Characterization of synthetic polymers by MALDI-MS

Modern Electrospray Ionization Mass Spectrometry Techniques for the Characterization of Supramolecules and Coordination Compounds

Mass spectrometry is routinely used for myriad applications in clinical, industrial, and research laboratories worldwide. Developments in the areas of ionization sources, high-resolution mass analyzers, tandem mass spectrometry, and ion mobility have significantly extended the repertoire of mass spectrometrists; however, for coordination compounds and supramolecules, mass spectrometry remains underexplored and arguably underappreciated. Here, the reader is guided through different tools of modern electrospray ionization mass spectrometry that are suitable for larger inorganic complexes. All steps, from sample preparation and technical details to data analysis and interpretation are discussed. The main target audience of this tutorial is synthetic chemists as well as technicians/mass spectrometrists with little experience in characterizing labile inorganic compounds.

Mass spectrometry of polymers: A tutorial review

Ever since the inception of synthetic polymeric materials in the late 19th century, the number of studies on polymers as well as the complexity of their structures have only increased. The development and commercialization of new polymers with properties fine-tuned for specific technological, environmental, consumer, or biomedical applications requires powerful analytical techniques that permit the in-depth characterization of these materials. One such method with the ability to provide chemical composition and structure information with high sensitivity, selectivity, specificity, and speed is mass spectrometry (MS). This tutorial review presents and exemplifies the various MS techniques available for the elucidation of specific structural features in a synthetic polymer, including compositional complexity, primary structure, architecture, topology, and surface properties. Key to every MS analysis is sample conversion to gas-phase ions. This review describes the fundamentals of the most suitable ionization methods for synthetic materials and provides relevant sample preparation protocols. Most importantly, structural characterizations via one-step as well as hyphenated or multidimensional approaches are introduced and demonstrated with specific applications, including surface sensitive and imaging techniques. The aim of this tutorial review is to illustrate the capabilities of MS for the characterization of large, complex polymers and emphasize its potential as a powerful compositional and structural elucidation tool in polymer chemistry.

Nitro Indole Derivatives as Novel Dual-Polarity Matrices for MALDI Mass Spectrometry and Imaging with Broad Applications

A new matrix framework is presented in this study for the improved ionization efficiency of complex mixtures by matrix-assisted laser desorption ionization (MALDI) mass spectrometry/imaging. Five nitro indole (NI) derivatives [3-methyl-4-nitro-1H-indole (3,4-MNI), 3-methyl-6-nitro-1H-indole (3,6-MNI), 2,3-dimethyl-4-nitro-1H-indole (2,3,4-DMNI), 2,3-dimethyl-6-nitro-1H-indole (2,3,6-DMNI), and 4-nitro-1H-indole (4-NI)] were synthesized and shown to produce both positive and negative ions with a broad class of analytes as MALDI matrices. NI matrices were compared to several common matrices, such as 2,5-dihydroxybenzoic acid (DHB), alpha-cyano-4-hydroxylcinnamic acid (CHCA), sinapinic acid (SA), 1,5-diaminonaphthelene (1,5-DAN), and 9-aminoacridine (9-AA), for the analysis of lipid, peptide, protein, glycan, and perfluorooctanesulfonic acid (PFOS) compounds. 3,4-MNI demonstrated the best performance among the NI matrices. This matrix resulted in reduced ion suppression and better detection sensitivity for complex mixtures, for example, egg lipids/milk proteins/PFOS in tap water, while 2,3,6-DMNI was the best matrix for blueberry tissue imaging. Several important aspects of this work are reported: (1) dual-polarity ion production with NI matrices and complex mixtures; (2) quantitative analysis of PFOS with a LOQ of 0.5 ppb in tap water and 0.05 ppb in MQ water (without solid phase extraction enrichment), with accuracy and precision within 5%; (3) MALDI imaging with 2,3,6-DMNI as a matrix for plant metabolite/lipid identification with ionization enhancement in the negative ion mode m/z 600-900 region; and (4) development of a thin film deposition under/above tissue method for MALDI imaging with a vacuum sublimation matrix on a high-vacuum MALDI instrument.

Quantitation of polyethylene glycol by size exclusion chromatography with charged aerosol, differential refractive index, and multi-angle light scattering detectors

Polyethylene glycol (PEG) has found tremendous applications in pharmaceutical products and has played a critical role in PEGylated drug modalities to improve pharmacokinetic properties and biological efficacy. The characterization and quantitation of PEGs are essential to control manufacture process and drug product quality. However, the assay value of PEG could change dramatically depending on the structures of the PEG and the detection techniques used. In this study, we developed a size exclusion chromatographic (SEC) method for quantitative PEG analysis, and we systematically evaluated the performance of three online detectors with different operating principles: a charged aerosol detector (CAD), a differential refractive index (dRI) detector, and a multi-angle light scattering detector (MALS). Fourteen PEG compounds covering a wide range of molecular weight (MW, 1 - 40 kDa) and molecular architectures (linear, branched, Y-shaped and multi-arm geometries) were evaluated by these three detection techniques. Our study revealed that the dRI showed the most universal responses among all the PEGs regardless of their molecular weight or geometries. In the contrast, CAD and MALS detector showed MW-dependent and semi-universal geometry-dependent responses. Another key finding is that the relative response factor for each multi-arm PEG in the CAD and the MALS were inversely correlated, suggesting both can be applied to qualitatively assess polymers of different architectures, including the ones with subtle differences in their core structures. The comparison of the three detectors not only provides the fundamental and comprehensive understanding of PEG quantitation but also enables the process development and control of high-quality PEGs in producing PEGylated therapeutics in the pharmaceutical industry.

