Cerium doped magnetite nanoparticles for highly sensitive detection of metronidazole via chemiluminescence assay

Mesoporous cobalt-manganese layered double hydroxides promote the activation of calcium sulfite for degradation and detoxification of metronidazole

Metronidazole (MNZ), a commonly used antibiotic, poses risks to water bodies and human health due to its potential carcinogenic, mutagenic, and genotoxic effects. In this study, mesoporous cobalt-manganese layered double hydroxides (CoxMny-LDH) with abundant oxygen vacancies (Ov) were successfully synthesized using the co-precipitation method and used to activate calcium sulfite (CaSO3) with slight soluble in water for MNZ degradation. The characterization results revealed that Co2Mn-LDH had higher specific areas and exhibited good crystallinity. Co2Mn-LDH/CaSO3 exhibited the best catalytic performance under optimal conditions, achieving a remarkable MNZ degradation efficiency of up to 98.1 % in only 8 min. Quenching experiments and electron paramagnetic resonance (EPR) tests showed that SO4•- and 1O2 played pivotal roles in the MNZ degradation process by activated CaSO3, while the redox cycles of Co2+/Co3+ and Mn3+/Mn4+ on the catalyst surface accelerated electron transfer, promoting radical generation. Three MNZ degradation routes were put forward based on the density functional theory (DFT) and liquid chromatography-mass spectrometer (LC-MS) analysis. Meanwhile, the toxicity analysis result demonstrated that the toxicity of intermediates post-catalytic reaction was decreased. Furthermore, the Co2Mn-LDH/CaSO3 system displayed excellent stability, reusability, and anti-interference capability, and achieved a comparably high removal efficiency across various organic pollutant water bodies. This study provides valuable insights into the development and optimization of effective heterogeneous catalysts for treating antibiotic-contaminated wastewater.

Quantification strategy of absolute chemiluminescence efficiency for systems of luminol with hydrogen peroxide

An important feature to be determined in mechanistic studies on chemiluminescence (CL) is its quantum efficiency, which can give significant chemical reaction information on the influence of the reactant structures and reaction conditions. However, most of the previous quantitative measurements of luminescence and quantum efficiencies are complex and incomplete. To overcome the inconvenience and underestimated quantum efficiency in each measurement, we report a simple and highly effective strategy to determine the absolute CL quantum efficiencies for three systems of luminol with hydrogen peroxide by means of a spectrometer along with an integrating sphere. The integrating sphere facilitated collection of all the emitted light and then transferred it to the spectrometer via an optical fiber proportionally. The CL quantum efficiency was determined by taking the ratio of total photons generated in the reaction system to the number of the limiting reactant molecules consumed. Absolute CL efficiencies of three luminol-H2O2 reaction systems with varied reactant concentrations or coreactants were found to be 37 %, 7.0 % and 6.6 % in a time course, which are much higher than those previously reported values of 1.0-1.3 %. Due to our complete photon collection design, a higher absolute CL efficiency can be realized. Furthermore, spooling CL spectra also provided a powerful visualization tool to observe the real-time CL evolution and devolution, allowing the study on kinetics of CL reaction systems. The above investigations are anticipated to promote further development of CL methodologies and their applications.

Inner filter effect-based near-infrared fluorescent probe for detection of metronidazole on a smartphone-integrated analytical platform

Antibiotic residues pose a serious threat to ecosystems and food safety. Developing convenient, visual, and on-site detection methods is therefore in high demand and has a practical purpose. In this work, a near-infrared (NIR) fluorescent probe with an analysis platform based on a smartphone has been constructed for quantitative and on-site detection of metronidazole (MNZ). CdTe quantum dots with NIR emission at 710 nm (QD710) were prepared by using a simple hydrothermal method and showed good properties. A spectral overlap between absorption of MNZ and excitation of QD710 resulted in an effective inner filter effect (IFE) between QD710 and MNZ. Because of the IFE, the fluorescence of QD710 decreased gradually with increasing concentrations of MNZ. Based on the fluorescence response, quantitative detection and visualization of MNZ was achieved. NIR fluorescence analysis and the special IFE between probe and target can improve sensitivity and selectivity for MNZ. Additionally, these were also utilized for quantitative detection of MNZ in real food samples and the results were reliable and satisfactory. Meanwhile, a portable visual analysis platform in a smartphone was constructed for on-site analysis of MNZ, which can be used as an alternative method for detection of MNZ residues in situations with limited instrumental conditions. Therefore, this work provides a convenient, visual, and real-time analysis method for detection of MNZ and the analysis platform shows great potential for commercialization.

Enhancement of electrode properties using carbon dots functionalized magnetite nanoparticles for azo dye decolorization in microbial fuel cell

Technology integration of nanomaterials with microbial fuel cell (MFC) have led to simultaneous degradation of recalcitrant dyes and energy extraction from textile wastewater. Limited electron transfer capacity and hydrophobicity of electrode are the bottlenecks for enhancing the performance of MFC. Nanomaterials can provide surface functionalities for electron transfers and serve as catalyst for pollutant degradation. In this paper, magnetite nanoparticles functionalized with carbon dots (Fe₃O₄@CDs) were used to enhance the electron transfer capacity of the electrodes due to numerous surface-active functional groups of CDs and the reversible redox reaction of Fe²⁺/Fe³⁺. Polydopamine (PDA) was used as binder to coat Fe₃O₄@CDs onto the surface of carbon felt (CF) electrodes in a sono-chemical reaction, favoring to form biocompatible electrodes. Charge transfer resistance of Fe₃O₄@CDs@PDA-CF was 5.02Ω as compared to 293.34Ω of unmodified CF. Fe₃O₄@CDs@PDA-CF installed MFC could achieve almost 98% dye degradation efficiency within 48 h and 18.30 mW m^-2 power output as compared to 77% dye degradation and 0.34 mW m^-2 power output by unmodified CF electrode MFC. Moreover, metagenomic analysis of microbial consortia developed in Fe₃O₄@CDs@PDA-CF MFC showed enrichment of electrogenic and dye degrading microbial communities of Achromobacter. Delftia, Geobacter and Pseudomonas.

