Photodegradation of biodegradable polyesters: A comprehensive study on poly(l-lactide) and poly(ɛ-caprolactone)

Novel insights into photoaging mechanisms and environmental persistence risks of polylactic acid (PLA) microplastics: Direct and indirect photolysis

Polylactic acid (PLA), as a biodegradable plastic, exhibits high sensitivity to ultraviolet (UV) radiation, yet the mechanisms and environmental risks of its photoaging remain unclear. This study uses quantum chemical calculations (DFT and TD-DFT) and kinetic simulations to explore the direct and indirect photoaging of PLA. Direct photoaging indicates that the highest oscillator intensity absorption peaks occurred at 172 and 246 nm, corresponding to the 13th singlet (S13) and 48th triplet (T48) states, thereby initiating the Norrish I and Norrish II mechanisms. The innovative "electron-hole" technology effectively clarifies the variations in photoaging mechanisms under different wavelengths. Indirect photoaging involves multiple reactive oxygen species (ROS) like •OH, 1O2, •O2-, and •HO2. The study confirms the anhydride production hypothesis and proposes two novel •OH-induced mechanisms: carbonyl carbon addition and branched methyl hydrogen dehydrogenation. Both mechanisms are thermodynamically advantageous, but their products pose potential environmental risks. ROS species and concentrations impact both PLA's photoaging mechanisms and environmental persistence. Low •OH concentration in northeast China, especially in winter, suggests a significant photoaging risk. This study offers pioneering insights into photoaging mechanisms and emphasizes the pivotal role of ROS, offering recommendations for managing PLA environmental impacts and fates in China.

Comprehensive Understanding on the Aging Process and Mechanism of Microplastics in the Sediment-Water Interface: Untangling the Role of Photoaging and Biodegradation

Microplastics (MPs) in coastal wetlands have been of great concern, but information on the aging behavior of MPs in the sediment-water interface is still lacking. In this study, the contribution of a typical abiotic (photoaging) and biotic (biodegradation) process and the underlying aging pathway of MPs with different degradabilities (including polypropylene, polyethylene terephthalate, and polylactic acid) were studied. With a quantified relative importance of photoaging (>55%) vs biodegradation, the crucial contribution of photoaging on MP aging was highlighted. This was likely attributed to more generation of reactive oxygen species (ROS) under sunlight irradiation conditions, containing O2•- and H2O2. By raising higher the level of malondialdehyde (0.5-3.5 times as high as that in the dark condition), these photochemically formed ROS caused oxidative stress and inhibited the selective attachment of plastic-degrading microbes on the MP surface, thereby weakening the effect of biodegradation. On this basis, the aging characteristics and potential pathway of different MPs were revealed. The functional group of nondegradable polypropylene tends to be broken by ROS first, while biodegradation (Arthrobacter oryzae and Bacillus sp.) played a relatively dominant role in biodegradable polylactic acid. This study provides a new sight for the understanding on the aging behaviors of MPs in the sediment-water interface.

The effect of additives on the biodegradation of polyhydroxyalkanoate (PHA) in marine field trials

The persistence of conventional fossil fuel-derived plastics in marine ecosystems has raised significant environmental concerns. Biodegradable plastics are being explored as an alternative. This study investigates the biodegradation behaviour in two marine environments of melt-extruded sheets of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) bioplastic as well as blends of PHBV with a non-toxic plasticiser (triethyl citrate, TEC) and composites of PHBV with wood flour. Samples were submerged for up to 35 weeks in two subtropical marine conditions: on the sandy seabed in the sublittoral benthic zone and the sandy seabed of an open air mesocosm with pumped seawater. Rates of biodegradation, lag times and times to 95 % mass loss (T95) were determined through mass loss data and Gompertz modelling. Mechanisms of biodegradation were studied through changes in molecular weight, mechanical properties and surface features. Results reveal a rapid biodegradation rate for all PHBV samples, demonstrating a range of specific biodegradation rates relative to exposed surface area of 0.03 ± 0.01 to 0.09 ± 0.04 mg.d-1.cm-2. This rapid rate of biodegradation meant that the subtle variations in biodegradation mechanisms across different sample thicknesses and additive compositions had little effect on overall lifetimes, with the T95 for most samples being around 250-350 days, regardless of site, highlighting the robust biodegradability of PHBV in seawater. It was only the PHBV-wood flour composite that showed faster biodegradation, and that was only in the exposed ocean site. The mesocosm site was otherwise shown to be a good model for the open ocean, with very comparable biodegradation rates and changes in mechanical properties over time.

