Selective adsorption of Cr(VI) ions from aqueous solutions using a Cr(VI)-imprinted polymer supported by magnetic multiwall carbon nanotubes

Application Prospect of Ion-Imprinted Polymers in Harmless Treatment of Heavy Metal Wastewater

With the rapid development of industry, the discharge of heavy metal-containing wastewater poses a significant threat to aquatic and terrestrial environments as well as human health. This paper provides a brief introduction to the basic principles of ion-imprinted polymer preparation and focuses on the interaction between template ions and functional monomers. We summarized the current research status on typical heavy metal ions, such as Cu(II), Ni(II), Cd(II), Hg(II), Pb(II), and Cr(VI), as well as metalloid metal ions of the As and Sb classes. Furthermore, it discusses recent advances in multi-ion-imprinted polymers. Finally, the paper addresses the challenges faced by ion-imprinted technology and explores its prospects for application.

Magnetic Ion-Imprinted Materials for Selective Adsorption of Cr(VI): Adsorption Behavior and Mechanism Study

With the increase of hexavalent Cr(VI) wastewater discharged from industrial production, it seriously pollutes water bodies and poses a risk to human health. Adsorption is used as an effective means to treat Cr(VI), but its effectiveness is affected by pH, and the adsorption performance decreases when acidity is strong. Furthermore, research on the mechanism of Cr(VI) adsorption using DFT calculations needs to be developed. This study focuses on the development of magnetically responsive core-shell nano-ion imprinted materials (Fe3O4@GO@IIP) through magnetic separation and surface imprinting techniques. Characterization techniques including FT-IR, XRD, and EDS confirmed the core-shell nanostructure of Fe3O4@GO@IIP. Batch adsorption experiments and model simulations demonstrated the exceptional adsorption capacity of Fe3O4@GO@IIP for Cr(VI) in strongly acidic solutions (pH = 1), reaching a maximum of 89.18 mg/g. The adsorption mechanism was elucidated through XPS and DFT calculations, revealing that Fe3O4@GO@IIP operates through electrostatic interactions and chemical adsorption, with charge transfer dynamics quantified during the process. This research provides new insights for addressing Cr(VI) treatment in highly acidic environments.

Selective adsorption of Cr(VI) by nitrogen-doped hydrothermal carbon in binary system

Selective adsorption of heavy metal ions from industrial effluent is important for healthy ecosystem development. However, the selective adsorption of heavy metal pollutants by biochar using lignin as raw material is still a challenge. In this paper, the lignin carbon material (N-BLC) was synthesized by a one-step hydrothermal carbonization method using paper black liquor (BL) as raw material and triethylene diamine (TEDA) as nitrogen source. N-BLC (2:1) showed excellent selectivity for Cr(VI) in the binary system, and the adsorption amounts of Cr(VI) in the binary system were all greater than 150 mg/g, but the adsorption amounts of Ca(II), Mg(II), and Zn(II) were only 19.3, 25.5, and 6.3 mg/g, respectively. The separation factor (SF) for Cr(VI) adsorption was as high as 120.0. Meanwhile, FTIR, elemental analysis and XPS proved that the surface of N-BLC (2:1) contained many N- and O- containing groups which were favorable for the removal of Cr(VI). The adsorption of N-BLC (2:1) followed the Langmuir model and its maximum theoretical adsorption amount was 618.4 mg/g. After 5th recycling, the adsorption amount of Cr(VI) by N-BLC (2:1) decreased about 15%, showing a good regeneration ability. Therefore, N-BLC (2:1) is a highly efficient, selective and reusable Cr(VI) adsorbent with wide application prospects.

An ultralight and flexible nanofibrillated cellulose/chitosan aerogel for efficient chromium removal: Adsorption-reduction process and mechanism

Heavy metals in water are critical global environmental problems. In particular, the anionic heavy metal chromium (Cr) has carcinogenic and genotoxic risks on human health. To this end, an ultralight and flexible nanofibrillated cellulose (NFC)/chitosan (CS) aerogel was developed only by freeze-drying combined with physical thermal cross-linking for efficient one step co-removal of Cr(VI) and Cr(III). The maximum adsorption capacity of Cr(VI) and total Cr calculated according to the Langmuir model was 197.33 and 134.12 mg/g, respectively. Even in the presence of competing soluble organics, anions and oil contaminants, the resulting NFC/CS-5 aerogels showed excellent selectivity. The aerogel exhibited outstanding mechanical integrity, remaining intact after 17 compressions in air and underwater. Meanwhile, after 5 adsorption-desorption cycles, the aerogel was easy to regenerate and maintained a high regeneration efficiency of 80.25%. Importantly, self-assembled NFC/CS-5 aerogel filter connected with the peristaltic pump could purify 752 mL of industrial wastewater with Cr(VI) pre-concentration capacity of 49.71 mg/g. XPS and FT-IR verified that electrostatic interactions, reduction and complexation acted as the main driving forces for the adsorption process. Moreover, such aerogel possessed broad application prospects for alleviating heavy metal pollution in agriculture.

