1
|
Rasilainen I, Lahtela V, Kärki T. A review of plastic waste nanocomposites: assessment of features and applications. DISCOVER NANO 2024; 19:112. [PMID: 38970729 PMCID: PMC11227482 DOI: 10.1186/s11671-024-04062-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/20/2024] [Accepted: 06/29/2024] [Indexed: 07/08/2024]
Abstract
Hundreds of millions of metric tons of plastic waste are generated globally every year. Processing waste into secondary raw material is preferred over energy production and landfilling. However, mechanical recycling generally deteriorates the properties of plastic waste limiting its range of potential applications. Nanocomposite fabrication is a solution to recycle plastic waste into value-added applications due to improved properties generated by nanomaterial reinforcement, however received little study. The aim of this review is to present the current status, identify research gaps and provide topics for further research of polymer nanocomposites prepared from plastic waste in respect to utilized materials, processing methods, enhanced properties, sustainability, economics, nanomaterial safety, and applications. It is found that morphological, mechanical, thermal, flame retardancy, physical, barrier, electrical and shielding properties of plastic waste can be enhanced with low loadings of different nanomaterials making them promising materials for various applications including electronic, shielding, thermal, packaging, filtration, and water treatment. Utilization of plastic waste instead of virgin polymers can be beneficial in respect to economics and sustainability, but the energy intensive and expensive production of the most nanomaterials, and the plastic waste pretreatment methods can negate these benefits. To enhance sustainability, further research should be conducted on utilization of energy friendly nanomaterials in plastic waste nanocomposites. Further research is needed also on polymer nanocomposite safety because of the unknow composition of the plastic waste and the potential for nanomaterial release during nanocomposite's life cycle. All in all, further research and national regulations and guidance are needed on virgin polymer and plastic waste nanocomposites.
Collapse
Affiliation(s)
- Ida Rasilainen
- Fiber Composite Laboratory, LUT School of Energy Systems, Lappeenranta-Lahti University of Technology LUT, Yliopistonkatu 34, 53851, Lappeenranta, Finland.
| | - Ville Lahtela
- SCI-MAT Research Platform & Fiber Composite Laboratory, LUT School of Energy Systems, Lappeenranta-Lahti University of Technology LUT, Yliopistonkatu 34, 53851, Lappeenranta, Finland
| | - Timo Kärki
- Fiber Composite Laboratory, LUT School of Energy Systems, Lappeenranta-Lahti University of Technology LUT, Yliopistonkatu 34, 53851, Lappeenranta, Finland
| |
Collapse
|
2
|
Wohlleben W, Bossa N, Mitrano DM, Scott K. Everything falls apart: How solids degrade and release nanomaterials, composite fragments, and microplastics. NANOIMPACT 2024; 34:100510. [PMID: 38759729 DOI: 10.1016/j.impact.2024.100510] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/03/2024] [Revised: 05/05/2024] [Accepted: 05/08/2024] [Indexed: 05/19/2024]
Abstract
To ensure the safe use of materials, one must assess the identity and quantity of exposure. Solid materials, such as plastics, metals, coatings and cements, degrade to some extent during their life cycle, and releases can occur during manufacturing, use and end-of-life. Releases (e.g., what is released, how does release happen, and how much material is released) depend on the composition and internal (nano)structures of the material as well as the applied stresses during the lifecycle. We consider, in some depth, releases from mechanical, weathering and thermal stresses and specifically address the use cases of fused-filament 3D printing, dermal contact, food contact and textile washing. Solid materials can release embedded nanomaterials, composite fragments, or micro- and nanoplastics, as well as volatile organics, ions and dissolved organics. The identity of the release is often a heterogenous mixture and requires adapted strategies for sampling and analysis, with suitable quality control measures. Control materials enhance robustness by enabling comparative testing, but reference materials are not always available as yet. The quantity of releases is typically described by time-dependent rates that are modulated by the nature and intensity of the applied stress, the chemical identity of the polymer or other solid matrix, and the chemical identity and compatibility of embedded engineered nanomaterials (ENMs) or other additives. Standardization of methods and the documentation of metadata, including all the above descriptors of the tested material, applied stresses, sampling and analytics, are identified as important needs to advance the field and to generate robust, comparable assessments. In this regard, there are strong methodological synergies between the study of all solid materials, including the study of micro- and nanoplastics. From an outlook perspective, we review the hazard of the released entities, and show how this informs risk assessment. We also address the transfer of methods to related issues such as tyre wear, advanced materials and advanced manufacturing, biodegradable polymers, and non-solid matrices. As the consideration of released entities will become more routine in industry via lifecycle assessment in Safe-and-Sustainable-by-Design practices, release assessments will require careful design of the study with quality controls, the use of agreed-on test materials and standardized methods where these exist and the adoption of clearly defined data reporting practices that enable data reuse, meta-analyses, and comparative studies.
Collapse
Affiliation(s)
- Wendel Wohlleben
- BASF SE, Dept. of Analytical and Materials Science, 67056 Ludwigshafen, Germany.
| | - Nathan Bossa
- TEMAS Solutions GmbH, Lätterweg 5, 5212 Hausen, Switzerland; Department of Civil & Environmental Engineering, Duke University, Durham, NC 27708, United States
| | - Denise M Mitrano
- Environmental Systems Science Department, ETH Zurich, Universitätstrasse 16, 8092 Zurich, Switzerland
| | - Keana Scott
- Materials Measurement Science Division, National Institute of Standards and Technology, 100 Bureau Drive, MS-8372, Gaithersburg, MD 20899, United States
| |
Collapse
|
3
|
Sola A, Trinchi A. Recycling as a Key Enabler for Sustainable Additive Manufacturing of Polymer Composites: A Critical Perspective on Fused Filament Fabrication. Polymers (Basel) 2023; 15:4219. [PMID: 37959900 PMCID: PMC10649055 DOI: 10.3390/polym15214219] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/09/2023] [Revised: 10/20/2023] [Accepted: 10/23/2023] [Indexed: 11/15/2023] Open
Abstract
Additive manufacturing (AM, aka 3D printing) is generally acknowledged as a "green" technology. However, its wider uptake in industry largely relies on the development of composite feedstock for imparting superior mechanical properties and bespoke functionality. Composite materials are especially needed in polymer AM, given the otherwise poor performance of most polymer parts in load-bearing applications. As a drawback, the shift from mono-material to composite feedstock may worsen the environmental footprint of polymer AM. This perspective aims to discuss this chasm between the advantage of embedding advanced functionality, and the disadvantage of causing harm to the environment. Fused filament fabrication (FFF, aka fused deposition modelling, FDM) is analysed here as a case study on account of its unparalleled popularity. FFF, which belongs to the material extrusion (MEX) family, is presently the most widespread polymer AM technique for industrial, educational, and recreational applications. On the one hand, the FFF of composite materials has already transitioned "from lab to fab" and finally to community, with far-reaching implications for its sustainability. On the other hand, feedstock materials for FFF are thermoplastic-based, and hence highly amenable to recycling. The literature shows that recycled thermoplastic materials such as poly(lactic acid) (PLA), acrylonitrile-butadiene-styrene (ABS), and polyethylene terephthalate (PET, or its glycol-modified form PETG) can be used for printing by FFF, and FFF printed objects can be recycled when they are at the end of life. Reinforcements/fillers can also be obtained from recycled materials, which may help valorise waste materials and by-products from a wide range of industries (for example, paper, food, furniture) and from agriculture. Increasing attention is being paid to the recovery of carbon fibres (for example, from aviation), and to the reuse of glass fibre-reinforced polymers (for example, from end-of-life wind turbines). Although technical challenges and economical constraints remain, the adoption of recycling strategies appears to be essential for limiting the environmental impact of composite feedstock in FFF by reducing the depletion of natural resources, cutting down the volume of waste materials, and mitigating the dependency on petrochemicals.
Collapse
Affiliation(s)
- Antonella Sola
- Advanced Materials and Processing, Manufacturing Business Unit, Commonwealth Scientific and Industrial Research Organisation (CSIRO), Clayton, Melbourne, VIC 3169, Australia
| | - Adrian Trinchi
- Advanced Materials and Processing, Manufacturing Business Unit, Commonwealth Scientific and Industrial Research Organisation (CSIRO), Clayton, Melbourne, VIC 3169, Australia
| |
Collapse
|
4
|
Zhao Y, Goodwin DG, Sung L, Ramakrishnan G, Wu Q, Cen J, Petersen EJ, Orlov A. Quantitative evaluation of released nanomaterials from carbon nanotube epoxy nanocomposites during environmental exposure and mechanical treatment. NANOIMPACT 2023; 32:100486. [PMID: 37777181 DOI: 10.1016/j.impact.2023.100486] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/15/2023] [Revised: 08/17/2023] [Accepted: 09/27/2023] [Indexed: 10/02/2023]
Abstract
Carbon nanotubes (CNTs) are promising nanomaterials exhibiting high thermal and electrical conductivities, significant stiffness, and high tensile strength. As a result, CNTs have been utilized as additives to enhance properties of various polymeric materials in a broad range of fields. In this study, we investigated the release of CNTs from CNT epoxy nanocomposites exposed to environmental weathering and mechanical stresses. The presence and amount of CNTs released from degraded polymer nanocomposites is important because CNTs can impact physiological systems in humans and environmental organisms. The weathering experiments in this study included nanocomposite exposure to both UV and a water spray, to simulate sunlight and rain exposure, whereas mechanical stresses were induced by shaking and ultrasonication. CNT release from epoxy nanocomposites was quantified by a 14C-labeling method that enabled measurement of the CNT release rates after different weathering and mechanical treatments. In this study, a sample oxidizer was used prior to liquid scintillation counting, because it was shown to reduce interferences from the presence of polymeric materials and achieve a high recovery (95%). Polymer nanocomposite degradation was confirmed by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), and light microscopy. A continuous release of 14C-labeled nanomaterials was observed after each UV and simulated rain exposure period, with 0.23% (mass/mass) of the total embedded mass of CNTs being released from the CNT nanocomposite during the full weathering process, suggesting that the water spray induced sufficient mechanical stress to eliminate the protective effect of the surface agglomerated CNT network. Importantly, additional mechanical stresses imposed on the weathered nanocomposites by shaking and ultrasonication resulted in further release of approximately 0.27% (mass /mass).
