1
|
Wu J, Yang X, Xu D, Ong SL, Hu J. Peroxydisulfate-based Non-radical Oxidation of Rhodamine B by Fe-Mn Doped Granular Activated Carbon: Kinetics and Mechanism Study. Chem Asian J 2024:e202400482. [PMID: 38884566 DOI: 10.1002/asia.202400482] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/29/2024] [Revised: 06/12/2024] [Accepted: 06/12/2024] [Indexed: 06/18/2024]
Abstract
While numerous persulfate-based advanced oxidation processes (AOPs) have been studied based on fancy catalysts, the practical combination of Fe or Mn modified granular activated carbon (GAC) has seldom been investigated. The present study focused on a green and readily synthesized Fe-Mn bimetallic oxide doped GAC (Fe-Mn@GAC), to uncover its catalytic kinetics and mechanism when used in the peroxydisulfate (PDS)-based oxidation process for degrading Rhodamine B (RhB), a representative xenobiotic dye. The synthesized Fe-Mn@GAC was characterized by SEM-EDS, XRD, ICP-OES and XPS analyses to confirm its physicochemical properties. The catalytic kinetics of Fe-Mn@GAC+PDS system were evaluated under varying conditions, including PDS and catalyst dosages, solution pH, and the presence of anions. It was found Fe-Mn@GAC exhibited robust catalytic performance, being insensitive to a wide pH range from 3 to 11, and the presence of anions such as Cl-, SO4 2-, NO3 - and CO3 2-. The catalytic mechanism was investigated by EPR and quenching experiments. The results indicated the catalytic system processed a non-radical oxidation pathway, dominated by direct electron transfer between RhB and Fe-Mn@GAC, with singlet oxygen (1O2) playing a secondary role. The catalytic system also managed to maintain a RhB removal above 81 % in successive 10 cycles, and recover to 89.5 % after simple DI water rinse, showing great reusability. The catalytic system was further challenged by real dye-containing wastewater, achieving a decolorization rate of 84.5 %. This work not only provides fresh insight into the kinetics and mechanism of the Fe-Mn@GAC+PDS catalytic system, but also demonstrates its potential in the practical application in real dye-containing wastewater treatment.
Collapse
Affiliation(s)
- Jiahua Wu
- Advanced Water Technology Laboratory, National University of Singapore (Suzhou) Research Institute, No.377 Linquan Street, Suzhou Industrial Park, Suzhou, Jiangsu, 215123, China
| | - Xuan Yang
- Advanced Water Technology Laboratory, National University of Singapore (Suzhou) Research Institute, No.377 Linquan Street, Suzhou Industrial Park, Suzhou, Jiangsu, 215123, China
| | - Dong Xu
- Advanced Water Technology Laboratory, National University of Singapore (Suzhou) Research Institute, No.377 Linquan Street, Suzhou Industrial Park, Suzhou, Jiangsu, 215123, China
| | - Say Leong Ong
- Advanced Water Technology Laboratory, National University of Singapore (Suzhou) Research Institute, No.377 Linquan Street, Suzhou Industrial Park, Suzhou, Jiangsu, 215123, China
- Department of Civil & Environmental Engineering, National University of Singapore, 1 Engineering Drive 2, Singapore, 117576, Singapore
| | - Jiangyong Hu
- Advanced Water Technology Laboratory, National University of Singapore (Suzhou) Research Institute, No.377 Linquan Street, Suzhou Industrial Park, Suzhou, Jiangsu, 215123, China
- Department of Civil & Environmental Engineering, National University of Singapore, 1 Engineering Drive 2, Singapore, 117576, Singapore
| |
Collapse
|
2
|
Wang S, Gao J, Wang Y, Lu H, Yang S, Zheng L, Li Y, He G. Solar-powered detection of organic dyes using nitrogen-doped N-TiO 2/Ag 2O nanorod arrays. Mikrochim Acta 2024; 191:353. [PMID: 38809482 DOI: 10.1007/s00604-024-06429-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/08/2024] [Accepted: 05/12/2024] [Indexed: 05/30/2024]
Abstract
Organic pollutant detection has caused widespread concern regarding due to their potential environmental and human health risks. In this work, a nitrogen-doped titanium dioxide/silver oxide (N-TiO2/Ag2O) composite has been designed as a sensitive photoelectrochemical (PEC) monitoring platform of organic dyes. Sensitive determination relies on the outstanding PEC performance of N-TiO2/Ag2O. The improved PEC performance stems from the effective separation of photocarriers and the extended light response range provided by the narrowing bandgap and a p-n junction with N-TiO2/Ag2O. The N-TiO2/Ag2O electrode exhibits a photocurrent density of up to 2.2 mA/cm2, demonstrating three times increase compared with the photocurrent density observed with the pure TiO2 film. The linear detection range for rhodamine B (RhB), methylene blue (MB), and methyl orange (MO) is 0.2 ng/mL to 10 μg/mL with an ultrasensitive detection limit of 0.2 ng/mL without bias voltage. Due to the outstanding photocurrent density and sensitive response to organic pollutants, the N-TiO2/Ag2O PEC sensor provided a promising analytical method to detect environmental organic dyes.
Collapse
Affiliation(s)
- Shixuan Wang
- School of Mechanics and Photoelectric Physics, Anhui University of Science and Technology, Huainan, 232001, People's Republic of China
- The First Affiliated Hospital of Anhui University of Science and Technology (Huainan First People's Hospital), Huainan, 232001, People's Republic of China
| | - Juan Gao
- School of Mechanics and Photoelectric Physics, Anhui University of Science and Technology, Huainan, 232001, People's Republic of China.
- The First Affiliated Hospital of Anhui University of Science and Technology (Huainan First People's Hospital), Huainan, 232001, People's Republic of China.
| | - Yanfen Wang
- School of Materials Science and Engineering, Anhui University of Science and Technology, Huainan, 232001, People's Republic of China
| | - Haowen Lu
- School of Mechanics and Photoelectric Physics, Anhui University of Science and Technology, Huainan, 232001, People's Republic of China
| | - Sen Yang
- School of Mechanics and Photoelectric Physics, Anhui University of Science and Technology, Huainan, 232001, People's Republic of China
| | - Lingcheng Zheng
- School of Mechanics and Photoelectric Physics, Anhui University of Science and Technology, Huainan, 232001, People's Republic of China
| | - Yang Li
- School of Mechanics and Photoelectric Physics, Anhui University of Science and Technology, Huainan, 232001, People's Republic of China
| | - Gang He
- School of Materials Science and Engineering, Anhui University, Hefei, 230601, P.R. China
| |
Collapse
|
3
|
Yang H, Wu K, Zhu J, Lin Y, Ma X, Cao Z, Ma W, Gong F, Liu C, Pan J. Highly efficient and selective removal of anionic dyes from aqueous solutions using polyacrylamide/peach gum polysaccharide/attapulgite composite hydrogels with positively charged hybrid network. Int J Biol Macromol 2024; 266:131213. [PMID: 38552690 DOI: 10.1016/j.ijbiomac.2024.131213] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/02/2023] [Revised: 03/08/2024] [Accepted: 03/26/2024] [Indexed: 04/02/2024]
Abstract
To avoid the weakness (lower adsorption rate and selectivity) of peach gum polysaccharide (PGP) and improve the adsorption performance of polyacrylamide (PAAm) hydrogel (lower adsorption capacity), in the present work, the PGP was chemically tailored to afford ammoniated PGP (APGP) and quaternized PGP (QPGP), and attapulgite (ATP) was bi-functionalized with cation groups and carbon‑carbon double bond. Then, PAAm/APGP and PAAm/QPGP/ATP hydrogels were synthesized via redox polymerization. The synthesis procedure and properties of hydrogels were traced by FTIR, SEM, XPS, TGA, TEM, and BET methods, and the dye adsorption performance of the hydrogels was evaluated using the new coccine (NC) and tartrazine (TTZ) aqueous solutions as the model anionic dyes. Effects of initial dye concentration, pH, and ionic strength on the adsorption were investigated. Compared with PAAm/APGP hydrogel, PAAm/APGP/ATP hydrogel exhibits higher adsorption rate, superior adsorption capacity, stability, and selectivity towards anionic dye. The adsorption process of PAAm/QPGP/ATP hydrogel reached equilibrium in about 20 min and followed the pseudo-second-order kinetic model and Langmuir isotherm. The adsorption capacities towards NC and TTZ of PAAm/QPGP/ATP hydrogel were calculated as 873.235 and 731.432 mg/g. This hydrogel adsorbent originating from PAAm, PGP, and ATP shows great promise for application in practical water treatment.
Collapse
Affiliation(s)
- Haicun Yang
- Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, Changzhou University, Changzhou, Jiangsu 213164, People's Republic of China; National Experimental Demonstration Center for Materials Science and Engineering (Changzhou University), Changzhou, Jiangsu 213164, People's Republic of China
| | - Kaide Wu
- Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, Changzhou University, Changzhou, Jiangsu 213164, People's Republic of China
| | - Jianbo Zhu
- Shandong Jianbang New Material Co., Ltd, Jining, Shandong 370800, People's Republic of China
| | - Yongxiang Lin
- Shandong Jianbang New Material Co., Ltd, Jining, Shandong 370800, People's Republic of China
| | - Xudong Ma
- Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, Changzhou University, Changzhou, Jiangsu 213164, People's Republic of China
| | - Zheng Cao
- Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, Changzhou University, Changzhou, Jiangsu 213164, People's Republic of China; National Experimental Demonstration Center for Materials Science and Engineering (Changzhou University), Changzhou, Jiangsu 213164, People's Republic of China.
| | - Wenzhong Ma
- Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, Changzhou University, Changzhou, Jiangsu 213164, People's Republic of China; National Experimental Demonstration Center for Materials Science and Engineering (Changzhou University), Changzhou, Jiangsu 213164, People's Republic of China.
| | - Fanghong Gong
- Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, Changzhou University, Changzhou, Jiangsu 213164, People's Republic of China; School of Mechanical Technology, Wuxi Institute of Technology, Wuxi, Jiangsu 214121, People's Republic of China.
| | - Chunlin Liu
- Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, Changzhou University, Changzhou, Jiangsu 213164, People's Republic of China; National Experimental Demonstration Center for Materials Science and Engineering (Changzhou University), Changzhou, Jiangsu 213164, People's Republic of China
| | - Ji Pan
- College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, Jiangsu 215123, People's Republic of China; School of Rail Transportation, Soochow University, Suzhou, Jiangsu 215123, People's Republic of China.
| |
Collapse
|
4
|
Hajareh Haghighi F, Binaymotlagh R, Pintilei PS, Chronopoulou L, Palocci C. Preparation of Peptide-Based Magnetogels for Removing Organic Dyes from Water. Gels 2024; 10:287. [PMID: 38786204 PMCID: PMC11120949 DOI: 10.3390/gels10050287] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/28/2024] [Revised: 04/18/2024] [Accepted: 04/22/2024] [Indexed: 05/25/2024] Open
Abstract
Water pollution by organic dyes represents a major health and environmental issue. Despite the fact that peptide-based hydrogels are considered to be optimal absorbents for removing such contaminants, hydrogel systems often suffer from a lack of mechanical stability and complex recovery. Recently, we developed an enzymatic approach for the preparation of a new peptide-based magnetogel containing polyacrylic acid-modified γ-Fe2O3 nanoparticles (γ-Fe2O3NPs) that showed the promising ability to remove cationic metal ions from aqueous phases. In the present work, we tested the ability of the magnetogel formulation to remove three model organic dyes: methyl orange, methylene blue, and rhodamine 6G. Three different hydrogel-based systems were studied, including: (1) Fmoc-Phe3 hydrogel; (2) γ-Fe2O3NPs dispersed in the peptide-based gel (Fe2O3NPs@gel); and (3) Fe2O3NPs@gel with the application of a magnetic field. The removal efficiencies of such adsorbents were evaluated using two different experimental set-ups, by placing the hydrogel sample inside cuvettes or, alternatively, by placing them inside syringes. The obtained peptide magnetogel formulation could represent a valuable and environmentally friendly alternative to currently employed adsorbents.
