1
|
Sun M, Hu X, Tian L, Yang X, Min L. Auxetic Biomedical Metamaterials for Orthopedic Surgery Applications: A Comprehensive Review. Orthop Surg 2024; 16:1801-1815. [PMID: 38961661 PMCID: PMC11293933 DOI: 10.1111/os.14142] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 03/24/2024] [Revised: 06/03/2024] [Accepted: 06/04/2024] [Indexed: 07/05/2024] Open
Abstract
Poisson's ratio in auxetic materials shifts from typically positive to negative, causing lateral expansion during axial tension. This scale-independent characteristic, originating from tailored architectures, exhibits specific physical properties, including energy adsorption, shear resistance, and fracture resistance. These metamaterials demonstrate exotic mechanical properties with potential applications in several engineering fields, but biomedical applications seem to be one of the most relevant, with an increasing number of articles published in recent years, which present opportunities ranging from cellular repair to organ reconstruction with outstanding mechanical performance, mechanical conduction, and biological activity compared with traditional biomedical metamaterials. Therefore, focusing on understanding the potential of these structures and promoting theoretical and experimental investigations into the benefits of their unique mechanical properties is necessary for achieving high-performance biomedical applications. Considering the demand for advanced biomaterial implants in surgical technology and the profound advancement of additive manufacturing technology that are particularly relevant to fabricating complex and customizable auxetic mechanical metamaterials, this review focuses on the fundamental geometric configuration and unique physical properties of negative Poisson's ratio materials, then categorizes and summarizes auxetic material applications across some surgical departments, revealing efficacy in joint surgery, spinal surgery, trauma surgery, and sports medicine contexts. Additionally, it emphasizes the substantial potential of auxetic materials as innovative biomedical solutions in orthopedics and demonstrates the significant potential for comprehensive surgical application in the future.
Collapse
Affiliation(s)
- Minghao Sun
- Department of Orthopedic Surgery and Orthopedic Research InstituteWest China Hospital, Sichuan UniversityChengduChina
- Model Worker and Craftsman Talent Innovation Workshop of Sichuan ProvinceChengduChina
| | - Xin Hu
- Department of Orthopedic Surgery and Orthopedic Research InstituteWest China Hospital, Sichuan UniversityChengduChina
- Model Worker and Craftsman Talent Innovation Workshop of Sichuan ProvinceChengduChina
| | - Leilei Tian
- Department of AnesthesiologyWest China Hospital, Sichuan University/West China School of Nursing, Sichuan UniversityChengduChina
| | - Xiao Yang
- National Engineering Research Center for BiomaterialsSichuan UniversityChengduChina
- Provincial Engineering Research Center for Biomaterials Genome of SichuanSichuan UniversityChengduChina
| | - Li Min
- Department of Orthopedic Surgery and Orthopedic Research InstituteWest China Hospital, Sichuan UniversityChengduChina
- Model Worker and Craftsman Talent Innovation Workshop of Sichuan ProvinceChengduChina
| |
Collapse
|
2
|
Kwak JY, Jeong JY, Kwon YP, Seo DH, Kang CM, Kim DH, Han JS, Gwak EJ, Choi DS, Kim JY, Je TJ, Jeon EC. Manufacturing of stretchable substrate with biaxial strain control for highly-efficient stretchable solar cells and displays. Sci Rep 2023; 13:20460. [PMID: 37993479 PMCID: PMC10665548 DOI: 10.1038/s41598-023-47569-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2023] [Accepted: 11/15/2023] [Indexed: 11/24/2023] Open
Abstract
There has been significant research focused on the development of stretchable materials that can provide a large area with minimal material usage for use in solar cells and displays. However, most materials exhibit perpendicular shrinkage when stretched, which is particularly problematic for polymer-based substrates commonly used in stretchable devices. To address this issue, biaxial strain-controlled substrates have been proposed as a solution to increase device efficiency and conserve material resources. In this study, we present the design and fabrication of a biaxial strain-controlled substrate with a re-entrant honeycomb structure and a negative Poisson's ratio. Using a precisely machined mold with a shape error of less than 0.15%, we successfully fabricated polydimethylsiloxane substrates with a 500 μm thick re-entrant honeycomb structure, resulting in a 19.1% reduction in perpendicular shrinkage. This improvement translates to a potential increase in device efficiency by 9.44% and an 8.60% reduction in material usage for substrate fabrication. We demonstrate that this design and manufacturing method can be applied to the fabrication of efficient stretchable devices, such as solar cells and displays.
Collapse
Affiliation(s)
- Ji-Youn Kwak
- School of Materials Science and Engineering, University of Ulsan, Ulsan, 44610, Republic of Korea
- Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan, 44919, Republic of Korea
| | - Ji-Young Jeong
- Department of Nano Manufacturing Technology, Korea Institute of Machinery & Materials (KIMM), Daejeon, 34141, Republic of Korea
- Department of Nano-Mechatronics Engineering, University of Science & Technology (UST), Daejeon, 34113, Republic of Korea
| | - Ye-Pil Kwon
- School of Materials Science and Engineering, University of Ulsan, Ulsan, 44610, Republic of Korea
| | - Dong-Hyun Seo
- Department of Nano Manufacturing Technology, Korea Institute of Machinery & Materials (KIMM), Daejeon, 34141, Republic of Korea
- Department of Nano-Mechatronics Engineering, University of Science & Technology (UST), Daejeon, 34113, Republic of Korea
| | - Chung-Mo Kang
- Department of Nano Manufacturing Technology, Korea Institute of Machinery & Materials (KIMM), Daejeon, 34141, Republic of Korea
| | - Dong-Hyeon Kim
- School of Materials Science and Engineering, University of Ulsan, Ulsan, 44610, Republic of Korea
| | - Jun Sae Han
- Department of Nano Manufacturing Technology, Korea Institute of Machinery & Materials (KIMM), Daejeon, 34141, Republic of Korea
- Department of Nano-Mechatronics Engineering, University of Science & Technology (UST), Daejeon, 34113, Republic of Korea
| | - Eun-Ji Gwak
- Department of Nano Manufacturing Technology, Korea Institute of Machinery & Materials (KIMM), Daejeon, 34141, Republic of Korea
| | - Doo-Sun Choi
- Department of Nano Manufacturing Technology, Korea Institute of Machinery & Materials (KIMM), Daejeon, 34141, Republic of Korea
| | - Ju-Young Kim
- Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan, 44919, Republic of Korea.
| | - Tae-Jin Je
- Department of Nano Manufacturing Technology, Korea Institute of Machinery & Materials (KIMM), Daejeon, 34141, Republic of Korea.
| | - Eun-Chae Jeon
- School of Materials Science and Engineering, University of Ulsan, Ulsan, 44610, Republic of Korea.
| |
Collapse
|
3
|
El-Okaily MS, Mostafa AA, Dulnik J, Denis P, Sajkiewicz P, Mahmoud AA, Dawood R, Maged A. Nanofibrous Polycaprolactone Membrane with Bioactive Glass and Atorvastatin for Wound Healing: Preparation and Characterization. Pharmaceutics 2023; 15:1990. [PMID: 37514176 PMCID: PMC10384954 DOI: 10.3390/pharmaceutics15071990] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/23/2023] [Revised: 07/14/2023] [Accepted: 07/14/2023] [Indexed: 07/30/2023] Open
Abstract
Skin wound healing is one of the most challenging processes for skin reconstruction, especially after severe injuries. In our study, nanofiber membranes were prepared for wound healing using an electrospinning process, where the prepared nanofibers were made of different weight ratios of polycaprolactone and bioactive glass that can induce the growth of new tissue. The membranes showed smooth and uniform nanofibers with an average diameter of 118 nm. FTIR and XRD results indicated no chemical interactions of polycaprolactone and bioactive glass and an increase in polycaprolactone crystallinity by the incorporation of bioactive glass nanoparticles. Nanofibers containing 5% w/w of bioactive glass were selected to be loaded with atorvastatin, considering their best mechanical properties compared to the other prepared nanofibers (3, 10, and 20% w/w bioactive glass). Atorvastatin can speed up the tissue healing process, and it was loaded into the selected nanofibers using a dip-coating technique with ethyl cellulose as a coating polymer. The study of the in vitro drug release found that atorvastatin-loaded nanofibers with a 10% coating polymer revealed gradual drug release compared to the non-coated nanofibers and nanofibers coated with 5% ethyl cellulose. Integration of atorvastatin and bioactive glass with polycaprolactone nanofibers showed superior wound closure results in the human skin fibroblast cell line. The results from this study highlight the ability of polycaprolactone-bioactive glass-based fibers loaded with atorvastatin to stimulate skin wound healing.