Collapse
Affiliation(s)
- Yue Zhao
- Department of Chemistry, Stony Brook University, Stony Brook, NY 11794, USA
| | - David G Goodwin
- Engineering Laboratory, National Institute of Standards and Technology (NIST), Gaithersburg, MD 20899, USA
| | - Lipiin Sung
- Engineering Laboratory, National Institute of Standards and Technology (NIST), Gaithersburg, MD 20899, USA
| | - Girish Ramakrishnan
- Department of Materials Science and Chemical Engineering, Stony Brook University, Stony Brook, NY 11794, USA
| | - Qiyuan Wu
- Department of Materials Science and Chemical Engineering, Stony Brook University, Stony Brook, NY 11794, USA
| | - Jiajie Cen
- Department of Materials Science and Chemical Engineering, Stony Brook University, Stony Brook, NY 11794, USA
| | - Elijah J Petersen
- Material Measurement Laboratory, National Institute of Standards and Technology (NIST), Gaithersburg, MD 20899, USA.
| | - Alexander Orlov
- Department of Materials Science and Chemical Engineering, Stony Brook University, Stony Brook, NY 11794, USA.
| |
Collapse
|
5
|
Nanowaste: Another Future Waste, Its Sources, Release Mechanism, and Removal Strategies in the Environment. SUSTAINABILITY 2022. [DOI: 10.3390/su14042041] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
Nanowaste is defined as waste derived from materials with at least one dimension in the 1–100 nm range. The nanomaterials containing products are considered as “nanoproducts” and they can lead to the development of nanomaterial-containing waste, also termed as “nanowaste”. The increased production and consumption of these engineered nanomaterials (ENMs) and nanoproducts that generate enormous amounts of nanowaste have raised serious concerns about their fate, behavior, and ultimate disposal in the environment. It is of the utmost importance that nanowaste is disposed of in an appropriate manner to avoid an adverse impact on human health and the environment. The unique properties of ENMs, combined with an inadequate understanding of appropriate treatment techniques for many forms of nanowaste, makes nanowaste disposal a complex task. Presently, there is a lack of available information on the optimized standards for identifying, monitoring, and managing nanowaste. Therefore, this review highlights concerns about nanowaste as future waste that need to be addressed. The review focuses on ENMs waste (in the form of NP, nanotubes, nanowires, and quantum dots) generated from the manufacture of a wide variety of nanoproducts that end up as nanowaste and adversely affect the environment. Furthermore, the review considers different types of ENMs in waste streams and environmental compartments (i.e., soil, water, and air). Detailed studies are still required to identify data gaps and implement strategies to remove and control this future waste.
Collapse
|
6
|
Dong M, Chen D, Che L, Gu N, Yin M, Du X, Shen J, Yan S. Biotoxicity Evaluation of a Cationic Star Polymer on a Predatory Ladybird and Cooperative Pest Control by Polymer-Delivered Pesticides and Ladybird. ACS APPLIED MATERIALS & INTERFACES 2022; 14:6083-6092. [PMID: 35072467 DOI: 10.1021/acsami.1c24077] [Citation(s) in RCA: 18] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Although employing nanocarriers for gene/drug delivery shows great potential in agricultural fields, the biotoxicity of nanocarriers is a major concern for large-scale applications. Herein, we synthesized a cationic star polymer (SPc) as a pesticide nanocarrier/adjuvant to evaluate its safety against a widely used predatory ladybird (Harmonia axyridis). The application of SPc at extremely high concentrations nearly did not influence the hatching of ladybird eggs but it led to the death of ladybird larvae at lethal concentration 50 (LC50) values of 43.96 and 19.85 mg/mL through the soaking and feeding methods, respectively. The oral feeding of SPc downregulated many membrane protein genes and lysosome genes significantly, and the cell membrane and nucleus in gut tissues were remarkably damaged by SPc application, revealing that the lethal mechanism might be SPc-mediated membrane damage. Furthermore, the oral feeding of SPc increased the relative abundance of Serratia bacteria in ladybird guts to result in bacterial infection. Coapplication of ladybird and SPc-loaded thiamethoxam/matrine achieved desired control efficacies of more than 80% against green peach aphids, revealing that the coapplication could overcome the slow-acting property of ladybirds. To our knowledge, this is the first attempt to investigate the polymer-mediated lethal mechanism toward natural enemies and explore the possibility of coapplying SPc-loaded pesticides and natural enemies for pest management.
Collapse
Affiliation(s)
- Min Dong
- Department of Plant Biosecurity and MOA Key Lab of Pest Monitoring and Green Management, College of Plant Protection, China Agricultural University, Beijing 100193, P. R. China
| | - Dingming Chen
- Department of Plant Biosecurity and MOA Key Lab of Pest Monitoring and Green Management, College of Plant Protection, China Agricultural University, Beijing 100193, P. R. China
| | - Lin Che
- Department of Plant Biosecurity and MOA Key Lab of Pest Monitoring and Green Management, College of Plant Protection, China Agricultural University, Beijing 100193, P. R. China
| | - Na Gu
- Department of Plant Biosecurity and MOA Key Lab of Pest Monitoring and Green Management, College of Plant Protection, China Agricultural University, Beijing 100193, P. R. China
| | - Meizhen Yin
- State Key Lab of Chemical Resource Engineering, Beijing Lab of Biomedical Materials, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Xiangge Du
- Department of Plant Biosecurity and MOA Key Lab of Pest Monitoring and Green Management, College of Plant Protection, China Agricultural University, Beijing 100193, P. R. China
| | - Jie Shen
- Department of Plant Biosecurity and MOA Key Lab of Pest Monitoring and Green Management, College of Plant Protection, China Agricultural University, Beijing 100193, P. R. China
| | - Shuo Yan
- Department of Plant Biosecurity and MOA Key Lab of Pest Monitoring and Green Management, College of Plant Protection, China Agricultural University, Beijing 100193, P. R. China
| |
Collapse
|
7
|
Abdel Maksoud MIA, Bekhit M, El-Sherif DM, Sofy AR, Sofy MR. Gamma radiation-induced synthesis of a novel chitosan/silver/Mn-Mg ferrite nanocomposite and its impact on cadmium accumulation and translocation in brassica plant growth. Int J Biol Macromol 2022; 194:306-316. [PMID: 34871657 DOI: 10.1016/j.ijbiomac.2021.11.197] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/07/2021] [Revised: 11/22/2021] [Accepted: 11/27/2021] [Indexed: 01/13/2023]
Abstract
Herein, a novel chitosan/silver/Mn0.5Mg0.5Fe2O4 (Cs/Ag/MnMgFe2O4) nanocomposite was synthesized with gamma irradiation assistant. The prepared Cs/Ag/MnMgFe2O4 nanocomposite was characterized via EDX, XRD, SEM, UV-vis spectroscopy. To evaluate the effects of soak low and high-dose nanocomposite on physiological parameters, photosynthetic pigments, antioxidant and non-antioxidant enzymes of cabbage under Cd stress, a factorial experiment was conducted based on CRD with five replications. The Cd stress decreased the morphological characteristics and photosynthetic pigments while increasing cabbage's antioxidant and non-antioxidant enzymes. The application of low and high-dose of nanocomposite decreased Cd content in leaves by about 42.86%, 60.48%, and the root by approximately 18.72%, 28.72%, respectively, and translocation factors and tolerance index, H2O2, O2, and malondialdehyde. In contrast, the application of high of the nanocomposite increased the values of SPAD chlorophyll about 27.50%, stomatal conductance about 87.18%, net photosynthetic rate about 44.90%, intercellular CO2 concentration about 32.00%, and transpiration rate about 85.20%, as compared to Cd stress. Furthermore, the application of low and high-dose Cs/Ag/MnMgFe2O4 nanocomposite enhances the antioxidant and non-antioxidant enzymes of the cabbage plant compared to Cd stress. Generally, it was conducted that Cs/Ag/MnMgFe2O4 nanocomposite can be used as a proper tool for increasing cabbage plants under Cd stress.