Collapse
Affiliation(s)
- Farid Hajareh Haghighi
- Department of Chemistry, Sapienza University of Rome, Piazzale Aldo Moro 5, 00185 Rome, Italy
| | - Roya Binaymotlagh
- Department of Chemistry, Sapienza University of Rome, Piazzale Aldo Moro 5, 00185 Rome, Italy
| | - Paula Stefana Pintilei
- Department of Chemistry, Sapienza University of Rome, Piazzale Aldo Moro 5, 00185 Rome, Italy
| | - Laura Chronopoulou
- Department of Chemistry, Sapienza University of Rome, Piazzale Aldo Moro 5, 00185 Rome, Italy
- Research Center for Applied Sciences to the Safeguard of Environment and Cultural Heritage (CIABC), Sapienza University of Rome, Piazzale Aldo Moro 5, 00185 Rome, Italy
| | - Cleofe Palocci
- Department of Chemistry, Sapienza University of Rome, Piazzale Aldo Moro 5, 00185 Rome, Italy
- Research Center for Applied Sciences to the Safeguard of Environment and Cultural Heritage (CIABC), Sapienza University of Rome, Piazzale Aldo Moro 5, 00185 Rome, Italy
| |
Collapse
|
5
|
Saravanan A, Yaashikaa PR, Ramesh B, Shaji A, Deivayanai VC. Microorganism-mediated bioremediation of dyes from contaminated soil: Mechanisms, recent advances, and future perspectives. Food Chem Toxicol 2024; 185:114491. [PMID: 38325634 DOI: 10.1016/j.fct.2024.114491] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/26/2023] [Revised: 01/25/2024] [Accepted: 01/26/2024] [Indexed: 02/09/2024]
Abstract
Many methods have been proposed for the remediation of dye-contaminated soils, a widespread form of environment pollution. Bioremediation, it is hoped, can combine ecological benefits with efficiency of dye decontamination. We review the types and sources of dye contaminants; their possible effects on plant, animal, and human health; and emerging strategies for microbial bioremediation. Challenges, limitations, recommendations for future research, and prospects for large-scale commercialization of microbial bioremediation are discussed.
Collapse
Affiliation(s)
- A Saravanan
- Department of Biotechnology, Saveetha School of Engineering, SIMATS, Chennai, 602105, India.
| | - P R Yaashikaa
- Department of Biotechnology, Saveetha School of Engineering, SIMATS, Chennai, 602105, India
| | - B Ramesh
- Department of Sustainable Engineering, Saveetha School of Engineering, SIMATS, Chennai, 602105, India
| | - Alan Shaji
- Department of Biotechnology, Saveetha School of Engineering, SIMATS, Chennai, 602105, India
| | - V C Deivayanai
- Department of Biotechnology, Saveetha School of Engineering, SIMATS, Chennai, 602105, India
| |
Collapse
|
6
|
Verma A, Fu YP. The prospect of Cu xO-based catalysts in photocatalysis: From pollutant degradation, CO 2 reduction, and H 2 production to N 2 fixation. ENVIRONMENTAL RESEARCH 2024; 241:117656. [PMID: 37980987 DOI: 10.1016/j.envres.2023.117656] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/10/2023] [Revised: 10/30/2023] [Accepted: 11/11/2023] [Indexed: 11/21/2023]
Abstract
The topic of photocatalysis and CuxO-based materials has been intertwined for quite a long time. Its relatively high abundance in the earth's crust makes it an important target for researchers around the globe. One of the properties exploited by researchers is its ability to exist in different oxidation states (Cu0, Cu+, Cu2+, and Cu3+) and its implications on photocatalytic efficiency improvement. Recently, they have been extensively used as photocatalytic materials for dye and pollutant degradation. However, it has almost reached saturation levels, therefore, currently, they are being mostly utilized for CO2 reduction and H2 evolution. Hence, this review will discuss the evolution (in application) of CuxO-based photocatalysts, relating to their past, present, and future. Moreover, photocatalytic efficiency improvement strategies such as doping, heterojunction formation, and carbonaceous construction with other materials will also be touched upon. Finally, the prospect of Cu2O-based photocatalysts will be discussed in the field of photocatalytic N2 fixation to ammonia. The significance of N2 chemisorption on photocatalysts to maximize ammonia production will also be given importance.
Collapse
Affiliation(s)
- Atul Verma
- Department of Materials Science and Engineering, National Dong Hwa University, Shou-Feng, Hualien 97401, Taiwan
| | - Yen-Pei Fu
- Department of Materials Science and Engineering, National Dong Hwa University, Shou-Feng, Hualien 97401, Taiwan
| |
Collapse
|
7
|
Omar G, Abd Ellah R, Elzayat M, Afifi G, Imam H. Superior removal of hazardous dye using Ag/Au core–shell nanoparticles prepared by laser ablation. OPTICS & LASER TECHNOLOGY 2024; 168:109868. [DOI: 10.1016/j.optlastec.2023.109868] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/02/2023]
|
8
|
Mudgal D, Yadav N, Singh J, Srivastava GK, Mishra V. Xanthan gum-based copper nano-magnetite doped carbon aerogel: A promising candidate for environmentally friendly catalytic dye degradation. Int J Biol Macromol 2023; 253:127491. [PMID: 37852396 DOI: 10.1016/j.ijbiomac.2023.127491] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/16/2023] [Revised: 08/14/2023] [Accepted: 10/15/2023] [Indexed: 10/20/2023]
Abstract
In this work, a novel copper nano-magnetite doped carbon aerogel (CXMCA) was created utilizing a simple graft co-polymerization approach with xanthan gum (XG) as a template to tackle the agglomeration problem caused by magnetic nanoparticle magnetism. The results indicated that the XG based CXMCA exhibited outstanding magnetic properties (Ms = 36.52 emu/g) as well as strong catalytic activity for the degradation of cationic and anionic dyes. Among all organic dyes, methylene blue and crystal violet (MB, CV) as cationic dyes, as well as congo red and methyl orange (CR, and MO) as anionic dyes, CXMCA demonstrated an exceptional dye degradation rate (8.06 × 10-3 s-1-1.12 × 10-2 s-1) and was highly competent for cationic dyes with degradation (90 %-98 %) as compared to its unsupported magnetic nanoparticles. The formation of CXMCA catalyst is clearly confirmed by the FTIR, XRD, XPS, VSM, SEM & TEM analyses. We report a very effective xanthan gum-based copper nano-magnetite doped carbon aerogel dye scavenger with application in percentage dye degradation and kinetic investigations, as well as a remarkable reusability assay up to 7 repetition cycles. The findings suggested that using biological macromolecules like xanthan gum as a foundation to generate magnetic aerogels might be a good choice for evaluating environmental aspects.
Collapse
Affiliation(s)
- Deeksha Mudgal
- Amity Institute of Click Chemistry Research and Studies, Amity University, Noida, Uttar Pradesh 201313, India
| | - Nisha Yadav
- Amity Institute of Click Chemistry Research and Studies, Amity University, Noida, Uttar Pradesh 201313, India
| | - Jay Singh
- Department of Chemistry, Banaras Hindu University, Varanasi, Uttar Pradesh 221005, India
| | | | - Vivek Mishra
- Amity Institute of Click Chemistry Research and Studies, Amity University, Noida, Uttar Pradesh 201313, India.
| |
Collapse
|
9
|
Tinoco Navarro LK, Jaroslav C. Enhancing Photocatalytic Properties of TiO 2 Photocatalyst and Heterojunctions: A Comprehensive Review of the Impact of Biphasic Systems in Aerogels and Xerogels Synthesis, Methods, and Mechanisms for Environmental Applications. Gels 2023; 9:976. [PMID: 38131962 PMCID: PMC10742597 DOI: 10.3390/gels9120976] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2023] [Revised: 11/30/2023] [Accepted: 12/03/2023] [Indexed: 12/23/2023] Open
Abstract
This review provides a detailed exploration of titanium dioxide (TiO2) photocatalysts, emphasizing structural phases, heterophase junctions, and their impact on efficiency. Key points include diverse synthesis methods, with a focus on the sol-gel route and variants like low-temperature hydrothermal synthesis (LTHT). The review delves into the influence of acid-base donors on gelation, dissects crucial drying techniques for TiO2 aerogel or xerogel catalysts, and meticulously examines mechanisms underlying photocatalytic activity. It highlights the role of physicochemical properties in charge diffusion, carrier recombination, and the impact of scavengers in photo-oxidation/reduction. Additionally, TiO2 doping techniques and heterostructures and their potential for enhancing efficiency are briefly discussed, all within the context of environmental applications.
Collapse
Affiliation(s)
- Lizeth Katherine Tinoco Navarro
- CEITEC-Central European Institute of Technology, Brno University of Technology, Purkynova 656/123, 612 00 Brno, Czech Republic;
| | - Cihlar Jaroslav
- CEITEC-Central European Institute of Technology, Brno University of Technology, Purkynova 656/123, 612 00 Brno, Czech Republic;
- Institute of Materials Science and Engineering, Brno University of Technology, Technicka 2, 616 69 Brno, Czech Republic
| |
Collapse
|
10
|
Pirozzi A, Rincón E, Espinosa E, Donsì F, Serrano L. Nanostructured Cellulose-Based Aerogels: Influence of Chemical/Mechanical Cascade Processes on Quality Index for Benchmarking Dye Pollutant Adsorbents in Wastewater Treatment. Gels 2023; 9:958. [PMID: 38131944 PMCID: PMC10742814 DOI: 10.3390/gels9120958] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/10/2023] [Revised: 12/01/2023] [Accepted: 12/05/2023] [Indexed: 12/23/2023] Open
Abstract
(1) Background: Nanostructured cellulose has emerged as an efficient bio-adsorbent aerogel material, offering biocompatibility and renewable sourcing advantages. This study focuses on isolating (ligno)cellulose nanofibers ((L)CNFs) from barley straw and producing aerogels to develop sustainable and highly efficient decontamination systems. (2) Methods: (Ligno)cellulose pulp has been isolated from barley straw through a pulping process, and was subsequently deconstructed into nanofibers employing various pre-treatment methods (TEMPO-mediated oxidation process or PFI beater mechanical treatment) followed by the high-pressure homogenization (HPH) process. (3) Results: The aerogels made by (L)CNFs, with a higher crystallinity degree, larger aspect ratio, lower shrinkage rate, and higher Young's modulus than cellulose aerogels, successfully adsorb and remove organic dye pollutants from wastewater. (L)CNF-based aerogels, with a quality index (determined using four characterization parameters) above 70%, exhibited outstanding contaminant removal capacity over 80%. The high specific surface area of nanocellulose isolated using the TEMPO oxidation process significantly enhanced the affinity and interactions between hydroxyl and carboxyl groups of nanofibers and cationic groups of contaminants. The efficacy in adsorbing cationic dyes in wastewater onto the aerogels was verified by the Langmuir adsorption isotherm model. (4) Conclusions: This study offers insights into designing and applying advanced (L)CNF-based aerogels as efficient wastewater decontamination and environmental remediation platforms.