Characterization of balsam sulfide via pyrolysis-gas chromatography-mass spectrometry/sulfur chemiluminescence detection and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Balsam sulfide, produced by the reaction of turpentine/rosin and sulfur, has been used as one of the raw materials of liquid gold to decorate ceramics and tableware with thin gold film for more than 100 years. The characterization of balsam sulfide is still insufficient because of its compositional complexity. In this study, balsam sulfide was characterized using pyrolysis-gas chromatography (Py-GC)-mass spectrometry (MS) and Py-GC with sulfur chemiluminescence detection (SCD) as well as matrix-assisted laser desorption/ionization time-of-flight MS (MALDI-TOFMS). Py-GC-MS/SCD analyses of balsam sulfide and its model samples revealed that the low molecular weight reaction products were mainly composed of compounds of one α-pinene unit reacted with 1-3 sulfur atoms. In the analysis of the high molecular weight components by MALDI-TOFMS, the products of two or three α-pinene units crosslinked by sulfur atoms were observed. It was found that dehydrogenation reaction proceeded gradually with the increase in the reaction time.

Application of surface-layer matrix-assisted laser desorption/ionization mass spectrometry imaging to pharmaceutical-loaded poly(ester urea) films

Polymer thin films are often used in transdermal patches as a method of continuous drug administration for patients with chronic illness. Understanding the drug segregation and distribution within these films is important for monitoring proper drug release over time. Surface-layer matrix-assisted laser desorption/ionization mass spectrometry imaging (SL-MALDI-MSI) is a unique analytical technique that provides an optical representation of chemical compositions that exist at the surface of polymeric materials. Solvent-free sublimation is employed for application of matrix to the sample surface, so that only molecules in direct contact with the matrix layer are detected. Here, these methodologies are utilized to visualize variations in drug concentration at both the air and substrate interface in pharmaceutical-loaded polymer films.

Investigations into the characterization, degradation, and applications of biodegradable polymers by mass spectrometry

Biodegradable polymers have been getting more and more attention because of their contribution to the plastic pollution environmental issues and to move towards a circular economy. Nevertheless, biodegradable materials still exhibit various disadvantages restraining a widespread use in the market. Therefore, additional research efforts are required to improve their performance. Mass spectrometry (MS) affords a relevant contribution to optimize biodegradable polymer synthesis, to confirm macromolecular structures, to examine along the time the progress of degradation processes and highlight advantages and drawbacks in the extensive applications. This review aims to provide an overview of the MS investigations carried out to support the synthesis of biodegradable polymers, with helpful information on undesirable products or polymerization mechanism, to understand deterioration pathways by the structure of degradation products and to follow drug release and pharmacokinetic. Additionally, it summarizes MS studies addressed on environmental and health issues related to the extensive use of plastic materials, that is, potential migration of additives or microplastics identification and quantification. The paper is focused on the most significant studies relating to synthetic and microbial biodegradable polymers published in the last 15 years, not including agro-polymers such as proteins and polysaccharides.

Quasi-alternating copolymerization of oxiranes driven by a benign acetate-based catalyst

Alternating copolymers are distinctly unique in comparison with other copolymers. Herein, an in-depth investigation of the oxyanionic ring-opening copolymerization of propylene oxide (PO) and allyl glycidyl ether (AGE) from benzyl alcohol (BnOH) activated with potassium acetate (KOAc) complexed by 18-crown-6 ether (18C6) is described. We demonstrate that the 18C6/KOAc complex is an efficient and benign catalytic system to promote copolymerization of both oxirane monomers, leading to well-defined polyethers with varied comonomer content and low dispersity values (ƉM < 1.20). Kinetic analysis confirmed the controlled nature of the (co)polymerization process, and the determination of reactivity ratios revealed a quasi-alternating copolymerization profile, according to the Fineman-Ross method. The comparison between the quasi-alternating-type PO/AGE copolymerization and block or gradient copolymerization revealed significant differences, to confirm the different sequence incorporation in the different topological copolymers. These results highlight the great potential of 18C6/KOAc-mediated copolymerization process for the controlled sythesis of a series of copolymer topologies.

A novel measurement strategy and a dedicated sampling cell for the parallel characterization of organic and inorganic constituents in polymer samples by concurrent laser ablation ICP-OES and EI-MS

Polymeric composite materials are gaining importance due to their universal applicability and easy adaptability for their intended use. For the comprehensive characterization of these materials, the concurrent determination of the organic and the elemental constituents is necessary, which cannot be provided by classical analysis methods. In this work, we present a novel approach for advanced polymer analysis. The proposed approach is based on firing a focused laser beam onto a solid sample placed in an ablation cell. The generated gaseous and particular ablation products are measured online parallelly by EI-MS and ICP-OES. This bimodal approach allows direct characterization of the main organic and inorganic constituents of solid polymer samples. The LA-EI-MS data showed excellent agreement with the literature EI-MS data allowing not only the identification of pure polymers but also of copolymers, as demonstrated with acrylonitrile butadiene styrene (ABS) as the sample. The concurrent collection of ICP-OES elemental data is vital for classification, provenance determination, or authentication studies. The applicability of the proposed procedure has been demonstrated by analysis of various polymer samples from everyday use.

Gas-phase structure of polymer ions: Tying together theoretical approaches and ion mobility spectrometry

An increasing number of studies take advantage of ion mobility spectrometry (IMS) coupled to mass spectrometry (IMS-MS) to investigate the spatial structure of gaseous ions. Synthetic polymers occupy a unique place in the field of IMS-MS. Indeed, due to their intrinsic dispersity, they offer a broad range of homologous ions with different lengths. To help rationalize experimental data, various theoretical approaches have been described. First, the study of trend lines is proposed to derive physicochemical and structural parameters. However, the evaluation of data fitting reflects the overall behavior of the ions without reflecting specific information on their conformation. Atomistic simulations constitute another approach that provide accurate information about the ion shape. The overall scope of this review is dedicated to the synergy between IMS-MS and theoretical approaches, including computational chemistry, demonstrating the essential role they play to fully understand/interpret IMS-MS data.