Collapse
Affiliation(s)
- M I A Abdel Maksoud
- Radiation Physics Department, National Center for Radiation Research and Technology (NCRRT), Egyptian Atomic Energy Authority (EAEA), Cairo, Egypt.
| | - Mohamad Bekhit
- Radiation Chemistry Department, National Center for Radiation Research and Technology, Egyptian Atomic Energy Authority (EAEA), Cairo, Egypt
| | - Dina M El-Sherif
- National Institute of Oceanography and Fisheries, NIOF, Cairo, Egypt
| | - Ahmed R Sofy
- Botany and Microbiology Department, Faculty of Science, Al-Azhar University, Nasr City 11884, Cairo, Egypt
| | - Mahmoud R Sofy
- Botany and Microbiology Department, Faculty of Science, Al-Azhar University, Nasr City 11884, Cairo, Egypt.
| |
Collapse
|
8
|
Hedmer M, Lovén K, Martinsson J, Messing ME, Gudmundsson A, Pagels J. OUP accepted manuscript. Ann Work Expo Health 2022; 66:878-894. [PMID: 35297480 PMCID: PMC9357347 DOI: 10.1093/annweh/wxac015] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/26/2021] [Revised: 10/27/2021] [Accepted: 02/18/2022] [Indexed: 11/12/2022] Open
Affiliation(s)
- Maria Hedmer
- Author to whom correspondence should be addressed. Tel: +46-46173193; e-mail:
| | - Karin Lovén
- NanoLund, Center for Nanoscience, Lund University, 22100 Lund, Sweden
- Ergonomics and Aerosol Technology, Department of Design Sciences, Lund University, SE-22100 Lund, Sweden
| | - Johan Martinsson
- Medical Radiation Physics, Department of Translational Medicine, Lund University, SE-22100 Lund, Sweden
| | - Maria E Messing
- NanoLund, Center for Nanoscience, Lund University, 22100 Lund, Sweden
- Solid State Physics, Department of Physics, Lund University, SE-22100 Lund, Sweden
| | - Anders Gudmundsson
- NanoLund, Center for Nanoscience, Lund University, 22100 Lund, Sweden
- Ergonomics and Aerosol Technology, Department of Design Sciences, Lund University, SE-22100 Lund, Sweden
| | - Joakim Pagels
- NanoLund, Center for Nanoscience, Lund University, 22100 Lund, Sweden
- Ergonomics and Aerosol Technology, Department of Design Sciences, Lund University, SE-22100 Lund, Sweden
| |
Collapse
|
9
|
Hong H, Adam V, Nowack B. Form-Specific and Probabilistic Environmental Risk Assessment of 3 Engineered Nanomaterials (Nano-Ag, Nano-TiO 2 , and Nano-ZnO) in European Freshwaters. ENVIRONMENTAL TOXICOLOGY AND CHEMISTRY 2021; 40:2629-2639. [PMID: 34171135 PMCID: PMC8457094 DOI: 10.1002/etc.5146] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/21/2021] [Revised: 05/19/2021] [Accepted: 06/23/2021] [Indexed: 05/10/2023]
Abstract
The release of engineered nanomaterials (ENMs) to the environment necessitates an assessment of their environmental risks. The currently available environmental risk assessments (ERA) for ENMs are based on an analysis of the total flows of a specific ENM to the environment and on ecotoxicity studies performed with pristine ENMs. It is known that ENMs undergo transformation during product use and release and in technical systems such as wastewater treatment. The aim of the present study was therefore to perform an ERA of 3 ENMs (nano-Ag, nano-TiO2 , and nano-ZnO) based on a form-specific release model and a form-specific analysis of ecotoxicological data. Predicted environmental concentration values were derived using a form-specific material flow model. Species sensitivity distributions were used to derive predicted-no-effect concentrations (PNECs) for the pristine ENMs and for dissolved and transformed Ag and ZnO. For all ENMs, the matrix-embedded form was included in the assessment. A probabilistic assessment was applied, yielding final probability distributions for the risk characterization ratio (RCR). For nano-Ag, the form-specific assessment resulted in a decrease of the mean RCR from 0.061 for the approach neglecting the different release forms to 0.034 because of the much lower PNEC of transformed Ag. Likewise, for nano-ZnO, the form-specific approach reduced the mean RCR from 1.2 to 0.86. For nano-TiO2 , the form-specific assessment did not change the mean RCR of 0.026. This analysis shows that a form-specific approach can have an influence on the assessment of the environmental risks of ENMs and that, given the availability of form-specific release models, an updated ERA for ENMs can be performed. Environ Toxicol Chem 2021;40:2629-2639. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.
Collapse
Affiliation(s)
- Hyunjoo Hong
- Empa, Swiss Federal Laboratories for Materials Science and Technologies, Technology and Society LaboratorySt. GallenSwitzerland
| | - Véronique Adam
- Empa, Swiss Federal Laboratories for Materials Science and Technologies, Technology and Society LaboratorySt. GallenSwitzerland
| | - Bernd Nowack
- Empa, Swiss Federal Laboratories for Materials Science and Technologies, Technology and Society LaboratorySt. GallenSwitzerland
| |
Collapse
|
10
|
Luo H, Xiang Y, Li Y, Zhao Y, Pan X. Weathering alters surface characteristic of TiO 2-pigmented microplastics and particle size distribution of TiO 2 released into water. THE SCIENCE OF THE TOTAL ENVIRONMENT 2020; 729:139083. [PMID: 32380333 DOI: 10.1016/j.scitotenv.2020.139083] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/30/2020] [Revised: 04/26/2020] [Accepted: 04/26/2020] [Indexed: 06/11/2023]
Abstract
In natural environment, microplastics (MPs) undergo varying degrees of aging. It is believed that aged MPs show different surface properties and leaching behaviors from unaged ones. Here, the effects of aging on surface characteristics of TiO2-pigmented MPs and particle size distribution of TiO2 leached from MPs were systematically investigated. Experimental results show that the carbonyl index and color difference of MPs increased after aging. The increased carbonyl content in MPs was due to photo-oxidation, which further caused the fragility of MPs, the loss of TiO2 pigments and the formation of surface cracks. The decreased weight loss for aged MPs was due to the photo-transformation of LDPE into other compounds. Aged MPs could release more and faster TiO2 particles than unaged MPs, and aged MPs tended to release more large particles (>5 μm) and fewer small particles (<5 μm) than unaged MPs. Aged MPs released TiO2 with particle size uniformly distributed in each size fraction, but unaged MPs mainly released small particles (57.6%-86.2%). With increasing leaching time, the proportion of small particles leached from MPs especially aged MPs decreased and the proportion of large particles increased. These findings will help us better understand how aging process impacts the properties and leaching of MPs and the size distribution of particulate additives leached from MPs.
Collapse
Affiliation(s)
- Hongwei Luo
- Key Laboratory of Microbial Technology for Industrial Pollution Control of Zhejiang Province, College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Yahui Xiang
- Key Laboratory of Microbial Technology for Industrial Pollution Control of Zhejiang Province, College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Yu Li
- Key Laboratory of Microbial Technology for Industrial Pollution Control of Zhejiang Province, College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Yaoyao Zhao
- Key Laboratory of Microbial Technology for Industrial Pollution Control of Zhejiang Province, College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Xiangliang Pan
- Key Laboratory of Microbial Technology for Industrial Pollution Control of Zhejiang Province, College of Environment, Zhejiang University of Technology, Hangzhou 310014, China.
| |
Collapse
|
11
|
Wright MD, Buckley AJ, Smith R. Estimates of carbon nanotube deposition in the lung: improving quality and robustness. Inhal Toxicol 2020; 32:282-298. [PMID: 32689844 DOI: 10.1080/08958378.2020.1785594] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
Abstract
Carbon nanotube (CNT) in vivo inhalation studies are increasingly providing estimates of the quantity of material deposited in the lung, generally estimated using standard formulae and pulmonary deposition models. These models have typically been developed and validated using data from studies using sphere-like particles. Given the importance of particle morphology to pulmonary deposition, the appropriateness of such an approach was explored to identify any potential limitations. Aerosolized CNT particles typically form 'fiber-like' and/or 'broadly spherical' agglomerates. A review of currently used deposition models indicates that none have been directly validated against results for CNT, however, models for spherical particles have been extensively validated against a wide range of particle sizes and materials and are thus expected to provide reasonable estimates for most 'broadly spherical' CNT particles, although experimental confirmation of this would be of benefit, especially given their low density. The validation of fiber deposition models is significantly less extensive and, in general, focused on larger particles, e.g. asbestos. This raises concerns about the accuracy of deposition estimates for 'fiber-like' CNT particles and recommendations are made for future research to address this. An appreciation of the uncertainties on CNT deposition estimates is important for their interpretation and thus it is recommended that model sensitivity and uncertainty assessments be undertaken. Issues surrounding the measurement and derivation of model input data are also addressed, including instrument responses and particle density assessment options. Recommendations are also made for aerosol characterization to 'future-proof' CNT inhalation studies regarding advances in deposition modeling and toxicological understanding.
Collapse
Affiliation(s)
- Matthew D Wright
- Centre for Radiation, Chemical and Environmental Hazards (CRCE), Public Health England (PHE), Chilton, UK
| | - Alison J Buckley
- Centre for Radiation, Chemical and Environmental Hazards (CRCE), Public Health England (PHE), Chilton, UK
| | - Rachel Smith
- Centre for Radiation, Chemical and Environmental Hazards (CRCE), Public Health England (PHE), Chilton, UK
| |
Collapse
|
12
|
Zepp R, Ruggiero E, Acrey B, Davis MJB, Han C, Hsieh HS, Vilsmeier K, Wohlleben W, Sahle-Demessie E. Fragmentation of polymer nanocomposites: modulation by dry and wet weathering, fractionation, and nanomaterial filler. ENVIRONMENTAL SCIENCE. NANO 2020; 7:1742-1758. [PMID: 33564464 PMCID: PMC7869489 DOI: 10.1039/c9en01360a] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
In recent years, an increasing number of polymeric composites incorporating engineered nanomaterials (ENMs) have reached the market. Such nano-enabled products (NEPs) present enhanced performance through improved mechanical, thermal, UV protection, electrical, and gas barrier properties. However, little is known about how environmental weathering impacts ENM release, especially for high-tonnage NEPs like kaolin products, which have not been extensively examined by the scientific community. Here we study the simulated environmental weathering of different polymeric nanocomposites (epoxy, polyamide, polypropylene) filled with organic (multiwalled carbon nanotube, graphene, carbon black) and inorganic (WS2, SiO2, kaolin, Fe2O3, Cu-phthalocyanines) ENMs. Multiple techniques were employed by researchers at three laboratories to extensively evaluate the effect of weathering: ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), optical microscopy, contact angle measurements, gravimetric analysis, analytical ultracentrifugation (AUC), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Raman spectroscopy. This work aimed to elucidate the extent to which weathering protocol (i.e. wet vs. dry) and diverse filler characteristics modulate fragment release and polymer matrix degradation. In doing so, it expanded the established NanoRelease protocol, previously used for analyzing fragment emission, by evaluating two significant additions: (1) simulated weathering with rain events and (2) fractionation of sample leachate prior to analysis. Comparing different composite materials and protocols demonstrated that the polymer matrix is the most significant factor in NEP aging. Wet weathering is more realistic than dry weathering, but dry weathering seems to provide a more controlled release of material over wet. Wet weathering studies could be complicated by leaching, and the addition of a fractionation step can improve the quality of UV-vis measurements.
