Comparison of thermal properties of fish collagen and bovine collagen in the temperature range 298–670 K

Design of improved acellular fish skin as a promising scaffold for tissue regeneration applications

Decellularized marine tissues have been regarded as a desirable biomaterial because of their biological risk reduction, less religious constraints, and resemblance to mammalian tissues. The properties of these matrices can be improved by adding cross-linkers. In this study, after decellularization of the of Tilapia and Grass carp fish skin, a comparative study was conducted between them. Due to the higher abundance of collagen and glycosaminoglycans (GAGs) in Tilapia skin, it was selected for further study. In the next step, the cross-linking process was performed with three concentrations of 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide/ N-Hydroxysuccinimide (EDC/NHS) and tannic acid cross-linkers. The MTT results showed that the cross-linked samples with low concentrations of EDC/NHS had higher biocompatibility compared to the cross-linked sample with high concentration of EDC/NHS, as well as all samples cross-linked with tannic acid. Mechanical and physical studies conducted on the skin of Tilapia fish showed that the 15 mM/7.5 mM concentration of EDC/NHS increased the mechanical and temperature strength and decreased the degradability and it did not influence cell attachment. In general, it was shown that different fish skins differ in terms of collagen and GAGs, and the optimal concentration of EDC cross-linker improves the mechanical and physical properties of the matrix derived from fish skin.

An endometrial biomimetic extracellular matrix (ECM) for enhanced endometrial regeneration using hyaluronic acid hydrogel containing recombinant human type III collagen

Endometrial injury poses a significant challenge in tissue regeneration, with type III collagen (COL III) playing a pivotal role in maintaining endometrial integrity and facilitating repair. Our study explored the utility of recombinant human type III collagen (RHC) as an intervention for endometrial damage. To address the challenges associated with the inherent instability and rapid degradation of COL III in vivo, we developed an RHC-HA hydrogel by conjugating RHC with hyaluronic acid (HA), thus ensuring a more stable and sustained delivery. Our findings suggested that the RHC-HA hydrogel significantly promoted endometrial regeneration and restored fertility. The hydrogel facilitated prolonged retention of RHC in the uterus, leading to a substantial improvement in the repair process. The synergistic interaction between RHC and HA greatly enhances cell proliferation and adhesion, surpassing the efficacy of HA or RHC alone. Additionally, the RHC-HA hydrogel demonstrated notable anti-fibrotic effects, which are crucial for preventing abnormalities during endometrial healing. These findings suggested that the RHC-HA hydrogel presented a therapeutic strategy in the treatment of uterine endometrial injuries, which may improve female reproductive health.

Unlocking the Therapeutic Potential of Marine Collagen: A Scientific Exploration for Delaying Skin Aging

Aging is closely associated with collagen degradation, impacting the structure and strength of the muscles, joints, bones, and skin. The continuous aging of the skin is a natural process that is influenced by extrinsic factors such as UV exposure, dietary patterns, smoking habits, and cosmetic supplements. Supplements that contain collagen can act as remedies that help restore vitality and youth to the skin, helping combat aging. Notably, collagen supplements enriched with essential amino acids such as proline and glycine, along with marine fish collagen, have become popular for their safety and effectiveness in mitigating the aging process. To compile the relevant literature on the anti-aging applications of marine collagen, a search and analysis of peer-reviewed papers was conducted using PubMed, Cochrane Library, Web of Science, and Embase, covering publications from 1991 to 2024. From in vitro to in vivo experiments, the reviewed studies elucidate the anti-aging benefits of marine collagen, emphasizing its role in combating skin aging by minimizing oxidative stress, photodamage, and the appearance of wrinkles. Various bioactive marine peptides exhibit diverse anti-aging properties, including free radical scavenging, apoptosis inhibition, lifespan extension in various organisms, and protective effects in aging humans. Furthermore, the topical application of hyaluronic acid is discussed as a mechanism to increase collagen production and skin moisture, contributing to the anti-aging effects of collagen supplementation. The integration of bio-tissue engineering in marine collagen applications is also explored, highlighting its proven utility in skin healing and bone regeneration applications. However, limitations to the scope of its application exist. Thus, by delving into these nuanced considerations, this review contributes to a comprehensive understanding of the potential and challenges associated with marine collagen in the realm of anti-aging applications.

Tissue engineering applications of recombinant human collagen: a review of recent progress

With the rapid development of synthetic biology, recombinant human collagen has emerged as a cutting-edge biological material globally. Its innovative applications in the fields of material science and medicine have opened new horizons in biomedical research. Recombinant human collagen stands out as a highly promising biomaterial, playing a pivotal role in crucial areas such as wound healing, stroma regeneration, and orthopedics. However, realizing its full potential by efficiently delivering it for optimal therapeutic outcomes remains a formidable challenge. This review provides a comprehensive overview of the applications of recombinant human collagen in biomedical systems, focusing on resolving this crucial issue. Additionally, it encompasses the exploration of 3D printing technologies incorporating recombinant collagen to address some urgent clinical challenges in regenerative repair in the future. The primary aim of this review also is to spotlight the advancements in the realm of biomaterials utilizing recombinant collagen, with the intention of fostering additional innovation and making significant contributions to the enhancement of regenerative biomaterials, therapeutic methodologies, and overall patient outcomes.

Marine collagen: Unveiling the blue resource-extraction techniques and multifaceted applications

Marine organisms such as fish and shellfish are composed of compounds with properties and characteristics that have been proven useful in a variety of sectors such as cosmetics, healthcare (wound healing), food industries, and tissue engineering. Collagen extraction from fish waste as a "blue resource" has attracted research attention over the past decade. Around 75 % of fish waste contains a high concentration of collagen. This has driven research in the conversion of these low-cost by-products into valuable products. Collagen extracted by acidic or/and enzymatic methods is gaining a lot of attention today due to its low cost and high yield. Fermentation and enzymatic hydrolysis stand out as one of the most environmentally sustainable and ecologically friendly methods for collagen extraction. Because of its great biocompatibility, excellent bioactivity, and low antigenicity, marine collagen is receiving more attention. Furthermore, collagen-derived peptides may exhibit interesting antioxidant activity, potent antihypertensive activity, and antimicrobial activity against different strains of bacteria. This review focuses on the advancements in extraction and detection methods of marine collagen, both from a technological and legislative standpoint, in addition to exploring its diverse range of application domains.