Effect of Aging on Tensile and Chemical Properties of Polylactic Acid and Polylactic Acid-Like Polymer Materials for Additive Manufacturing

Additive manufacturing, with its fast development and application of polymeric materials, led to the wide utilization of polylactic acid (PLA) materials. As a biodegradable and biocompatible aliphatic polyester, produced from renewable sources, PLA is widely used in different sectors, from industry to medicine and science. The aim of this research is to determine the differences between two forms of the PLA material, i.e., fused deposition modeling (FDM) printed filament and digital light processing (DLP) printed resin, followed by aging due to environmental and hygiene maintenance conditions for a period of two months. Specimens underwent 3D scanning, tensile testing, and Fourier transform infrared (FTIR) spectrometry to obtain insights into the material changes that occurred. Two-way Analysis of Variance (ANOVA) statistical analysis was subsequently carried out to determine the statistical significance of the determined changes. Significant impairment can be observed in the dimensional accuracies between both materials, whether they are non-aged or aged. The mechanical properties fluctuated for aged FDM specimens: 15% for ultimate tensile stress, 15% for elongation at yield, and 12% for elastic modulus. Regarding the DLP aged specimens, the UTS decreased by 61%, elongation at yield by around 61%, and elastic modulus by 62%. According to the FTIR spectral analysis, the PLA materials degraded, especially in the case of resin specimens. Aging also showed a significant influence on the elastic modulus, ultimate tensile stress, elongation at yield, elongation at break, and toughness of both materials, which was statistically shown by means of a two-way ANOVA test. The data collected in this research give a better understanding of the underlying aging mechanism of PLA materials.

Evaluation and Modeling of Polylactide Photodegradation under Ultraviolet Irradiation: Bio-Based Polyester Photolysis Mechanism

In our study, we investigated the accelerated aging process of PLA under 253.7 nm UV-C irradiation with the use of the GPC, NMR, FTIR, and DSC methods and formal kinetic analysis. The results of GPC and DSC indicated a significant degree of destructive changes in the PLA macromolecules, while spectroscopic methods NMR and FTIR showed maintenance of the PLA main structural elements even after a long time of UV exposure. In addition to that, the GPC method displayed the formation of a high molecular weight fraction starting from 24 h of irradiation, and an increase in its content after 144 h of irradiation. It has been shown for the first time that a distinctive feature of prolonged UV exposure is the occurrence of intra- and intermolecular radical recombination reactions, leading to the formation of a high molecular weight fraction of PLA decomposition products. This causes the observed slowdown of the photolysis process. It was concluded that photolysis of PLA is a complex physicochemical process, the mechanism of which depends on morphological changes in the solid phase of the polymer under UV radiation.

Vegetal Polyphenol Extracts as Antioxidants for the Stabilization of PLA: Toward Fully Biobased Polymer Formulation

The use of natural antioxidants as substitutes for traditional synthetic stabilizers has been investigated for the stabilization of biobased and biodegradable polymers, with the aim of designing fully biobased plastic formulations. This study focused on the thermo- and photostabilization of poly(lactic acid) (PLA) using vegetal polyphenol extracts as biosourced antioxidants. The polyphenols were extracted by microwave-assisted extraction from the valorization of vegetal waste, and their potential as antioxidant additives was evaluated (e.g., polyphenol content, composition, and antioxidant activity). PLA was then formulated with 2 wt % of the extracts exhibiting the highest antioxidant activities: green tea residues, pomegranate peels, grape marc, bramble leaves, and yellow onion peel extracts. The efficiency of the natural additives as thermal stabilizers was evaluated and compared with a synthetic antioxidant using rheological and thermal analyses. The results demonstrated the capacity of grape marc extract and pomegranate peel extract to significantly improve PLA thermal stability during processing and thermo-oxidation. Finally, photorheology was conducted to evaluate the influence of the bioadditives on the biopolyester photodegradation. The different polyphenol extracts seemed to significantly hinder the photo-oxidation of PLA and constitute very promising natural UV stabilizers, combining UV absorbers and antioxidant functions.

Photodegradation of biodegradable plastics in aquatic environments: Current understanding and challenges

Direct and indirect photolysis are important abiotic processes in aquatic environments through which plastics can be transformed physically and chemically. Transport of biodegradable plastics in water is influenced by vertical mixing and turbulent flow, which make biodegradable plastics remain susceptible to sunlight and photolysis despite their high density. In general, biodegradable plastics are composed of ester containing polymers (e.g., poly(butylene succinate), polyhydroxyalkanoate, and polylactic acid), whereas non-biodegradable plastics are composed of long chains of saturated aliphatic hydrocarbons in their backbones (e.g., polyethylene, polypropylene, and polystyrene). Based on the reviewed knowledge and discussion, we may hypothesize that 1) direct photolysis is more pronounced for non-biodegradation than for biodegradable plastics, 2) smaller plastics such as micro/nano-plastics are more prone to photodegradation and photo-transformation by direct and indirect photolysis, 3) the production rate of reactive oxygen species (ROS) on the surface of biodegradable plastics is higher than that of non-biodegradable plastics, 4) the photodegradation of biodegradable plastics may be promoted by ROS produced from biodegradable plastics themselves, and 5) the subsequent reactions of ROS are more active on biodegradable plastics than non-biodegradable plastics. Moreover, micro/nanoplastics derived from biodegradable plastics serve as more effective carriers of organic pollutants than those from non-biodegradable plastics and thus biodegradable plastics may not necessarily be more ecofriendly than non-biodegradable plastics. However, biodegradable plastics have been largely unexplored from the viewpoint of direct or indirect photolysis. Roles of reactive oxygen species originating from biodegradable plastics should be further explored for comprehensively understanding the photodegradation of biodegradable plastics.

