Silver nanoparticle-decorated on tannic acid-modified magnetite nanoparticles (Fe3O4@TA/Ag) for highly active catalytic reduction of 4-nitrophenol, Rhodamine B and Methylene blue

Palladium nanoparticles anchored on NiO particles-modified micro-size chitosan spheres: A promising, active, and retrievable catalyst system for treatment of environmental pollutants

Efficient treatment of toxic organic pollutants in water/wastewater by using innovative, cost efficient, and simple technologies has recently become an important issue worldwide. Remediation of these pollutants with chemical reduction in the presence of a nano-sized catalyst and a reducing agent is one of the most useful methodologies. In the present study, we have designed a promising heterogeneous catalyst system (Pd@CS-NiO) by easy and efficient stabilization of palladium nanoparticles on the surface of microspheres composed of chitosan (CS)-NiO particles (CS-NiO) for the reduction of organic pollutants. The nano-structure of the developed Pd@CS-NiO was successfully validated using FE-SEM, XRD, EDS, TEM, and FTIR/ATR and its particles size was determined as 10 nm. The catalytic power of Pd@CS-NiO was then assessed in the reduction of 4-nitro-o-phenylenediamine (4-NPDA), 4-nitrophenol (4-NP), 4-nitroaniline (4-NA), 2-nitroaniline (2-NA), and some organic dyes, namely methylene blue (MB), methyl orange (MO), and rhodamine B (RhB) in aqueous medium at room temperature. The reductions were thoroughly studied spectro-photometrically. The tests displayed that the synthesized Pd@CS-NiO was a highly active and useful catalyst that reduced these pollutants in 0-145 s. Moreover, the rate constants for 2-NA, 4-NP, 4-NA, 4-NPDA, MO, and RhB were found to be 0.017 s-1, 0.011 s-1, 0.006 s-1, 0.013 s-1, 0.023 s-1, and 0.03 s-1, respectively. Moreover, the recycling test indicated that Pd@CS-NiO may be recovered easily thanks to its micro size nature and could be used up to seven steps, confirming its practical application potential.

Deciphering the catalytic activity of nickel anchored on Fe3O4@SiO2@3-CPMS@L as a magnetically recoverable nanocatalyst for the efficacious reduction of 4-nitrophenol, nitrobenzene, and methyl orange

In this paper, a versatile heterogeneous nanocatalyst was fabricated employing a self-assembly technique. To commence, Fe3O4 MNPs were coated with a thin layer of SiO2 using the stobbers method. Subsequently, the surface was further functionalized with 3-CPMS, followed by a reaction with a Schiff base. Finally, nickel NPs were deposited on the surface through in situ deposition, forming the Fe3O4@SiO2@3-CPMS@L-Ni magnetic nanocatalyst. The architecture of this magnetic nanocatalyst was meticulously characterized through an array of sophisticated techniques: XRD, FT-IR, SEM, TEM, BET and VSM. The XRD diffraction pattern confirmed the presence of Fe3O4 MNPs, SiO2, and Ni peaks, providing evidence for successful synthesis. Moreover, the successful functionalization with a Schiff base was demonstrated by the presence of an azomethane peak in the FTIR spectra of the synthesized nanocatalyst. The fabricated nanocatalyst was adeptly utilized for the reduction of 4-NP, NB, and MO demonstrating a remarkably elevated rate of catalytic efficacy. Moreover, this catalyst was effortlessly retrievable through the application of an external magnet, and it maintained its catalytic prowess across at least six consecutive cycles. The utilization of water as an environmentally friendly solvent, coupled with the utilization of abundant and cost-effective nickel catalyst instead of the costly Pd or Pt catalysts, along with the successful recovery and scalability of the catalyst, render this method highly advantageous from both environmental and economic perspectives for the reduction of 4-NP, NB, and MO.

Laser-Assisted Preparation of TiO2/Carbon/Ag Nanocomposite for Degradation of Organic Pollutants

The ever-increasing expansion of chemical industries produces a variety of common pollutants, including colors, which become a global and environmental problem. Using a nanocatalyst is one of the effective ways to reduce these organic contaminants. With this in mind, a straightforward and effective method for the production of a novel nanocatalyst based on lignin-derived carbon, titanium dioxide nanoparticles, and Ag particles (TiO2/C/Ag) is described. The preparation of carbon and Ag particles (in sub-micro and nano size) was carried out by laser ablation in air. The nanocomposite was synthesized using a facile magnetic stirrer of TiO2, C, and Ag. According to characterization methods, a carbon nanostructure was successfully synthesized through the laser irradiation of lignin. According to scanning electron microscope images, spherical Ag particles were agglomerated over the nanocomposite. The catalytic activities of the TiO2/C/Ag nanocomposite were tested for the decolorization of methylene blue (MB) and Congo red (CR), employing NaBH4 in a water-based solution at 25 °C. After adding fresh NaBH4 to the mixture of nanocomposite and dyes, both UV absorption peaks of MB and CR completely disappeared after 10 s and 4 min, respectively. The catalytic activity of the TiO2/C/Ag nanocomposite was also examined for the reduction of 4-nitrophenol (4-NP) using a NaBH4 reducing agent, suggesting the complete reduction of 4-NP to 4-aminophenol (4-AP) after 2.30 min. This shows excellent catalytic behavior of the prepared nanocomposite in the reduction of organic pollutants.

