Promoting ring-opening efficiency for suppressing toxic intermediates during photocatalytic toluene degradation via surface oxygen vacancies

Ce-based three-dimensional mesoporous microspheres with Mn homogeneous incorporation for toluene oxidation

Ce-based three-dimensional (3D) mesoporous microspheres with Mn homogeneous incorporation were synthesized. The CeMn-0.4, characterized by a Ce/Mn molar ratio of 6:4, demonstrated exceptional catalytic activity and stability. The formation of CeMn solid solution strengthened the Ce-Mn interaction, yielding higher concentrations of Ce3+ and Mn4+. Mn4+ initiated toluene preliminary activation owing to its robust oxidative properties, while Ce3+ contributed to oxygen vacancy generation, enhancing the activation of gaseous oxygen and lattice oxygen mobility. Integrating experiments and Density Functional Theory (DFT) calculations elucidated the oxygen reaction mechanisms. A portion of oxygen was converted into surface reactive oxygen species (Oads) that directly oxidized toluene. Additionally, the presence of oxygen vacancies promoted the participation of oxygen in toluene oxidation by converting it into lattice oxygen, which was crucial for the deep oxidation of toluene. Diffuse Reflectance Fourier Transform Infrared Spectroscopy (DRIFTS) indicated the accumulation of benzene-ring intermediates on the catalyst surface hindered continuous toluene oxidation. Thus, the abundant oxygen vacancies in CeMn-0.4 played a pivotal role in sustaining the oxidation process by bolstering the activation of gaseous oxygen and the mobility of lattice oxygen.

Reinforcing 2D Single-Crystal Bi2O2CO3 with Additional Interlayer Carbonates by CO2-Assisted Solid-to-Solid Phase Transition

A facile gaseous CO2 mediated solid-to-solid transformation principle is adopted to insert additional CO3 2- anions into the thin single-crystal nanosheets of Bi2O2CO3, which is built of periodic arrays of intrinsic CO3 2- anions and (Bi2O2)2+ layers. The additional CO3 2- anions create abundant defects. The Bi2O2CO3 nanosheets with rich interlayer CO3 2- exhibit superior electronic properties and charge transfer kinetics than the pristine single-crystal 2D Bi2O2CO3 and display enhanced catalytic activity in photocatalytic CO2 reduction reaction and the photocatalytic oxidative degradation of organic pollutants. This work thus illustrates interlayer engineering as a flexible means to build layered 2D materials with excellent properties.

Interconnected Periodic Macroporous NaNbO3 for High-Efficiency Solar-Driven Photocatalytic Hydrogen Evolution

Highly ordered periodic macroporous structures have been extensively utilized to significantly enhance the photocatalytic activity. However, constructing 3D interconnected ordered porous ternary nanostructures with highly crystalline frameworks remains a formidable challenge. Here, we introduce the design and fabrication of 3D interconnected periodic macroporous NaNbO3 (PM NaNbO3) to effectively increase the density of surface-active sites and optimize the photogenerated carrier-transfer efficiency. By incorporating Pt as a cocatalyst, PM NaNbO3 exhibits an exceptional photocatalytic hydrogen generation rate of 10.04 mmol h-1 g-1, which is approximately six and five times higher than those of calcined NaNbO3 (C-NaNbO3) and hydrothermal NaNbO3 (H-NaNbO3), respectively. This outstanding performance can be attributed to the synergistic effects arising from its well-interconnected pore architecture, large surface area, enhanced light absorption capability, and improved charge carrier separation and transport efficiency. The findings presented in this study demonstrate an innovative approach toward designing hierarchically periodic macroporous materials for solar-driven hydrogen production.

A photo-active hollow covalent organic frameworks microcapsule imparts highly efficient photoredox catalysis of gaseous volatile organic compounds

Covalent organic frameworks (COFs) with controlled porosity, high crystallinity, diverse designability and excellent stability are very attractive in metal-free heterogeneous photocatalysis of volatile organic compounds (VOCs) degradation. In order to construct the high optimal performance COFs under feasible and universal conditions, herein, the visible light-driven hollow COFTAPB-PDA (H-COFTAPB-PDA) microcapsule was designed by a facile dual-ligand regulated sacrificial template method. The H-COFTAPB-PDA microcapsule possesses improved surface area, high crystallinity, broad absorption range and high stability, which enables enhanced substrates and visible light adsorption, photogenerated electrons-holes separation and transfer, and facilitate the generation of reactive radicals. Importantly, it was found to be a highly efficient photocatalyst for toluene degradation under visible-light irradiation compared with the solid COFTAPB-PDA, and the degradation efficiency of toluene reached 91.8 % within 180 min with the conversion rate of CO2 was 68.9 %. Additionally, the H-COFTAPB-PDA presented good recyclability and long-term stability after multiple photocatalytic reuses. Furthermore, the active sites of H-COFTAPB-PDA in photocatalytic degradation of toluene was proposed by XPS and DFT calculations, and the degradation pathway and mechanism was proposed and analyzed. The result presented great prospect of morphologic design of hollow COFs in metal-free heterogeneous photocatalysis for VOCs degradation.

Spatial interfacial heterojunctions of TiO2 for photocatalytic degradation of toluene: Effects of interface amorphous region and oxygen vacancy

The catalytic activity of TiO2 is contingent upon its crystal structure and the optoelectronic properties associated with defects. In this study, a one-step method was used to synthesize TiO2 with a spatial interface of rutile/anatase phases, and a simple thermal annealing process was applied to optimize the amorphous regions and oxygen vacancies at the interface between the rutile and anatase phases of TiO2. High-resolution transmission electron microscopy (HRTEM) elucidates the evolution process of the amorphous domain at the interface, skillfully introducing oxygen vacancies at the heterojunction interface by modulating the amorphous domain. The obtained photocatalyst (TiO2-350 °C) after annealing exhibits an optimal interface structure, with its photocatalytic activity and stability in degrading toluene far superior to P25. Photocurrent and photoluminescence (PL) measurements affirm that the existence of interfacial oxygen vacancies heightens the efficiency of electron transfer at the interface, while surface oxygen vacancies significantly enhance the stability and mineralization rate of toluene degradation. The improved photocatalytic properties were attributed to the combined effects of surface/interface oxygen vacancies and spatial interface heterojunctions. The one-step synthesis method developed in this work provides a novel perspective on combining spatially interfaced anatase/rutile phases with surface/interfacial oxygen vacancies.