Explication of mechanism governing atmospheric degradation of 3D-printed poly(lactic acid) (PLA) with different in-fill pattern and varying in-fill density

With the popularity of 3D-printing technology, poly(lactic acid) (PLA) has become a very good option for layer by layer printing as it is easy to handle, environment friendly, has low costs and most importantly, it is highly adaptable to different materials including carbon, nylon and some other fibres. PLA is an aliphatic poly-ester that is 100% bio-based and is bio-degradable as well. It is one of the rare bio-polymers to compete with traditional polymers in terms of performance and environmental impact. However, PLA is sensitive to water and susceptible to degradation under natural conditions of ultra-violet rays (UV), humidity, fumes, etc. There are many reports on the bio-degradation and photo-degradation of PLA which deal with the accelerated weathering test. However, the accelerated weathering test instruments lack the ability to correlate the stabilities maintained by the test with the actual occurrences during natural exposure. Thus, an attempt has been made in the present work to expose the 3D-printed PLA samples to actual atmospheric conditions of Aurangabad city (M.S.) in India. The degradation of PLA after the exposure is studied and a mechanism is elucidated. Additionally, the tensile properties of the PLA samples are evaluated to correlate the extent of degradation and the material performance. It was found that though the performance of PLA deteriorates with the exposure time, the combination of in-fill pattern and volume plays an important role on the tensile properties and the extent of degradation. It is concluded herein that with natural exposure, the degradation of PLA occurs in two stages, supported by a side reaction. Thus, this study offers a new perspective towards the life of components in actual application by exposing PLA to the natural atmosphere and evaluating its strength and structure.

Biodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments

Finding alternatives to diminish plastic pollution has become one of the main challenges of modern life. A few alternatives have gained potential for a shift toward a more circular and sustainable relationship with plastics. Biodegradable polymers derived from bio- and fossil-based sources have emerged as one feasible alternative to overcome inconveniences associated with the use and disposal of non-biodegradable polymers. The biodegradation process depends on the environment's factors, microorganisms and associated enzymes, and the polymer properties, resulting in a plethora of parameters that create a complex process whereby biodegradation times and rates can vary immensely. This review aims to provide a background and a comprehensive, systematic, and critical overview of this complex process with a special focus on the mesophilic range. Activity toward depolymerization by extracellular enzymes, biofilm effect on the dynamic of the degradation process, CO2 evolution evaluating the extent of biodegradation, and metabolic pathways are discussed. Remarks and perspectives for potential future research are provided with a focus on the current knowledge gaps if the goal is to minimize the persistence of plastics across environments. Innovative approaches such as the addition of specific compounds to trigger depolymerization under particular conditions, biostimulation, bioaugmentation, and the addition of natural and/or modified enzymes are state-of-the-art methods that need faster development. Furthermore, methods must be connected to standards and techniques that fully track the biodegradation process. More transdisciplinary research within areas of polymer chemistry/processing and microbiology/biochemistry is needed.

Natural Ageing of PLA Filaments, Can It Be Frozen?

The physical ageing of polylactic acid (PLA) is a phenomenon that changes the material’s properties over time. This ageing process is highly dependent on ambient variables, such as temperature and humidity. For PLA, the ageing is noticeable even at room temperatures, a process commonly referred to as natural ageing. Stopping the ageing by freezing the material can be helpful to preserve the properties of the PLA and stabilise it at any time during its storage until it is required for testing. However, it is essential to demonstrate that the PLA’s mechanical properties are not degraded after defrosting the samples. Four different methods for stopping the ageing (anti-ageing processes) are analysed in this paper—all based on freezing and defrosting the PLA samples. We determine the temperature and ambient water vapor influence during the freezing and defrosting process using desiccant and zip bags. The material form selected is PLA filaments (no bulk material or scaffold structures) printed at 190 °C with diameters between 400 and 550 µm and frozen at −24 °C in the presence or absence of a desiccant. The impact of the anti-ageing processes on PLA’s ageing and mechanical integrity is studied regarding the thermal, mechanical and fractographical properties. In conclusion, an anti-ageing process is defined to successfully stop the natural ageing of the PLA for an indefinite length of time. This process does not affect the mechanical properties or the structural integrity of the PLA. As a result, large quantities of this material can be produced in a single batch and be safely stored to be later characterised under the same manufacturing and ageing conditions, which is currently a limiting factor from an experimental point of view as polymeric filament properties can show significant variety from batch to batch.