Recent developments in microfluidic paper-based analytical devices for pharmaceutical analysis

In the last decade, due to the global increase in diseases, drugs for biomedical applications have increased dramatically. Therefore, there is an urgent need for analytical tools to monitor, treat, investigate, and control drug compounds in diverse matrices. The new and challenging task has been looking for simple, low-cost, rapid, and portable analytical platforms. The development of microfluidic paper-based analytical devices (µPADs) has garnered immense attention in many analytical applications due to the benefit of cellulose structure. It can be functionalized and serves as an ideal channel and scaffold for the transportation and immobilization of various substances. Microfluidic technology has been considered an effective tool in pharmaceutical analysis that facilitates the quantitative measurement of several parameters on cells or other biological systems. The µPADs represent unique advantages over conventional microfluidics, such as the self-pumping capability. They have low material costs, are easy to fabricate, and do not require external power sources. This review gives an overview of the current designs in this decade for µPADs and their respective application in pharmaceutical analysis. These include device designs, choice of paper material, and fabrication techniques with their advantages and drawbacks. In addition, the strategies for improving analytical performance in terms of simplicity, high sensitivity, and selectivity are highlighted, followed by the application of µPADs design for the detection of drug compounds for various purposes. Moreover, we present recent advances involving µPAD technologies in the field of pharmaceutical applications. Finally, we discussed the challenges and potential of µPADs for the transition from laboratory to commercialization.

Lignosulfonate valorization into a Cu-containing magnetically recyclable photocatalyst for treating wastewater pollutants in aqueous media

This study presents an eco-friendly and economical process for preparing a magnetic copper complex conjugated to modified calcium lignosulfonate (LS) through a diamine (Fe₃O₄@LS@naphthalene-1,5-diamine@copper complex; FLN-Cu) as a green and novel catalyst. The prepared catalyst was characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), Brunauer-Emmett-Teller (BET), energy-dispersive X-ray spectroscopy (EDS), elemental mapping, inductively coupled plasma-optical emission spectrometry (ICP-OES) and field emission scanning electron microscopy (FESEM) techniques. The photocatalytic performance of the synthesized FLN-Cu catalyst was investigated by the degradation of aqueous solutions of dyes such as Rhodamine B (RhB), methylene blue (MB), and Congo red (CR) under UV irradiation. The dye degradation was followed by UV-Vis (ultraviolet-visible) spectrophotometry by measuring the changes in absorbance. The effects of different factors such as pH, contact time, photocatalyst dosage, and initial concentration of dye on the adsorption percentage were also investigated. Moreover, the catalyst showed high stability and could be readily separated from the reaction media using a magnet and reused five times without a remarkable loss of catalytic ability.

Removal of antibiotics from wastewaters by membrane technology: Limitations, successes, and future improvements

Antibiotics and related pharmaceuticals are applied to enhance public health and life quality. A major environmental concern is wastewaters from pharmaceutical industries, which contain significant amounts of antibiotics. Pharmaceutical industries apply conventional processes (biological, filtration, coagulation, flocculation, and sedimentation) for wastewater treatment, but these approaches cannot remove antibiotics completely. Moreover, unmetabolized antibiotics released by humans and animals are dangerous for municipal and effluent wastewater. Besides, antibiotic resistance is another challenge in treatment of wastewater for superbugs. This comprehensive study summarizes different techniques for antibiotic removal with an emphasis on membrane technology in individual and hybrid systems such as chemical, physical, biological, and conditional-based strategies. A combination of membrane processes with advanced oxidation processes (AOPs), adsorption, and biological treatments can be the right solution for perfect removal. Furthermore, this review briefly compares different procedures for antibiotic removal, which can be helpful for further studies with their advantages and drawbacks.

An electrochemical sensor for detection of trace-level endocrine disruptor bisphenol A using Mo2Ti2AlC3 MAX phase/MWCNT composite modified electrode

Bisphenol A (BPA) is an industrially preferred material for the production of plastic and polycarbonate as well as a used material for the interior of food and beverage cans. In this study, synthesis and electrochemical sensor application of Mo₂Ti₂AlC₃/MWCNT (multi-walled carbon nanotube) nanocomposite for BPA sensing was evaluated. Mo₂Ti₂AlC₃ was used as MAX phase material in the design of the sensor, and MWCNT was preferred to increase conductivity and sensitivity. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to determine Mo₂Ti₂AlC₃/MWCNT nanocomposite's electrochemical sensor performances which had LOD of 2.7 nM and LOQ of 8.91 nM in the linear working range of 0.01-8.50 μM calculated from DPV. The composite showed a single oxidation step against BPA which is diffusion-controlled and irreversible. The sensor was successfully applied for the determination of BPA in milk pack, plastic bottle, and can with recoveries ranging from 95.67% to 100.60%. In addition, sensor performance was examined through selectivity, repeatability, and reusability studies. HPLC as a standard determination method was carried out for accuracy of the voltammetric determination method in the real samples. The developed sensor could be applied to different areas from industry quality control to clinical analysis for the detection of BPA.

