Physicochemical properties and fungicidal activity of inclusion complexes of fungicide chlorothalonil with β-cyclodextrin and hydroxypropyl-β-cyclodextrin

Supramolecular interaction of ketoprofen with native and hydroxypropyl beta-cyclodextrin: Improved solubility and anti-inflammatory

Ketoprofen (KTP), an active pharmaceutical ingredient with poor solubility in water and other aqueous solvents, has gained attention for its improved solubility and quicker therapeutic effects when combined with cyclodextrin (CD). This study thoroughly examines how varying concentrations of CD affect KTP, leading to notable increases in absorbance and fluorescence intensity. The binding constant for the 1:1 complex is determined from these changes. Ultrasonication enabled the successful formation of inclusion complexes (ICs) of KTP with β-cyclodextrin (βCD) and hydroxypropyl-β-cyclodextrin (HβCD), referred to as KTP:βCD IC and KTP:HβCD IC, respectively. Significant differences in chemical shift values and surface morphology are observed for the ICs compared to their uncomplexed form. The thermal stability of KTP is markedly improved when combined with CDs. The HOMO-LUMO relationship stabilizes the complex through favorable interactions and electron transfer action within the ICs. Additionally, protein denaturation assays showed significant enhancements in the anti-inflammatory and anti-arthritic activities of KTP in its IC form compared to KTP alone. Thus, due to their enhanced solubility and complexation properties, the ICs of KTP show promising potential as drug materials for solid dosage forms.

Environmentally Friendly Sustained-Release Antifungal Cyclodextrin Inclusion Complex Nanofibers for Controlling Fungi

The development of hydrophobic pesticide formulations remains constrained by complicated manufacturing processes, excessive reliance on organic solvents, and indispensable surfactants. The practical application of dimethomorph (DIM) is hindered by its hydrophobic nature, posing risks to nontarget organisms. Inspired by the uptake of nanomaterials by plants, DIM was encapsulated in the cyclodextrin (CD) cavity to optimize its water-solubility and the sustained-release rate. The spatial confinement effect of CD could facilitate the thermostability of DIM. DIM/CD inclusion complex solutions were electrospun to fabricate nanofibers with bead-free and smooth morphology. As predicted, the release of DIM/CD inclusion complex nanofibers reached plateaus with accumulative release values of approximately 75%. The antifungal activity of DIM/CD inclusion complex nanofibers possesses much higher than DIM for controlling Rhizoctonia solani and Haematonectria hematococco, thereby enhancing its antifungal bioactivity and reducing pesticide spraying frequency. The inhibition rates of Rhizoctonia solani by DIM/HPβCD and DIM/HPγCD inclusion complex nanofibers are found to be 55.8% and 53.6% within 144 h, respectively. This work explores the feasibility of inclusion of complex nanofibers as a delivery platform for application in sustained agriculture production.

Environmentally Friendly UV Absorbers: Synthetic Characterization and Biosecurity Studies of the Host-Guest Supramolecular Complex

Isoamyl 4-methoxycinnamate (IMC) is widely used in various fields because of its exceptional UV-filter properties. However, due to its cytotoxicity and anti-microbial degradability, the potential eco-environmental toxicity of IMC has become a focus of attention. In this study, we propose a host-guest supramolecule approach to enhance the functionality of IMC, resulting in a more environmentally friendly and high-performance materials. Sulfobutyl-β-cyclodextrin sodium salt (SBE-β-CD) was used as the host molecule. IMC-SBE-β-CD supramolecular substances were prepared through the "saturated solution method", and their properties and biosecurity were evaluated. Meanwhile, we conducted the AOS tree evaluation system that surpasses existing evaluation approaches based on apoptosis, oxidative stress system, and signaling pathways to investigate the toxicological mechanisms of IMC-SBE-β-CD within human hepatoma SMMC-7721 cells as model organisms. The AOS tree evaluation system aims to offer the comprehensive analysis of the cytotoxic effects of IMC-SBE-β-CD. Our findings showed that IMC-SBE-β-CD had an encapsulation rate of 84.45% and optimal stability at 30 °C. Further, IMC-SBE-β-CD promoted cell growth and reproduction without compromising the integrity of mitochondria and nucleus or disrupting oxidative stress and apoptosis-related pathways. Compared to IMC, IMC-SBE-β-CD is biologically safe and has improved water solubility with the UV absorption property maintained. Our study provides the foundation for the encapsulation of hydrophobic, low-toxicity organic compounds using cyclodextrins and offers valuable insights for future research in this field.

Direct electrospinning for producing multiple activity nanofibers consisting of aggregated luteolin/hydroxypropyl-gamma-cyclodextrin inclusion complex

Hydroxypropyl-gamma-cyclodextrin (HPγCD) inclusion complex nanofibers (Lut/HPγCD-IC-NF) containing Luteolin (Lut) were prepared by electrospinning technology. Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) spectra confirmed the formation of Lut/HPγCD-IC-NF. Scanning electron microscopy (SEM) images showed that the morphology of Lut/HPγCD-IC-NF was uniform and bead-free, suggesting that self-assembled aggregates, macromolecules with higher molecular weights, were formed by strong hydrogen bonding interactions between the cyclodextrin inclusion complexes. Confocal laser scanning microscopy (CLSM) images showed that Lut was distributed in Lut/HPγCD-IC-NF. Proton nuclear magnetic resonance (1H NMR) spectroscopy revealed the change in chemical shift of the proton peak between Lut and HPγCD, confirming the formation of inclusion complex. Thermogravimetric analysis (TGA) proved that Lut/HPγCD-IC-NF had good thermal stability. The phase solubility test confirmed that HPγCD had a solubilizing effect on Lut. When the solubility of HPγCD reached 10 mM, the solubility of Lut increased by 15-fold. The drug loading test showed that the content of Lut in fibers reached 8.57 ± 0.02 %. The rapid dissolution experiment showed that Lut/HPγCD-IC-NF dissolved within 3 s. The molecular simulation provides three-dimensional evidence for the formation of inclusion complexes between Lut and HPγCD. Antibacterial experiments showed that Lut/HPγCD-IC-NF had enhanced antibacterial activity against S. aureus. Lut/HPγCD-IC-NF exhibited excellent antioxidant properties with a free radical scavenging ability of 89.5 ± 1.1 %. In vitro release experiments showed Lut/HPγCD-IC-NF had a higher release amount of Lut. In conclusion, Lut/HPγCD-IC-NF improved the physicochemical properties and bioavailability of Lut, providing potential applications of Lut in the pharmaceutical field.