Matrix-Assisted Laser Desorption and Electrospray Ionization Tandem Mass Spectrometry of Microbial and Synthetic Biodegradable Polymers

The in-depth structural and compositional investigation of biodegradable polymeric materials, neat or partly degraded, is crucial for their successful applications. Obviously, an exhaustive structural analysis of all synthetic macromolecules is essential in polymer chemistry to confirm the accomplishment of a preparation procedure, identify degradation products originating from side reactions, and monitor chemical-physical properties. Advanced mass spectrometry (MS) techniques have been increasingly applied in biodegradable polymer studies with a relevant role in their further development, valuation, and extension of application fields. However, single-stage MS is not always sufficient to identify unambiguously the polymer structure. Thus, tandem mass spectrometry (MS/MS) has more recently been employed for detailed structure characterization and in degradation and drug release monitoring of polymeric samples, among which are biodegradable polymers. This review aims to run through the investigations carried out by the soft ionization technique matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) and electrospray ionization mass spectrometry (ESI-MS) MS/MS in biodegradable polymers and present the resulting information.

Rapid and simple determination of average molecular weight and composition of synthetic polymers via electrospray ionization-mass spectrometry and a Bayesian universal charge deconvolution

RATIONALE

Simple, affordable, and rapid methods for identifying the molecular weight (MW) distribution and macromolecular composition of polymeric materials are limited. Current tools require extensive solvent consumption, linear calibrations, and expensive consumables. A simple method for the determination of average MW (M_n , M_w ) and chain end groups is demonstrated for synthetic homopolymer standards using direct injection electrospray ionization-mass spectrometry (ESI-MS) and an open-sourced charge deconvolution (CDC) algorithm.

METHODS

Five homopolymer standards in the 1-7 kDa MW range were analyzed using direct-injection ESI-MS on a quadrupole/time-of-flight mass spectrometer. The samples investigated, viz. two poly(ethylene oxide) (PEO) and two poly(styrene sulfonic acid) (PSS) standards with narrow polydispersity and one poly(d,l-alanine) (pAla) standard with undefined polydispersity, were chosen to illustrate challenges with ESI-MS quantitation. Using the UniDec program, weight average MWs (M_w ) obtained from the charge-deconvoluted spectra were compared to the reported M_w data of the standards from size exclusion chromatography (SEC) measurements.

RESULTS

The MW data derived for the PSS, PEO, and pAla standards agreed well with the corresponding reported M_w or MW range values. The method was able to provide MW, degree of polymerization (DP), and polydispersity index (PDI) information for polymers with narrow (PSS, PEO) as well as broader (pAla) molecular weight distribution; this feature provides an advantage over MW analysis via matrix-assisted laser desorption/ionization (MALDI) for ESI-compatible materials. PSS standards differing in average MW by only a few repeat units could be confidently distinguished. Additionally, the oligomeric resolution observed for all samples studied unveiled chain-end information not available through chromatographic analysis.

CONCLUSIONS

Overall, the free and easy-to-use UniDec CDC algorithm provides a simple, alternative method to measuring MW and DP for polymeric materials without high solvent consumption, expensive ionization sources, or calibration curves. Information about the masses of individual oligomers and the possibility to further characterize these oligomers using tandem mass spectrometry and/or ion mobility techniques constitutes additional benefits of this approach vis-à-vis traditional MW and PDI elucidation through SEC.

Characterization of styrene/methyl methacrylate/n-butyl acrylate terpolymer with Kendrick mass defect analysis in electrospray ionization-ion mobility spectrometry-mass spectrometry

RATIONALE

Synthesis of copolymer is one of the major approaches to establish sophisticated polymers. In copolymer analysis in mass spectrometry (MS), an increase in the number of monomer unit species and/or the polymer molecular weight results in complex mass spectra, and a method is required to solve this problem.

METHODS

In this study, electrospray ionization-ion mobility spectrometry-mass spectrometry was employed to analyze styrene/methyl methacrylate/n-butyl acrylate (St/MMA/nBA) terpolymers via Kendrick mass defect (KMD) analysis. An expanded Fourier transform-based noise reduction method for the copolymer was developed to improve the decrease in the signal/noise ratio observed in the higher m/z region.

RESULTS

Low-mass terpolymers (0.7 kDa) were identified by comparing the observed and theoretical results using a two-dimensional KMD plot. For the 1.5 kDa terpolymer, the signal overlap, of which KMD value was not matched with the theoretical one, was interpreted by the shift from the theoretical value in the KMD plot. For the 3.0 kDa terpolymers, the compositional candidates were determined by the prediction based on the compositional information of low-mass terpolymers previously analyzed. The 4.5 kDa terpolymer was interpreted after the expanded noise filtering.

CONCLUSIONS

The terpolymers, whose molecular weight was up to 4.5 kDa, were successfully characterized at a molecular level. The dependency of the St/MMA/nBA composition on molecular weight was observed; that is, the nBA content decreased with an increase in the molecular weight.

Covalent organic framework film-based laser desorption/ionization mass spectrometry for rapid and sensitive quantification of homocysteine in human serum

RATIONALE

Homocysteine (hcy) is a metabolite in the human body and an important determinant of cardiovascular health. To assist in the assessment of human cardiovascular safety, a rapid and accurate quantitative analysis method must be developed. Laser desorption/ionization mass spectrometry (LDI-MS) has been widely used in biological, chemical, and medical analyses due to its excellent characteristics of high throughput, low sample consumption, and high speed. Here, an LDI-MS method based on covalent organic framework (COF) film was developed for the rapid and sensitive determination of hcy in human serum using an isotope-labeled internal standard.