Extracellular matrix type 0: From ancient collagen lineage to a versatile product pipeline - JellaGel™

Extracellular matrix type 0 is reported. The matrix is developed from a jellyfish collagen predating mammalian forms by over 0.5 billion years. With its ancient lineage, compositional simplicity, and resemblance to multiple collagen types, the matrix is referred to as the extracellular matrix type 0. Here we validate the matrix describing its physicochemical and biological properties and present it as a versatile, minimalist biomaterial underpinning a pipeline of commercialised products under the collective name of JellaGelTM. We describe an extensive body of evidence for folding and assembly of the matrix in comparison to mammalian matrices, such as bovine collagen, and its use to support cell growth and development in comparison to known tissue-derived products, such as Matrigel™. We apply the matrix to co-culture human astrocytes and cortical neurons derived from induced pluripotent stem cells and visualise neuron firing synchronicity with correlations indicative of a homogenous extracellular material in contrast to the performance of heterogenous commercial matrices. We prove the ability of the matrix to induce spheroid formation and support the 3D culture of human immortalised, primary, and mesenchymal stem cells. We conclude that the matrix offers an optimal solution for systemic evaluations of cell-matrix biology. It effectively combines the exploitable properties of mammalian tissue extracts or top-down matrices, such as biocompatibility, with the advantages of synthetic or bottom-up matrices, such as compositional control, while avoiding the drawbacks of the two types, such as biological and design heterogeneity, thereby providing a unique bridging capability of a stem extracellular matrix.

Comparison of Type I and Type III Collagen Concentration between Oreochromis mossambicus and Oreochromis niloticus in Relation to Skin Scaffolding

Background and Objectives: Skin scaffolding can be done using allografts and autografts. As a biological allograft, the skin of Oreochromis niloticus (ON) has been used due to its high type I and III collagen content. Oreochromis mossambicus (OM) is also a member of the Oreochromis family, but not much is known regarding its collagen content. As such, this study aimed to assess and compare the collagen content of the two fish species. Materials and Methods: This is a crossover study comparing the skin collagen contents of the two fish. Young fish were chosen, as they tend to have higher collagen concentrations. The skin samples were sterilized in chlorhexidine and increasing glycerol solutions and analyzed histochemically with Sirius red picrate under polarized light microscopy. Results: 6 young ON and 4 OM specimens were used. Baseline type I collagen was higher for OM, but at maximum sterilization it was higher for ON, with no differences in between Type III collagen was higher for OM across all comparisons with the exception of the last stage of sterilization. Generally, collagen concentrations were higher in highly sterilized samples. Conclusions: OM skin harvested from young fish, with its greater collagen III content may be a better candidate for use as a biological skin scaffold in the treatment of burn wounds, compared to ON.

A Thermostable Type I Collagen from Swim Bladder of Silver Carp (Hypophthalmichthys molitrix)

As a major component of the extracellular matrix, collagen has been used as a biomaterial for many purposes including tissue engineering. Commercial collagen derived from mammals is associated with a risk of prion diseases and religious restrictions, while fish-derived collagen can avoid such issues. In addition, fish-derived collagen is widely available and low-cost; however, it often suffers from poor thermal stability, which limits its biomedical application. In this study, collagen with a high thermal stability was successfully extracted from the swim bladder of silver carp (Hypophthalmichthys molitrix) (SCC). The results demonstrated that it was a type I collagen with high purity and well-preserved triple-helix structure. Amino acid composition assay showed that the amounts of threonine, methionine, isoleucine and phenylalanine in the collagen of swim bladder of silver carp were higher than those of bovine pericardium. After adding salt solution, swim-bladder-derived collagen could form fine and dense collagen fibers. In particular, SCC exhibited a higher thermal denaturation temperature (40.08 °C) compared with collagens from the swim bladder of grass carp (Ctenopharyngodon idellus) (GCC, 34.40 °C), bovine pericardium (BPC, 34.47 °C) and mouse tail (MTC, 37.11 °C). Furthermore, SCC also showed DPPH radical scavenging ability and reducing power. These results indicate that SCC presents a promising alternative source of mammalian collagen for pharmaceutical and biomedical applications.

Sustainable Collagen Blends with Different Ionic Liquids for Resistive Touch Sensing Applications

Considering the sustainable development goals to reduce environmental impact, sustainable sensors based on natural polymers are a priority as the large im plementation of these materials is required considering the Internet of Things (IoT) paradigm. In this context, the present work reports on sustainable blends based on collagen and different ionic liquids (ILs), including ([Ch][DHP], [Ch][TSI], [Ch][Seri]) and ([Emim][TFSI]), processed with varying contents and types of ILs in order to tailor the electrical response. Varying IL types and contents leads to different interactions with the collagen polymer matrix and, therefore, to varying mechanical, thermal, and electrical properties. Collagen/[Ch][Seri] samples display the most pronounced decrease of the tensile strength (3.2 ± 0.4 MPa) and an increase of the elongation at break (50.6 ± 1.5%). The best ionic conductivity value of 0.023 mS cm^-1 has been obtained for the sample with 40 wt % of the IL [Ch][Seri]. The functional response of the collagen-IL films has been demonstrated on a resistive touch sensor whose response depends on the ionic conductivity, being suitable for the next generation of sustainable touch sensing devices.

Non-denatured yak type I collagen accelerates sunburned skin healing by stimulating and replenishing dermal collagen

Sunburn is one of the most common skin lesions caused by excessive UV exposure, and its incidence is highly correlated with the risks of skin cancer. A variety of drugs including corticosteroids and NSAIDs have been developed to treat acute sunburn, however, they have raised severe concerns such as poor healing efficacy and long recovery time. We have for the first time extracted non-denatured type I collagen from yak hide, which displays a canonical triple helical structure with melting temperature of 42.7 °C. The highly pure yak collagen type I (YCI) self-assembles to form well-ordered nanofibers with periodic d-bands. YCI is highly biocompatible, and it significantly promotes the proliferation and adhesion of HFF-1 cells. The sunburn healing effects of YCI has been investigated using acute skin injury mouse model. Histological analysis shows that 4 days' treatment of YCI has resulted in the recovery of sunburned mice skin to a healthy state, indicated by pronounced acceleration of epithelization and collagen deposition. The collagen volume fraction as well as the hydroxyproline (Hyp) content of YCI-treated sunburned skin have been found to be greatly increased, confirming the enhanced regeneration of collagen. YCI creams and dressings have also shown superior healing capacity of sunburn by remarkably shortening the recovery time. Notably, the denatured collagen-targeted staining results indicated a large quantity of denatured collagen in sunburned mice, which became substantially reduced after the YCI treatment. FITC-labeled YCI has been further found to penetrate into the dermis of sunburned mice. The highly biocompatible and bioactive non-denatured YCI provides an improved treatment of sunburn, indicating very promising applications of YCI in cosmetics and dermatology.