Adenosine Encapsulation and Characterization through Layer-by-Layer Assembly of Hydroxypropyl-β-Cyclodextrin and Whey Protein Isolate as Wall Materials

Adenosine, as a water-soluble active substance, has various pharmacological effects. This study proposes a layer-by-layer assembly method of composite wall materials, using hydroxypropyl-β-cyclodextrin as the inner wall and whey protein isolate as the outer wall, to encapsulate adenosine within the core material, aiming to enhance adenosine microcapsules' stability through intermolecular interactions. By combining isothermal titration calorimetry with molecular modeling analysis, it was determined that the core material and the inner wall and the inner wall and the outer wall interact through intermolecular forces. Adenosine and hydroxypropyl-β-cyclodextrin form an optimal 1:1 complex through hydrophobic interactions, while hydroxypropyl-β-cyclodextrin and whey protein isolate interact through hydrogen bonds. The embedding rate of AD/Hp-β-CD/WPI microcapsules was 36.80%, and the 24 h retention rate under the release behavior test was 76.09%. The method of preparing adenosine microcapsules using composite wall materials is environmentally friendly and shows broad application prospects in storage and delivery systems with sustained release properties.

Development of venetoclax with 2-hydroxypropyl-beta-cyclodextrin inclusion complex for improved bioavailability

Cyclodextrin complexes loaded with venetoclax for improved solubility and therapeutic efficacy as repurposed drug. The venetoclax-cyclodextrin inclusion complex was prepared using kneading method. Primarily in-silico molecular docking study was performed to examine the possible interaction between venetoclax and hydroxypropyl-β-cyclodextrin (HP-β-CD) and extensively characterized. The in-vitro studies were performed using A-549 lung epithelial cancer cells. The in-vivo pharmaco-kinetic studies was performed on wistar rats. The aqueous solubility of venetoclax was increased upto 3.16 folds, as compared with pure venetoclax with entrapment efficiency (EE%) was determined 95.44 ± 0.3%. In-vitro cytotoxicity studies were carried on A-549 lung epithelial cancer cells, wherein BCL-2 receptors were highly over-expressed and IC 50 values for venetoclax and venetoclax- HP-β-CD complex was calculated at 24 and 48 hrs in the order of 1.241 µg/ml, 0.68 µg/ml and 0.757719 µg/ml, 0.6125 µg/mL, respectively. The oral bioavailability was increased 4.03 times compared to the pure drug. The venetoclax-HP-β-CD inclusion complexes showed the increased aqueous solubility with improved anticancer activities.Communicated by Ramaswamy H. Sarma.

Impact of carrier hydrophilicity on solid self nano-emulsifying drug delivery system and self nano-emulsifying granule system

The purpose of this study was to investigate the impact of carrier hydrophilicity on solid self nano-emulsifying drug delivery system (SNEDDS) and self nano-emulsifying granule system (SEGS). The mesoporous calcium silicate (Ca-silicate) and hydroxypropyl-β-cyclodextrin (HP-β-CD) were utilised as hydrophobic carrier and hydrophilic carrier, respectively. The liquid SNEDDS formulation, composed of Tween80/Kollipohr EL/corn oil (35/50/15%) with 31% (w/w) dexibuprofen, was spray-dried and fluid-bed granulated together with Avicel using Ca-silicate or HP- β-CD as a solid carrier, producing four different solid SNEDDS and SEGS formulations. Unlike the Ca-silicate-based systems, spherical shape and aggregated particles were shown in HP-β-CD-based solid SNEDDS and SEGS, respectively. Molecular interaction was detected between Ca-silicate and the drug; though, none was shown between HP-β-CD and the drug. Each system prepared with either carrier gave no significant differences in micromeritic properties, crystallinity, droplet morphology, size, dissolution and oral bioavailability in rats. However, the HP-β-CD-based system more significantly improved the drug solubility than did the Ca-silicate-based system. Therefore, both carriers hardly affected the properties of both solid SNEDDS and SEGS; though, there were differences in the aspect of appearance, molecular interaction and solubility.

Herbicide and Cytogenotoxic Activity of Inclusion Complexes of Psidium gaudichaudianum Leaf Essential Oil and β-Caryophyllene on 2-Hydroxypropyl-β-cyclodextrin

The present investigation aimed to develop inclusion complexes (ICs) from Psidium gaudichaudianum (GAU) essential oil (EO) and its major compound β-caryophyllene (β-CAR), and to evaluate their herbicidal (against Lolium multiflorum and Bidens pilosa) and cytogenotoxic (on Lactuca sativa) activities. The ICs were obtained using 2-hydroxypropyl-β-cyclodextrin (HPβCD) and they were prepared to avoid or reduce the volatility and degradation of GAU EO and β-CAR. The ICs obtained showed a complexation efficiency of 91.5 and 83.9% for GAU EO and β-CAR, respectively. The IC of GAU EO at a concentration of 3000 µg mL-1 displayed a significant effect against weed species B. pilosa and L. multiflorum. However, the β-CAR IC at a concentration of 3000 µg mL-1 was effective only on L. multiflorum. In addition, the cytogenotoxic activity evaluation revealed that there was a reduction in the mitotic index and an increase in chromosomal abnormalities. The produced ICs were able to protect the EO and β-CAR from volatility and degradation, with a high thermal stability, and they also enabled the solubilization of the EO and β-CAR in water without the addition of an organic solvent. Therefore, it is possible to indicate the obtained products as potential candidates for commercial exploration since the ICs allow the complexed EO to exhibit a more stable chemical constitution than pure EO under storage conditions.