Collapse
Affiliation(s)
- Mohamed S El-Okaily
- Refractories, Ceramics and Building Materials Department (Biomaterials Group), National Research Centre (NRC), El Bohouth St., Dokki, Giza 12622, Egypt
- Nanomedicine & Tissue Engineering Lab., Medical Research Center of Excellence (MRCE), National Research Centre (NRC), Giza 12622, Egypt
| | - Amany A Mostafa
- Refractories, Ceramics and Building Materials Department (Biomaterials Group), National Research Centre (NRC), El Bohouth St., Dokki, Giza 12622, Egypt
- Nanomedicine & Tissue Engineering Lab., Medical Research Center of Excellence (MRCE), National Research Centre (NRC), Giza 12622, Egypt
| | - Judyta Dulnik
- Laboratory of Polymers and Biomaterials, Institute of Fundamental Technological Research Polish Academy of Sciences, Pawińskiego 5b, 02-106 Warsaw, Poland
| | - Piotr Denis
- Laboratory of Polymers and Biomaterials, Institute of Fundamental Technological Research Polish Academy of Sciences, Pawińskiego 5b, 02-106 Warsaw, Poland
| | - Paweł Sajkiewicz
- Laboratory of Polymers and Biomaterials, Institute of Fundamental Technological Research Polish Academy of Sciences, Pawińskiego 5b, 02-106 Warsaw, Poland
| | - Azza A Mahmoud
- Pharmaceutics and Pharmaceutical Technology Department, Faculty of Pharmacy, Future University in Egypt, New Cairo 11835, Egypt
| | - Reham Dawood
- Microbial Biotechnology Department, Biotechnology Research Institute, National Research Centre, EL Bohouth St., Dokki, Giza 12622, Egypt
| | - Amr Maged
- Pharmaceutics and Pharmaceutical Technology Department, Faculty of Pharmacy, Future University in Egypt, New Cairo 11835, Egypt
- Pharmaceutical Factory, Faculty of Pharmacy, Future University in Egypt, New Cairo 11835, Egypt
| |
Collapse
|
4
|
Lecina-Tejero Ó, Pérez MÁ, García-Gareta E, Borau C. The rise of mechanical metamaterials: Auxetic constructs for skin wound healing. J Tissue Eng 2023; 14:20417314231177838. [PMID: 37362902 PMCID: PMC10285607 DOI: 10.1177/20417314231177838] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/21/2023] [Accepted: 05/06/2023] [Indexed: 06/28/2023] Open
Abstract
Auxetic materials are known for their unique ability to expand/contract in multiple directions when stretched/compressed. In other words, they exhibit a negative Poisson's ratio, which is usually positive for most of materials. This behavior appears in some biological tissues such as human skin, where it promotes wound healing by providing an enhanced mechanical support and facilitating cell migration. Skin tissue engineering has been a growing research topic in recent years, largely thanks to the rapid development of 3D printing techniques and technologies. The combination of computational studies with rapid manufacturing and tailored designs presents a huge potential for the future of personalized medicine. Overall, this review article provides a comprehensive overview of the current state of research on auxetic constructs for skin healing applications, highlighting the potential of auxetics as a promising treatment option for skin wounds. The article also identifies gaps in the current knowledge and suggests areas for future research. In particular, we discuss the designs, materials, manufacturing techniques, and also the computational and experimental studies on this topic.
Collapse
Affiliation(s)
- Óscar Lecina-Tejero
- Multiscale in Mechanical and Biological Engineering, Aragon Institute of Engineering Research (I3A), University of Zaragoza, Zaragoza, Aragon, Spain
| | - María Ángeles Pérez
- Multiscale in Mechanical and Biological Engineering, Aragon Institute of Engineering Research (I3A), University of Zaragoza, Zaragoza, Aragon, Spain
- Aragon Institute for Health Research (IIS Aragon), Miguel Servet University Hospital, 50009 Zaragoza, Aragon, Spain
| | - Elena García-Gareta
- Multiscale in Mechanical and Biological Engineering, Aragon Institute of Engineering Research (I3A), University of Zaragoza, Zaragoza, Aragon, Spain
- Aragon Institute for Health Research (IIS Aragon), Miguel Servet University Hospital, 50009 Zaragoza, Aragon, Spain
- Division of Biomaterials & Tissue Engineering, UCL Eastman Dental Institute, University College London, London, UK
| | - Carlos Borau
- Multiscale in Mechanical and Biological Engineering, Aragon Institute of Engineering Research (I3A), University of Zaragoza, Zaragoza, Aragon, Spain
- Centro Universitario de la Defensa de Zaragoza, Zaragoza, 50090, Spain
| |
Collapse
|
5
|
Haider MK, Kharaghani D, Sun L, Ullah S, Sarwar MN, Ullah A, Khatri M, Yoshiko Y, Gopiraman M, Kim IS. Synthesized bioactive lignin nanoparticles/polycaprolactone nanofibers: A novel nanobiocomposite for bone tissue engineering. BIOMATERIALS ADVANCES 2022; 144:213203. [PMID: 36436430 DOI: 10.1016/j.bioadv.2022.213203] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/23/2022] [Revised: 11/04/2022] [Accepted: 11/16/2022] [Indexed: 11/23/2022]
Abstract
The use of artificial biomaterial with enhanced bioactivity for osteostimulation is a major research concern at present days. In this research, antibacterial and osteostimulative core-shell lignin nanoparticles (LgNP) were synthesized from alkali lignin using tetrahydrofuran (THF) as solvent via a simultaneous pH and solvent shifting technology. Later, LgNP-loaded polycaprolactone (PCL) composite nanofibers were fabricated via the electrospinning technique. The addition of LgNP significantly increased the diameter of the nanofibers, ranging from 400 to 2200 nm. The addition of LgNP reduced the mechanical performance, crystallinity, and porosity of the nanofibers while improving surface wetting and swelling properties of the inherently hydrophobic PCL polymer. The prepared nanofibers showed excellent bactericidal efficacy against major bone infectious Gram-positive Staphylococcus aureus bacterial strains. The incorporation of LgNP imparted superior antioxidant activity and boosted the biodegradation process of the nanofibers. The deposition of biomineral apatite with platelet-like clustered protrusions having a Ca/P ratio of 1.67 was observed while incubating the scaffold in simulated body fluid. Based on the results of the LDH and WST-1 assay, it was demonstrated that the composite nanofibers are non-toxic to pre-osteoblastic cell line (MC3T3-E1) when they are placed in direct contact with the LgNP/PCL scaffold nanofibers. The MC3T3-E1 cells exhibited excellent proliferation and attachment on the prepared composite scaffold via filopodial and lamellipodial expansion with cell-secreted Ca deposition. According to the alkaline phosphatase activity test, LgNP/PCL nanofiber scaffolds significantly improved osteogenic differentiation of MC3T3-E1 cells compared to neat PCL nanofibers. Overall, our findings suggest that LgNP/PCL nanofiber scaffold could be a promising functional biomaterial for bone tissue engineering.