Tannic Acid-Decorated Bimetallic Copper-Gold Nanoparticles with High Catalytic Activity for the Degradation of 4-Nitrophenol and Rhodamine B

In this study, tannic acid (TA) was applied as a stabilizing agent for synthesizing bimetallic copper-gold (CuAu) nanoparticles. Cu(NO3)2 and NaAuCl4 were used as the sources of copper and gold ions, respectively, and NaBH4 was employed as a reducing agent. The prepared TA-CuAu nanoparticles were extensively characterized via ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray diffraction, and zeta potential analyses. To evaluate their catalytic activity, the TA-CuAu nanoparticles and NaBH4 were applied in the degradation of 4-nitrophenol (4-NP) and rhodamine B (RB) individually and in a mixture. The individual degradation of 4-NP and RB was completed within 10 min, and the apparent rate constants were calculated as 0.3046 and 0.2628 min-1, respectively, emphasizing the efficient catalytic activity of the TA-CuAu nanoparticles. Additionally, controlled experiments were performed for the degradation of 4-NP and RB in the absence of catalysts or NaBH4 to investigate the kinetic feasibility of the catalytic reactions. A mixture of 4-NP and RB was successfully degraded within 10 min using the TA-CuAu nanoparticles as catalysts. Furthermore, the reuse of the catalysts after five successive cycles demonstrates an outstanding performance with no significant loss in the catalytic activity. Finally, the successful treatment of the tap and lake water samples spiked with 4-NP and RB using the TA-CuAu nanoparticles further confirmed their application potential as catalysts in environmental water remediation.

Supported of gold nanoparticles on carboxymethyl lignin modified magnetic nanoparticles as an efficient catalyst for reduction of nitroarenes and treatment of human melanoma

This article represents the synthesis and characterizations of Au NPs immobilized and carboxymethyl lignin (CML) modified Fe3O4 nanoparticles (Fe3O4@CML/Au NPs) following a bio-inspired protocol without the participation of any toxic and harmful reductant or stabilizers. Following various physicochemical methodologies, such as FT-IR, FE-SEM, TEM, EDX, XRD, VSM, and ICP-OES, the textural characteristics and different structural aspects were evaluated. The Fe3O4@CML/Au NPs nanocomposite was subsequently explored towards the catalytic reduction of diverse aromatic nitro functions using green conditions. An excellent yield were achieved within very short reaction time. Nine recycling runs of the nanocatalyst were completed without a discernible loss of catalytic activity, thanks to its easy magnetic recovery. The DPPH assay was carried out to examine the antioxidant effectiveness. The Fe3O4@CML/Au NPs nanocomposite inhibited half of the DPPH in a 250 μg/mL solution. To measure the anti-human melanoma efficacy of Fe3O4@CML/Au NPs nanocomposite, MTT assay was applied on HT144, MUM2C, IPC-298 and SKMEL24 cell lines. Fe3O4@CML/Au NPs nanocomposite had high anti-human melanoma efficacy on above tumor cells. The best finding of anti-human melanoma properties of Fe3O4@CML/Au NPs nanocomposite was seen in the case of the SKMEL24 cell line. The IC50 of Fe3O4@CML/Au NPs nanocomposite was 137, 145, 185, and 125 μg/mL against HT144, MUM2C, IPC-298 and SKMEL24 cells, respectively. This research exhibited remarkable anti-human melanoma and antioxidant efficacies of Fe3O4@CML/Au NPs nanocomposite in the in vitro condition.

Fabrication of silver nanoparticles decorated on sodium alginate microbeads enriched with keratin and investigation of its catalytic and antioxidant activity

In this study, an environmentally friendly, effective, easily synthesizable and recoverable nano-sized catalyst system (Ag@NaAlg-keratin) was designed by decorating Ag nanoparticles on microbeads containing sodium alginate (NaAlg) and keratin obtained from goose feathers. The structure, morphology and crystallinity of the Ag@NaAlg-keratin nanocatalyst were evaluated by XRD, FT-IR, FE-SEM, EDS/EDS mapping and TEM analyses. Catalytic ability of designed Ag@NaAlg-keratin nanocatalyst was then investigated against 4-nitrophenol (4-NP) and methyl orange (MO) reductions. Ag@NaAlg-keratin nanocatalyst effectively reduced 4-NP in 6 min and MO in 5 min, with rate constants of 0.17 min-1 and 0.16 min-1, respectively. Additionally, activation energies (Ea) were found as 39.8 kJ/mol for 4-NP and 37.9 kJ/mol for MO. Performed recyclability tests showed that the Ag@NaAlg-keratin nanocatalyst was easily recovered due to its microbead form and successfully reused five times, maintaining both its activity and structure. Furthermore, antioxidant activity of Ag@NaAlg-keratin nanocatalyst was the highest (73.16 %).