Collapse
Affiliation(s)
- Richard Zepp
- U.S. Environmental Protection Agency (EPA), Office of Research and Development (ORD), Center for Environmental Measurement and Modeling (CEMM), 960 College Station Rd., Athens, GA, USA
| | - Emmanuel Ruggiero
- BASF SE, Dept. Material Physics and Analytics, 67056, Ludwigshafen, Germany
| | - Brad Acrey
- U.S. Environmental Protection Agency (EPA), Office of Research and Development (ORD), Center for Environmental Measurement and Modeling (CEMM), 960 College Station Rd., Athens, GA, USA
- ORISE Research Fellow, Oak Ridge Institute for Science and Education (ORISE), Oak Ridge, TN 37830, USA
| | - Mary J B Davis
- U.S. Environmental Protection Agency (EPA), Office of Research and Development (ORD), Center for Environmental Measurement and Modeling (CEMM), 960 College Station Rd., Athens, GA, USA
- NRC Post-Doctoral Fellow, National Research Council (NRC), Washington DC, USA
| | - Changseok Han
- ORISE Research Fellow, Oak Ridge Institute for Science and Education (ORISE), Oak Ridge, TN 37830, USA
- EPA, ORD, Center for Environmental Solutions and Emergency Response (CESER), Cincinnati, OH, USA
- Department of Environmental Engineering, INHA University, Incheon, Korea
| | - Hsin-Se Hsieh
- U.S. Environmental Protection Agency (EPA), Office of Research and Development (ORD), Center for Environmental Measurement and Modeling (CEMM), 960 College Station Rd., Athens, GA, USA
- NRC Post-Doctoral Fellow, National Research Council (NRC), Washington DC, USA
| | - Klaus Vilsmeier
- BASF SE, Dept. Material Physics and Analytics, 67056, Ludwigshafen, Germany
| | - Wendel Wohlleben
- BASF SE, Dept. Material Physics and Analytics, 67056, Ludwigshafen, Germany
| | | |
Collapse
|
13
|
Ogura I, Kotake M, Ata S. Quantitative evaluation of carbon nanomaterial releases during electric heating wire cutting and sawing machine cutting of expanded polystyrene-based composites using thermal carbon analysis. JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE 2019; 16:165-178. [PMID: 30427298 DOI: 10.1080/15459624.2018.1540874] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Field measurements were conducted at a facility where expanded polystyrene-based carbon nanomaterial composites, namely, carbon nanotube and carbon black composites, were cut with an electric heating wire cutter or a circular sawing machine. The aerosol particles released during the cutting of the composites were measured using real-time aerosol monitoring, gravimetric analysis, thermal carbon analysis, and scanning electron microscopic observations. This study had two major goals: (1) to quantitatively evaluate the concentrations of airborne carbon nanomaterials during the cutting of their composites; (2) to evaluate the capability of thermal carbon analysis to quantify airborne carbon nanomaterials in the presence of expanded polystyrene-derived particles. The results of thermal carbon analysis showed that the concentrations of elemental carbon (an indicator of carbon nanomaterials) for all the respirable dust samples in both cutting processes were less than the limit of detection (∼2 µg/m3), which is nearly equivalent to or lower than the occupational exposure limits for carbon nanotubes (1 to 50 µg/m3). For total dust, which includes particles larger than respirable size, although the elemental carbon concentrations during heating wire cutting were low (<3 µg/m3), those during sawing machine cutting were up to 58 µg/m3. In scanning electron microscopic observations, micron-sized particles composed of or including carbon nanotubes were detected only in aerosol particles collected during the sawing machine cutting. Therefore, heating wire cutting is considered preferable. This study demonstrated that thermal carbon analysis can quantify airborne carbon nanomaterials in the presence of expanded polystyrene-derived particles.
Collapse
Affiliation(s)
- Isamu Ogura
- a Research Institute of Science for Safety and Sustainability, National Institute of Advanced Industrial Science and Technology (AIST) , Ibaraki , Japan
- b Technology Research Association for Single Wall Carbon Nanotubes (TASC) , Ibaraki , Japan
| | - Mari Kotake
- b Technology Research Association for Single Wall Carbon Nanotubes (TASC) , Ibaraki , Japan
| | - Seisuke Ata
- b Technology Research Association for Single Wall Carbon Nanotubes (TASC) , Ibaraki , Japan
- c CNT-Application Research Center, National Institute of Advanced Industrial Science and Technology (AIST) , Ibaraki , Japan
| |
Collapse
|
14
|
Phan DC, Goodwin DG, Frank BP, Bouwer EJ, Fairbrother DH. Biodegradability of carbon nanotube/polymer nanocomposites under aerobic mixed culture conditions. THE SCIENCE OF THE TOTAL ENVIRONMENT 2018; 639:804-814. [PMID: 29803051 DOI: 10.1016/j.scitotenv.2018.05.137] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/08/2018] [Revised: 05/09/2018] [Accepted: 05/11/2018] [Indexed: 06/08/2023]
Abstract
The properties and commercial viability of biodegradable polymers can be significantly enhanced by the incorporation of carbon nanotubes (CNTs). The environmental impact and persistence of these carbon nanotube/polymer nanocomposites (CNT/PNCs) after disposal will be strongly influenced by their microbial interactions, including their biodegradation rates. At the end of consumer use, CNT/PNCs will encounter diverse communities of microorganisms in landfills, surface waters, and wastewater treatment plants. To explore CNT/PNC biodegradation under realistic environmental conditions, the effect of multi-wall CNT (MWCNT) incorporation on the biodegradation of polyhydroxyalkanoates (PHA) was investigated using a mixed culture of microorganisms from wastewater. Relative to unfilled PHA (0% w/w), the MWCNT loading (0.5-10% w/w) had no statistically significant effect on the rate of PHA matrix biodegradation. Independent of the MWCNT loading, the extent of CNT/PNC mass remaining closely corresponded to the initial mass of CNTs in the matrix suggesting a lack of CNT release. CNT/PNC biodegradation was complete in approximately 20 days and resulted in the formation of a compressed CNT mat that retained the shape of the initial CNT/PNC. This study suggests that although CNTs have been shown to be cytotoxic towards a range of different microorganisms, this does not necessarily impact the biodegradation of the surrounding polymer matrix in mixed culture, particularly in situations where the polymer type and/or microbial population favor rapid polymer biodegradation.
Collapse
Affiliation(s)
- Duc C Phan
- Department of Environmental Health and Engineering, Johns Hopkins University, Baltimore, MD 21218, United States; Department of Civil and Environmental Engineering, The University of Texas at San Antonio, San Antonio, TX 78249, United States
| | - David G Goodwin
- Department of Chemistry, Johns Hopkins University, Baltimore, MD 21218, United States
| | - Benjamin P Frank
- Department of Chemistry, Johns Hopkins University, Baltimore, MD 21218, United States
| | - Edward J Bouwer
- Department of Environmental Health and Engineering, Johns Hopkins University, Baltimore, MD 21218, United States
| | - D Howard Fairbrother
- Department of Chemistry, Johns Hopkins University, Baltimore, MD 21218, United States.
| |
Collapse
|
15
|
Leshuk T, Peru KM, de Oliveira Livera D, Tripp A, Bardo P, Headley JV, Gu F. Petroleomic analysis of the treatment of naphthenic organics in oil sands process-affected water with buoyant photocatalysts. WATER RESEARCH 2018; 141:297-306. [PMID: 29803095 DOI: 10.1016/j.watres.2018.05.011] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/04/2018] [Revised: 05/08/2018] [Accepted: 05/09/2018] [Indexed: 06/08/2023]
Abstract
The persistence of toxicity associated with the soluble naphthenic organic compounds (NOCs) of oil sands process-affected water (OSPW) implies that a treatment solution may be necessary to enable safe return of this water to the environment. Due to recent advances in high-resolution mass spectrometry (HRMS), the majority of the toxicity of OSPW is currently understood to derive from a subset of toxic classes, comprising only a minority of the total NOCs. Herein, oxidative treatment of OSPW with buoyant photocatalysts was evaluated under a petroleomics paradigm: chemical changes across acid-, base- and neutral-extractable organic fractions were tracked throughout the treatment with both positive and negative ion mode electrospray ionization (ESI) Orbitrap MS. Elimination of detected OS+ and NO+ classes of concern in the earliest stages of the treatment, along with preferential degradation of high carbon-numbered O2- acids, suggest that photocatalysis may detoxify OSPW with higher efficiency than previously thought. Application of petroleomic level analysis offers unprecedented insights into the treatment of petroleum impacted water, allowing reaction trends to be followed across multiple fractions and thousands of compounds simultaneously.