Smart active-targeting of lipid-polymer hybrid nanoparticles for therapeutic applications: Recent advances and challenges

The advances in producing multifunctional lipid-polymer hybrid nanoparticles (LPHNs) by combining the biomimetic behavior of liposomes and architectural advantages of polymers have provided great opportunities for selective and efficient therapeutics delivery. The constructed LPHNs exhibit different therapeutic efficacies for special uses based on characteristics of different excipients. However, the high mechanical/structural stability of hybrid nano-systems could be viewed as both a negative property and a positive feature, where the concomitant release of drug molecules in a controllable manner is required. In addition, difficulties in scaling up the LPHNs production, due to involvement of several criteria, limit their application for biomedical fields, especially in monitoring, bioimaging, and drug delivery. To address these challenges bio-modifications have exhibited enormous potential to prepare reproducible LPHNs for site-specific therapeutics delivery, diagnostic and preventative applications. The ever-growing surface bio-functionality has provided continuous vitality to this biotechnology and has also posed desirable biosafety to nanoparticles (NPs). As a proof-of-concept, this manuscript provides a crucial review of coated lipid and polymer NPs displaying excellent surface functionality and architectural advantages. We also provide a description of structural classifications and production methodologies, as well as the biomedical possibilities and translational obstacles in the development of surface modified nanocarrier technology.

Modifying the magnetic response of magnetotactic bacteria: incorporation of Gd and Tb ions into the magnetosome structure

Magnetotactic bacteria Magnetospirillum gryphiswaldense MSR-1 biosynthesise chains of cube-octahedral magnetosomes, which are 40 nm magnetite high quality (Fe₃O₄) nanoparticles. The magnetic properties of these crystalline magnetite nanoparticles, which can be modified by the addition of other elements into the magnetosome structure (doping), are of prime interest in a plethora of applications, those related to cancer therapy being some of the most promising ones. Although previous studies have focused on transition metal elements, rare earth (RE) elements are very interesting as doping agents, both from a fundamental point of view (e.g. significant differences in ionic sizes) and for the potential applications, especially in biomedicine (e.g. magnetic resonance imaging and luminescence). In this work, we have investigated the impact of Gd and Tb on the magnetic properties of magnetosomes by using different complementary techniques. X-ray diffraction, transmission electron microscopy, and X-ray absorption near edge spectroscopy analyses have revealed that a small amount of RE ions, ∼3-4%, incorporate into the Fe₃O₄ structure as Gd³⁺ and Tb³⁺ ions. The experimental magnetic characterisation has shown a clear Verwey transition for the RE-doped bacteria, located at T ∼ 100 K, which is slightly below the one corresponding to the undoped ones (106 K). However, we report a decrease in the coercivity and remanence of the RE-doped bacteria. Simulations based on the Stoner-Wohlfarth model have allowed us to associate these changes in the magnetic response with a reduction of the magnetocrystalline (K _C) and, especially, the uniaxial (K _uni) anisotropies below the Verwey transition. In this way, K _uni reaches a value of 23 and 26 kJ m^-3 for the Gd- and Tb-doped bacteria, respectively, whilst a value of 37 kJ m^-3 is obtained for the undoped bacteria.

A sensitive colori/fluorimetric nanoprobe for detection of polyphenols using peroxidase-mimic plasma-modified MoO3 nanoparticles

Herein, MoO₃ nanoparticles were synthesized and modified using Argon cold plasma treatment (Ar-MoO₃NPs) for the first time. Various characterization studies were performed using various methods, including SEM, XRD, and FTIR techniques. The catalytic activity of MoO₃NPs before and after modification was investigated using fluorometric and colorimetric experiments. The results indicated that the enzyme-mimic activity of MoO₃NPs increased after plasma-surface modification (1.5 fold). Also, a fluorometric method based on the oxidation of a non-fluorescent terephthalic acid by Ar-MoO₃NPs in the presence of H₂O₂ and the production of a compound with a high emission was designed for polyphenols detection. Quercetin was used as a polyphenol standard for the optimization of the proposed system. Under the optimum conditions, the dynamic ranges of the calibration graphs and the detection limits were calculated for different polyphenols (μmol/L): quercetin (2-232, 12.22), resveratrol (2-270, 61.89), curcumin (39-400, 38.89), gallic acid (2-309, 21.5) and ellagic acid (39-309, 16.25). Also, the precision of the method, which was expressed as RSD%, was in the range of 0.286-1.19%. The proposed system could detect individual polyphenols and total polyphenols in three different fruit extracts (apple, orange, and grapes) with high sensitivity. The obtained total concentrations of polyphenols in real samples were comparable to those calculated by the spectrophotometric method. So, a novel and sensitive optical nanosensor for the detection of polyphenols was reported as an alternative to the routine Folin-Ciocalteu spectrophotometric technique.

