogen bonding contribute to TC removal by V-MFB-MCs-800, which can be an innovative biowaste-derived material for industrial wastewater treatment.

Adsorption performance of Enterobacter cloacae towards U(VI) ion and application of Enterobacter cloacae/carbon nanotubes to preconcentration and determination of low-levels of U(VI) in water samples

Keeping the high potential of some microorganisms in adsorption of radionuclides in view, the adsorption properties of Enterobacter cloacae towards uranium were attentively scrutinized, and then it was used for preconcentration of uranium in different samples, using Enterobacter cloacae/carbon nanotube composite. First, using ultrasonic agitation, the effects of operational factors on biosorption of uranium on the inactive Enterobacter cloacae were appraised and modeled by central composite design, and a comprehensive study was performed on the equilibrium, kinetics, thermodynamic, and selectivity aspects of biosorption. The optimization studies along with the evaluations of the adsorption properties revealed that Enterobacter cloacae have a high affinity for fast and selective biosorption of uranium ions, at pH 5.1. Second, the Enterobacter cloacae/carbon nanotube was synthesized, characterized, and utilized for preconcentration of uranium in different samples, using a mini-column packed with the composite. The optimization of operational factors on recovery of uranium, using the central composite design, showed that uranium can be quantitively adsorbed at a sample flow rate lower than 4.5 mL min^-1 and the desorption could be accomplished with 3.0 mL HCl 0.6 M solution. Finally, the mini-column was exploited for preconcentration and determination of uranium in different samples. The results revealed the low detection limit (0.015 μg.L^-1), high precision (RSDs ≤3.92%), and good accuracy of the proposed procedure.

Adsorption and Removal of Antibiotic Pollutants using CuO-Co3 O4 Co-modified Porous Boron Nitride Fibers in Aqueous Solution

The presence of antibiotic contaminants in aqueous environment already poses significant risks to ecological sustainability, biodiversity and human public health and safety. Therefore, it is urgent to develop practical water pollution control technologies and new materials. Here, we prepared CuO-Co₃ O₄ co-modified porous boron nitride fibers (P-BNFs) for the adsorption and removal of tetracycline antibiotics (TCs) in aqueous environment. The prepared adsorbents were characterized by XRD, FTIR, XPS, SEM, TEM and BET, and the adsorption behavior was explored by batch experiments. The results show that the removal percentage for doxycycline (DC) reaches 98.68 %, which was much higher than that of P-BNFs, and the modification results of P-BNFs with CuO or Co₃ O₄ alone. After five regeneration cycles, the removal rate of DC by CuO-Co₃ O₄ /P-BNFs was still as high as 89.33 %. This is promising and indicates that the prepared CuO-Co₃ O₄ /P-BNFs adsorbent has good renewable recycling performance and practical application prospects.

Nanocomposites of zero-valent iron@biochar derived from agricultural wastes for adsorptive removal of tetracyclines

Tetracycline antibiotics as the emerging pollutants had been drawn abroad increasing concerns. An agricultural waste, the lignocellulosic hazelnut shell, was used as the carbon source to prepare the nanocomposites of zero-valent iron@biochar by pyrolytic reduction method at 1123 K for 2 h in N₂ atmosphere. The adsorptive removal of tetracycline, oxytetracycline and chlortetracycline by the zero-valent iron@biochar from aqueous solution was investigated by batch method. The optimal experimental conditions were found to be at pH 6-7 with a contact time of 40 min. The adsorbed amounts of oxytetracycline, chlortetracycline and tetracycline at 298 K were 52.7, 42.5 and 39.1 mg g^-1, respectively. Adsorption process of three antibiotics by the nanocomposite pursued Langmuir and pseudo-second-order equations. Thermodynamic parameters illustrated that the adsorption was spontaneous and endothermic intrinsically. The high removal efficiencies up to 95% of the zero-valent iron@biochar for oxytetracycline and chlortetracycline from the culture wastewaters had opened the potential applications for the removal of the antibiotics.