Tannic-acid-mediated synthesis and characterization of magnetite-gold nanoplatforms for photothermal therapy

Aim: The design of new hybrid nanoplatforms (HNPs) through the innovative and eco-friendly use of tannic acid (TA) for the synthesis and stabilization of the nanoplatforms. Materials & methods: The size, morphology, composition and magnetic and plasmonic properties of HNPs were investigated together with their ability to generate heat under laser irradiation and the hemotoxicity to explore their potential use for biomedical applications. Results & conclusion: The use of TA allowed the synthesis of the HNPs by adopting a simple and green method. The HNPs preserved the peculiar properties of both magnetic and plasmonic nanoparticles and did not show any hemotoxic effect.

Visible Laser Light Mediated Cancer Therapy via Photothermal Effect of Tannin-Stabilized Magnetic Iron Oxide Nanoparticles

Super-paramagnetic iron oxide nanoparticles (SPIONs/Fe₃O₄) were synthesized in aqueous medium under a nitrogen atmosphere. These particles were made water-dispersible by cladding them with tannic acid (TA). The synthesized nanoparticles were characterized for their size and surface charge using HRTEM and zetasizer. It was found that the size of the particles formed was around 15 nm with almost spherical morphology and negative surface charge. Vibrating sample magnetometer (VSM) data attributed a super-paramagnetic nature to these nanoparticles. The photo-thermal dynamics of these magnetite (Fe₃O₄) nanoparticles was characterized by exciting their dispersions with laser radiation in the visible region (635 nm). Remarkably, 17 min of laser irradiation of the dispersion raised its temperature by ~25 °C (25 to 49.8 °C), whereas for the solvent, it was limited to not more than 4 °C (after 60 min). Thus, the Fe₃O₄ nanoparticles generated localized hyperthermia for potential use in cancer therapy of tumor management. The photo-thermal dynamics of these nanoparticles was investigated in-vitro for cancer therapy, and it was clearly shown that cancer cell growth was inhibited, and considerable cellular damage occurred when cells were incubated with laser-activated magnetic nanoparticles. No noticeable innate toxicity of the nanoparticles was observed on cancer cell lines. The effectiveness of these nanoparticles was studied on several malignant cell lines, and an acceptable Fe₃O₄ concentration range was subsequently determined for generating substantial cell death by hyperthermia, but not inherent toxicity. Therefore, we concluded that this nano-system is effective and less time consuming for the treatment of malignant diseases such as cancer.

Sustainable magnetically recoverable Iridium-coated Fe3O4 nanoparticles for enhanced catalytic reduction of organic pollutants in water

The reduction of nitroarenes to aromatic amines is one of the potential pathways to remediate the hazardous impact of toxic nitroarenes on the aquatic environment. Aromatic amines obtained from the reduction of nitroaromatics are not only less toxic than nitroaromatics but also act as important intermediates in the synthesis of dyes, drugs, pigments, herbicides, and polymers. There is a huge demand for the development of cost-effective, and eco-friendly catalysts for the efficient reduction of nitroarenes. In the present study, Fe₃O₄@trp@Ir nanoparticles were explored as efficient catalysts for the reduction of nitroarenes. Fe₃O₄@trp@Ir magnetic nanoparticles were fabricated by surface coating of Fe₃O₄ with tryptophan and iridium by co-precipitation method. As-prepared Fe₃O₄@trp@Ir nanoparticles are environmentally benign efficient catalysts for reducing organic pollutants such as 4-nitrophenol (4-NP), 4-nitroaniline (4-NA), and 1-bromo-4-nitrobenzene (1-B-4-NB). The key parameters that affect the catalytic activity like temperature, catalyst loading, and the concentration of reducing agent NaBH₄ were optimized. The obtained results proved that Fe₃O₄@trp@Ir is an efficient catalyst for reducing nitroaromatics at ambient temperature with a minimal catalyst loading of 0.0025%. The complete conversion of 4-nitrophenol to 4-aminophenol took only 20 s with a minimal catalyst loading of 0.0025% and a rate constant of 0.0522 s^-1. The high catalytic activity factor (1.040 s^-1 mg^-1) and high turnover frequency (9 min^-1) obtained for Fe₃O₄@trp@Ir nanocatalyst highlight the possible synergistic effect of the two metals (Fe and Ir). The visible-light photocatalytic degradation of 4-NP was also investigated in the presence of Fe₃O₄@trp@Ir. The photocatalytic degradation of 4-NP by Fe₃O₄@trp@Ir is completed in 20 min with 95.15% efficiency, and the rate of photodegradation of 4-NP (0.1507 min^-1) is about twice the degradation rate of 4-NP in the dark (0.0755 min^-1). The catalyst was recycled and reused for five cycles without significant reduction in the conversion efficiency of the catalyst.