Guest Binding with Sulfated Cyclodextrins: Does the Size of Cavity Matter?

Sulfated cyclodextrins have recently emerged as potential candidates for producing host-induced guest aggregation with properties better than p-sulfonatocalixarenes that have previously shown numerous applications involving the phenomena of host-induced guest aggregation. In the class of sulfated cyclodextrins (SCD), sulfated β-cyclodextrin (β-SCD) remains the most extensively investigated host molecule. Although it is assumed that the host-induced guest aggregation is predominantly an outcome of interaction of the guest molecule with the charges on the exterior of SCD cavity, it has not been deciphered whether the variation in the cavity size will make a difference in the efficiency of host-induced guest-aggregation process. In this investigation, we present a systematic study of host-induced guest aggregation of a cationic molecular rotor dye, Thioflavin T (ThT) with three different sulfated cyclodextrin molecules, α-SCD, β-SCD and γ-SCD, which differ in their cavity size, using steady-state emission, ground-state absorption and time-resolved emission measurements. The obtained photophysical properties of ThT, upon interaction with different SCD molecules, indicate that the binding strength of ThT with different SCD molecules correlate with the cavity size of the host molecule, giving rise to the strongest complexation of ThT with the largest host molecule (γ-SCD). The binding affinity of ThT towards different host molecules has been supported by molecular docking calculations. The results obtained are further supported with the temperature and ionic strength dependent studies performed on the host-guest complex. Our results indicate that for host-induced guest aggregation, involving oppositely charged molecules, the size of the cavity also plays a crucial role beside the charge density on the exterior of host cavity.

Development of pediatric orally disintegrating mini-tablets containing atomoxetine hydrochloride-β-cyclodextrin inclusion complex using experimental design

OBJECTIVE

The aim of the study was to develop and evaluate characteristics of orally disintegrating mini-tablet (ODMT) formulations including atomoxetine hydrochloride (ATO)/β-cyclodextrin (β-CD) inclusion complex for pediatric therapy of attention deficit and hyperactivity disorder (ADHD).

METHODS

Design of experiment approach was used to develop ODMTs. The ODMTs were compressed using direct compression method with two different superdisintegrants (Parteck ODT^® and Ac-Di-Sol^®) and characterized with quality control tests. In vitro dissolution and taste studies were performed.

RESULTS

The hardness and friability values of the optimized three ODMT formulations were determined as 41.7 N, 42.4 N, and 40.8 N and 0.32%, 0.29%, and 0.42%, respectively. The disintegration time of all the optimized formulations was found to be less than one minute. In addition, dissolution profiles of ATO from optimized ODMTs were determined in four different dissolution media (distilled water, pH 1.2, 6.8, and 7.4) and it was determined that the maximum dissolved ATO amount reached at the end of 20 min.

CONCLUSION

As a conclusion, the novel formulation of ODMTs with ATO/β-CD inclusion complex was successfully developed for pediatric use.

Alginate hydrogel with enhanced curcumin release through HPβCD assisted host-guest interaction

The underprivileged pharmacodynamic action of curcumin, which arose from its low water solubility and rapid metabolism, restricts its therapeutic performance. In this study, (2-Hydroxy isopropyl)-β-cyclodextrin (HPβCD) as a macrocycle host molecule was employed to enhance the availability and control release of curcumin by forming a host-guest inclusion complex within an in-situ forming alginate hydrogel. The formation of the inclusion complexes of curcumin with a single host molecule was characterized by FTIR, XRD, TGA, SEM, and DLS analyses. The inclusion complex of curcumin and HPβCD (HPβCD-Cur) showed a high encapsulation efficiency of 88.2 %. According to DLS results, aqueous dispersion of HPβCD-Cur exhibited a unimodal histogram after 2 and 7 days with average particles size of 207.5 and 230.6 nm, respectively. This observation could be because of the formation of an inclusion complex that effectively distributed in solution and prevented curcumin agglomeration. The prepared alginate hydrogel containing HPβCD-Cur demonstrated >87 % reduction in colonies of methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa, which significantly is higher than that for Alg/Cur (<69 %). The Alg/HPβCD-Cur hydrogel exhibited a high water uptake of 470 % after 2 h, and a curcumin cumulative release of 80 % over 72 h, with proper cytocompatibility. Consequently, it was shown that the HPβCD carrier could act as an apt host molecule that can properly encapsulate curcumin and enhance its release from the Alg/HPβCD-Cur hydrogel.

Development of inclusion complexes of 2-hydroxypropyl-β-cyclodextrin with Psidium guajava L. essential oil by freeze-drying and kneading methods for application as Aedes aegypti L. larvicide

Inclusion complexes (ICs) of 2-hydroxypropyl-β-cyclodextrin with the essential oil (EO) from Seculo XXI cultivar of Psidium guajava were prepared using kneading (KN) and freeze-drying (FD) methods. The resulting ICs clusters have a nanometric size, with a diameter of approximately 80 and 40 nm for KN and FD, respectively. Complexation efficiency was 80.3% and 50.8% for KN and FD methods, respectively. The larvicidal activity of the EO in DMSO on A. aegypti had LC₅₀ and LC₉₀ values of 51.49 and 64.51 µg mL^-1, respectively. For the KN method, the toxicity corresponded to 77.54 and 107.29 µg mL^-1 for LC₅₀ and LC₉₀, respectively. FD method demonstrated toxicity at concentrations above 600 µg mL^-1. Thus, ICs enable the use of EO in breeding sites for A. aegypti, thus being potential products to be commercially exploited.

