Effect of redox mediators in pharmaceuticals degradation by laccase: A comparative study

Exploring the environmental pathways and challenges of fluoroquinolone antibiotics: A state-of-the-art review

Fluoroquinolone (FQ) antibiotics have become a subject of growing concern due to their increasing presence in the environment, particularly in the soil and groundwater. This review provides a comprehensive examination of the attributes, prevalence, ecotoxicity, and remediation approaches associated with FQs in environmental matrices. The paper discusses the physicochemical properties that influence the fate and transport of FQs in soil and groundwater, exploring the factors contributing to their prevalence in these environments. Furthermore, the ecotoxicological implications of FQ contamination in soil and aquatic ecosystems are reviewed, shedding light on the potential risks to environmental and human health. The latter part of the review is dedicated to an extensive analysis of remediation approaches, encompassing both in-situ and ex-situ methods employed to mitigate FQ contamination. The critical evaluation of these remediation strategies provides insights into their efficacy, limitations, and environmental implications. In this investigation, a correlation between FQ antibiotics and climate change is established, underlining its significance in addressing the Sustainable Development Goals (SDGs). The study further identifies and delineates multiple research gaps, proposing them as key areas for future investigational directions. Overall, this review aims to consolidate current knowledge on FQs in soil and groundwater, offering a valuable resource for researchers, policymakers, and practitioners engaged in environmental management and public health.

Optimized decolorization of two poly azo dyes Sirius Red and Sirius Blue using laccase-mediator system

Factors, namely pH, laccase-like activity, dyes concentration as well as 1-Hydroxybenzotriazole (HBT) concentration was examined. The results indicated that the maximum decolorization yield and rate reached 98.30 ± 0.10% and 5.84 ± 0.01%/min, respectively for Sirius Blue, and 99.34 ± 0.47% and 5.85 ± 0.12%/min, respectively for Sirius Red after 4 h. The presence of the redox mediator 1-hydroxybenzotriazole (HBT) greatly improved the decolorization levels. The optimum concentrations of HBT, dyes, and laccase were 0.62 mM, 50 mg/L, and 0.89 U/mL respectively at pH 4.58 for both dyes. Phytotoxicity tests using treated and untreated dyes proved that the applied treatment slightly decreased the toxicity of the by-products. However, the germination index (GI) increased from 14.6 to 36.08% and from 31.6 to 36.96% for Sirius Red and Sirius Blue, respectively. The present study focused on the treatment of two recalcitrant azo dyes, namely: Sirius Blue (Direct Blue 71) and Sirius Red (Direct Red 80). The decolorization was performed using cell-free supernatant from Coriolopsis gallica culture with high laccase activity. Response surface methodology (RSM) and Box-Behnken design were applied to optimize the decolorization of the two tested dyes. The effect of four.

Enhanced chlorination of diclofenac using ABTS as electron shuttle: Performance, mechanism and applicability

Chlorination, one of the most common oxidation strategies, performed limited degradation capacity towards many emerging organic contaminants under neutral pH conditions. In this study, 2,2'-azinobis(3-ethylbenzothiazoline)-6-sulfonate (ABTS) was discovered to possess an outstanding activation property towards free available chlorine (FAC) during the chlorination of diclofenac (DCF) among pH 6.0-9.5. ABTS radical (ABTS•+) primarily accounted for the elimination of DCF in the ABTS/FAC system, although hydroxyl radicals, reactive chlorine species, and singlet oxygen were also generated via the self-decomposition of FAC. ABTS acted as the electron shuttle to degrade DCF in the ABTS/FAC system, where ABTS was firstly oxidized by FAC to ABTS•+ via single electron transfer, and followed by the elimination of DCF with the generated ABTS•+. Eight DCF degradation intermediates were identified by LC/Q-TOF/MS, and four DCF degradation pathways were proposed. Real water bodies, humic acid, and the coexistent anions of Cl-, HCO3-, NO3-, and SO42- performed negligible influence on DCF removal in ABTS/FAC system. ABTS/FAC system was much superior to sole chlorination in terms of toxicity reduction and anti-interference capacity. Overall, this study innovatively introduced ABTS as the electron shuttle to enhance the oxidative capacity of FAC under neutral pH conditions and provided a new insight that the ABTS-like organic/synthetic components might play an important role in degrading emerging organic contaminants by chlorination in water treatment.

Magnetically separable laccase-biochar composite enable highly efficient adsorption-degradation of quinolone antibiotics: Immobilization, removal performance and mechanisms

The tremendous potential of hybrid technologies for the elimination of quinolone antibiotics has recently attracted considerable attention. This current work prepared a magnetically modified biochar (MBC) immobilized laccase product named LC-MBC through response surface methodology (RSM), and LC-MBC showed an excellent capacity in the removal of norfloxacin (NOR), enrofloxacin (ENR) and moxifloxacin (MFX) from aqueous solution. The superior pH, thermal, storage and operational stability demonstrated by LC-MBC revealed its potential for sustainable application. The removal efficiencies of LC-MBC in the presence of 1 mM 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) for NOR, ENR and MFX were 93.7 %, 65.4 % and 77.0 % at pH 4 and 40 °C after 48 h reaction, respectively, which were 1.2, 1.3 and 1.3 times higher than those of MBC under the same conditions. The synergistic effect of adsorption by MBC and degradation by laccase dominated the removal of quinolone antibiotics by LC-MBC. Pore-filling, electrostatic, hydrophobic, π-π interactions, surface complexation and hydrogen bonding contributed in the adsorption process. The attacks on the quinolone core and piperazine moiety were involved in the degradation process. This study underscored the possibility of immobilization of laccase on biochar for enhanced remediation of quinolone antibiotics-contaminated wastewater. The proposed physical adsorption-biodegradation system (LC-MBC-ABTS) provided a novel perspective for the efficient and sustainable removal of antibiotics in actual wastewater through combined multi-methods.

Elimination of tetracyclines in seawater by laccase-mediator system

Long-term exposure of antibiotics at low level leads to the accumulation of antibiotics in environmental media and organisms, inducing the formation of antibiotic resistance genes. Seawater is an important sink for many contaminants. Here, laccase from Aspergillus sp. And mediators that follow different oxidation mechanisms were combined to degrade tetracyclines (TCs) at environmentally relevant levels (ng·L^-1-μg·L^-1) in coastal seawater. The high salinity and alkaline of seawater changed the enzymatic structure of laccase, resulting in a reduced affinity of laccase to the substrate in seawater (K_m of 0.0556 mmol L^-1) than that in buffer (K_m of 0.0181 mmol L^-1). Although the stability and activity of the laccase decreased in seawater, laccase at a concentration of 200 U·L^-1 with a laccase/syringaldehyde (SA) ratio of 1 U: 1 μmol could completely degrade TCs in seawater at initial concentrations of less than 2 μg L^-1 in 2 h. Molecular docking simulation showed that the interaction between TCs and laccase mainly includes hydrogen bond interaction and hydrophobic interaction. TCs were degraded into small molecular products through a series of reactions: demethylation, deamination, deamidation, dehydration, hydroxylation, oxidation, and ring-opening. Prediction of the toxicity of intermediates showed that the majority of TCs can be degraded into low-toxic or non-toxic, small-molecule products within 1 h, indicating that the degradation process of TCs by a laccase-SA system has good ecological safety. The successful removal of TCs by the laccase-SA system demonstrates its potential for the elimination of pollutants in marine environment.