METHODS

We tried to cultivate COFs on indium-tin oxide substrate at room temperature to form a thin film, which was used in LDI-MS. Compared with the traditional organic matrices, the COF film had a clean background and a high signal response for the detection of hcy. In addition, using COF film as the substrate, with a high signal intensity and a clean background, can be helpful to analyze a series of small molecules such as amino acids, bisphenols (Bps), estrogens, and drugs. We evaluated the limit of detection (LOD) and the reproducibility of this method. Finally, the calibration curve was constructed for the quantification of serum hcy using an isotope-labeled internal standard and was applied for the rapid determination of hcy in clinical human serum.

RESULTS

COF film-assisted LDI-MS had a higher response signal and a cleaner background compared to four conventional organic matrices. The LOD of the method for hcy was 0.5 μmol/L, equivalent to 500 fmol. This method exhibited excellent performance for small-molecule compounds, including amino acids, Bps, drugs, and estrogens. The reproducibilities of this method for shot-to-shot and dot-to-dot were determined to be good. This method was applied for the rapid analysis of hcy in clinical human serum, showing good correlation with those obtained by hospital testing.

CONCLUSION

The COF film-based LDI-MS method had simple sample preparation, short analysis time, clean background, and good reproducibility for hcy analysis. As an important indicator of human health, the detection of serum hcy is of great significance to human health.

Identification and quantification of polymeric impurity in block copolymer by one-dimensional and two-dimensional liquid chromatography coupled to high-resolution mass spectrometry and evaporative light scattering detector

Identifying and quantifying polymeric impurities in a polymeric material is critical for understanding material quality and performance, but it remains a challenge requiring developing new characterization methods. In this work, a comprehensive two-dimensional liquid chromatography method with simultaneous evaporative light scattering and high-resolution mass spectrometry detection was developed to separate and identify a polymeric impurity in alkyl alcohol-initiated polyethylene oxide/polybutylene oxide diblock copolymer. Size exclusion chromatography was implemented in the first dimension, and gradient reversed-phase liquid chromatography using a large-pore C4 column was applied in the second dimension using an active solvent modulation valve as the interface to minimize the polymer breakthrough. The two-dimensional separation significantly reduced the complexity of the mass spectra data compared to the one-dimensional separation, and the combination of retention time and mass spectral interpretation led to the successful identification of the water-initiated triblock copolymer impurity. This identification was confirmed by comparison with the synthesized triblock copolymer reference material. A one-dimensional LC method with evaporative light scattering detection was employed to quantify the triblock impurity. The impurity level in three samples made with the different processes was determined to be in the range of 9-18 wt% using the triblock reference material as the standard.

Water-Soluble Metallo-Supramolecular Nanoreactors for Mediating Visible-Light-Promoted Cross-Dehydrogenative Coupling Reactions

Water-soluble metallo-supramolecular cages with well-defined nanosized cavities have a wide range of functions and applications. Herein, we design and synthesize two series of metallo-supramolecular octahedral cages based on the self-assembly of two congeneric truxene-derived tripyridyl ligands modified with two polyethylene glycol (PEG) chains, i.e., monodispersed tetraethylene glycol (TEG) and polydispersed PEG-1000, with four divalent transition metals (i.e., Pd, Cu, Ni, and Zn). The resulting monodispersed cages C1-C4 are fully characterized by electrospray ionization mass spectrometry (ESI-MS), nuclear magnetic resonance (NMR) spectroscopy, and single-crystal X-ray diffraction. The polydispersed cages C5-C8 display good water solubilities and can act as nanoreactors to mediate visible-light-promoted C(sp³)-C(sp²) cross-dehydrogenative coupling reactions in an aqueous phase. In particular, the most robust Pd(II)-linked water-soluble polydispersed nanoreactor C5 is characterized by ESI-MS and capable of mediating the reactions with the highest efficiencies. Detailed host-guest binding studies in conjunction with control studies suggest that these cages could encapsulate the substrates simultaneously inside its hydrophobic cavity while interacting with the photosensitizer (i.e., eosin Y).

Applications of MALDI-TOF-MS in structural characterization of synthetic polymers

In recent years, matrix assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) has been utilized to rapidly and precisely characterize the detailed molecular structures of synthetic polymers. This review summarizes recent progress regarding MALDI-TOF-MS for the characterization of synthetic polymers with a focus on specific important experimental aspects including sample preparation, the choice of matrix, the effects of cationizing agents and solvents, data processing and various applications. Finally, the recent trend of MALDI-TOF-MS development is discussed. We hope this review will be instructive for graduate students and junior users who need to use MALDI-TOF-MS as a necessary characterization technique for new synthetic polymers.

MALINTO: A New MALDI Interpretation Tool for Enhanced Peak Assignment and Semiquantitative Studies of Complex Synthetic Polymers

The newly developed MALDI interpretation tool ("MALINTO") allows for the accelerated characterization of complex synthetic polymers via MALDI mass spectrometry. While existing software provides solutions for simple polymers like poly(ethylene glycol), polystyrene, etc., they are limited in their application on polycondensates synthesized from two different kinds of monomers (e.g., diacid and diol in polyesters). In addition to such A₂ + B₂ polycondensates, MALINTO covers branched and even multicyclic polymer systems. Since the MALINTO software works based on input data of monomers/repeating units, end groups, and adducts, it can be applied on polymers whose components are previously known or elucidated. Using these input data, a list with theoretically possible polymer compositions and resulting m/z values is calculated, which is further compared to experimental mass spectrometry data. For optional semiquantitative studies, peak areas are allocated according to their assigned polymer composition to evaluate both comonomer and terminating group ratios. Several tools are implemented to avoid mistakes, for example, during peak assignment. In the present publication, the functions of MALINTO are described in detail and its broad applicability on different linear polymers as well as branched and multicyclic polycondensates is demonstrated. Fellow researchers will benefit from the accelerated peak assignment using the freely available MALINTO software and might be encouraged to explore the potential of MALDI mass spectrometry for (semi)quantitative applications.