Preparation of ammonium-modified cassava waste-derived biochar and its evaluation for synergistic adsorption of ternary antibiotics from aqueous solution

Mono- and co-sorption of the three antibiotics i.e., norfloxacin (NOR), sulfamerazine (SMR) and oxytetracycline (OTC), to raw and NH₄⁺-modified cassava waste biochar added to aqueous solutions were investigated. The NH₄⁺-modified biochar showed higher sorption affinity for both NOR and SMR than the raw biochar, while the raw biochar showed higher sorption affinity for OTC than the modified biochar. The highest sorption to both biochars in both the mono- and competitive sorption systems was found for OTC followed by NOR and SMR. Sorption equilibrium in all systems analyzed was reached within 15 h. Electrostatic interactions among the ionic antibiotics in the multicomponent solution increased NOR and SMR sorption to both biochars. Antibiotics' mono- and co-sorption to biochars decreased with increasing solution pH. The co-sorption of NOR and SMR to the two biochars was regulated by π-π electron-donor-acceptor (EDA) interactions; besides, electrostatic interactions and Hydrogen (H-) bonding played an important part. Cation bridging might have been a potential mechanism to contribute to SMR sorption to the raw biochar, and OTC sorption to the NH₄⁺-modified biochar. These observations will improve our understanding of the simultaneous removal of multiple antibiotics from water or wastewater.

Modified Grape Seeds: A Promising Alternative for Nitrate Removal from Water

The aim of this work was to investigate grape seeds as a potential adsorbent for nitrate removal from water. Grape seeds were modified by quaternization and the applicability of the modified grape seeds (MGS) was evaluated in batch adsorption experiments. Fixed bed adsorption and regeneration studies were carried out to determine the regeneration capacity of MGS. The maximum adsorption capacity of 25.626 mg g⁻¹ at native pH (6.3) for nitrate removal by MSG was comparable to that of the commercial anion exchange resin Relite A490 under similar conditions. The percent removal of nitrate from model nitrate solution was 86.47% and 93.25% for MGS, and Relite A490, respectively, and in synthetic wastewater 57.54% and 78.37%. Analysis of the batch adsorption data using isotherm models revealed that the Freundlich model provided a better fit to the data obtained than the Langmuir model, indicating multilayer adsorption. In kinetic terms, the results showed that the adsorption followed the pseudo-first order model. By investigating the adsorption mechanism, the results suggest that the intraparticle diffusion model was not the only process controlling the adsorption of nitrate on MGS. In column experiments (adsorption/desorption studies), three adsorption cycles were tested with minimal decrease in adsorption capacities, implying that this alternative adsorbent can be successfully regenerated and reused.

Toxicity and remediation of pharmaceuticals and pesticides using metal oxides and carbon nanomaterials

The worldwide development of agriculture and industry has resulted in contamination of water bodies by pharmaceuticals, pesticides and other xenobiotics. Even at trace levels of few micrograms per liter in waters, these contaminants induce public health and environmental issues, thus calling for efficient removal methods such as adsorption. Recent adsorption techniques for wastewater treatment involve metal oxide compounds, e.g. Fe2O3, ZnO, Al2O3 and ZnO-MgO, and carbon-based materials such as graphene oxide, activated carbon, carbon nanotubes, and carbon/graphene quantum dots. Here, the small size of metal oxides and the presence various functional groups has allowed higher adsorption efficiencies. Moreover, carbon-based adsorbents exhibit unique properties such as high surface area, high porosity, easy functionalization, low price, and high surface reactivity. Here we review the cytotoxic effects of pharmaceutical drugs and pesticides in terms of human risk and ecotoxicology. We also present remediation techniques involving adsorption on metal oxides and carbon-based materials.

Oxytetracycline Adsorption from Aqueous Solutions on Commercial and High-Temperature Modified Activated Carbons

The aim of the work was to evaluate the possibility of using commercial and modified activated carbons for the removal of oxytetracycline from aqueous solutions. The kinetics and statics of adsorption as well as the effect of the activated carbon dose and solution pH on the efficiency of the oxytetracycline adsorption were analyzed. Based on the study of oxytetracycline adsorption isotherms, the activated carbons were ranked in the following order: F-300 > WG-12 > Picabiol > ROW08 > WACC 8 × 30 > F-100 > WAZ 0.6–2.4. The most effective activated carbons were characterized by large specific surfaces. The best matching results were obtained for: Redlich–Peterson, Thot and Jovanovic models, and lower for the most frequently used Freundlich and Langmuir models. The adsorption proceeded better from solutions with pH = 6 than with pH = 3 and 10. Two ways of modifying activated carbon were also assessed. A proprietary method of activated carbon modification was proposed. It uses the heating of activated carbon as a result of current flow through its bed. Both carbons modified at 400 °C in the rotary kiln and on the proprietary SEOW (Joule-heat) modification stand enabled to obtain adsorbents with higher and comparable monolayer capacities. The advantage of the proposed modification method is low electricity consumption.