Collapse
Affiliation(s)
- Md Kaiser Haider
- Nano Fusion Technology Research Group, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, Tokida 3-15-1, Ueda, Nagano 386-8567, Japan
| | - Davood Kharaghani
- Department of Calcified Tissue Biology, Graduate School of Biomedical and Health Sciences, Hiroshima University, 1-2-3 Kasumi, Minami-ku, Hiroshima 734-8553, Japan
| | - Lei Sun
- Nano Fusion Technology Research Group, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, Tokida 3-15-1, Ueda, Nagano 386-8567, Japan
| | - Sana Ullah
- Nano Fusion Technology Research Group, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, Tokida 3-15-1, Ueda, Nagano 386-8567, Japan
| | - Mohammad Nauman Sarwar
- Nano Fusion Technology Research Group, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, Tokida 3-15-1, Ueda, Nagano 386-8567, Japan
| | - Azeem Ullah
- Nano Fusion Technology Research Group, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, Tokida 3-15-1, Ueda, Nagano 386-8567, Japan
| | - Muzamil Khatri
- Department of Chemistry and Materials, Faculty of Textile Science and Technology, Shinshu University, 3-15-1, Tokida, Ueda, Nagano 386-8567, Japan
| | - Yuji Yoshiko
- Department of Calcified Tissue Biology, Graduate School of Biomedical and Health Sciences, Hiroshima University, 1-2-3 Kasumi, Minami-ku, Hiroshima 734-8553, Japan
| | - Mayakrishnan Gopiraman
- Nano Fusion Technology Research Group, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, Tokida 3-15-1, Ueda, Nagano 386-8567, Japan
| | - Ick Soo Kim
- Nano Fusion Technology Research Group, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, Tokida 3-15-1, Ueda, Nagano 386-8567, Japan.
| |
Collapse
|
6
|
Pebdeni AB, Hosseini M, Barkhordari A. Smart fluorescence aptasensor using nanofiber functionalized with carbon quantum dot for specific detection of pathogenic bacteria in the wound. Talanta 2022; 246:123454. [DOI: 10.1016/j.talanta.2022.123454] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2022] [Revised: 03/31/2022] [Accepted: 04/03/2022] [Indexed: 01/23/2023]
|
7
|
Veerabagu U, Palza H, Quero F. Review: Auxetic Polymer-Based Mechanical Metamaterials for Biomedical Applications. ACS Biomater Sci Eng 2022; 8:2798-2824. [PMID: 35709523 DOI: 10.1021/acsbiomaterials.2c00109] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Over the last three decades but more particularly during the last 5 years, auxetic mechanical metamaterials constructed from precisely architected polymer-based materials have attracted considerable attention due to their fascinating mechanical properties. These materials present a negative Poisson's ratio and therefore unusual mechanical behavior, which has resulted in enhanced static modulus, energy adsorption, and shear resistance, as compared with the bulk properties of polymers. Novel advanced polymer processing and fabrication techniques, and in particular additive manufacturing, allow one to design complex and customizable polymer architectures that are particularly relevant to fabricate auxetic mechanical metamaterials. Although these metamaterials exhibit exotic mechanical properties with potential applications in several engineering fields, biomedical applications seem to be one of the most relevant with a growing number of articles published over recent years. As a result, special focus is needed to understand the potential of these structures and foster theoretical and experimental investigations on the potential benefits of the unusual mechanical properties of these materials on the way to high performance biomedical applications. The present Review provides up to date information on the recent progress of polymer-based auxetic mechanical metamaterials mainly fabricated using additive manufacturing methods with a special focus toward biomedical applications including tissue engineering as well as medical devices including stents and sensors.
Collapse
Affiliation(s)
- Udayakumar Veerabagu
- Laboratorio de Nanocelulosa y Biomateriales, Departamento de Ingeniería Química, Biotecnología y Materiales, Facultad de Ciencias Físicas y Matemáticas, Universidad de Chile, Avenida Beauchef 851, Santiago 8370456, Chile
| | - Humberto Palza
- Laboratorio de Ingeniería de Polímeros, Departamento de Ingeniería Química, Biotecnología y Materiales, Facultad de Ciencias Físicas y Matemáticas, Universidad de Chile, Avenida Beauchef 851, Santiago 8370456, Chile.,IMPACT, Center of Interventional Medicine for Precision and Advanced Cellular Therapy, Avenida Beauchef 851, Santiago 8370456, Chile.,Millennium Nucleus on Smart Soft Mechanical Metamaterials, Avenida Beauchef 851, Santiago 8370456, Chile
| | - Franck Quero
- Laboratorio de Nanocelulosa y Biomateriales, Departamento de Ingeniería Química, Biotecnología y Materiales, Facultad de Ciencias Físicas y Matemáticas, Universidad de Chile, Avenida Beauchef 851, Santiago 8370456, Chile.,Millennium Nucleus on Smart Soft Mechanical Metamaterials, Avenida Beauchef 851, Santiago 8370456, Chile
| |
Collapse
|
8
|
Leung MSH, Yick KL, Sun Y, Chow L, Ng SP. 3D printed auxetic heel pads for patients with diabetic mellitus. Comput Biol Med 2022; 146:105582. [PMID: 35588678 DOI: 10.1016/j.compbiomed.2022.105582] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/03/2022] [Revised: 03/29/2022] [Accepted: 04/30/2022] [Indexed: 11/03/2022]
Abstract
More than 422 million people worldwide suffered from diabetes mellitus (DM) in 2021. Diabetic foot is one the most critical complications resultant of DM. Foot ulceration and infection are frequently arisen, which are associated with changes in the mechanical properties of the plantar soft tissues, peripheral arterial disease, and sensory neuropathy. Diabetic insoles are currently the mainstay in reducing the risk of foot ulcers by reducing the magnitude of the pressure on the plantar Here, we propose a novel pressure relieving heel pad based on a circular auxetic re-entrant honeycomb structure by using three-dimensional (3D) printing technology to minimize the pressure on the heel, thus reducing the occurrence of foot ulcers. Finite element models (FEMs) are developed to evaluate the structural changes of the developed circular auxetic structure upon exertion of compressive forces. Moreover, the effects of the internal angle of the re-entrant structure on the peak contact force and the mean pressure acting on the heel as well as the contact area between the heel and the pads are investigated through a finite element analysis (FEA). Based on the result from the validated FEMs, the proposed heel pad with an auxetic structure demonstrates a distinct reduction in the peak contact force (∼10%) and the mean pressure (∼14%) in comparison to a conventional diabetic insole (PU foam). The characterized result of the designed circular auxetic structure not only provides new insights into diabetic foot protection, but also the design and development of various impact resistance products.
Collapse
Affiliation(s)
- Matthew Sin-Hang Leung
- The Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China; Laboratory for Artificial Intelligence in Design, Hong Kong Science Park, New Territories, Hong Kong, China
| | - Kit-Lun Yick
- The Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China; Laboratory for Artificial Intelligence in Design, Hong Kong Science Park, New Territories, Hong Kong, China.
| | - Yue Sun
- School of Fashion Design & Engineering, Zhejiang Sci-Tech University, Hangzhou City, Zhejiang Province, China
| | - Lung Chow
- The Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
| | - Sun-Pui Ng
- Hong Kong Community College, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
| |
Collapse
|
9
|
Auxetic Metamaterials for Biomedical Devices: Current Situation, Main Challenges, and Research Trends. MATERIALS 2022; 15:ma15041439. [PMID: 35207976 PMCID: PMC8874587 DOI: 10.3390/ma15041439] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/07/2022] [Revised: 02/05/2022] [Accepted: 02/08/2022] [Indexed: 01/23/2023]
Abstract
Auxetic metamaterials are characterized by a negative Poisson ratio (NPR) and display an unexpected property of lateral expansion when stretched and densification when compressed. Auxetic properties can be achieved by designing special microstructures, hence their classification as metamaterials, and can be manufactured with varied raw materials and methods. Since work in this field began, auxetics have been considered for different biomedical applications, as some biological tissues have auxetic-like behaviour due to their lightweight structure and morphing properties, which makes auxetics ideal for interacting with the human body. This research study is developed with the aim of presenting an updated overview of auxetic metamaterials for biomedical devices. It stands out for providing a comprehensive view of medical applications for auxetics, including a focus on prosthetics, orthotics, ergonomic appliances, performance enhancement devices, in vitro medical devices for interacting with cells, and advanced medicinal clinical products, especially tissue engineering scaffolds with living cells. Innovative design and simulation approaches for the engineering of auxetic-based products are covered, and the relevant manufacturing technologies for prototyping and producing auxetics are analysed, taking into consideration those capable of processing biomaterials and enabling multi-scale and multi-material auxetics. An engineering design rational for auxetics-based medical devices is presented with integrative purposes. Finally, key research, development and expected technological breakthroughs are discussed.