Establishing an Ion-Sieving Separator by Depositing Oxygen-Deficient SiOx Layer for Stabilized Zinc Metal Anode

Stable plating/stripping of Zn metal anode remains a great challenge owing to uncontrollable dendrite growth and side reactions. Ion-sieving separators is a unique and promising solution, that possess Zn2+ permeability and promote Zn2+ transport, can effectively alleviate the abovementioned problems. Ion-sieving on glass fiber separator by deposition of oxygen-deficient SiOx layer via active screen plasma technology is achieved. While having chemical composition similar to the glass fiber, the SiOx nanoparticles contain oxygen-rich vacancies that promoted dissociation of the adsorbed water and generation of the hydroxyl groups. The negatively-charged hydroxylated SiOx layer can repel SO4 2- and attract Zn2+, which can alleviate the side reactions. The strong interplay between hydroxyl groups and Zn2+ can boost Zn affinity and yield fast Zn2+ transport. Consequently, the SiOx-deposited GF separator enabled dendrite-free Zn deposition morphology, which displays lower overpotential of 18 mV and longer cycling life over 2000 h for Zn symmetric cell. Such a separator can also be easily scaled up to prepare the high-performance large-area (4 × 6 cm2) pouch Zn-based devices, showing remarkable flexibility and practicality.

Halogen-Site Regulation in Cs3Bi2X9 Quantum Dots for Efficient and Selective Oxidation of Benzyl Alcohol Driven by Solar Light

Sluggish charge kinetics and low selectivity limit the solar-driven selective organic transformations under mild conditions. Herein, an efficient strategy of halogen-site regulation, based on the precise control of charge transfer and molecule activation by rational design of Cs3Bi2X9 quantum dots photocatalysts, is proposed to achieve both high selectivity and yield of benzyl-alcohol oxidation. In situ PL spectroscopy study reveals that the Bi─Br bonds formed in the form of Br-associated coordination can enhance the separation and transfer of photoexcited carriers during the practical reaction. As the active center, the exclusive Bi─Br covalence can benefit the benzyl-alcohol activation for producing carbon-centered radicals. As a result, the Cs3Bi2Br9 with this atomic coordination achieves a conversion ratio of 97.9% for benzyl alcohol and selectivity of 99.6% for aldehydes, which are 56.9- and 1.54-fold higher than that of Cs3Bi2Cl9. Combined with quasi-in situ EPR, in situ ATR-FTIR spectra, and DFT calculation, the conversion of C6H5-CH2OH to C6H5-CH2* at Br-related coordination is revealed to be a determining step, which can be accelerated via halogen-site regulation for enhancing selectivity and photocatalytic efficiency. The mechanistic insights of this research elucidate how halogen-site regulation in favor of charge transfer and molecule activation toward efficient and selective oxidation of benzyl alcohol.

Water-Resistance-Based S-Scheme Heterojunction for Deep Mineralization of Toluene

Deep mineralization of low concentration toluene (C7 H8 ) is one of the most significant but challenging reactions in photocatalysis. It is generally assumed that hydroxyl radicals (⋅OH) as the main reactive species contribute to the enhanced photoactivity, however, it remains ambiguous at this stage. Herein, a S-scheme ZnSn(OH)6 -based heterojunction with AlOOH as water resistant surface layer is in situ designed for tuning the free radical species and achieving deep mineralization of C7 H8 . By employing a combination of in situ DRIFTS and materials characterization techniques, we discover that the dominant intermediates such as benzaldehyde and benzoic acid instead of toxic phenols are formed under the action of holes (h+ ) and superoxide radicals (⋅O2 - ). These dominant intermediates turn out to greatly decrease the ring-opening reaction barrier. This study offers new possibilities for rationally tailoring the active species and thus directionally producing dominant intermediates via designing water resistant surface layer.

Surface Hydroxyl and Oxygen Vacancies Engineering in ZnSnAl LDH: Synergistic Promotion of Photocatalytic Oxidation of Aromatic VOCs

Photocatalytic oxidation has gained great interest in environmental remediation, but it is still limited by its low efficiency and catalytic deactivation in the degradation of aromatic VOCs. In this study, we concurrently regulated the surface hydroxyl and oxygen vacancies by introducing Al into ZnSn layered double hydroxide (LDH). The presence of distorted Al species induced local charge redistribution, leading to the remarkable formation of oxygen vacancies. These oxygen vacancies subsequently increased the amount of surface hydroxyl and elongated its bond length. The synergistic effects of surface hydroxyl and oxygen vacancies greatly enhanced reactant adsorption-activation and facilitated charge transfer to generate •OH, •O2-, and 1O2, resulting in highly efficient oxidation and ring-opening of various aromatic VOCs. Compared with commercial TiO2, the optimized ZnSnAl-50 catalyst exhibited about 2-fold activity for the toluene and styrene degradation and 10-fold activity for the chlorobenzene degradation. Moreover, ZnSnAl-50 demonstrated exceptional stability in the photocatalytic oxidation of toluene under a wide humidity range of 0-75%. This work marvelously improves the photocatalytic efficiency, stability, and adaptability through a novel strategy of surface hydroxyl and oxygen vacancies engineering.