Collapse
Affiliation(s)
- Annachiara Pirozzi
- Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy;
| | - Esther Rincón
- BioPrEn Group (RNM 940), Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Faculty of Science, Universidad de Córdoba, 14014 Córdoba, Spain; (E.R.); (E.E.)
| | - Eduardo Espinosa
- BioPrEn Group (RNM 940), Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Faculty of Science, Universidad de Córdoba, 14014 Córdoba, Spain; (E.R.); (E.E.)
| | - Francesco Donsì
- Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy;
| | - Luis Serrano
- BioPrEn Group (RNM 940), Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Faculty of Science, Universidad de Córdoba, 14014 Córdoba, Spain; (E.R.); (E.E.)
| |
Collapse
|
11
|
Li R, Wang Y, Zeng F, Si C, Zhang D, Xu W, Shi J. Advances in Polyoxometalates as Electron Mediators for Photocatalytic Dye Degradation. Int J Mol Sci 2023; 24:15244. [PMID: 37894924 PMCID: PMC10607072 DOI: 10.3390/ijms242015244] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/07/2023] [Revised: 10/06/2023] [Accepted: 10/11/2023] [Indexed: 10/29/2023] Open
Abstract
The increasing concerns over the environment and the growing demand for sustainable water treatment technologies have sparked substantial interest in the field of photocatalytic dye removal. Polyoxometalates (POMs), known for their intricate metal-oxygen anion clusters, have received considerable attention due to their versatile structures, compositions, and efficient facilitation of photo-induced electron transfers. This paper provides an overview of the ongoing research progress in the realm of photocatalytic dye degradation utilizing POMs and their derivatives. The details encompass the compositions of catalysts, catalytic efficacy, and light absorption propensities, and the photocatalytic mechanisms inherent to POM-based materials for dye degradation are exhaustively expounded upon. This review not only contributes to a better understanding of the potential of POM-based materials in photocatalytic dye degradation, but also presents the advancements and future prospects in this domain of environmental remediation.
Collapse
Affiliation(s)
| | | | | | | | - Dan Zhang
- Key Laboratory of Biomass Materials Science and Technology of Jilin Province, Beihua University, Binjiang East Road, Jilin 132013, China; (R.L.); (Y.W.); (F.Z.); (C.S.); (W.X.)
| | | | - Junyou Shi
- Key Laboratory of Biomass Materials Science and Technology of Jilin Province, Beihua University, Binjiang East Road, Jilin 132013, China; (R.L.); (Y.W.); (F.Z.); (C.S.); (W.X.)
| |
Collapse
|
12
|
Ma Q, Li Y, Tan Y, Xu B, Cai J, Zhang Y, Wang Q, Wu Q, Yang B, Huang J. Recent Advances in Metal-Organic Framework (MOF)-Based Photocatalysts: Design Strategies and Applications in Heavy Metal Control. Molecules 2023; 28:6681. [PMID: 37764456 PMCID: PMC10535165 DOI: 10.3390/molecules28186681] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/23/2023] [Revised: 09/09/2023] [Accepted: 09/14/2023] [Indexed: 09/29/2023] Open
Abstract
The heavy metal contamination of water systems has become a major environmental concern worldwide. Photocatalysis using metal-organic frameworks (MOFs) has emerged as a promising approach for heavy metal remediation, owing to the ability of MOFs to fully degrade contaminants through redox reactions that are driven by photogenerated charge carriers. This review provides a comprehensive analysis of recent developments in MOF-based photocatalysts for removing and decontaminating heavy metals from water. The tunable nature of MOFs allows the rational design of composition and features to enhance light harvesting, charge separation, pollutant absorptivity, and photocatalytic activities. Key strategies employed include metal coordination tuning, organic ligand functionalization, heteroatom doping, plasmonic nanoparticle incorporation, defect engineering, and morphology control. The mechanisms involved in the interactions between MOF photocatalysts and heavy metal contaminants are discussed, including light absorption, charge carrier separation, metal ion adsorption, and photocatalytic redox reactions. The review highlights diverse applications of MOF photocatalysts in treating heavy metals such as lead, mercury, chromium, cadmium, silver, arsenic, nickel, etc. in water remediation. Kinetic modeling provides vital insights into the complex interplay between coupled processes such as adsorption and photocatalytic degradation that influence treatment efficiency. Life cycle assessment (LCA) is also crucial for evaluating the sustainability of MOF-based technologies. By elucidating the latest advances, current challenges, and future opportunities, this review provides insights into the potential of MOF-based photocatalysts as a sustainable technology for addressing the critical issue of heavy metal pollution in water systems. Ongoing efforts are needed to address the issues of stability, recyclability, scalable synthesis, and practical reactor engineering.
Collapse
Affiliation(s)
- Qiang Ma
- Key Laboratory of Drinking Water Source Protection in Chengdu Basin of Sichuan Province, Sichuan Provincial Engineering Research Center of City Solid Waste Energy and Building Materials Conversion & Utilization Technology, Chengdu University, Chengdu 610106, China; (Q.M.); (Y.L.); (Y.T.); (Q.W.); (Q.W.)
- State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084, China
| | - Yunling Li
- Key Laboratory of Drinking Water Source Protection in Chengdu Basin of Sichuan Province, Sichuan Provincial Engineering Research Center of City Solid Waste Energy and Building Materials Conversion & Utilization Technology, Chengdu University, Chengdu 610106, China; (Q.M.); (Y.L.); (Y.T.); (Q.W.); (Q.W.)
| | - Yawen Tan
- Key Laboratory of Drinking Water Source Protection in Chengdu Basin of Sichuan Province, Sichuan Provincial Engineering Research Center of City Solid Waste Energy and Building Materials Conversion & Utilization Technology, Chengdu University, Chengdu 610106, China; (Q.M.); (Y.L.); (Y.T.); (Q.W.); (Q.W.)
| | - Bowen Xu
- Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Kunming 650500, China;
| | - Jun Cai
- National Joint Engineering Research Center of Energy Saving and Environmental Protection Technology in Metallurgy and Chemical Engineering Industry, Kunming University of Science and Technology, Kunming 650093, China;
| | - Yingjie Zhang
- College of Agriculture and Biological Science, Dali University, Dali 671000, China;
| | - Qingyuan Wang
- Key Laboratory of Drinking Water Source Protection in Chengdu Basin of Sichuan Province, Sichuan Provincial Engineering Research Center of City Solid Waste Energy and Building Materials Conversion & Utilization Technology, Chengdu University, Chengdu 610106, China; (Q.M.); (Y.L.); (Y.T.); (Q.W.); (Q.W.)
| | - Qihong Wu
- Key Laboratory of Drinking Water Source Protection in Chengdu Basin of Sichuan Province, Sichuan Provincial Engineering Research Center of City Solid Waste Energy and Building Materials Conversion & Utilization Technology, Chengdu University, Chengdu 610106, China; (Q.M.); (Y.L.); (Y.T.); (Q.W.); (Q.W.)
| | - Bowen Yang
- Key Laboratory of Drinking Water Source Protection in Chengdu Basin of Sichuan Province, Sichuan Provincial Engineering Research Center of City Solid Waste Energy and Building Materials Conversion & Utilization Technology, Chengdu University, Chengdu 610106, China; (Q.M.); (Y.L.); (Y.T.); (Q.W.); (Q.W.)
| | - Jin Huang
- Key Laboratory of Drinking Water Source Protection in Chengdu Basin of Sichuan Province, Sichuan Provincial Engineering Research Center of City Solid Waste Energy and Building Materials Conversion & Utilization Technology, Chengdu University, Chengdu 610106, China; (Q.M.); (Y.L.); (Y.T.); (Q.W.); (Q.W.)
| |
Collapse
|
13
|
Ansari H, Oladipo AA, Gazi M. Alginate-based porous polyHIPE for removal of single and multi-dye mixtures: Competitive isotherm and molecular docking studies. Int J Biol Macromol 2023; 246:125736. [PMID: 37423450 DOI: 10.1016/j.ijbiomac.2023.125736] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2023] [Revised: 06/09/2023] [Accepted: 07/06/2023] [Indexed: 07/11/2023]
Abstract
A novel hydrophilic porous alginate-based polyHIPE (AGA) was synthesized via an oil-in-water emulsion templating approach. AGA was used as an adsorbent for removing methylene blue (MB) dye in single- and multi-dye systems. BET, SEM, FTIR, XRD, and TEM were used to characterize AGA to elucidate its morphology, composition and physicochemical properties. According to the results, 1.25 g/L AGA adsorbed 99 % of 10 mg/L MB in 3 h in a single-dye system. The removal efficiency decreased to 97.2 % in the presence of 10 mg/L Cu2+ ions and 40.2 % when the solution salinity increased to 70 %. In a single-dye system, the experimental data do not match well with the Freundlich isotherm, pseudo-first order, and the Elovich kinetic model, however, in a multi-dye system, it fit well with both extended Langmuir and the Sheindorf-Rebhun-Sheintuch. Notably, AGA removed 66.87 mg/g in a dye solution containing only MB, whereas 50.14-60.01 mg/g adsorption of MB was accomplished in a multiple-dye system. According to the molecular docking analysis, the dye removal process involved chemical bonds between the functional groups of AGA and the dye molecules, hydrogen bonds, hydrophobic and electrostatic interactions. The overall binding score of MB decreased from -26.9 kcal/mol in a single-dye system to -18.3 kcal/mol in a ternary system.