Polylactic acid effectively reinforced with reduced graphitic oxide

The present study was developed to reinforce a thermoplastic matrix with carbonaceous material to improve its thermal and mechanical properties. Composite materials formed from the homogenization of polylactic acid (PLA) and reduced graphitic oxide (RGO) were synthesized and characterized, reinforcement of the polymer’s thermomechanical properties and the adequate homogeneity ratio in the dispersion of the composite material were studied. Graphitic oxide (GO) was synthesized by the modified Hummers method, followed by thermal exfoliation. The chemical composition and the structure of RGO were studied by infrared (FT-IR) and Raman spectroscopies, respectively. PLA composites with different RGO contents (2 and 3% by weight) were prepared and compared in terms of distribution of RGO in the matrix and morphology, using scanning electron microscopy. The thermal stability of the composites was determined through thermogravimetric analysis. Torque of the different composites was measured, which increased at 21%; the tensile test showed an improvement in the mechanical parameters of the composites because the RGO favors the rigidity of the composite. In addition, the oxygenated functional groups present in the RGO allowed a more significant interaction with the PLA matrix, which results in an effective reinforcement of the mechanical properties of the composite material.

Improvement in Thermochromic Offset Print UV Stability by Applying PCL Nanocomposite Coatings

Thermochromic (TC) printing inks change their colouration as a response to a change in temperature. This ability renders them attractive for various applications such as smart packaging, security printing, and marketing, but their application is limited due to their low UV stability, i.e., loss of their thermochromic effect when exposed to UV radiation. In order to improve the UV stability of TC prints, one offset TC printing ink was printed and coated with nanomodified polycaprolactone (PCL) coating. The coating was prepared with the incorporation of 1%, 2%, and 3% mass ratios of ZnO and TiO₂ nanoparticles in the PCL matrix. The prepared nanocomposite coatings were applied onto the TC print and exposed to UV radiation; afterwards, they were characterized by the colour properties of prints, SEM microscopy, FTIR, and fluorescence spectroscopy. SEM microscopy, FTIR, and fluorescence spectroscopy showed higher rates of polymer degradation, and the results of colour stability indicated that 3% TiO₂ in PCL matrix gave the best UV stability and protection of TC prints.

A Critical Review of the Performance and Soil Biodegradability Profiles of Biobased Natural and Chemically Synthesized Polymers in Industrial Applications

This review explores biobased polymers for industrial applications, their end fate, and most importantly, origin and key aspects enabling soil biodegradation. The physicochemical properties of biobased synthetic and natural polymers and the primary factors governing degradation are explored. Current and future biobased systems and factors allowing for equivalent comparisons of degradation and possible sources for engineering improved biodegradation are reviewed. Factors impacting ultraviolet (UV) stability of biopolymers have been described including methods to enhance photoresistance and impact on biodegradation. It discusses end-fate of biopolymers in soil and impact of residues on soil health. A limited number of studies examine side effects (e.g., microbial toxicity) from soil biodegradation of composites and biopolymers. Currently available standards for biodegradation and composting have been described with limitations and scope for improvements. Finally, design considerations and implications for sustainable polymers used, under consideration, and to be considered within the context of a rational biodegradable strategy are elaborated.

Suitability of EtO Sterilization for Polydopamine-coated, Self-fitting Bone Scaffolds

Irregularly shaped craniomaxillofacial (CMF) defects may be advantageously treated by "self-fitting" shape memory polymer (SMP) scaffolds, namely those prepared from poly(ε-caprolactone)diacrylate (PCL-DA) networks and PCL-DA/poly(L-lactic acid) (PLLA) (75:25 wt%) semi-interpenetrating polymer networks (semi-IPNs). In addition to achieving good scaffold-tissue contact, a polydopamine (PD) coating can be leveraged to enhance bioactivity for improved osseointegration. Sterilization with ethylene oxide (EtO) represents a logical choice due to its low operating temperature and humidity. Herein, for the first time, the impact of EtO sterilization on the material properties of PD-coated SMP scaffolds was systematically assessed. Morphological features (i.e., pore size and pore interconnectivity), and in vitro bioactivity were preserved as were PCL crystallinity, PLLA crystallinity, and crosslinking. These latter features led to sustained shape memory properties, and compressive modulus. EtO-sterilized, PD-coated scaffolds displayed similar in vitro degradation behaviors versus analogous non-sterilized scaffolds. This included maintenance of compression modulus following 28 days of exposure to non-accelerated degradation conditions.