Current trends on dry photocatalytic oxidation technology for BTX removal: Viable light sources and highly efficient photocatalysts

One of the main gaseous pollutants released by chemical production industries are benzene, toluene and xylene (BTX). These dangerous gases require immediate technology to combat them, as they put the health of living organisms at risk. The development of heterogeneous photocatalytic oxidation technology offers several viewpoints, particularly in gaseous-phase decontamination without an additional supply of oxidants in air at atmospheric pressure. However, difficulties such as low quantum efficiency, ability to absorb visible light, affinity towards CO2 and H2O synthesis, and low stability continue to limit its practical use. This review presents recent advances in dry-phase heterogeneous photodegradation as an advanced technology for the practical removal of BTX molecules. This review also examines the impact of low-cost light sources, the roles of the active sites of photocatalysts, and the feasible concentration range of BTX molecules. Numerous studies have demonstrated a significant improvement in the efficiency of the photodegradation of volatile organic compounds by enhancing the photocatalytic reactor system and other factors, such as humidity, temperature, and flow rate. The mechanism for BTX photodegradation based on density functional theory (DFT), electron paramagnetic resonance (EPR) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) investigations is also discussed. Finally, the present research complications and anticipated future developments in the field of heterogeneous photocatalytic oxidation technology are discussed.

Surface and interface engineering of BiOCl nanomaterials and their photocatalytic applications

BiOCl materials have received much attention because of their unique optical and electrical properties. Still, their unsatisfactory catalytic performance has been troubling researchers, limiting the application of BiOCl-based photocatalysts. Therefore, many researchers have studied the adjustment of BiOCl-based materials to enhance photocatalytic efficiency. This review focuses on surface and interface engineering strategies for boosting the photocatalytic performance of BiOCl-based nanomaterials, including forming oxygen vacancy defects, constructing metal/BiOCl, and the fabrication of semiconductor/BiOCl nanocomposites. The photocatalytic applications of the above composites are also concluded in photodegradation of aqueous pollutants, photocatalytic NO removal, photo-induced H2 production, and CO2 reduction. Special emphasis has been given to the modification methods of BiOCl and photocatalytic mechanisms to provide a more detailed understanding for researchers in the fields of energy conversion and materials sciences.

Size Effect of Platinum Nanoparticles over Platinum-Manganese Oxide on the Low-Temperature Oxidation of Toluene

The effect of size of Pt nanoparticles has an important influence on the performance of supported Pt-based catalysts for the elimination of toluene. Herein, uniform Pt nanoparticles with average sizes of 1.5, 2.0, 2.5, 2.9, and 3.6 nm were obtained and supported on manganese oxide octahedral molecular sieves (OMS-2), and their catalytic performances for toluene oxidation were evaluated. Benefiting from the moderate interfacial interaction between nanoparticles and manganese oxide support, Pt/OMS-2-3 with the Pt particle size of 3.0 nm showed the best catalytic performance owing to the highest content of Pt2+ species. It also facilitates the formation of more abundant Mnδ+ (Mn2+ and Mn3+) and oxygen vacancies than that of the other sizes of the OMS-2-supported Pt nanoparticles, which can be filled by a large amount of adsorbed oxygen and converted into reactive oxygen species. We further showed that the resulting surface synergetic oxygen vacancies (Pt2+-Ov-Mnδ+) play a decisive part in catalyzing the complete oxidation of toluene. The result will provide new insights for designing efficient Pt-based catalysts for deep purification of toluene.

Efficient purification of a nitrate and chlorate mixture in water via photoredox activated intermediate coupling-decoupling pathway

Nitrate (NO3-) is a widespread contaminant that threatens human health and ecological safety. Meanwhile, the disinfection byproducts chlorate (ClO3-) is generated inevitably in conventional wastewater treatment. Therefore, the contaminants mixture of NO3- and ClO3- are universal in common emission units. Photocatalysis technology is a feasible approach for the synergistic abatement of contaminant mixture, where matching suitable oxidation reactions is a potential strategy to improve the photocatalytic reduction reactions. Herein, formate (HCOOH) oxidation is introduced to facilitate the photocatalytic reduction of the NO3- and ClO3- mixture. As a result, high purification efficiency of NO3- and ClO3- mixture are achieved, evidenced by 84.6% e--dependent removal of the mixture at a reaction time of 30 min, with 94.5% N2 selectivity and 100% Cl- selectivity, respectively. Specifically, by the close combination of in-situ characterizations and theoretical calculations, the detailed reaction mechanism is revealed, in which the intermediate coupling-decoupling route from NO3- reduction and HCOOH oxidation is established by the chlorate-induced photoredox activation, leading to the significantly enhanced efficiency for the wastewater mixture purification. The practical application of this pathway is established for simulated wastewater to show its wide applicability. This work provides new insights into photoredox catalysis technology for its environmental application.

Graphitic carbon nitride (g-C3N4)-assisted materials for the detection and remediation of hazardous gases and VOCs

Graphitic carbon nitride (g-C3N4)-based materials are attracting attention for their unique properties, such as low-cost, chemical stability, facile synthesis, adjustable electronic structure, and optical properties. These facilitate the use of g-C3N4 to design better photocatalytic and sensing materials. Environmental pollution by hazardous gases and volatile organic compounds (VOCs) can be monitored and controlled using eco-friendly g-C3N4- photocatalysts. Firstly, this review introduces the structure, optical and electronic properties of C3N4 and C3N4 assisted materials, followed by various synthesis strategies. In continuation, binary and ternary nanocomposites of C3N4 with metal oxides, sulfides, noble metals, and graphene are elaborated. g-C3N4/metal oxide composites exhibited better charge separation that leads to enhancement in photocatalytic properties. g-C3N4/noble metal composites possess higher photocatalytic activities due to the surface plasmon effects of metals. Ternary composites by the presence of dual heterojunctions improve properties of g-C3N4 for enhanced photocatalytic application. In the later part, we have summarised the application of g-C3N4 and its assisted materials for sensing toxic gases and VOCs and decontaminating NOx and VOCs by photocatalysis. Composites of g-C3N4 with metal and metal oxide give comparatively better results. This review is expected to bring a new sketch for developing g-C3N4-based photocatalysts and sensors with practical applications.