Preferential, synergistic sorption and reduction of Cr(VI) from chromium-rhodamine B mixed wastewater by magnetic porous biochar derived from wasted Myriophyllum aquaticum biomass

Eradication of heavy metals and dyes simultaneously from wastewater is urgently needed to safeguard public and environmental health. In this study, magnetic porous biochar derived from wasted Myriophyllum aquaticum (MPMaB) was synthesized by KOH-activation and co-precipitation method to treat chromate and rhodamine B (RhB)-bearing wastewater. The KOH activation significantly improved the pore structure of biochar with a high specific surface area of 937.1 m² g^-1. The sorption performance of MPMaB for Cr(VI) and RhB in single and co-solutes conditions was evaluated. In single system, a pH-dependent sorption pattern for Cr(VI) by MPMaB was revealed and the estimated sorption capability reached 175.4 mg g^-1, whereas the Langmuir-based sorption capacity of RhB was 175.4 mg g^-1 pH-independently. MPMaB partially transformed Cr(VI) to less toxic Cr(III) (approximately 59.3%). Synergistic sorption of Cr(VI) with the coexistence of RhB was observed, where synergistic effect ranged from 119% to 527% depending on pH. For example, the sorption capacity of Cr(VI) on MPMaB, at pH 2, augmented from 175.4 mg g^-1 (single system) to 208.3 mg g^-1 (binary system). Preferential sorption of Cr(VI) was found and was further confirmed by the post-sorption of Cr(VI) (or RhB) by MPMaB pre-sorbed with RhB (or chromate). Chromate sorption mechanisms mainly include electrostatic interactions and complexation, while the sorption of RhB is ascribed to π-π interactions, pore filling and hydrogen bonding. Additionally, MPMaB showed excellent reusability and maintained high removal efficiency after 5 cycles. In short, MPMaB can efficiently treat chromium and dyes-containing wastewater as sustainable and environmentally friendly adsorbent.

Construction of amino-thiol functionalized ion-imprinted chitosan for lead (II) ion removal

Ion-imprinting technique was used to create a lead ion-imprinted sorbent from an amino-thiol chitosan derivative (Pb-ATCS). First, 3-Nitro-4-sulfanylbenzoic acid (NSB) unit's amidized the chitosan, and then the -NO₂-residues were selectively reduced to -NH₂. Imprinting was accomplished by cross-linking with epichlorohydrin and removing the Pb (II) ions from the across-linked polymeric complex formed from the amino-thiol chitosan polymer ligand (ATCS) and Pb (II) ions. The synthetic steps have been investigated by nuclear magnetic resonance (NMR) and Fourier transform infrared spectroscopy (FTIR), and the sorbent was tested for its ability to selectively bind Pb (II) ions. The produced Pb-ATCS sorbent had a maximum capacity of roughly 300 mg/g, and it showed a greater affinity for the Pb (II) ions than the control NI-ATCS sorbent particle. The pseudo-2nd-order equation was also consistent with the adsorption kinetics of the sorbent, which were quite rapid. This demonstrated that metal ions were chemo-adsorbed onto the Pb-ATCS and NI-ATCS solid surfaces via coordination with the introduced amino-thiol moieties.

Cr(VI) anion-imprinted polymer synthesized on mesoporous silicon via synergistic action of bifunctional monomers for precise identification and separation of Cr(VI) from aqueous solution by fixed-bed adsorption

The novel Cr(VI) anion-imprinted polymer (Cr(VI)-IIP) was prepared by a surface imprinting technique with bifunctional monomers pre-assembly system based on mesoporous silicon (SBA-15). The synthesized Cr(VI)-IIP was characterized by Fourier transmission infrared spectra (FT-IR), energy dispersive spectrometer (EDS), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray powder diffractometer, N₂ adsorption-desorption and thermogravimetric analysis (TGA), proving to be with a highly ordered mesoporous structure, as well as favorable thermal stability. The saturated adsorption amount was 96.32 mg/g, which was 2.7 times higher than that of non-imprinted polymer (NIP). Kinetic experiments showed that the adsorption equilibrium state was obtained within 70 min. In addition, in the selectivity experiments, Cr(VI)-IIP exhibited strong specific recognition ability for Cr(VI) and could realize the separation of Cr(VI) and Cr(III) from an aqueous solution. The dynamic adsorption experiments exhibited that the dynamic adsorption efficiency of Cr(VI)-IIP was as high as 71.57%. Meanwhile, the dynamic regeneration experiments showed that the adsorption amount of Cr(VI)-IIP did not decrease significantly after repeating for five times. All of the findings suggested that Cr(VI)-IIP could achieve precise identification as well as efficient separation of Cr(VI) from aqueous solution.