Biodegradable plastics in the air and soil environment: Low degradation rate and high microplastics formation

In recent years, the promotion and use of biodegradable plastics (BPs) are growing into a general trend. Here the degradation performance of different types of BPs was investigated in the natural environment. Their degradation levels followed the order of pure BPs> BP blends> claimed "BP"≈ non-biodegradable plastic after 6-month incubation. Photo- and biodegradation were the main degradation mechanisms of these plastics in the air and soil, respectively. Poly(p-dioxanone) (PPDO) exhibited the highest weight loss potentials in both air (54.7 ± 9.1%) and soil (56.8 ± 4.8%), due to its special ether bond and the rich and diverse microorganisms on its biofilms. The microbiota on PPDO was distinct and enriched with Chloroflexi and Firmicutes that responsible for carbon cycle and organic degradation. The weight loss was only 1.1-8.0% for poly(lactic acid), and 0.8-6.8% for poly(butylene adipate-co-terephthalate), and other plastics are basically non-degradable. Of note, numerous microplastics were formed after PPDO degradation, with 441 ± 326 and 2103 ± 131 item/g plastic in the air and soil, respectively. Taken together, the monitoring of BP biodegradation in the natural environment is of vital importance, and it is risky to promote large-scale application of BPs if the knowledge gap of their environmental behavior has not been well addressed.

Characterisation and Modelling of PLA Filaments and Evolution with Time

The properties of polylactic acid (PLA) filaments have not yet been analysed in detail, and they are strongly affected by the extrusion process used in some additive manufacturing systems. Here we present the mechanical, thermal, physical, and fractographical properties of an extruded filament (not the bulk material or scaffolds), the basic building block of any PLA structure printed via material extrusion. This research aims to create a reference point for the modelisation of additively manufactured structures via extrusion processes, as the main building block is characterised in detail for a deep understanding. Furthermore, we investigated the natural ageing (up to one year), the effect of the printing (extruding) temperature (180 and 190 °C), and the effect of the crosshead speed during the tensile tests (10⁻¹ to 10² mm/min) to provide a deeper analysis of the material. The results showed that the material extruded at 190 °C performed better than the material extruded at 180 °C. However, after one hundred days of natural ageing, both materials behaved similarly. This was related to the flow-induced molecular orientation during the extrusion. The crosshead rate produced a logarithmic increase of the mechanical properties, consistent with the Eyring model. Additionally, the ageing produced significant changes in both the elastic modulus and the yield strength: from 2.4 GPa and 40 MPa, in one-day-aged samples, up to 4 GPa and 62 MPa once entirely aged. Finally, it was observed that the glass transition and the enthalpic relaxation increased with ageing, agreeing with the Kohlraushch–William–Watts model.

Cytotoxicity Study of UV-Laser-Irradiated PLLA Surfaces Subjected to Bio-Ceramisation: A New Way towards Implant Surface Modification

In this research we subjected samples of poly(L-lactide) (PLLA) extruded film to ultraviolet (193 nm ArF excimer laser) radiation below the ablation threshold. The modified film was immersed in Simulated Body Fluid (SBF) at 37 °C for 1 day or 7 days to obtain a layer of apatite ceramic (CaP) coating on the modified PLLA surface. The samples were characterized by means of optical profilometry, which indicated an increase in average roughness (Ra) from 25 nm for the unmodified PLLA to over 580 nm for irradiated PLLA incubated in SBF for 1 day. At the same time, the water contact angle decreased from 78° for neat PLLA to 35° for irradiated PLLA incubated in SBF, which suggests its higher hydrophilicity. The obtained materials were investigated by means of cell response fibroblasts (3T3) and macrophage-like cells (RAW 264.7). Properties of the obtained composites were compared to the unmodified PLLA film as well as to the UV-laser irradiated PLLA. The activation of the PLLA surface by laser irradiation led to a distinct increase in cytotoxicity, while the treatment with SBF and the deposition of apatite ceramic had only a limited preventive effect on this harmful impact and depended on the cell type. Fibroblasts were found to have good tolerance for the irradiated and ceramic-covered PLLA, but macrophages seem to interact with the substrate leading to the release of cytotoxic products.

Comprehensive exploration of natural degradation of poly(lactic acid) blends in various degradation media: A review

Poly(lactic acid) (PLA), a bio-based polyester, has been extensively investigated in the recent past owing to its excellent mechanical properties. Several studies have been conducted on PLA blends, with a focus on improving the brittleness of PLA to ensure its suitability for various applications. However, the increasing use of PLA has increased the contamination of PLA-based products in the environment because PLA remains intact even after three years at sea or in soil. This review focuses on analyzing studies that have worked on improving the degradation properties of PLA blends and studies how other additives affect degradation by considering different degradation media. Factors affecting the degradation properties, such as surface morphology, water uptake, and crystallinity of PLA blends, are highlighted. In natural, biotic, and abiotic media, water uptake plays a crucial role in determining biodegradation rates. Immiscible blends of PLA with other polymer matrices cause phase separation, increasing the water absorption. The susceptibility of PLA to hydrolytic and enzymatic degradation is high in the amorphous region because it can be easily penetrated by water. It is essential to study the morphology, water absorption, and structural properties of PLA blends to predict the biodegradation properties of PLA in the blends.