Preparation, Optimization, and Characterization of Inclusion Complexes of Cinnamomum longepaniculatum Essential Oil in β-Cyclodextrin

Cinnamomum longepaniculatum essential oil (CLEO) possesses antibacterial, anti-inflammatory, and antioxidant activities. However, CLEO shows volatilization and poor solubility, which limits its application field. In this research, inclusion complexes of β-cyclodextrin (β-CD) with CLEO were produced, and its physicochemical properties were characterized. Response surface methodology was used to obtain optimum preparation conditions. A statistical model was generated to define the interactions among the selected variables. Results show that the optimal conditions were an H2O/β-CD ratio of 9.6:1 and a β-CD/CLEO ratio of 8:1, with the stirring temperature of 20 °C for the maximal encapsulation efficiency values. The physicochemical properties of CLEO/β-CD inclusion complexes (CLEO/β-CD-IC) were investigated. Fourier transform infrared spectroscopy showed that correlative characteristic bands of CLEO disappeared in the inclusion complex. X-ray diffraction presented different sharp peaks at the diffraction angle of CLEO/β-CD-IC. The thermogravimetric analysis demonstrated the thermal stability of CLEO was enhanced after encapsulation. Tiny aggregates with a smaller size of CLEO/β-CD-IC particles were observed by scanning electron microscopy. The comparison of β-CD, CLEO, and physical mixtures with CLEO/β-CD-IC confirmed the formation of inclusion complexes.

Fabrication and Characterization of Antifungal Hydroxypropyl-β-Cyclodextrin/Pyrimethanil Inclusion Compound Nanofibers Based on Electrospinning

Pyrimethanil (PMT) is an anilinopyrimidine bactericide with poor water solubility, which limits its applications. To improve the physical and chemical properties of PMT, hydroxypropyl-β-cyclodextrin/pyrimethanil inclusion compound nanofibers (HPβCD/PMT-IC-NFs) were fabricated via electrospinning. A variety of analytical techniques were used to confirm the formation of the inclusion compound. Scanning electron microscopy image displayed that HPβCD/PMT-IC-NF was homogeneous without particles. Thermogravimetric analysis indicated that the formation of the inclusion compound improved the thermostability of PMT. In addition, the phase solubility test illustrated that the inclusion compound formed by PMT and HPβCD had a stronger water solubility. The antifungal effect test exhibited that HPβCD/PMT-IC-NF had better antifungal properties. The release experiment confirmed that HPβCD/PMT-IC-NF had a sustained-release effect, and the release curve conformed to the first-order kinetic model equation. In short, the fabrication HPβCD/PMT-IC-NF inhibited improved solubility and thermostability of PMT, thus promoting the development of pesticide dosage form to water-based and low-pollution direction.

Enhancement of Dissolving Capacity and Reducing Gastric Mucosa Irritation by Complex Formation of Resibufogenin with β-Cyclodextrin or 2-Hydroxypropyl-β-cyclodextrin

Resibufogenin (RBG) is a natural medicinal ingredient with promising cardiac protection and antitumor activity. However, poor solubility and severe gastric mucosa irritation restrict its application in the pharmaceutical field. In this study, the inclusion complex of RBG with β-cyclodextrin (β-CD) and 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) was prepared using the co-evaporation method, and the molar ratio of RBG to CD was determined to be approximately 1:2 by continuous variation plot for both CDs. The formation of inclusion complexes between RBG and each CD (RBG/β-CD and RBG/HP-β-CD) was evaluated by phase solubility study, Fourier transform infrared spectroscopy, and thin-layer chromatography. Powder X-ray diffraction and differential scanning calorimetry confirmed drug amorphization and encapsulation in the molecular cage for both CDs. Moreover, the inclusion complexes’ morphologies were observed using scanning electron microscopy. The dissolution rate of the inclusion complexes was markedly improved compared to that of RBG, and the complexes retained their antitumor activity, as shown in the in vitro cytotoxicity assay on a human lung adenocarcinoma cancer (A549) cell line. Moreover, less gastric mucosal irritation was observed for the inclusion complex. Thus, the inclusion complex should be considered a promising strategy for the delivery of poorly water-soluble anticancer agents, such as RBG.

Evaluation of the antifungal activity of α, β, and δ-damascone and inclusion complexes in β-cyclodextrin against Candida spp

Due to the increase in fungal resistance to existing drugs, a need exists to search for new antifungals. This study aimed to evaluate the antifungal activity of α, β, and δ-damascone and inclusion complexes with β-cyclodextrin against different Candida spp. The inclusion complex of β-damascone was prepared by the co-evaporation method using three molar proportions (1:1; 2:1; 3:1 (βDA-βCD)) and analyzed using Fourier transform infrared spectroscopy (FTIR). Standard Candida albicans (CA INCQS 40,006), Candida krusei (CK INCQS 40,095), and Candida tropicalis (CT INCQS 40,042) strains were used to evaluate antifungal activity. The substances were tested individually or in association with fluconazole (FCZ). The IC₅₀ and cell viability curve constructions were performed using the microdilution method. The minimum fungicidal concentration (MFC) was determined by the subculture method in a solid medium. The α, β, and δ-DA isolated or in combination with fluconazole (FCZ) showed significant antifungal activity. β-damascone showed effective complexation in the three molar proportions assayed; however, none of the inclusion complexes was demonstrated clinically significant effects against the fungal tested. Then, all compounds have shown promising antifungal activities; however, in vivo assays are necessary to have therapeutical application in the future.