Removal of pentachlorophenol and phenanthrene from lignocellulosic biorefinery wastewater by a biocatalytic/biosurfactant system comprising cross-linked laccase aggregates and rhamnolipid

Synthesis and characterization of highly active cross-linked laccase aggregates (CLLAs) were performed and evaluated for removal of pentachlorophenol and phenanthrene from lignocellulosic biorefinery wastewater. Laccase from Tramates versicolor MTCC 138 was insolubilized as CLLAs via precipitation with 70% ammonium sulphate and simultaneous cross-linking with 5 mM glutaraldehyde to obtain activity recovery of 89.1%. Compared to the free laccase, the pH and thermal stability of the prepared CLLAs were significantly higher. At a high temperature of 60 °C, free laccase had a half-life of 0.25 h, while CLLAs had a half-life of 6.2 h. In biorefinery wastewater (pH 7.0), the free and CLLAs were stored for 3 day at a temperature of 30 °C. Free laccase completely lost their initial activity after 60 h; however, the CLLAs retained 39% activity till 72 h. Due to its excellent stability, free laccase and CLLAs were assessed for removing pentachlorophenol and phenanthrene in wastewater. CLLAs could remove 51-58% of pentachlorophenol (PCP) and phenanthrene (PHE) in 24 h. Biosurfactants, including surfactin, sophorolipid, and rhamnolipid, were assessed for their aptitude to improve the removal of organic contaminants in wastewater. Biorefinery wastewater incubated with all surfactants enhanced PCP and PHE removal compared to the no-surfactant controls. Further, 1 μM rhamnolipid significantly amplified pentachlorophenol and phenanthrene removal to 81-93% for free laccase and CLLAs, respectively.

Synthesis of magnetically recyclable porous cross-linked aggregates of Tramates versicolor MTCC 138 laccase for the efficient removal of pentachlorophenol from aqueous solution

The primary objective of this study is to synthesize the magnetically separable highly active porous immobilized laccase for the removal of pentachlorophenol (PCP) in an aqueous solution. Magnetic porous cross-linked enzyme aggregates (Mp-CLEAs) of laccase were synthesized using 1% starch solution with 5 mM glutaraldehyde followed by 10 h of cross-linking time with an activity recovery of 90.85 ± 0.2%. The biocatalytic efficiency of magnetic porous CLEAs (Mp-CLEAs) was 2-fold higher than that of magnetic CLEAs. The synthesized Mp-CLEAs were mechanically stable with enhanced catalytic efficiency, and reusability thus overcoming the mass transfer limitations and enzyme loss. At 40 °C, the thermal stability of the magnetic porous immobilized laccase was improved, with a 602 min half-life compared to 207 min half-life for the free enzyme. Using 40 U/mL of laccase for the removal of 100 ppm of PCP, M-CLEAs, and Mp-CLEAs removed 60.44% and 65.53% of PCP, respectively. Furthermore, to enhance PCP removal, a laccase-aided system was harnessed by optimizing various surfactants and mediators. Of these, 0.1 mM of rhamnolipid and 2,3 dimethoxy phenol had the highest PCP removal rates of 95.12% and 99.41%, respectively, for Mp-CLEAs. This study demonstrates the efficacy of the laccase-surfactant-mediator system for the removal of PCP from the aqueous solution, which can also be proposed for real-time application.

Hierarchically-structured laccase@Ni3(PO4)2 hybrid nanoflowers for antibiotic degradation: Application in real wastewater effluent and toxicity evaluation

Laccase@Ni₃(PO₄)₂ hybrid nanoflowers (HNFs) were prepared by the anisotropic growth of biomineralized nickel phosphate. The immobilization yield was 77.5 ± 3.6 %, and the immobilized enzyme retained 50 % of its initial activity after 18 reusability cycles. The immobilized and free enzymes lost 80 % of their activity after 18 and 6 h incubation in municipal wastewater effluent (MWWE), respectively. The increase in α-helix content (8 %) following immobilization led to a more rigid enzyme structure, potentially contributing to its improved stability. The removal of ciprofloxacin from MWWE by laccase@Ni₃(PO₄)₂·HNFs/p-coumaric acid oxidation system was optimized using a Box-Behnken design. Under the optimized conditions [initial laccase activity (0.05 U mL^-1), the concentration of p-coumaric acid (2.9 mM), and treatment time (4.9 h)], the biocatalyst removed 90 % of ciprofloxacin (10 mg L^-1) from MWWE. The toxicity of ciprofloxacin against some G⁺ and G^- bacteria was reduced by 35-70 %, depending on their strain. The EC₅₀ of ciprofloxacin for the alga Raphidocelis subcapitata reduced from 3.08 to 1.07 mg L^-1 (p-value <0.05) after the bioremoval. Also, the acute and chronic toxicity of identified biodegradation products was lower than ciprofloxacin at three trophic levels, as predicted by ECOSAR software.

Optimization of laccase enzyme extraction from spent mushroom waste of Pleurotus florida through ANN-PSO modeling: An ecofriendly and economical approach

The cardinal focus of this study is to optimize the best reaction conditions for maximizing laccase activity from spent mushroom waste (SMW) of Pleurotus florida. Optimization process parameters were studied by the modeling techniques, artificial neural networking (ANN) embedded in particle swarm optimization (PSO), and response surface model (RSM). The best topology of ANN-PSO architecture was obtained on 4-10-1. The R², IOA, MSE, and MAE values of the ANN model were obtained as 0.98785, 0.9939, 0.0023, and 0.0251 while, that of the RSM model were obtained as 0.74290, 0.9210, 0.0244, and 0.1110 respectively. The higher values of R², IOA, and lower values of MSE and MAE of the ANN-PSO model depict that ANN-PSO outperformed compared to RSM and also verified the effectiveness of the ANN-PSO model. The ANN-PSO model performance demonstrates the robustness of the technique in optimizing laccase activity in SMW of P. florida. The optimization results revealed that pH 4.5, time 3 h, solid: solution ratio 1:5, and ABTS concentration of 1 mM was optimal for achieving maximum laccase activity at temperature 30 °C. The enzymatic activity of crude laccase enzyme was obtained as 1.185 U ml^-1 without loss of enzyme activity. Additionally, crude laccase enzyme was 1.74 fold partially purified, and 83.54% of the enzyme was yielded. Out of all the independent process variables, ABTS and pH had an influence on laccase activity. Therefore, we anticipate that the findings of this investigation will reduce the ambiguity in maximizing laccase activity and ease the screening process. This study also highlights the comparative cost evaluation of crude laccase enzyme extracted from P. florida and commercial enzymes. There is a great potential for the utilization of the laccase enzyme extracted from SMW and using it for the degradation of recalcitrant micropollutants. Thus, SMW promises a cost-effective and sustainable approach leading towards circular economy.

Mechanism of norfloxacin transformation by horseradish peroxidase and various redox mediated by humic acid and microplastics

The catalysis of HRP coupling with redox mediator was a feasible technology for the transformation of antibiotics. This work screened three effective redox mediators syringaldehyde (SYR), acetosyringone (AS) and p-coumaric acid (PCA) for the norfloxacin (NOR) transformation in HRP/redox mediator system. Then, compared their transformation characteristics under varying conditions. The molecular docking results indicated HRP catalytic mediator was spontaneous, and the absolute value order of free energy between three redox mediators and HRP was consistent with the order of NOR removal in experiment. The presence of humic acid (HA) and polystyrene (PS) microplastics could block the removal of NOR, and the inhibition effect was proportional to the level of HA and PS particles. Seven and six possible intermediate products were identified by using SYR/AS and PCA as redox mediators, respectively, and potential NOR transformation pathways were proposed. SYR and AS treatment had the same transformation products and pathways due to their similar structure, including defluorination, oxidation, cross-coupled with mediator, demethylation and dehydrogenation. While for the PCA group, NOR not only performed the above action (except defluorination), but also underwent decarbonylation. These findings may expand our knowledge of the conversion and fate of fluoroquinolones through HRP coupled with redox mediator in the environment.

