Effect of polymer concentration on the depolymerization of sodium alginate by the solution plasma process

Preparation of bright yellow color sodium alginate solution

Sodium alginate (SA) is a marine polysaccharide biomass material that is environmentally friendly and exhibits color-changing properties under certain conditions. In this study, we have discovered sodium alginate solution to be chromogenic under four conditions, namely alkali-chromogenic, thermo-chromogenic, force-chromogenic and photo-chromogenic. Under simple strong alkaline conditions, sodium alginate forms clusters of blue light-absorbing chromogenic aggregates, which exhibit a bright yellow color at a certain size. Under different temperature conditions, SA shows varying shades of yellow, and the color tends to stabilize after 48 h of resting. The aggregates can be dispersed by stirring, which changes SA from yellow to colorless. The yellow color can then be recovered after resting. Additionally, exposure to sunlight can cause the yellow SA to fade, but the color can be restored by reheating. Therefore, the force-chromogenic and photo-chromogenic properties are reversible. This makes it a promising material for use in color-developing and indicating materials. It is expected to become a sodium alginate cluster pigment with broad application prospects in the future.

High-level production of a novel alginate lyase (FsAly7) from Flammeovirga sp. for efficient production of low viscosity soluble dietary fiber from sodium alginate

Sodium alginate is one of the most abundant sustainable gum source for dietary fiber production. However, the preparation efficiencies of low viscosity soluble dietary fiber from sodium alginate remain low. Here, a novel alginate lyase gene (FsAly7) from Flammeovirga sp. was identified and high-level expressed in Pichia pastoris for low viscosity soluble dietary fiber production. The highest enzyme production of 3050 U mL-1 was achieved, which is by far the highest yield ever reported. FsAly7 was used for low viscosity soluble dietary fiber production from sodium alginate, and the highest degradation rate of 85.5 % was achieved under a high substrate content of 20 % (w/v). The molecular weight of obtained soluble dietary fiber converged to 10.75 kDa. FsAly7 catalyzed the cleavage of glycosidic bonds in alginate chains with formation of unsaturated non-reducing ends simultaneously in the degradation process, thus altered the chemical structures of hydrolysates. The soluble dietary fiber exhibited excellent properties, including low viscosity, high oil adsorption capacity activity (2.20 ± 0.03 g g-1) and high emulsifying activity (60.05 ± 2.96 mL/100 mL). This investigation may provide a novel alginate lyase catalyst as well as a solution for the efficient production of low viscosity soluble dietary fiber from sodium alginate.

Production of Oligoalginate via Solution Plasma Process and Its Capability of Biological Growth Enhancement

The objective of the study was to depolymerize alginate into short-length oligoalginates, adopting the simple solution plasma process (SPP) technique, for successful use in free radical scavenging and growth promotion in cell culture and agricultural practices. Alginate at various concentrations was depolymerized to oligoalginates using SPP by discharging for various times. The depolymerization into oligoalginates was proved by DNS, TLC, FT-IR, and HPAEC analyses and caused decrease in viscosity. Oligoalginates derived from 0.5% alginate (100 mg∙mL^-1) showed the highest antioxidant activities in vitro. The oligoalginates enhanced growth of the human embryonic kidney (HEK293) cells to significant levels in a concentration-dependent manner without any extent of toxicity. The oligoalginates also promoted growth of lettuce. Thus, SPP is a powerful technique to break down alginate into oligoalginates that can be utilized as a free radical scavenger and as a growth promoter of animal cells and agricultural plants.

The Effect of Using Micro-Clustered Water as a Polymer Medium

The aim of the study was to investigate the changes within the physicochemical properties of gelatin, carrageenan, and sodium alginate hydrosols prepared on the basis of micro-clustered (MC) water. The rheological parameters, contact angle and antioxidant activity of hydrosols were investigated. Moreover, the pH, oxidation–reduction potential (ORP) and electrical conductivity (EC) were measured. The hydrosols with MC water were characterized by a lower pH, decreased viscosity, a lower contact angle, and only slightly lower antioxidant activity than control samples. The results showed that hydrosol’s properties are significantly changed by MC water, which can lead to enhancement of its applicability but requires further investigation.

Insight on Solution Plasma in Aqueous Solution and Their Application in Modification of Chitin and Chitosan

Sustainability and environmental concerns have persuaded researchers to explore renewable materials, such as nature-derived polysaccharides, and add value by changing chemical structures with the aim to possess specific properties, like biological properties. Meanwhile, finding methods and strategies that can lower hazardous chemicals, simplify production steps, reduce time consumption, and acquire high-purified products is an important task that requires attention. To break through these issues, electrical discharging in aqueous solutions at atmospheric pressure and room temperature, referred to as the "solution plasma process", has been introduced as a novel process for modification of nature-derived polysaccharides like chitin and chitosan. This review reveals insight into the electrical discharge in aqueous solutions and scientific progress on their application in a modification of chitin and chitosan, including degradation and deacetylation. The influencing parameters in the plasma process are intensively explained in order to provide a guideline for the modification of not only chitin and chitosan but also other nature-derived polysaccharides, aiming to address economic aspects and environmental concerns.