Fate of antibiotics during membrane separation followed by physical-chemical treatment processes

Membrane separation technology has been widely utilised to obtain clean permeate and concentrated nutrients from biogas digested slurry. However, some antibiotics are frequently found in digested slurry. Antibiotic removal during the steps, including paper filtration (PF), hollow-fibre membrane ultrafiltration (HF), nanofiltration (NF) and reverse osmosis (RO), of combined membrane separation processing (CMP) remain poorly understood. Experiments were performed on a pilot-scale CMP plant to investigate antibiotic transport and rejection efficiencies in CMP products and analyse the antibiotic removal performances of additional treatments. Results showed average relative antibiotic rejection efficiencies of 50%, 83%, 28% and 14% for PF, HF, NF and RO during CMP, respectively. Each CMP product needed additional treatment for antibiotic removal. Antibiotic removal capacity followed the order of fine halloysite > P25 > activated charcoal > coarse halloysite. The average antibiotic removal rates for different CMP products ranged from 73.3% to 99.9%. But antibiotics can only be adsorbed by fine halloysite and must be degraded through other treatments, Thus, P25 has considerable practical importance for the removal of antibiotics, as antibiotics can be degraded during photocatalysis.

Synthesis and characterization of an NH4CL-induced Eskanbil activated carbon (EAC) for the removal of penicillin G from contaminated water

Penicillin G (PG) is one of the most widely used antibiotics around the world. The release of PG in an aqueous solution leads to contamination of water resources. This study aimed to determine the efficiency of modified Eskanbil activated carbon for the removal of PG from aqueous solutions. The NH4Cl-induced activated carbon was synthesized by a simple method and used for the degradation of PG in contaminated water. Activated carbon was characterized by Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM), and Brunauer-Emmett-Teller (BET) surface area analysis. The four main reaction parameters optimized in this study were pH, time, the concentration of the EAC (Eskanbil Activated Carbon), and initial PG concentration. The synthesized carbon was characterized and the results showed it as a mesoporous material with the BET specific surface area of 1473 m²/g and pore volume of 0.81 cm³/g. The maximum PG adsorption onto EAC was observed at the pH of 6. The PG removal of 33% at an EAC concentration of 0.1 g/L increased to 99.98% at an activated carbon concentration of 0.5 g/L. The isotherm and kinetic studies of PG removal by EAC showed that the Freundlich model (R² > 0.995) and the pseudo-second-order (R² > 0.983) equation represented the best fit with the adsorption data. EAC is recommended as a suitable and cost-efficient adsorbent for removing poisons, pharmaceuticals, and other emerging contaminants from water resources.

Ultrasound wave assisted removal of Ceftriaxone sodium in aqueous media with novel nano composite g-C3N4/MWCNT/Bi2WO6 based on CCD-RSM model

The aim of this study was ultrasound assisted removal of Ceftriaxone sodium (CS) based on CCD model. Using sonochemical synthesized Bi₂WO₆ implanted on graphitic carbon nitride/Multiwall carbon nanotube (g-C₃N₄/MWCNT/Bi₂WO₆). For this purpose g-C₃N₄/MWCNT/Bi₂WO₆ was synthesized and characterized using diverse approaches including XRD, FE-SEM, XPS, EDS, HRTEM, FT-IR. Then, the contribution of conventional variables including pH, CS concentration, adsorbent dosage and ultrasound contact time were studied by central composite design (CCD) under response surface methodology (RSM). ANOVA was employed to the variable factors, and the most desirable operational conditions mass provided. Drug adsorption yield of 98.85% obtained under these defined conditions. Through conducting five experiments, the proper prediction of the optimum point were examined. The respective results showed that RSD% was lower than 5% while the t-test confirmed the high quality of fitting. Langmuir isotherm equation fits the experimental data best and the removal followed pseudo-second order kinetics. The estimation of the experimentally obtained maximum adsorption capacities was 19.57 mg.g^- of g-C₃N₄/MWCNT/Bi₂WO₆ for CS. Boundary layer diffusion explained the mechanism of removal via intraparticle diffusion.