Zeolitic imidazolate frameworks as effective crystalline supports for aspergillus-based laccase immobilization for the biocatalytic degradation of carbamazepine

In this study, zeolitic imidazolate frameworks (ZIF) were employed as effective porous supports for laccase enzyme attachment and further explored synergistic adsorption and biocatalytic degradation of carbamazepine (CBZ) in aqueous solutions. Characterization results from FTIR and NMR analysis confirmed successful incorporation of the laccase enzyme onto ZIF particles. Further analyses from SEM and TEM revealed rhombic dodecahedral morphologies of ZIF crystals with crusts of the enzyme observed on the particles' surface. The carbamazepine degradation results showed that immobilization of the laccase improved its stability and resistance at various pH's, in comparison to the free enzyme. The immobilized laccase also exhibited relatively higher activities across the studied temperature range compared to the free form. Kinetic studies revealed a negligible decline in velocity, Vmax after immobilization, evaluated to be 0.873 and 0.692 mg L-1 h-1 for the free and immobilized laccase, respectively. The immobilized laccase demonstrated improved stabilities towards organic solvents, which qualifies the composite's application in real wastewater samples. In which case, the laccase-ZIF composite proved effective in CBZ decontamination with an efficiency of ∼92%. Furthermore, the immobilized laccase exhibited appreciable storage stabilities (∼70% residual activity) for up to 15 days before any significant loss in activity.

Degradation of endocrine-disrupting chemicals in wastewater by new thermophilic fungal isolates and their laccases

Thermophilic fungi are known to develop different metabolic and catabolic activities that enable them to function at elevated temperatures. Screening heat-resistant fungi, as promising resources for enzymatic activities, are still recommended. A total of eleven wood-decay thermophilic fungal strains were isolated from decaying organic materials (DOM) collected from arid areas of Khulais (Saudi Arabia). Six of these isolates are laccase-producing thermophilic strains growing at 50 °C. Among Laccase positive (Lac+) isolates, Chaetomium brasiliense (G3), Canariomyces notabilis (KW1), and Paecilomyces formosus (KW3) were exploited to treat single selected endocrine-disrupting chemicals (EDCs) that belonged to different classes (synthetic steroid hormone: 17α-ethinyl estradiol (EE2), and alkylphenols:4-tert-butylphenol (4-t-BP)). Chaetomium sp. was selected due to its potentialities against target EDCs, and then, their laccases were extracted and exploited for the biocatalytic degradation of treated municipal sewage wastewaters (TMWW) mixed with 4-t-BP and EE2. The results show that within 2 h of catalyzing at 50 °C, laccase could degrade 60 ± 4.8% of 4-t-BP; however, it oxidized EE2 less efficiently, reaching 35 ± 4.1%. The influence of some redox mediators on the laccase oxidation system was investigated. The 1-hydroxybenzotriazole (HBT) and syringaldehyde led to the highest transformation rates of EE2 (approximately 80 ± 2.4%). Near-total removal (90 ± 7.2%) of 4-t-BP was achieved with TEMPO in 2 h. With the metabolites identified through gas chromatography-tandem mass spectrometry (GC-MS), metabolic pathways of degradation were suggested. The results highlight the potential of Chaetomium sp. strains in the conversion of micropollutants.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-022-03439-1.

Evaluating the potential of engineered Trichoderma atroviride and its laccase-mediated system for the efficient bioconversion of 5-hydroxymethylfufural

5-Hydroxymethylfurfural (HMF) is a fermentation inhibitor which is formed during acid-based thermochemical pre-treatment of biomass. The present study involves two approaches for HMF conversion; the first includes screening and identification of fungal strains which produce oxidoreductases for HMF bioconversion, and thereafter evaluating their roles in HMF conversion. Out of the ten fungal strains screened, genetically engineered Trichoderma atroviride (Lac⁺) showed maximum HMF bioconversion and the activities of ligninolytic enzymes produced were noted. Maximum HMF conversion of 99% was achieved at pH 5.0 and 30 °C when 72 h old 10% inoculum of T. atroviride (Lac⁺) was utilized for 6 days. Based on the fungal bioconversion of HMF to 2, 5 diformylfuran with 58% yield, laccase was observed to influence the conversion process. Thus, a comparative study was established on HMF conversion by 100 U/mL of commercial laccases and partially purified laccase from T. atroviride (Lac+). In the presence of TEMPO, T. atroviride laccase showed comparable HMF conversion to commercial laccases, which establishes the efficiency of fungi and ligninolytic enzymes in bioconversion of HMF to value-added products.

Development of multifarious carrier materials and impact conditions of immobilised microbial technology for environmental remediation: A review

Microbial technology is the most sustainable and eco-friendly method of environmental remediation. Immobilised microorganisms were introduced to further advance microbial technology. In immobilisation technology, carrier materials distribute a large number of microorganisms evenly on their surface or inside and protect them from external interference to better treat the targets, thus effectively improving their bioavailability. Although many carrier materials have been developed, there have been relatively few comprehensive reviews. Therefore, this paper summarises the types of carrier materials explored in the last ten years from the perspective of structure, microbial activity, and cost. Among these, carbon materials and biofilms, as environmentally friendly functional materials, have been widely applied for immobilisation because of their abundant sources and favorable growth conditions for microorganisms. The novel covalent organic framework (COF) could also be a new immobilisation material, due to its easy preparation and high performance. Different immobilisation methods were used to determine the relationship between carriers and microorganisms. Co-immobilisation is particularly important because it can compensate for the deficiencies of a single immobilisation method. This paper emphasises that impact conditions also affect the immobilisation effect and function. In addition to temperature and pH, the media conditions during the preparation and reaction of materials also play a role. Additionally, this study mainly reviews the applications and mechanisms of immobilised microorganisms in environmental remediation. Future development of immobilisation technology should focus on the discovery of novel and environmentally friendly carrier materials, as well as the establishment of optimal immobilisation conditions for microorganisms. This review intends to provide references for the development of immobilisation technology in environmental applications and to further the improve understanding of immobilisation technology.

Laccase-assisted degradation of emerging recalcitrant compounds - A review

The main objective of this review is to provide up to date, brief, irrefutable, organized data on the conducted experiments on a range of emerging recalcitrant compounds such as Diclofenac (DCF), Chlorophenols (CPs), tetracycline (TCs), Triclosan (TCS), Bisphenol A (BPA) and Carbamazepine (CBZ). These compounds were selected from the categories of pharmaceutical contaminants (PCs), endocrine disruptors (EDs) and personal care products (PCPs) on the basis of their toxicity and concentration retained in the environment. In this context, detailed mechanism of laccase mediated degradation has been conversed that laccase assisted degradation occurs by one electron oxidation involving redox potential as underlying element of the process. Further, converging towards biotechnology, laccase immobilization increased removal efficiency, storage and reusability through various experimentally conducted studies. Laccase is being considered noteworthy as mediators facilitate laccase in oxidation of non-phenolic compounds and thereby increasing its substrate range which is being discussed in further in the review. The laccase assisted degradation mechanism of each compound has been elucidated but further studies to undercover proper degradation mechanisms needs to be performed.

Biological oxidation methods for the removal of organic and inorganic contaminants from wastewater: A comprehensive review

Enzyme-based bioremediation is a simple, cost-effective, and environmentally friendly method for isolating and removing a wide range of environmental pollutants. This study is a comprehensive review of recent studies on the oxidation of pollutants by biological oxidation methods, performed individually or in combination with other methods. The main bio-oxidants capable of removing all types of pollutants, such as organic and inorganic molecules, from fungi, bacteria, algae, and plants, and different types of enzymes, as well as the removal mechanisms, were investigated. The use of mediators and modification methods to improve the performance of microorganisms and their resistance under harsh real wastewater conditions was discussed, and numerous case studies were presented and compared. The advantages and disadvantages of conventional and novel immobilization methods, and the development of enzyme engineering to adjust the content and properties of the desired enzymes, were also explained. The optimal operating parameters such as temperature and pH, which usually lead to the best performance, were presented. A detailed overview of the different combination processes was also given, including bio-oxidation in coincident or consecutive combination with adsorption, advanced oxidation processes, and membrane separation. One of the most important issues that this study has addressed is the removal of both organic and inorganic contaminants, taking into account the actual wastewaters and the economic aspect.