A review on carbon-based molecularly-imprinted polymers (CBMIP) for detection of hazardous pollutants in aqueous solutions

This article discusses the unique properties and performance of carbon-based molecularly-imprinted polymers (MIPs) for detecting hazardous pollutants in aqueous solutions. Although MIPs have several advantages such as specific recognition sites, selectivity, and stability, they suffer from a series of drawbacks, including loss of conductivity, electrocatalytic activity, and cost, which limit their use in various fields. Carbon-based MIPs, which utilize carbon electrodes, carbon nanoparticles, carbon dots, carbon nanotubes, and graphene substrates, have been the focus of research in recent years to enhance their properties and remove their weaknesses as much as possible. These carbon-based nanomaterials have excellent sensitivity and specificity for molecular identification. As a result, they have been widely used in various applications, such as assessing the environmental, biological, and food samples. This article examines the growth of carbon-based MIPs and their environmental applications.

[Magnetic ion imprinting techniques for the separation and analysis of elemental speciation]

Metal and metalloid elements have various possible isotopic compositions and oxidation states and often form coordination or covalent compounds with inorganic and organic small molecules or biological macromolecules, resulting in complex elemental speciation. Different species of the same element often have different properties, which dictate their behavior. Thus, elemental speciation analysis is vital for comprehensively and accurately assessing an element's environmental and biological effects and the corresponding risks. Because elemental speciation determines the behavior of an element in different environmental and biological processes, the analysis of elemental species has, in recent years, been important in various subjects, including analytical chemistry, environmental chemistry, geochemistry, ecology, agronomy, and biomedicine. The complexity of environmental and biological sample matrices, as well as the multiformity, low levels, and lability of chemical forms pose severe challenges in elemental speciation analysis. Therefore, the highly selective identification and efficient separation of native species is necessary for conducting the identification, quantification, ecotoxicity evaluation, and physiological function study of elemental speciation. Sample pretreatment by solid-phase extraction is an effective solution to the aforementioned problems, but the existing methods do not meet the requirements of current research. The transition of the target species from pre-processing to the detection device includes both on- and off-line arrangements. Compared with the on-line approach, the off-line approach requires more manual participation, increasing the analysis workload. However, the off-line approach can improve the analysis efficiency through high-throughput pretreatment when large batches of samples are encountered, meaning the off-line approach is still an effective model. Ion imprinting technology has been developed based on existing molecular imprinting technology, with four main steps present in the synthesis of ion imprinted polymers. First, ion imprinting technology uses metal ions as templates. Then, these templates are combined with the functional monomers through coordination, electrostatic or hydrogen bonding. The functional monomers simultaneously surround and fix the templates, after which the cross-linkers and functional monomers polymerize to prepare ion-imprinted polymers with a specific structure and composition. Finally, the imprinted holes are created in the polymers by eluting the template ions. Therefore, the template molecules, functional monomers, and cross-linkers are three precursors necessary for synthesizing ion-imprinted polymers. These polymers can specifically bind to the imprinted metal ions with accuracy, sensitivity, and reliability. In recent years, they have been widely used in separating, enriching, analyzing, and detecting elemental species. During solid-phase extraction, the non-magnetic adsorbent materials dispersed in the sample solution need to be separated by centrifugation or filtration, which is time-consuming and laborious. Because an external magnetic field can be used for rapid magnetic solid-phase extraction, it has become a potential method for separating and enriching elemental species. This review systematically summarizes the latest progress in ion-imprinting technology, including its principle and the preparation methods of ion-imprinted polymers. The challenges faced by ion imprinting technology are analyzed in the context of the development of ion-imprinting magnetic solid-phase extraction in elemental speciation analysis. Finally, the direction of future development and the strategies of ion imprinting technology in elemental speciation analysis are proposed. It is important to exploit novel organic-inorganic hybrid polymerization-based multifunctional ion-imprinted magnetic nanocomposites for the magnetic solid-phase extraction and separation of elemental species. By establishing the pretreatment protocols with high recognition selectivity, strong separation ability, large adsorption capacity, and good speciation stability, we expect to achieve the research objectives of simultaneously separating and enriching the multiple-species of typical metal/metalloid elements in environmental and biological samples.

Carbide-derived carbon as an extraordinary material for the removal of chromium from an aqueous solution

In the present work, the adsorptive removal of chromium (Cr) from water by carbide-derived carbon (CDC) was investigated. The morphology and structure of the CDC were characterized by using FTIR, SEM, TEM, XRD, and N₂ adsorption-desorption measurements. The effect of adsorption parameters including contact time, initial Cr concentration, temperature, initial solution pH, and CDC dosage was examined on the removal of Cr ions. The kinetic analysis revealed that the experimental data on the removal of Cr ions on CDC is well correlated with the pseudo-second order kinetic model (with R² > 0.999), while the equilibrium data were fitted by the Redlich-Peterson isotherm model (with R² > 0.992). The Langmuir and Sips models were also in good compliance with the equilibrium data, indicating a monolayer coverage of Cr ions onto the CDC surface with some heterogeneous active adsorption sites. The CDC revealed a notable Langmuir adsorption capacity of 159.1 mg/g for Cr ions at pH 6 and room temperature. The thermodynamic analysis illustrated that the Cr ions elimination by CDC is a feasible adsorption process and endothermic in nature. After five adsorption/desorption cycles, less than 18% reduction in the adsorption capacity was obtained indicating the stability and reusability of the CDC. Moreover, the CDC demonstrated an excellent potential in removing the Cr ions from real brackish water. According to the adsorption data, both physical and chemical adsorption processes occurred, and the adsorption was mainly controlled by electrostatic interactions with a possible reduction of hexavalent Cr to trivalent Cr at acidic conditions.