Enhancing the water-solubility of curcuminoids-rich extract using a ternary inclusion complex system: Preparation, characterization, and anti-cancer activity

Curcuminoids are known to exert diverse pharmacological effects and used in some pharmaceutical formulations. This study describes the preparation, characterization, and enhancement in the solubility and anticancer activity of a curcuminoids-rich extract (CRE) using a ternary inclusion complex system. CRE containing 88.9% w/w curcuminoids was prepared using a 'green' microwave extraction coupled with fractionation on a column of hydrophobic adsorbent resin. The ternary complex consisting of CRE, hydroxylpropyl-β-cyclodextrin and polyvinylpyrrolidone K30 was prepared using the solvent evaporation method and thoroughly characterized using Fourier-transform infrared spectroscopy, powder X-ray diffractograms, differential scanning calorimetry and scanning electron microscopy. The ternary complex of CRE improved the water-solubility of curcuminoids (up to 70.3 µg/mL) as well as the dissolution rate when compared to those of CRE (0 µg/mL). In addition, the ternary complex exhibited significantly stronger anticancer activity against human lung adenocarcinoma (A-549), human cervical adenocarcinoma (HeLa) and human colon adenocarcinoma (HT-29) cell lines than CRE.

Development of Inclusion Complexes With Relative Humidity Responsive Capacity as Novel Antifungal Agents for Active Food Packaging

Background: Allyl isothiocyanate is an excellent antimicrobial compound that has been applied in the development of active food packaging materials in the last years. However, the high volatility of this compound could prevent a lasting effect over time. In order to avoid this problem, cyclodextrin inclusion complexes have been proposed as an alternative, being beta-cyclodextrin (β-CD) as the main candidate. In addition, β-CD could act as a relative humidity-responsive nanoparticle. In this regard, the aim of this study was to develop inclusion complexes based on β-CD and AITC as relative humidity-responsive agents, which can be used in the design of active food packaging materials. Methods: Two different β-CD:AITC inclusion complexes (2:1 and 1:1 molar ratios) were obtained by the co-precipitation method. Entrapment efficiency was determined by gas chromatography, while inclusion complexes were characterized through thermal, structural, and physicochemical techniques. Antifungal capacity of inclusion complexes was determined in a headspace system. Furthermore, the AITC release from inclusion complexes to headspace at different percentages of relative humidity was evaluated by gas chromatography, and this behavior was related with molecular dynamic studies. Key Findings and Conclusions: The entrapment efficiency of inclusion complexes was over to 60%. Two coexisting structures were proposed for inclusion complexes through spectroscopic analyses and molecular dynamic simulation. The water sorption capacity of inclusion complexes depended on relative humidity, and they exhibited a strong fungicide activity against Botrytis cinerea. Furthermore, the AITC release to headspace occurred in three stages, which were related with changes in β-CD conformational structure by water sorption and the presence of the different coexisting structures. In addition, a strong influence of relative humidity on AITC release was evidenced. These findings demonstrate that β-CD:AITC inclusion complexes could be used as potential antifungal agents for the design of food packaging materials, whose activity would be able to respond to relative humidity changes.

Cannabidiol/hydroxypropyl-β-cyclodextrin inclusion complex: structure analysis, release behavior, permeability, and bioactivity under in vitro digestion

The inclusion complex of CBD greatly improved its release performance and bioactivity.

Physico-Chemical, In Vitro and Ex Vivo Characterization of Meloxicam Potassium-Cyclodextrin Nanospheres

Nasal drug delivery has many beneficial properties, such as avoiding the first pass metabolism and rapid onset of action. However, the limited residence time on the mucosa and limited absorption of certain molecules make the use of various excipients necessary to achieve high bioavailability. The application of mucoadhesive polymers can increase the contact time with the nasal mucosa, and permeation enhancers can enhance the absorption of the drug. We aimed to produce nanoparticles containing meloxicam potassium (MEL-P) by spray drying intended for nasal application. Various cyclodextrins (hydroxypropyl-β-cyclodextrin, α-cyclodextrin) and biocompatible polymers (hyaluronic acid, poly(vinylalcohol)) were used as excipients to increase the permeation of the drug and to prepare mucoadhesive products. Physico-chemical, in vitro and ex vivo biopharmaceutical characterization of the formulations were performed. As a result of spray drying, mucoadhesive nanospheres (average particle size <1 µm) were prepared which contained amorphous MEL-P. Cyclodextrin-MEL-P complexes were formed and the applied excipients increased the in vitro and ex vivo permeability of MEL-P. The highest amount of MEL-P permeated from the α-cyclodextrin-based poly(vinylalcohol)-containing samples in vitro (209 μg/cm²) and ex vivo (1.47 μg/mm²) as well. After further optimization, the resulting formulations may be promising for eliciting a rapid analgesic effect through the nasal route.

Advances in Controlled-Release Pesticide Formulations with Improved Efficacy and Targetability

Pesticides are commonly used in modern agriculture and are important for global food security. However, postapplication losses due to degradation, photolysis, evaporation, leaching, surface runoff, and other processes may substantially reduce their efficacy. Controlled-release formulations can achieve the permeation-regulated transfer of an active ingredient from a reservoir to a target surface. Thus, they can maintain an active ingredient at a predetermined concentration for a specified period. This can reduce degradation and dissipation and other losses and has the potential to improve efficacy. Recent developments in controlled-release technology have adapted the concepts of intelligence and precision from the pharmaceutical industry. In this review, we present recent advances in the development of controlled-release formulations and discuss details of the preparation methods, material improvements, and application technologies.