Experimental and modeling of tetracycline degradation in water in a flow-through enzymatic monolithic reactor

In this work, the laccase from Trametes versicolor was immobilized in highly porous silica monoliths (0.6-cm diameter, 0.5-cm length). These monoliths feature a unique homogeneous network of interconnected macropores (20 μm) with mesopores (20 nm) in the skeleton and a high specific surface area (330 m²/g). The enzymatic monoliths were applied to degrade tetracycline (TC) in model aqueous solutions (20 ppm). For this purpose, a tubular flow-through reactor (FTR) configuration with recycling was built. The TC degradation was improved with oxygen saturation, presence of degradation products, and recirculation rate. The TC depletion reaches 50% in the FTR and 90% in a stirred tank reactor (CSTR) using crushed monoliths. These results indicate the importance of maintaining a high co-substrate concentration near active sites. A model coupling mass transfers with a Michaelis-Menten kinetics was applied to simulate the TC degradation in real wastewaters at actual TC concentration (2.8 10^-4 ppm). Simulation results show that industrial scale FTR reactor should be suitable to degrade 90% of TC in 5 h at a flow rate of 1 mL/min in a single passage flow configuration. Nevertheless, the process could certainly be further optimized in terms of laccase activity, oxygen supply near active sites, and contact time.

Kinetics and mechanisms for sulfamethoxazole transformation in the phenolic acid-laccase (Trametes versicolor) system

Oxidation of phenolic acids (PCs) by laccase could produce various kinds of reactive oxygen species (ROS), which is expected to have substantial impact on the transformation of antibiotics like sulfamethoxazole (SMX) in soil and aquatic environments. In this study, the formation of semiquinones radical (SQ^●-), superoxide anion radical (O₂^●-), hydrogen peroxide (H₂O₂), hydroxyl radical (^●OH), and singlet oxygen (¹O₂) in a laccase-gallic acid (GA) reaction system was confirmed. Meanwhile, GA would be transformed to its monomeric quinone and quinones of di- and tri-polymers. Transformation of SMX by laccase alone is negligible, while which was greatly enhanced in the presence of GA at the optimal pH of 5.5. The dissolved O₂ was the requisite for transformation of SMX due to its fundamental role in the formation of SQ^●-, the key species initializing the chain reactions for the generation of other ROS. The quenching experiments indicated O₂^●- and ¹O₂ were the main ROS responsible for SMX transformation. A total of thirteen products were proposed for the SMX transformation, with the pathways including the breaking of S-N bond, the cleavage of oxazole ring, electrophilic substitution, Michael addition, and condensation reactions. Moreover, the existence of electron-withdrawing substitution group on the benzene ring of PCs and less stability of SQ^●- was believed to be favorable for the transformation of SMX. The results above expand our understanding on the role of oxidation of PCs by laccase in the SMX transformation in environments and are of significance in relation to use of laccase in dealing with SMX pollution.

Spent waste from edible mushrooms offers innovative strategies for the remediation of persistent organic micropollutants: A review

Urgent and innovative strategies for removal of persistent organic micropollutants (OMPs) in soil, groundwater, and surface water are the need of the hour. OMPs detected in contaminated soils and effluents from wastewater treatment plants (WWTPs) are categorized as environmentally persistent pharmaceutical pollutants (EPPPs), and endocrine disrupting chemicals (EDCs), their admixture could cause serious ecological issues to the non-target species. As complete eradication of OMPs is not possible with the extant conventional WWTPs technology, the inordinate and reckless application of OMPs negatively impacts environmental regenerative and resilience capacity. Therefore, the cardinal focus of this review is the bioremediation of persistent OMPs through efficient application of an agro-waste, i.e. spent mushroom waste (SMW). This innovative, green, long-term strategy embedded in the circular economy, based on state of the art information is comprehensively assessed in this paper. SMW accrues ligninolytic enzymes such as laccase and peroxidase, with efficient mechanism to facilitate biodegradation of recalcitrant organic pollutants. It is vital in this context that future research should address immobilization of such enzymes to overcome quantitative and qualitative issues obstructing their widespread use in biodegradation. Therefore, dual benefit is gained from cultivating critical cash crops like mushrooms to meet the escalating demand for food resources and to aid in biodegradation. Hence, mushroom cultivation has positive environmental, social, and economic implications in developing countries like India.

Novel laccase from Xylaria polymorpha and its efficiency in the biotransformation of pharmaceuticals: Optimization of operational conditions, comparative effect of redox-mediators and toxicity studies

The promising potentials of biocatalytic treatment processes in the removal of micropollutants whilst eliminating health and environmental hazards have attracted great attention in recent years. This current work investigated the biotransformation efficiency of a novel laccase from Xylaria polymorpha (XPL) in comparison with commercial laccases from Trametes versicolor (TVL) and Aspergillus sp. (ASL). XPL exhibited better oxidation performance (95.7%) on AMX than TVL (92.8%) and ASL (90.5%). Optimization of operational conditions revealed that AMX was best oxidized at pH 5, temperature (30 °C), and concentration (1.0 mg L^-1). The investigation carried out to determine the effect of redox mediators revealed violuric acid (VLA) as the best redox mediator. The laccase stability experiments elucidated that the oxidation of AMX is time and mediator concentration dependent with ABTS exhibiting highest deactivation of XPL active sites. Two metabolic products; amoxicillin penilloic acid and 5-hydroxy-6-(4-hydroxyphenyl)- 3-(1,3-thiazolidin-2-yl)piperazin-2-one of AMX were obtained through Liquid Chromatography-Mass Spectrometry (LC-MS) analyses. The toxicity assessments carried out after oxidation of AMX by XPL showed 94% and 97% reduced toxicity on Artemia salina and Aliivibrio fischeri respectively. The study further underscored the efficiency of biocatalytic-mediator technology in the transformation of complex micropollutants into less toxic substances in an eco-friendly way.

Phenoxyl mediators improve enzymatic degradation of organic pollutants: Effect and mechanism

A mediation strategy can effectively overcome the low reaction activity of enzymes with nonspecific substrates. In this study, we demonstrated how phenol compounds can mitigate the substrate limitation of HRP in catalytic degradation of various organic pollutants. In a classical HRP/H₂O₂ system, phenol and natural phenolic compounds (4-HBA & pHBA), exhibited up to over 100-fold enhancement in eliminating organic dyes and persistent antibiotics while the loading is only 2-5 wt%. A combination of molecular modelling, docking and frontier orbital energy analysis was employed to elucidate the catalytic performance and mechanism. We revealed that (1) generating phenoxyl radicals required the proximity of mediators to the HRP active centre, and (2) the subsequent efficient radical transfer to pollutants was determined by the large energy gap between the SOMO energy of phenoxyl radicals and the HOMO energy of phenols. When considering phenols as pollutants, we showed a synergistic effect on catalytic degradation of phenols, dyes, and tetracycline with a removal efficiency of 71-92 %. Overall, this work not only demonstrates that phenoxyl mediators can overcome the lower efficiency and substrate-specificity limitations of the HRP/H₂O₂ system but also revealed their structure-mediation relationship, implying great potential in the biodegradation of diverse pollutants and their mixtures.