Advances in osseointegration of biomimetic mineralized collagen and inorganic metal elements of natural bone for bone repair

At this stage, bone defects caused by trauma, infection, tumor, or congenital diseases are generally filled with autologous bone or allogeneic bone transplantation, but this treatment method has limited sources, potential disease transmission and other problems. Ideal bone-graft materials remain continuously explored, and bone defect reconstruction remains a significant challenge. Mineralized collagen prepared by bionic mineralization combining organic polymer collagen with inorganic mineral calcium phosphate can effectively imitate the composition and hierarchical structure of natural bone and has good application value in bone repair materials. Magnesium, strontium, zinc and other inorganic components not only can activate relevant signaling pathways to induce differentiation of osteogenic precursor cells but also stimulate other core biological processes of bone tissue growth and play an important role in natural bone growth, and bone repair and reconstruction. This study reviewed the advances in hydroxyapatite/collagen composite scaffolds and osseointegration with natural bone inorganic components, such as magnesium, strontium and zinc.

Preparation of Collagen/Hydroxyapatite Composites Using the Alternate Immersion Method and Evaluation of the Cranial Bone-Forming Capability of Composites Complexed with Acidic Gelatin and b-FGF

Bone-substitute materials are essential in dental implantology. We prepared collagen (Col)/hydroxyapatite (Hap)/acidic gelatin (AG)/basic fibroblast growth factor (b-FGF) constructs with enhanced bone-forming capability. The Col/Hap apatite composites were prepared by immersing Col sponges alternately in calcium and phosphate ion solutions five times, for 20 and 60 min, respectively. Then, the sponges were heated to 56 °C for 48 h. Scanning electron microscopy/energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction analyses showed that the Col/Hap composites contained poorly crystalline Hap precipitates on the Col matrix. Col/Hap composite granules were infiltrated by AG, freeze-dried, and immersed in b-FGF solution. The wet quaternary constructs were implanted in rat cranial bone defects for 8 weeks, followed by soft X-ray measurements and histological analysis. Animal studies have shown that the constructs moderately increase bone formation in cranial bone defects. We found that an alternate immersion time of 20 min led to the greatest bone formation (p < 0.05). Constructs placed inside defects slightly extend the preexisting bone from the defect edges and lead to the formation of small island-like bones inside the defect, followed by disappearance of the constructs. The combined use of Col, Hap, AG, and b-FGF might bring about novel bone-forming biomaterials.

Characteristics and Properties of Acid- and Pepsin-Solubilized Collagens from the Tail Tendon of Skipjack Tuna (Katsuwonus pelamis)

The tail tendons of skipjack tuna (Katsuwonus pelamis), a by-product from the meat-separation process in canned-tuna production, was used as an alternative source of collagen extraction. The acid-solubilized collagens using vinegar (VTC) and acetic-acid (ATC) extraction and pepsin-solubilized collagen (APTC) were extracted from tuna-tail tendon. The physiochemical properties and characteristics of those collagens were investigated. The obtained yield of VTC, ATC, and APTC were 7.88 ± 0.41, 8.67 ± 0.35, and 12.04 ± 0.07%, respectively. The determination of protein-collagen solubility, the effect of pH and NaCl on collagen solubility, Fourier-transform infrared spectroscopy (FTIR) spectrum, and microstructure of the collagen-fibril surface using a scanning electron microscope (SEM) were done. The protein solubility of VTC, ATC, and APTC were 0.44 ± 0.03, 0.52 ± 0.07, and 0.67 ± 0.12 mg protein/mg collagen. The solubility of collagen decreased with increasing of NaCl content. These three collagens were good solubility at low pH with the highest solubility at pH 5. The FTIR spectrum showed absorbance of Amide A, Amide B, Amide I, Amide II, and Amide III groups as 3286-3293 cm^-1, 2853-2922 cm^-1, 1634-1646 cm^-1, 1543-1544 cm^-1, and 1236-1237 cm^-1, respectively. The SEM analysis indicated a microstructure of collagen surface as folding of fibril with small pore.

Fabrication of Biologically Inspired Electrospun Collagen/Silk fibroin/bioactive glass composited nanofibrous scaffold to accelerate the treatment efficiency of bone repair

Bone disease and disorder treatment might be difficult because of its complicated nature. Millions of patients each year need bone substitutes that may help them recover quickly from a variety of illnesses. Synthetic bone replacements that mirror the structural, chemical, and biological features of bone matrix structure will be very helpful and in high demand. In this research, the inorganic bioactive glass nanoparticles matrixed with organic collagen and silk fibroin structure (COL/SF/CaO-SiO₂) were used to create multifunctional bone-like fibers in this study, which we describe here. The fiber structure is organized in a layered fashion comparable to the sequence in which apatite and neo tissue are formed. The amino groups in COL and SF combined with CaO-SiO₂ to stabilize the resulting composite nanofiber. Morphological and functional studies confirmed that crystalline CaO-SiO₂ nanoparticles with average sizes of 20 ± 5 nm are anchored on a 115 ± 10 nm COL/SF nanofiber matrix. X-ray photoelectron spectroscopic (XPS) results confirmed the presence of C, N, O, Ca, and Si in the composite fiber with an atomic percentage of 59.46, 3.30, 20.25, 3.38 and 13.61%. respectively. The biocompatibility examination with osteoblast cells (Saos-2) revealed that the CAL/SF/CaO-SiO₂ composite nanofiber had enhanced osteogenic activity. Finally, when the CAL/SF/CaO-SiO₂ composite nanofiber scaffolds were used to treat an osteoporotic bone defect in a rat model, the composite nanofiber scaffolds significantly promoted bone regeneration and vascularization. This novel fibrous scaffold class represents a potential breakthrough in the design of advanced materials for complicated bone regeneration.

The Effect of Argon Plasma Surface Treatment on Poly(lactic-co-glycolic acid)/Collagen-Based Biomaterials for Bone Tissue Engineering

Nonunion bone fractures can impact the quality of life and represent a major economic burden. Scaffold-based tissue engineering has shown promise as an alternative to bone grafting. Achieving desirable bone reconstruction requires appropriate surface properties, together with optimizing the internal architecture of 3D scaffolds. This study presents the surface modification of poly(lactic-co-glycolic acid) (PLGA), collagen, and PLGA-collagen via an argon plasma treatment. Argon plasma can modify the surface chemistry and topography of biomaterials and improve in vivo integration. Solvent-cast films were prepared using 1,1,1,3,3,3-hexafluoro-2-propanol and characterized via differential scanning calorimetry, thermogravimetric analysis, contact angle measurement, and critical surface tension analysis. For PLGA films, the water contact angle dropped from 70° to 42°, whereas the diiodomethane contact angle reduced from 53° to 32° after the plasma treatment. A set of PLGA-collagen formulations were loaded with nanohydroxyapatite (nHA) and polyethylene glycol (PEG) to enhance their osteoconductivity and hydrophilicity. Then, 3D scaffolds were fabricated using a 3D Bioplotter and characterized via Fourier-transform infrared (FTIR) spectroscopy. A bicinchoninic acid assay (BCA) was used to compare the protein release from the untreated and plasma-treated scaffolds into phosphate-buffered saline (PBS). The plasma-treated scaffolds had a lower protein release, and the difference compared to the untreated scaffolds was statistically significant.

