Micelle sensitized synchronous spectrofluorimetric approaches for the simultaneous determination of simeprevir and ledipasvir: Application to pharmaceutical formulations and human plasma

An environmentally sustainable synchronous spectrofluorimetric method coupled with second derivative signal processing for simultaneous determination of velpatasvir and simeprevir in pharmaceutical and plasma samples

Velpatasvir and simeprevir are two direct acting antivirals that are often used in combination with sofosbuvir to treat HCV infections. Herein, an environmentally benign spectrofluorimetric method was developed for simultaneous quantification of velpatasvir and simeprevir in pharmaceutical and plasma samples. To address the issue of overlapping fluorescence spectra presented by these compounds, this method integrates synchronous fluorescence and second-derivative spectroscopy. By employing the second derivative of the synchronous fluorescence spectra measured at Δλ of 140 nm, the accurate determination of velpatasvir at 400 nm and simeprevir at 426 nm was achieved without any interference. Different experimental parameters affecting the synchronous fluorescence of the studied drugs were carefully optimized. The plots of second-derivative amplitudes against concentrations showed linearity in the range of 5-400 ng/mL for velpatasvir and 80-800 ng/mL for simeprevir. The method was very sensitive, with lower detection limits of 1.11 ng/mL and 25.40 ng/mL, and quantification limits of 3.36 ng/mL and 76.96 ng/mL for velpatasvir and simeprevir, respectively.The method was effectively used to determine velpatasvir and simeprevir simultaneously in their pure forms, pharmaceutical dosage forms, and human plasma with no interference. The suggested technique was additionally evaluated for its eco-friendliness through the utilization of the Analytical GREEnness (AGREE) and Green Analytical Procedure Index (GAPI) evaluation metrics, revealing that the method is indeed sustainable.

Synchronous spectrofluorimetry and chemometric modeling: A synergistic approach for analyzing simeprevir and daclatasvir, with application to pharmacokinetics evaluation

Simeprevir and daclatasvir represent a cornerstone in the management of Hepatitis C Virus infection, a global health concern that affects millions of people worldwide. In this study, we propose a synergistic approach combining synchronous spectrofluorimetry and chemometric modeling i.e. Partial Least Squares (PLS-1) for the analysis of simeprevir and daclatasvir in different matrices. Moreover, the study employs firefly algorithms to further optimize the chemometric models via selecting the most informative features thus improving the accuracy and robustness of the calibration models. The firefly algorithm was able to reduce the number of selected wavelengths to 47-44% for simeprevir and daclatasvir, respectively offering a fast and sensitive technique for the determination of simeprevir and daclatasvir. Validation results underscore the models' effectiveness, as evidenced by recovery rates close to 100% with relative root mean square error of prediction (RRMSEP) of 2.253 and 2.1381 for simeprevir and daclatasvir, respectively. Moreover, the proposed models have been applied to determine the pharmacokinetics of simeprevir and daclatasvir, providing valuable insights into their distribution and elimination patterns. Overall, the study demonstrates the effectiveness of synchronous spectrofluorimetry coupled with multivariate calibration optimized by firefly algorithms in accurately determining and quantifying simeprevir and daclatasvir in HCV antiviral treatment, offering potential applications in pharmaceutical formulation analysis and pharmacokinetic studies for these drugs.

A novel synchronous fluorescence spectrometry combined with fluorescence sensitization for the highly sensitive and simultaneous detection of enoxacin, ofloxacin and tetracycline hydrochloride residues in wastewater

The synergistic effect of sodium dodecyl sulfate (SDS) and Mg2+ could significantly enhance the fluorescence intensity of enoxacin (ENO) at λex/λem = 269.2 nm/385.6 nm, ofloxacin (OFL) at λex/λem = 290.8 nm/466.2 nm and tetracycline hydrochloride (TCH) at λex/λem = 372.6 nm/514.8 nm. Moreover, when the wavelength difference (Δλ) was chosen 135 nm, the synchronous fluorescence spectra of the three antibiotic complexes could be well separated and the interference of the samples matrix were eliminated primely. Therefore, only one synchronous fluorescence scan was needed to simultaneously determine the three antibiotics. Based on these facts, a synchronous fluorescence spectrometry combining fluorescence sensitization for highly sensitive and selective determination of ENO, OFL and TCH residues in wastewater was developed for the first time. The experimental results showed that the concentrations of ENO, OFL and TCH in the range of 0.5-550 ng mL-1, 1-1500 ng mL-1 and 10-5500 ng mL-1 showed a good linear relationship with fluorescence intensity. The limits of detection were 0.0599 ng mL-1, 0.115 ng mL-1 and 0.151 ng mL-1, respectively. The recoveries of the actual sample were 87.50%-99.99 %, 93.00%-98.50 % and 85.70%-98.42 %, respectively. Overall, the novel synchronous fluorescence spectrometry established in the experiment has the advantages of high sensitivity, good selectivity, fast detection speed and high accuracy. It has been successfully applied to the detection of residual amounts of ENO, OFL and TCH in wastewater with satisfactory results.