Degradation of sulfonamides in aquaculture wastewater by laccase-syringaldehyde mediator system: Response surface optimization, degradation kinetics, and degradation pathway

As a new type of environmental pollutant, environmental antibiotic residues have attracted widespread attention, and the degradation and removal of antibiotics has become an engaging topic for scholars. In this paper, Novozym 51003 industrialized laccase and syringaldehyde were combined to degrade sulfonamides in aquaculture wastewater. Design Expert10 software was used for multiple regression analysis, and a response surface regression model was established to obtain the optimal degradation parameters. In the actual application, the degradation system could maintain a stable performance within 9 h, and timely supplement of the mediator could achieve a better continuous degradation effect. Low concentrations of heavy metals and organic matter would not significantly affect the degradation performance of the laccase-mediator system, making the degradation system suitable for a wide range of water quality. Enzymatic reaction kinetics demonstrated a strong affinity of sulfadiazine to the substrate. Ten degradation products were speculated using high-resolution mass spectrum based on the mass/charge ratios and the publication results. Four types of possible degradation pathways of sulfadiazine were deduced. This work provides a practical method for the degradation and removal of sulfonamide antibiotics in actual sewage.

Bioremoval of estrogens by laccase immobilized onto polyacrylonitrile/polyethersulfone material: Effect of inhibitors and mediators, process characterization and catalytic pathways determination

The presence of micropollutants in water, wastewater and soil are a global problem due to their persistent effect on ecosystems and human health. Although there are many methods of removal of environmental pollutants, they are often ineffective for degradation of pharmaceuticals, including estrogens. In presented work we proposed fabrication of electrospun material from polyacrylonitrile/polyethersulfone (PAN/PES) as a support for laccase immobilization by covalent binding. Oxidoreductase was attached to the electrospun fibers using polydopamine as a linker and produced system was used for degradation of two estrogens: 17β-estradiol (E2) and 17α-ethynylestradiol (EE2). It was shown that 92% of E2 and 100% of EE2 were degraded after 24 h of the process. Moreover, the effect of surfactants, metal ions and mediators on conversion efficiencies of estrogens was investigated and it was confirmed that immobilized enzyme possessed higher resistance to inhibitory agents as well as thermal and storage stability, compared to its native form. Finally, estrogenic activities of E2 and EE2 solutions decreased around 99% and 87%, respectively, after enzymatic conversion, that corresponds to significant reduction of the total organic carbon and formation of low-toxic final products of estrogens degradation.

Instantaneous synthesis and full characterization of organic-inorganic laccase-cobalt phosphate hybrid nanoflowers

A novel approach termed the "concentrated method" was developed for the instant fabrication of laccase@Co₃(PO₄)₂•hybrid nanoflowers (HNFs). The constructed HNFs were obtained by optimizing the concentration of cobalt chloride and phosphate buffer to reach the highest activity recovery. The incorporation of 30 mM CoCl₂ and 160 mM phosphate buffer (pH 7.4) resulted in a fast anisotropic growth of the nanomaterials. The purposed method did not involve harsh conditions and prolonged incubation of precursors, as the most reported approaches for the synthesis of HNFs. The catalytic efficiency of the immobilized and free laccase was 460 and 400 M⁻¹S⁻¹, respectively. Also, the enzymatic activity of the prepared biocatalyst was 113% of the free enzyme (0.5 U mL⁻¹). The stability of the synthesized HNFs was enhanced by 400% at pH 6.5–9.5 and the elevated temperatures. The activity of laccase@Co₃(PO₄)₂•HNFs declined to 50% of the initial value after 10 reusability cycles, indicating successful immobilization of the enzyme. Structural studies revealed a 32% increase in the α-helix content after hybridization with cobalt phosphate, which improved the activity and stability of the immobilized laccase. Furthermore, the fabricated HNFs exhibited a considerable ability to remove moxifloxacin as an emerging pollutant. The antibiotic (10 mg L⁻¹) was removed by 24% and 75% after 24 h through adsorption and biodegradation, respectively. This study introduces a new method for synthesizing HNFs, which could be used for the fabrication of efficient biocatalysts, biosensors, and adsorbents for industrial, biomedical, and environmental applications.

Biocatalytic Elimination of Pharmaceutics Found in Water With Hierarchical Silica Monoliths in Continuous Flow

Pharmaceutical products (PPs) are considered as emerging micropollutans in wastewaters, river and seawaters, and sediments. The biodegradation of PPs, such as ciprofloxacin, amoxicillin, sulfamethoxazole, and tetracycline by enzymes in aqueous solution was investigated. Laccase from Trametes versicolor was immobilized on silica monoliths with hierarchical meso-/macropores. Different methods of enzyme immobilization were experienced. The most efficient process was the enzyme covalent bonding through glutaraldehyde coupling on amino-grafted silica monoliths. Silica monoliths with different macropore and mesopore diameters were studied. The best support was the monolith featuring the largest macropore diameter (20 µm) leading to the highest permeability and the lowest pressure drop and the largest mesopore diameter (20 nm) ensuring high enzyme accessibility. The optimized enzymatic reactor (150 mg) was used for the degradation of a PP mixture (20 ppm each in 30 ml) in a continuous recycling configuration at a flow rate of 1 ml/min. The PP elimination efficiency after 24 h was as high as 100% for amoxicillin, 60% for sulfamethoxazole, 55% for tetracycline, and 30% for ciprofloxacin.

Testing for the ability to modify antibiotics of Panus tigrinus 8/18 Lentinus strigosus 1566 laccase

In advanced biotechnology, the utilization of enzymes to achieve new or modified compounds with antibacterial, fungicidal, and anti-cancer specifications is crucial. Mushroom lactases are a hopeful biocatalyst for the synthesis and modification of different compounds. They are an accessible and inexpensive enzyme for the preparation of reaction objects and have recently received attention. Laccase purification was performed from basidiomycete Lentinus strigosus (LS) in several stages: Stage 1. On ion-exchange chromatography on TEAE Servacell 23 (400 ml), two distinctly separated laccase activity peaks were observed, eluted from the carrier at 0.21 and 0.27 M NaCl. In order to reduce the loss of enzymes, all fractions with laccase activity were collected, concentrated, and desalted using an ultrafiltration cell (Amicon, United States) with a UM-10 membrane. Stage 2. The resulting preparation with laccase activity was applied to a Q-Sepharose column (60 ml). Two well-separated peaks with laccase activity were obtained during the elution: laccase I (0.12 M NaCl) and laccase II (0.2 M NaCl). Stage 3. In the course of further purification of both enzymes, carried out on anion-exchange carrier Resource Q (6 ml), a broken gradient was used: 0 - 10%, 10 - 20%, and 20 - 100% with 1M NaCl. Stage 4. Both laccase I and laccase II, obtained after Resource Q, were desalted, concentrated to 1 ml each, and applied to a Superdex 75 gel filtration column. As a result, two laccases were obtained in a homogeneous form.

Laccases—Versatile Enzymes Used to Reduce Environmental Pollution

The accumulation of waste and toxic compounds has become increasingly harmful to the environment and human health. In this context, the use of laccases has become a focus of interest, due to the properties of these versatile enzymes: low substrate specificity, and water formation as a non-toxic end product. Thus, we begin our study with a general overview of the importance of laccase for the environment and industry, starting with the sources of laccases (plant, bacterial and fungal laccases), the structure and mechanism of laccases, microbial biosynthesis, and the immobilization of laccases. Then, we continue with an overview of agro-waste treatment by laccases wherein we observe the importance of laccases for the biodisponibilization of substrates and the biodegradation of agro-industrial byproducts; we then show some aspects regarding the degradation of xenobiotic compounds, dyes, and pharmaceutical products. The objective of this research is to emphasize and fully investigate the effects of laccase action on the decomposition of lignocellulosic materials and on the removal of harmful compounds from soil and water, in order to provide a sustainable solution to reducing environmental pollution.