Growth Factor-Free Vascularization of Marine-Origin Collagen Sponges Using Cryopreserved Stromal Vascular Fractions from Human Adipose Tissue

The successful integration of transplanted three-dimensional tissue engineering (TE) constructs depends greatly on their rapid vascularization. Therefore, it is essential to address this vascularization issue in the initial design of constructs for perfused tissues. Two of the most important variables in this regard are scaffold composition and cell sourcing. Collagens with marine origins overcome some issues associated with mammal-derived collagen while maintaining their advantages in terms of biocompatibility. Concurrently, the freshly isolated stromal vascular fraction (SVF) of adipose tissue has been proposed as an advantageous cell fraction for vascularization purposes due to its highly angiogenic properties, allowing extrinsic angiogenic growth factor-free vascularization strategies for TE applications. In this study, we aimed at understanding whether marine collagen 3D matrices could support cryopreserved human SVF in maintaining intrinsic angiogenic properties observed for fresh SVF. For this, cryopreserved human SVF was seeded on blue shark collagen sponges and cultured up to 7 days in a basal medium. The secretome profile of several angiogenesis-related factors was studied throughout culture times and correlated with the expression pattern of CD31 and CD146, which showed the formation of a prevascular network. Upon in ovo implantation, increased vessel recruitment was observed in prevascularized sponges when compared with sponges without SVF cells. Immunohistochemistry for CD31 demonstrated the improved integration of prevascularized sponges within chick chorioalantoic membrane (CAM) tissues, while in situ hybridization showed human cells lining blood vessels. These results demonstrate the potential of using cryopreserved SVF combined with marine collagen as a streamlined approach to improve the vascularization of TE constructs.

A Comprehensive Review on Collagen Type I Development of Biomaterials for Tissue Engineering: From Biosynthesis to Bioscaffold

Collagen is the most abundant structural protein found in humans and mammals, particularly in the extracellular matrix (ECM). Its primary function is to hold the body together. The collagen superfamily of proteins includes over 20 types that have been identified. Yet, collagen type I is the major component in many tissues and can be extracted as a natural biomaterial for various medical and biological purposes. Collagen has multiple advantageous characteristics, including varied sources, biocompatibility, sustainability, low immunogenicity, porosity, and biodegradability. As such, collagen-type-I-based bioscaffolds have been widely used in tissue engineering. Biomaterials based on collagen type I can also be modified to improve their functions, such as by crosslinking to strengthen the mechanical property or adding biochemical factors to enhance their biological activity. This review discusses the complexities of collagen type I structure, biosynthesis, sources for collagen derivatives, methods of isolation and purification, physicochemical characteristics, and the current development of collagen-type-I-based scaffolds in tissue engineering applications. The advancement of additional novel tissue engineered bioproducts with refined techniques and continuous biomaterial augmentation is facilitated by understanding the conventional design and application of biomaterials based on collagen type I.

Physicochemical Properties of Collagen from the Bone of Harpadon nehereus and Its Protective Effects against Angiotensin II-Induced Injury in Human Umbilical Vein Endothelial Cells

The physicochemical characterization of a new collagen from the bone of Harpadon nehereus (HNBC) and its protective effects against Ang II-induced injury of human umbilical vein endothelial cells (HUVEC) were investigated. The triple helix of HNBC analyzed by SDS-PAGE was formed as (α₁)₂α₂, belonging to type I collagen. UV spectra showed that HNBC had a maximum absorbance at 230 nm. FTIR spectra indicated the triple helical structure and activity of HNBC. The high solubility of HNBC was observed in the low pH ranges (≤4) and NaCl concentrations (≤2%, w/v). The maximum transition (T _m) of HNBC was determined to be 48.5 °C. The amino acid composition analysis showed that glycine, glutamic acid, proline, and alanine were the abundant amino acids available in HNBC. HNBC showed free radical (DPPH and OH·) scavenging activities in the tested concentrations (0.5-6 mg/mL). In addition, HNBC could effectively protect against Ang II-induced injury of HUVEC by increasing the activities of antioxidant enzymes, such as CAT, SOD, and GSH-Px. Overall, collagen from the bone of H. nehereus has promising prospects in functional food and biomedical industries.

Healing Process, Pain, and Health-Related Quality of Life in Patients with Venous Leg Ulcers Treated with Fish Collagen Gel: A 12-Week Randomized Single-Center Study

The aim of the study was to assess the effectiveness of fish skin collagen and its impact on healing, pain intensity, and quality of life in patients with venous leg ulcers (VLUs). This study included 100 adults with VLUs. Eligible patients were randomized to either tropocollagen gel treatment (group A, n = 47) or placebo alone (group B, n = 45). We applied the gel to the periwound skin for 12 weeks. All groups received standard wound care, including class 2 compression therapy and wound hygiene procedures. We assessed the healing rate (cm2/week) and quality of life (QoL) using the Skindex-29 and CIVIQ scales. In group A, more ulcers healed, and the healing rate was faster. In both study groups, patients showed a significant improvement in quality of life after the intervention, but there was a greater improvement in the tropocollagen group. In group A, the greatest improvement was related to physical symptoms and the pain dimension. This study showed that the application of fish collagen gel to the periwound skin improves the healing process and QoL in patients with VLUs. The 12-week treatment with collagen reduced the severity of physical complaints, pain, and local skin symptoms, which determined the quality of life in patients with VLUs to the greatest extent.

PVA-Based Electrospun Biomembranes with Hydrolyzed Collagen and Ethanolic Extract of Hypericum perforatum for Potential Use as Wound Dressing: Fabrication and Characterization

Biological, physicochemical, structural, and thermal properties of PVA-based electrospun wound dressings added with hydrolyzed collagen (HC) and different concentrations of Hypericum perforatum ethanolic extract (EEHP) were studied. Membrane characterization was carried out by X-ray diffraction, Fourier infrared spectroscopy, differential scanning calorimetry, barrier properties, scanning electron microscopy, image analysis (diameter and pore size), as well as antimicrobial and anti-inflammatory activities. Results showed that the PVA/HC/EEHP materials, fabricated under controlled conditions of temperature and humidity, generated fiber membranes with diameters between 140−390 nm, adequate porosity and pore size for cell growth (67−90% and 4−16 µm, respectively), and good barrier properties (0.005−0.032 g·m−2 s−1) to be used in the treatment of conditions on the skin, and was even better than some commercial products. Finally, they showed to have anti-inflammatory (>80%), and antimicrobial activity against S. aureus and S. epiderm. Furthermore, higher crystalline structure was observed according to the EEHP concentration. In addition, this is the first report in which PVA/HC/EEHP membranes are successfully fabricated and characterized.