Development of a green synchronous spectrofluorimetric technique for simultaneous determination of Montelukast sodium and Bilastine in pharmaceutical formulations

For the treatment of rhinitis and asthma, a combination of Montelukast sodium and Bilastine has just been approved. Based on the first derivative of synchronous fluorescence, the current work developed a green, highly accurate, sensitive, and selective spectroscopic approach for estimating Montelukast sodium and Bilastine in pharmaceutical dosage form without previous separation. The selected technique focuses on measuring the synchronized fluorescence of the studied medications at a fixed wavelength range (Δλ) = 110 nm, and using the amplitude of the first derivative's peak at 381 and 324 nm, for quantitative estimation of Montelukast sodium and Bilastine, respectively. The impacts of different factors on the referred drugs' synchronized fluorescence intensity were investigated and adjusted. The calibration plots for were found to be linear over concentration ranges of 50-2000 ng mL-1 for Montelukast sodium and 50-1000 ng mL-1 for Bilastine. Montelukast sodium and Bilastine have LODs of 16.5 and 10.9 ng mL-1, respectively. In addition, LOQs were: 49.9 and 33.0 ng mL-1, for both drugs, respectively. The developed method was successfully employed to quantify the two drugs in synthetic tablets mixture and in laboratory prepared mixtures containing varied Montelukast and Bilastine ratios. To compare the results with the published analytical approach, a variance ratio F-test and a student t-test were used, which revealed no significant differences.

Analytical approaches for determination of COVID-19 candidate drugs in human biological matrices

Since the outbreak of the COVID-19 pandemic, the use of antiviral and other available drugs has been considered to combat or reduce the clinical symptoms of patients. In this regard, it would be necessary to choose sensitive and selective analytical techniques for pharmacokinetic and pharmacodynamic studies, monitoring of drug concentration in biological fluids, and determination of the most appropriate dose to achieve the desired effect on the disease. In the present study, the analytical techniques based on spectroscopy and chromatography with different detectors for diagnosis and determination of candidate drugs in the treatment of COVID-19 in human biological fluids are reviewed during the period 2015-2022. Moreover, various sample preparation and extraction techniques, are being used for this purpose, such as protein precipitation (PP), solid-phase extraction (SPE), liquid-liquid extraction (LLE), and QuEChERS (quick, easy, cheap, effective, rugged, and safe) are investigated.

Simultaneous spectrofluorimetic determination of remdesivir and simeprevir in human plasma

As new infectious mutations of SARS-CoV-2 emerged throughout the world, innovative therapies to counter the virus-altered drug sensitivities were urgently needed. Several antiviral options have been in clinical trials or in compassionate use for the treatment of SARS-CoV-2 infections in an attempt to minimize both clinical severity and viral shedding. Recent research indicated that simeprevir acts synergistically with remdesivir, allowing for a multiple-fold decrease in its effective dose when used at physiologically acceptable concentrations. The goal of this work is to develop a sensitive synchronous spectrofluorimetric approach to simultaneously quantify the two drugs in biological fluids. Using this method, remdesivir and simeprevir could be measured spectrofluorimetrically at 283 and 341 nm, respectively, without interference from each other using Δλ of 90 nm. The effect of various experimental parameters on the fluorescence intensity of the two drugs was extensively explored and optimized. For each of remdesivir and simeprevir, the method exhibited a linearity range of 0.10-1.10 μg/mL, with lower detection limits of 0.01 and 0.02 μg/mL and quantification limits of 0.03 and 0.05 μg/mL, respectively. The high sensitivity of the developed method permitted the simultaneous determination of both drugs in spiked plasma samples with % recoveries ranging from 95.0 to 103.25 with acceptable standard deviation values of 1.92 and 3.04 for remdesivir and simeprevir, respectively. The validation of the approach was approved by the International Council of Harmonization (ICH) guidelines.