Chromium toxicity and its remediation by using endophytic bacteria and nanomaterials: A review

Chromium (Cr) is a crucial element for all life forms. Various anthropogenic activities have been responsible for environmental contamination with Cr (VI) in recent years. For this review, articles were collected using electronic databases such as Web of Science, Pubmed, ProQuest, and Google Scholar as per the guidelines of PRISMA-2015, applying the Boolean search methods. Chromium can cause severe health complications in humans and animals and threatens the surrounding environment, with negative impacts on crop yield, development, and quality. Hence, monitoring Cr contamination is essential, and various remediation technologies have emerged in the past 50 years to reduce the amount of Cr in the environment. This review focuses on chromium exposure and the associated environmental health risks. We also reviewed sustainable remediation processes, with emphasis on nanoparticle and endophytic remediation processes.

Cyclic enrichment of chromium based on valence state transformation in metal-free photocatalytic reductive imprinted composite hydrogel

Cr (VI) exists in anion form and can be reduced to positive charged Cr (III) under certain conditions. Can positive charged Cr (III) be continually used for absorbing Cr (VI) to achieve cyclic accumulation of chromium? In this paper, an ion imprinting material for adsorption of Cr (VI) was prepared by dispersing polypyrrole (PPy) in a gelatin/chitosan (Gel/CS) hydrogel network, named Gel/CS/PPy. Based on the conversion of Cr (VI) to Cr (III), a cyclic enrichment process including adsorption-photoreduction-fixation-readsorption of Cr (VI) was established in Gel/CS/PPy hydrogel. The composition and structure of the Gel/CS/PPy were analyzed by scanning electron microscopy (SEM), Fourier transform-infrared spectroscopy (FT-IR), thermogravimetric (TGA), texture analyzer (Universal TA), zeta potential and ultraviolet-visible-near infrared spectra (UV-vis-NIR). The conversion of Cr (VI) and Cr (III) and its promoting effect on readsorption were verified by XPS. The results showed that Gel/CS/PPy has good adsorption capacity for Cr (VI) and excellent photocatalytic ability to reduce Cr (VI) to Cr (III). Cr (III)-loaded Gel/CS/PPy can be further used to adsorb Cr (VI) and showed good adsorption efficiency even after four cycles. The optimal operating condition for Cr (VI) adsorption is pH = 3; 2 g/L dose of Gel/CS/PPy; and the adsorption capacity of Cr (VI) was about 106.8 mg/g after six adsorption cycles. Since Gel/CS/PPy is composed of organic components, high purity chromium can be recovered by simple calcination method later. Therefore, the synthesized Gel/CS/PPy has great potential in the practical application of low concentration Cr (VI) treatment in water.

A systematic review on adsorptive removal of hexavalent chromium from aqueous solutions: Recent advances

The contamination of natural resources by hexavalent chromium (Cr(VI)) originating from natural and anthropogenic activities is a serious environmental concern. Although many articles on chromium remediation have been published, a comprehensive understanding of the mechanisms involved in remediation with different sorbents is not yet available. In this systematic review, the performance and applicability of several adsorptive materials for Cr(VI) removal from aqueous media are discussed, along with a detailed analysis of the mechanisms involved. Statistical analysis is applied to compare the efficacies of different adsorbents, while a similar approach is used to determine the effects of sorbent properties and experimental conditions on the adsorption capacity. A detailed analysis of the factors involved in fixed-bed column studies is also presented. A suitable desorption approach to the regeneration of the spent adsorbent and its adsorption performance in reuse is also examined. Among the different sorbents, nanoparticles and mineral-doped biochar were found to be the most effective sorbents, while the adsorption was higher at low pH (~4.0) than that at intermediate pH (6-8). Contrary to our expectation, adsorption was high for sorbents with low specific surface areas, suggesting that the adsorption of Cr(VI) is largely influenced by the chemical properties of the sorbents. The optimum adsorption in fixed-bed column systems is obtained at a lower Cr(VI) ion concentration, a lower influent flow rate, and a higher bed height. Since most of the studies reviewed herein were merely experimental and utilized ideal conditions with the presence of a single contaminant, i.e. Cr(VI) in water, further studies on adsorption dynamics with the presence of other interfering ions are suggested. This review is promising for the further development of Cr(VI) removal strategies and closes the research gaps pertaining to their challenges.