Jointly augmented photocatalytic NO removal by S-scheme Bi12SiO20/Ag2MoO4 heterojunctions with surface oxygen vacancies

The deep oxidation of NO molecules to NO₃^- species with the avoidance of toxic NO₂ generation is a big and challengeable concern, which can be solved by the rational design and construction of catalytic systems with satisfactory structural and optical features. For such, in this investigation binary composites Bi₁₂SiO₂₀/Ag₂MoO₄ (BSO-XAM) were fabricated through a facile mechanical ball-milling route. From microstructural and morphological analyses, heterojunction structures with surface oxygen vacancies (OVs) were simultaneously created, contributing to the enhanced visible-light absorption, reinforced migration and separation of charge carries, and further boosted generation of reactive species such as superoxide radicals and singlet oxygen. Based on the density-functional theory (DFT) calculations, surface OVs induced the strengthened adsorption and activation of O₂, H₂O, and NO molecules and oxidation of NO to NO₂, while heterojunction structures were beneficial for the continuous oxidation of NO₂ to NO₃^- species. Thus, the heterojunction structures with surface OVs synergistically guaranteed the augmented photocatalytic NO removal and constrained NO₂ generation of BSO-XAM through a typical S-scheme model. This study may provide scientific guidances for the photocatalytic control and removal of NO at ppb level by Bi₁₂SiO₂₀-based composites through the mechanical ball-milling protocol.

Interface engineering of Mn3O4/Co3O4 S-scheme heterojunctions to enhance the photothermal catalytic degradation of toluene

Transition metal oxides have high photothermal conversion capacity and excellent thermal catalytic activity, and their photothermal catalytic ability can be further improved by reasonably inducing the photoelectric effect of semiconductors. Herein, Mn₃O₄/Co₃O₄ composites with S-scheme heterojunctions were fabricated for photothermal catalytic degradation of toluene under ultraviolet-visible (UV-Vis) light irradiation. The distinct hetero-interface of Mn₃O₄/Co₃O₄ effectively increases the specific surface area and promotes the formation of oxygen vacancies, thus facilitating the generation of reactive oxygen species and migration of surface lattice oxygen. Theoretical calculations and photoelectrochemical characterization demonstrate the existence of a built-in electric field and energy band bending at the interface of Mn₃O₄/Co₃O₄, which optimizes the photogenerated carriers' transfer path and retains a higher redox potential. Under UV-Vis light irradiation, the rapid transfer of electrons between interfaces promotes the generation of more reactive radicals, and the Mn₃O₄/Co₃O₄ shows a substantial improvement in the removal efficiency of toluene (74.7%) compared to single metal oxides (53.3% and 47.5%). Moreover, the possible photothermal catalytic reaction pathways of toluene over Mn₃O₄/Co₃O₄ were also investigated by in situ DRIFTS. The present work offers valuable guidance toward the design and fabrication of efficient narrow-band semiconductor heterojunction photothermal catalysts and provides deeper insights into the mechanism of photothermal catalytic degradation of toluene.

Semi-solid electrolyte with layered heterometallic low-valent electron-mediator enabling indirect destruction of gaseous toluene

The electrochemical degradation of air pollutants, particularly volatile organic compounds (VOCs), at their gaseous state is a promising method. However, it remains at an infant stage due to sluggish solid-gas electron transfers at room temperature. We established a triphase reaction condition using a semi-solid electrolyte layer between the electrode and membrane to enhance the electron transfer at room temperature. A polyvinyl alcohol (PVA) gel layer was inserted between a bimetallic layered CuNi(CN)₄ complex coated Cu foam electrode (TCNi-Cu) and Nafion 324 membrane for the degradation of gaseous toluene. The cyclic voltammetry of TCNi-Cu using a sodium hydroxide-coated copper mesh electrode at a triphase showed Cu¹⁺ and Ni¹⁺ stabilization at -0.7 and -0.9 V, respectively, which was similar to the liquid phase electron transfer behavior. The degradation capacity of gaseous toluene without using electrogenerated TCNi-Cu + PVA gel was 0.54 mg cm² min^-1, whereas that of TCNi-Cu + PVA gel layers was 1.17 mg cm^-2min^-1, which revealed the mediation effect at a triphase condition. Toluene was converted into oxygen-containing products, such as butanol, propanol, and acetone (without reduction products), which revealed that indirect oxidation occurred at the cathode using an in-situ generated oxidant, such as OH˙ radical. As an electron-mediator, Cu¹⁺ was used to form oxidants for the degradation of toluene at -0.7 V. The toluene removal rate reached 1.4 μmol h^-1, with an energy efficiency of 0.15 Wh L^-1. This study is the first attempt to describe a liquid-electrolyte-free cathodic half-cell in electrochemical application to VOCs degradation, highlighting the electron transfer at room temperature.

High-Throughput Strategies for the Design, Discovery, and Analysis of Bismuth-Based Photocatalysts

Bismuth-based nanostructures (BBNs) have attracted extensive research attention due to their tremendous development in the fields of photocatalysis and electro-catalysis. BBNs are considered potential photocatalysts because of their easily tuned electronic properties by changing their chemical composition, surface morphology, crystal structure, and band energies. However, their photocatalytic performance is not satisfactory yet, which limits their use in practical applications. To date, the charge carrier behavior of surface-engineered bismuth-based nanostructured photocatalysts has been under study to harness abundant solar energy for pollutant degradation and water splitting. Therefore, in this review, photocatalytic concepts and surface engineering for improving charge transport and the separation of available photocatalysts are first introduced. Afterward, the different strategies mainly implemented for the improvement of the photocatalytic activity are considered, including different synthetic approaches, the engineering of nanostructures, the influence of phase structure, and the active species produced from heterojunctions. Photocatalytic enhancement via the surface plasmon resonance effect is also examined and the photocatalytic performance of the bismuth-based photocatalytic mechanism is elucidated and discussed in detail, considering the different semiconductor junctions. Based on recent reports, current challenges and future directions for designing and developing bismuth-based nanostructured photocatalysts for enhanced photoactivity and stability are summarized.