Collapse
Affiliation(s)
- Hoda Ansari
- Polymeric Materials Research Laboratory, Chemistry Department, Faculty of Arts and Science, Eastern Mediterranean University, TR North Cyprus, Famagusta via Mersin 10, Türkiye
| | - Akeem Adeyemi Oladipo
- Polymeric Materials Research Laboratory, Chemistry Department, Faculty of Arts and Science, Eastern Mediterranean University, TR North Cyprus, Famagusta via Mersin 10, Türkiye.
| | - Mustafa Gazi
- Polymeric Materials Research Laboratory, Chemistry Department, Faculty of Arts and Science, Eastern Mediterranean University, TR North Cyprus, Famagusta via Mersin 10, Türkiye.
| |
Collapse
|
14
|
Yin X, Ke T, Zhu H, Xu P, Wang H. Efficient Removal of Heavy Metals from Aqueous Solution Using Licorice Residue-Based Hydrogel Adsorbent. Gels 2023; 9:559. [PMID: 37504438 PMCID: PMC10379308 DOI: 10.3390/gels9070559] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2023] [Revised: 07/05/2023] [Accepted: 07/06/2023] [Indexed: 07/29/2023] Open
Abstract
The removal of heavy metals through adsorption represents a highly promising method. This study focuses on the utilization of an abundant cellulose-rich solid waste, licorice residue (LR), as a natural material for hydrogel synthesis. To this end, LR-EPI hydrogels, namely, LR-EPI-5, LR-EPI-6 and LR-EPI-8, were developed by crosslinking LR with epichlorohydrin (EPI), specifically targeting the removal of Pb, Cu, and Cr from aqueous solutions. Thorough characterizations employing Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy confirmed the successful crosslinking of LR-EPIs by EPI, resulting in the formation of porous and loosely structured hydrogels. Batch studies demonstrated the high efficacy of LR-EPI hydrogels in removing the three heavy metal ions from aqueous solutions. Notably, LR-EPI-8 exhibited the highest adsorption capacity, with maximum capacities of 591.8 mg/g, 458.3 mg/g, and 121.4 mg/g for Pb2+, Cr3+, and Cu2+, respectively. The adsorption processes for Pb2+ and Cu2+ were well described by pseudo-second-order kinetics and the Langmuir model. The adsorption mechanism of LR-EPI-8 onto heavy metal ions was found to involve a combination of ion-exchange and electrostatic interactions, as inferred from the results obtained through X-ray photoelectron spectroscopy and FTIR. This research establishes LR-EPI-8 as a promising adsorbent for the effective removal of heavy metal ions from aqueous solutions, offering an eco-friendly approach for heavy metal removal and providing an environmentally sustainable method for the reutilization of Chinese herb residues. It contributes to the goal of "from waste, treats waste" while also addressing the broader need for heavy metal remediation.
Collapse
Affiliation(s)
- Xiaochun Yin
- Department of Civil Engineering, New Mexico State University, Las Cruces, NM 88003, USA
- School of Public Health, Gansu University of Chinese Medicine, Lanzhou 730000, China
| | - Ting Ke
- School of Public Health, Gansu University of Chinese Medicine, Lanzhou 730000, China
| | - Hai Zhu
- School of Public Health, Gansu University of Chinese Medicine, Lanzhou 730000, China
| | - Pei Xu
- Department of Civil Engineering, New Mexico State University, Las Cruces, NM 88003, USA
| | - Huiyao Wang
- Department of Civil Engineering, New Mexico State University, Las Cruces, NM 88003, USA
| |
Collapse
|
15
|
Ahmadian M, Jaymand M. Interpenetrating polymer network hydrogels for removal of synthetic dyes: A comprehensive review. Coord Chem Rev 2023. [DOI: 10.1016/j.ccr.2023.215152] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/05/2023]
|
16
|
Yan X, Ding J, Shi W, Tang L, Zhang Y, Xu W. Synthesis of Castor Oil-Based Quaternary Ammonium Salt and Modification of Attapulgite for Treating Industrial Wastewaters. MATERIALS (BASEL, SWITZERLAND) 2023; 16:ma16093468. [PMID: 37176350 PMCID: PMC10180249 DOI: 10.3390/ma16093468] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/26/2023] [Revised: 04/27/2023] [Accepted: 04/28/2023] [Indexed: 05/15/2023]
Abstract
In order to develop multifunctional quaternary ammonium salts and explore their advantages as modifiers for wastewater treatment, castor oil-based quaternary ammonium salts were synthesised and subsequently used as modifiers for attapulgite treatment. The structures of untreated and treated attapulgite were compared by Fourier transform infrared spectra and X-ray diffraction. The mechanism of modification was speculated. Various factors such as the amount of modified attapulgite, temperature and pH were also investigated in the batch experiments on the removal rates of acetone and phenol from wastewaters. The synthesis conditions were set as follows: the reaction temperature was 80 °C, the reaction time was 8 h, the molar ratio of castor oil to N,N-dimethyl-1,3-propanediamine was 1:5, the catalyst was 6% NaOH and the product yield was about 64.72%. The grafting rate of the castor oil-based quaternary ammonium salt was about 99.6% when the amount of modifier was 0.69 g per 5 g of attapulgite, the ultrasound treatment time was 11 min and the pH was 5. The quaternary ammonium salt was only associated with the surface of attapulgite and did not change the rod-like crystal structure of the silicate. The modified attapulgite is much more fibrous and exhibits a good distribution of crystal bundles. The removal rates were found to be less favourable under strongly acidic and strongly alkaline conditions. Under suitable conditions, for 50 mL industrial wastewaters (phenol: 100-160 mg/L; acetone: 680-800 mg/L), the amount of modified attapulgite was 1 g, the temperature was 80 °C and the pH was 7, and the maximum removal rates of acetone and phenol after 80 min reached about 65.71% and 78.72%, respectively, which were higher than those of ATP.
Collapse
Affiliation(s)
- Xiuhua Yan
- School of Chemistry and Chemical Engineering, Yancheng Institute of Technology, Yancheng 224051, China
| | - Jianfei Ding
- School of Chemistry and Chemical Engineering, Yancheng Institute of Technology, Yancheng 224051, China
| | - Wenyan Shi
- School of Chemistry and Chemical Engineering, Yancheng Institute of Technology, Yancheng 224051, China
| | - Lanqin Tang
- School of Chemistry and Chemical Engineering, Yancheng Institute of Technology, Yancheng 224051, China
| | - Yidong Zhang
- School of Chemistry and Chemical Engineering, Yancheng Institute of Technology, Yancheng 224051, China
| | - Wei Xu
- School of Chemistry and Chemical Engineering, Yancheng Institute of Technology, Yancheng 224051, China
| |
Collapse
|
17
|
Lizeth Katherine TN, Vendula B, Jaroslav K, Jaroslav C. Structure and Photocatalytic Properties of Ni-, Co-, Cu-, and Fe-Doped TiO 2 Aerogels. Gels 2023; 9:gels9050357. [PMID: 37232949 DOI: 10.3390/gels9050357] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2023] [Revised: 04/19/2023] [Accepted: 04/20/2023] [Indexed: 05/27/2023] Open
Abstract
TiO2 aerogels doped with Ni, Co, Cu, and Fe were prepared, and their structure and photocatalytic activity during the decomposition of a model pollutant, acid orange (AO7), were studied. After calcination at 500 °C and 900 °C, the structure and composition of the doped aerogels were evaluated and analyzed. XRD analysis revealed the presence of anatase/brookite and rutile phases in the aerogels along with other oxide phases from the dopants. SEM and TEM microscopy showed the nanostructure of the aerogels, and BET analysis showed their mesoporosity and high specific surface area of 130 to 160 m2·g-1. SEM-EDS, STEM-EDS, XPS, EPR methods and FTIR analysis evaluated the presence of dopants and their chemical state. The concentration of doped metals in aerogels varied from 1 to 5 wt.%. The photocatalytic activity was evaluated using UV spectrophotometry and photodegradation of the AO7 pollutant. Ni-TiO2 and Cu-TiO2 aerogels calcined at 500 °C showed higher photoactivity coefficients (kaap) than aerogels calcined at 900 °C, which were ten times less active due to the transformation of anatase and brookite to the rutile phase and the loss of textural properties of the aerogels.
Collapse
Affiliation(s)
- Tinoco Navarro Lizeth Katherine
- CEITEC-Central European Institute of Technology, Brno University of Technology, Purkynova 656/123, 612 00 Brno, Czech Republic
| | - Bednarikova Vendula
- CEITEC-Central European Institute of Technology, Brno University of Technology, Purkynova 656/123, 612 00 Brno, Czech Republic
| | - Kastyl Jaroslav
- CEITEC-Central European Institute of Technology, Brno University of Technology, Purkynova 656/123, 612 00 Brno, Czech Republic
| | - Cihlar Jaroslav
- CEITEC-Central European Institute of Technology, Brno University of Technology, Purkynova 656/123, 612 00 Brno, Czech Republic
- Institute of Materials Science and Engineering, Brno University of Technology, Technicka 2, 616 69 Brno, Czech Republic
| |
Collapse
|
18
|
Vaiano V, De Marco I. Removal of Azo Dyes from Wastewater through Heterogeneous Photocatalysis and Supercritical Water Oxidation. SEPARATIONS 2023. [DOI: 10.3390/separations10040230] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/29/2023] Open
Abstract
Azo dyes are synthetic organic dyes used in the textile, leather, and paper industries. They pose environmental problems due to their toxic and persistent nature. The toxicity is due to the presence of azo groups in the dye molecule that can break down into aromatic amines, which are highly toxic to aquatic organisms and humans. Various treatment methods have been developed to remove azo dyes from wastewater. Conventional wastewater treatments have some drawbacks, such as high operating costs, long processing times, generation of sludge, and the formation of toxic by-products. For these reasons, a valid alternative is constituted by advanced oxidation processes. Good results have been obtained using heterogeneous photocatalysis and supercritical water oxidation. In the former method, a photocatalyst is in contact with wastewater, a suitable light activates the catalyst, and generated reactive oxygen species that react with pollutants through oxidative reactions to their complete mineralization; the latter involves pressurizing and heating wastewater to supercritical conditions in a reactor vessel, adding an oxidizing agent to the supercritical water, and allowing the mixture to react. In this review paper, works in the literature that deal with processing wastewater containing azo dyes through photocatalysts immobilized on macroscopic supports (structured photocatalysts) and the supercritical water oxidation technique have been critically analyzed. In particular, advancement in the formulation of structured photocatalysts for the degradation of azo dyes has been shown, underlying different important features, such as the type of support for the photoactive phase, reactor configuration, and photocatalytic efficiency in terms of dye degradation and photocatalyst stability. In the case of supercritical water oxidation, the main results regarding COD and TOC removal from wastewater containing azo dyes have been reported, taking into account the reactor type, operating pressure, and temperature, as well as the reaction time.
Collapse
|
19
|
Parale VG, Choi H, Kim T, Phadtare VD, Dhavale RP, Lee KY, Panda A, Park HH. One pot synthesis of hybrid silica aerogels with improved mechanical properties and heavy metal adsorption: Synergistic effect of in situ epoxy-thiol polymerization and sol-gel process. Sep Purif Technol 2023. [DOI: 10.1016/j.seppur.2022.122934] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
|
20
|
Qiu M, Xu W, Chen S, Jia Z, Li Y, He J, Wang L, Lei J, Liu C, Liu J. A novel adsorptive and photocatalytic system for dye degradation using ZIF-8 derived carbon (ZIF-C)-modified graphene oxide nanosheets. J Taiwan Inst Chem Eng 2023. [DOI: 10.1016/j.jtice.2023.104674] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/21/2023]
|
21
|
Fan K, Chen Q, Zhao J, Liu Y. Preparation of MnO 2-Carbon Materials and Their Applications in Photocatalytic Water Treatment. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:541. [PMID: 36770501 PMCID: PMC9921467 DOI: 10.3390/nano13030541] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/31/2022] [Revised: 01/17/2023] [Accepted: 01/23/2023] [Indexed: 06/18/2023]
Abstract
Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO2 was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO2 could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO2-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO2-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO2 and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO2-carbon materials in the field of environmental applications.