Preparation of magnetic molecularly imprinted polymer based on multiwalled carbon nanotubes for selective dispersive micro-solid phase extraction of fenitrothion followed by ion mobility spectrometry analysis

A novel molecularly imprinted polymer based on magnetic multi-walled carbon nanotubes was fabricated and applied for selective dispersive micro-solid phase extraction of fenitrothion prior its determination by ion mobility spectrometry. The composite was synthesized using magnetic multi-walled carbon nanotubes as the support. Methacrylic acid was used as the functional monomer, fenitrothion as the template, ethylene glycol dimethacrylate as the cross-linker and 2,2-azoisobutyronitrile as the initiator. The resultant polymer was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, Brunauer-Emmet-Teller analysis, thermogravimetric analysis and vibrating sample magnetometer techniques. Experimental factors affecting the extraction efficiency such as pH and amount of sorbent were evaluated. Under optimum experimental conditions, the developed method displayed the linear range of 5-220 μg L^-1 with a detection limit (LOD) of 1.3 μg L^-1 . The intra and inter-day relative standard deviations (RSD%) for determination of fenitrothion were 3.6 and 4.7% (n = 6), respectively. Ultimately, the proposed method was used to monitoring of trace amounts of fenitrothion in fruit,vegetable and water samples. This article is protected by copyright. All rights reserved.

Cr(VI)-imprinted polymer wrapped on urchin-like Bi2S3 for reduced photocorrosion and improved photoreduction of aqueous Cr(VI)

Just like other metal sulfides, the misfortune of photocorrosion and undesired photogenerated electron-hole recombination for Bi₂S₃ was inevitable. In this work, a viable route to reduce photocorrosion of Bi₂S₃ and improve photoreduction of aqueous Cr(VI) was developed via "dressed" a Cr(VI) imprinting polymer (Cr(VI)-IP) on urchin-like Bi₂S₃ (U-Bi₂S₃). Cr(VI)-IP wrapped on the three dimensional U-Bi₂S₃ was implemented by a bulk polymerization. The wrapped Cr(VI)-IP enabled to fast enrich and adsorb Cr(VI) on U-Bi₂S₃ leading to improve the photoreduced efficiency of photogenerated carriers and restrain the photogenerated electron-hole recombination. What's more, Cr(VI)-IP wrapped on U-Bi₂S₃ was just like an "armor" which could support the three dimensional construction of U-Bi₂S₃ from the structural collapse of photocorrosion and retard the direct contact of oxygen and H₂O from the surrounding media. As expected, the obtained U-Bi₂S₃@Cr(VI)-IP exhibited higher photostability, adsorption, photoreduction capacities towards the target Cr(VI) than the bare U-Bi₂S₃. The photocatalytic kinetic constant of U-Bi₂S₃@Cr(VI)-IP was 6 times higher than U-Bi₂S₃. After 3 times recycling uses, the morphology, crystal structure and chemical constitution of U-Bi₂S₃@Cr(VI)-IP were maintained. In addition, the removal efficiency of Cr(VI) by U-Bi₂S₃@Cr(VI)-IP was kept at 58% whereas U-Bi₂S₃ was almost lost to zero.

Chromium contamination and effect on environmental health and its remediation: A sustainable approaches

Chromium (Cr) is a trace element critical to human health and well-being. In the last few decades, its contamination, especially hexavalent chromium [Cr(VI)] form in both terrestrial and aquatic ecosystems, has amplified as a result of various anthropogenic activities. Chromium pollution is a significant environmental threat, severely impacting our environment and natural resources, especially water and soil. Excessive exposure could lead to higher levels of accumulation in human and animal tissues, leading to toxic and detrimental health effects. Several studies have shown that chromium is a toxic element that negatively affects plant metabolic activities, hampering crop growth and yield and reducing vegetable and grain quality. Thus, it must be monitored in water, soil, and crop production system. Various useful and practical remediation technologies have been emerging in regulating chromium in water, soil, and other resources. A sustainable remediation approach must be adopted to balance the environment and nature.

Determination of cesium ions in environmental water samples with a magnetic multi-walled carbon nanotube imprinted potentiometric sensor

A potentiometric sensor, based on the glassy carbon electrode (GCE) modified with a magnetic multi-walled carbon nanotubes/cesium ion-imprinted polymer composite (MMWCNTs@Cs-IIP), is introduced for the detection of cesium(i). The IIP was synthesized using cesium ions as the template ions, chitosan as the functional monomer and glutaraldehyde as the cross-linking agent. The membrane, which was coated on the surface of the GCE, was prepared using MMWCNTs@Cs(i)-IIP as the modifier, PVC as the neutral carrier, 2-nitrophenyloctyl ether as the plasticizer and sodium tetraphenylborate as the lipophilic salt. The proposed sensor exhibited a Nernstian slope of 0.05954 V dec⁻¹ in a working concentration range of 1 × 10⁻⁷ to 1 × 10⁻⁴ M (mol L⁻¹) with a detection limit of 4 × 10⁻⁸ M. The sensor exhibited high selectivity for cesium ions and was successfully applied for the determination of Cs(i) in real samples.