Recent Progress of Carbon Dots for Air Pollutants Detection and Photocatalytic Removal: Synthesis, Modifications, and Applications

Rapid industrialization has inevitably led to serious air pollution problems, thus it is urgent to develop detection and treatment technologies for qualitative and quantitative analysis and efficient removal of harmful pollutants. Notably, the employment of functional nanomaterials, in sensing and photocatalytic technologies, is promising to achieve efficient in situ detection and removal of gaseous pollutants. Among them, carbon dots (CDs) have shown significant potential due to their superior properties, such as controllable structures, easy surface modification, adjustable energy band, and excellent electron-transfer capacities. Moreover, their environmentally friendly preparation and efficient capture of solar energy provide a green option for sustainably addressing environmental problems. Here, recent advances in the rational design of CDs-based sensors and photocatalysts are highlighted. An overview of their applications in air pollutants detection and photocatalytic removal is presented, especially the diverse sensing and photocatalytic mechanisms of CDs are discussed. Finally, the challenges and perspectives are also provided, emphasizing the importance of synthetic mechanism investigation and rational design of structures.

In situ DRIFTS FT-IR and DFT study on Fe-V-W/Ti removal of NOx and VOCs

Nitrogen oxides (NO_X) and volatile organic compounds (VOCs) are generated during the coal-fired power plant's combustion. They can be simultaneously removed in SCR (selective catalytic reduction) region. Herein, the performance of V-W/Ti and Fe-V-W/Ti synthesized by wet impregnation in removing NO_X and VOCs was evaluated. XPS (X-ray photoelectron spectroscopy) result indicated that a redox cycle of Fe²⁺  + V⁵⁺  ⇌ Fe³⁺  + V⁴⁺ could form electron vacancy through electron transfer. Besides, the mechanisms of NH₃-SCR and VOCs catalytic oxidation were explored with in situ DRIFTS experience and DFT calculation. On Fe-V-W/Ti, in situ DRIFTS study found more absorption sites of NH₃, and different intermediates during simultaneously removal process. DFT calculation demonstrated that absorption energy of O₂ was decreased and O = O bond was lengthened with Fe doped. Both V-W/Ti and Fe-V-W/Ti followed the L-H mechanism and shared a common NH₃-SCR pathway: [Formula: see text]. However, the bidentate nitrate and monodentate nitrate were also revealed on Fe-V-W/Ti, which combined with NH₄⁺ and decomposed into N₂ and H₂O, or N₂O and H₂O, respectively. The detected NH₂ species combined with NO on the Fe-V-W/Ti, following the E-R mechanism. As for VOCs, the intermediates of benzene and toluene were revealed by in situ DRIFTS study, and detailed Mars-van Krevelen mechanism was discovered.

Photocatalytic Reactor as a Bridge to Link the Commercialization of Photocatalyst in Water and Air Purification

The development of clean and sustainable teleology is vital to treat the critical environmental pollutants. In the last decade, the use of photocatalytic reactors has been widely reported for organic pollutants degradation. From photocatalysis’s application in environmental remediation, the primary technical issue to scientists is always the efficiency. The enhanced photocatalytic efficiency is mainly depended on the materials improvement. However, the design of photoreactors lags behind the development of photocatalysts, which strongly limit the widespread use of photocatalysis technology in environmental remediation. The nanoparticles separation, mass transfer limitation, and photonic efficiency have always been problematic and restrict the high photocatalytic efficiency of photoreactors. To overcome these bottleneck problems, the most popular or newfangled designs of photoreactors employed in air and water treatment has been reviewed. The purpose of this review is to systematize designs and synthesis of innovative TiO2-based photoreactors and provides detailed survey and discussion on the enhanced mechanism of photocatalytic performance in different TiO2-based photoreactors. The most studied photoreactors are the following: packed bed reactor, film reactor and membrane reactor, which have some limitations and advantages. A comprehensive comparison between the different photocatalytic performance of TiO2-based photoreactors is presented. This work aims to summarize the progress of TiO2-based photoreactors and provides useful information for the further research and development of photocatalysis for water and air purification.

Insights into Dynamic Surface Bromide Sites in Bi4 O5 Br2 for Sustainable N2 Photofixation

Simulating photosynthesis has long been one of the ideas for realizing the conversion of solar energy into industrial chemicals. Heterogeneous N₂ photofixation in water is a promising way for sustainable production of ammonia. However, a mechanistic understanding of the complex aqueous photocatalytic N₂ reduction is still lacking. In this study, a light-dependent surface hydrogenation mechanism and light-independent protection of catalyst surface for N₂ reduction are revealed on ultrathin Bi₄ O₅ Br₂ (BOB) nanosheets, in which the creation and annihilation of surface bromine vacancies can be controlled via a surface bromine cycle. Our rapid scan in situ FT-IR spectra verify that photocatalytic N₂ reduction proceeds through an associative alternating mechanism on BOB surface with bromine vacancies (BrV-BOB). This work provides a new strategy to combine light-dependent facilitated reaction with light-independent regeneration of catalyst for advancing sustainable ammonia production.

Combined experimental and theoretical study of o-xylene elimination on Fe-Mn oxides catalysts

The development of low-cost and easily accessible catalysts to realize the practical applications of catalytic combustion of volatile organic compounds remains a challenge. In this work, a series of Fe-Mn oxides catalysts were prepared via a facile redox-precipitation route for the elimination of o-xylene. Among the synthesized catalysts, Fe3Mn1-RP exhibited excellent activity for o-xylene elimination with a T₅₀ and T₉₀ of 223 °C and 236 °C, respectively (o-xylene concentration = 500 ppm, WHSV = 36,000 mL g^-1 h^-1). Characterization results demonstrated that superior catalytic activity could be achieved from large specific surface area, good reducibility and high proportion of Mn⁴⁺. Besides, high Fe contents proved beneficial in generating additional oxygen vacancies, thereby improving the performance of the catalyst. The stable crystal structures and surface electron density distributions of the catalysts, and adsorption sites of o-xylene on the catalyst surface, were also determined through density functional theory (DFT) calculations to provide an in-depth mechanism on how the o-xylene oxidation occurred. Moreover, analysis of the energy barrier during the oxidation process proved that the ring-opening reaction on the surface of Fe3Mn1-RP with an activation energy as low as 2.46 eV would more likely occur via oxygen vacancies.