Barium hexaferrite nanoplatelets with polyphenol coatings for versatile applications as a stable, magnetic, and antimicrobial colloid

Colloidal stabilization of magnetic nanoparticles is one of the most important steps in the preparation of magnetic nanoparticles for potential biomedical applications. A special kind of magnetic nanoparticle are barium hexaferrite nanoplatelets (BSHF NPLs) with a hexagonal shape and a permanent magnetic moment. One strategy for the stabilization of BHF in aqueous media is to use coatings. In our research, we used an eco-friendly tannic acid, as a coating on BSHF NPLs. As-prepared BSHF NPLs coated with tannic acid were examined with transmission electron microscopy, infrared and UV-Vis spectroscopy, electro-kinetic measurements, and their room-temperature magnetic properties were measured. Stable colloids were tested in two biological complex media and antimicrobial properties of the material were examined. To enhance the antimicrobial properties of our material, we used tannic acid as a platform for the in-situ production of silver on BSHF NPLs. New hybrid material with silver also possesses magnetic properties and excellent antimicrobial activity against Escherichia coli and Staphylococcus aureus.

Magnetic alginate-carboxymethyl cellulose to immobilize copper nanoparticles as a green and sustainable catalyst for 4-nitrophenol reduction

In the present work, sustainable green catalysts with high activity, and excellent stability were prepared and thoroughly characterized by XRD, FT-IR, BET, VSM, SEM, EDX, HR-TEM, and TGA techniques. The combined sodium alginate (SA) and carboxymethyl cellulose (CMC) biopolymers were functionalized with Fe₃O₄ nanoparticles to immobilize copper nanoparticles to form Fe₃O₄@SA-CMC-CuNP nanocomposites in batch experiments. Furthermore, the Fe₃O₄@SA-CMC-CuNP nanocomposites were utilized as the heterogeneous catalyst for 4-nitrophenol (4-NP) reduction to 4-aminophenol (4-AP) in the presence of NaBH₄, and the progress of the catalytic reaction was monitored using UV-visible spectrophotometry. The Fe₃O₄@SA-CMC-CuNP nanocomposite exhibited much higher catalytic activity for the 4-nitrophenol reduction reaction than individual components Fe₃O₄ and Fe₃O₄@SA-CMC. The effect of parameters such as the amount of catalyst was evaluated and 30 mg of the catalyst amount with a 95.0% reduction of 4-nitrophenol for 1.5 min was obtained. The effect of reaction temperature was also investigated to find out the activation energy. The analyses of kinetics and thermodynamics were carried out to understand the catalytic behavior. Furthermore, the catalyst can be separated from the reaction system through the usage of a magnet and recycled up to five times without any loss of activity. Therefore, the development of sustainable green catalyst biopolymer-based nanocomposites is promising for new catalysts in the future for treating organic wastewater.

High-efficiency degradation catalytic performance of a novel Angelica sinensis polysaccharide-silver nanomaterial for dyes by ultrasonic cavitation

Currently, the polluted wastewater discharged by industry accounts for the major part of polluted bodies of water. As one of the industrial wastewaters, dye wastewater is characterized by high toxicity, wide pollution, and difficulty in decolorization degradation. In this paper, a novel composite nanomaterial catalyst of silver was prepared by using Angelica sinensis polysaccharide (ASP) as a reducing and stabilizing agent. And the optimum reaction conditions explored are V_AgNO3 = 5 mL (300 mM) and v_ASP = 7% (w/v) for 6 h at 90 °C. In addition, the ASP-Ag nanocatalyst was characterized by several techniques. The results demonstrated that ASP-Ag nanoparticles were successfully synthesized. Degradation rate, which provides a numerical visualization of the percentage reduction in pollutant concentration. With the wrapping of ASP, the ultrasonic catalytic degradation rates of different organic dyes including rhodamine B (RB), methylene blue (MB), and methyl orange (MO) were from 88.2%, 88.7%, and 85.2% to 96.1%, 95.2% and 93.5% at room temperature, respectively. After the experiments, when c_dyes = 10 mg/L, the highest degradation rate can be observed under c_APS-AgNPs = 10 mg/L with the most powerful cavitation frequency f = 59 kHz. The effect of ultrasonic frequency on the acoustic pressure distribution in the reactor was investigated by using COMSOL Multiphysis^@ software to propose the mechanism of ultrasonic degradation and the mechanism was confirmed by OH radical trapping experiments. It indicates that OH produced by the ultrasonic cavitation effect plays a determinant role in the degradation. And then, the intermediate products of the dye degradation process were analyzed by gas chromatography and mass spectrometry (GC-MS), and the possible degradation processes of dyes were proposed. The resulting products of degradation are SO₄^2-, NH₄⁺, NO₃^-, N₂, CO₂ and H₂O. Finally, the recycling degradation experiments showed that catalyst maintains a high degradation rate within reusing 5 cycles. Thus, this catalyst is highly efficient and recyclable.