Effect of Moisture Content on the Processing and Mechanical Properties of a Biodegradable Polyester

This work is focused on the influence of moisture content on the processing and mechanical properties of a biodegradable polyester used for applications in injection molding. The pellets of the biodegradable polyester were exposed under different relative humidity conditions at a constant temperature before being compression molded. The compression-molded specimens were again placed under the above conditions before the mechanical testing. With all these samples, it is possible to determine the effect of moisture content on the processing and mechanical properties separately, as well as the combined effect of moisture content on the mechanical properties. The results obtained showed that the amount of absorbed water-both before processing and before mechanical testing-causes an increase in elongation at break and a slight reduction of the elastic modulus and tensile strength. These changes have been associated with possible hydrolytic degradation during the compression molding process and, in particular, with the plasticizing action of the moisture absorbed by the specimens.

DOPO-Decorated Two-Dimensional MXene Nanosheets for Flame-Retardant, Ultraviolet-Protective, and Reinforced Polylactide Composites

This study presents a novel and facile strategy for fabricating fire-resistant, ultraviolet (UV)-shielding, and tensile-enhanced polylactide (PLA) composites using two-dimensional (2D) MXene (Ti₃C₂) flakes chemically modified with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO). The thermal and burning performances of PLA composites were demonstrated by the limiting oxygen index, UL-94 test, and cone calorimetry. The UV-shielding and tensile performances were also examined. The results revealed that PLA/Ti₃C₂-DOPO (3 wt %) displayed a V-0 rating in the UL-94 test. The enhancement against fire hazard was reflected by the significant reduction in the peak heat release rate (33.7%), total heat release (47%), peak CO production (58.8%), and total smoke production (41.7%). The improved fire-safety performance of the composites is attributed to the interplay of catalytic, barrier, and condensed effects of the Ti₃C₂-DOPO nanosheets in the PLA matrix. PLA/Ti₃C₂-DOPO also showed an increase (∼9%) in tensile strength and an "Excellent" level (UPF 50+) in the UV-protection assessment. In all, this study introduces a novel chemical modification strategy for 2D MXene flakes to fabricate multifunctional PLA composites, which are promising candidates for next-generation sustainable and protective plastic products.

Structure and properties of in situ reactive blend of polylactide and thermoplastic starch

In this study, in situ reactive extrusion of polylactide and thermoplastic starch modified with chloropropyl trimethoxysilane coupling agent (PLA/mTPS) is proposed. The success of covalent bond formation between PLA matrix and mTPS phase is clarified by two-dimensional nuclear magnetic resonance (2D-NMR) spectroscopy with ¹H¹H TOCSY mode. This chemically bound PLA with starch gives the remarkable compatibility in the PLA/mTPS film, with not only a decreased glass transition temperature (47 °C) but also an increased crystallinity of PLA (Χ_c of 50%). It consequently increases oxygen barrier significantly and also enhances the film flexibility as observed from the drastic increase of elongation at break (from 3% to 50%). Moreover, the PLA/mTPS 60/40 (w/w) film exhibits the accelerated degradation as compared with pure PLA film.

Biodegradation of Hemicellulose-Cellulose-Starch-Based Bioplastics and Microbial Polyesters

The volume of discarded solid wastes, especially plastic, which accumulates in large quantities in different environments, has substantially increased. Population growth and the consumption pattern of societies associated with unsustainable production routes have caused the pollution level to increase. Therefore, the development of materials that help mitigate the impacts of plastics is fundamental. However, bioplastics can result in a misunderstanding about their properties and environmental impacts, as well as incorrect management of their final disposition, from misidentifications and classifications. This chapter addresses the aspects and factors surrounding the biodegradation of bioplastics from natural (plant biomass (starch, lignin, cellulose, hemicellulose, and starch) and bacterial polyester polymers. Therefore, the biodegradation of bioplastics is a factor that must be studied, because due to the increase in the production of different bioplastics, they may present differences in the decomposition rates.

Excellent UV Resistance of Polylactide by Interfacial Stereocomplexation with Double-Shell-Structured TiO2 Nanohybrids

The durable application of polylactide (PLA) under atmospheric conditions is restricted by its poor ultraviolet (UV) stability. To improve the UV stability of polymers, titanium dioxide (TiO₂) is often used as a UV light capture agent. However, TiO₂ is also a photocatalytic agent, with detrimental effects on the polymer properties. To overcome these two conflicting issues, we used the following approach. TiO₂ nanoparticles were first coated with silicon dioxide (SiO₂) (with a SiO₂ shell content of 5.3 wt %). Subsequently, poly(d-lactide) (PDLA) was grafted onto TiO₂@SiO₂ nanoparticles, approximately 20 wt %, via a ring-opening polymerization of d-lactide to obtain well-designed double-shell TiO₂@SiO₂-g-PDLA nanohybrids. These double-shell nanoparticles could be well dispersed in a poly(l-lactide) (PLLA) matrix making use of the stereocomplexation between the two enantiomers. In our concept, the inner SiO₂ shell on the TiO₂ nanoparticles prevents the direct contact between TiO₂ and the PLLA matrix and hence considerably restricts the detrimental photocatalytic effect of TiO₂ on PLLA degradation. Additionally, the outer PDLA shell facilitates an improved dispersion of these nanohybrid particles by interfacial stereocomplexation with its enantiomer PLLA. As a consequence, the PLLA/TiO₂@SiO₂-g-PDLA nanocomposites simultaneously possess excellent UV-shielding property, high(er) tensile strength (>60 MPa), and superior UV resistance, for example, the mechanical properties remain at a level of >90% after 72 h of UV irradiation. In our view, this work provides a novel strategy to make advanced PLA nanocomposites with improved mechanical properties and excellent UV resistance, which enables potential application of PLA in more critical areas such as in durable packaging and fiber/textile applications.