In Silico Study, Physicochemical, and In Vitro Lipase Inhibitory Activity of α,β-Amyrenone Inclusion Complexes with Cyclodextrins

α,β-amyrenone (ABAME) is a triterpene derivative with many biological activities; however, its potential pharmacological use is hindered by its low solubility in water. In this context, the present work aimed to develop inclusion complexes (ICs) of ABAME with γ- and β-cyclodextrins (CD), which were systematically characterized through molecular modeling studies as well as FTIR, XRD, DSC, TGA, and SEM analyses. In vitro analyses of lipase activity were performed to evaluate possible anti-obesity properties. Molecular modeling studies indicated that the CD:ABAME ICs prepared at a 2:1 molar ratio would be more stable to the complexation process than those prepared at a 1:1 molar ratio. The physicochemical characterization showed strong evidence that corroborates with the in silico results, and the formation of ICs with CD was capable of inducing changes in ABAME physicochemical properties. ICs was shown to be a stronger inhibitor of lipase activity than Orlistat and to potentiate the inhibitory effects of ABAME on porcine pancreatic enzymes. In conclusion, a new pharmaceutical preparation with potentially improved physicochemical characteristics and inhibitory activity toward lipases was developed in this study, which could prove to be a promising ingredient for future formulations.

Pesticide remediation with cyclodextrins: a review

The aim of this review is to highlight and provide an update on the current development of pesticide remediation methods, focusing on the utilization of different cyclodextrin (CD) molecules. Because of less environmental impact and non-toxic nature, CDs are beneficial for pesticide remediation, reducing environmental risk and health hazards. They are advantageous for the removal of pesticides from contaminated areas, as well as for better pesticide formulation and, posing significant effects on the hydrolysis or degradation of pesticides. The review focuses on the current trend and innovations regarding the methods and strategies employed for using CDs in designing pesticide remediation. Nowadays, in addition to the conventional experimental techniques, molecular simulation approaches are significantly contributing to the study of such phenomena and hence are recognized as a widely used tool.

Electrospun Polymer-Free Nanofibers Incorporating Hydroxypropyl-β-cyclodextrin/Difenoconazole via Supramolecular Assembly for Antifungal Activity

In this study, flexible and self-standing hydroxypropyl-β-cyclodextrin/difenoconazole inclusion complex (HPβCD/DZ-IC) nanofibers were prepared by polymer-free electrospinning, which exhibited potential to be a new fast-dissolving pesticide formulation. Scanning electron microscopy and optical microscopy were applied to evaluate the morphology of nanofibers, which showed that the resulting HPβCD/DZ-IC nanofibers were bead-free and uniform. In addition, the proton nuclear magnetic resonance (¹H NMR) spectrum suggested a stoichiometric ratio of 1:0.9 (HPβCD/DZ). Other characterization methods, such as UV-vis absorption, fluorescence spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA), were applied in this study. On the one hand, UV-vis absorption, fluorescence spectroscopy, FT-IR, XRD, and TGA provided useful information for the successful formation of an inclusion complex; on the other hand, the results of TGA indicated the thermal stability of DZ was enhanced after the formation of inclusion complexes. Besides, the phase solubility test could explain the increased water solubility of the nanofibers of inclusion complexes formed by DZ and HPβCD. The results of molecular docking studies demonstrated the most favorable binding interactions when HPβCD combined with DZ. The dissolution test and the antifungal performance test exhibited the characteristics of fast dissolution and the excellent antifungal performance of HPβCD/DZ-IC nanofibers, respectively.

Solubility and biological activity enhancement of docetaxel via formation of inclusion complexes with three alkylenediamine-modified β-cyclodextrins

Docetaxel (DTX) is an effective and commonly used chemotherapeutic drug for cancer. However, its efficacy is greatly compromised because of its toxicity and poor water solubility. In order to overcome these disadvantages, three inclusion complexes between DTX and alkylenediamine-modified β-cyclodextrins (H1-3) with ethylene, propylene and butylene segments were prepared and characterized. The phase solubility studies demonstrated that the stoichiometry of the inclusion complexes between H1-3 and DTX were 1 : 1. The binding abilities of host H1-3 towards DTX decrease in the following order: H3 > H2 > H1, which had good consistency with the decreasing alkylene lengths of these hosts. The water solubility of DTX is remarkably increased 216, 242 and 253 times after forming inclusion complexes with H1-3, respectively. In vitro release studies of DTX from H1-3/DTX into NaAc-HAc buffer solution (pH 5.0) or PBS (pH 7.4) exhibited a preliminary stage burst effect and followed by a slow drug release. The cytotoxicity studies revealed that the H1-3/DTX inclusion complexes exhibited better cytotoxicity profiles against MCF-7, SW480 and A-549 cells than that of DTX. Furthermore, compared with the treatment of DTX, the H1/DTX inclusion complex significantly increased the cell apoptosis percentage from 17.2% to 30.2% (5 μg mL-1), 19.0% to 31.0% (10 μg mL-1), and 19.3% to 32.2% (15 μg mL-1), respectively. These results will provide useful information for H1-3/DTX inclusion complexes as safe and efficient anticancer drug formulations.

Encapsulation of thiabendazole in hydroxypropyl-β-cyclodextrin nanofibers via polymer-free electrospinning and its characterization

BACKGROUND

Thiabendazole (TBZ) is a poorly water-soluble benzimidazole fungicide. However, the water solubility of TBZ can be significantly enhanced by inclusion complexation with cyclodextrins. In this study, a thiabendazole/hydroxypropyl-β-cyclodextrin (TBZ/HPβCD) complex was synthesized and electrospinning was performed to produce a TBZ/HPβCD nanofibrous (TBZ/HPβCD-NF) complex that improved water solubility and antifungal activity.

RESULTS

The formation of TBZ/HPβCD-NF was characterized by Fourier transform infrared spectroscopy, X-ray diffraction and nuclear magnetic resonance. The morphology of TBZ/HPβCD-NF was studied by scanning electron microscopy. A phase solubility experiment showed that HPβCD exerted a great solubilization effect on TBZ, and TBZ/HPβCD-NF had better antifungal activity compared to that of TBZ alone.