Ni-Pd-Incorporated Fe3O4 Yolk-Shelled Nanospheres as Efficient Magnetically Recyclable Catalysts for Reduction of N-Containing Unsaturated Compounds

The use of metal-based heterogeneous catalysts for the degradation of N-containing organic dyes has attracted much attention due to their excellent treatment efficiency and capability. Here, we report the synthesis of heterometals (Ni and Pd)-incorporated Fe3O4 (Ni-Pd/Fe3O4) yolk-shelled nanospheres for the catalytic reduction of N-containing organic dyes using a facile combination of solvothermal treatment and high-temperature annealing steps. Benefiting from the magnetic properties and the yolk-shelled structure of the Fe3O4 support, as well as the uniformly dispersed active heterometals incorporated in the shell and yolk of spherical Fe3O4 nanoparticles, the as-prepared Ni-Pd/Fe3O4 composite shows excellent recyclability and enhanced catalytic activity for three N-containing organic dyes (e.g., 4-nitrophenol, Congo red, and methyl orange) compared with its mono metal counterparts (e.g., Ni/Fe3O4 and Pd/Fe3O4). In the 4-nitrophenol reduction reaction, the catalytic activity of Ni-Pd/Fe3O4 was superior to many Fe3O4-supported nanocatalysts reported within the last five years. This work provides an effective strategy to boost the activity of iron oxide-based catalytic materials via dual or even multiple heterometallic incorporation strategy and sheds new light on environmental catalysis.

Biogenic synthesis of reduced graphene oxide decorated with silver nanoparticles (rGO/Ag NPs) using table olive (olea europaea) for efficient and rapid catalytic reduction of organic pollutants

In this work, graphene oxide (GO) sheets were prepared via a facile electrochemical exfoliation of graphite in acidic medium and subsequent oxidation with potassium permanganate. The GO sheets were employed for preparation of reduced GO adorned with nanosized silver (rGO/Ag NPs) using green reduction of GO and Ag(I) via olive fruit extract as a reducing and immobilizing agent. The crystal phase, morphology, and nanostructure of the prepared catalyst were characterized by XRD, SEM, EDX, UV-Vis and Raman spectroscopy techniques. The as-prepared rGO/Ag NPs showed superior catalytic performance towards the complete reduction (up to 99%) of 4-nitrophenol (4-NPH) to 4-aminophenol (4-APH) and rhodamine B (RhB) to Leuco RhB within 180 s using NaBH₄ at ambient condition. The rate constant (k) values were found to be 0.021 and 0.022 s^-1 for 4-NPH and RhB reduction, respectively. In addition, the regenerated catalyst could be reused after seven cycles without losing any apparent catalytic efficiency. Accounting for the excellent catalytic capability, chemical stability and environment-friendly synthesis protocol, the rGO/Ag NPs has great potential working as a heterogeneous catalyst in the transforming harmful organic contaminants into less harmful or harmless compounds.

Decorated Au NPs on lignin coated magnetic nanoparticles: Investigation of its catalytic application in the reduction of aromatic nitro compounds and its performance against human lung cancer

In the recent years, bio-functionalized noble metal doped advanced magnetics nanocomposite materials has been materialized as potential featured catalysts in diverse applications. In this connection, we report herein a novel biogenic lignin driven Au nanoparticle supported Fe₃O₄ composite material. The procedure is free from any harsh reducing or stabilizing agent. Morphology and structural features were assessed following different physicochemical methodologies like FT-IR, FE-SEM, TEM, EDS, XRD, VSM and ICP-OES techniques. Thereafter, the [Fe₃O₄/Lignin/Au] material was successfully employed in the efficient reduction of different nitroarenes in aqueous medium. The process was monitored over UV-Vis spectroscopic study. Excellent yields were achieved with a range of diverse functionalized nitroarenes within 10-45 min of reaction. The nanocatalyst was recycled 10 times without any significant loss of catalytic activity. Distinctiveness of the material's activity was validated by comparing the results in the reduction of 4-nitrophenol. Furthermore, the prepared [Fe₃O₄/Lignin/Au] nanocomposite system exhibited outstanding antioxidant and anticancer effects against five lung cancer cell lines, such as, BICR 3, BICR 78, CALU 1, ChaGo-K-1, and A549. Cytotoxicity assay was determined in terms of % cell viability following MTT protocol. The corresponding IC₅₀ values were obtained as 47, 31, 19, 25, and 31 μg/mL respectively.