Preparation of low-molecular-weight sodium alginate by ozonation

Low-molecular-weight sodium alginate (LMWSA) has been reported to possess unique physicochemical properties and bioactivities. There is little information available about degradation of sodium alginate by ozonation. Effect of ozonation on molecular weight, molecular weight distribution, color change, M/G ratio, and chemical structure of sodium alginate was investigated. The molecular weight of sodium alginate decreased from 972.3 to 76.7 kDa in the 80-min period of ozonation at 25 °C. Two different degradation-rate constants were calculated. Molecular weight distribution of the LMWSA changed appreciably. Ozonation cannot lead to color change of LMWSA. The M/G ratio of LMWSA was not altered significantly, compared with that of the original alginate. The FT-IR and ¹³C NMR spectra indicated the chemical structure of LMWSA obtained by ozonation was not altered appreciably. New insight into the ozonation of alginate will be promisingly opened up. Ozonation of sodium alginate can be a alternative for production of LMWSA.

Multi-response optimization of alginate bleaching technology extracted from brown seaweeds by an eco-friendly agent

Alginate only finds industrial applicability after undergoing a bleaching process to improve its visual appearance. Box-Behnken Design was used to optimize bleaching parameters (time, oxygen flow and temperature) for sodium alginate (SA) extracted from seaweeds using ozone as the bleaching agent. The optimal conditions (oxygen flow 2 L/min for 35 min at 25 °C) resulted in an ozone-bleached SA with a mannuronic/guluronic acids ratio of 0.70, viscosity-average molecular weight of 66.30 kDa and dynamic viscosity of 1.39 mPa.s, aligned to strong and brittle gels formation, which are potentially suitable for hydrogels and bioink application. Results indicated that ozonation caused depolymerization of the SA chain. Colorimetric parameters showed that ozone has a great bleaching efficacy. The bleached sample presented high antioxidant capacity, highlighting that discoloration by ozone might have minimal effects on the bioactive compounds which are valuable ingredients for food-based products.

Preparation of alginate oligosaccharides and their biological activities in plants: A review

Alginate oligosaccharide (AOS) is the degradation product of alginates extracted from brown algae. As a multifunctional oligomer, it has attracted widespread attention in plant research. Different methods of preparation generate AOS possessing diverse structural properties, and result in differences in AOS activity. In this review, the methods of preparation and characterization of AOS are briefly summarized, followed by a systematic introduction to the activity and mechanisms of AOS in plants. AOS can act as a growth promoter at different growth stages of plants. AOS also enhances resistance to pathogens, drought, salt, heavy metals and other stressors by triggering plant immunity, exerting bioactivity just like a pathogen-associated molecular pattern. In addition, AOS can regulate ABA biosynthesis and metabolite to preserve fruit quality and enhance shelf life. This review provides a comprehensive summary of the biological activity of AOS in plants, which will support research and the application of AOS treatments for plants in the future.

Effect of electrical discharge plasma on cytotoxicity against cancer cells of N,O-carboxymethyl chitosan-stabilized gold nanoparticles

Electrical discharge plasma in a liquid phase can generate reactive species, e.g. hydroxyl radical, leading to rapid reactions including degradation of biopolymers. In this study, the effect of plasma treatment time on physical properties and cytotoxicity against cancer cells of N,O-carboxymethyl chitosan-stabilized gold nanoparticles (CMC-AuNPs) was investigated. AuNPs were synthesized by chemical reduction of HAuCl₄ in 2 % CMC solution to obtain CMC-AuNPs, before being subjected to the plasma treatment. Results showed that the plasma treatment not only led to the reduction of hydrodynamic diameters of CMC-AuNPs from 400 nm to less than 100 nm by the plasma-induced degradation of CMC but also provided the narrow size distribution of AuNPs having diameters in the range of 2-50 nm, that were existing in CMC-AuNPs. In addition, the plasma-treated CMC-AuNPs could significantly reduce the percentage of cell viability of breast cancer cells by approximately 80 % compared to the original CMC and CMC-AuNPs.

Simultaneous deacetylation and degradation of chitin hydrogel by electrical discharge plasma using low sodium hydroxide concentrations

Electrical discharge plasma occurring in a liquid phase, so called solution plasma, can generate highly active species, e.g. free radicals, which can involve in various chemical reactions, leading to less chemical uses. In this study, solution plasma was applied to deacetylation of chitin aiming to reduce the use of alkali. It was found that solution plasma could induce deacetylation of chitin hydrogels that were dispersed in MeOH/water solutions containing low NaOH concentrations (1-12%). Due to the action of free radicals, some extent of chain session of the polymer occurred during the plasma treatment. The degree of deacetylation and molecular weight of the obtained chitosan were 78% and 220 kDa, respectively, after the plasma treatment for five cycles (1 h/cycle) by using 90% MeOH/water solution containing 12% NaOH. The obtained chitosan could completely dissolve in 2% acetic acid solution and had antibacterial activities against S. aureus and E. coli.