Marine Collagen: A Promising Biomaterial for Wound Healing, Skin Anti-Aging, and Bone Regeneration

Marine organisms harbor numerous bioactive substances that can be utilized in the pharmaceutical and cosmetic industries. Scientific research on various applications of collagen extracted from these organisms has become increasingly prevalent. Marine collagen can be used as a biomaterial because it is water soluble, metabolically compatible, and highly accessible. Upon review of the literature, it is evident that marine collagen is a versatile compound capable of healing skin injuries of varying severity, as well as delaying the natural human aging process. From in vitro to in vivo experiments, collagen has demonstrated its ability to invoke keratinocyte and fibroblast migration as well as vascularization of the skin. Additionally, marine collagen and derivatives have proven beneficial and useful for both osteoporosis and osteoarthritis prevention and treatment. Other bone-related diseases may also be targeted by collagen, as it is capable of increasing bone mineral density, mineral deposition, and importantly, osteoblast maturation and proliferation. In this review, we demonstrate the advantages of marine collagen over land animal sources and the biomedical applications of marine collagen related to bone and skin damage. Finally, some limitations of marine collagen are briefly discussed.

3D-Printed Mucoadhesive Collagen Scaffolds as a Local Tetrahydrocurcumin Delivery System

Native collagen doughs were processed using a syringe-based extrusion 3D printer to obtain collagen scaffolds. Before processing, the rheological properties of the doughs were analyzed to determine the optimal 3D printing conditions. Samples showed a high shear-thinning behavior, reported beneficial in the 3D printing process. In addition, tetrahydrocurcumin (THC) was incorporated into the dough formulation and its effect on collagen structure, as well as the resulting scaffold's suitability for wound healing applications, were assessed. The denaturation peak observed by differential scanning calorimetry (DSC), along with the images of the scaffolds' surfaces assessed using scanning electron microscopy (SEM), showed that the fibrillar structure of collagen was maintained. These outcomes were correlated with X-ray diffraction (XRD) results, which showed an increase of the lateral packaging of collagen chains was observed in the samples with a THC content up to 4%, while a higher content of THC considerably decreased the structural order of collagen. Furthermore, physical interactions between collagen and THC molecules were observed using Fourier transform infrared (FTIR) spectroscopy. Additionally, all samples showed swelling and a controlled release of THC. These results along with the mucoadhesive properties of collagen suggested the potential of these THC-collagen scaffolds as sustained THC delivery systems.

Marine origin materials on biomaterials and advanced therapies to cartilage tissue engineering and regenerative medicine

The body's self-repair capacity is limited, including injuries on articular cartilage zones. Over the past few decades, tissue engineering and regenerative medicine (TERM) has focused its studies on the development of natural biomaterials for clinical applications aiming to overcome this self-therapeutic bottleneck. This review focuses on the development of these biomaterials using compounds and materials from marine sources that are able to be produced in a sustainable way, as an alternative to mammal sources (e.g., collagens) and benefiting from their biological properties, such as biocompatibility, low antigenicity, biodegradability, among others. The structure and composition of the new biomaterials require mimicking the native extracellular matrix (ECM) of articular cartilage tissue. To design an ideal temporary tissue-scaffold, it needs to provide a suitable environment for cell growth (cell attachment, proliferation, and differentiation), towards the regeneration of the damaged tissues. Overall, the purpose of this review is to summarize various marine sources to be used in the development of different tissue-scaffolds with the capability to sustain cells envisaging cartilage tissue engineering, analysing the systems displaying more promising performance, while pointing out current limitations and steps to be given in the near future.

Nature-Based Biomaterials and Their Application in Biomedicine

Natural polymers, based on proteins or polysaccharides, have attracted increasing interest in recent years due to their broad potential uses in biomedicine. The chemical stability, structural versatility, biocompatibility and high availability of these materials lend them to diverse applications in areas such as tissue engineering, drug delivery and wound healing. Biomaterials purified from animal or plant sources have also been engineered to improve their structural properties or promote interactions with surrounding cells and tissues for improved in vivo performance, leading to novel applications as implantable devices, in controlled drug release and as surface coatings. This review describes biomaterials derived from and inspired by natural proteins and polysaccharides and highlights their promise across diverse biomedical fields. We outline current therapeutic applications of these nature-based materials and consider expected future developments in identifying and utilising innovative biomaterials in new biomedical applications.

Changes in the Molecular Characteristics of Bovine and Marine Collagen in the Presence of Proteolytic Enzymes as a Stage Used in Scaffold Formation

Biopolymers, in particular collagen and fibrinogen, are the leading materials for use in tissue engineering. When developing technology for scaffold formation, it is important to understand the properties of the source materials as well as the mechanisms that determine the formation of the scaffold structures. Both factors influence the properties of scaffolds to a great extent. Our present work aimed to identify the features of the molecular characteristics of collagens of different species origin and the changes they undergo during the enzymatic hydrolysis used for the process of scaffold formation. For this study, we used the methods of gel-penetrating chromatography, dynamic light scattering, reading IR spectra, and scanning electron microscopy. It was found that cod collagen (CC) and bovine collagen (BC) have different initial molecular weight parameters, and that, during hydrolysis, the majority of either type of protein is hydrolyzed by the proteolytic enzymes within the first minute. The differently sourced collagen samples were also hydrolyzed with the formation of two low molecular fractions: Mw ~ 10 kDa and ~20 kDa. In the case of CC, the microstructure of the final scaffolds contained denser, closely spaced fibrillar areas, while the BC-sourced scaffolds had narrow, short fibrils composed of unbound fibers of hydrolyzed collagen in their structure.

Mechanical Properties of Porcine and Fish Skin-Based Collagen and Conjugated Collagen Fibers

Collagen is a protein that is a major component of animal skins and tendons. It is used in various medical, cosmetic, and food products through extraction and purification. The fibrous products of purified collagen fibers extracted from raw mammal materials have relatively excellent mechanical properties and are used for high-end medical products. In this study, we examined collagen materials produced from porcine and fish skins, which are major sources of collagen raw materials. We examined a method for spinning collagen fibers from fish skin-based collagen and analyzed the physical properties of those collagen fibers. In addition, we examined the characteristics and advantages of conjugated fibers according to their porcine- and/or fish skin-based compositions. The spinnability and mechanical properties of these conjugated fibers were analyzed according to their compositions. The mechanical properties of collagen structure are determined by hydroxyproline content and can be manipulated by the composition of collagen in the conjugated fibers.