Collapse
Affiliation(s)
- Tim Leshuk
- Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada; Waterloo Institute for Nanotechnology, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
| | - Kerry M Peru
- Water Science and Technology Directorate, Environment & Climate Change Canada, Saskatoon, Saskatchewan S7N 3H5, Canada
| | - Diogo de Oliveira Livera
- Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada; Waterloo Institute for Nanotechnology, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
| | - Austin Tripp
- Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada; Waterloo Institute for Nanotechnology, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
| | - Patrick Bardo
- Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada; Waterloo Institute for Nanotechnology, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
| | - John V Headley
- Water Science and Technology Directorate, Environment & Climate Change Canada, Saskatoon, Saskatchewan S7N 3H5, Canada
| | - Frank Gu
- Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada; Waterloo Institute for Nanotechnology, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada.
| |
Collapse
|
16
|
Ding T, Lin K, Chen J, Hu Q, Yang B, Li J, Gan J. Causes and mechanisms on the toxicity of layered double hydroxide (LDH) to green algae Scenedesmus quadricauda. THE SCIENCE OF THE TOTAL ENVIRONMENT 2018; 635:1004-1011. [PMID: 29710556 DOI: 10.1016/j.scitotenv.2018.04.222] [Citation(s) in RCA: 25] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/05/2018] [Revised: 04/15/2018] [Accepted: 04/16/2018] [Indexed: 05/12/2023]
Abstract
Layered double hydroxides (LDHs) are widely used nanomaterials in industrial catalysis, pharmaceuticals, and environmental remediation, and may pose potential negative effects in the aquatic environment. However, little information is available on their toxicity to aquatic organisms. In this study, toxicity of LDH to a typical freshwater green algae Scenedesmus quadricauda was systematically investigated and the underlying mechanisms were elucidated. The growth of S. quadricauda was significantly inhibited by LDH at 72 h with a half maximal effective concentration (EC50) and lowest observed effect concentration (LOEC) of 10.0 and 1.5 mg L-1, respectively. Shading effect was observed, and the photosynthetic activity and cellular chlorophyll production were also severely suppressed by LDH. LDH also enhanced the reactive oxygen species production from S. quadricauda and lipid peroxidation in algal cells. Such algal toxicity of LDH might be mainly induced by the shading effect, agglomeration and physical interactions, and oxidative stress. The agglomeration and physical interactions contributed more to the algal toxicity at 72 h-EC50 LDH concentrations. The results from the present study provided new insights and a better understanding of the environmental behavior and adverse effects of LDHs in the surface waters.
Collapse
Affiliation(s)
- Tengda Ding
- Shenzhen Key Laboratory of Environmental Chemistry and Ecological Remediation, College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060, China; State Key Laboratory of Marine Environmental Science, Key Laboratory of the Ministry of Education for Coastal and Wetland Ecosystem, College of the Environment and Ecology, Xiamen University, Xiamen 361005, China
| | - Kunde Lin
- State Key Laboratory of Marine Environmental Science, Key Laboratory of the Ministry of Education for Coastal and Wetland Ecosystem, College of the Environment and Ecology, Xiamen University, Xiamen 361005, China
| | - Jin Chen
- Core Facilities, School of Medicine, Zhejiang University, Hangzhou 310058, China
| | - Qi Hu
- Shenzhen Key Laboratory of Environmental Chemistry and Ecological Remediation, College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060, China
| | - Bo Yang
- Shenzhen Key Laboratory of Environmental Chemistry and Ecological Remediation, College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060, China
| | - Juying Li
- Shenzhen Key Laboratory of Environmental Chemistry and Ecological Remediation, College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060, China.
| | - Jay Gan
- Department of Environmental Sciences, University of California, Riverside, CA 92521, United States
| |
Collapse
|
17
|
Kumar S, Sarita, Nehra M, Dilbaghi N, Tankeshwar K, Kim KH. Recent advances and remaining challenges for polymeric nanocomposites in healthcare applications. Prog Polym Sci 2018. [DOI: 10.1016/j.progpolymsci.2018.03.001] [Citation(s) in RCA: 108] [Impact Index Per Article: 18.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
18
|
Amorim MJB, Lin S, Schlich K, Navas JM, Brunelli A, Neubauer N, Vilsmeier K, Costa AL, Gondikas A, Xia T, Galbis L, Badetti E, Marcomini A, Hristozov D, Kammer FVD, Hund-Rinke K, Scott-Fordsmand JJ, Nel A, Wohlleben W. Environmental Impacts by Fragments Released from Nanoenabled Products: A Multiassay, Multimaterial Exploration by the SUN Approach. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2018; 52:1514-1524. [PMID: 29376638 DOI: 10.1021/acs.est.7b04122] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Nanoenabled products (NEPs) have numerous outdoor uses in construction, transportation or consumer scenarios, and there is evidence that their fragments are released in the environment at low rates. We hypothesized that the lower surface availability of NEPs fragment reduced their environmental effects with respect to pristine nanomaterials. This hypothesis was explored by testing fragments generated by intentional micronisation ("the SUN approach"; Nowack et al. Meeting the Needs for Released Nanomaterials Required for Further Testing: The SUN Approach. Environmental Science & Technology, 2016 (50), 2747). The NEPs were composed of four matrices (epoxy, polyolefin, polyoxymethylene, and cement) with up to 5% content of three nanomaterials (carbon nanotubes, iron oxide, and organic pigment). Regardless of the type of nanomaterial or matrix used, it was observed that nanomaterials were only partially exposed at the NEP fragment surface, indicating that mostly the intrinsic and extrinsic properties of the matrix drove the NEP fragment toxicity. Ecotoxicity in multiple assays was done covering relevant media from terrestrial to aquatic, including sewage treatment plant (biological activity), soil worms (Enchytraeus crypticus), and fish (zebrafish embryo and larvae and trout cell lines). We designed the studies to explore the possible modulation of ecotoxicity by nanomaterial additives in plastics/polymer/cement, finding none. The results support NEPs grouping by the matrix material regarding ecotoxicological effect during the use phase. Furthermore, control results on nanomaterial-free polymer fragments representing microplastic had no significant adverse effects up to the highest concentration tested.
Collapse
Affiliation(s)
- Mónica J B Amorim
- Department of Biology and CESAM, University of Aveiro , 3810-193, Aveiro, Portugal
| | - Sijie Lin
- College of Environmental Science and Engineering, State Key Laboratory of Pollution Control and Resource Reuse, Tongji University , Shanghai 200092, China
- Division of NanoMedicine, Department of Medicine, Center for Environmental Implications of Nanotechnology, California NanoSystems Institute, University of California , Los Angeles, California 90095, United States
| | - Karsten Schlich
- Department of Ecotoxicology, Fraunhofer Institute for Molecular Biology and Applied Ecology , Auf dem Aberg 1, 57392 Schmallenberg, Germany
| | - José M Navas
- Department of Environment, Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria (INIA) , Centra De la Coruña Km 7.5, E-28040 Madrid, Spain
| | - Andrea Brunelli
- Department of Environmental Sciences, Informatics and Statistics (DAIS), University Ca' Foscari of Venice , Via Torino 155, 30170 Venice Mestre, Italy
| | - Nicole Neubauer
- Department of Material Physics, BASF SE , Carl-Bosch-Strasse 38, 67056 Ludwigshafen, Germany
| | - Klaus Vilsmeier
- Department of Material Physics, BASF SE , Carl-Bosch-Strasse 38, 67056 Ludwigshafen, Germany
| | - Anna L Costa
- National Research Council of Italy, Institute of Science and Technology for Ceramics (CNR-ISTEC) , Via Granarolo, 64, I-48018 Faenza, Italy
| | - Andreas Gondikas
- Department of Environmental Geosciences, University of Vienna , 1090 Vienna, Austria
| | - Tian Xia
- Division of NanoMedicine, Department of Medicine, Center for Environmental Implications of Nanotechnology, California NanoSystems Institute, University of California , Los Angeles, California 90095, United States
| | - Liliana Galbis
- Department of Environment, Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria (INIA) , Centra De la Coruña Km 7.5, E-28040 Madrid, Spain
| | - Elena Badetti
- Department of Environmental Sciences, Informatics and Statistics (DAIS), University Ca' Foscari of Venice , Via Torino 155, 30170 Venice Mestre, Italy
| | - Antonio Marcomini
- Department of Environmental Sciences, Informatics and Statistics (DAIS), University Ca' Foscari of Venice , Via Torino 155, 30170 Venice Mestre, Italy
| | - Danail Hristozov
- Department of Environmental Sciences, Informatics and Statistics (DAIS), University Ca' Foscari of Venice , Via Torino 155, 30170 Venice Mestre, Italy
| | - Frank von der Kammer
- Department of Environmental Geosciences, University of Vienna , 1090 Vienna, Austria
| | - Kerstin Hund-Rinke
- Department of Ecotoxicology, Fraunhofer Institute for Molecular Biology and Applied Ecology , Auf dem Aberg 1, 57392 Schmallenberg, Germany
| | | | - André Nel
- Division of NanoMedicine, Department of Medicine, Center for Environmental Implications of Nanotechnology, California NanoSystems Institute, University of California , Los Angeles, California 90095, United States
| | - Wendel Wohlleben
- Department of Material Physics, BASF SE , Carl-Bosch-Strasse 38, 67056 Ludwigshafen, Germany
- Department of Experimental Toxicology and Ecology, BASF SE , D-67056 Ludwigshafen, Germany
| |
Collapse
|
19
|
Neubauer N, Scifo L, Navratilova J, Gondikas A, Mackevica A, Borschneck D, Chaurand P, Vidal V, Rose J, von der Kammer F, Wohlleben W. Nanoscale Coloristic Pigments: Upper Limits on Releases from Pigmented Plastic during Environmental Aging, In Food Contact, and by Leaching. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2017; 51:11669-11680. [PMID: 28988475 DOI: 10.1021/acs.est.7b02578] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
The life cycle of nanoscale pigments in plastics may cause environmental or human exposure by various release scenarios. We investigated spontaneous and induced release with mechanical stress during/after simulated sunlight and rain degradation of polyethylene (PE) with organic and inorganic pigments. Additionally, primary leaching in food contact and secondary leaching from nanocomposite fragments with an increased surface into environmental media was examined. Standardized protocols/methods for release sampling, detection, and characterization of release rate and form were applied: Transformation of the bulk material was analyzed by Scanning Electron Microscopy (SEM), X-ray-tomography and Fourier-Transform Infrared spectroscopy (FTIR); releases were quantified by Inductively Coupled Plasma Mass Spectrometry (ICP-MS), single-particle-ICP-MS (sp-ICP-MS), Transmission Electron Microscopy (TEM), Analytical Ultracentrifugation (AUC), and UV/Vis spectroscopy. In all scenarios, the detectable particulate releases were attributed primarily to contaminations from handling and machining of the plastics, and were not identified with the pigments, although the contamination of 4 mg/kg (Fe) was dwarfed by the intentional content of 5800 mg/kg (Fe as Fe2O3 pigment). We observed modulations (which were at least partially preventable by UV stabilizers) when comparing as-produced and aged nanocomposites, but no significant increase of releases. Release of pigments was negligible within the experimental error for all investigated scenarios, with upper limits of 10 mg/m2 or 1600 particles/mL. This is the first holistic confirmation that pigment nanomaterials remain strongly contained in a plastic that has low diffusion and high persistence such as the polyolefin High Density Polyethylene (HDPE).