Collapse
Affiliation(s)
- Kun Fan
- Chinese Research Academy of Environment Sciences, Beijing 100012, China
| | - Qing Chen
- Chinese Research Academy of Environment Sciences, Beijing 100012, China
- Ecological and Environmental Protection Company, China South-to-North Water Diversion Corporation Limited, Beijing 100036, China
| | - Jian Zhao
- Chinese Research Academy of Environment Sciences, Beijing 100012, China
| | - Yue Liu
- Chinese Research Academy of Environment Sciences, Beijing 100012, China
| |
Collapse
|
22
|
Synthesis and Characterization of Terbium-Based Metal Organic Framework for Environmental Remediation Application. Catalysts 2023. [DOI: 10.3390/catal13020241] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023] Open
Abstract
In the present study, terbium-based metal-organic frameworks (MOFs) based on fcu topology, fcu-Tb- FTZB-MOF, was synthesized using 2-fluoro-4-(1H-tetrazol-5-yl)benzoic acid (FTZB) as a linear ligand, and then was characterized using powder X-ray diffraction (PXRD) and Brunauer-Emmett-Teller (BET) analysis and to study the texture properties of the Tb-FTZB-MOF. The characterization results confirmed the successful synthesis of the high surface area Tb-FTZB-MOF (1220 m2/g). The synthesized Tb-FTZB-MOF was then applied as a catalytic adsorbent to remove direct violet 31 (DV31) dye as an example of organic pollutants, from a model and real solution. The effect of various operational parameters such as adsorbent loading, contact time, initial DV31 dye concentration, initial solution pH, different water matrix, temperature, and ionic strength have also been evaluated. Solution pH and temperature significantly influenced the adsorption of DV31 dye using Tb-FTZB-MOF, and the results should efficiently remove the DV31 dye at ambient temperature, and at pH value of 8.0 using 35 mg Tb-FTZB-MOF, within few minutes. The process was studied kinetically and found to follow the pseudo-second-order kinetic model, and thermodynamically the process was spontaneous, endothermic, with a positive entropy. Finally, the result showed that Tb-FTZB-MOF was able to adsorb a high percentage of DV31 dye and maintained reasonable efficiency even after five cycles, indicating that Tb-FTZB-MOF could be a promising adsorbent in wastewater remediation.
Collapse
|
23
|
Thurakkal L, Cheekatla SR, Porel M. Superfast Capture of Iodine from Air, Water, and Organic Solvent by Potential Dithiocarbamate-Based Organic Polymer. Int J Mol Sci 2023; 24:ijms24021466. [PMID: 36674984 PMCID: PMC9861013 DOI: 10.3390/ijms24021466] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/27/2022] [Revised: 12/17/2022] [Accepted: 12/26/2022] [Indexed: 01/14/2023] Open
Abstract
Organic polymers are widely explored due to their high stability, scalability, and more facile modification properties. We developed cost-effective dithiocarbamate-based organic polymers synthesized using diamides, carbon disulfide, and diamines to apply for environmental remediation. The sequestration of radioiodine is a serious concern to tackle when dealing with nuclear power for energy requirements. However, many of the current sorbents have the problem of slower adsorption for removing iodine. In this report, we discuss the utilization of an electron-rich dithiocarbamate-based organic polymer for the removal of iodine in a very short time and with high uptake. Our material showed 2.8 g/g uptake of vapor iodine in 1 h, 915.19 mg/g uptake of iodine from cyclohexane within 5 s, 93% removal of saturated iodine from water in 1 min, and 1250 mg/g uptake of triiodide ions from water within 30 s. To the best of our knowledge, the iodine capture was faster than previously observed for any existing material. The material was fully recyclable when applied for up to four cycles. Hence, this dithiocarbamate-based polymer can be a promising system for the fast removal of various forms of iodine and, thus, enhance environmental security.
Collapse
Affiliation(s)
- Liya Thurakkal
- Department of Chemistry, Indian Institute of Technology Palakkad, Palakkad 678557, India
| | - Subba Rao Cheekatla
- Department of Chemistry, Indian Institute of Technology Palakkad, Palakkad 678557, India
| | - Mintu Porel
- Department of Chemistry, Indian Institute of Technology Palakkad, Palakkad 678557, India
- Environmental Sciences and Sustainable Engineering Center, Indian Institute of Technology Palakkad, Palakkad 678557, India
- Correspondence:
| |
Collapse
|
24
|
Engineering a low-cost diatomite with Zn-Mg-Al Layered triple hydroxide (LTH) adsorbents for the effectual removal of Congo red: Studies on batch adsorption, mechanism, high selectivity, and desorption. Colloids Surf A Physicochem Eng Asp 2023. [DOI: 10.1016/j.colsurfa.2023.130922] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
|
25
|
Qaiyum MA, Sahu PR, Samal PP, Dutta S, Dey B, Dey S. Towards a win-win chemistry: extraction of C.I. orange from Kamala fruit ( Mallotus philippensis), and simultaneous exercise of its peels for the removal of Methylene Blue from water. INTERNATIONAL JOURNAL OF PHYTOREMEDIATION 2023; 25:907-916. [PMID: 36111428 DOI: 10.1080/15226514.2022.2119936] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/12/2023]
Abstract
Kamala fruit (Mallotus philippensis), hereinafter MP, has been simultaneously exercised for the extraction of a natural dye, C.I. orange and its peels were converted into an efficient adsorbent for the rapid removal of methylene blue (MB) dye from aqueous solutions. The material has been characterized by Fourier Transform Infra-red (FTIR),Field Emission Scanning Electron Microscopy- Electron dispersive spectroscopy (FESEM-EDS), Brunauer-Emmett-Teller (BET) surface area, and pHZPC. FTIR suggests the presence of polyphenolic moieties responsible for adsorption, whereas FESEM confirms the porous texture. Optimization of process variables such as contact time, pH, adsorbent dose, and temperature of operation indicates that the adsorption gets modulated by the pH, with a best at 11. The Freundlich model (R2 = 0.994), and pseudo-second-order kinetics (R2 = 0.999) best describe the adsorption pathway. Dilute hydrochloric acid is sufficient to induce >66% regeneration, which ensures reusability. With the maximal uptake for MB is 30.2 mg/g at ambient conditions, the superiority over the existing materials has been confirmed. Treatment of dye containing industrial effluent suggests about a 50% reduction in one cycle. It can be concluded that both-way benefits, namely natural dye extraction and preparation of a peel-based adsorbent for methylene blue removal from aqueous solution, can be achieved using the kamala fruit peels.
Collapse
Affiliation(s)
- Md Atif Qaiyum
- Department of Chemistry, Central University of Jharkhand, Ranchi, India
| | | | | | - Subhashri Dutta
- Department of Chemistry, Central University of Jharkhand, Ranchi, India
| | - Banashree Dey
- Department of Chemistry, The Graduate School College for Women, Jamshedpur, India
| | - Soumen Dey
- Department of Chemistry, Central University of Jharkhand, Ranchi, India
| |
Collapse
|
26
|
Abdulhamid MA, Muzamil K. Recent progress on electrospun nanofibrous polymer membranes for water and air purification: A review. CHEMOSPHERE 2023; 310:136886. [PMID: 36265699 DOI: 10.1016/j.chemosphere.2022.136886] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/28/2022] [Revised: 09/29/2022] [Accepted: 10/11/2022] [Indexed: 06/16/2023]
Abstract
Developing new polymer membranes with excellent thermal, mechanical, and chemical stability has shown great potential for various environmental remediation applications such as wastewater treatment and air filtration. Polymer membranes have been widely investigated over the past years and utilized to overcome severe ecological issues. Membrane-based technologies play a critical role in water purification and air filtration with the ability to act efficiently and sustainably. Electrospun nanofiber membranes have displayed excellent performance in removing various contaminants from water, such as bacteria, dyes, heavy metals, and oil. These nanofibrous membranes have shown good potential to filter the air from tiny particles, volatile organic compounds, and toxic gases. The performance of polymer membranes can be enhanced by fine-tuning polymer structure, varying surface properties, and strengthening overall membrane porosity. In this review, we discuss the involvement of electrospun nanofibrous membranes in different environmental remediation applications. It further reviews the recent progress of polymer membrane development by utilizing nanoparticles and naturally occurring polymers.
Collapse
Affiliation(s)
- Mahmoud A Abdulhamid
- Sustainable and Resilient Materials Lab, Center for Integrative Petroleum Research (CIPR), College of Petroleum Engineering and Geosciences (CPG), King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, 31261, Saudi Arabia.
| | - Khatri Muzamil
- Nano Fusion Technology Research Lab, Division of Frontier Fibers, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster of Cutting-Edge Research (ICCER), Shishu University, Tokida 3-15-1, Ueda, 386-8567, Japan
| |
Collapse
|
27
|
Chai B, Zhang W, Liu Y, Zhu S, Gu Z, Zhang H. Progress in Research and Application of Graphene Aerogel-A Bibliometric Analysis. MATERIALS (BASEL, SWITZERLAND) 2022; 16:272. [PMID: 36614611 PMCID: PMC9822319 DOI: 10.3390/ma16010272] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/18/2022] [Revised: 12/13/2022] [Accepted: 12/14/2022] [Indexed: 06/17/2023]
Abstract
In recent years, graphene aerogel (GA) has been widely used as a 3D porous stable network structure material. In order to identify the main research direction of GA, we use the bibliometric method to analyze its hot research fields and applications from the Web of Science database. First, we collected all relevant literature and analyzed its bibliometrics of publication year, country, institution, etc., where we found that China and Chinese Academy of Sciences are the most productive country and institute, respectively. Then, the three hot fields of fabrication, energy storage, and environmental protection are identified and thoroughly discussed. Graphene aerogel composite electrodes have achieved very efficient storage capacity and charge/discharge stability, especially in the field of electrochemical energy storage. Finally, the current challenges and the future development trends are presented in the conclusion. This paper provides a new perspective to explore and promote the related development of GA.