Characterization of Fe3O4 Nanoparticles for Applications in Catalytic Activity in the Adsorption/Degradation of Methylene Blue and Esterification

The aim of this study is to evaluate the applicability of the catalytic activity (CA) of the Fe₃O₄ magnetic system in the adsorption/degradation of methylene blue and esterification. The thermal decomposition method allowed the preparation of Fe₃O₄ nanoparticles. The crystallites of the Fe₃O₄ structural phase present an acicular form confirmed by X-ray diffraction. Transmission electron microscopy results identified the acicular shape and agglomeration of the nanoparticles. Mössbauer spectroscopy showed that the spectrum is composed of five components at room temperature, a hyperfine magnetic field distribution (HMFD), two sextets, a doublet, and a singlet. The presence of the HMFD means that a particle size distribution is present. Fluorescence spectroscopy studied the CA of the nanoparticles with methylene blue and found adsorption/degradation properties of the dye. The catalytic activity of the nanoparticles was evaluated in the esterification reaction by comparing the results in the presence and absence of catalyst for the reaction with isobutanol and octanol, where it is observed that the selectivity for the products MIBP and MNOP is favored in the first three hours of reaction.

Preparation of tannic acid and L-cysteine functionalized magnetic composites for synergistic enrichment of N-glycopeptides followed by mass spectrometric analysis

Glycoprotein is involved in a variety of biological activities and has been linked to a number of diseases. Glycopeptide enrichment prior to mass spectrometry (MS) detection is crucial to reduce interference, improve detection efficiency, and analyze proteomics deeply and comprehensively. Here, we prepared a novel magnetic hydrophilic material combining tannic acid (TA) and L-cysteine (L-Cys) through a simple and fast procedure. Owing to the synergistic hydrophilic interaction of TA and L-Cys, the obtained adsorbent material shows excellent enrichment performance toward N-glycopeptides with low detection limit, high selectivity, and good reusability. Besides, the material can also be utilized for the enrichment of N-glycopeptides in human serum and saliva, which shows its application prospect in complex biological samples.

Silver nanoparticle-deposited whey protein isolate amyloid fibrils as catalysts for the reduction of methylene blue

The unique structural characteristics and superior biocompatibility make the protein nanofibers promising immobilization platforms/substrates for catalysts/enzymes. Metal nanoparticles have been employed as the catalysts in industries due to their excellent catalytic activity and stability, whereas their high surface energy leads to nanoparticle aggregation, thereby hampering their catalytic performance. Here, amyloid fibril (AF) derived from whey protein isolate (WPI) was chosen as the support of silver nanoparticles (AgNP) and utilized for the catalytic reduction of methylene blue (MB). The one-dimensional amyloid-based hybrid materials (AgNP/WPI-AF) were first synthesized via chemical or photochemical route. The characterization of AgNP/WPI-AF by UV-vis spectrophotometry and electron microscopy revealed that the sizes of AgNP on WPI-AF's surface ranged from 2 to 30 nm. Next, the catalytic performances of AgNP/WPI-AF prepared by various routes for MB degradation were investigated. Additionally, the kinetic data were analyzed using two different models and the apparent rate constants and thermodynamic parameters were further determined accordingly. Moreover, the reusability of AgNP/WPI-AF was assessed by monitoring the percentage removal of MB over consecutive filtering cycles. Our results indicated that Langmuir-Hinshelwood-type mechanism better described the catalytic MB reduction using AgNP/WPI-AF. This work provides a nice example of application of nanoparticle-amyloid fibril composite materials for catalysis.

Enhanced reduction of nitrobenzene derivatives using reusable Ni nanoparticles supported on multi-layered poly(1,2-phenylenediamine)-coated layered double hydroxides

Recently, nanomaterials with layered double hydroxide (LDH) cores have been the subject of intense research regarding their promising applications in organic synthesis. In this study, nitrobenzene reduction is investigated by designing and synthesizing a novel LDH-based heterogeneous catalyst containing a nickel-1,2-phenylenediamine complex. The Cu–Zn–Al LDH was functionalized with copolymer bearing a glycidyl methacrylate (GMA) linkage that makes it suitable for grafting with 1,2-phenylenediamine. Overall, the synthesized LDH@MPS-GMA-PDA-Ni was found to be a highly efficient heterogeneous nanocatalyst that can catalyze nitroarene reduction with high yields under mild conditions.

Ag NPs supported chitosan-agarose modified Fe3O4 nanocomposite catalyzed synthesis of indazolo[2,1-b]phthalazines and anticancer studies against liver and lung cancer cells