CONCLUSIONS

In summary, the solid fungicidal nanodispersion prepared in the present study is a new type of formulation that can enhance the water solubility of TBZ. This formulation, which demonstrated potential as a new fast dissolving formulation type with increased efficacy, is expected to be conducive to the sustainable development of agriculture. © 2020 Society of Chemical Industry.

Developments of Smart Drug-Delivery Systems Based on Magnetic Molecularly Imprinted Polymers for Targeted Cancer Therapy: A Short Review

Cancer therapy is still a huge challenge, as especially chemotherapy shows several drawbacks like low specificity to tumor cells, rapid elimination of drugs, high toxicity and lack of aqueous solubility. The combination of molecular imprinting technology with magnetic nanoparticles provides a new class of smart hybrids, i.e., magnetic molecularly imprinted polymers (MMIPs) to overcome limitations in current cancer therapy. The application of these complexes is gaining more interest in therapy, due to their favorable properties, namely, the ability to be guided and to generate slight hyperthermia with an appropriate external magnetic field, alongside the high selectivity and loading capacity of imprinted polymers toward a template molecule. In cancer therapy, using the MMIPs as smart-drug-delivery robots can be a promising alternative to conventional direct administered chemotherapy, aiming to enhance drug accumulation/penetration into the tumors while fewer side effects on the other organs. Overview: In this review, we state the necessity of further studies to translate the anticancer drug-delivery systems into clinical applications with high efficiency. This work relates to the latest state of MMIPs as smart-drug-delivery systems aiming to be used in chemotherapy. The application of computational modeling toward selecting the optimum imprinting interaction partners is stated. The preparation methods employed in these works are summarized and their attainment in drug-loading capacity, release behavior and cytotoxicity toward cancer cells in the manner of in vitro and in vivo studies are stated. As an essential issue toward the development of a body-friendly system, the biocompatibility and toxicity of the developed drug-delivery systems are discussed. We conclude with the promising perspectives in this emerging field. Areas covered: Last ten years of publications (till June 2020) in magnetic molecularly imprinted polymeric nanoparticles for application as smart-drug-delivery systems in chemotherapy.

The Role of β-Cyclodextrin in the Textile Industry-Review

β-Cyclodextrin (β-CD) is an oligosaccharide composed of seven units of D-(+)-glucopyranose joined by α-1,4 bonds, which is obtained from starch. Its singular trunk conical shape organization, with a well-defined cavity, provides an adequate environment for several types of molecules to be included. Complexation changes the properties of the guest molecules and can increase their stability and bioavailability, protecting against degradation, and reducing their volatility. Thanks to its versatility, biocompatibility, and biodegradability, β-CD is widespread in many research and industrial applications. In this review, we summarize the role of β-CD and its derivatives in the textile industry. First, we present some general physicochemical characteristics, followed by its application in the areas of dyeing, finishing, and wastewater treatment. The review covers the role of β-CD as an auxiliary agent in dyeing, and as a matrix for dye adsorption until chemical modifications are applied as a finishing agent. Finally, new perspectives about its use in textiles, such as in smart materials for microbial control, are presented.

Release Characteristics of an Essential Oil Component Encapsulated with Cyclodextrin Shell Matrices

BACKGROUND

Essential oils are poor aqueous solubility and high volatility compounds. The encapsulation of essential oils with Cyclodextrins (CDs) can protect them from adverse environmental conditions and improve their stability. Therefore, increasing the functional capabilities of essential oils when they were used as additives in pharmaceutical and food systems. Additionally, the release of active compounds is an important issue. However, there were few studies about the effect of different CDs on the release of drugs after encapsulation. Therefore, the information on the study of release models is considerably limited.

OBJECTIVE

This study aimed to (i) characterize the physico-chemical properties and release behavior of myrcene encapsulated in the four different shell matrices of α-CD, β-CD, γ-CD and 2-hydroxypropyl-β- cyclodextrin (HP-β-CD), which were selected from the perspective of stability, and (ii) determine the release mechanism of myrcene in Inclusion Complexes (ICs).

METHODS

ICs of myrcene and four CDs were prepared by freeze-drying. The physico-chemical properties of ICs were fully characterized by laser diffraction particle size analyzer, Scanning Electron Microscope (SEM), Fourier-Transform Infrared spectroscopy (FT-IR) and Differential Scanning Calorimeter (DSC). The release behaviors of ICs at 50, 60, 70 and 80 °C were determined and described by zeroorder or first-order kinetics with the Henderson-Pabis, Peppas, Avrami and Page mathematical models. Moreover, the possible binding modes of ICs were identified with molecular modelling technique.

RESULTS

Firstly, the structure of Particle Size Distribution (PSD), FT-IR, DSC and SEM showed that (i) CDs could effectively encapsulate the myrcene molecules, and (ii) the release kinetics were well simulated by Avrami and Page models. Secondly, the release rates of the ICs experienced an unsteady state in the early stage, and gradually became almost constants period after 20 hours. Except that the release of myrcene in γ-CD/myrcene belonged to the first-order kinetic, the release models of the remaining three ICs belonged to diffusion mode. Thirdly, the calculated binding energies of the optimized structures for α-CD/myrcene, β-CD/myrcene, γ-CD/myrcene, and HP-β-CD/myrcene ICs were -4.28, -3.82, -4.04, and -3.72 kcal/mol, respectively. Finally, the encapsulation of myrcene with α-CD and β-CD was preferable according to the stability and release characteristics.

CONCLUSION

The encapsulation of myrcene was profoundly affected by the type of CDs, and the stability could be improved by complexation with suitable CDs. The binding behavior between guest and CD molecules, and the release profile of the guest molecules could be effectively explained by the kinetics parameters and molecular modelling. This study can provide an effective basis and guide for screening suitable shell matrices.