Collapse
Affiliation(s)
- Bowen Chai
- CAS Key Laboratory for Biomedical Effects of Nanomaterials and Nanosafety, Institute of High Energy Physics, Beijing 100049, China
- School of Science, China University of Geosciences, Beijing 100083, China
| | - Wanlin Zhang
- Aerospace Research Institute of Special Material and Processing Technology, Beijing 100074, China
| | - Yuanyuan Liu
- Aerospace Research Institute of Special Material and Processing Technology, Beijing 100074, China
| | - Shuang Zhu
- CAS Key Laboratory for Biomedical Effects of Nanomaterials and Nanosafety, Institute of High Energy Physics, Beijing 100049, China
- CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology of China, Chinese Academy of Sciences, Beijing 100190, China
- Center of Materials Science and Optoelectronics Engineering, College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Zhanjun Gu
- CAS Key Laboratory for Biomedical Effects of Nanomaterials and Nanosafety, Institute of High Energy Physics, Beijing 100049, China
- Center of Materials Science and Optoelectronics Engineering, College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Hao Zhang
- Aerospace Research Institute of Special Material and Processing Technology, Beijing 100074, China
| |
Collapse
|
28
|
Abouzeid RE, Khiari R, Ali KA. Activated Charcoal/Alginate Nanocomposite Beads for Efficient Adsorption of the Cationic Dye Methylene Blue: Kinetics and Equilibrium. CHEMISTRY AFRICA 2022. [DOI: 10.1007/s42250-022-00560-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
29
|
Haspulat Taymaz B, Demir M, Kamış H, Orhan H, Aydoğan Z, Akıllı A. Facile and green synthesis of ZnO nanoparticles for effective photocatalytic degradation of organic dyes and real textile wastewater. INTERNATIONAL JOURNAL OF PHYTOREMEDIATION 2022:1-12. [PMID: 36437748 DOI: 10.1080/15226514.2022.2150142] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Remediation of organic dyes from wastewater in textile industries is a big challenge to decreasing water pollution. This study was aimed at the preparation of ZnO nanoparticles (NPs) and their application as a photocatalyst for the degradation of methylene blue (MB), sunfix red (SR) and real textile wastewater (RTW) under both UV and visible irradiations. The ZnO NPs were synthesized with a green Thymus vulgaris leaf extract-supported approach following the calcination process. 50 mg L-1 MB and 50 mg L-1 SR dyes were completely photodegrade under UV irradiation after only 20 and 45 minutes, respectively, in the presence of 1.0 mg/mL ZnO NPs. When they are exposed to visible light, the degradation efficiency reached 91 and 75% within 60 and 120 min, respectively. Photocatalytic measurements of RTW depict that 95% (within 60 min under UV illumination) and 79% (within 90 min under visible illumination) were degraded, respectively. The enhanced photodegradation can be attributed to the narrowing of the bandgap of the ZnO NPs, high crystallinity and nearly hexagonal morphology with an average size of 20-30 nm. The present results show that ZnO NPs could potentially be applied for high-efficiency degradation of organic dyes and RTW under both UV and visible light irradiation.
Collapse
Affiliation(s)
| | - Muslum Demir
- Department of Chemical Engineering, Osmaniye Korkut Ata University, Osmaniye, Türkiye
| | - Handan Kamış
- Department of Chemical Engineering, Konya Technical University, Konya, Türkiye
| | - Hüseyin Orhan
- Department of Chemical Engineering, Konya Technical University, Konya, Türkiye
| | - Zuhal Aydoğan
- Department of Chemical Engineering, Konya Technical University, Konya, Türkiye
| | - Aleyna Akıllı
- Department of Chemical Engineering, Konya Technical University, Konya, Türkiye
| |
Collapse
|
30
|
Verástegui-Domínguez LH, Elizondo-Villarreal N, Martínez-Delgado DI, Gracia-Pinilla MÁ. Eco-Friendly Reduction of Graphene Oxide by Aqueous Extracts for Photocatalysis Applications. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:3882. [PMID: 36364657 PMCID: PMC9655637 DOI: 10.3390/nano12213882] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/21/2022] [Revised: 10/24/2022] [Accepted: 10/25/2022] [Indexed: 06/16/2023]
Abstract
In the present work, reduced graphene oxide was obtained by green synthesis, using extracts of Larrea tridentata (gobernadora) and Capsicum Chinense (habanero). Graphene oxide was synthesized by the modified Hummers' method and subsequently reduced using natural extracts to obtain a stable and environmentally friendly graphene precursor. Consequently, the gobernadora aqueous extract was found to have a better reducing power than the habanero aqueous extract. This opportunity for green synthesis allows the application of RGO in photocatalysis for the degradation of the methylene blue dye. Degradation efficiencies of 60% and 90% were obtained with these materials.
Collapse
Affiliation(s)
- Luz H. Verástegui-Domínguez
- Materiales Nanoestructurados (CICFIM), Facultad de Ciencias Físico Matemáticas (FCFM), Universidad Autónoma de Nuevo León (UANL), 66450 San Nicolás de los Garza, N.L., Mexico
| | - Nora Elizondo-Villarreal
- Materiales Nanoestructurados (CICFIM), Facultad de Ciencias Físico Matemáticas (FCFM), Universidad Autónoma de Nuevo León (UANL), 66450 San Nicolás de los Garza, N.L., Mexico
| | - Dora Irma Martínez-Delgado
- Materiales Nanoestructurados (CICFIM), Facultad de Ciencias Físico Matemáticas (FCFM), Universidad Autónoma de Nuevo León (UANL), 66450 San Nicolás de los Garza, N.L., Mexico
| | - Miguel Ángel Gracia-Pinilla
- Materiales Nanoestructurados (CICFIM), Facultad de Ciencias Físico Matemáticas (FCFM), Universidad Autónoma de Nuevo León (UANL), 66450 San Nicolás de los Garza, N.L., Mexico
- Mesoscale Chemical Systems, MESA+ Institute, University of Twente, P.O. Box 217, 7500AE Enschede, The Netherlands
| |
Collapse
|
31
|
Nguyen LTT, Nguyen HTT, Nguyen LTH, Duong ATT, Nguyen HQ, Bui ND, Ngo VTM, Nguyen DTC, Tran TV. Toward enhanced visible-light photocatalytic dye degradation and reusability of La 3+ substituted ZnFe 2O 4 nanostructures. ENVIRONMENTAL RESEARCH 2022; 214:114130. [PMID: 35998691 DOI: 10.1016/j.envres.2022.114130] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/05/2022] [Revised: 07/27/2022] [Accepted: 08/15/2022] [Indexed: 06/15/2023]
Abstract
The present work focused on the synthesis of novel ZnLaxFe2-xO4 catalysts (x = 0, 0.01, 0.03, 0.05) and their utilization for the photocatalytic degradation of Rhodamine B dye. Structurally, the band gap energy of the catalysts tended to decrease (1.94-1.70 eV) with increasing the amount of La3+ dopant. ZnLa0.05Fe1.95O4 had an average particle size (40 nm), high surface area (41.07 m2 g-1) and large pore volume (0.186 cm3 g-1). Moreover, the effect of doping ratio, reaction time, H2O2 concentration, catalyst loading on the treatment performance of La3+ substituted ZnFe2O4 nanocomposites was investigated. ZnLa0.05Fe1.95O4/H2O2 system exhibited the highest degradation efficiency of 99.5% and nonlinear pseudo first-order kinetic reaction rate (14.8 × 10-3 min-1) in the presence of visible light irradiation. The key role of reactive oxygen species involving •O2- and •OH radicals was well explained through the scavenger study. A plausible mechanism of the degradation of Rhodamine B dye was also proposed. Due to two advantageous points including high recyclability (up to 4 cycles) and stability, La3+ substituted ZnFe2O4 nanocomposites can be an effective and competitive catalyst for the visible light-driven photodegradation of toxic dyes in the real wastewaters.
Collapse
Affiliation(s)
- Loan T T Nguyen
- Faculty of Chemistry, Thai Nguyen University of Education, Thai Nguyen, 240000, Viet Nam
| | - Hang T T Nguyen
- Faculty of Fundamental Sciences, Thai Nguyen University of Technology, Thai Nguyen, 24000, Viet Nam
| | - Lan T H Nguyen
- Faculty of Chemistry, Thai Nguyen University of Education, Thai Nguyen, 240000, Viet Nam
| | - Anh T T Duong
- Faculty of Chemistry, Thai Nguyen University of Education, Thai Nguyen, 240000, Viet Nam
| | - Hai Q Nguyen
- Faculty of Chemistry, Thai Nguyen University of Education, Thai Nguyen, 240000, Viet Nam
| | - Nguyen D Bui
- Faculty of Chemistry, Thai Nguyen University of Education, Thai Nguyen, 240000, Viet Nam
| | - Viet T M Ngo
- Faculty of Chemistry, Thai Nguyen University of Education, Thai Nguyen, 240000, Viet Nam
| | - Duyen Thi Cam Nguyen
- Institute of Applied Technology and Sustainable Development, Nguyen Tat Thanh University, 298-300A Nguyen Tat Thanh, District 4, Ho Chi Minh City, 755414, Viet Nam; Faculty of Environmental and Food Engineering, Nguyen Tat Thanh University, 298-300A Nguyen Tat Thanh, District 4, Ho Chi Minh City, 755414, Viet Nam
| | - Thuan Van Tran
- Institute of Applied Technology and Sustainable Development, Nguyen Tat Thanh University, 298-300A Nguyen Tat Thanh, District 4, Ho Chi Minh City, 755414, Viet Nam; Faculty of Environmental and Food Engineering, Nguyen Tat Thanh University, 298-300A Nguyen Tat Thanh, District 4, Ho Chi Minh City, 755414, Viet Nam.
| |
Collapse
|
32
|
Nourzad M, Dehghan A, Niazi Z, Giannakoudakis DA, Afsharnia M, Barczak M, Anastopoulos I, Triantafyllidis K, Shams M. Low power photo-assisted catalytic degradation of azo dyes using 1-D BiOI: Optimization of the key physicochemical features. CATAL COMMUN 2022. [DOI: 10.1016/j.catcom.2022.106567] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022] Open
|
33
|
Saravanan A, Kumar PS, Rangasamy G. Removal of Toxic Pollutants from Industrial Effluent: Sustainable Approach and Recent Advances in Metal Organic Framework. Ind Eng Chem Res 2022. [DOI: 10.1021/acs.iecr.2c02945] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/17/2023]
Affiliation(s)
- Anbalagan Saravanan
- Department of Sustainable Engineering, Institute of Biotechnology, Saveetha School of Engineering, SIMATS, Chennai−602105, India
| | - Ponnusamy Senthil Kumar
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai−603110, India
- Centre of Excellence in Water Research (CEWAR), Sri Sivasubramaniya Nadar College of Engineering, Chennai−603110, India
| | - Gayathri Rangasamy
- University Centre for Research and Development & Department of Civil Engineering, Chandigarh University, Gharuan, Mohali, Punjab−140413, India
| |
Collapse
|
34
|
Keerthana SP, Kowsalya K, Kumar PS, Yuvakkumar R, Kungumadevi L, Ravi G, Velauthapillai D. Effect of grinding time on bismuth oxyhalides optical and morphological properties influence on photocatalytic removal of organic dye. CHEMOSPHERE 2022; 304:135272. [PMID: 35688190 DOI: 10.1016/j.chemosphere.2022.135272] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/19/2022] [Revised: 05/20/2022] [Accepted: 06/05/2022] [Indexed: 06/15/2023]
Abstract
Herein, we reported the synthesis of BiOX (X = Cl, Br) with different grinding time like 15 min and 30 min to analyze the evolution of physiochemical properties and the morphological evolution. The structural, optical, vibrational properties were examined by standard characterization studies. The formation of bismuth oxyhalides were confirmed by XRD and Raman studies. The crystallite size was decreased as in 30 min grinded sample whereas there is an influence of crystal structure. BiOCl (15 and 30 min) samples expelled the nanoflake like structure with the flakes arranged to form a nanoflower morphology. On comparing BiOCl (15 min), there is high orientation of nanoflakes on BiOCl (30 min) sample. As explored in BiOBr (15 and 30 min) samples, the development of nanoplates were found. The growth of nanoplates was enhanced in the better way in BiOBr (30 min) than BiOBr (15 min). The grinding time has explored a great influence on morphology. The photocatalyst test for prepared photocatalysts was performed to reduce the RhB dye. The photocatalysts showed 74%, 97%, 98% and 99.8% for BiOCl (15 min), BiOCl (30 min), BiOBr (15 min) and BiOBr (30 min). The rate constant value obtained was 0.008, 0.011, 0.021, 0.033 and 0.068 min-1. BiOBr (30 min) sample achieved higher rate constant value. The hierarchical nanostructures and narrow bandgap has made the samples to be a potential candidate to reduce the toxic pollutants with complete efficiency.