Collapse
Affiliation(s)
- Nicole Neubauer
- BASF SE, Material Physics, GMC/R, Carl-Bosch-Strasse 38, 67056 Ludwigshafen, Germany
| | - Lorette Scifo
- CEREGE UR 34 Aix Marseille University - CNRS - IRD , 13545, Marseille, Aix-en-Provence France
| | - Jana Navratilova
- University of Vienna , Department of Environmental Geosciences, 1090 Vienna, Austria
| | - Andreas Gondikas
- University of Vienna , Department of Environmental Geosciences, 1090 Vienna, Austria
| | - Aiga Mackevica
- Technical University of Denmark , Department of Environmental Engineering, 2800 Kgs. Lyngby, Denmark
| | - Daniel Borschneck
- CEREGE UR 34 Aix Marseille University - CNRS - IRD , 13545, Marseille, Aix-en-Provence France
| | - Perrine Chaurand
- CEREGE UR 34 Aix Marseille University - CNRS - IRD , 13545, Marseille, Aix-en-Provence France
| | - Vladimir Vidal
- CEREGE UR 34 Aix Marseille University - CNRS - IRD , 13545, Marseille, Aix-en-Provence France
| | - Jerome Rose
- CEREGE UR 34 Aix Marseille University - CNRS - IRD , 13545, Marseille, Aix-en-Provence France
| | - Frank von der Kammer
- University of Vienna , Department of Environmental Geosciences, 1090 Vienna, Austria
| | - Wendel Wohlleben
- BASF SE, Material Physics, GMC/R, Carl-Bosch-Strasse 38, 67056 Ludwigshafen, Germany
| |
Collapse
|
20
|
Nguyen T, Petersen EJ, Pellegrin B, Gorham JM, Lam T, Zhao M, Sung L. Impact of UV irradiation on multiwall carbon nanotubes in nanocomposites: formation of entangled surface layer and mechanisms of release resistance. CARBON 2017; 116:191-200. [PMID: 28603293 PMCID: PMC5460675 DOI: 10.1016/j.carbon.2017.01.097] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
Multiwall carbon nanotubes (MWCNTs) are nanofillers used in consumer and structural polymeric products to enhance a variety of properties. Under weathering, the polymer matrix will degrade and the nanofillers may be released from the products potentially impacting ecological or human health. In this study, we investigated the degradation of a 0.72 % (by mass) MWCNT/amine-cured epoxy nanocomposite irradiated with high intensity ultraviolet (UV) light at various doses, the effects of UV exposure on the surface accumulation and potential release of MWCNTs, and possible mechanisms for the release resistance of the MWCNT surface layer formed on nanocomposites by UV irradiation. Irradiated samples were characterized for chemical degradation, mass loss, surface morphological changes, and MWCNT release using a variety of analytical techniques. Under 295 nm to 400 nm UV radiation up to a dose of 4865 MJ/m2, the nanocomposite matrix underwent photodegradation, resulting in formation of a dense, entangled MWCNT network structure on the surface. However, no MWCNT release was detected, even at very high UV doses, suggesting that the MWCNT surface layer formed from UV irradiation of polymer nanocomposites resist release. Four possible release resistance mechanisms of the UV-induced MWCNT surface layer are presented and discussed.
Collapse
Affiliation(s)
- Tinh Nguyen
- National Institute of Standards and Technology (NIST), Gaithersburg, Maryland 20899
| | - Elijah J Petersen
- National Institute of Standards and Technology (NIST), Gaithersburg, Maryland 20899
| | - Bastien Pellegrin
- National Institute of Standards and Technology (NIST), Gaithersburg, Maryland 20899
| | - Justin M Gorham
- National Institute of Standards and Technology (NIST), Gaithersburg, Maryland 20899
| | - Thomas Lam
- National Institute of Standards and Technology (NIST), Gaithersburg, Maryland 20899
| | - Minhua Zhao
- National Institute of Standards and Technology (NIST), Gaithersburg, Maryland 20899
| | - Lipiin Sung
- National Institute of Standards and Technology (NIST), Gaithersburg, Maryland 20899
| |
Collapse
|
21
|
Wohlleben W, Kingston C, Carter J, Sahle-Demessie E, Vázquez-Campos S, Acrey B, Chen CY, Walton E, Egenolf H, Müller P, Zepp R. NanoRelease: Pilot interlaboratory comparison of a weathering protocol applied to resilient and labile polymers with and without embedded carbon nanotubes. CARBON 2017; 113:346-360. [PMID: 30147114 PMCID: PMC6104645 DOI: 10.1016/j.carbon.2016.11.011] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/21/2023]
Abstract
A major use of multi-walled carbon nanotubes (MWCNTs) is as functional fillers embedded in a solid matrix, such as plastics or coatings. Weathering and abrasion of the solid matrix during use can lead to environmental releases of the MWCNTs. Here we focus on a protocol to identify and quantify the primary release induced by weathering, and assess reproducibility, transferability, and sensitivity towards different materials and uses. We prepared 132 specimens of two polymer-MWCNT composites containing the same grade of MWCNTs used in earlier OECD hazard assessments but without UV stabilizer. We report on a pilot inter-laboratory comparison (ILC) with four labs (two US and two EU) aging by UV and rain, then shipping for analysis. Two labs (one US and one EU) conducted the release sampling and analysis by Transmission Electron Microscopy (TEM), Inductively Coupled Plasma- Mass Spectrometry (ICP-MS), UltravioleteVisible Spectroscopy (UVeVis), Analytical Ultracentrifugation (AUC), and Asymmetric Flow Field Flow Fractionation (AF4). We compare results between aging labs, between analysis labs and between materials. Surprisingly, we found quantitative agreement between analysis labs for TEM, ICP-MS, UVeVis; low variation between aging labs by all methods; and consistent rankings of release between TEM, ICP-MS, UVeVis, AUC. Significant disagreement was related primarily to differences in aging, but even these cases remained within a factor of two.
Collapse
Affiliation(s)
- Wendel Wohlleben
- BASF SE, Dept. Material Physics and Analytics, 67056, Ludwigshafen, Germany
| | | | - Janet Carter
- Occupational Safety and Health Administration (OSHA), USA
| | - E. Sahle-Demessie
- U.S. Environmental Protection Agency (EPA), Office of Research and Development (ORD), National Risk Management Research Laboratory (NRMRL), Cincinnati, OH, USA
| | | | - Brad Acrey
- EPA, ORD, National Exposure Research Laboratory (NERL), 960 College Station Rd., Athens, GA, USA
- Student Services Associate
| | - Chia-Ying Chen
- EPA, ORD, National Exposure Research Laboratory (NERL), 960 College Station Rd., Athens, GA, USA
- National Research Council Associate
| | - Ernest Walton
- EPA, Region 4, Science and Ecosystem Support Division (SESD), Athens, GA, USA
| | - Heiko Egenolf
- BASF SE, Dept. Material Physics and Analytics, 67056, Ludwigshafen, Germany
| | - Philipp Müller
- BASF SE, Dept. Material Physics and Analytics, 67056, Ludwigshafen, Germany
| | - Richard Zepp
- EPA, ORD, National Exposure Research Laboratory (NERL), 960 College Station Rd., Athens, GA, USA
- Corresponding author. (R. Zepp)
| |
Collapse
|
22
|
Wang J, Schlagenhauf L, Setyan A. Transformation of the released asbestos, carbon fibers and carbon nanotubes from composite materials and the changes of their potential health impacts. J Nanobiotechnology 2017; 15:15. [PMID: 28219381 PMCID: PMC5319145 DOI: 10.1186/s12951-017-0248-7] [Citation(s) in RCA: 26] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2016] [Accepted: 02/10/2017] [Indexed: 12/11/2022] Open
Abstract
Composite materials with fibrous reinforcement often provide superior mechanical, thermal, electrical and optical properties than the matrix. Asbestos, carbon fibers and carbon nanotubes (CNTs) have been widely used in composites with profound impacts not only on technology and economy but also on human health and environment. A large number of studies have been dedicated to the release of fibrous particles from composites. Here we focus on the transformation of the fibrous fillers after their release, especially the change of the properties essential for the health impacts. Asbestos fibers exist in a large number of products and the end-of-the-life treatment of asbestos-containing materials poses potential risks. Thermal treatment can transform asbestos to non-hazardous phase which provides opportunities of safe disposal of asbestos-containing materials by incineration, but challenges still exist. Carbon fibers with diameters in the range of 5–10 μm are not considered to be respirable, however, during the release process from composites, the carbon fibers may be split along the fiber axis, generating smaller and respirable fibers. CNTs may be exposed on the surface of the composites or released as free standing fibers, which have lengths shorter than the original ones. CNTs have high thermal stability and may be exposed after thermal treatment of the composites and still keep their structural integrity. Due to the transformation of the fibrous fillers during the release process, their toxicity may be significantly different from the virgin fibers, which should be taken into account in the risk assessment of fiber-containing composites.