Collapse
|
10
|
Auxetic Structures for Tissue Engineering Scaffolds and Biomedical Devices. MATERIALS 2021; 14:ma14226821. [PMID: 34832223 PMCID: PMC8621588 DOI: 10.3390/ma14226821] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/14/2021] [Revised: 11/07/2021] [Accepted: 11/10/2021] [Indexed: 11/16/2022]
Abstract
An auxetic structure utilizing a negative Poisson's ratio, which can expand transversally when axially expanded under tensional force, has not yet been studied in the tissue engineering and biomedical area. However, the recent advent of new technologies, such as additive manufacturing or 3D printing, has showed prospective results aimed at producing three-dimensional structures. Auxetic structures are fabricated by additive manufacturing, soft lithography, machining technology, compressed foaming, and textile fabrication using various biomaterials, including poly(ethylene glycol diacrylate), polyurethane, poly(lactic-glycolic acid), chitosan, hydroxyapatite, and using a hard material such as a silicon wafer. After fabricating the scaffold with an auxetic effect, researchers have cultured fibroblasts, osteoblasts, chondrocytes, myoblasts, and various stem cells, including mesenchymal stem cells, bone marrow stem cells, and embryonic stem cells. Additionally, they have shown new possibilities as scaffolds through tissue engineering by cell proliferation, migration, alignment, differentiation, and target tissue regeneration. In addition, auxetic structures and their unique deformation characteristics have been explored in several biomedical devices, including implants, stents, and surgical screws. Although still in the early stages, the auxetic structure, which can create mechanical properties tailored to natural tissue by changing the internal architecture of the structure, is expected to show an improved tissue reconstruction ability. In addition, continuous research at the cellular level using the auxetic micro and nano-environment could provide a breakthrough for tissue reconstruction.
Collapse
|
11
|
Patel PR, Pandey K, Killi N, Gundloori RVN. Manipulating hydrophobicity of polyester nanofiber mats with egg albumin to enhance cell interactions. POLYM ENG SCI 2021. [DOI: 10.1002/pen.25776] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Affiliation(s)
- Pratikshkumar R. Patel
- Polymer Science and Engineering CSIR‐National Chemical Laboratory Pune Maharashtra India
- Academy of Scientific and Innovative Research (AcSIR) Ghaziabad Uttar Pradesh India
| | - Komal Pandey
- Polymer Science and Engineering CSIR‐National Chemical Laboratory Pune Maharashtra India
| | - Naresh Killi
- Polymer Science and Engineering CSIR‐National Chemical Laboratory Pune Maharashtra India
- Academy of Scientific and Innovative Research (AcSIR) Ghaziabad Uttar Pradesh India
| | - Rathna Venkata Naga Gundloori
- Polymer Science and Engineering CSIR‐National Chemical Laboratory Pune Maharashtra India
- Academy of Scientific and Innovative Research (AcSIR) Ghaziabad Uttar Pradesh India
| |
Collapse
|
12
|
Mohammadzadeh L, Mahkam M, Barzegari A, Karimi A, Kafil HS, Salehi R, Rahbarghazi R. Preparation, characterization, and antibacterial properties of hybrid nanofibrous scaffolds for cutaneous tissue engineering. Hum Cell 2021; 34:1682-1696. [PMID: 34533763 DOI: 10.1007/s13577-021-00588-y] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/16/2021] [Accepted: 07/31/2021] [Indexed: 12/17/2022]
Abstract
Since polymeric nanofibrous scaffolds have been widely used in tissue regeneration, the risk of bacterial infections should not be neglected. In the present work, poly-caprolactone-silk fibroin-soluble eggshell membrane-silver nanoparticles (PCL-SF-SESM-AgNPs) and caprolactone-silk fibroin-soluble eggshell membrane-chitosan (PCL-SF-SESM-CS) scaffolds were fabricated via the electrospinning method for cutaneous regeneration. The composition, morphology, hydrophilicity, and mechanical features of prepared scaffolds were evaluated using Fourier transform infrared (FT-IR), scanning electron microscope (SEM), tensile, and water contact angle tests. The existence of AgNPs in PCL/SF/SESM/AgNPs nanofibers was confirmed by UV-visible, Transmission electron microscopes (TEM), and X-Ray Diffraction (XRD) patterns. Besides, cell adhesion, proliferation, and differentiation process of cutaneous progenitor cells, namely basal cell carcinoma (BCCs), toward keratinocyte-like cells were evaluated using MTT analysis, DAPI, Immunofluorescence imaging (IF), and Real-Time Quantitative Reverse Transcription PCR (QRT-PCR) assay. The results indicated that prepared nanofibrous mats are appropriate candidates for cutaneous regeneration and in advanced in vivo applications could be used. Lastly, the antimicrobial potential of prepared nanofibers against microorganisms such as E. coli, S. aureus, and C. Albicans was analyzed using the disc diffusion method. Results revealed that chitosan-containing nanofibrous scaffolds indicate inhibition against S. aureus, but PCL-SF-SESM as control group not. In addition, against C. albicans any antifungal activity was not observed.
Collapse
Affiliation(s)
- Leila Mohammadzadeh
- Chemistry Department, Faculty of Science, Azarbaijan Shahid Madani University, Tabriz, Iran
| | - Mehrdad Mahkam
- Chemistry Department, Faculty of Science, Azarbaijan Shahid Madani University, Tabriz, Iran
| | - Abolfazl Barzegari
- Research Center for Pharmaceutical Nanotechnology, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Abbas Karimi
- Department of Molecular Medicine, Faculty of Advanced Medical Sciences, Tabriz University of Medical Sciences,, Tabriz, Iran
| | - Hossein Samadi Kafil
- Drug Applied Research Center, Tabriz University of Medical Science, Tabriz, Iran
| | - Roya Salehi
- Drug Applied Research Center and Department of Medical Nanotechnology, Faculty of Advanced Medical Science, Tabriz University of Medical Science, Tabriz, Iran.
| | - Reza Rahbarghazi
- Stem Cell Research Center, Tabriz University of Medical Sciences, Tabriz, Iran. .,Department of Applied Cell Sciences, Faculty of Advanced Medical Sciences, Tabriz University of Medical Sciences, Tabriz, Iran.
| |
Collapse
|
13
|
Rhyou J, Youn J, Eom S, Kim DS. Facile Fabrication of Electrospun Nanofiber Membrane-Integrated PDMS Microfluidic Chip via Silver Nanowires-Uncured PDMS Adhesive Layer. ACS Macro Lett 2021; 10:965-970. [PMID: 35549208 DOI: 10.1021/acsmacrolett.1c00256] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
Although direct electrospinning has been frequently utilized to develop a nanofiber membrane-integrated microfluidic chip, the dielectric substrate material retards the deposition of electrospun nanofibers on the substrate, and the rough surface formed by deposited nanofibers hinders the successful sealing. In this study we introduce a facile fabrication process of an electrospun nanofiber membrane-integrated polydimethylsiloxane (PDMS) microfluidic chip, called a NFM-PDMS chip, by applying the functional layer. The functional layer consists of a silver nanowires (AgNWs)-embedded uncured PDMS adhesive layer (SNUP), which not only effectively concentrates the electric field toward the PDMS substrate, but also provides a smooth surface for robust sealing. The AgNWs in the SNUP play a crucial role as a grounded collector and enable approximately 4× faster electrospinning than the conventional method, forming a free-standing nanofiber membrane. The uncured PDMS adhesive layer in the SNUP maintains the smooth surface after electrospinning and allows the rapid and leakage-free bonding of the NFM-PDMS chip using plasma treatment. A practical application of the NFM-PDMS chip is demonstrated by culturing the human keratinocyte cell line, HaCaT cells. The HaCaT cells are well grown on the free-standing nanofiber membrane under dynamic flow conditions, maintaining good viability over 95% for 7 days of culture.