Potential of agro-industrial produced laccase to remove ciprofloxacin

Ciprofloxacin (CIP), a widely used antibiotic, is frequently detected in the environment due to insufficient wastewater and water treatment. Hence, novel, green and cost-effective technologies are required to enhance the removal of these pollutants. The potency of crude enzymes, especially laccases, produced by white-rot fungi was tested to assess their effectiveness to degrade CIP from water. Crude laccase alone could not oxidize CIP. The addition of syringaldehyde, a redox mediator, resulted in a decrease in antibiotic concentration up to 68.09±0.12% in 24 h, which was the highest removal efficiency achieved with 0.15 mg/mL syringaldehyde and 2 mg/mL of crude laccase (0.1 U/ml). Crude laccase oxidation of CIP was inhibited after 6 h of treatment. To compare, a pure enzyme with the same activity as the crude one removed 86% of CIP in 24 h. No inhibitory effect during the treatment was observed. The estimation of antimicrobial efficiency revealed that after 6 h of treatment, the toxicity towards Escherichia coli decreased by 30%. The wastewater treatment by the crude laccase-mediated system was estimated to significantly reduce the cost of enzymatic treatment.

Recent Advances in the Development of Laccase-Based Biosensors via Nano-Immobilization Techniques

Monitoring phenolic compounds is critical in the environmental, food, and medical sectors. Among many recent advanced detection platforms, laccase-based biosensing platforms gave very rapid, effective, online, and in situ sensing of phenolic compounds. In laccase-based biosensors, laccase immobilization techniques have a vital role. However, a detailing of the advancements in laccase immobilization techniques employed in laccase-based biosensors is lacking in the literature. Thus, in this review, we assessed how the nano-immobilization techniques shaped the laccase biosensing platforms. We discussed novel developments in laccase immobilization techniques such as entrapment, adsorption, cross-linking, and covalent over new nanocomposites in laccase biosensors. We made a comprehensive assessment based on the current literature for future perspectives of nano-immobilized laccase biosensors. We found the important key areas toward which future laccase biosensor research seems to be heading. These include 1. A focus on the development of multi-layer laccase over electrode surface, 2. The need to utilize more covalent immobilization routes, as they change the laccase specificity toward phenolic compounds, 3. The advancement in polymeric matrices with electroconductive properties, and 4. novel entrapment techniques like biomineralization using laccase molecules. Thus, in this review, we provided a detailed account of immobilization in laccase biosensors and their feasibility in the future for the development of highly specific laccase biosensors in industrial, medicinal, food, and environmental applications.

Biocatalytic remediation of pharmaceutically active micropollutants for environmental sustainability

The discharge of an alarming number of recalcitrant pollutants from various industrial activities presents a serious threat to environmental sustainability and ecological integrity. Bioremediation has gained immense interest around the world due to its environmentally friendly and cost-effective nature. In contrast to physical and chemical methods, the use of microbial enzymes, particularly immobilized biocatalysts, has been demonstrated as a versatile approach for the sustainable mitigation of environmental pollution. Considerable attention is now devoted to developing novel enzyme engineering approaches and state-of-the-art bioreactor design for ameliorating the overall bio-catalysis and biodegradation performance of enzymes. This review discusses the contemporary and state of the art technical and scientific progress regarding applying oxidoreductase enzyme-based biocatalytic systems to remediate a vast number of pharmaceutically active compounds from water and wastewater bodies. A comprehensive insight into enzyme immobilization, the role of mediators, bioreactors designing, and transformation products of pharmaceuticals and their associated toxicity is provided. Additional studies are necessary to elucidate enzymatic degradation mechanisms, monitor the toxicity levels of the resulting degraded metabolites and optimize the entire bio-treatment strategy for technical and economical affordability.

Toward Characterizing the Genetic Basis of Trace Organic Contaminant Biotransformation in Activated Sludge: The Role of Multicopper Oxidases as a Case Study

Activated sludge treatment leverages the ability of microbes to uptake and (co)-metabolize chemicals and has shown promise in eliminating trace organic contaminants (TrOCs) during wastewater treatment. However, targeted interventions to optimize the process are limited as the fundamental drivers of the observed reactions remain elusive. In this work, we present a comprehensive workflow for the identification and characterization of key enzymes involved in TrOCs biotransformation pathways in complex microbial communities. To demonstrate the applicability of the workflow, we investigated the role of the enzymatic group of multicopper oxidases (MCOs) as one putatively relevant driver of TrOCs biotransformation. To this end, we analyzed activated sludge metatranscriptomic data and selected, synthesized, and heterologously expressed three phylogenetically distinct MCO-encoding genes expressed in communities with different TrOCs oxidation potentials. Following the purification of the encoded enzymes, we screened their activities against different substrates. We saw that MCOs exhibit significant activities against selected TrOCs in the presence of the mediator compound 2,2'-azino-bis-3-ethylbenzthiazoline-6-sulfonic acid and, in some cases, also in the presence of the wastewater contaminant 4'-hydroxy-benzotriazole. In the first case, we identified oxidation products previously reported from activated sludge communities and concluded that in the presence of appropriate mediators, bacterial MCOs could contribute to the biological removal of TrOCs. Similar investigations of other key enzyme systems may significantly advance our understanding of TrOCs biodegradation and assist the rational design of biology-based water treatment strategies in the future.

Medicines as an emergent contaminant: the review of microbial biodegration potential

Emerging environmental contaminants, such as medicine waste, are of great concern to the scientific community and to the local environmental and health departments because of their potential long-term effects and ecotoxicological risk. Besides the prolonged use of medicines for the development of modern society, the elucidation of their effect on the ecosystem is relatively recent. Medicine waste and its metabolites can, for instance, cause alterations in microbial dynamics and disturb fish behavior. Bioremediation is an efficient and eco-friendly technology that appears as a suitable alternative to conventional methods of water waste and sludge treatment and has the capacity to remove or reduce the presence of emerging contaminants. Thus, this review has the objective of compiling information on environmental contamination by common medicines and their microbial biodegradation, focusing on five therapeutic classes: analgesics, antibiotics, antidepressants, non-steroidal anti-inflammatory drugs (NSAIDs), and contraceptives. Their effects in the environment will also be analyzed, as well as the possible routes of degradation by microorganisms.

The study of laccase immobilization optimization and stability improvement on CTAB-KOH modified biochar

BACKGROUND

Although laccase has a good catalytic oxidation ability, free laccase shows a poor stability. Enzyme immobilization is a common method to improve enzyme stability and endow the enzyme with reusability. Adsorption is the simplest and common method. Modified biochar has attracted great attention due to its excellent performance.

RESULTS

In this paper, cetyltrimethylammonium bromide (CTAB)-KOH modified biochar (CKMB) was used to immobilize laccase by adsorption method (laccase@CKMB). Based on the results of the single-factor experiments, the optimal loading conditions of laccase@CKMB were studied with the assistance of Design-Expert 12 and response surface methods. The predicted optimal experimental conditions were laccase dosage 1.78 mg/mL, pH 3.1 and 312 K. Under these conditions, the activity recovery of laccase@CKMB was the highest, reaching 61.78%. Then, the CKMB and laccase@CKMB were characterized by TGA, FT-IR, XRD, BET and SEM, and the results showed that laccase could be well immobilized on CKMB, the maximum enzyme loading could reach 57.5 mg/g. Compared to free laccase, the storage and pH stability of laccase@CKMB was improved greatly. The laccase@CKMB retained about 40% of relative activity (4 °C, 30 days) and more than 50% of relative activity at pH 2.0-6.0. In addition, the laccase@CKMB indicated the reusability up to 6 reaction cycles while retaining 45.1% of relative activity. Moreover, the thermal deactivation kinetic studies of laccase@CKMB showed a lower k value (0.00275 min^- 1) and higher t_1/2 values (252.0 min) than the k value (0.00573 min^- 1) and t_1/2 values (121.0 min) of free laccase.