Evaluation of a novel tilapia-skin acellular dermis matrix rationally processed for enhanced wound healing

Acellular Dermal Matrix (ADM) is mainly made with human or porcine skins and has the risk of zoonotic virus transmission. The fish skin-derived ADM could overcome the shortcoming. Fish skin acellular matrix has been used as wound dressing, but there is few systematic studies on tilapia-skin acellular dermal matrix (TS-ADM). In the present study, a novel TS-ADM was made by an alkaline decellularization process and γ-irradiation. The physical properties, biocompatibility, pre-clinical safety and wound healing activity of TS-ADM were systematically evaluated for its value as a functionally bioactive wound dressing. Histopathological analysis (hematoxylin and eosin staining, 4,6-diamidino-2-phenylindole (DAPI) staining) and DNA quantification both proved that the nuclear components of tilapia skin were removed sufficiently in TS-ADM. Compared to the commercial porcine acellular dermal matrix (DC-ADM), TS-ADM has distinctive features in morphology, thermal stability, degradability and water vapor transmission. TS-ADM was more readily degradable than DC-ADM in vitro and in vivo. In both rat and mini-pig skin wound healing experiments, TS-ADM was shown to significantly promote granulation growth, collagen deposition, angiogenesis and re-epithelialization, which may be attributed to the high expression of transforming growth factor-beta 1 (TGF-β1), alpha-smooth muscle actin (α-SMA) and CD31. Herein, the novel TS-ADM, used as a low-cost bioactive dressing, could form a microenvironment conducive to wound healing.

Recent developments in sustainably sourced protein-based biomaterials

Research into the development of sustainable biomaterials is increasing in both interest and global importance due to the increasing demand for materials with decreased environmental impact. This research field utilises natural, renewable resources to develop innovative biomaterials. The development of sustainable biomaterials encompasses the entire material life cycle, from desirable traits, and environmental impact from production through to recycling or disposal. The main objective of this review is to provide a comprehensive definition of sustainable biomaterials and to give an overview of the use of natural proteins in biomaterial development. Proteins such as collagen, gelatin, keratin, and silk, are biocompatible, biodegradable, and may form materials with varying properties. Proteins, therefore, provide an intriguing source of biomaterials for numerous applications, including additive manufacturing, nanotechnology, and tissue engineering. We give an insight into current research and future directions in each of these areas, to expand knowledge on the capabilities of sustainably sourced proteins as advanced biomaterials.

Synchrotron Fourier transform infrared microspectroscopy (sFTIRM) analysis of unfolding behavior of electrospun collagen nanofibers

Collagen nanofibers are popular extracellular matrix (ECM) materials in regenerative medicine. Electrospinning of collagen dissolved in organic solvents is widely used for fabricating anisotropic collagen nanofibers; however, such fibers are water-soluble and require cross-linking before use as scaffolds for cell culture. Herein, in-situ crosslinking during electrospinning process is suggested by using different chemical agents, namely genipin and glutaraldehyde, and physical crosslinking method (UV light). sFTIRM; Synchrotron Fourier-Transform Infrared Microspectroscopy is a powerful tool that sheds light on the molecular structure of collagen nanofibers. Applied extraction methods caused shifts on protein band positions. Electrospinning process prevents self-assembly of collagen molecules and obtained electrospun collagen nanofibers have lower band positions. Crosslinkers have effect on the secondary structure of collagen molecules. Among different crosslinkers, genipin in-situ crosslinking process perform better in preserving the native structure of electrospun collagen nanofibers than the physical crosslinking method (UV).

Potential applications of polycarbohydrates, lignin, proteins, polyacids, and other renewable materials for the formulation of green elastomers

Renewable resources including polycarbohydrates, lignin, proteins, and polyacids are the intrinsically valuable class of materials that are naturally available in great quantities. Their utilization as green additives and reinforcing bio-fillers, in substitution of environmentally perilous petroleum-based fillers, for developing high-performance green rubber blends and composites is presently a highly tempting option. Blending of these renewable materials with elastomers is not straight-forward and research needs to exploit the high functionality of carbohydrates and other natural materials as proper physicochemical interactions are essential. Correlating and understanding the structural properties of lignin, carbohydrates, polyacids, and other biopolymers, before their incorporation in elastomers, is a potential approach towards the development of green elastomers for value-added applications. Promising properties i.e., biodegradability, biocompatibility, morphological characteristics, high mechanical properties, thermal stability, sustainability, and various other characteristics along with recent advancements in the development of green elastomers are reviewed in this paper. Structures, viability, interactions, properties, and use of most common natural polycarbohydrates (chitosan and starch), lignin, and proteins (collagen and gelatin) for elastomer modification are extensively reviewed. Challenges in commercialization, applications, and future perspectives of green elastomers are also discussed. Sustainability analysis of green elastomers is accomplished to elaborate their cost-effectiveness and environmental friendliness.

Extraction of Type I Collagen from Tilapia Scales Using Acetic Acid and Ultrafine Bubbles

Type I collagen is commonly used in medical materials and cosmetics. While it can be extracted from the skin and bones of mammals, marine collagen has attracted attention recently, since the use of mammalian collagen could result in zoonosis, and products containing mammalian collagen are avoided due to some religious beliefs. Chemical extractions using strong acids and alkalis, thermal extractions, and other nonconventional methods have been used for collagen extraction. However, there are few reports on environmentally friendly methods. Although heat extractions provide higher yields of collagen, they often cause collagen denaturation. Therefore, dilute acetic acid and ultrafine bubbles of oxygen, carbon dioxide, and ozone were used to extract type I collagen from tilapia scales. The extraction performance of the different conditions employed was qualitatively analyzed by SDS-PAGE electrophoresis, and the collagen concentration was quantified using circular dichroism spectroscopy by monitoring the peak intensity at 221 nm, which is specific to the triple helix of type I collagen. Collagen was extracted from tilapia scales with a yield of 1.58% by the aeration of ultrafine bubbles of carbon dioxide gas in a 0.1 M acetic acid solution for 5 h.

A new method for determining the denaturation temperature of collagen

The denaturation temperature of collagen has been determined using several methods, such as circular dichroism, fourier transform infrared spectroscopy, and differential scanning calorimetry, etc. Such methods need specific equipment or mass samples (more than 75 mg samples), which means higher inspection costs. In this study, Sirius red was employed to determine the Tds of collagen from calf tendon, silver carp skin, frog and salmon skins (38.2 °C, 32.6 °C, 33.8 °C, and 15.6 °C, respectively) to explore a new method that does not require special equipment and only needs 2-3 mg sample for one measurement. This method was suitable for the determination of the denaturation temperature of collagen from terrestrial, aquatic and amphibian animals. Analysis of variance and t-test revealed that no significant difference was found between Sirius Red and viscosity methods. However, the Sirius Red method needs simpler equipment and less sample than viscosity and other methods. So it could be used as a convenient approach to determine the denaturation temperature of collagen instead of the viscosity method.