Collapse
Affiliation(s)
- Junyeol Rhyou
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), 77, Cheongam-ro, Nam-gu, Pohang, Gyeongbuk 37673, Republic of Korea
| | - Jaeseung Youn
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), 77, Cheongam-ro, Nam-gu, Pohang, Gyeongbuk 37673, Republic of Korea
| | - Seongsu Eom
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), 77, Cheongam-ro, Nam-gu, Pohang, Gyeongbuk 37673, Republic of Korea
| | - Dong Sung Kim
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), 77, Cheongam-ro, Nam-gu, Pohang, Gyeongbuk 37673, Republic of Korea
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), 77, Cheongam-ro, Nam-gu, Pohang, Gyeongbuk 37673, Republic of Korea
- Institute for Convergence Research and Education in Advanced Technology, Yonsei University, 50,
Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea
| |
Collapse
|
14
|
Lin C, Liu L, Liu Y, Leng J. Recent developments in next-generation occlusion devices. Acta Biomater 2021; 128:100-119. [PMID: 33964482 DOI: 10.1016/j.actbio.2021.04.050] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/11/2020] [Revised: 04/01/2021] [Accepted: 04/26/2021] [Indexed: 12/20/2022]
Abstract
Transcatheter closure has been widely accepted as a highly effective way to treat abnormal blood flows and/or embolization of thrombus in the heart. It allows the closure of four types of congenital heart defects (CHDs) and stroke-associated left atrial appendage (LAA). The four types of CHDs include atrial septal defect (ASD), patent foramen ovale (PFO), patent ductus arteriosus (PDA), and ventricular septal defect (VSD). Advancements in the materials and configurations of occlusion devices have spurred the transition from open-heart surgery with high complexity and morbidity, or lifelong medication with a high risk of bleeding, to minimally invasive deployment. A variety of occlusion devices have been developed over the past few decades, particularly novel ones represented by biodegradable and 3D-printed occlusion devices, which are considered as next-generation alternatives to conventional Nitinol-based occlusion devices due to biodegradability, customization, and improved biocompatibility. The aim here is to comprehensively review the next-generation occlusion devices in terms of materials, configurations, manufacturing methods, deployment strategies, and (if available) experimental results or clinical data. The current challenges and the direction of future work are also proposed. STATEMENT OF SIGNIFICANCE: Implantation of occlusion devices has become a widely accepted and highly effective treatment for occluding abnormal blood/thrombus flow within the heart. Due to the serious complications such as erosion and displacement of conventional Nitinol-based occluders, next-generation occluders with reduced risk of complications and improved biocompatibility has emerged. Here, we comprehensively review the next-generation occluders developed for atrial septal defect (ASD), patent foramen ovale (PFO), patent ductus arteriosus (PDA), ventricular septal defect (VSD), and left atrial appendage (LAA), with special emphasis on biodegradable occluders. Besides, intelligent materials (e.g., automatically deployable shape memory polymers) and rapid customized manufacturing methods (3D/4D printing) for the fabrication of occluders are also introduced. Lastly, the directions of future work are highlighted.
Collapse
Affiliation(s)
- Cheng Lin
- Department of Astronautical Science and Mechanics, Harbin Institute of Technology (HIT), P.O. Box 301, No. 92 West Dazhi Street, Harbin 150001, People's Republic of China
| | - Liwu Liu
- Department of Astronautical Science and Mechanics, Harbin Institute of Technology (HIT), P.O. Box 301, No. 92 West Dazhi Street, Harbin 150001, People's Republic of China.
| | - Yanju Liu
- Department of Astronautical Science and Mechanics, Harbin Institute of Technology (HIT), P.O. Box 301, No. 92 West Dazhi Street, Harbin 150001, People's Republic of China
| | - Jinsong Leng
- Center for Composite Materials and Structures, Harbin Institute of Technology (HIT), P.O. Box 3011, No. 2 Yikuang Street, Harbin 150080, People's Republic of China.
| |
Collapse
|
15
|
Cheng L, Suresh K S, He H, Rajput RS, Feng Q, Ramesh S, Wang Y, Krishnan S, Ostrovidov S, Camci-Unal G, Ramalingam M. 3D Printing of Micro- and Nanoscale Bone Substitutes: A Review on Technical and Translational Perspectives. Int J Nanomedicine 2021; 16:4289-4319. [PMID: 34211272 PMCID: PMC8239380 DOI: 10.2147/ijn.s311001] [Citation(s) in RCA: 27] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2021] [Accepted: 05/17/2021] [Indexed: 12/19/2022] Open
Abstract
Recent developments in three-dimensional (3D) printing technology offer immense potential in fabricating scaffolds and implants for various biomedical applications, especially for bone repair and regeneration. As the availability of autologous bone sources and commercial products is limited and surgical methods do not help in complete regeneration, it is necessary to develop alternative approaches for repairing large segmental bone defects. The 3D printing technology can effectively integrate different types of living cells within a 3D construct made up of conventional micro- or nanoscale biomaterials to create an artificial bone graft capable of regenerating the damaged tissues. This article reviews the developments and applications of 3D printing in bone tissue engineering and highlights the numerous conventional biomaterials and nanomaterials that have been used in the production of 3D-printed scaffolds. A comprehensive overview of the 3D printing methods such as stereolithography (SLA), selective laser sintering (SLS), fused deposition modeling (FDM), and ink-jet 3D printing, and their technical and clinical applications in bone repair and regeneration has been provided. The review is expected to be useful for readers to gain an insight into the state-of-the-art of 3D printing of bone substitutes and their translational perspectives.
Collapse
Affiliation(s)
- Lijia Cheng
- School of Basic Medicine, Chengdu University, Chengdu, 610106, People’s Republic of China
| | - Shoma Suresh K
- Biomaterials and Organ Engineering Group, Centre for Biomaterials, Cellular, and Molecular Theranostics, School of Bio Sciences and Technology, Vellore Institute of Technology, Vellore, Tamil Nadu, 632014, India
| | - Hongyan He
- School of Basic Medicine, Chengdu University, Chengdu, 610106, People’s Republic of China
| | - Ritu Singh Rajput
- Biomaterials and Organ Engineering Group, Centre for Biomaterials, Cellular, and Molecular Theranostics, School of Bio Sciences and Technology, Vellore Institute of Technology, Vellore, Tamil Nadu, 632014, India
| | - Qiyang Feng
- School of Basic Medicine, Chengdu University, Chengdu, 610106, People’s Republic of China
| | - Saravanan Ramesh
- Biomaterials and Organ Engineering Group, Centre for Biomaterials, Cellular, and Molecular Theranostics, School of Bio Sciences and Technology, Vellore Institute of Technology, Vellore, Tamil Nadu, 632014, India
| | - Yuzhuang Wang
- School of Basic Medicine, Chengdu University, Chengdu, 610106, People’s Republic of China
| | - Sasirekha Krishnan
- Biomaterials and Organ Engineering Group, Centre for Biomaterials, Cellular, and Molecular Theranostics, School of Bio Sciences and Technology, Vellore Institute of Technology, Vellore, Tamil Nadu, 632014, India
| | - Serge Ostrovidov
- Department of Radiological Sciences, University of California Los Angeles, Los Angeles, CA, 90095, USA
| | - Gulden Camci-Unal
- Department of Chemical Engineering, University of Massachusetts Lowell, Lowell, MA, 01854, USA
| | - Murugan Ramalingam
- Biomaterials and Organ Engineering Group, Centre for Biomaterials, Cellular, and Molecular Theranostics, School of Bio Sciences and Technology, Vellore Institute of Technology, Vellore, Tamil Nadu, 632014, India
| |
Collapse
|
16
|
Sowmya B, Hemavathi AB, Panda PK. Poly (ε-caprolactone)-based electrospun nano-featured substrate for tissue engineering applications: a review. Prog Biomater 2021; 10:91-117. [PMID: 34075571 PMCID: PMC8271057 DOI: 10.1007/s40204-021-00157-4] [Citation(s) in RCA: 38] [Impact Index Per Article: 12.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/17/2021] [Accepted: 05/15/2021] [Indexed: 12/27/2022] Open
Abstract
The restoration of normal functioning of damaged body tissues is one of the major objectives of tissue engineering. Scaffolds are generally used as artificial supports and as substrates for regenerating new tissues and should closely mimic natural extracellular matrix (ECM). The materials used for fabricating scaffolds must be biocompatible, non-cytotoxic and bioabsorbable/biodegradable. For this application, specifically biopolymers such as PLA, PGA, PTMC, PCL etc. satisfying the above criteria are promising materials. Poly(ε-caprolactone) (PCL) is one such potential candidate which can be blended with other materials forming blends, copolymers and composites with the essential physiochemical and mechanical properties as per the requirement. Nanofibrous scaffolds are fabricated by various techniques such as template synthesis, fiber drawing, phase separation, self-assembly, electrospinning etc. Among which electrospinning is the most popular and versatile technique. It is a clean, simple, tunable and viable technique for fabrication of polymer-based nanofibrous scaffolds. The design and fabrication of electrospun nanofibrous scaffolds are of intense research interest over the recent years. These scaffolds offer a unique architecture at nano-scale with desired porosity for selective movement of small molecules and form a suitable three-dimensional matrix similar to ECM. This review focuses on PCL synthesis, modifications, properties and scaffold fabrication techniques aiming at the targeted tissue engineering applications.