CONCLUSIONS

We explored scientific and reasonable immobilization conditions of laccase@CKMB, and the laccase@CKMB possessed relatively better stabilities, which gave the immobilization of laccase on this cheap and easily available carrier material the possibility of industrial applications.

Enzyme polymer engineered structure strategy to enhance cross-linked enzyme aggregate stability: a step forward in laccase exploitation for cannabidiol removal from wastewater

Despite all its advantages and potential, cross-linking enzyme aggregate (CLEA) technology is still not applied at an industrial scale for enzyme insolubilization for bioremediation purposes. In this study, the enzyme polymer engineered structure (EPES) method was used to enhance CLEA stability and reuse. A crude laccase from Trametes hirsuta was successfully insolubilized to form EPES-CLEAs. The polymeric network provided excellent stability (> 90%) to CLEAs after a 24-h incubation in a non-buffered municipal wastewater effluent (WW), and the biocatalysts were recycled using a centrifugation process. While CLEAs activity dropped to 17%, EPES-CLEAs showed a laccase activity retention of 67% after five cycles of 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) oxidation. After 8 h of treatment in WW, the EPES-CLEAs were equally as effective in removing cannabidiol (CBD) as the free-LAC (~ 37%). This research demonstrates that the EPES method is a promising alternative for CLEA stabilization and reuse in environmental conditions.

A novel process for the covalent immobilization of laccases on silica gel and its application for the elimination of pharmaceutical micropollutants

In the present work, pharmaceutical micropollutant degradation by laccase immobilized on silica through an innovative process is proposed. The influence of different parameters on the immobilization conditions was evaluated by a 2³ full factorial design, and parameters leading to the highest activity were identified. Under these conditions, laccase activity reached 14 ± 2 U g^-1 of silica with a protein immobilization yield of 35%. The biocatalyst characterization did not show any change in pH and thermal stabilities but enhanced the long-term storage of laccases. Immobilized T. versicolor laccases were then tested to remove four pharmaceutical micropollutants (amoxicillin, ciprofloxacin, carbamazepine, and sulfamethoxazole) in the presence of redox mediators (syringaldehyde, p-coumaric acid, and ABTS). High removal yields (50-100% according to the pollutant) were obtained within 4 h of treatment due to the synergistic effect of laccase-mediator biotransformation and adsorption on the support. Overall, the pharmaceuticals' removal efficiency was highly influenced by their physicochemical properties; however, the presence of redox mediators impacted not only the oxidation mechanism but also the interactions between the biocatalyst and micropollutants. Finally, the reusability of the biocatalyst was proved during 7 degradation cycles.

Investigation of reactive Blue 19 biodegradation and byproducts toxicity assessment using crude laccase extract from Trametes versicolor

Crude laccase potency on biodegradation and detoxification of Reactive blue 19 (RB-19) were demonstrated, along with prediction of degradation mechanisms, pathways and byproducts analysis. Trametes versicolor, cultured on pampas grass inflorescence (Cortaderia selloana), yielded the best crude laccase activity (15.36 U/g). 10 U CLE activities demonstrated a biodegradation yield (85%) in 210 min, at pH 4, 50 °C and 200 mg/L RB-19 concentrations. Evolution of a brown color that absorbed maximally at 478 nm was observed during biodegradation. Two methods were adopted for byproducts extraction, three methods for toxicity analysis and four models for kinetic parameters (K_m and V_max) determination. 2-ethylanthracene, 2-hydroxycyclohexa-2,4-dien-1-one, 2(4-methylphenyl)-ethan-1-amine, 1-[6-hydroperoxy-4,5-bis(sulfooxy)oxan-3-yl]triaza-1,2-dien-2-ium, naphthalene-2,7-disulfonic acid and N-[(5-oxooxolan-2-yl)methyl]acetamide were detected as toxic byproducts. Brown color evolution was due to 1,1,1-triethyl-3-(methoxycarbonyl)-2,2-dioxo-2λ6-diazathian-1-ium (methoxycarbonyl sulfanyl-triethylammonium hydroxide) inner salt. Increase in color density (light to dark brown) was a function of byproduct(s) biodegradation and polymerization. RB-19 and byproduct acute toxicities were decreased significantly (98% - 6.91%). Kinetic parameters K_m (18.05 mg/L) and V_max (0.31 mg/L. min^-1) from the four kinetic models demonstrated higher affinity of CLE to RB-19. CLE yielded a catalytic activity (V_max/K_m =0.017 min^-1) demonstrating the flexibility of CLE active site to RB-19 binding over commercial laccase.

An effective in-situ method for laccase immobilization: Excellent activity, effective antibiotic removal rate and low potential ecological risk for degradation products

In this study, we used a simple in-situ biomineralization method to immobilize Bacillus subtilis (B. subtilis)-derived laccase into the copper-Trimesic acid framework (Cu-BTC), and the synthesized Laccase@Cu-BTC particles were used to degrade tetracycline and ampicillin. Compared with free laccase, the Laccase@Cu-BTC showed 16.5-fold of activity recovery, higher thermo-tolerant performance, more excellent acid-proof ability and reusability. Without any mediators, Laccase@Cu-BTC displayed high degradation efficiency (nearly 100%) for tetracycline and ampicillin in some actual water. The degradation mechanism and proposed degradation pathways of tetracycline and ampicillin were discussed technically. Besides, bacteriostatic assay and survival test of Escherichia coli (E. coli) and B. subtilis confirmed the loss of antibiotic activity for tetracycline and ampicillin, as well as the low ecotoxicity of the degradation products. Our research demonstrates that Laccase@Cu-BTC has excellent performance in the effective removal of antibiotics and the detoxification of degradation products, which make it a promising candidate for environmental recovery.

From Laboratory Tests to the Ecoremedial System: The Importance of Microorganisms in the Recovery of PPCPs-Disturbed Ecosystems

The presence of a wide variety of emerging pollutants in natural water resources is an important global water quality challenge. Pharmaceuticals and personal care products (PPCPs) are known as emerging contaminants, widely used by modern society. This objective ensures availability and sustainable management of water and sanitation for all, according to the 2030 Agenda. Wastewater treatment plants (WWTP) do not always mitigate the presence of these emerging contaminants in effluents discharged into the environment, although the removal efficiency of WWTP varies based on the techniques used. This main subject is framed within a broader environmental paradigm, such as the transition to a circular economy. The research and innovation within the WWTP will play a key role in improving the water resource management and its surrounding industrial and natural ecosystems. Even though bioremediation is a green technology, its integration into the bio-economy strategy, which improves the quality of the environment, is surprisingly rare if we compare to other corrective techniques (physical and chemical). This work carries out a bibliographic review, since the beginning of the 21st century, on the biological remediation of some PPCPs, focusing on organisms (or their by-products) used at the scale of laboratory or scale-up. PPCPs have been selected on the basics of their occurrence in water resources. The data reveal that, despite the advantages that are associated with bioremediation, it is not the first option in the case of the recovery of systems contaminated with PPCPs. The results also show that fungi and bacteria are the most frequently studied microorganisms, with the latter being more easily implanted in complex biotechnological systems (78% of bacterial manuscripts vs. 40% fungi). A total of 52 works has been published while using microalgae and only in 7% of them, these organisms were used on a large scale. Special emphasis is made on the advantages that are provided by biotechnological systems in series, as well as on the need for eco-toxicological control that is associated with any process of recovery of contaminated systems.