Fish Collagen: Extraction, Characterization, and Applications for Biomaterials Engineering

The utilization of marine-based collagen is growing fast due to its unique properties in comparison with mammalian-based collagen such as no risk of transmitting diseases, a lack of religious constraints, a cost-effective process, low molecular weight, biocompatibility, and its easy absorption by the human body. This article presents an overview of the recent studies from 2014 to 2020 conducted on collagen extraction from marine-based materials, in particular fish by-products. The fish collagen structure, extraction methods, characterization, and biomedical applications are presented. More specifically, acetic acid and deep eutectic solvent (DES) extraction methods for marine collagen isolation are described and compared. In addition, the effect of the extraction parameters (temperature, acid concentration, extraction time, solid-to-liquid ratio) on the yield of collagen is investigated. Moreover, biomaterials engineering and therapeutic applications of marine collagen have been summarized.

Graphene Hybrid Materials for Controlling Cellular Microenvironments

Cellular microenvironments are known as key factors controlling various cell functions, including adhesion, growth, migration, differentiation, and apoptosis. Many materials, including proteins, polymers, and metal hybrid composites, are reportedly effective in regulating cellular microenvironments, mostly via reshaping and manipulating cell morphologies, which ultimately affect cytoskeletal dynamics and related genetic behaviors. Recently, graphene and its derivatives have emerged as promising materials in biomedical research owing to their biocompatible properties as well as unique physicochemical characteristics. In this review, we will highlight and discuss recent studies reporting the regulation of the cellular microenvironment, with particular focus on the use of graphene derivatives or graphene hybrid materials to effectively control stem cell differentiation and cancer cell functions and behaviors. We hope that this review will accelerate research on the use of graphene derivatives to regulate various cellular microenvironments, which will ultimately be useful for both cancer therapy and stem cell-based regenerative medicine.

Development and characterization of a photo-cross-linked functionalized type-I collagen (Oreochromis niloticus) and polyethylene glycol diacrylate hydrogel

Collagen hydrogels have been widely investigated as scaffolds for tissue engineering due to their biocompatibility and capacity to promote cell adhesion. However, insufficient mechanical strength and rapid degradation properties remain the major obstacles for their applications. In the present study, type-I tilapia collagen (TC) was functionalized to form methacrylated tilapia collagen (MATC) by introducing methacrylic acid, developing a photo-cross-linked PEGDA-MATC hydrogel. The mechanical strength of PEGDA-MATC hydrogel could be tuned by adjusting the pH of the precursor solutions, which was decreased with the pH increased. At a pH 5 condition, PEGDA-MATC showed the highest compressive fracture stress (1.31 MPa). Compared to the PEGDA-TC hydrogel, PEGDA-MATC hydrogel exhibited similar swelling behavior to PEGDA-TC hydrogel in PBS solutions, but higher residual mass ratio (PEGDA-MATC, 213.2 ± 2.8%) than PEGDA-TC hydrogel (199.4 ± 3.8%) when cultured with type-I collagenase. PEGDA-MATC hydrogel showed sustained BSA release capacity for 6 days, and the BSA release ratio was significantly (p < 0.05) decreased with increasing concentration of loaded-BSA (68.6% at 4 mg mL^-1, 42.2% at 8 mg mL^-1). The PEGDA-MATC hydrogel allowed cell adhesion and proliferation in vitro. These results demonstrated that PEGDA-MATC hydrogel might be a potential scaffold for tissue engineering applications.

Sources of Collagen for Biomaterials in Skin Wound Healing

Collagen is the most frequently used protein in the fields of biomaterials and regenerative medicine. Within the skin, collagen type I and III are the most abundant, while collagen type VII is associated with pathologies of the dermal-epidermal junction. The focus of this review is mainly collagens I and III, with a brief overview of collagen VII. Currently, the majority of collagen is extracted from animal sources; however, animal-derived collagen has a number of shortcomings, including immunogenicity, batch-to-batch variation, and pathogenic contamination. Recombinant collagen is a potential solution to the aforementioned issues, although production of correctly post-translationally modified recombinant human collagen has not yet been performed at industrial scale. This review provides an overview of current collagen sources, associated shortcomings, and potential resolutions. Recombinant expression systems are discussed, as well as the issues associated with each method of expression.

Effects of the aspect ratio of multi-walled carbon nanotubes on the structure and properties of regenerated collagen fibers

Collagen is a natural one-dimensional nanomaterial. Multi-walled carbon nanotubes (MWNTs) have been previously shown to interact with biomolecules and to have promising applications in reinforced biopolymers for tissue engineering and regenerative medicine. In this work, collagen/MWNT composite fibers are prepared using dry-jet wet-spinning technology. Three types of MWNTs with aspect ratios of 40, 150, and 4000 are used to investigate the effects of the MWNT aspect ratio on the properties of the composite fibers. There results show that there are strong molecular interactions between the MWNTs and collagen molecules. The mechanical properties and thermal stability of the composite fibers are significantly improved compared to those of the collagen fibers. The diameter and aspect ratio of the MWNTs are the main factors affecting the self-assembled structure of the collagen molecules, the alignment of the microfibrils, and the mechanical and thermal performance of the composite fibers.

Extraction and characterization of collagen from the skin of Pterygoplichthys pardalis and its potential application in food industries

The primary objective of this study was to extract collagen from underutilized fish species owing to its cost effective nature and also its ability to address the demand of type I collagen arising from food and pharmaceutical industries. Acid and pepsin soluble collagen (ppASC and ppPSC) were extracted from the skin of sucker catfish (Pterygoplichthys pardalis) with a yield of 19.6 and 23.8% on wet weight basis respectively. The same were characterized and confirmed as type I collagen by SDS-PAGE, FTIR and UV-Vis spectroscopy, amino acid analysis, and Zeta potential. Taking into consideration the application of collagen in food industry, a food product was developed by incorporating with fresh cheese. This fortification was found to be acceptable and had not altered the taste, odor and other sensory properties of the product.