Biodegradable Carbon Dioxide-Derived Non-Viral Gene Vectors for Osteosarcoma Gene Therapy

Osteosarcoma often occurs in children and adolescents with high invasiveness and high mortality. Polo-like kinase 1 (PLK1) overexpressed in most tumors promotes cancer cell proliferation and transformation. PLK1 is considered as a therapeutic target for osteosarcoma. RNA interference-based therapies are employed to combat osteosarcoma through silencing PLK1 gene expression. However, the treatment results remain unsatisfactory due to the lack of a safe and efficient nonviral gene vector. To tackle this hurdle, biodegradable and CO₂ -derivative cationic poly(vinylcyclohexene carbonates) (CPCHCs) are used as gene vectors to perform a siPLK1 therapeutic strategy for osteosarcoma treatment. Of those CPCHCs, CPCHC60 demonstrates the most excellent performance in gene transfection efficiency, endo-lysosome escaping, biodegradability, and biosafety. With the treatment of CPCHCs/siRNA nanoparticles, the expression level of PLK1 gene in osteosarcoma cells is significantly down-regulated. Subsequently, cells are arrested in the G₂ /M phase and subsequently dead in the form of apoptosis, resulting in significant tumor regression both in vitro and in vivo. This study brings a new insight into the development of superior nonviral gene vectors for practical cancer treatment. Based on the results, the resulting nanoparticle-based gene drug formation is considered to have a highly successful chance in further translational nanomedicine applications.

PDMAEMA from α to ω chain ends: tools for elucidating the structure of poly(2-(dimethylamino)ethyl methacrylate)

An in-depth characterization of PDMAEMA prepared by ATRP was conducted, with a focus on end group analysis. This work discusses analytical tools providing essential information about the extent of control over DMAEMA polymerization and chain extension.

High-performance micro/nanoplastics characterization by MALDI-FTICR mass spectrometry

Micro/nanoplastics (MNPs) are widespread environmental pollutants that cause high health risks. However, high heterogeneity in particle sizes and chemical compositions of MNPs make their accurate characterization extremely challenging. Herein, we established a matrix-assisted laser desorption ionization-Fourier transform ion cyclotron resonance mass spectrometry (MALDI-FTICR MS) strategy for the unambiguous characterization of different types of MNPs with high performance, including polystyrene, polyethylene glycol terephthalate, polyamide, polymethyl methacrylate, acrylonitrile butadiene styrene copolymer, and polycarbonate. The MNP sample preparation and detection conditions were systematically optimized by using response surface methodology, and the MS detection signal-to-noise ratios were improved 1.5 times on average. The ultrahigh mass resolution of FTICR MS is crucial to the unambiguous elucidation of MNP structures. We demonstrate that this MS strategy is highly efficient in the characterization of polymer constitutions of environmental MNPs derived from foam, bottles, cable ties, and compact discs, providing a promising tool for MNP detection and safety evaluation.

Precise Synthesis of Concentric Ring, Helicoid, and Ladder Metallo-Polymers with Chevron-Shaped Monomers

Molecular geometry represents one of the most important structural features and governs physical properties and functions of materials. Nature creates a wide array of substances with distinct geometries but similar chemical composition with superior efficiency and precision. However, it remains a formidable challenge to construct abiological macromolecules with various geometries based on identical repeating units, owing to the lack of corresponding synthetic approaches for precisely manipulating the connectivity between monomers and feasible techniques for characterizing macromolecules at the single-molecule level. Herein, we design and synthesize a series of tetratopic monomers with chevron stripe shape which serve as the key precursors to produce four distinct types of metallo-macromolecules with well-defined geometries, viz., the concentric hexagon, helicoid polymer, ladder polymer, and cross-linked polymer, via platinum-acetylide couplings. Concentric hexagon, helicoid, and ladder metallo-polymers are directly visualized by transmission electron microscopy, atomic force microscopy, and ultra-high-vacuum low-temperature scanning tunneling microscopy at the single-molecule level. Finally, single-walled carbon nanotubes (SWCNTs) are selected as the guest to investigate the structure-property relationship based on such macromolecules, among which the helicoid metallo-polymer shows high efficiency in wrapping SWCNTs with geometry-dependent selectivity.

Progress on the development of a metal salt-assisted ionization source for the mass spectrometric analysis of polymers

The mass spectrometric analysis of polymers has been addressed as a challenging research topic due to poor ionization and complicated analysis using conventional mass spectrometry. The ionization source has demonstrated a promising future in rapid mass spectrometric analysis. Soft ionization techniques, such as electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI) are the most ionization sources appeared to be a powerful tools for polymer characterization when combined with MS. However, they always need metal salts to be introduced during the ionization protocol for polymers due to the crucial role played by their ions (cations and anions). The current review focuses on the progress in the development of metal ion-assisted-ionization sources for the mass spectrometric analysis of polymers. Different ionization systems are comprehensively reviewed. The application of metal ion-assisted ESI, nanoESI, PSI, and MALDI-MS for polymer sample analyses is systematically discussed. The future research trends and challenges in this cutting-edge research field are summarized. It also aims to provide the current state-of-the-art of metal salts as a platform for ionization systems for the mass spectrometric characterization of polymers and offers the current challenges and perspectives on the promising future to improve analytical performance in this field. Finally, this mini-review provides a comprehensive handbook to researchers from different research backgrounds wishing to work in this area.