The Antioxidant Effect of the Metal and Metal-Oxide Nanoparticles

Inorganic nanoparticles, such as CeO₃, TiO₂ and Fe₃O₄ could be served as a platform for their excellent performance in antioxidant effect. They may offer the feasibility to be further developed for their smaller and controllable sizes, flexibility to be modified, relative low toxicity as well as ease of preparation. In this work, the recent progress of these nanoparticles were illustrated, and the antioxidant mechanism of the inorganic nanoparticles were introduced, which mainly included antioxidant enzyme-mimetic activity and antioxidant ROS/RNS scavenging activity. The antioxidant effects and the applications of several nanoparticles, such as CeO₃, Fe₃O₄, TiO₂ and Se, are summarized in this paper. The potential toxicity of these nanoparticles both in vitro and in vivo was well studied for the further applications. Future directions of how to utilize these inorganic nanoparticles to be further applied in some fields, such as medicine, cosmetic and functional food additives were also investigated in this paper.

High-efficiency application of CTS-Co NPs mimicking peroxidase enzyme on TMB(ox)

In this study, analytical studies of Chitosan-Cobalt(II) (CTS-Co(II)) nanoparticles (CTS - Co NPs) by mimicking horseradish peroxidase (HRP) were evaluated. In the applications, it was observed that CTS-Co NPs 3,3' 5,5' tetramethylbenzidine (TMB) oxidized in the presence of hydrogen peroxide (H₂O₂). The required CTS-Co NPs were synthesized at 50 °C in 30 min and characterized using Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and X-ray photon spectroscopy (XPS) was done. CTS-Co NPs were studied to develop a selective TMB biosensor on TMB(ox) substrate. The synthesized CTS-Co NPs formed a catalytic reaction with 30% 0.2 mM H₂O₂ on 0.2 M TMB substrate. After the catalytic reaction, sensitive signals were obtained from the desired biosensor. Electrochemical measurements were taken as low limit of 10 mg and a high limit of 20 mg for the determination of CTS-Co NPs to TMB(ox). In the microplate study; The sensors were applied on 1.5 μg and 3 μg CTS-Co NPs TMB(ox) substrate, respectively. CTS- Co NPs; for TMB(ox) determination, optical density (OD) measurement was taken as a low limit of 1.5 μg and a high limit of 3 μg. Electrochemical applications of particles and microplate reader results were compared with horseradish peroxidase (HRP) enzyme for sensor properties. According to the data obtained, it was observed that it behaved similarly to the CTS-Co NPs peroxidase enzyme. This work presents innovations for nanoparticle extraction and sensor study from chitosan and other naturally sourced polymers.

Enzymeless voltammetric sensor for simultaneous determination of parathion and paraoxon based on Nd-based metal-organic framework

The aim of this work is to fabricate a sensitive and novel enzymeless electrochemical sensor for the simultaneous determination of parathion and paraoxon using the Nd-UiO-66@MWCNT nanocomposite. For this purpose, Neodymium (Nd) was introduced into a Universitetet i Oslo (UiO-66) structure to construct Nd-UiO-66 and then, adding multi-walled carbon nanotubes to the Nd-UiO-66 to increase the electrocatalytic activity and surface area of the obtained composite. The Nd-UiO-66@MWCNT has numerous advantages like excellent conductivity, tunable texture, and large surface area and can be used as a distinctive structure for the construction of modified glassy carbon electrode (GCE) to enhance the charge-transfer and the efficiency of electrochemical sensors. This modified electrode showed sensitive and selective determination of paraoxon and parathion over the linear ranges of 0.7-100 and 1-120 nM, with detection limits of 0.04 and 0.07 nM, respectively. The proposed Nd-UiO-66@MWCNT/GCE sensor in this study can be applied in environmental and toxicological laboratories and field tests to detect parathion and paraoxon levels.

Dual enzymes-mimic activity of nanolayered manganese-calcium oxide for fluorometric determination of metformin

There are different analytical methods available for the determination of metformin, as an oral hypoglycemic and antidiabetic drug, in biological samples. However, most of these methods suffer from some drawbacks, including high-priced materials and equipment, damaging chemical reagents, time-consuming nature, and tedious operation procedures. So, in this work a new, sensitive and simple method was reported for the detection of metformine. In this regard, nanolayered manganese-calcium oxide (NL-MnCaO₂) were synthesized and characterized using scanning electron microscopy (SEM), fourier transform infrared (FTIR) spectroscopy, and X-ray powder diffraction (XRD) techniques. Also, we studied the enzyme-like activity of synthesized particles and reported a bifunctional nanozyme, which performs the dual roles for peroxidase and catalase-mimicking. The results demonstrated the hindering effect of metformin on the peroxidase-mimic activity of NL-MnCaO₂ and this effect was increased by raising metformin concentration. So, a sensitive fluorometric detection system was designed for the analytical assay of metformin, based on the terephthalic acid (TA)-H₂O₂ reaction with NL-MnCaO₂. An acceptable linearity was observed between the metformin concentration and fluorescence quenching of the system in the range of 0.07-0.77 mM. Limit of detection (LOD) and limit of quantification (LOQ) were 0.17 μM and 0.96 μM, respectively. The proposed system was applied for the estimation of metformin concentration in serum samples by recoveries of 86.68-106%. So, the proposed fluorometric method provides some main advantages such as wide linear range, low detection limit, rapid detections, high sensitivity, and good practicability for the determination of metformin in biological samples.