A quantitative comparable study on multi-hierarchy conformation of acid and pepsin-solubilized collagens from the skin of grass carp (Ctenopharyngodon idella)

This work aimed to improve yield of collagen from the grass carp skin by employing different strategies (acid-acid method, pepsin-pepsin method and acid-pepsin method, denoted as A-A, P-P, A-P, respectively). And further to conduct quantitative characterization on structural properties, self-assembly kinetics and gelation properties of these collagens. Herein, a two-step collagen extraction method (pepsin-pepsin) was established with the high yield. Meanwhile, structural measurements of high-yield collagen (pepsin-soluble collagen, PSC) and acid-soluble collagen (ASC) indicated that both collagens maintained the typical triple helical conformation of collagen type I. Moreover, the fibrillogenesis tests of PSC and ASC at the various temperatures confirmed that self-assembly were the entropy-driven process. The gelation time of both ASC and PSC was determined by the dynamic time sweep at the different frequencies combined with Winter's criterion. The self-assembly kinetics results showed that fibrillogenesis rate for ASC solution was faster, and more liable to gelation relative to PSC. Mechanical measurements suggested that ASC showed the more resistance ability to deformation than PSC due to more complicated architecture, confirmed by higher fractal dimension. However, the equivalent typical assemblies of PSC to ASC at the various stages can still be expected via controlling incubation time or temperature under the guidance of Arrhenius equation. This study would provide some strategies for achieving maximum utilization of waste biomass and significant insights into the mechanisms underlying the quantitative differences in multiple hierarchy conformation (molecule, fibrillogenesis and hydrogel) of ASC and PSC, which may benefit for subsequent design, development and optimization of collagen-based hydrogels in biomedical industries.

The Collagen Suprafamily: From Biosynthesis to Advanced Biomaterial Development

Collagen is the oldest and most abundant extracellular matrix protein that has found many applications in food, cosmetic, pharmaceutical, and biomedical industries. First, an overview of the family of collagens and their respective structures, conformation, and biosynthesis is provided. The advances and shortfalls of various collagen preparations (e.g., mammalian/marine extracted collagen, cell-produced collagens, recombinant collagens, and collagen-like peptides) and crosslinking technologies (e.g., chemical, physical, and biological) are then critically discussed. Subsequently, an array of structural, thermal, mechanical, biochemical, and biological assays is examined, which are developed to analyze and characterize collagenous structures. Lastly, a comprehensive review is provided on how advances in engineering, chemistry, and biology have enabled the development of bioactive, 3D structures (e.g., tissue grafts, biomaterials, cell-assembled tissue equivalents) that closely imitate native supramolecular assemblies and have the capacity to deliver in a localized and sustained manner viable cell populations and/or bioactive/therapeutic molecules. Clearly, collagens have a long history in both evolution and biotechnology and continue to offer both challenges and exciting opportunities in regenerative medicine as nature's biomaterial of choice.

[Progress of fish collagen as novel biomedical material]

Objective

To review the lately new progress of fish collagen as biomedical materials, and then analyze feasibility and risk management of its application as a substitute of collagen originated from mammals in clinical practice.

Methods

Based on extensive research on new application and investigation of fish collagen, the paper was prepared to bring comprehensive analysis of its research and application status, and then several key points were focused on.

Results

Fish collagen has been proved to be a novel collagen of rich source, low risk of virus transmission, low biological risk, less religious barrier, and high biocompatibility. Fish collagen has promising prospect when applied in clinical practice as novel collagen especially as a substitute of collagen derived from mammals. However, very few related translational medicine research of fish collagen has been reported up to now in China.

Conclusion

As a novel potential substitute of collagen source derived from mammals, fish collagen is concerned to be clinical feasible and necessary in translational medicine. However, massive applied basic researches should be focused on in the further investigations.

Preparation, Physicochemical and Antioxidant Properties of Acid- and Pepsin-Soluble Collagens from the Swim Bladders of Miiuy Croaker (Miichthys miiuy)

Collagen is one of the most useful biomaterials and widely applied in functional food and cosmetics. However, some consumers have paid close attention to the safety of mammalian collagens because of the outbreaks of bovine spongiform encephalopathy (BSE), foot-and-mouth disease (FMD), and other prion diseases. Therefore, there is a strong demand for developing alternative sources of collagen, with one promising source being from the process by-products of commercial fisheries. In this report, acid-soluble collagen (ASC-SB) and pepsin-soluble collagen (PSC-SB) from swim bladders of miiuy croaker (Miichthys miiuy) were isolated with yields of 1.33 ± 0.11% and 8.37 ± 0.24% of dry swim bladder weight. Glycine was the major amino acid present, with a content of 320.5 (ASC-SB) and 333.6 residues/1000 residues (PSC-SB). ASC-SB and PSC-SB had much lower denaturation temperatures compared to mammalian collagen, a consequence of low imino acid contents (196.7 and 199.5 residues/1000 residues for ASC-SB and PSC-SB, respectively). The data of amino acid composition, SDS-PAGE pattern, UV and FTIR spectra confirmed that ASC-SB and PSC-SB were mainly composed of type I collagen. FTIR spectra data indicated there were more hydrogen bonding and intermolecular crosslinks in ASC-SB. These collagens showed high solubility in the acidic pH ranges and low NaCl concentrations (less than 2%). The Zeta potential values of ASC-SB and PSC-SB were 6.74 and 6.85, respectively. ASC-SB and PSC-SB presented irregular, dense, sheet-like films linked by random-coiled filaments under scanning electron microscopy. In addition, ASC-SB and PSC-SB could scavenge DPPH radical, hydroxyl radical, superoxide anion radical, and ABTS radical in a dose-dependent manner. Overall, the results indicate that collagens from the swim bladders of miiuy croaker are a viable substitute for mammalian collagen, with potential functional food and cosmeceutical applications.

Tuning of elasticity and surface properties of hydrogel cell culture substrates by simple chemical approach

When designing materials for tissue engineering applications various parameters characterizing both materials and tissue have to be taken into account. The characteristics such as chemistry, elasticity, wettability, roughness and morphology of the substrate's surface have significant impact on cell behavior. The paper presents biopolymer (collagen/chitosan) based hydrogel materials with tunable elasticity and surface properties useful for fabrication of substrates for cell culture. Using simple chemical approach involving the change in concentration of crosslinking agent (genipin) and composition of the reaction mixture the hydrogels characterized with various features were obtained. Detailed analysis of morphology, topography, roughness and elasticity of surface performed using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and rheological measurements has shown that the topographical aspects and roughness parameter can be modulated in nanoscale regime (13-47 nm). Substrate's elasticity could be modified in a wide range (0.2-270 kPa). Biological in vitro studies on fibroblasts behavior revealed that the materials prepared provide satisfactory conditions for cell culture, ensuring their high viability, good adhesion and normal morphology. The genipin crosslinked collagen-chitosan hydrogels characterized by denser fiber structure, higher elasticity and lower surface roughness are the most attractive supports for fibroblasts cultivation. The results obtained indicate that the properties of the materials developed can be easily tailored to the needs of the given type of cells.

The promising indicators of the thermal and mechanical properties of collagen from bass and tilapia: synergistic effects of hydroxyproline and cysteine

Hydroxyproline and cysteine have a synergistic effect on both the thermal and mechanical properties of fish collagen hydrogels.