Nanocomposites of zero-valent Iron@Activated carbon derived from corn stalk for adsorptive removal of tetracycline antibiotics

The hybrid nanocomposites of zero-valent iron loaded the activated carbon derived from the corn stalk (ZVI@ACCS) was prepared and used to remove the antibiotics of tetracycline (TC), oxytetracycline (OTC) and chlortetracycline (CTC) from aqueous solution. The adsorption amounts of three antibiotics (103.1 mg g^-1 for CTC, 72.9 mg g^-1 for OTC and 81.5 mg g^-1 for TC) were sensitive to the temperature and independent of pH in the range of 4.2-7.1 at 298 K through the synergistic interactions of the electrostatic attraction, the bridging complexation and the surface complexation. The equilibrium was performed within 20 min at 298 K. The spontaneous (ΔG^o<0) and endothermic (ΔH^o>0) adsorption of three antibiotics onto the ZVI@ACCS nanocomposites gave a better matching (r² > 0.99) with Langmuir and pseudo-second-order models.

Biochar from Fique Bagasse for Remotion of Caffeine and Diclofenac from Aqueous Solution

Caffeine and diclofenac are molecules with high human intake, and both belong to the ‘emergent’ class of contaminants. These compounds have been found at different concentrations in many sources of water worldwide and have several negative impacts on aquatic life systems; that is why the search for new alternatives for their removal from aqueous media is of transcendental importance. In this sense, adsorption processes are an option to attack this problem and for this reason, biochar could be a good alternative. In this regard, were prepared six different biochar from fique bagasse (FB), a useless agroindustry by-product from fique processing. The six biochar preparations were characterized through several physicochemical procedures, while for the adsorption processes, pH, adsorption time and concentration of caffeine and diclofenac were evaluated. Results showed that the biochar obtained by pyrolysis at 850 °C and residence time of 3 h, labeled as FB850-3, was the material with the highest adsorbent capacity with values of 40.2 mg g⁻¹ and 5.40 mg g⁻¹ for caffeine and diclofenac, respectively. It was also shown that the experimental data from FB850-3 fitted very well the Redlich–Peterson isotherm model and followed a pseudo-first and pseudo-second-order kinetic for caffeine and diclofenac, respectively.

Adsorption of chlortetracycline from aquaculture wastewater using modified zeolites

In this study, lanthanum modified zeolite (La-Z) was used to adsorb chlortetracycline (CTC) from aquaculture wastewater. La-Z was characterized by SEM, TEM, EDS, XRD, FTIR and BET. The effects various factors on the adsorption of CTC by La-Z were investigated, including the lanthanum modification concentration on zeolites, the dosage of La-Z, solution pH and reaction time. Orthogonal experiments were performed to determine the optimal adsorption conditions. Adsorption kinetics were studied by quasi-first-order model, quasi-second-order model, Weber-Morris, Boyd and Bangham models, while isotherms were analyzed by the Langmuir and Freundlich models. The removal rate reached 98.4%, when the modified concentration was 0.02 mol/L, the adsorbent dosage was 0.04 g, the initial concentration of CTC was 5 mg/L, the adsorption time was 20 min, and the pH was 7. The initial CTC concentration had the greatest influence on the adsorption process. The kinetic results showed a significant linear correlation between the experimental results and the quasi-second-order kinetic model. From the results of the internal diffusion model, it was found that the La-Z adsorption rate was controlled by both internal diffusion and external diffusion, in a multi-step process. The adsorption isotherm conforms to the Langmuir model, with the maximum adsorption quantity reaching 127.55 mg/g. Thermodynamic analysis showed that the adsorption process was an endothermic process of entropy increase, which occurs spontaneously.

A novel route for preparation of chemically activated carbon from pistachio wood for highly efficient Pb(II) sorption

Pistachio wood-derived activated carbon prepared by a two-stage process (PWAC-2), conducting two consecutive chemical activation processes with NH₄NO₃ and NaOH, respectively. The results showed that explosive characteristic of NH₄NO₃ can primarily be employed to produce a char, with a large surface area and a highly-ordered pore structure, which can be subjected to a second activation process with NaOH to prepare a more suitable activated carbon, with a highly porous structure and useful functional groups, for removal of lead ions from aqueous media. An L₂₅ Taguchi experimental design was used by varying impregnation ratio, activation time and temperature in both pre- and post-activation stages, and the results showed that, in both stages, a small activating agent/precursor and a proportional low activation time suffice for preparation of an advantageous activated carbon for Pb(II) adsorption. A comprehensive study was performed on the equilibrium, kinetic and thermodynamic aspects of Pb(II) adsorption by the new activated carbon. The results exhibited that, having had a high lead adsorption capacity (190.2 mg g^-1), a high adsorption rapidness, and thermodynamic favorability, PWAC-2 is a beneficial alternative for utilization in full-scale plants of lead removal from waters and wastewaters.