A sensitive, fast, selective, and reusable enzyme-free glucose sensor based on monodisperse AuNi alloy nanoparticles on activated carbon support

In this study, a glucose sensor modified with activated carbon supported gold-nickel (AuNi@AC) metal nanoparticles was prepared for the early diagnosis of diabetes. Electrochemical tests were carried out by determining the optimum working conditions of the prepared glucose sensor. The characterization analyses of the designed glucose sensor were performed by Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy (XPS) and Raman Spectroscopy. It was determined that the average particle size of the nanoparticles in the AuNi alloy structure was 2.03 ± 0.37 nm. The determined detection limit of the AuNi@AC nanosensor was calculated as 0.41 μM as a result of the high linear range provided up to 1.7 mM. In addition, the sensitivity of AuNi@AC nanosensor to glucose, which has a high sensitivity value of 1955 μA mM^-1 cm^-2, was determined.

Glucose nano biosensor with non-enzymatic excellent sensitivity prepared with nickel-cobalt nanocomposites on f-MWCNT

NiCo (Nickel-cobalt) nanoparticles were obtained by the chemical reduction method on functionalized multi-walled carbon nanotubes. After this process, chronoamperometry, cyclic voltammetry, and amperometric methods were used to investigate the electrochemical and electrocatalytic behavior of NiCo@f-MWCNT against glucose oxidation. In addition, the NiCo@f-MWCNT nanocomposites were analyzed by characterization techniques such as X-Ray Diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Transmission Electron Microscopy (TEM), and Atomic Force Microscopy (AFM) in terms of the morphological and atomic structure of prepared nanomaterials. The sensitivity and limit of detection the non-enzymatic glucose sensor (NiCo@f-MWCNT) were calculated as 10,015 μA/mM^-1 cm^-2 0.26 μM, respectively. As a result of these studies and experiments, the NiCo@f-MWCNT nanocomposite is a really good sensor and their stability showed that the current nanomaterials expressed to be new material for the electrochemical detection of glucose.

Effect of process parameters over carbon-based ZIF-62 nano-rooted membrane for environmental pollutants separation

The paper evaluates the routes towards the evaluation of membranes using ZIF-62 metal organic framework (MOF) nano-hybrid dots for environmental remediation. Optimization of interaction of operating parameters over the rooted membrane is challenging issue. Subsequently, the interaction of operating parameters including temperature, pressure and CO₂ gas concentration over the resultant rooted membranes are evaluated and optimized using response surface methodology for environmental remediation. In addition, the stability and effect of hydrocarbons on the performance of the resulting membrane during the gas mixture separation are evaluated at optimum conditions to meet the industrial requirements. The characterization results verified the fabrication of the ZIF-62 MOF rooted composite membrane. The permeation results demonstrated that the CO₂ permeability and CO₂/CH₄ selectivity of the composite membrane was increased from 15.8 to 84.8 Barrer and 12.2 to 35.3 upon integration of ZIF-62 nano-glass into cellulose acetate (CA) polymer. Subsequently, the optimum conditions have been found at a temperature of 30 °C, the pressure of 12.6 bar and CO₂ feed concentration of 53.3 vol%. These optimum conditions revealed the highest CO₂ permeability, CH₄ permeability and CO₂/CH₄ separation factor of 47.9 Barrer, 0.2 Barrer and 26.8. The presence of hydrocarbons in gas mixture dropped the CO₂ permeability of 56.5% and separation factor of 46.4% during 206 h of testing. The separation performance of the composite membrane remained stable without the presence of hydrocarbons for 206 h.

Determination of Salicylic Acid Using a Highly Sensitive and New Electroanalytical Sensor

Background:

A drug sensor (salicylic acid, in this case) was designed and made up of this research. The senor was made by modification of paste electrode (MPE) with CuO-SWCNTs and 1-hexyl-3-methylimidazolium chloride (HMICl). The MPE/CuO-SWCNTs/HMICl showed catalytic activity for the oxidation signal of salicylic acid in phosphate buffer solution.

Methods:

Electrochemical methods were used as a powerful strategy for the determination of salicylic acid in pharmaceutical samples. Aiming at this goal, carbon paste electrode was amplified with conductive materials and used as a working electrode.

Results:

The MPE/CuO-SWCNTs/HMICl was used for the determination of salicylic acid in the concentration range of 1.0 nM – 230 µM using differential pulse voltammetric (DPV) method. At pH=7.0, as optimum condition, the MPE/CuOSWCNTs/HMICl displayed a high-quality ability for the determination of salicylic acid in urine, pharmaceutical serum, and water samples.

Conclusion:

The MPE/CuO-SWCNTs/HMICl was successfully used as a new and high performance working electrode for the determination of salicylic acid at a nanomolar level and in real samples.

Recent Advantages of Mediator Based Chemically Modified Electrodes; Powerful Approach in Electroanalytical Chemistry

Background:

Modified electrodes have advanced from the initial studies aimed at understanding electron transfer in films to applications in areas such as energy production and analytical chemistry. This review emphasizes the major classes of modified electrodes with mediators that are being explored for improving analytical methodology. Chemically modified electrodes (CMEs) have been widely used to counter the problems of poor sensitivity and selectivity faced in bare electrodes. We have briefly reviewed the organometallic and organic mediators that have been extensively employed to engineer adapted electrode surfaces for the detection of different compounds. Also, the characteristics of the materials that improve the electrocatalytic activity of the modified surfaces are discussed.

Objective:

Improvement and promotion of pragmatic CMEs have generated a diversity of novel and probable strong detection prospects for electroanalysis. While the capability of handling the chemical nature of the electrode/solution interface accurately and creatively increases , it is predictable that different mediators-based CMEs could be developed with electrocatalytic activity and completely new applications be advanced.