Collapse
Affiliation(s)
- B Sowmya
- Materials Science Division, CSIR - National Aerospace Laboratories, Bangalore, 560017, India
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, India
| | - A B Hemavathi
- Department of Polymer Science and Technology, Sri Jayachamarajendra College of Engineering, JSS Science and Technology University, Mysuru, 570 006, India
| | - P K Panda
- Materials Science Division, CSIR - National Aerospace Laboratories, Bangalore, 560017, India.
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, India.
| |
Collapse
|
17
|
Liu X, Liu Y, Du J, Li X, Yu J, Ding B. Breathable, stretchable and adhesive nanofibrous hydrogels as wound dressing materials. ENGINEERED REGENERATION 2021. [DOI: 10.1016/j.engreg.2021.05.001] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022] Open
|
18
|
Fabrication and characterization of core–shell TiO2-containing nanofibers of PCL-zein by coaxial electrospinning method as an erythromycin drug carrier. Polym Bull (Berl) 2021. [DOI: 10.1007/s00289-021-03591-3] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
|
19
|
Douglass M, Hopkins S, Pandey R, Singha P, Norman M, Handa H. S-Nitrosoglutathione-Based Nitric Oxide-Releasing Nanofibers Exhibit Dual Antimicrobial and Antithrombotic Activity for Biomedical Applications. Macromol Biosci 2021; 21:e2000248. [PMID: 33021079 PMCID: PMC7855517 DOI: 10.1002/mabi.202000248] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/17/2020] [Revised: 09/07/2020] [Indexed: 12/20/2022]
Abstract
The novel use of nanofibers as a physical barrier between blood and medical devices has allowed for modifiable, innovative surface coatings on devices ordinarily plagued by thrombosis, delayed healing, and chronic infection. In this study, the nitric oxide (NO) donor S-nitrosoglutathione (GSNO) is blended with the biodegradable polymers polyhydroxybutyrate (PHB) and polylactic acid (PLA) for the fabrication of hemocompatible, antibacterial nanofibers tailored for blood-contacting applications. Stress/strain behavior of different concentrations of PHB and PLA is recorded to optimize the mechanical properties of the nanofibers. Nanofibers incorporated with different concentrations of GSNO (10, 15, 20 wt%) are evaluated based on their NO-releasing kinetics. PLA/PHB + 20 wt% GSNO nanofibers display the greatest NO release over 72 h (0.4-1.5 × 10-10 mol mg-1 min-1 ). NO-releasing fibers successfully reduce viable adhered bacterial counts by ≈80% after 24 h of exposure to Staphylococcus aureus. NO-releasing nanofibers exposed to porcine plasma reduce platelet adhesion by 64.6% compared to control nanofibers. The nanofibers are found noncytotoxic (>95% viability) toward NIH/3T3 mouse fibroblasts, and 4',6-diamidino-2-phenylindole and phalloidin staining shows that fibroblasts cultured on NO-releasing fibers have improved cellular adhesion and functionality. Therefore, these novel NO-releasing nanofibers provide a safe antimicrobial and hemocompatible coating for blood-contacting medical devices.
Collapse
Affiliation(s)
- Megan Douglass
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA, USA
| | - Sean Hopkins
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA, USA
| | - Rashmi Pandey
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA, USA
| | - Priya Singha
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA, USA
| | - Megan Norman
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA, USA
| | - Hitesh Handa
- School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA, USA
| |
Collapse
|
20
|
Wang R, Zhu J, Jiang G, Sun Y, Ruan L, Li P, Cui H. Forward Wound Closure with Regenerated Silk Fibroin and Polylysine-Modified Chitosan Composite Bioadhesives as Dressings. ACS APPLIED BIO MATERIALS 2020; 3:7941-7951. [PMID: 35019534 DOI: 10.1021/acsabm.0c01064] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
Abstract
Wound dressing has been used for decades to be effective for accelerating skin wound healing. However, practical applications are still limited due to their lower cell affinity, tissue adhesiveness, and biocompatibility. Natural polymers are the important biomaterials because of their excellent biodegradability, biocompatibility, and low immunogenicity. In this work, the composite bioadhesives (PLS-CS/RSF) were prepared from regenerated silk fibroin (RSF) and polylysine-modified chitosan (PLS-CS) that were cross-linked by Ca2+ ions. The adhesion property tests showed that the PLS-CS/RSF exhibited excellent bonding potentials for various substrates, and the adhesive strength was up to 70 kPa for isolated porcine skin by the extension test. The as-prepared PLS-CS/RSF was nontoxic, displayed obvious antibacterial effects against Staphylococcus aureus and Escherichia coli in vitro, and their bacteriostasis rates were 100% after 120 min treatment. In addition, the PLS-CS/RSF exhibited favorable cytocompatibility by cell counting kit-8 assay. The animal model of wound closure results showed that PLS-CS/RSF can promote wound closure and the integrity of wound healing, inhibiting the secretion of inflammatory factor and tumor necrosis factor and stimulating vascular factor and α-smooth muscle actin to the release of vascular growth factor and promote angiogenesis during the process of wound healing by immunohistochemical assay.
Collapse
Affiliation(s)
- Ruofan Wang
- Department of Polymer Materials, School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
| | - Jiangying Zhu
- Department of Polymer Materials, School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
| | - Guohua Jiang
- Department of Polymer Materials, School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
| | - Yanfang Sun
- College of Life Science and Medicine, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
| | - Liming Ruan
- Department of Dermatology, Beilun District People's Hospital of Ningbo City, Ningbo 315800, China
| | - Pengfei Li
- Department of Polymer Materials, School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
| | - Haiyan Cui
- Department of Plastic Surgery, Tongji Hospital of Tongji University, Shanghai 200065, China
| |
Collapse
|
21
|
Mondésert H, Bossard F, Favier D. Anisotropic electrospun honeycomb polycaprolactone scaffolds: Elaboration, morphological and mechanical properties. J Mech Behav Biomed Mater 2020; 113:104124. [PMID: 33091720 DOI: 10.1016/j.jmbbm.2020.104124] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/07/2020] [Revised: 09/01/2020] [Accepted: 09/28/2020] [Indexed: 12/12/2022]
Abstract
Tissue engineering technology requires porous scaffolds, based on biomaterials, which have to mimic as closely as possible the morphological and anisotropic mechanical properties of the native tissue to substitute. Anisotropic fibrous scaffolds fabricated by template-assisted electrospinning are investigated in this study. Fibers of electrospun Polycaprolactone (PCL) were successfully arranged spatially into honeycomb structures by using well-shaped 3D micro-architected metal collectors. Fibrous scaffolds present 2 × 4 mm2 wide elementary patterns with low and high fiber density areas. Distinct regions of the honeycomb patterns were analyzed through SEM images revealing different fiber diameters with specific fiber orientation depending on the regions of interest. Tensile test experiments were carried out with an optical observation of the local deformation at the pattern scale, allowing the determination and analysis, at small and large deformation, of the axial and transverse local strains. The honeycomb patterned mats showed significantly different mechanical properties along the two orthogonal directions probing an anisotropic ratio of 4.2. Stress relaxation test was performed on scaffolds at 15% of strain. This measurement pointed out the low contribution of the viscosity of about 20% in the mechanical response of the scaffold. An orthotropic linear elastic model was consequently proposed to characterize the anisotropic behavior of the produced patterned membranes. This new versatile method to produce architected porous materials, adjustable to several polymers and structures, will provide appealing benefits for soft regenerative medicine application and the development of custom-made scaffolds.