Adsorption of chlortetracycline onto biochar derived from corn cob and sugarcane bagasse

Biochar was prepared from two different types of biological waste materials, corn cob (CC) and sugarcane bagasse (SB). The adsorption capacity of each class of adsorbent was determined by chlortetracycline (CTC) adsorption tests. The adsorption kinetics and isotherms of chlortetracycline onto sugarcane bagasse biochar (SBB) and corn cob biochar (CCB) were studied. Experimental results indicated that pseudo-second-order adsorption kinetics of CTC onto SBB and CCB were more reasonable than pseudo-first-order kinetics, and the adsorption kinetic model of CTC onto SBB was slightly better than that onto CCB. The maximum adsorption capacity of CTC onto SBB was 16.96 mg/g at pH 4, while the highest adsorption efficiency of CTC onto CCB was achieved at pH 5 with a maximum adsorption of 12.39 mg/g. The Freundlich isotherm model was better than the Langmuir model at illustrating the adsorption process of CTC onto SBB and CCB. These results provide a way to understand the value of specific biochars, which can be used as efficient and effective adsorbents for CTC removal from waste-water. Compared with raw pinewood, SBB and CBB were considered as alternative materials to remove antibiotics from aqueous environments.

Study of ciprofloxacin removal by biochar obtained from used tea leaves

In this study, used tea leaves (UTLs) were pyrolyzed to obtain used tea-leaf biochar (UTC), and then the UTC was used as an adsorbent to remove ciprofloxacin (CIP) from aqueous solutions. Batch experiments were conducted to investigate the CIP adsorption performance and mechanism. The results showed that the CIP-adsorbing ability first increased and then declined as the UTC pyrolysis temperature increased. The UTC obtained at 450°C presented excellent CIP-absorbing ability at pH6 and 40°C. The maximum monolayer adsorption capacity was 238.10mg/g based on the Langmuir isotherm model. The pseudo-second-order kinetic equation agreed well with the CIP adsorption process, which was controlled by both external boundary layer diffusion and intra-particle diffusion. The characterization analysis revealed that the OH groups, CC bonds of aromatic rings, CH groups in aromatic rings and phenolic CO bonds play vital roles in the CIP adsorption process, and that the NC, NO, OCO and COH groups of UTC were consumed in large quantities. π-π interactions, hydrogen bonding and electrostatic attraction are inferred as the main adsorption mechanisms. The present work provides not only a feasible and promising approach for UTLs utilization but also a potential adsorbent material for removing high concentrations of CIP from aqueous solutions.

Efficient mercury removal from wastewater by pistachio wood wastes-derived activated carbon prepared by chemical activation using a novel activating agent

Ammonium nitrate (NH₄NO₃) with explosive characteristics at high temperatures was used as a novel activating reagent to prepare a surface-engineered activated carbon derived from pistachio wood wastes (PWAC). PWAC was characterized and compared with commercial activated carbon (CAC) by textural and morphological properties, surface chemistry, crystal structure, and surface elemental composition. The results indicated that the optimal conditions of PWAC preparation to obtain the highest mercury adsorption capacity were pyrolysis temperature (800 °C), pyrolysis time (2 h), and impregnation ratio (5%). PWAC was of highly regular-shaped and well-developed pores and possessed a large surface area (1448 m²/g) and high total pore volume (0.901 cm³/g). The batch experiments indicated that the adsorption process of Hg(II) was strongly dependent on the solution pH and reached fast equilibrium at approximately 30 min. PWAC (202 mg/g) exhibited a significantly higher maximum adsorption capacity than commercial activated carbon (66.5 mg/g). Adsorbent-adsorbate dispersion interaction plays a major role in the adsorption mechanism, compared to the minor role played by pore filling and reduction mechanism. Overall, ammonium nitrate can be considered a newer activating reagent to prepare promising and low-cost PWAC for effectively Hg(II) removal from water media.