Properties and Recent Advantages of N,N’-dialkylimidazolium-ion Liquids Application in Electrochemistry

:

N,Nʹ-dialkylimidazolium-ion liquids is one of the important ionic liquids with a wide range of application as conductive electrolyte and in electrochemistry. The modified electrodes create a new view in fabrication of electroanalytical sensors. Many modifiers have beeen suggested for modification of electroanalytical sensor since many years ago. Over these years, ionic liquids and especially room temperature ionic liquids have attracted more attention due to their wide range of electrochemical windows and high electrical conductivity. N,Nʹ-dialkylimidazolium-ion liquids are one of the main important ionic liquids suggested for modification of bare electrodes and especially carbon paste electrodes. Although many review articles have reported onthe use of ionic liquids in electrochemical sensors, no review article has been specifically introduced so far on the review of the advantages of N,Nʹ-dialkylimidazolium ionic liquid. Therefore, in this review paper we focused on the introduction of recent advantages of N,Nʹ-dialkyl imidazolium ionic liquid in electrochemistry.

Cation Crosslinking-Induced Stable Copper Nanoclusters Powder as Latent Fingerprints Marker

Luminescent copper nanoclusters (Cu NCs) have shown great potential in light-emitting devices (LEDs), chemical sensing, catalysis and biological fields. However, their practical use has been restricted by poor stability, and study on the stability of Cu NCs solid powder along with the mechanism is absent. In this study, stablized Cu NCs powder was first obtained by cation crosslinking method. Compared with the powder synthesized by solvent precipitation method, the stability of Cu NCs powder crosslinked by ionic inducer Ce3+ was enhanced around 100-fold. The storage time when the fluorescence intensity decreased to 85% (T85) was improved from 2 h to 216 h, which is the longest so far. The results of characterizations indicated that the aggregation structure was formed by the binding of Ce3+ with the capping ligands of Cu NCs, which helped in obtaining Ce-Cu NCs powder from aggregate precipitation in solution. Furthermore, this compact structure could avoid the destruction of ambient moisture resulting in long-lasting fluorescence and almost unchanged physical form. This demonstrated that phosphor, with excellent characteristics of unsophisticated synthesis, easy preservation and stable fluorescence, showed great potential in light sources, display technology and especially in latent fingerprints visualization on different substrates for forensic science.

Magnetic covalent organic framework immobilized gold nanoparticles with high-efficiency catalytic performance for chemiluminescent detection of pesticide triazophos

Covalent organic frameworks (COFs) are considered to be a promising support material for catalyst due to their highly ordered porous structure. Here, a core-shell structured Fe₃O₄ magnetic covalent organic framework (Fe₃O₄@COF) was synthesized and employed to provide basic sites for immobilization of gold nanoparticles (AuNPs). The AuNPs was in-situ immobilized on the shell of Fe₃O₄@COF via a citrate reducing method. The Fe₃O₄@COF-AuNP had convenient magnetic separability and exhibited excellent mimicking peroxidase-like activity in catalyzing chemiluminescence (CL) reaction of luminol with hydrogen peroxide (H₂O₂). With acetylcholine chloride (ACh) as substrate of acetylcholinesterase (AChE), a CL method was exploited for sensitive detection of organophosphorus pesticide triazophos due to its irreversible inhibiting effect on the AChE activity and subsequently influences the production of H₂O₂ under the condition of choline oxidase (ChOx). This method gave a good linearity for triazophos in the range of 5.0-300.0 nmol L^-1, and a limit of detection (LOD) of 1 nmol L^-1 was acquired. The applicability of this method was verified by the determination of triazophos in different spiked vegetable samples.

CuS nanoparticles-enhanced luminol-O2 chemiluminescence reaction used for determination of paracetamol and vancomycin

A new chemiluminescence (CL) method was proposed to measure two widely used drugs, including paracetamol (PCM) and vancomycin (VAN). The CL reaction used was the CuS nanoparticles (CuS NPs)-luminol-O₂ system. In this system, CuS NPs played the role of catalyst and increased the CL intensity. CuS NPs were easily synthesized by quick-precipitation. CuS NPs were characterized by spectroscopic techniques, and the mean size of NPs was estimated to be about 9 nm. In the developed CL methods, PCM and VAN decreased the CL intensity. In the proposed method, the linear concentration ranges were 4.0 × 10^-5-4.0 × 10^-4 mol L^-1 of PCM and 2.0 × 10^-5-6.0 × 10^-4 mol L^-1 of VAN. The limit of detections were 2.9 × 10^-5 mol L^-1 and 8.9 × 10^-6 mol L^-1 for PCM and VAN, respectively. The relative standard deviations (RSD) of the CL method were 2.99 and 4.31 (n = 6) for the determination of 3.0 × 10^-4 mol L^-1 PCM and VAN, respectively. It was also shown that the CL methods can measure PCM and VAN concentrations in various real samples.