Collapse
Affiliation(s)
- Hugues Mondésert
- Univ. Grenoble Alpes, CNRS, Grenoble INP(1), LRP, Grenoble, 38000, France; Univ. Grenoble Alpes, CNRS, CHU Grenoble Alpes, Grenoble INP(1), TIMC-IMAG, Grenoble, 38000, France
| | - Frédéric Bossard
- Univ. Grenoble Alpes, CNRS, Grenoble INP(1), LRP, Grenoble, 38000, France.
| | - Denis Favier
- Univ. Grenoble Alpes, CNRS, CHU Grenoble Alpes, Grenoble INP(1), TIMC-IMAG, Grenoble, 38000, France
| |
Collapse
|
22
|
Kashte S, Sharma RK, Kadam S. Layer-by-layer decorated herbal cell compatible scaffolds for bone tissue engineering: A synergistic effect of graphene oxide and Cissus quadrangularis. J BIOACT COMPAT POL 2020. [DOI: 10.1177/0883911519894667] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
Among various bone regenerative and repair methods, use of osteoinductive scaffold as bone grafts/substitute has gained wide importance worldwide. To develop such osteoinductive scaffold that is more natural and which spontaneously stimulates osteoblast formation without any differentiation media, we prepared electrospun poly ε-caprolactone scaffold which is further modified by means of layer-by-layer method using Cissus quadrangularis callus culture extract and graphene oxide (PCL-GO-CQ). The modified PCL-GO-CQ scaffold was compared with plain poly ε-caprolactone scaffold and poly ε-caprolactone coated only with graphene oxide. Physical properties, such as roughness, wettability, yield strength and tensile strength, of PCL-GO-CQ scaffold were found to be superior. Also, PCL-GO-CQ scaffold showed more in vitro cell compatibility with enhanced cellular proliferation on its surface. Presence of graphene oxide and Cissus quadrangularis callus in scaffold helped in the differentiation of human umbilical cord Wharton’s jelly-derived mesenchymal stem cells into osteogenic lineage without any differentiation media in less than 20 days. The synergistic effect of Cissus quadrangularis callus extract and graphene oxide in PCL-GO-CQ scaffold enhanced osteoblastic differentiation, osteoconduction and osteoinduction potential of scaffolds making them highly potential in bone regeneration and bone tissue engineering applications.
Collapse
Affiliation(s)
- Shivaji Kashte
- Department of Stem cell and Regenerative medicine, Center for Interdisciplinary Research, D. Y. Patil Education Society (Deemed to be University), Kolhapur, India
| | - RK Sharma
- D. Y. Patil Medical College, D. Y. Patil Education Society (Deemed to be University), Kolhapur, India
| | - Sachin Kadam
- Department of Stem cell and Regenerative medicine, Center for Interdisciplinary Research, D. Y. Patil Education Society (Deemed to be University), Kolhapur, India
- Advancells Group, NOIDA, India
| |
Collapse
|
23
|
Dudek MR, Dudek KK, Wolak W, Wojciechowski KW, Grima JN. Magnetocaloric materials with ultra-small magnetic nanoparticles working at room temperature. Sci Rep 2019; 9:17607. [PMID: 31772197 PMCID: PMC6879751 DOI: 10.1038/s41598-019-53617-0] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/14/2019] [Accepted: 11/02/2019] [Indexed: 11/21/2022] Open
Abstract
Through the use of the Monte Carlo simulations utilising the mean-field approach, we show that a dense assembly of separated ultra-small magnetic nanoparticles embedded into a non-magnetic deformable matrix can be characterized by a large isothermal magnetic entropy change even upon applying a weak magnetic field with values much smaller than one Tesla. We also show that such entropy change may be very significant in the vicinity of the room temperature which effect normally requires an application of a strong external magnetic field. The deformable matrix chosen in this work as a host for magnetic nanoparticles adopts a thin film form with a large surface area to volume ratio. This in turn in combination with a strong magneto-volume coupling exhibited by this material allows us to show its suitability to be used in the case of a variety of applications utilising local cooling/heating such as future magnetic refrigerants.
Collapse
Affiliation(s)
- M R Dudek
- Institute of Physics, University of Zielona Gora, ul. Szafrana 4a, 65-069, Zielona Gora, Poland.
| | - K K Dudek
- Institute of Physics, University of Zielona Gora, ul. Szafrana 4a, 65-069, Zielona Gora, Poland
| | - W Wolak
- Institute of Physics, University of Zielona Gora, ul. Szafrana 4a, 65-069, Zielona Gora, Poland
| | - K W Wojciechowski
- Institute of Molecular Physics, Polish Academy of Sciences, M. Smoluchowskiego 17, 60-179, Poznan, Poland
| | - J N Grima
- Metamaterials Unit, Faculty of Science, University of Malta, Msida, MSD 2080, Malta
- Department of Chemistry, Faculty of Science, University of Malta, Msida, MSD 2080, Malta
| |
Collapse
|
24
|
Radially patterned polycaprolactone nanofibers as an active wound dressing agent. Arch Plast Surg 2019; 46:399-404. [PMID: 31550744 PMCID: PMC6759445 DOI: 10.5999/aps.2019.00626] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/22/2019] [Accepted: 09/04/2019] [Indexed: 12/13/2022] Open
Abstract
Background The objectives of this study were to design polycaprolactone nanofibers with a radial pattern using a modified electrospinning method and to evaluate the effect of radial nanofiber deposition on mechanical and biological properties compared to non-patterned samples. Methods Radially patterned polycaprolactone nanofibers were prepared with a modified electrospinning method and compared with randomly deposited nanofibers. The surface morphology of samples was observed under scanning electron microscopy (SEM). The tensile properties of nanofibrous mats were measured using a tabletop uniaxial testing machine. Fluorescence-stained human bone marrow stem cells were placed along the perimeter of the radially patterned and randomly deposited. Their migration toward the center was observed on days 1, 4, and 7, and quantitatively measured using ImageJ software. Results Overall, there were no statistically significant differences in mechanical properties between the two types of polycaprolactone nanofibrous mats. SEM images of the obtained samples suggested that the directionality of the nanofibers was toward the central area, regardless of where the nanofibers were located throughout the entire sample. Florescence images showed stronger fluorescence inside the circle in radially aligned nanofibers, with significant differences on days 4 and 7, indicating that migration was quicker along radially aligned nanofibers than along randomly deposited nanofibers. Conclusions In this study, we successfully used modified electrospinning to fabricate radially aligned nanofibers with similar mechanical properties to those of conventional randomly aligned nanofibers. In addition, we observed faster migration along radially aligned nanofibers than along randomly deposited nanofibers. Collectively, the radially aligned nanofibers may have the potential for tissue regeneration in combination with stem cells.