Maltose-functional metal-organic framework assisted laser desorption/ionization mass spectrometry for small biomolecule determination

A series of functional metal-organic frameworks (MOFs) were facilely prepared through an one-pot procedure or post-synthetic modification strategy and used as matrices in laser desorption ionization mass spectrometry (LDI-MS). Compared with traditional organic matrices and other MOFs, maltose-functional MOF MIL-101-maltose demonstrated ultrahigh ionization efficiency, free matrix background, uniform crystallization, and good dispersibility. A simple, general, and efficient LDI-MS platform was developed for rapid detection of various small biomolecules using MIL-101-maltose as matrix, providing several advantages including low sample consumption of 500 nL, short analysis time of few seconds, strong salt tolerance (500 mM NaCl), and satisfactory reproducibility. The MIL-101-maltose matrix was used for serum glucose determination and successfully distinguished the diabetic patients from the healthy controls. This work provides a generic LDI-MS platform for fast determination of small biomolecules with high potential in clinical diagnosis and disease monitoring.

Methods of PARP-1 Determination and its Importance in Living Organisms

Abstract:

PARP-1 is one of the 18 PARP enzymes that are involved in important processes at the cellular level. The most important tasks of PARP-1 are to detect and repair DNA damage and to prevent processes of apoptosis. By finding and using new strategies for marking and detecting the activity of this protein, it is possible to identify more and more tasks in which it participates. In pathological states, PARP-1 activity increases significantly. Since the 1980s, scientists have been searching for and discussing substances that may inhibit PARP-1 activity and disrupt DNA damage response pathways. In this way, unwanted cells could be destroyed. The paper presents a short description of the methods used in the determination of PARP-1 by various research groups. A critical approach to each of them was also made by pointing to the advantages and disadvantages of the described analytical methods. The literature review contains information on methods useful for PARP-1 determination, such as SPR, QCM, CL and FL, DPV, SDS-PAGE with MS, MALDI MS, Western Blot, ELISA and ATR-FTIR spectroscopy. It also includes analysis of the results of research on inhibitors that may be effective in the diagnosis and treatment of cancer and other diseases.

Cyclodextrin-Oligocaprolactone Derivatives—Synthesis and Advanced Structural Characterization by MALDI Mass Spectrometry

Cyclodextrins have previously been proven to be active in the catalysis of cyclic ester ring-opening reactions, hypothetically in a similar way to lipase-catalyzed reactions. However, the way they act remains unclear. Here, we focus on β-cyclodextrin’s involvement in the synthesis and characterization of β-cyclodextrin-oligocaprolactone (CDCL) products obtained via the organo-catalyzed ring-opening of ε-caprolactone. Previously, bulk or supercritical carbon dioxide polymerizations has led to inhomogeneous products. Our approach consists of solution polymerization (dimethyl sulfoxide and dimethylformamide) to obtain homogeneous CDCL derivatives with four monomer units on average. Oligomerization kinetics, performed by a matrix-assisted laser desorption ionization mass spectrometry (MALDI MS) optimized method in tandem with 1H NMR, revealed that monomer conversion occurs in two stages: first, the monomer is rapidly attached to the secondary OH groups of β-cyclodextrin and, secondly, the monomer conversion is slower with attachment to the primary OH groups. MALDI MS was further employed for the measurement of the ring-opening kinetics to establish the influence of the solvents as well as the effect of organocatalysts (4-dimethylaminopyridine and (–)-sparteine). Additionally, the mass spectrometry structural evaluation was further enhanced by fragmentation studies which confirmed the attachment of oligoesters to the cyclodextrin and the cleavage of dimethylformamide amide bonds during the ring-opening process.

End group analysis of poly(methylmethacrylate)s using the most abundant peak in electrospray ionization-ion mobility spectrometry-tandem mass spectrometry and Fourier transform-based noise filtering

RATIONALE

We recently developed the characterization method for synthetic polymers weighing more than a few tens of kilodalton using electrospray ionization-ion mobility spectrometry-tandem mass spectrometry, in which the m/z value of the most abundant peak was used for characterization. However, the identification of the most abundant peak from the isotopic peaks was often difficult due to the background noise.

METHODS

Here, we employed a noise reduction method using Fourier transform (FT) filtering. In the power spectrum obtained using FT of the mass spectrum of the multiple charged analytes, the significant signals in the low-frequency region and at frequency z are observed for the analytes of z charges. When the signals in both regions were used for inversed FT (i.e., the signals in other regions were zero padded), a noise-filtered mass spectrum was obtained.

RESULTS

In the analysis of poly(methylmethacrylate)s weighing 13-17 kDa, mass spectra without noise filtering with relatively high-intensity noise (than signal) were complicated to identify the most abundant peak. On the contrary, the most abundant peak was clearly identified from the mass spectra after FT-based noise filtering, and end group composition was estimated successfully.

CONCLUSIONS

The proposed FT-based noise filtering for the mass spectrum is effective to characterize multiply charged synthetic polymers weighing more than a few tens of kilodalton using electrospray ionization-ion mobility spectrometry-tandem mass spectrometry.