Effect of ultraviolet and moisture action on biodegradable polymers and their blend

In this work, the suitability of polylactic acid (PLA), polybutylene adipate terephthalate (PBAT) and PBAT/PLA blend samples to outdoor applications were investigated in terms of mechanical, morphological and visual properties in presence of ultraviolet action and water, finding that PLA in particular can be actually considered for such applications.

Effects of Rutile-TiO2 Nanoparticles on Accelerated Weathering Degradation of Poly(Lactic Acid)

The effect of accelerated weathering on poly(lactic acid) (PLA) and a PLA nanocomposite with rutile titanium (IV) dioxide (rutile–TiO₂) was investigated. The accelerated weathering test applied consecutive steps of ultraviolet (UV) (at 340 nm and 0.76 W m⁻² irradiance) and moisture at 50 °C for 2000 h, following the ASTM D4329 standard. The morphology, chemical structure, molecular weight, crystallization, as well as mechanical and thermal properties were thoroughly studied. Samples were characterized after 500 h, 1000 h and 2000 h exposure. Different degradation mechanisms were proposed to happen during the weathering exposure and confirmed based on the experimental data. The PLA and PLA/TiO₂ surfaces presented holes and increasing roughness over the exposure time. The molecular weight of the weathered samples decreased due to chain scission during the degradation processes. Thermal stability decreased in the presence of TiO₂ and a double melting peak was observed for the PLA/TiO₂ nanocomposite. A general improvement in the mechanical properties of the PLA/TiO₂ nanocomposite was observed over time during the accelerated weathering analysis up to 1000 h of exposure time. After 2000 h of weathering exposure, the PLA and PLA/TiO₂ became extremely brittle and lost their ductile properties. This was ascribed to a significant increase in the degree of crystallinity upon weathering, which was accelerated in the presence of TiO₂. Atomic force microscopy (AFM) using amplitude modulation–frequency modulation (AM–FM) tool confirmed the mechanical changes in the surface area of the PLA samples after accelerated weathering exposure. The stiffness and Young’s modulus achieved higher values than the unweathered ones up to 1000 h of exposure time. The changes in the physical and chemical properties of PLA/TiO₂ over the ageing time confirm the photocatalytic activity of rutile–TiO₂.

Microbial Degradation of Synthetic Biopolymers Waste

Over the last ten years, the demand of biodegradable polymers has grown at an annual rate of 20–30%. However, the market share is about less than 0.1% of the total plastic production due to their lower performances, higher price and limited legislative attention in respect to the standard materials. The biodegradability as a functional added property is often not completely perceived from the final consumers. However, the opportunity to use renewable resources and to reduce the dependency from petroleum resources could become an incentive to accelerate their future growth. Renewable raw materials, coming from industrial wastes such as oilseed crops, starch from cereals and potatoes, cellulose from straw and wood, etc., can be converted into chemical intermediates and polymers, in order to substitute fossil fuel feedstock. The introduction of these new products could represent a significant contribution to sustainable development. However, the use of renewable resources and the production of the bioplastics are no longer a guarantee for a minimal environmental impact. The production process as well as their technical performances and their ultimate disposal has to be carefully considered. Bioplastics are generally biodegradable, but the diffusion of the composting technology is a prerequisite for their development. Efforts are required at industry level in order to develop less expensive and high performance products, with minimal environmental impact technologies.

The Effect of Substances of Plant Origin on the Thermal and Thermo-Oxidative Ageing of Aliphatic Polyesters (PLA, PHA)

The stabilization efficiency of flavonoids (rutin and hesperidin) in polyester (polylactide (PLA) and polyhydroxyalkaonate (PHA)) composites under oxygen at high temperature was investigated. The polymer was homogenized with three antioxidants then processed by extrusion. The effects of stabilizers on the following physicochemical properties were investigated: melt flow, Vicat softening temperature, surface energy, and color change (Cie-Lab space). The aim of this study was to improve the stability of aliphatic polyesters by extending and controlling their lifetime. Differential Scanning Calorimetry DSC and Thermogravimetric analysis DTG methods were used to confirm the stabilizing effects (the inhibition of oxidation) of flavonoids (rutin and hesperidin) on the ageing process of biodegradable polymers. The levels of migration of plant antioxidants from PLA and PHA were determined and compared to the industrial stabilizer (Chimassorb 944 UV absorber). Based on this study, a comparable-to-higher efficiency of the proposed flavonoids for the stabilization of polyesters was found when compared to the commercial stabilizers. Thus, in the future, natural plant-derived substances may replace toxic hindered amines, which are commonly used as light stabilizers (HALS-Hindered Amine Light Stabilizers) in the polymer industry.