Spectrofluorimetric first derivative synchronous approach for determination of olanzapine and samidorphan used for treatment of schizophrenia in pharmaceutical formulations and human plasma

The combination of olanzapine and samidorphan has just been authorised for the treatment of schizophrenia. The current study created a very accurate, sensitive and selective spectroscopic technique based on the first derivative of synchronous fluorescence for determining olanzapine and samidorphan in their pharmaceutical prescriptions without prior separation. For the quantitative analysis of samidorphan and olanzapine, the adopted approach is focused on measuring the synchronised fluorescence intensity of the examined medicines at fixed wavelength range (Δλ) = 50 nm and the first derivative's peak magnitudes were observed at 300 and 350 nm, respectively. The effects of various factors on the synchronised fluorescence intensity of the referenced medications were researched and adjusted. Both medications' calibrating charts were shown to be linear throughout a range of concentrations of 0.1-1.1 µg mL-1. LOD for SAM and OLA were 0.02 and 0.01, respectively. In addition, LOQ was determined for SAM and OLA as follow, 0.07 and 0.06, respectively. The devised approach was effectively used to the quantitative measurement of the two medicines in Lybalvi® tablets with various samidorphan and olanzapine ratios, in addition to spiked human plasma. A variance ratio F-test and student t-test were needed to be able to compare the results to another published analytical technique and found no significant differences.

A Review on Analytical Strategies for the Assessment of Recently Approved Direct Acting Antiviral Drugs

Human beings are in dire need of developing an efficient treatment against fierce viruses like hepatitis C virus (HCV) and Coronavirus (COVID-19). These viruses have already caused the death of over two million people all over the world. Therefore, over the last years, many direct-acting antiviral drugs (DAADs) were developed targeting nonstructural proteins of these two viruses. Among these DAADs, several drugs were found more effective and safer than the others as sofosbuvir, ledipasvir, grazoprevir, glecaprevir, voxilaprevir, velpatasvir, elbasvir, pibrentasvir and remdesivir. The last one is indicated for COVID-19, while the rest are indicated for HCV treatment. Due to the valuable impact of these DAADs, larger number of analytical methods were required to meet the needs of the clinical studies. Therefore, this review will highlight the current approaches, published in the period between 2017 to present, dealing with the determination of these drugs in two different matrices: pharmaceuticals and biological fluids with the challenges of analyzing these drugs either alone, with other drugs, in presence of interferences (pharmaceutical excipients or endogenous plasma components) or in presence of matrix impurities, degradation products and metabolites. These approaches include spectroscopic, chromatographic, capillary electrophoretic, voltametric and nuclear magnetic resonance methods that have been reported during this period. Moreover, the analytical instrumentation and methods used in determination of these DAADs will be illustrated in tabulated forms.

Analytical Methods for Determination of Antiviral Drugs in Different Matrices: Recent Advances and Trends

Viruses are the main pathogenic substances that cause severe diseases in humans and other living things. They are among the most common microorganisms, and consequently, antiviral drugs have emerged to prevent and treat viral infections. Antiviral drugs are an essential drug group considering their prescription and consumption rates for different diseases and indications. Therefore, it is crucial to develop accurate and precise analytical methods to detect antiviral drugs in various matrices. Chromatographic techniques are used frequently for the quantification purpose since they allow simultaneous determination of antivirals. Electrochemical methods have also gained importance since the analysis can be performed quickly without the need for pretreatment. Spectrophotometric and spectrofluorimetric methods are used because they are simple, inexpensive, and less time-consuming methods. The purpose of this review is to present an overview of the analysis of currently used antiviral drugs from 2010 to 2021. Since studies on antiviral drugs are numerous, selected publications were reviewed in this article. The analysis of antiviral drugs was divided into three main groups: chromatographic, spectrometric, and electrochemical methods which were applied to different matrices, including pharmaceutical, biological, and environmental samples.

Simultaneous determination of elbasvir and grazoprevir in their pharmaceutical formulation by synchronous fluorescence spectroscopy coupled to dual wavelength method

In the present study, a sensitive, selective and accurate synchronous fluorescence spectroscopic method was utilized for simultaneous estimation of elbasvir and grazoprevir in their pharmaceutical formulation. The developed method based on measurement of the synchronous fluorescence intensity of the studied drugs at constant wavelength difference (Δλ) = 50 nm. Elbasvir can be determined directly at 312 nm without interference from grazoprevir. Grazoprevir can be determined by application of dual wavelength method by taking the difference in synchronous fluorescence intensity at 390 & 372 nm to remove interference from elbasvir. Calibration graphs were found to be linear over the concentration range of 50-700 ng/mL for elbasvir and 100-900 ng/mL for grazoprevir. The developed method was successfully applied to the quantitative analysis of the two drugs in Zepatier® tablets.

Development and validation of a highly sensitive second derivative synchronous fluorescence spectroscopic method for the simultaneous determination of elbasvir and grazoprevir in pharmaceutical preparation and human plasma

Elbasvir and grazoprevir combination has been newly approved for the treatment of patients infected with hepatitis C virus.