Development of dipodal fluorescence sensor of iron for real samples based on pyrene modified anthracene

A novel pyrene modified anthracene dipodal sensor was prepared by a simple synthetic method for the sensitive determination of iron ions in real samples. The chemical characterization analyses including nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry were carried out to characterize the target fluorescent sensor. Photophysical and electrochemical behaviors of the sensor were studied by the absorption, excitation-emission matrix analysis, steady-state fluorescence, three-dimensional fluorescence, and cyclic and square wave voltammetry, respectively. The fluorescent sensor properties were evaluated via Ultraviolet-visible and fluorescence spectroscopies. According to obtained results, the fluorescence signal of the sensor was selectively quenched with interaction with Fe³⁺ ions. The spectrofluorimetric determination of iron, in real water and medicine samples were successfully carried out under optimized experimental conditions. A detection limit and linear working range were calculated as 0.265 μM and 0.275-55.000 μM, respectively which demonstrated the ability of the simple and sensitive sensor for slight amounts of iron. The obtained detection limit for iron determination with the presented novel fluorescent sensor was less than nearly 20 times the tolerance limit (5.40 µM) in drinking water that was determined by the United States Environmental Protection Agency. The accuracy of the newly developed method was evaluated by Inductively coupled plasma optical emission spectroscopy and spike/recovery test which demonstrated that the developed fluorescent sensor has high accuracy for fast, easy and accessible determination of iron at 95% confidence level.

A cucurbit[7]uril-based supramolecular fluorescent probe for the detection of metronidazole with high sensitivity and strong anti-interference capacity

We propose a new method for the selective detection of the antibiotic metronidazole (MNZ) using CB[7]-JAT (cucurbit[7]uril = CB[7] and JAT = jatrorrhizine) as a fluorescent probe, which is based on the competitive reaction between MNZ and JAT for the occupancy of the CB[7] cavity. The proposed method gives a good calibration curve in the concentration range of 0.38–60 μM, and the limit of detection for MNZ is 65 ng mL−1 with those obtained by the standard curve method. Moreover, the proposed method was successfully applied for the determination of MNZ in liquid milk. Most importantly, due to the high binding affinity between CB[7] and MNZ, the proposed method shows great anti-interference capacity to accurately detect MNZ in the presence of other antibiotics.

A new enhanced chemiluminescence reaction based on polymer dots for the determination of metronidazole

Polymer dots (PDs) with non-conjugated functional groups are attracting nanomaterials due to their ease of synthesis, the biocompatibility of precursors, and low toxicity. In this work, PDs with non-conjugated groups were synthesized with a simple and straightforward method by Schiff base reaction. Then their possible application in the chemiluminescence (CL) reactions was explored. Results were shown that PDs increased the CL intensity of the NaIO₄-fluorescein system about 15 times. Regarding the CL mechanism, we proved that the emitting species is fluorescein, which can be excited by the energy transfer from the excited-state PDs. It was observed that CL emission is promoted by the interaction of metronidazole (MND) with the PDs. Therefore, we designed a novel and sensitive assay for MND based on its enhancing effect on NaIO₄-fluorescein-PDs CL system. The introduced assay showed a linear response in the range of 5.0-300 nM with a detection limit of 1.5 nM. The method was used for the determination of MND in spiked plasma samples.

Exceptionally high saturation magnetisation in Eu-doped magnetite stabilised by spin-orbit interaction

The significance of the spin-orbit interaction is very well known in compounds containing heavier elements such as the rare-earth Eu ion. Here, through density functional calculations, we investigated the effect of the spin-orbit interaction on the magnetic ground state of Eu doped magnetite (Fe₃O₄:Eu_Fe). By examining all possible spin alignments between Eu and magnetite's Fe, we demonstrate that Eu, which is most stable when doped at the tetrahedral site, adapts a spin almost opposite the substituted Fe. Consequently, because of smaller spin cancellation between the cations on the tetrahedral site (Fe_Tet and Eu_Tet) and the cations on the octahedral sites (Fe_Oct), Fe₃O₄:Eu_Fe exhibits a maximum saturation magnetisation of 9.451 μ_B per f.u. which is significantly larger than that of undoped magnetite (calculated to be 3.929 μ_B per f.u.). We further show that this large magnetisation persists through additional electron doping. However, additional hole doping, which may unintentionally occur in Fe deficient magnetite, can reduce the magnetisation to values smaller than that of the undoped magnetite. The results presented here can aid in designing highly efficient magnetically recoverable catalysts for which both magnetite and rare earth dopants are common materials.

Preparation of Titanium Oxide-Based Nanoparticles Modified with D-(+)-Mannose and Investigation of their Properties As A Potential Drug Carrier

Titanium oxide nanoparticles modified with D-(+)-mannose were obtained. In the process of their formation, they were conjugated with an active substance (tadalafil). The physicochemical properties of the obtained products were assessed, and the size and electrokinetic potential were determined using a dynamic light scattering technique. X-ray diffractometry was applied in order to define the crystalline properties, and Fourier-transform infrared spectroscopy was used to confirm the formation of the desired products. It was possible to obtain TiO2 coated with D-(+)-mannose. The average size of nanoparticles was between 230 and 268 nm. The release of the active substance from the product over a time period of three hours was assessed against the reference material, which was not modified by D-(+)-mannose. The results indicate that covering titanium oxide nanoparticles with the modifying substance favours a slower rate of release for the active substance, which is the desired effect from a pharmacological point of view. The releasing of active substance from modified products was even 68% slower than that from the reference product. These modified titanium oxides are promising materials that may have found an application as drug carriers.

Graphic Abstract

Green Synthesis and Characterization of Carboxymethyl Cellulose Fabricated Silver-Based Nanocomposite for Various Therapeutic Applications

Purpose

The current study proposed the simple, eco-friendly and cost-effective synthesis of carboxymethyl cellulose (CMC) structured silver-based nanocomposite (CMC-AgNPs) using Syzygium aromaticum buds extract.