Collapse
Affiliation(s)
- S P Keerthana
- Department of Physics, Alagappa University, Karaikudi, 630 003, Tamil Nadu, India
| | - K Kowsalya
- Department of Physics, Mother Teresa Women's University, Kodaikanal, India
| | - P Senthil Kumar
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, 603110, India; Centre of Excellence in Water Research (CEWAR), Sri Sivasubramaniya Nadar College of Engineering, Chennai, 603110, India.
| | - R Yuvakkumar
- Department of Physics, Alagappa University, Karaikudi, 630 003, Tamil Nadu, India.
| | - L Kungumadevi
- Department of Physics, Mother Teresa Women's University, Kodaikanal, India
| | - G Ravi
- Department of Physics, Alagappa University, Karaikudi, 630 003, Tamil Nadu, India
| | - Dhayalan Velauthapillai
- Faculty of Engineering and Science, Western Norway University of Applied Sciences, Bergen, 5063, Norway
| |
Collapse
|
35
|
Aal E Ali RS, Zhou Y, Gong K, Jiang X. Parallel photoreactor development with enhanced photon efficiency and reproducibility based on laws of optics. GREEN SYNTHESIS AND CATALYSIS 2022. [DOI: 10.1016/j.gresc.2022.10.007] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022] Open
|
36
|
Mohammadi AA, Niazi Z, Heidari K, Afarinandeh A, Samadi Kazemi M, Haghighat GA, Vasseghian Y, Rezania S, Barghi A. Nickel and iron-based metal-organic frameworks for removal of organic and inorganic model contaminants. ENVIRONMENTAL RESEARCH 2022; 212:113164. [PMID: 35398078 DOI: 10.1016/j.envres.2022.113164] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/15/2022] [Revised: 03/17/2022] [Accepted: 03/21/2022] [Indexed: 06/14/2023]
Abstract
Metal-organic frameworks (MOFs) are a promising class of porous nanomaterials in the field of environmental remediation. Ni-MOF and Fe-MOF were chosen for their advantages such as structural robustness and ease of synthesis route. The structure of prepared MOFs was characterized using FE-SEM, XRD, FTIR, and N2 adsorption-desorption. The efficiency of MOFs to remove organic model contaminants (anionic Alizarin Red S (ARS) and cationic malachite green (MG) and inorganic fluoride was studied. Fe-MOF and Ni-MOF adsorbed 67, 88, 6% and 32, 5, and 9% of fluoride, ARS, and MG, respectively. Further study on ARS adsorption by Fe-MOF showed that the removal efficiency was high in a wide range of pH from 3 to 9. Moreover, dye removal was directly increased by adsorbent mass (0.1-0.75 g/L) and decreased by ARS concentration (25-100 mg/L). The pseudo-first-order kinetic model and Langmuir isotherm model with a qmax of 176.68 mg/g described the experimental data well. The separation factor, KL, was in the range of 0-1, which means the adsorption process was favorable. In conclusion, Fe-MOF showed remarkable adsorption of organic and inorganic model contaminants.
Collapse
Affiliation(s)
- Ali Akbar Mohammadi
- Department of Environmental Health Engineering, Neyshabur University of Medical Sciences, Neyshabur, Iran
| | - Zohreh Niazi
- Chemistry Department, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, 9177948974, Iran
| | - Kambiz Heidari
- Department of Chemical Engineering, Payame Noor University, Tehran, Iran
| | - Amir Afarinandeh
- Department of Chemical Engineering, Payame Noor University, Tehran, Iran
| | - Malihe Samadi Kazemi
- Department of Chemistry, Faculty of Sciences, Bojnourd Branch, Islamic Azad University, Bojnourd, Iran
| | - Gholam Ali Haghighat
- Department of Environmental Health Engineering, School of Health, Jiroft University of Medical Sciences, Jiroft, Iran.
| | - Yasser Vasseghian
- Department of Chemistry, Soongsil University, Seoul, 06978, South Korea; The University of Johannesburg, Department of Chemical Engineering, P.O. Box 17011, Doornfontein 2088, South Africa
| | - Shahabaldin Rezania
- Department of Environment and Energy, Sejong University, Seoul, 05006, South Korea.
| | - Anahita Barghi
- Department of Molecular Genetics, Dong-A University, Busan, 4915, South Korea
| |
Collapse
|
37
|
Photocatalytic degradation of methylene blue, rhodamine B, methyl orange and Eriochrome black T dyes by modified ZnO nanocatalysts: A concise review. INORG CHEM COMMUN 2022. [DOI: 10.1016/j.inoche.2022.109764] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
|
38
|
Moawed EA, Kiwaan HA, El-Zakzouk SK, El-Sonbati MA, El-Zahed MM. Chemical recycling of polyurethane foam waste and application for antibacterial and removal of anionic and cationic dyes. BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING 2022. [DOI: 10.1007/s43153-022-00258-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
Abstract
AbstractThe large amounts of polyurethane foam wastes (PUFWs) produced in the automobiles, buildings, and furniture industries cause many environmental problems. Therefore, the recycling of PUFWs has acquired great interest worldwide. In this study, the PUFWs were converted to new nanocomposite. The chemical modification of PUFWs was conducted through reflux with potassium permanganate in 0.1 M H2SO4. The produced PUF-COO@MnO2 nanocomposites was characterized by scanning electron microscope, energy-dispersive X-ray spectrometry, X-ray diffraction, and Magnetic susceptibility. PUF-COO@MnO2 has been used for the removal of cationic (Methylene blue) and anionic (Trypan blue) dyes from industrial wastewater. The antibacterial effect of PUF-COO@MnO2 was also examined against Gram-positive and Gram-negative bacterial strains. The adsorption capacities of PUF-COO@MnO2 for tested dyes were 277 and 269 mg/g. Moreover, PUF-COO@MnO2 showed a potent antibacterial action against B. cereus (8.8 mm) followed by S. aureus (7.5 mm) and E. coli (7.1 mm). It was concluded that PUF-COO@MnO2 can be employed as antibacterial low-cost material and for the removal of synthetic dyes from industrial effluents.
Collapse
|
39
|
Priyanka U, Lens PNL. Light driven Aspergillus niger-ZnS nanobiohybrids for degradation of methyl orange. CHEMOSPHERE 2022; 298:134162. [PMID: 35302000 DOI: 10.1016/j.chemosphere.2022.134162] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/16/2021] [Revised: 02/21/2022] [Accepted: 02/26/2022] [Indexed: 06/14/2023]
Abstract
Inorganic-microbial hybrid systems have potential to be sustainable, efficient and versatile chemical synthesis platforms by integrating the light-harvesting properties of semiconductors with microbial cells. Here, we demonstrate light-driven photocatalytic semiconducting Aspergillus niger cells-ZnS nanoparticles for enhanced removal of the dye methyl orange. Chemically synthesized ZnS nanoparticles exhibited a zinc blende pattern in X-ray diffraction, had a dimension of 20-90 nm with a band gap (Ebg) of 3.4 eV at 1.83 × 1018 photons/second. Biologically synthesized ZnS nanoparticles of 40-90 nm showed a hexagonal pattern in the X-ray powder diffraction spectra with an Ebg 3.7 eV at 1.68 × 1018 photons/second. At a methyl orange (MO) concentration of 100 mg/L, dosage of 0.5 × 105 mol catalyst and pH 4, a 97.5% and 98% removal efficiency of MO was achieved in 90 min and 60 min for, respectively, chemically and biologically synthesized ZnS nanobiohybrids in the presence of UV-A light. The major degradation products of photocatalysis for chemically synthesized ZnS nanobiohybrids were naphtholate (C10H7O m/z 143) and hydroquinone (C9H5m/z 113). For the biologically synthesized ZnS nanobiohybrids, the degradation products were hydroquinone (C9H5m/z 113) and 2-phenylphenol (C12H10O m/z 170).
Collapse
Affiliation(s)
| | - Piet N L Lens
- National University of Ireland, University Road, Galway, Ireland.
| |
Collapse
|
40
|
Nadolska M, Szkoda M, Trzciński K, Niedziałkowski P, Ryl J, Mielewczyk-Gryń A, Górnicka K, Prześniak-Welenc M. Insight into Potassium Vanadates as Visible-Light-Driven Photocatalysts: Synthesis of V(IV)-Rich Nano/Microstructures for the Photodegradation of Methylene Blue. Inorg Chem 2022; 61:9433-9444. [PMID: 35686953 PMCID: PMC9241143 DOI: 10.1021/acs.inorgchem.2c00136] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
![]()
Photocatalysis is
regarded as a promising tool for wastewater remediation.
In recent years, many studies have focused on investigating novel
photocatalysts driven by visible light. In this study, K2V6O16·nH2O
nanobelts and KV3O8 microplatelets were synthesized
and investigated as photocatalysts. Samples were obtained via the
facile method based on liquid-phase exfoliation with ion exchange.
By changing the synthesis temperature (20–80 °C), different
compositions, morphologies, and V4+/V5+ ratios
were obtained and investigated as photocatalysts for organic dye degradation.
Potassium vanadates’ structural, morphological, and optical
properties were characterized using X-ray diffraction(XRD), Fourier
transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy
(XPS), Physical Property Measurement System (PPMS), thermogravimetric
analysis (TGA) with mass spectrometry (MS), N2 adsorption,
scanning electron microscopy (SEM), photoluminescence (PL), and UV–vis
diffuse reflectance spectroscopy (DRS). Synthesized K2V6O16·nH2O and KV3O8 showed an efficient absorption in the visible
wavelength region with a narrow band gap energy of 1.80 and 1.91 eV,
respectively. Their photocatalytic activity was evaluated by the degradation
of methylene blue (MB) under simulated solar light illumination. The
KV3O8 microplatelets exhibited the greatest
photocatalytic activity, resulting in more than 90% degradation of
the dye within the first 30 min. It is suggested that the observed
excellent photocatalytic performance is attributed to the high content
of V4+ species. Furthermore, the influence of active species
was investigated, and the mechanism responsible for the photodegradation
of the MB dye was discussed for the first time for potassium vanadates. Potassium vanadates were synthesized
via the facile method
based on liquid-phase exfoliation with ion exchange. Different synthesis
temperatures (20−80 °C) resulted in various phase compositions,
morphologies, and V4+/V5+ ratios. The obtained
samples were demonstrated as efficient visible-light driven photocatalysts,
resulting in more than 90% degradation of methylene blue within the
first 30−60 min. The enhanced photoactivity is attributed to
the high content of V4+ species, which are beneficial for
the separation of photogenerated electrons and holes and their lifetime.