Collapse
Affiliation(s)
- Jing Wang
- Institute of Environmental Engineering, ETH Zurich, 8093, Zurich, Switzerland. .,Advanced Analytical Technologies, Empa, Ueberlandstrasse 129, 8600, Dübendorf, Switzerland.
| | - Lukas Schlagenhauf
- Institute of Environmental Engineering, ETH Zurich, 8093, Zurich, Switzerland.,Advanced Analytical Technologies, Empa, Ueberlandstrasse 129, 8600, Dübendorf, Switzerland
| | - Ari Setyan
- Institute of Environmental Engineering, ETH Zurich, 8093, Zurich, Switzerland.,Advanced Analytical Technologies, Empa, Ueberlandstrasse 129, 8600, Dübendorf, Switzerland
| |
Collapse
|
23
|
Rhiem S, Barthel AK, Meyer-Plath A, Hennig MP, Wachtendorf V, Sturm H, Schäffer A, Maes HM. Release of (14)C-labelled carbon nanotubes from polycarbonate composites. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2016; 215:356-365. [PMID: 27194367 DOI: 10.1016/j.envpol.2016.04.098] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/11/2016] [Revised: 04/27/2016] [Accepted: 04/29/2016] [Indexed: 06/05/2023]
Abstract
Waste disposal of carbon nanotube (CNT) containing products is expected to be the most important pathway for release of CNTs into the environment. In the present work, the use of radiolabelled CNTs ((14)C-CNT) for polycarbonate polymer nanocomposites with 1 wt% (14)C-CNT content allowed for the first time to quantify and differentiate the CNT release according to the type of impact along the materials' ageing history. After an initial exposure of the nanocomposite by solar-like irradiation, further environmental impacts were applied to composite material. They aimed at mimicking disposal site conditions that may induce further ageing effects and CNT release. This study included shaking in water, rapid temperature changes, soaking in humic acid solution as well as waste water effluent, and, finally, gentle mechanical abrasion. All ageing impacts were applied sequentially, both on pristine (control) and on solar-irradiated nanocomposites. All experiments were accompanied by absolute quantification of radioactive release as well as chemical and morphological analyses of the nanocomposite surfaces using infra-red (IR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The morphological analysis showed that spectral irradiation can uncover CNT networks on the outer nanocomposite surface layers by polymer degradation. After having subjected the solar-irradiated nanocomposite to all studied disposal site effect, the total radioactive release was quantified to amount to 64 mg CNT/m(2), whereas only 0.8 mg CNT/m(2) were found for the un-irradiated control sample. Solar degradation of polymers was thus found to significantly increase the propensity of the studied polymer nanocomposites to release CNTs during ageing effects at the product's end-of-life typical for disposal sites.
Collapse
Affiliation(s)
- Stefan Rhiem
- Institute for Environmental Research (Biology V), RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany
| | - Anne-Kathrin Barthel
- Bundesanstalt für Materialforschung und -prüfung (BAM), Unter den Eichen 87, 12205 Berlin, Germany
| | - Asmus Meyer-Plath
- BAuA - Federal Institute for Occupational Safety and Health, Nöldnerstr. 40-42, 10317 Berlin, Germany
| | - Michael P Hennig
- Institute for Environmental Research (Biology V), RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany
| | - Volker Wachtendorf
- Bundesanstalt für Materialforschung und -prüfung (BAM), Unter den Eichen 87, 12205 Berlin, Germany
| | - Heinz Sturm
- Bundesanstalt für Materialforschung und -prüfung (BAM), Unter den Eichen 87, 12205 Berlin, Germany
| | - Andreas Schäffer
- Institute for Environmental Research (Biology V), RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany
| | - Hanna M Maes
- Institute for Environmental Research (Biology V), RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany.
| |
Collapse
|
24
|
Caballero-Guzman A, Nowack B. A critical review of engineered nanomaterial release data: Are current data useful for material flow modeling? ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2016; 213:502-517. [PMID: 26970875 DOI: 10.1016/j.envpol.2016.02.028] [Citation(s) in RCA: 47] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/05/2015] [Revised: 02/12/2016] [Accepted: 02/16/2016] [Indexed: 05/29/2023]
Abstract
Material flow analysis (MFA) is a useful tool to predict the flows of engineered nanomaterials (ENM) to the environment. The quantification of release factors is a crucial part of MFA modeling. In the last years an increasing amount of literature on release of ENM from materials and products has been published. The purpose of this review is to analyze the strategies implemented by MFA models to include these release data, in particular to derive transfer coefficients (TC). Our scope was focused on those articles that analyzed the release from applications readily available in the market in settings that resemble average use conditions. Current MFA studies rely to a large extent on extrapolations, authors' assumptions, expert opinions and other informal sources of data to parameterize the models. We were able to qualitatively assess the following aspects of the release literature: (i) the initial characterization of ENM provided, (ii) quantitative information on the mass of ENM released and its characterization, (iii) description of transformation reactions and (iv) assessment of the factors determining release. Although the literature on ENM release is growing, coverage of exposure scenarios is still limited; only 20% of the ENMs used industrially and 36% of the product categories involved have been investigated in release studies and only few relevant release scenarios have been described. Furthermore, the information provided is rather incomplete concerning descriptions and characterizations of ENMs and the released materials. Our results show that both the development of methods to define the TCs and of protocols to enhance assessment of ENM release from nano-applications will contribute to increase the exploitability of the data provided for MFA models. The suggestions we provide in this article will likely contribute to an improved exposure modeling by providing ENM release estimates closer to reality.
Collapse
Affiliation(s)
- Alejandro Caballero-Guzman
- EMPA, Swiss Federal Laboratories for Materials Science and Technology, Technology and Society Laboratory, Lerchenfeldstrasse 5, CH-9014 St. Gallen, Switzerland
| | - Bernd Nowack
- EMPA, Swiss Federal Laboratories for Materials Science and Technology, Technology and Society Laboratory, Lerchenfeldstrasse 5, CH-9014 St. Gallen, Switzerland.
| |
Collapse
|
25
|
Lofrano G, Carotenuto M, Libralato G, Domingos RF, Markus A, Dini L, Gautam RK, Baldantoni D, Rossi M, Sharma SK, Chattopadhyaya MC, Giugni M, Meric S. Polymer functionalized nanocomposites for metals removal from water and wastewater: An overview. WATER RESEARCH 2016; 92:22-37. [PMID: 26827255 DOI: 10.1016/j.watres.2016.01.033] [Citation(s) in RCA: 128] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/16/2015] [Revised: 01/04/2016] [Accepted: 01/15/2016] [Indexed: 06/05/2023]
Abstract
Pollution by metal and metalloid ions is one of the most widespread environmental concerns. They are non-biodegradable, and, generally, present high water solubility facilitating their environmental mobilisation interacting with abiotic and biotic components such as adsorption onto natural colloids or even accumulation by living organisms, thus, threatening human health and ecosystems. Therefore, there is a high demand for effective removal treatments of heavy metals, making the application of adsorption materials such as polymer-functionalized nanocomposites (PFNCs), increasingly attractive. PFNCs retain the inherent remarkable surface properties of nanoparticles, while the polymeric support materials provide high stability and processability. These nanoparticle-matrix materials are of great interest for metals and metalloids removal thanks to the functional groups of the polymeric matrixes that provide specific bindings to target pollutants. This review discusses PFNCs synthesis, characterization and performance in adsorption processes as well as the potential environmental risks and perspectives.