Ciprofloxacin removal via sequential electro-oxidation and enzymatic oxidation

The combination of electro-oxidation and enzymatic oxidation was tested to evaluate the potency of this system to remove ciprofloxacin (CIP), a fluoroquinolone antibiotic, from water. For the electro-oxidation boron-doped diamond (BDD) and mixed metal oxides anodes were tested, at three current densities (4.42, 17.7 and 35.4 A/cm²). BDD anode at 35.4 A/cm² exhibited the highest removal efficiency in the shortest time (>90 % removal in 6 min). For the enzymatic oxidation, laccase from Trametes versicolor was chosen. Laccase alone was not able to remove CIP; hence the influence of redox mediators was investigated. The addition of syringaldehyde (SA) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) resulted in enhanced CIP transformation. About 48.9±4.0 % of CIP remained after 4 h of treatment when SA-mediated laccase was applied and 87.8±6.6 % in the case of ABTS-mediated laccase. The coupling of enzymatic oxidation followed by electro-oxidation led to 73 % removal of the antibiotic. Additionally, the antimicrobial activity increased up to its original efficiency after the treatment. The combination of electro-oxidation followed by enzymatic oxidation led to 97-99 % removal of CIP. There was no antimicrobial activity of the solution after the treatment. The tests with wastewater confirmed the efficacy of the system to remove CIP from the complex matrix.

Ecofriendly laccases treatment to challenge micropollutants issue in municipal wastewaters

In this study, a multidisciplinary approach investigated the enzymatic degradation of micropollutants in real, not modified, municipal wastewaters of a plant located in Italy. Stir Bar Sorptive Extraction combined to Gas Chromatography-Mass Spectrometric detection (SBSE-GC-MS) was applied to profile targeted pollutants in wastewaters collected after the primary sedimentation (W1) and the final effluent (W2). Fifteen compounds were detected at ng/L - μg/L, including pesticides, personal care products (PCPs) and drugs. The most abundant micropollutants were bis(2-ethylhexyl) phthalate, diethyl phthalate and ketoprofen. Laccases of Trametes pubescens MUT 2400 were very active against all the target micropollutants: except few cases, their concentration was reduced more than 60%. Chemical analysis and environmental risk do not always come together. To verify whether the treated wastewaters can represent a stressor for the aquatic ecosystem, toxicity was also evaluated. Raphidocelis subcapitata and Lepidium sativum tests showed a clear ecotoxicity reduction, even though they did not evenly respond. Two in vitro tests (E-screen test and MELN assay) were used to evaluate the estrogenic activity. Treatments already operating in the plant (e.g. activated sludge) partially reduced the estradiol equivalent concentration, and it was almost negligible after the laccases treatment. The results of this study suggest that laccases of T. pubescens are promising biocatalysts for the micropollutants transformation in wastewaters and surface waters.

Magnetic nanoparticles encapsulated laccase nanoflowers: evaluation of enzymatic activity and reusability for degradation of malachite green

Magnetic laccase nanoflowers (MNFs-Lac) were successfully prepared through encapsulating Fe₃O₄ magnetic nanoparticles into the interior of laccase nanoflowers by grafting N-(phosphonomethyl)iminodiacetic acid (PMIDA) as an interconnecting bridge between the magnetic nanoparticles and copper ions. The characterizations by scanning electron microscopy and transmission electron microscopy showed that MNFs-Lac were spherical, porous and flower-like crystals with diameters of ∼10 μm, and Fe₃O₄ nanoparticles were encapsulated in the interior of MNFs-Lac evenly. The enzymatic activity and reusability of MNFs-Lac were evaluated based on the degradation efficiency for malachite green (MG). The degradation parameters, concerning initial MG concentration, dosage of MNFs-Lac, reaction temperature, pH value and reaction time, were optimized through single-factor experiments. Under the optimal conditions, 25 mg·L^-1 MG can be degraded almost completely by 1.5 g·L^-1 MNFs-Lac within 15 min. When the MNFs-Lac were reused for 18 times, the degradation efficiency of MG was still as high as 90%. These results suggested that the modified preparation method improved greatly the reusability of MNFs-Lac, which made them more suitable to degrade MG in a water environment.

Recent development in the application of immobilized oxidative enzymes for bioremediation of hazardous micropollutants - A review

During the past several years, abundant progresses has been made in the development of immobilized oxidative enzymes with focus on finding new support materials, improving the immobilization methods and their applications. Nowadays, immobilized oxidative enzymes are broadly accepted as a green way to face the challenge of high amounts of micropollutants in nature. Among all oxidative enzymes, laccases and horseradish peroxidase were used frequently in recent years as they are general oxidative enzymes with ability to oxidize various types of compounds. Immobilized laccase or horseradish peroxidase are showed better stability, and reusability as well as easy separation from reaction mixture that make them more favorable and economic in compared to free enzymes. However, additional improvements are still essential such as: development of the new materials for immobilization with higher capacity, easy preparation, and cheaper price. Moreover, immobilization methods are still need improving to become more efficient and avoid enzyme wasting during immobilization and enzyme leakage through working cycles.

Biocatalytic degradation/redefining "removal" fate of pharmaceutically active compounds and antibiotics in the aquatic environment

Recently, the increasing concentration and persistent appearance of antibiotics traces in the water streams are considered an issue of high concern. In this context, an array of antibiotics has been categorized as pollutants of emerging concern due to their complex and highly stable bioactivity, indiscriminate usage with ultimate release into water bodies, and notable persistence in environmental matrices. Moreover, antibiotics traces containing household sewage/drain waste and pharmaceutical wastewater effluents contain a range of bioactive/toxic organic compounds, inorganic salts, pharmaceutically-active ingredients, or a mixture of all, which possesses negative influences ranging from ecological pollution to damage biodiversity. Moreover, their uncontrolled and undesirable bioaccumulation also poses a potential threat to target and non-target organisms in the environment. Aiming to tackle this issue effectively, various detection, quantification, degradation, and redefining "removal" processes have been proposed and investigated based on physical, chemical, and biological strategies. Though both useful and side effects of antibiotics on humans and animals are usually investigated thoroughly following safety and toxicity measures, however, their direct or indirect environmental impacts are not well reviewed yet. Owing to the considerable research gap, the environmental perfectives of antibiotics traces and their effects on target and non-target populations have now become the topic of research interest. Based on literature evidence, over the past several years, numerous individual studies have been performed and published covering various aspects of antibiotics. However, a comprehensive compilation on enzyme-based degradation of antibiotics is still lacking and requires careful consideration. Hence, this review summarizes up-to-date literature on enzymes as biocatalytic systems, explicitly, free as well as immobilized forms and their effective exploitation for the degradation of various antibiotics traces and other pharmaceutically-active compounds present in the water bodies. It is further envisioned that the enzyme-based strategies, for antibiotics degradation or removal, discussed herein, will help readers for a better understanding of antibiotics persistence in the environment along with the associated risks and removal measures. In summary, the current research thrust presented in this review will additionally evoke researcher to engineer robust and sustainable processes to effectively remediate antibiotics-contaminated environmental matrices.

Studies of advanced lignin valorization based on various types of lignolytic enzymes and microbes

Lignin is a robust material that is considered useless because it has an inhibitory effect on microbes and acts as a physical barrier for cellulose degradation. Therefore, it has been removed from cellulosic biomass to produce high-value materials. However, lignin monomers can be converted to value-added chemicals such as biodegradable plastics and food additives by appropriately engineered microbes. Lignin degradation through peroxidase, laccase and other proteins with auxiliary activity is the first step in lignin valorization. Metabolic engineering of microorganisms for increased tolerance and production yield is the second step for lignin valorization. Here, this review offers a summary of current biotechnologies using various enzymatic activities, synergistic enzyme mixtures and metabolic engineering for lignin valorization in biorefinery.