Cytotoxicity against cancer cells of chitosan oligosaccharides prepared from chitosan powder degraded by electrical discharge plasma

Chitosan oligosaccharides, which obtain from degradation of chitosan, possess some interesting molecular weight-dependent biological properties, especially anticancer activity. Therefore, the conversion of chitosan to chitosan oligosaccharides with specific molecular weight has been continuously investigated in order to find effective strategies that can achieve both economic feasibility and environmental concerns. In this study, a novel process was developed to heterogeneously degrade chitosan powder by highly active species generated by electrical discharge plasma in a dilute salt solution (0.02 M) without the addition of other chemicals. The degradation rate obtained from the proposed process was comparable to that obtained from some other methods with the addition of acids and oxidizing agents. Separation of the water-soluble degraded products containing chitosan oligosaccharides from the reaction solution was simply done by filtration. The obtained chitosan oligosaccharides were further evaluated for an influence of their molecular weights on cytotoxicity against cancer cells and the selectivity toward cancer and normal cells.

Enhanced degradation of chitosan by applying plasma treatment in combination with oxidizing agents for potential use as an anticancer agent

Solution plasma (SP) treatment in combination with oxidizing agents, i.e., hydrogen peroxide (H₂O₂), potassium persulfate (K₂S₂O₈) and sodium nitrite (NaNO₂) were adopted to chitosan degradation in order to achieve fast degradation rate, low chemicals used and high yield of low-molecular-weight chitosan and chitooligosaccharide (COS). Among the studied oxidizing agents, H₂O₂ was found to be the best choice in terms of appreciable molecular weight reduction without major change in chemical structure of the degraded products of chitosan. By the combination with SP treatment, dilute solution of H₂O₂ (4-60mM) was required for effective degradation of chitosan. The combination of SP treatment and dilute solution of H₂O₂ (60mM) resulted in the great reduction of molecular weight of chitosan and water-soluble chitosan was obtained as a major product. The resulting water-soluble chitosan was precipitated to obtain COS. An inhibitory effect against cervical cancer cell line (HeLa cells) of COS was also examined.

Fastest Formation Routes of Nanocarbons in Solution Plasma Processes

Although solution-plasma processing enables room-temperature synthesis of nanocarbons, the underlying mechanisms are not well understood. We investigated the routes of solution-plasma-induced nanocarbon formation from hexane, hexadecane, cyclohexane, and benzene. The synthesis rate from benzene was the highest. However, the nanocarbons from linear molecules were more crystalline than those from ring molecules. Linear molecules decomposed into shorter olefins, whereas ring molecules were reconstructed in the plasma. In the saturated ring molecules, C-H dissociation proceeded, followed by conversion into unsaturated ring molecules. However, unsaturated ring molecules were directly polymerized through cation radicals, such as benzene radical cation, and were converted into two- and three-ring molecules at the plasma-solution interface. The nanocarbons from linear molecules were synthesized in plasma from small molecules such as C2 under heat; the obtained products were the same as those obtained via pyrolysis synthesis. Conversely, the nanocarbons obtained from ring molecules were directly synthesized through an intermediate, such as benzene radical cation, at the interface between plasma and solution, resulting in the same products as those obtained via polymerization. These two different reaction fields provide a reasonable explanation for the fastest synthesis rate observed in the case of benzene.

Synthesis of colloidal MnO2with a sheet-like structure by one-pot plasma discharge in permanganate aqueous solution

Stable colloidal MnO₂—consisting of MnO₂with a sheet-like structure—was synthesized by solution plasma process (SPP) in one-step and without utilizing any dispersants or stabilizers.

Synthesis of heteroatom-carbon nanosheets by solution plasma processing using N-methyl-2-pyrrolidone as precursor

Heteroatom-carbon nanosheets, composed of multi-layer graphene with turbostratic stacking, were successfully synthesized through a solution plasma processing (SPP) with N-methyl-2-pyrrolidone at room temperature and an atmospheric pressure.

Production of ultra-high concentration calcium alginate beads with prolonged dissolution profile

Ultra-high concentration (UHC) calcium alginate beads produced by temperature-controlled extrusion-dripping system show prolonged dissolution profile.

Solution plasma exfoliation of graphene flakes from graphite electrodes

Proposed mechanisms for the bubble formation on the graphite electrodes discharged in distilled water.

Depolymerization of chitosan-metal complexes via a solution plasma technique

Chitosan-metal complexes were depolymerized under acidic conditions using a solution plasma system. Four different types of metal ions, including Ag(+), Zn(2+), Cu(2+), and Fe(3+) ions, were added to the chitosan solution at a metal-to-chitosan molar ratio of 1:8. The depolymerization rate was affected by the types of metal ions that form complexes with chitosan. The complexation of chitosan with Cu(2+) or Fe(3+) ions strongly promoted the depolymerization rate of chitosan using a solution plasma treatment. However, chitosan-Ag(+) and chitosan-Zn(2+) complexes exhibited no change in the depolymerization rate compared to chitosan. After plasma treatment of the chitosan-metal complexes, the depolymerized chitosan products were separated into water-insoluble and water-soluble fractions. The water-soluble fraction containing low-molecular-weight chitosan was obtained in a yield of less than 57% for the depolymerization of chitosan-Fe(3+) complex with the plasma treatment time of 180 min.