Boron-Catalyzed Polymerization of Phenyl-Substituted Allylic Arsonium Ylides toward Nonconjugated Emissive Materials from C3/C1 Monomeric Units

Two novel allylic arsonium ylide monomers with a phenyl (steric and electronic effect) group at different positions were synthesized and used in boron-catalyzed polymerization to produce a series of well-defined polymers, poly(2-phenyl-propenylene-co-2-phenyl-propenylidene) (P2-PhAY) and poly(3-phenyl-propenylene-co-3-phenyl-propenylidene) (P3-PhAY), with unusual structures but a controllable molecular weight and relatively low polydispersity. The backbone of these polymers consists of a mixture of C1 (chain grows by one carbon atom at a time) and C3 (chain grows by three carbon atoms at a time) monomeric units, as determined by ¹H, ¹³C, and ¹H-¹³C HSQC 2D NMR. Based on the experimental results and density functional theoretical (DFT) calculations, we were able to propose a mechanism that takes into account not only the steric hindrance, but also the electron effect of the phenyl group. In addition, a nontraditional intrinsic luminescence was observed from the nonconjugated P2-PhAY and P3-PhAY; such unexpected emission is attributed to the formation of C3-unit clusters, as evidenced by ultraviolet-visible and fluorescence spectroscopy.

Serum and urine analysis with gold nanoparticle-assisted laser desorption/ionization mass spectrometry for renal cell carcinoma metabolic biomarkers discovery

PURPOSE

Renal cell carcinoma (RCC) is a very aggressive and often fatal heterogeneous disease that is usually asymptomatic until late in the disease. There is an urgent need for RCC specific biomarkers that may be exploited clinically for diagnostic and prognostic purposes.

MATERIALS/METHODS

Serum and urine samples were collected from patients with diagnosed kidney cancer and assessed with gold nanoparticle enhanced target (AuNPET) surface assisted-laser desorption/ionization mass spectrometry (SALDI MS) based metabolomics and statistical analysis.

RESULTS

A database search allowed providing assignment of signals for the most promising features with a satisfactory value of the area under the curve and accuracy. Four potential biomarkers were found in urine and serum samples to distinguish clear cell renal cell carcinoma (ccRCC) from controls, 4 for the ccRCC with and without metastases, and 6 metabolites to distinguish low and high stages or grades.

CONCLUSIONS

This pilot study suggests that serum and urine metabolomics based on AuNPET-LDI MS may be useful in distinguishing types, grades and stages of human RCC.

High-Throughput and Combinatorial Approaches for the Development of Multifunctional Polymers

High-throughput (HT) development of new multifunctional polymers is accomplished by the combination of different HT tools established in polymer sciences in the last decade. Important advances are robotic/HT synthesis of polymer libraries, the HT characterization of polymers, and the application of spatially resolved polymer library formats, explicitly microarray and gradient libraries. HT polymer synthesis enables the generation of material libraries with combinatorial design motifs. Polymer composition, molecular weight, macromolecular architecture, etc. may be varied in a systematic, fine-graded manner to obtain libraries with high chemical diversity and sufficient compositional resolution as model systems for the screening of these materials for the functions aimed. HT characterization allows a fast assessment of complementary properties, which are employed to decipher quantitative structure-properties relationships. Moreover, these methods facilitate the HT determination of important surface parameters by spatially resolved characterization methods, including time-of-flight secondary ion mass spectrometry and X-ray photoelectron spectroscopy. Here current methods for the high-throughput robotic synthesis of multifunctional polymers as well as their characterization are presented and advantages as well as present limitations are discussed.

Mass Spectrometry Imaging of Bio-oligomer Polydispersity in Plant Tissues by Laser Desorption Ionization from Silicon Nanopost Arrays

Mass spectrometry imaging (MSI) enables simultaneous spatial mapping for diverse molecules in biological tissues. Matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) has been a mainstream MSI method for a wide range of biomolecules. However, MALDI-MSI of biological homopolymers used for energy storage and molecular feedstock is limited by, e.g., preferential ionization for certain molecular classes. Matrix-free nanophotonic ionization from silicon nanopost arrays (NAPAs) is an emerging laser desorption ionization (LDI) platform with ultra-trace sensitivity and molecular imaging capabilities. Here, we show complementary analysis and MSI of polyhydroxybutyric acid (PHB), polyglutamic acid (PGA), and polysaccharide oligomers in soybean root nodule sections by NAPA-LDI and MALDI. For PHB, number and weight average molar mass, polydispersity, and oligomer size distributions across the tissue section and in regions of interest were characterized by NAPA-LDI-MSI.

Ring opening polymerization of d,l-lactide and ε-caprolactone catalysed by (pyrazol-1-yl)copper(ii) carboxylate complexes

1,2-Bis{(3,5-dimethylpyrazol-1-yl)methyl}benzene (L) reacts with [Cu(OAc)₂] and C₆H₅COOH, 4-OH-C₆H₄COOH, 2-Cl-C₆H₄COOH and (3,5-NO₂)₂-C₆H₃COOH to afford the copper complexes [Cu₂(C₆H₅COO)₄(L)₂] (1), [Cu₂(4-OH-C₆H₄COO)₄(L)₂] (2), [Cu₂(2-Cl-C₆H₄COO)₄(L)₂]_n (3) and [Cu{(3,5-NO₂)₂-C₆H₃COO}₂L]_n (4) which are characterised by IR, mass spectrometry, elemental analyses, and X-ray crystallography. The structural data revealed two geometries that are adopted by the complexes: (i) paddle wheel in 1, 2·7H₂O, 3 and (ii) regular chains in 3 and 4. Magnetic studies show strong antiferromagnetic couplings in the paddle wheel complexes and a weak antiferromagnetic coupling in the monometallic chain one. Catalysis studies performed with these complexes (1–4) showed that they initiate ring opening polymerization (ROP) of ε-caprolactone (ε-CL) under solvent-free conditions and d,l-lactide in toluene at elevated temperatures. Polycaprolactone (PCL) and poly(d,l-lactide) (PLA) obtained from the polymerization reactions are of low molecular weights (858 for PCL and 602 Da for PLA for initiator 1) and polydispersity indices (typically 2.16 for PCL and 1.64 for PLA with 1 as the initiator). End group analysis of the polymers, determined by MALDI-ToF MS, indicates that the polymers have benzoate, hydroxyl, methoxy and cyclic end groups.