A Cs(i)-selective potentiometric microsensor based on the glassy carbon electrode (GCE) modified with a magnetic multi-walled carbon nanotubes/cesium ion-imprinted polymer has been developed.

Adsorption characteristics of magnetic nanoparticles coated mixed fungal biomass for toxic Cr(VI) ions in aquatic environment

In this research, the adsorptive removal of Cr(VI) ions from the aquatic environment have been studied using newly synthesized magnetic nanoparticles coated mixed fungal biomass (MNP-FB). Two fungal biomass such as Aspergillus fumigatus and Aspergillus niger were isolated, screened, and utilized as a precursor for making an adsorbent. Molecular characterization of isolated fungal species was recognized using 18S rRNA sequencing. The characterization studies of the MNP-FB were evaluated using Fourier Transform Infrared Spectrophotometer (FTIR) and Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) analyses. Optimization studies were studied to check the effect of different operating variables such as pH (2.0-9.0), equilibrium time (10-90 min), MNP-FB dosage (0.1-1.0 g/L), temperature (30-60 °C) and concentration of Cr(VI) ions (50-500 mg/L). Additionally, Freundlich isotherm model fits well for the adsorption of Cr(VI) ion using MNP-FB. The adsorption kinetics was interpreted well by Pseudo-first order model. The thermodynamic study concluded that Cr(VI) ions removal by MNP-FB was exothermic and appreciative at low temperatures. The monolayer adsorption efficiency of MNP-FB for Cr(VI) ions was measured as 249.9 mg/g. The current results reveal that MNP-FB has considered being a proficient and economically suitable material for the Cr(VI) ions removal from the water environment.

Prepared PANI@nano hollow carbon sphere adsorbents with lappaceum shell like structure for high efficiency removal of hexavalent chromium

Herein, the novel polyaniline@nano hollow carbon sphere (PANI@NHCS) adsorbents with different mass of NHCS were prepared by in-situ polymerization method. The microstructure of obtained PANI@NHCS-10, PANI@NHCS-20, PANI@NHCS-30 and PANI@NHCS-40 samples were observed through both scanning electron microscopy (SEM) and transmission electron microscopy (TEM), which showed that the PANI@NHCS-30 possessed hollow structure like lappaceum shell. Then, the performance of obtained PANI@NHCS-30 was studied for removing hexavalent chromium (Cr(VI)) from waste water. With the help of unique hollow structure and reduction ability of PANI@NHCS-30, the Cr(VI) was fleetly adsorbed and then reduced to less toxic Cr(III). The maximum adsorption capacity was 250.0 mg/g for PANI@NHCS-30 under the optimal condition. Moreover, the effects of initial Cr(VI) concentration, solution pH and different ions on the adsorption performance were investigated in detail. Importantly, the PANI@NHCS-30 still shows superb adsorption ability after five cycles, which suggests its satisfactory reusability ability. The accumulated data revealed the crucial role of PANI and hollow structure co-promoting effect on Cr(VI) reduction reactions over PANI@NHCS-30, which could be applied to the practical use.

Ion-imprinted modified molecular sieves show the efficient selective adsorption of chromium(vi) from aqueous solutions

Molecular sieve 5A was modified with (3-aminopropyl) triethoxysilane (APTES) as the support matrix, on which 4-VP was used as the ionic imprinting group. The as-prepared IIZMS-APTES was applied as the adsorbent for the recovery of chromium(vi) from aqueous solutions. The adsorbent was characterized via Fourier transform infrared spectroscopy (FT-IR), scanning electronic microscopy (SEM), and X-ray diffraction (XRD). The influences of adsorption time, concentration of the ions, initial pH, and temperature on the adsorption performance to Cr(vi) were investigated. The selectivity and reusability of IIZMS-APTES are also evaluated. The results showed that the maximum adsorption capacity reached 56.46 mg g-1 when the initial concentration of metal ions was at 100 mg L-1 at pH 2 and 30 °C. The adsorption process followed the pseudo-second-order kinetic model and Langmuir adsorption isotherm model. The IIZMS-APTES exhibits an efficient selective adsorption of Cr(vi) from aqueous solutions.

Efficient Removal of Cr(VI) Ions by a Novel Magnetic 4-Vinyl Pyridine Grafted Ni3Si2O5(OH)4 Multiwalled Nanotube