Collapse
|
25
|
Ko SW, Lee JY, Lee J, Son BC, Jang SR, Aguilar LE, Oh YM, Park CH, Kim CS. Analysis of Drug Release Behavior Utilizing the Swelling Characteristics of Cellulosic Nanofibers. Polymers (Basel) 2019; 11:polym11091376. [PMID: 31438524 PMCID: PMC6780725 DOI: 10.3390/polym11091376] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2019] [Revised: 08/03/2019] [Accepted: 08/09/2019] [Indexed: 12/02/2022] Open
Abstract
It is known that the behavior of a drug released from a supporting carrier is influenced by the surrounding environment and the carrier. In this study, we investigated the drug behavior of a swellable electrospun nanofibrous membrane. Nanofibrous mats with different swelling ratios were prepared by mixing cellulose acetate (CA) and polyurethane (PU). CA has excellent biocompatibility and is capable of high water uptake, while PU has excellent mechanical properties. Paclitaxel (PTX) was the drug of choice for observing drug release behavior, which was characterized by UV-spectroscopy. FE-SEM was used to confirm the morphology of the nanofibrous mats and to measure the average fiber diameters. We observed a noticeable increase in the total volume of the nanofibrous membrane when it was immersed in water. Also, the drug release behavior increased proportionally with increasing swelling rate of the composite nanofibrous mat. Biocompatibility testing of nanofiber materials was confirmed by CCK-8 assay and cell morphology was observed. Based on these results, we propose nanofibrous mats as promising candidates in wound dressing and other drug carrier applications.
Collapse
Affiliation(s)
- Sung Won Ko
- Department of Bionanosystem Engineering, Chonbuk National University, Jeonju 54896, Korea
| | - Ji Yeon Lee
- Department of Mechanical Design Engineering, Chonbuk National University, Jeonju 54896, Korea
| | - Joshua Lee
- Department of Bionanosystem Engineering, Chonbuk National University, Jeonju 54896, Korea
| | - Byeong Cheol Son
- Department of Bionanosystem Engineering, Chonbuk National University, Jeonju 54896, Korea
| | - Se Rim Jang
- Department of Bionanosystem Engineering, Chonbuk National University, Jeonju 54896, Korea
| | - Ludwig Erik Aguilar
- Department of Bionanosystem Engineering, Chonbuk National University, Jeonju 54896, Korea
| | - Young Min Oh
- Department of Neurosurgery, Research institute of Clinical Medicine, Chonbuk National University Medical School and Hospital, Jeonju 54896, Korea
| | - Chan Hee Park
- Department of Bionanosystem Engineering, Chonbuk National University, Jeonju 54896, Korea.
- Department of Mechanical Design Engineering, Chonbuk National University, Jeonju 54896, Korea.
| | - Cheol Sang Kim
- Department of Bionanosystem Engineering, Chonbuk National University, Jeonju 54896, Korea.
- Department of Mechanical Design Engineering, Chonbuk National University, Jeonju 54896, Korea.
| |
Collapse
|
26
|
Dobnik Dubrovski P, Novak N, Borovinšek M, Vesenjak M, Ren Z. In-Plane Behavior of Auxetic Non-Woven Fabric Based on Rotating Square Unit Geometry under Tensile Load. Polymers (Basel) 2019; 11:polym11061040. [PMID: 31212820 PMCID: PMC6630407 DOI: 10.3390/polym11061040] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2019] [Revised: 06/03/2019] [Accepted: 06/10/2019] [Indexed: 11/27/2022] Open
Abstract
This paper reports the auxetic behavior of modified conventional non-woven fabric. The auxetic behavior of fabric was achieved by forming rotating square unit geometry with a highly ordered pattern of slits by laser cutting. Two commercial needle-punched non-woven fabric used as lining and the reinforcement fabric for the footwear industry were investigated. The influence of two rotating square unit sizes was analyzed for each fabric. The original and modified fabric samples were subjected to quasi-static tensile load by using the Tinius Olsen testing machine to observe the in-plane mechanical properties and deformation behavior of tested samples. The tests were recorded with a full high-definition (HD) digital camera and the video recognition technique was applied to determine the Poisson’s ratio evolution during testing. The results show that the modified samples exhibit a much lower breaking force due to induced slits, which in turn limits the application of such modified fabric to low tensile loads. The samples with smaller rotating cell sizes exhibit the highest negative Poisson’s ratio during tensile loading through the entire longitudinal strain range until rupture. Non-woven fabric with equal distribution and orientation of fibers in both directions offer better auxetic response with a smaller out-of-plane rotation of rotating unit cells. The out-of-plane rotation of unit cells in non-homogenous samples is higher in machine direction.
Collapse
Affiliation(s)
- Polona Dobnik Dubrovski
- Institute of Engineering Materials and Design, Faculty of Mechanical Engineering, University of Maribor, Maribor 2000, Slovenia.
| | - Nejc Novak
- Mechanical Engineering Research Institute, Faculty of Mechanical Engineering, University of Maribor, Maribor 2000, Slovenia.
| | - Matej Borovinšek
- Mechanical Engineering Research Institute, Faculty of Mechanical Engineering, University of Maribor, Maribor 2000, Slovenia.
| | - Matej Vesenjak
- Mechanical Engineering Research Institute, Faculty of Mechanical Engineering, University of Maribor, Maribor 2000, Slovenia.
| | - Zoran Ren
- Mechanical Engineering Research Institute, Faculty of Mechanical Engineering, University of Maribor, Maribor 2000, Slovenia.
| |
Collapse
|
27
|
Nazeer MA, Yilgor E, Yilgor I. Electrospun polycaprolactone/silk fibroin nanofibrous bioactive scaffolds for tissue engineering applications. POLYMER 2019. [DOI: 10.1016/j.polymer.2019.02.023] [Citation(s) in RCA: 33] [Impact Index Per Article: 6.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022]
|
28
|
Jin G, He R, Sha B, Li W, Qing H, Teng R, Xu F. Electrospun three-dimensional aligned nanofibrous scaffolds for tissue engineering. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2018; 92:995-1005. [DOI: 10.1016/j.msec.2018.06.065] [Citation(s) in RCA: 56] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/18/2017] [Revised: 06/07/2018] [Accepted: 06/28/2018] [Indexed: 01/24/2023]
|
29
|
Gleadall A, Visscher D, Yang J, Thomas D, Segal J. Review of additive manufactured tissue engineering scaffolds: relationship between geometry and performance. BURNS & TRAUMA 2018; 6:19. [PMID: 29988731 PMCID: PMC6029169 DOI: 10.1186/s41038-018-0121-4] [Citation(s) in RCA: 68] [Impact Index Per Article: 11.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/29/2018] [Accepted: 05/30/2018] [Indexed: 02/07/2023]
Abstract
Material extrusion additive manufacturing has rapidly grown in use for tissue engineering research since its adoption in the year 2000. It has enabled researchers to produce scaffolds with intricate porous geometries that were not feasible with traditional manufacturing processes. Researchers can control the structural geometry through a wide range of customisable printing parameters and design choices including material, print path, temperature, and many other process parameters. Currently, the impact of these choices is not fully understood. This review focuses on how the position and orientation of extruded filaments, which sometimes referred to as the print path, lay-down pattern, or simply “scaffold design”, affect scaffold properties and biological performance. By analysing trends across multiple studies, new understanding was developed on how filament position affects mechanical properties. Biological performance was also found to be affected by filament position, but a lack of consensus between studies indicates a need for further research and understanding. In most research studies, scaffold design was dictated by capabilities of additive manufacturing software rather than free-form design of structural geometry optimised for biological requirements. There is scope for much greater application of engineering innovation to additive manufacture novel geometries. To achieve this, better understanding of biological requirements is needed to enable the effective specification of ideal scaffold geometries.
Collapse
Affiliation(s)
- Andrew Gleadall
- 1Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Loughborough, Leicestershire LE11 3TU UK
| | - Dafydd Visscher
- Department of Plastic, Reconstructive and Hand Surgery, VU University Medical Center, Amsterdam Movement Sciences, Amsterdam, The Netherlands
| | - Jing Yang
- 3Faculty of Science, School of Pharmacy, University of Nottingham, University Park, Nottingham, NG7 2RD UK
| | - Daniel Thomas
- 3Dynamic Systems, Heol Ty Gwyn Industrial Estate, Bridgend, CF34 0BQ UK
| | - Joel Segal
- 5Advanced Manufacturing Technology Research Group, Faculty of Engineering, University of Nottingham, University Park, Nottingham, NG7 2RD UK
| |
Collapse
|