Collapse
Affiliation(s)
- Małgorzata Nadolska
- Faculty of Applied Physics and Mathematics, Institute of Nanotechnology and Materials Engineering, Gdansk University of Technology, Narutowicza 11/12, Gdansk 80-233, Poland
| | - Mariusz Szkoda
- Faculty of Chemistry, Gdansk University of Technology, Narutowicza11/12, Gdansk 80-233, Poland
| | - Konrad Trzciński
- Faculty of Chemistry, Gdansk University of Technology, Narutowicza11/12, Gdansk 80-233, Poland
| | - Paweł Niedziałkowski
- Faculty of Chemistry, University of Gdansk, Wita Stwosza 63, Gdansk 80-308, Poland
| | - Jacek Ryl
- Faculty of Applied Physics and Mathematics, Institute of Nanotechnology and Materials Engineering, Gdansk University of Technology, Narutowicza 11/12, Gdansk 80-233, Poland
| | - Aleksandra Mielewczyk-Gryń
- Faculty of Applied Physics and Mathematics, Institute of Nanotechnology and Materials Engineering, Gdansk University of Technology, Narutowicza 11/12, Gdansk 80-233, Poland
| | - Karolina Górnicka
- Faculty of Applied Physics and Mathematics, Institute of Nanotechnology and Materials Engineering, Gdansk University of Technology, Narutowicza 11/12, Gdansk 80-233, Poland
| | - Marta Prześniak-Welenc
- Faculty of Applied Physics and Mathematics, Institute of Nanotechnology and Materials Engineering, Gdansk University of Technology, Narutowicza 11/12, Gdansk 80-233, Poland
| |
Collapse
|
41
|
Li Y, Ma B, Zhang R, Luo X. Mechanically strong, thermal-insulated, and ultralow dielectric polyimide aerogels with adjustable crosslinking methods. POLYMER 2022. [DOI: 10.1016/j.polymer.2022.125035] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
42
|
Motamedi M, Yerushalmi L, Haghighat F, Chen Z. Recent developments in photocatalysis of industrial effluents ։ A review and example of phenolic compounds degradation. CHEMOSPHERE 2022; 296:133688. [PMID: 35074327 DOI: 10.1016/j.chemosphere.2022.133688] [Citation(s) in RCA: 18] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/31/2021] [Revised: 01/16/2022] [Accepted: 01/17/2022] [Indexed: 06/14/2023]
Abstract
Industrial expansion and increased water consumption have created water scarcity concerns. Meanwhile, conventional wastewater purification methods have failed to degrade recalcitrant pollutants efficiently. The present review paper discusses the recent advances and challenges in photocatalytic processes applied for industrial effluents treatment, with respect to phenolic compounds degradation. Key operational parameters including the catalyst loading, light intensity, initial pollutants concentration, pH, and type and concentrations of oxidants are evaluated and discussed. Compared to the other examined controlling parameters, pH has the highest effect on the photo-oxidation of contaminants by means of the photocatalyst ionization degree and surface charge. Furthermore, major phenolic compounds derived from industrial sources are comprehensively presented and the applicability of photocatalytic processes and the barriers in practical applications, including high energy demand, technical challenges, photocatalyst stability, and recyclability have been explored. The importance of energy consumption and operational costs for realistic large-scale processes are also discussed. Finally, research gaps in this area and the suggested direction for improving degradation efficiencies in industrial applications are presented. In the light of these premises, selective degradation processes in real water matrices such as untreated sewage are proposed.
Collapse
Affiliation(s)
- Mahsa Motamedi
- Department of Building, Civil and Environmental Engineering, Concordia University, Montreal, H3G 1M8, Canada
| | - Laleh Yerushalmi
- Department of Building, Civil and Environmental Engineering, Concordia University, Montreal, H3G 1M8, Canada
| | - Fariborz Haghighat
- Department of Building, Civil and Environmental Engineering, Concordia University, Montreal, H3G 1M8, Canada
| | - Zhi Chen
- Department of Building, Civil and Environmental Engineering, Concordia University, Montreal, H3G 1M8, Canada.
| |
Collapse
|
43
|
Iqbal T, Ashraf M, Masood A. Simple synthesis of WO3 based activated carbon co-doped CuS composites for photocatalytic applications. INORG CHEM COMMUN 2022. [DOI: 10.1016/j.inoche.2022.109322] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2023]
|
44
|
Light-Activated Hydroxyapatite Photocatalysts: New Environmentally-Friendly Materials to Mitigate Pollutants. MINERALS 2022. [DOI: 10.3390/min12050525] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
This review focuses on a reasoned search for articles to treat contaminated water using hydroxyapatite (HAp)-based compounds. In addition, the fundamentals of heterogeneous photocatalysis were considered, combined with parameters that affect the pollutants’ degradation using hydroxyapatite-based photocatalyst design and strategies of this photocatalyst, and the challenges of and perspectives on the development of these materials. Many critical applications have been analyzed to degrade dyes, drugs, and pesticides using HAp-based photocatalysts. This systematic review highlights the recent state-of-the-art advances that enable new paths and good-quality preparations of HAp-derived photocatalysts for photocatalysis.
Collapse
|
45
|
Darban Z, Shahabuddin S, Gaur R, Ahmad I, Sridewi N. Hydrogel-Based Adsorbent Material for the Effective Removal of Heavy Metals from Wastewater: A Comprehensive Review. Gels 2022; 8:gels8050263. [PMID: 35621561 PMCID: PMC9140941 DOI: 10.3390/gels8050263] [Citation(s) in RCA: 31] [Impact Index Per Article: 15.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2022] [Revised: 04/13/2022] [Accepted: 04/19/2022] [Indexed: 02/01/2023] Open
Abstract
Water is a vital resource that is required for social and economic development. A rapid increase in industrialization and numerous anthropogenic activities have resulted in severe water contamination. In particular, the contamination caused by heavy metal discharge has a negative impact on human health and the aquatic environment due to the non-biodegradability, toxicity, and carcinogenic effects of heavy metals. Thus, there is an immediate need to recycle wastewater before releasing heavy metals into water bodies. Hydrogels, as potent adsorbent materials, are a good contenders for treating toxic heavy metals in wastewater. Hydrogels are a soft matter formed via the cross-linking of natural or synthetic polymers to develop a three-dimensional mesh structure. The inherent properties of hydrogels, such as biodegradability, swell-ability, and functionalization, have made them superior applications for heavy metal removal. In this review, we have emphasized the recent development in the synthesis of hydrogel-based adsorbent materials. The review starts with a discussion on the methods used for recycling wastewater. The discussion then shifts to properties, classification based on various criteria, and surface functionality. In addition, the synthesis and adsorption mechanisms are explained in detail with the understanding of the regeneration, recovery, and reuse of hydrogel-based adsorbent materials. Therefore, the cost-effective, facile, easy to modify and biodegradable hydrogel may provide a long-term solution for heavy metal removal.
Collapse
Affiliation(s)
- Zenab Darban
- Department of Chemistry, School of Technology, Pandit Deendayal Energy University, Raisan 382426, India;
| | - Syed Shahabuddin
- Department of Chemistry, School of Technology, Pandit Deendayal Energy University, Raisan 382426, India;
- Correspondence: or (S.S.); (R.G.); (N.S.); Tel.: +91-8585932338 (S.S.); +91-8266907756 (R.G.); +60-124-675-320 (N.S.)
| | - Rama Gaur
- Department of Chemistry, School of Technology, Pandit Deendayal Energy University, Raisan 382426, India;
- Correspondence: or (S.S.); (R.G.); (N.S.); Tel.: +91-8585932338 (S.S.); +91-8266907756 (R.G.); +60-124-675-320 (N.S.)
| | - Irfan Ahmad
- Department of Clinical Laboratory Sciences, College of Applied Medical Sciences, King Khalid University, Abha 61421, Saudi Arabia;
| | - Nanthini Sridewi
- Department of Maritime Science and Technology, Faculty of Defence Science and Technology, National Defence University of Malaysia, Kuala Lumpur 57000, Malaysia
- Correspondence: or (S.S.); (R.G.); (N.S.); Tel.: +91-8585932338 (S.S.); +91-8266907756 (R.G.); +60-124-675-320 (N.S.)
| |
Collapse
|
46
|
Sharifi A, Rajabi Abhari A, Imanzadeh M, Mahmoodi Z, Farrokhzadeh S. Modeling RSM of photocatalytic treatment of Acid Red 18 pollutant using ZnO–Cr nano-photocatalyst, kinetic studies, and energy management. CAN J CHEM 2022. [DOI: 10.1139/cjc-2021-0230] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
Abstract
The ZnO–Cr nano-photocatalyst was synthesized using a microwave-assisted solution combustion method and applied for the photodegradation of the organic pollutant Acid Red 18 (AR18). The synthesized nano-photocatalyst was characterized by XRD, FESEM, EDX, and FTIR methods. To reach the optimal condition of the treatment, the response surface methodology was used in the central composite design model. The amount of nano-photocatalyst, pH of the solution, and initial concentration of the pollutant were optimized. The polynomial 3-degree model was fitted to the photodegradation data, and the correlation coefficients of the model showed an interaction between the parameters. Optimization of the polynomial model for pollutant treatment was investigated under the same conditions, and the comparison of the observed and predicted treatment models showed a low difference in decolorization. The intermediates were identified by liquid chromatography/mass spectrometry. A kinetic study showed that the first-order kinetic constant for the degradation of pollutant concentrations from 10 to 30 mg L−1 changed from 0.0178 to 0.0058 min–1. Finally, economic evaluation and energy management of the process showed that the decolorization process was more economical at low pollutant concentrations.
Collapse
Affiliation(s)
- Abdolkarim Sharifi
- Department of Environmental Research, Institute for Color Science and Technology, Tehran, Iran
| | - Abbas Rajabi Abhari
- Department of Environmental Research, Institute for Color Science and Technology, Tehran, Iran
| | - Mehdi Imanzadeh
- Department of Chemistry, Parsabad Moghan Branch, Islamic Azad University, Parsabad, Iran
| | - Zahra Mahmoodi
- Department of Chemistry, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Samaneh Farrokhzadeh
- Department of Environmental Research, Institute for Color Science and Technology, Tehran, Iran
- Halal Research Center of IRI, FDA, Tehran, Iran
| |
Collapse
|
47
|
Adam AMA, Saad HA, Atta A, Alsawat M, Hegab MS, Refat MS, Altalhi TA, Alosaimi E, Younes AA. Usefulness of charge-transfer interaction between urea and vacant orbital acceptors to generate novel adsorbent material for the adsorption of pesticides from irrigation water. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2021.118188] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
48
|
Zhang J, Chen Z, Guo R, Shan D, Zhao Y, Linghu X, Shu Y, Wang B. Synthesis of nano-sized Ag3PW12O40/ZnO heterojunction as a photocatalyst for degradation of organic pollutants under simulated sunlight. ARAB J CHEM 2022. [DOI: 10.1016/j.arabjc.2021.103659] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023] Open
|
49
|
Subaihi A, Naglah AM. Facile synthesis and characterization of Fe2O3 nanoparticles using L-lysine and L-serine for efficient photocatalytic degradation of methylene blue dye. ARAB J CHEM 2022. [DOI: 10.1016/j.arabjc.2021.103613] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022] Open
|
50
|
Enhanced photocatalytic degradation of rhodamine B and malachite green employing BiFeO3/g-C3N4 nanocomposites: An efficient visible-light photocatalyst. INORG CHEM COMMUN 2022. [DOI: 10.1016/j.inoche.2022.109286] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022]
|