In this article we report a novel Ag NPs fabricated chitosan-agarose composite functionalized core-shell type Fe₃O₄ nanoparticle (Ag/CS-Agar@Fe₃O₄). The biogenic material was analyzed over a number of physicochemical methods like, FT-IR, FE-SEM, TEM, EDX, XRD, VSM and ICP-OES. In catalytic exploration we aimed the synthesis of diverse 2H-indazolo0-b]phthalazine-trione derivatives via one-pot three component coupling of phathalalhydrazide, dimedone and different aldehydes. It afforded good to excellent yields under solvent-less conditions. Robustness of the catalyst was justified by catalyst recyclability for consecutive 10 times, hot filtration and leaching tests. Again, biological activity of the material was evaluated by studying the antioxidant and cytotoxicity properties over lung and liver cancer cell lines. Antioxidant potential of Ag/CS-Agar@Fe₃O₄ was assessed by DPPH radical scavenging studies and the corresponding IC50 was found to be 96.57 μg/mL. Liver and lung cancer studies over Ag/CS-Agar@Fe₃O₄ was carried out by MTT assay against HepG2 and A549 cell lines. The corresponding IC50 values were found as 192.35 and 365.28 μg/mL respectively. % Cell viability of the nanomaterial decreased dose dependently over both the cell lines without any cytotoxicity on normal cell line. The results demonstrates Ag/CS-Agar@Fe₃O₄ nanocomposite to be an efficient chemotherapeutic drug against the lung and hepatocellular carcinoma cells.

A convenient green protocol for oxidative esterification of arylaldehydes over Pd NPs decorated polyplex encapsulated Fe3O4 microspheres

A mild, competent and eco-friendly protocol has been developed for oxidative esterification of various aldehydes over a post-synthetically modified and Pd fabricated chitosan-starch dual functionalized Fe3O4 microspheres as a magnetically isolable heterogeneous and biocompatible nanocatalyst. Molecular O2 was used as an oxidant in the reaction. A series of aldehydes was directly esterified with MeOH in excellent yields without any pre-activation and involvement of harsh chemicals/conditions. Structural features of the catalyst were assessed through FT-IR, FE-SEM, TEM, EDX, molecular mapping, XRD, VSM and ICP-OES techniques. Due to magnetic core, the catalyst was easily isolated using an external magnet and reused for 8 times in succession, retaining its morphology and catalytic activity.

Rapid assembly of colorless antimicrobial and anti-odor coatings from polyphenols and silver

The development of antimicrobial fabrics and textiles that can sustainably inhibit a broad spectrum of microbes is crucial for protecting against pathogens in various environments. However, engineering antimicrobial textiles is challenging due to issues with discoloration and inhibited breathability, the use of harmful or harsh reagents and synthesis conditions, and complex and/or time-consuming processing. Herein, we develop a facile and rapid approach to deposit antimicrobial coatings using universally adherent plant polyphenols and antimicrobial silver ions. Importantly, the coatings are colorless, thin (< 10 nm), rapidly assembled (< 20 min), and can be deposited via immersion or spraying. We demonstrate that these metal-phenolic coatings on textiles can inhibit lipid-enveloped viruses over one thousand times more efficiently than coatings composed of other metal ions, while maintaining their efficacy even after 5 washes. Moreover, the coatings also inhibit Gram positive and negative bacteria, and fungi, and can prevent odors on clothes for at least 10 washes. Collectively, the ease of synthesis, use of simple and safe precursors, and amenability to at-home and industrial application suggests that the coatings will find practical application in various settings.

Simultaneous adsorption for cationic and anionic dyes using chitosan/electrospun sodium alginate nanofiber composite sponges

The coexistence of anionic and cationic dyes in dye wastewater has highlighted a great necessity to develop amphoteric adsorbents for their simultaneous removal. Herein, an amphoteric composite sponge was successfully fabricated by combining chitosan with electrospun sodium alginate nanofiber using lyophilization in acetic acid/water/dioxane mixed solvents, which owned the abundant functional groups and superior microstructure of interconnected pores and nanoscale fibers, beneficial for the adsorption capacity improvement. The optimum adsorption capacities for Acid Blue-113 and Rhodamine B were 926.2 ± 25.7 mg/g and 695.4 ± 17.0 mg/g, respectively, much higher than that of the controlled sample prepared with chitosan and non-spinning sodium alginate in traditional acetic acid/water solvents. Meanwhile, the sponge provided with the superior adsorption performance under various pH environment and cyclic adsorption. Importantly, it had considerable simultaneous adsorption capacity for binary system containing anionic and cationic dyes. Overall, the chitosan/electrospun sodium alginate nanofiber composite sponge shows potential for complex wastewater treatment.

Polyoxometalates for bifunctional applications: Catalytic dye degradation and anticancer activity