Oxygen Isotope Tracing Study to Directly Reveal the Role of O2 and H2O in the Photocatalytic Oxidation Mechanism of Gaseous Monoaromatics

O₂ and H₂O influence the photocatalytic oxidation mechanism of gaseous monoaromatics, but still in an unclear manner, due to the lack of direct evidence. Tracing an oxygen atom from ¹⁶O₂ and H₂¹⁸O to intermediates can clarify their roles. The low H₂¹⁸O content suppressed the formation of benzenedicarboxaldehydes during the oxidation of xylenes and ¹⁶O₂ greatly affected the yield of total intermediates, while neither of them altered the percentage order of the products. Methylbenzaldehydes, methylbenzyl alcohols, and benzenedicarboxaldehydes possessed greater ¹⁶O percentage (≥69.49%), while higher ¹⁸O distribution was observed in methylbenzoic acids and phthalide (≥59.51%). Together with the interconversion results of the products revealed, ¹⁶O₂ determined the transformation of xylenes initially to methylbenzaldehydes and then to methylbenzyl alcohols or benzenedicarboxaldehydes, while H₂¹⁸O mainly contributed to conversion of methylbenzaldehydes to methylbenzoic acids or phthalide. Further interaction sites of xylene and its products with H₂O and O₂ were confirmed by molecular dynamics calculations. The same roles of ¹⁶O₂ and H₂¹⁸O in the degradation of toluene, ethylbenzene, 1,2,4-trimethylbenzene, and 1,3,5-trimethylbenzene were also verified. This is the first report that provides direct evidence for the roles of O₂ and H₂O in the photocatalytic oxidation mechanism of gaseous monoaromatics. These findings are helpful to achieve controllable product formation from the oxidation of monoaromatics and predict their migration process in the atmospheric environment.

Efficient photocatalytic toluene degradation over heterojunction of GQDs@BiOCl ultrathin nanosheets with selective benzoic acid activation

Photocatalytic toluene degradation has attracted tremendous attention because of the growing environmental problem. However, conventional photocatalytic materials used for toluene degradation usually suffer from low carrier separation efficiency and poor stability which will degrade the catalytic performance. Herein, we report the synthesis of a novel heterostructure of GQDs@BiOCl ultrathin nanosheets where the GQDs can rapidly capture and transport photogenerated electrons for effective charge separation, promoting the generation of more reactive oxygen species (·O₂^- and ·OH radicals) for toluene degradation. In situ DRIFTS measurement and theoretical calculation are performed to unveil the reaction intermediates and the underlying toluene oxidation mechanism. The GQDs@BiOCl heterojunction could facilitate the adsorption and conversion of toluene and the reaction intermediates. Especially, the heterojunction greatly enhances the activation and conversion of benzoic acid and thus expedites the complete toluene degradation. This work presents a new insight on the design of high-performance photocatalysts for efficient degradation of typical air pollutants.

Flowerlike BiOCl nanospheres fabricated by an in situ self-assembly strategy for efficiently enhancing photocatalysis

For semiconductor-based photocatalytic reactions, defect engineering has been proven as an efficient approach to enhance the photocatalytic performance. In this work, a synergistically PVP/EG-assisted in situ self-assembly strategy has been successfully developed for preparing flowerlike BiOCl nanospheres (NSP) assembled by ultrathin nanosheets (thickness of 3.8 nm) with abundant oxygen vacancies (OVs). During the hydrothermal process, PVP plays a template role in controlling the orientation of the crystallite growth, leading to the forming of nanosheets. Meanwhlie, ethylene glycol would induce the self-assembly of nanosheets into a loose hierarchical architecture duo to its stereo-hindrance effect. NSP achieves a twice higher photocatalytic conversion of benzylamine than BiOCl nanosheets (NST) under visible light. XPS, ESR, NH₃-TPD results manifest that NSP possesses more active sites including OVs and unsaturated Bi atoms than NST, because of avoiding the accumulation of ultrathin nanosheets. In situ FTIR reveals that benzylamine molecules can be chemisorbed and activated on BiOCl interfaces via forming -N^…Bi- species. The OVs can facilitate the forming of superoxide radicals (•O₂^-), achieving the selective photooxidation. Finally, a possible synergetic mechanism based on the interaction of reactants and catalyst interfaces was proposed to illustrate the photocatalytic process at the molecular level.

Identification of deactivation-resistant origin of In(OH)3 for efficient and durable photodegradation of benzene, toluene and their mixtures

Aromatic hydrocarbon is a representative type of VOCs, which causes adverse effects to human health. The degradation stability of aromatic hydrocarbon is of vital importance to commercializing a photocatalyst for its practical application. The most commonly used titanium dioxide photocatalyst (P25) was deactivated rapidly in the photocatalytic VOCs degradation process. In this work, the indium hydroxide (In(OH)₃) photocatalyst was developed, which exhibited not only higher efficient activity but also ultra-stable stability for degradation of benzene, toluene and their mixtures. The origin of the activity difference between two catalysts was investigated by combined experimental and theoretical ways. Based on in situ DRIFTS and GC-MS, it was revealed that benzoic acid and carbonaceous byproducts were specifically formed and accumulated on P25, which were responsible for deactivation of photocatalyst. In contrast, as revealed by both DFT calculations and experimental results, the reaction pathway with byproducts blocking the active sites can be thermodynamically avoided on In(OH)₃. This rendered high durability to In(OH)₃ photocatalyst in degradations of aromatic pollutants. The elucidation of deactivation-resistant effect and reaction mechanism as an ideal photocatalyst for practical usage were provided.