The contamination of water systems by heavy metals greatly threatens human health and ecological safety. An efficient adsorbent is critical for the removal of these contaminants. In this work, magnetic Ni3Si2O5(OH)4 nanotubes (NTs) have been synthesized via in situ hydrothermal reduction and further functionalized by grafting poly(4-vinyl pyridine) (P4VP) brushes on its surface via atom transfer radical polymerization. Characterizations by Fourier transform infrared, X-ray diffraction, thermogravimetric analysis, transmission electron microscopy, and X-ray photoelectron spectroscopy proved that P4VP was successfully grafted on the surface of magnetic Ni3Si2O5(OH)4 NTs. The resultant Ni3Si2O5(OH)4-g-P4VP NTs are efficient nanosorbents for removing Cr(VI) anions from water. The Cr(VI) adsorption capacity of Ni3Si2O5(OH)4-g-P4VP NTs reaches 1.49 mmol/g at a pH of 3. The pseudo-second-order kinetic model and the Freundlich isothermal model are suitable to describe the adsorption process. The analysis using Weber-Morris and Boyd models indicates that both intraparticle diffusion and external film diffusion affect the Cr(VI) adsorption process. The adsorption enthalpy is estimated to be 18.37 kJ/mol. More than 90% of the Cr(VI) adsorption capacity of the Ni3Si2O5(OH)4-g-P4VP NTs remains after eight adsorption and desorption cycles.

Removal of Cr(VI) from Aqueous Solution by Polypyrrole/Hollow Mesoporous Silica Particles

The removal of Cr(VI) in wastewater plays an important role in human health and environment. In this work, polypyrrole/hollow mesoporous silica particle (PPy/HMSNs) adsorbents have been newly synthesized by in-situ polymerization, which prevent the aggregation of pyrrole in the process of polymerization and exhibit highly selective and powerful adsorption ability for Cr(VI). The adsorption process was in good agreement with the quasi-second-order kinetic model and the Langmuir isotherm model. And the maximum adsorption capacity of Cr(VI) was 322 mg/g at 25 °C. Moreover, the removal rate of Cr(VI) by PPy/HMSNs was ~100% in a number of binary systems, such as Cl⁻/Cr(VI), NO₃⁻/Cr(VI), SO₄²⁻/Cr(VI), Zn²⁺/Cr(VI), Fe³⁺/Cr(VI), Sn⁴⁺/Cr(VI), and Cu²⁺/Cr(VI). Thus, the PPy/HMSNs adsorbents have great potential for the removal of Cr(VI) in wastewater.

Preparation of highly efficient ion-imprinted polymers with Fe3O4 nanoparticles as carrier for removal of Cr(VI) from aqueous solution

Fe₃O₄ magnetic nanoparticles were prepared by hydrothermal synthesis and their surface was modified by the sol-gel method. Polymers imprinted with magnetic Cr (VI) were prepared by using Cr₂O₇^2- as template ion, 4-vinyl pyridine (4-VP) as monomer, isopropanol as solvent and Fe₃O₄ as matrix. The effects of solvent type, amount of Cr (VI) addition and volume of crosslinking agent on the adsorption properties of the imprinted polymers were investigated. The polymers were characterized by Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA). The adsorption equilibrium was reached within 50 min, and the maximum adsorption capacity was 201.55 mg·g^-1. The adsorption process conformed to the Langmuir model, and the results of kinetic fitting showed that the pseudo-first-order kinetic model applied. In the Cr₂O₇^2-/AlF₄^- and Cr₂O₇^2-/CrO₄^2- competitive systems, the imprinted polymer showed good selectivity to the template ions, with relative selectivity factors of 6.91 and 5.99, respectively. When the imprinted polymer was reused 6 times, the adsorption capacity decreased by only 8.2%, demonstrating good reusability.

Recent advances in hexavalent chromium removal from aqueous solutions by adsorptive methods

Chromium exists mainly in two forms in environmental matrices, namely, the hexavalent (Cr(vi)) and trivalent (Cr(iii)) chromium. While Cr(iii) is a micronutrient, Cr(vi) is a known carcinogen, and that warrants removal from environmental samples. Amongst the removal techniques reported in the literature, adsorption methods are viewed as superior to other methods because they use less chemicals; consequently, they are less toxic and easy to handle. Mitigation of chromium using adsorption methods has been achieved by exploiting the physical, chemical, and biological properties of Cr(vi) due to its dissolution tendencies in aqueous solutions. Many adsorbents, including synthetic polymers, activated carbons, biomass, graphene oxide, and nanoparticles as well as bioremediation, have been successfully applied in Cr(vi) remediation. Initially, adsorbents were used singly in their natural form, but recent literature shows that more composite materials are generated and applied. This review focused on the recent advances, insights, and project future directions for these adsorbents as well as compare and contrast the performances achieved by the mentioned adsorbents and their variants.