We report the synthesis, structure and complete characterization of four new pyrazolyl carboxylate-based copper(ii) complexes that catalyze the ring opening polymerization of ε-caprolactone under solvent-free conditions and of d,l-lactide in toluene.

Polyacrylonitrile-based carbon nanofibers as a matrix for laser desorption/ionization time-of-flight mass spectrometric analysis of small molecules under both positive and negative ionization modes

Carbon fiber (CNF), prepared by carbonization of electrospun polyacrylonitrile (PAN) fibers, is systematically investigated as a mediator to replace conventional organic matrices for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-MS). CNF exhibits a high salt tolerance, sensitivity, and resolution for organic matrix-free laser desorption/ionization time-of-flight mass spectrometry (LDI-MS) analysis of various analytes under both positive and negative ionization modes. Especially, saccharides, a neutral molecule having low negative ionization efficiency, are successfully detected with CNF. Taken together, this study clearly demonstrates CNF is a promising material to develop an efficient and universal platform for LDI-MS analysis regardless of preferential ionization modes of analytes. Graphical abstract.

Recent developments in pre-treatment and analytical techniques for synthetic polymers by MALDI-TOF mass spectrometry

A great deal of effort has been expended to develop accurate means of determining the properties of synthetic polymers using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS). Many studies have focused on the importance of sample pre-treatment to obtain accurate analysis results. This review discusses the history of synthetic polymer characterization and highlights several applications of MALDI-TOF MS that recognize the importance of pre-treatment technologies. The subject area is of significance in the field of analytical chemistry, especially for users of the MALDI technique. Since the 2000s, many such technologies have been developed that feature improved methods and conditions, including solvent-free systems. In addition, the recent diversification of matrix types and the development of carbon-based matrix materials are described herein together with the current status and future directions of MALDI-TOF MS hardware and software development. We provide a summary of processes used for obtaining the best analytical results with synthetic polymeric materials using MALDI-TOF MS.

The Potential of Polyethylene Terephthalate Glycol as Biomaterial for Bone Tissue Engineering

The search for materials with improved mechanical and biological properties is a major challenge in tissue engineering. This paper investigates, for the first time, the use of Polyethylene Terephthalate Glycol (PETG), a glycol-modified class of Polyethylene Terephthalate (PET), as a potential material for the fabrication of bone scaffolds. PETG scaffolds with a 0/90 lay-dawn pattern and different pore sizes (300, 350 and 450 µm) were produced using a filament-based extrusion additive manufacturing system and mechanically and biologically characterized. The performance of PETG scaffolds with 300 µm of pore size was compared with polycaprolactone (PCL). Results show that PETG scaffolds present significantly higher mechanical properties than PCL scaffolds, providing a biomechanical environment that promotes high cell attachment and proliferation.

Metallo-Helicoid with Double Rims: Polymerization Followed by Folding by Intramolecular Coordination

In this study, we established a feasible strategy to construct a new type of metallo-polymer with helicoidal structure through the combination of covalent polymerization and intramolecular coordination-driven self-assembly. In the design, a tetratopic monomer (M) was prepared with two terminal alkynes in the outer rim for polymerization, and two terpyridines (TPYs) in the inner rim for subsequent folding by selective intramolecular coordination. Then, the linear covalent polymer (P) was synthesized by polymerization of M via Glaser-Hay homocoupling reaction. Finally, intramolecular coordination interactions between TPYs and Zn(II) folded the backbone of P into a right- or left-handed metallo-helicoid (H) with double rims. Owing to multiple positive charges on the inner rim of helicoid, double-stranded DNA molecules (dsDNA) could interact with H through electrostatic interactions. Remarkably, dsDNA allowed exclusive formation of H with right handedness by means of chiral induction.

Detection challenges in quantitative polymer analysis by liquid chromatography

Accurate quantification of polymer distributions is one of the main challenges in polymer analysis by liquid chromatography. The response of contemporary detectors is typically influenced by compositional features such as molecular weight, chain composition, end groups, and branching. This renders the accurate quantification of complex polymers of which there are no standards available, extremely challenging. Moreover, any (programmed) change in mobile-phase composition may further limit the applicability of detection techniques. Current methods often rely on refractive index detection, which is not accurate when dealing with complex samples as the refractive-index increment is often unknown. We review current and emerging detection methods in liquid chromatography with the aim of identifying detectors, which can be applied to the quantitative analysis of complex polymers.

Synthesis and Characterization of Copoly(Ether Sulfone)s with Different Percentages of Diphenolic Acid Units

New functionalized Poly(ether sulfone)s having different molar ratio (10, 20, 30, 50, 70, 100 mol%) of 4,4-bis phenoxy pentanoic acid unit (diphenolic acid; DPA) units were synthesized and characterized by (1H and 13C)-NMR, MALDI-TOF MS, FT-IR, DSC and DMA analyses. The microstructural analysis of the copolymers, obtained by 13C-NMR using an appropriate statistical model, shows a random distribution of copolymer sequences, as expected. The presence of different amount of DPA units along the polymer chains affects the chemical and physical properties of the copolymers. The Tg and the contact angle values decrease as the molar fraction of DPA units increases, whereas the hydrophilicity increases. NMR and MALDI-TOF MS analyses show that all polymer chains are almost terminated with hydroxyl and chlorine as end groups. The presence of cyclic oligomers was also observed by MALDI-TOF MS analysis.