Synthesis of efficient Y-Bi2WO6/G visible light photocatalysts with high stability for pollutant degradation

For effective photocatalytic pollutant degradation on bismuth tungstate (Bi2WO6), it is vital to enhance the photogenerated charge separation and the photochemical stability. Herein, we successfully fabricated yttrium (Y)-Bi2WO6/graphene (G) nanocomposites with a significantly enhanced visible light-driven photocatalytic ability to degrade Rhodamine B compared with the bare Bi2WO6. This is attributed to the remarkably improved visible light absorption capability and photogenerated charge separation after doping yttrium and subsequent coupling with graphene, as revealed by photoluminescence and electrochemical impedance spectroscopies. Moreover, trapping experiments were carried out to clarify that photogenerated ·O2- and holes were the dominant oxidative species in the photocatalytic reaction. In addition, it was confirmed that the resulting composites maintained good photostability and chemical stability during recycling tests. Graphical abstract.

Surface structure tuning of BiOCl nanosheets by the sequential introduction of oxygen vacancies, PO43- and Ag+ for boosting photodegradation of tetracycline hydrochloride

The surface structure significantly impacts the physicochemical properties of semiconductors. Constructing heterojunction is a universal approach to tune surface structure, which can effectively accelerate the charge transfer at the interface. Here, BiOCl nanosheets which occupy high ratio of surface atoms to entire atoms were used as a model photocatalyst, and a strategy was proposed to tune its surface structure by sequential introduction of oxygen vacancies, PO₄^3- and Ag⁺ on surface of BiOCl nanosheets. In order to inhibit the overgrowth of heterogeneous component, the excess PO₄^3- was timely removed by centrifugation before adding Ag⁺. As a result, the as-obtained optimal sample which was confirmed to be a composite composed of BiOCl, BiPO₄ and AgCl showed superior photocatalytic activity for tetracycline hydrochloride degradation with the rate of 38 times higher than that of pristine BiOCl, which was mainly attributed to the quick migration of photongenerated carrier. The active species h⁺ and •O₂^- played a vital role in this degradation process. Our strategy not only greatly saved investment of noble metal Ag, but also provide superior stability. On the basis of experimental results and density functional theory calculation, the visible-light driven catalytic mechanism was revealed.

Efficient photocatalytic degradation of volatile organic compounds over carbon quantum dots decorated Bi2WO6 under visible light

A series of CQDs/Bi₂WO₆ (CBW) hybrid materials with different loading amounts of carbon quantum dots (CQDs) were prepared via a facile in situ hydrothermal method. As determined by multiple techniques including XRD, TEM, UV-vis, PL, TPR, and XPS, the CBW possessed expanded visible light response interval, decreased recombination rate of the photogenerated electron hole, and enhanced oxidation ability as compared with the pristine Bi₂WO₆. In addition, with different loading amounts of CQDs, the optical and electronic properties of the corresponding CBW were different. These CBW materials performed superior activities to the pristine Bi₂WO₆ in the photodegradation of VOCs under visible light, among which the CBW-2 demonstrated the best activity of almost complete degradation within only 120 min. Moreover, the CBW-2 exhibited high stability and reusability after five cycles.

Facile fabrication of flower-like MnO2 hollow microspheres as high-performance catalysts for toluene oxidation

A facile and robust interface reaction method for controllable synthesis of hierarchically structured flower-like MnO₂ hollow microspheres was developed at a low cost. With MnCO₃ microspheres as homologous templates, KMnO₄ was used to conduct redox reactions with the surface layer of the MnCO₃ microspheres to form porous flower-like MnO₂. Then, the internal template was removed by HCl etching to obtain flower-like MnO₂ hollow microspheres. HCl plays the dual role of removing the template and generating oxygen vacancies through acid etching. The as-prepared flower-like MnO₂ hollow microspheres exhibited excellent low-temperature catalytic activity for toluene oxidation owing to the desirable features of a high specific surface area, abundant oxygen vacancies, high content of Mn⁴⁺, a high number of acidic sites and a strong acidity. This work provides a new strategy for the facile construction of high-performance volatile organic compounds oxidation catalysts with industrial application prospects.

Surface Lattice Oxygen Activation on Sr2Sb2O7 Enhances the Photocatalytic Mineralization of Toluene: from Reactant Activation, Intermediate Conversion to Product Desorption

Transition-metal oxide photocatalysis has attracted increasing attention in environmental remediation and solar energy conversion. Surface lattice oxygen is the key active site on the metal oxide, but its role and activation mechanism in the photocatalytic VOC mineralization are still unclear. In this work, we have demonstrated that Sr₂Sb₂O₇ exhibits an excellent photocatalytic activity and stability compared to TiO₂ (P25) in gaseous toluene mineralization because the lattice oxygen on Sr₂Sb₂O₇ can be activated efficiently. The lattice oxygen of Sr₂Sb₂O₇ promotes the adsorption and activation of O₂ and H₂O molecules and enhances the production of ^•O₂^- and ^•OH radicals, as confirmed by the electron spin resonance and DFT calculations. The in situ diffuse reflectance infrared Fourier transform spectroscopy spectra are applied to dynamically monitor the intermediate activation and selective conversion. Combined with DFT calculation, the role and the mechanism of lattice oxygen in photocatalysis have been revealed. Owing to the promoted surface lattice oxygen, the selectivity for benzoic acid formation is enhanced and final product desorption is promoted, which could largely advance the ring opening and mineralization of toluene. This work reveals the origin of lattice oxygen activation and the role for efficient VOC degradation at the atomic scale.

Polyhedral cobalt oxide supported Pt nanoparticles with enhanced performance for toluene catalytic oxidation

Polyhedral CoO_x was synthesized by calcination of Co-based metal-organic framework ZIF-67 and highly dispersed Pt nanoparticles were successfully loaded on CoO_x. The catalytic results showed that Pt_nano/CoO_x had the best activity and stability. As compared with conventional Co₃O₄, polyhedral CoO_x showed more excellent catalytic oxidation performance of toluene, which was related to enhanced oxygen mobility, defective structure and rich active oxygen species provided by Polyhedral CoO_x. Moreover, Pt-CoO_x metal-support interaction enhanced the dispersion of Pt species and showed more Pt⁰ ratio. It was reasonable that the gaseous O₂ can be activated directly or moved into the catalyst's surface to form oxygen cycle.