Preparation of a novel magnetic Pd(II) ion-imprinted polymer for the fast and selective adsorption of palladium ions from aqueous solutions

A novel magnetic ion-imprinted polymer with high accessibility to palladium ions was synthesized via co-precipitation polymerization. Accordingly, a ternary complex composed of PdCl₂ as an imprinting ion, 8-aminoquinoline (AQ) as a ligand, and 4-vinyl pyridine (4-VP) as a complexing monomer was applied to Fe₃O₄@SiO₂ as magnetic core, followed by precipitation polymerization using 2-hydroxyethyl methacrylate (2-HEMA) as a co-monomer, ethylene glycol dimethacrylate (EGDMA) as the crosslinker, and 2,2-azobisisobutyronitrile (AIBN) as an initiator in the presence of 2-methoxyethanol as a solvent. The palladium ions were leached out by a solution containing 50% (v/v) HCl. The synthesized polymer was characterized physically and morphologically using different techniques. In order to assess the conditions required for adsorption, as well as the selectivity and reusability, batch adsorption experiments were carried out. The experiments exhibited that the maximum adsorption capacity was about 65.75 mg g^-1 at 25 °C, while the pH solution and the adsorbent dose were 4 and 1 g L^-1, respectively. Kinetic studies of experimental data demonstrated that they correspond very much to the pseudo-second-order kinetic model. The development of the Langmuir and Freundlich isothermal models on the equilibrium data proved to correspond well to the Langmuir isotherm model. Interferences studies of the magnetic polymer demonstrated higher affinity and discernment for palladium ions than other co-existing ions in the solutions. Spontaneous (ΔG < 0) and exothermic (ΔH < 0) behavior of the adsorption process is confirmed by thermodynamic studies. In addition, the affinity of the spent polymer has not been dramatically reduced over at least five regeneration cycles.

Water compatible imprinted polymer prepared in water for selective solid phase extraction and determination of ciprofloxacin in real samples

A novel water compatible ciprofloxacin imprinted polymer is synthesized in water via a green, non-toxic and environmentally friendly polymerization process. Hydrophilic groups, including anionic chlorine, hydroxyl, and carbonyl oxygen provided by a bifunctional monomer comprising 1-allyl-3-vinylimidazole chloride and 2-hydroxyethyl methacrylate, are introduced into the imprinted material, which allows the polymer to interact strongly with imprinting molecule via hydrogen bonds, electrostatic and π-π dipole interactions in aqueous solution. Rebinding experiments show that the obtained molecularly imprinted polymer (MIP) presents special molecular recognition towards quinolone antibiotics (ciprofloxacin, levofloxacin and pefloxacin mesylate) in aqueous matrices. The adsorption process of ciprofloxacin on MIP and non-imprinted polymer (NIP) substrates involves spontaneous exothermic reactions, and the maximum rebinding capacities of ciprofloxacin on MIP and NIP at 25 °C are 19.96 and 8.86 mg g^-1, respectively. The excellent selectivity and hydrophilicity of this imprinted polymer makes it suitable for use as an adsorbent in solid phase extraction. Under the optimized conditions, the presented MIP-SPE protocol exhibits a wide linear range between 0.29 and 1.47 × 10⁵ μg L^-1 and has been successfully applied for the separation and enrichment of trace ciprofloxacin in real water, soil and pork samples with satisfactory recoveries of 87.33-102.50%. The proposed study implies the promising prospect of this green and water compatible MIP in highly effective recognition and separation of trace quinolones in complex matrics.

A biomimetic SiO2@chitosan composite as highly-efficient adsorbent for removing heavy metal ions in drinking water

Highly efficient adsorbents for drinking water purification are demanded since the contaminants are generally in a low concentration which makes it difficult for conventional adsorbents. Herein, we present a novel biomimetic SiO₂@chitosan composite as adsorbent with a high adsorption capability towards heavy metal ions including As(V) and Hg(II). The hollow leaf-like SiO₂ scaffold within the adsorbent has a stable chemical property; while on the surface SiO₂, the chitosan nanoparticle provide a large amount of active sites such as amino and hydroxyl groups for adsorbing heavy metal ions. The special SiO₂ structure also prevents the agglomeration and loss of chitosan, which enables the efficient contact between the functional groups of chitosan and heavy metal ions. The SiO₂@chitosan composite exhibits maximum adsorption capacities of 204.1 and 198.6 mg g^-1 towards Hg(II) and As(V), respectively. In addition, the removal efficiency reaches over 60% within 2 min. The adsorption performance enables the presented biomimetic adsorbent suitable for adsorbing low-concentration heavy metal ions, especially possessing a promising potential for drinking water purification.

Fabrication of Composite Beads Based on Calcium Alginate and Tetraethylenepentamine-Functionalized MIL-101 for Adsorption of Pb(II) from Aqueous Solutions

In this work, a tetraethylenepentamine (TEPA)-grafted metal-organic framework material (MIL-101) was synthesized. The introduction of TEPA increased the abundance of functional groups on the MIL-101. As a powdery adsorbent, MIL-101-TEPA can be difficult to separate. In order to solve this problem, we combined MIL-101-TEPA with sodium alginate (SA) and injected the mixture into a CaCl₂ solution to solidify the powder into beads with a particle size of 3 mm. The easily recovered adsorbent was applied to the adsorption of Pb(II) from water. The structure and characterization of the adsorbent were investigated through scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). We also optimized the adsorption conditions. The results of the study showed that the adsorption process was chemisorptive and endothermic in nature. The maximum adsorption capacity of the composite beads was 558.6 mg/g. Meanwhile MIL-101-TEPA@CA showed good repeatable utilization.