Methods

The CMC-AgNPs were characterized by ultraviolet (UV) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transmission infra-red (FTIR), energy-dispersive X-ray (EDX), and dynamic light scattering (DLS) techniques. The synthesized nanocomposites were evaluated for their bactericidal kinetics, in-vivo anti-inflammatory, anti-leishmaniasis, antioxidant and cytotoxic activities using different in-vitro and in-vivo models.

Results

The spherical shape nanocomposite of CMC-AgNPs was synthesized with the mean size range of 20–30 nm, and the average pore diameter is 18.2 nm while the mean zeta potential of −31.6 ± 3.64 mV. The highly significant (P < 0.005) antibacterial activity was found against six bacterial strains with the ZIs of 24.6 to 27.9 mm. More drop counts were observed in Gram-negative strains after 10 min exposure with CMC-AgNPs. Significant damage in bacterial cell membrane was also observed in atomic force microscopy (AFM) after treated with CMC-AgNPs. Nanocomposite showed highly significant anti-inflammatory activity in cotton pellet induced granuloma model (Phase I) in rats with the mean inhibitions of 43.13% and 48.68% at the doses of 0.025 and 0.05 mg/kg, respectively, when compared to control. Reduction in rat paw edema (Phase II) was also highly significant (0.025 mg/kg; 42.39%; 0.05 mg/kg, 47.82%). At dose of 0.05 mg/kg, CMC-AgNPs caused highly significant decrease in leukocyte counts (922 ± 83), levels of CRP (8.4 ± 0.73 mg/mL), IL-1 (177.4 ± 21.3 pg/mL), IL-2 (83.7 ± 11.5 pg/mL), IL-6 (83.7 ± 11.5 pg/mL) and TNF-α (18.3 ± 5.3 pg/mL) as compared to control group. CMC-AgNPs produced highly effective anti-leishmaniasis activity with the viable Leishmania major counts decreased up to 36.7% within 24 h, and the IC₅₀ was found to be 28.41 μg/mL. The potent DPPH radical scavenging potential was also observed for CMC-AgNPs with the IC₅₀ value of 112 μg/mL. Furthermore, the cytotoxicity was assessed using HeLa cell lines with the LC₅₀ of 108.2 μg/mL.

Conclusion

The current findings demonstrate positive attributes of CMC fabricated AgNPs as a promising antibacterial, anti-inflammatory, anti-leishmaniasis, and antioxidant agent with low cytotoxic potential.

Novel manganese carbon quantum dots as a nano-probe: Facile synthesis, characterization and their application in naproxen delivery (Mn/CQD/SiO2@naproxen)

This study for the first time pursues two crucial aims of using Naproxen as a non-steroidal anti-inflammatory drug in a better, non-invasive setting and introducing a simple and biocompatible nano-carrier (Mn/CQD/SiO₂) which is a magneto carbon quantum dots modified with mesoporous silica probe which can be served as a drug delivery and tracer system. SiO₂modification was doneby mesoporous silica which improves biocompatibility and provideslow cytotoxicity. Naproxen was conjugated to the nano-probe to form Mn/CQD/SiO₂@naproxen and biodistribution was investigated. Physicochemical characteristics of the Mn/CQD/SiO₂@naproxen were investigated using FT-IR, SEM, TEM, UV-Vis and BET. Antiproliferation assay using MTT assay was performed on HEK-293 cells to determine the cytotoxity of Mn/CQD/SiO₂@naproxen. Relaxivity of Mn/CQD/SiO2 was examined thereafter. To investigate the imaging capability of Mn/CQD/SiO₂@naproxen and biodistribution of Naproxen, fluorescent imaging was done. To confirm the data, then the levels of COX Gene expression was determined. The specific surface area, pore volume, and pore radius were 44.4 m²/g, 10.23 cm³/g, and 25.9 nm respectively. MTT assay showed no cytotoxicity. Relaxivity of Mn/CQD/SiO₂ was higher than conventional Gd-based contrast agent. Fluorescence imaging of Mn/CQD/SiO₂@naproxen showed the biodistribution of naproxen. COX Gene expression confirmed the biodistribution data. By increasing the accumulation in liver COX production reduced. All in all, unique features of Mn/CQD/SiO₂ including biocompatibility, low toxicity, magnetic and fluorescence properties showed that it can be used in biomedical sciences.

Chromium and cerium co-doped magnetite/reduced graphene oxide nanocomposite as a potent antibacterial agent against S. aureus

The development of innovative antibacterial samples with high efficacy has received a great deal of interest. Herein, we synthesized magnetite modified by Cr and co-modified by Cr and Ce, along with their reduced graphene oxide (rGO)-based nanocomposites via facile hydrothermal and co-precipitation methods. The rGO-based samples showed proper magnetic behavior, high porosity, and vast specific surface area. The high specific surface area provided more adsorptive active sites with higher potentials for the decomposition of Staphylococcus aureus (S. aureus) cells. The antibacterial performance of the samples against S. aureus was evaluated at 50 and 100 μg mL^-1 through the colony-forming unit (CFU) method and the minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) values were subsequently determined. As per results, not only chromium cations could effectively damage the DNA of bacteria, but also the antibacterial efficacy was further enhanced by co-doping of cerium and the integration with rGO nanosheets. The antibacterial results were confirmed through the changes observed in the morphology and topology of the bacteria before and after the treatment using SEM and AFM analyses. Ultimately, the plausible S. aureus inactivation mechanism of the samples was disclosed.