Photocatalytic reaction mechanisms at the gas–solid interface for environmental and energy applications

Five gas–solid photocatalytic reactions including the oxidation of NOx, VOCs and NH3, and reduction of CO2 and N2 are summarized. Besides, basic properties of gas molecules, their adsorption and activation, and various reaction pathways are analyzed.

Non-linear relationship between tourism, economic growth, urbanization, and environmental degradation: evidence from smooth transition models

The study aims to analyze two objectives: first is to explore the non-linear relationship between tourism development, economic growth, urbanization, and environmental degradation, and also to analyze the threshold level of the contribution of tourism development on environmental degradation in top tourist arrival destinations. We applied the newly proposed econometric method panel smooth transition regression (PSTR) framework with two regimes on yearly panel data from 1995 to 2017. Findings suggest that the relationship between tourism development and environmental degradation is non-linear and regime dependent. Furthermore, the findings indicated that the relationship above the threshold level is negative and significant, while below the threshold, tourism development is positive and significant effect on environmental degradation. Tourism development and environmental degradation also exhibit the inverted U-shape relationship meaning that at a particular point, increase in tourism development increases in environmental degradation but after a particular point, increase in tourism development decreases the environmental degradation. The economic growth and urbanization also portray a non-linear and regime-dependent relationship with environmental degradation. The study assists policies and empirical information.

Surface structure-dependent photocatalytic O2 activation for pollutant removal with bismuth oxyhalides

The purification of water and air by semiconductor photocatalysis is a rapidly growing area for academic research and industrial innovation, featured with ambient removal of organic or inorganic pollutants by using solar light as the energy source and atmospheric O₂ as the green oxidant. Both charge transfer and energy transfer from excited photocatalysts can overcome the spin-forbidden nature of O₂. Layered bismuth oxyhalides are a new group of two-dimensional photocatalysts with an appealing geometric and surface structure that allows the dynamic and selective tuning of O₂ activation at the surface molecular level. In this Feature Article, we specifically summarize our recent progress in selective O₂ activation by engineering surface structures of bismuth oxyhalides. Then, we demonstrate selective photocatalytic O₂ activation of bismuth oxyhalides for environmental control, including water decontamination, volatile organic compound oxidation and nitrogen oxide removal, as well as selective catalytic oxidations. Challenges and opportunities regarding the design of photocatalysts with satisfactory performance for potential environmental control applications are also presented.

Recycling of spent alkaline Zn-Mn batteries directly: Combination with TiO2 to construct a novel Z-scheme photocatalytic system

Recycling of spent alkaline Zn-Mn batteries (S-AZMB) has always been a focus of attention in environmental and energy fields. However, the current research mostly concentrated in the recovery of purified materials, and ignores the direct reuse of S-AZMB. Herein, we propose a new concept for the first time that unpurified S-AZMB can be used as raw materials for preparation of Z-scheme photocatalytic system in combination with TiO₂. A series of characterizations and experiments confirm that the combination with S-AZMB not only extends the response of TiO₂ to visible light, but also significantly enhances the separation ability of photogenerated electron-hole pairs. In the toluene removal experiment, the degradation kinetic rate of Z-scheme TiO₂@S-AZMB photocatalyst reaches 21.0 and 10.5 times than that of TiO₂ and S-AZMB, respectively. More notably, this S-AZMB based Z-scheme photocatalyst can maintain structural and photocatalytic performance stability in cyclic catalytic reactions. We believe that this work not only expands the research concept of recycling S-AZMB, but also provides a new idea for designing highly efficient Z-scheme photocatalysts.

Geometric and electronic modification of the active Fe3+ sites of α-Fe2O3 for highly efficient toluene combustion

In the present study, catalytically inactive or low-active Ti⁴⁺ (d⁰) or Zn²⁺ (d¹⁰) ions were doped to α-Fe₂O₃ to tune the geometric and electronic engineering for Fe active center. X-ray absorption near edge structure (XANES) and Powder X-ray diffraction (XRD) analyses coupled with density functional theory (DFT) calculation show that the added of Ti⁴⁺ could occupy the interstitial octahedral or tetrahedral sites, resulting in surface Fe²⁺ species are oxidized to octahedrally coordinated Fe³⁺. As a result, more oxygen vacancies are generated, which improve the catalytic performance for toluene combustion. On the other hand, Fe²⁺ was substituted by Zn²⁺ ion could result in the partial destruction of hematite crystal structure, forming an additional phase of ZnFe₂O₄, and meanwhile part of Zn²⁺ ions replace the octahedrally coordinated Fe³⁺ sites, and therefore significantly decreasing the toluene catalytic performance. Moreover, our studies demonstrate that the combustions of toluene over Fe-based catalysts involve both the MvK and L-H mechanisms.

Nature-inspired CaCO3 loading TiO2 composites for efficient and durable photocatalytic mineralization of gaseous toluene

The accumulation of intermediates or final products on TiO₂ during photocatalytic volatile organic compounds (VOCs) degradation is typically neglected, despite the fact that it could result in the block of active sites and the deactivation of photocatalysts. Inspired from the natural formation of stalactite (CaCO₃ + H₂O + CO₂ ↔ Ca(HCO₃)₂), we fabricated CaCO₃ loading TiO₂ composites (CCT21) to realize the spontaneously transfer of accumulated final products (CO₂ and H₂O). Efficient and durable performance for gaseous toluene removal has been demonstrated and the cost of photocatalyst is greatly reduced by the comparison of specific activity. The introduction of CaCO₃ induces the interaction between TiO₂ and CaCO₃ to stimulate abundant activated electrons for the improvement on the adsorption and activation of reactants and the transformation of photogenerated carriers, and most importantly, facilitates the transfer of final products to release active sites and thus suppress the deactivation of TiO₂. Furthermore, we develop a facile method to immobilize CCT21 powder on flexible support, which greatly reduces the loss of photocatalysts and correspondingly enables the practical application of TiO₂-based products. Therefore, this work presents a novel nature-inspired strategy to address the challenge of deactivation, and advances the development of photocatalytic technology for environmental remediation.