Improving the efficiencies of organic compound degradations by catalytic materials is a challenging materials research field. In our research, we successfully synthesized cobalt-based polyoxometalates (CoV-POMs) via a simple crystallization-driven self-assembly method. The incorporation of the newly synthesized CoV-POMs into peroxymonosulphate (PMS), forming a mixture, greatly enhancing the catalytic activation for a complete degradation of dye solution. The positive synergic effect between CoV-POMs and PMS was substantiated by a relatively meager degradation of less than 10% in the system without CoV-POMs, in which CoV-POMs played a vital role to activate PMS towards free radicals generation for dye degradation. Methylene blue (MB) and rhodamine B (RB) dyes were completely decolorized under 60 min with the presence of 40 mg/L CoV-POMs and 150 mg/L PMS. The CoV-POMs/PMS system was pH dependance with a lower dye degradation efficiency at elevated pH. The effect of pH was more prominent in RB dye, in which the degradation efficiency dropped drastically from 93.3% to 41.12% with the increase in the solution pH from 7 to 11. The quenching tests suggested that sulfate radicals were the dominant active species involving in the dye degradation reaction. Besides MB and RB dyes, CoV-POMs/PMS system also showed significant activity towards the degradation of phenol red (PR) and methyl orange (MO) dyes. In the biological test, CoV-POMs exhibited non-toxic behavior towards normal cells that reduced safety concern for the large-scale wastewater treatment application. In addition, the testing divulged the anticancer property of CoV-POMs with more than 35 % of A549 lung adenocarcinoma and MDA-MB-231 breast adenocarcinoma were killed with 250 mg/L CoV-POMs. The selective lethality of CoV-POMs towards cancer cells was found to be caused by different extents of cellular apoptosis. In overall, the synthesized bifunctional CoV-POMs manifested superior activities in the examined applications, specifically dye degradation and anticancer.

Synthesis of green magnetic biopolymer derived from Oak fruit hull tannin for efficient simultaneous adsorption of a mixture of Malachite Green and Sunset Yellow dyes from aqueous solutions

In the present study, a new bioadsorbent with polyhydroxyphenyl groups was synthesized as a tannin-based magnetic porous organic polymer by using from internal layer of Oak fruit hull (Oak Gal)...

Chitosan-starch biopolymer modified kaolin supported Pd nanoparticles for the oxidative esterification of aryl aldehydes

A mild and efficient green protocol has been disclosed for selective oxidative esterification of various aldehydes over a novel Pd fabricated chitosan-starch polyplex encapsulated Kaolin (Kaolin@CS-starch-Pd) as a heterogeneous and reusable biocompatible nanocatalyst. Molecular oxygen was used as an oxidizing agent to generate water as the sole by-product. A wide variety of aldehydes was converted to their methyl esters in high yields. The process involved gentle reaction conditions to avoid any type of pre-activation. Structural features of the catalyst were determined through FT-IR, FE-SEM, TEM, EDX, elemental mapping, XRD and ICP-OES analyses. The material was found to be stable enough toward Pd leaching. Durability of Kaolin@CS-starch-Pd was further justified by retaining its catalytic activity through successful reusability for several times.

Metal-organic framework modified by silver nanoparticles for SERS-based determination of sildenafil and pioglitazone hydrochloride

A versatile surface-enhanced Raman scattering (SERS) assay has been established that can realize rapid and sensitive determination of sildenafil (SIL) and pioglitazone hydrochloride (PIO) adulteration in healthcare products. Metal-organic frameworks-silver nanoparticles (MOFs-AgNPs) with SERS activity were successfully prepared via in situ synthesis AgNPs on the MOFs surface. By virtue of the adsorptivity of MOFs, the MOFs-AgNPs could effectively concentrate the drug molecules on the electromagnetic enhancement areas of AgNPs. Moreover, the MOFs-AgNPs substrate exhibited more sensitive SERS activity than classical AgNPs with linear range of 1.0 × 10-7-1.0 × 10-5 mol L-1 for SIL and 8.0 × 10-7-3.0 × 10-5 mol L-1 for PIO and limit of detection (LOD) of 4.8 × 10-8 mol L-1 for SIL and 1.4 × 10-7 mol L-1 for PIO. The designed method realized the determination of SIL and PIO in commercial tablets and healthcare products with recoveries of 93.8-108.0% and 93.0-104.0%, respectively, with relative standard deviation (RSD) of 2.7-4.1% and 2.2-4.2%, respectively. The present system displayed little interference effect on determination. This work provides a multifunctional route for the determination of other drugs via the SERS technology.

Preparation of Magnetically Recoverable MPCTP-Ag Composite Nanoparticles and Their Application as High-Performance Catalysts

In the present research, magnetically recyclable polyphosphazene (PCTP)/Ag (MPCTP-Ag) nanoparticles are prepared by a green path, in which PCTP was used to modify Fe₃O₄ nanoparticles and provide nucleation sites for the reduction of Ag nanoparticles. The prepared MPCTP-Ag nanoparticles were characterized by TEM, SEM, EDS, BET, XRD, vibrating sample magnometry, XPS, and TGA analysis. The catalytic performances of the MPCTP-Ag nanoparticles for the degradation of 4-nitrophenol (4-NP), methylene blue (MB), methyl orange (MO), and their mixtures in the presence of NaBH₄ were studied. The main factors affecting the catalytic performance, including temperature, reactant concentration, and catalyst dosage, were investigated. The results showed that the MPCTP-Ag nanoparticles exhibited excellent catalytic activity for the degradation of all three targeted organic contaminants (4-NP, MB, and MO). Moreover, the product retains its catalytic activity after being reused five times by magnetic separation. The results showed that MPCTP-Ag composite nanoparticles were efficient recyclable magnetic nanocatalysts with promising application in environment protection.