Recent advances and remaining barriers to producing novel formulations of fungicides for safe and sustainable agriculture

BACKGROUND

Fungi have evolved for 1 billion years and due to their adaptability and resilience can be found in multiple habitats around the globe. Among numerous species of fungi, some are pathogenic, and humans have battled since the dawn of organized agriculture to reduce production losses. With the arrival of fungicides many gains have been made in this struggle. However, though fungicides have greatly contributed to substantial increase in agricultural productivity, their over usage has led to both health and environmental repercussions. They remain cornerstone of the agriculture industry, however, development of safer formulations to champion sustainable and eco-friendly agriculture is of great importance, especially in face of a growing global population, climate change and increasing fungal resistance to existing compounds.

SCOPE AND APPROACH

The aim of this review is to present the state of the art in fungicides formulations developed for agrochemistry, also describing recent improvements in their safety, with special focus on fungicides used most against the ten most important fungal pathogens.

KEY FINDINGS AND CONCLUSIONS

The major focus in the field remains to be the improvement of the overall performance of the fungicide formulations. The research trends are also moving towards developing more eco-friendly formulations. However, there are still very few studies assessing nanoformulations toxicity and environmental impact. For example, there is still a limited body of research on the holistic assessment of nanoformulation shells' fate in soil and in the environment after release, as well as redistribution within plants after absorption, with no studies on human or environmental exposure.

Study on the preparation of geranyl acetone and β-cyclodextrin inclusion complex and its application in cigarette flavoring

β-Cyclodextrin (β-CD) inclusion complex containing geranyl acetone as a guest was prepared by saturated water solution method. Furthermore, the structure and properties of the inclusion complex were studied. The formation of the inclusion complex was demonstrated by. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (X-RD), thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). The thermodynamic analysis of the inclusion complex showed that the inclusion reaction is an endothermic spontaneous reaction. The average of △H, △S and △G is 11.66 kJ mol-1, 0.082 kJ mol-1 and - 14.49 kJ mol-1, respectively. Moreover, the kinetic analysis of thermal decomposition of the inclusion compound showed that the thermal decomposition reaction is a first-order reaction (the inclusion ratio is 1:1), the average activation energy of the reaction is 180.90 kJ mol-1, and the binding force in the inclusion compound is mainly Van der Waals force. The flavor test of cigarettes showed that the inclusion compound improved the stability of geranyl acetone and the sensory quality of cigarettes. This study improves the solubility and thermal stability of geranyl acetone, and provides theoretical support and technical guidance for expanding the application of geranyl acetone.

Fabrication and Characterization of a Microemulsion Stabilized by Integrated Phosvitin and Gallic Acid

The purpose of this work was to conjugate phosvitin (Pv) with gallic acid (GA) to explore a new emulsifier that had both good emulsifying properties and antioxidant activity. The Pv-GA complex was prepared at a GA concentration of 1.5 mg/mL with pH 9.0. The Pv-GA complex obtained was identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and characterized with infrared, ultraviolet, and fluorescence spectra. The emulsifying activity and stability of the Pv-GA complex were slightly improved, and antioxidant activities was significantly enhanced. Furthermore, the Pv-GA complex was used to load conjugated linoleic acid (CLA) for microemulsion preparation. Results showed that the Pv-GA complex could increase the viscosity and lipid antioxidant capacity of Pv-GA/CLA microemulsion. The Pv-GA/CLA microemulsion had remarkable emulsifying activity, emulsifying stability, pH, and thermal stability and poor salt stability.

Design, Synthesis, and Herbicidal Activity of Novel Diphenyl Ether Derivatives Containing Fast Degrading Tetrahydrophthalimide

To seek new protoporphyrinogen oxidase (PPO) inhibitors with better biological activity, a series of novel diphenyl ether derivatives containing tetrahydrophthalimide were designed based on the principle of substructure splicing and bioisomerization. PPO inhibition experiments exhibited that 6c is the most potential compound, with the half-maximal inhibitory concentration (IC₅₀) value of 0.00667 mg/L, showing 7 times higher activity than Oxyfluorfen (IC₅₀ = 0.0426 mg/L) against maize PPO and similar herbicidal activities to Oxyfluorfen in weeding experiments in greenhouses and field weeding experiments. In view of the inspected bioactivities, the structure-activity relationship (SAR) of this series of compounds was also discussed. Crop selection experiments demonstrate that compound 6c is safe for soybeans, maize, rice, peanuts, and cotton at a dose of 300 g ai/ha. Accumulation analysis experiments showed that the accumulation of 6c in some crops (soybeans, peanuts, and cotton) was significantly lower than Oxyfluorfen. Current work suggests that compound 6c may be developed as a new herbicide candidate in fields.

Design, Synthesis, and Biological Activity of Novel Diazabicyclo Derivatives as Safeners

Herbicide safeners selectively protect crops from herbicide damage without reducing the herbicidal efficiency on target weed species. The title compounds were designed by the intermediate derivatization approach and fragment splicing to exploit novel potential safeners. A total of 31 novel diazabicyclo derivatives were synthesized by the microwave-assistant method using isoxazole-4-carbonyl chloride and diazabicyclo derivatives. All synthetic compounds were confirmed by infrared, ¹H and ¹³C nuclear magnetic resonance, and high-resolution mass spectrometry. The bioassay results demonstrated that most of the title compounds could reduce the nicosulfuron phytotoxicity on maize. The glutathione S-transferase (GST) activity in vivo was assayed, and compound 4(S15) revealed an inspiring safener activity comparable to commercialized safeners isoxadifen-ethyl and BAS-145138. The molecular docking model exhibited that the competition at the active sites of target enzymes between compound 4(S15) and nicosulfuron was investigated with respect to herbicide detoxification. The current work not only provided a powerful supplement to the intermediate derivatization approach and fragment splicing in design pesticide bioactive molecules but also assisted safener development and optimization.