Biodegradable Stents for Congenital Heart Disease

The quest for an ideal biodegradable stent for both adult coronary and pediatric congenital heart disease applications continues. Over the past few years, a lot of progress has been made toward development of a dedicated pediatric biodegradable stent that can be used for congenital heart disease applications. At present, there are no biodegradable stents available for use in congenital heart disease. In this article, the authors review the different biodegradable materials and their limitations and provide an overview of the current biodegradable stents being evaluated for congenital heart disease applications.

Specific Mechanical Energy and Thermal Degradation of Poly(lactic acid) and Poly(caprolactone)/Date Pits Composites

The compatibility of date pits (DP) with polylactic acid (PLA) or polycaprolactone (PCL) is investigated. Composites were prepared by compounding PLA or PCL with date pits at 10, 20, 30, and 40% wt/wt and extruded. Wheat vital gluten (VG) was also used as a filler and in combination with DP. The specific mechanical energy (SME) was calculated and the composites thermal properties were tested using DSC (peak temperature, enthalpic relaxation, and glass transition) and TGA (degradation temperature and mechanism and degradation kinetics). Because DP is hard filler, the SME of PCL-DP composites increased as the amount of filler increased. At 40% fill, the SME decreased due to the lubricating effect of oil found naturally in DP. As illustrated by lower SME, PLA composites exhibited softer texture because PLA is harder than DP. The DSC melting peak temperature of both polymers has increased at higher DP; however, PLA exhibited enthalpic relation between 66 and 68°C. The TGA profile of the composites displayed two distinct peaks versus one peak for the pure polymer. The degradation kinetics showed multistep process for the composites and one-step process for the pure polymer. The utilization of date pits as a hard filler in developing biodegradable plastics is good for the environment and a value added for the date industry.

Poly(lactic acid)-Mass production, processing, industrial applications, and end of life

Global awareness of material sustainability has increased the demand for bio-based polymers like poly(lactic acid) (PLA), which are seen as a desirable alternative to fossil-based polymers because they have less environmental impact. PLA is an aliphatic polyester, primarily produced by industrial polycondensation of lactic acid and/or ring-opening polymerization of lactide. Melt processing is the main technique used for mass production of PLA products for the medical, textile, plasticulture, and packaging industries. To fulfill additional desirable product properties and extend product use, PLA has been blended with other resins or compounded with different fillers such as fibers, and micro- and nanoparticles. This paper presents a review of the current status of PLA mass production, processing techniques and current applications, and also covers the methods to tailor PLA properties, the main PLA degradation reactions, PLA products' end-of-life scenarios and the environmental footprint of this unique polymer.

Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review

Poly(lactic acid) (PLA), so far, is the most extensively researched and utilized biodegradable aliphatic polyester in human history. Due to its merits, PLA is a leading biomaterial for numerous applications in medicine as well as in industry replacing conventional petrochemical-based polymers. The main purpose of this review is to elaborate the mechanical and physical properties that affect its stability, processability, degradation, PLA-other polymers immiscibility, aging and recyclability, and therefore its potential suitability to fulfill specific application requirements. This review also summarizes variations in these properties during PLA processing (i.e. thermal degradation and recyclability), biodegradation, packaging and sterilization, and aging (i.e. weathering and hygrothermal). In addition, we discuss up-to-date strategies for PLA properties improvements including components and plasticizer blending, nucleation agent addition, and PLA modifications and nanoformulations. Incorporating better understanding of the role of these properties with available improvement strategies is the key for successful utilization of PLA and its copolymers/composites/blends to maximize their fit with worldwide application needs.

Effects of Accelerated Weathering in Polylactide Biocomposites Reinforced with Microcrystalline Cellulose

The aim of this study was to reveal effects of accelerated weathering in neat polylactide (PLA) and its biocomposite reinforced with microcrystalline cellulose (MCC); compounded by twin-screw extrusion melt mixing and specimen shaping by injection molding. Weathering conditions were applied via consecutive steps of UV irradiation and humidity in accordance with ISO 4892–3 standards for 200 h. Various characterization techniques and mechanical tests indicated that photolysis, photo-oxidation and hydrolysis were the main degradation mechanisms leading to significant decrease in the molecular weight of PLA via main chain scission. Consequently, except elastic modulus other mechanical properties; strength, ductility and fracture toughness of PLA and PLA/MCC decreased substantially. However, after comparing the mechanical properties of the neat PLA and PLA/MCC biocomposite specimens having 200 h of accelerated weathering, it was concluded that; for the outdoor applications use of PLA/MCC biocomposite (with only 3 wt% MCC) was extremely beneficial compared to using neat PLA. For example, tensile strength is more than 91 % beneficial while strain at break ductility is more than 2.7 times beneficial.