Collapse
Affiliation(s)
- Giusy Lofrano
- Department of Chemistry and Biology, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, Salerno, Italy; Department of Environmental and Civil Engineering, University of Naples "Federico II", Via Claudio 21, 80127 Naples, Italy
| | - Maurizio Carotenuto
- Department of Chemistry and Biology, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, Salerno, Italy
| | - Giovanni Libralato
- Department of Environmental Sciences, Informatics and Statistics, Cà Foscari University of Venice, Via Torino 155, 30172, Mestre-Venezia, Italy.
| | - Rute F Domingos
- Institut de Physique du Globe de Paris, Sorbonne Paris Cité, Université; Paris Diderot, UMR CNRS 7154, 75238 Paris Cedex 05, France
| | - Arjen Markus
- Deltares, PO Box 177, 2600 MH Delft, The Netherlands
| | - Luciana Dini
- Department of Biological and Environmental Science and Technology, University of Salento Prov.le Lecce-Monteroni, 73100 Lecce, Italy
| | - Ravindra Kumar Gautam
- Environmental Chemistry Research Laboratory, Department of Chemistry, University of Allahabad, Allahabad 211 002, India
| | - Daniela Baldantoni
- Department of Chemistry and Biology, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, Salerno, Italy
| | - Marco Rossi
- Dipartimento di Scienze di Base e Applicate per l'Ingegneria, Via Antonio Scarpa 14/16, 00161 Roma, Italy
| | - Sanjay K Sharma
- Green Chemistry & Sustainability Research Group, Department of Chemistry, JECRC University, Jaipur 303905, India
| | - Mahesh Chandra Chattopadhyaya
- Environmental Chemistry Research Laboratory, Department of Chemistry, University of Allahabad, Allahabad 211 002, India
| | - Maurizio Giugni
- Department of Environmental and Civil Engineering, University of Naples "Federico II", Via Claudio 21, 80127 Naples, Italy
| | - Sureyya Meric
- Corlu Engineering Faculty, Environmental Engineering Department, Namık Kemal University, Corlu 59860, Tekirdag, Turkey
| |
Collapse
|
26
|
Guseva Canu I, Bateson TF, Bouvard V, Debia M, Dion C, Savolainen K, Yu IJ. Human exposure to carbon-based fibrous nanomaterials: A review. Int J Hyg Environ Health 2016; 219:166-75. [PMID: 26752069 DOI: 10.1016/j.ijheh.2015.12.005] [Citation(s) in RCA: 40] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/09/2015] [Revised: 12/18/2015] [Accepted: 12/19/2015] [Indexed: 12/29/2022]
Abstract
In an emerging field of nanotechnologies, assessment of exposure to carbon nanotubes (CNT) and carbon nanofibers (CNF) is an integral component of occupational and environmental epidemiology, risk assessment and management, as well as regulatory actions. The current state of knowledge on exposure to carbon-based fibrous nanomaterials among workers, consumers and general population was studied in frame of the International Agency for Research on Cancer (IARC) Monographs-Volume 111 "Some Nanomaterials and Some Fibres". Completeness and reliability of available exposure data for use in epidemiology and risk assessment were assessed. Occupational exposure to CNT/CNF may be of concern at all stages of the material life-cycle from research through manufacture to use and disposal. Consumer and environmental exposures are only estimated by modeled data. The available information of the final steps of the life-cycle of these materials remains incomplete so far regarding amounts of handled materials and levels of exposure. The quality and amount of information available on the uses and applications of CNT/CNF should be improved to enable quantitative assessment of human exposure to these materials. For that, coordinated effort in producing surveys and exposure inventories based on harmonized strategy of material test, exposure measurement and reporting results is strongly encouraged.
Collapse
Affiliation(s)
- Irina Guseva Canu
- Institut de veille sanitaire, Département Santé-Travail, Saint-Maurice, France.
| | - Thomas F Bateson
- Environmental Protection Agency, Effects Identification & Characterization Group, Washington, DC, USA
| | - Veronique Bouvard
- International Agency for Research on Cancer (IARC), IARC Monographs Section, Lyon, France
| | - Maximilien Debia
- Institut de recherche en santé publique de l'Université de Montréal, Département de santé environnementale et santé au travail, Montreal, Canada
| | - Chantal Dion
- Institut de recherche en santé publique de l'Université de Montréal, Département de santé environnementale et santé au travail, Montreal, Canada; Institut de recherche Robert-Sauvé en santé et sécurité du travail, Département de santé environnementale et santé au travail, Montreal, Canada
| | - Kai Savolainen
- Finnish Institute of Occupational Health, Nanosafety Research Centre, Helsinki, Finland
| | - Il-Je Yu
- Hoseo University, Toxicological Research Center, Asan, South Korea
| |
Collapse
|
27
|
Wigger H, Hackmann S, Zimmermann T, Köser J, Thöming J, von Gleich A. Influences of use activities and waste management on environmental releases of engineered nanomaterials. THE SCIENCE OF THE TOTAL ENVIRONMENT 2015; 535:160-171. [PMID: 25728395 DOI: 10.1016/j.scitotenv.2015.02.042] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/02/2014] [Revised: 02/12/2015] [Accepted: 02/12/2015] [Indexed: 06/04/2023]
Abstract
Engineered nanomaterials (ENM) offer enhanced or new functionalities and properties that are used in various products. This also entails potential environmental risks in terms of hazard and exposure. However, hazard and exposure assessment for ENM still suffer from insufficient knowledge particularly for product-related releases and environmental fate and behavior. This study therefore analyzes the multiple impacts of the product use, the properties of the matrix material, and the related waste management system (WMS) on the predicted environmental concentration (PEC) by applying nine prospective life cycle release scenarios based on reasonable assumptions. The products studied here are clothing textiles treated with silver nanoparticles (AgNPs), since they constitute a controversial application. Surprisingly, the results show counter-intuitive increases by a factor of 2.6 in PEC values for the air compartment in minimal AgNP release scenarios. Also, air releases can shift from washing to wearing activity; their associated release points may shift accordingly, potentially altering release hot spots. Additionally, at end-of-life, the fraction of AgNP-residues contained on exported textiles can be increased by 350% when assuming short product lifespans and globalized WMS. It becomes evident that certain combinations of use activities, matrix material characteristics, and WMS can influence the regional PEC by several orders of magnitude. Thus, in the light of the findings and expected ENM market potential, future assessments should consider these aspects to derive precautionary design alternatives and to enable prospective global and regional risk assessments.
Collapse
Affiliation(s)
- Henning Wigger
- Faculty of Production Engineering, Department of Technological Design and Development, University of Bremen, Badgasteiner Str. 1, 28359 Bremen, Germany.
| | - Stephan Hackmann
- UFT Center for Environmental Research and Sustainable Technology, Department of General and Theoretical Ecology, University of Bremen, Leobener Str., 28359 Bremen, Germany
| | - Till Zimmermann
- Faculty of Production Engineering, Department of Technological Design and Development, University of Bremen, Badgasteiner Str. 1, 28359 Bremen, Germany; ARTEC - Research Center for Sustainability Studies, Enrique-Schmidt-Str. 7, 28359 Bremen, Germany
| | - Jan Köser
- UFT Center for Environmental Research and Sustainable Technology, Department of Sustainable Chemistry, University of Bremen, Leobener Str., 28359 Bremen, Germany
| | - Jorg Thöming
- UFT Center for Environmental Research and Sustainable Technology, Department of Sustainable Chemical Engineering, University of Bremen, Leobener Str., 28359 Bremen, Germany
| | - Arnim von Gleich
- Faculty of Production Engineering, Department of Technological Design and Development, University of Bremen, Badgasteiner Str. 1, 28359 Bremen, Germany; ARTEC - Research Center for Sustainability Studies, Enrique-Schmidt-Str. 7, 28359 Bremen, Germany
| |
Collapse
|
28
|
Schlagenhauf L, Kianfar B, Buerki-Thurnherr T, Kuo YY, Wichser A, Nüesch F, Wick P, Wang J. Weathering of a carbon nanotube/epoxy nanocomposite under UV light and in water bath: impact on abraded particles. NANOSCALE 2015; 7:18524-18536. [PMID: 26490158 DOI: 10.1039/c5nr05387k] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Weathering processes can influence the surface properties of composites with incorporated nanoparticles. These changes may affect the release behavior of nanoparticles when an abrasion process is applied. Therefore, the influence of two different weathering processes, immersion in water and exposure to UV light, on the properties of abraded particles from a carbon nanotube (CNT)/epoxy nanocomposite was investigated. The investigation included the measurement of the weathering impact on the surface chemistry of the exposed samples, the particle size of abraded particles, the quantity of exposed CNTs in the respirable part of the abraded particles, and the toxicity of abraded particles, measured by in vitro toxicity tests using the THP-1 monocyte-derived macrophages. The results showed that weathering by immersion in water had no influence on the properties of abraded particles. The exposure to UV light caused a degradation of the epoxy on the surface, followed by delamination of an approx. 2.5 μm thick layer. An increased quantity of exposed CNTs in abraded particles was not found; on the contrary, longer UV exposure times decreased the released fraction of CNTs from 0.6% to 0.4%. The toxicity tests revealed that abraded particles from the nanocomposites did not induce additional acute cytotoxic effects compared to particles from the neat epoxy.
Collapse
Affiliation(s)
- Lukas Schlagenhauf
- Laboratory for Functional Polymers, Empa - Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
| | | | | | | | | | | | | | | |
Collapse
|
29
|
Schlagenhauf L, Buerki-Thurnherr T, Kuo YY, Wichser A, Nüesch F, Wick P, Wang J. Carbon Nanotubes Released from an Epoxy-Based Nanocomposite: Quantification and Particle Toxicity. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2015; 49:10616-10623. [PMID: 26251010 DOI: 10.1021/acs.est.5b02750] [Citation(s) in RCA: 44] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
Studies combining both the quantification of free nanoparticle release and the toxicological investigations of the released particles from actual nanoproducts in a real-life exposure scenario are urgently needed, yet very rare. Here, a new measurement method was established to quantify the amount of free-standing and protruding multiwalled carbon nanotubes (MWCNTs) in the respirable fraction of particles abraded from a MWCNT-epoxy nanocomposite. The quantification approach involves the prelabeling of MWCNTs with lead ions, nanocomposite production, abrasion and collection of the inhalable particle fraction, and quantification of free-standing and protruding MWCNTs by measuring the concentration of released lead ions. In vitro toxicity studies for genotoxicity, reactive oxygen species formation, and cell viability were performed using A549 human alveolar epithelial cells and THP-1 monocyte-derived macrophages. The quantification experiment revealed that in the respirable fraction of the abraded particles, approximately 4000 ppm of the MWCNTs were released as exposed MWCNTs (which could contact lung cells upon inhalation) and approximately 40 ppm as free-standing MWCNTs in the worst-case scenario. The release of exposed MWCNTs was lower for nanocomposites containing agglomerated MWCNTs. The toxicity tests revealed that the abraded particles did not induce any acute cytotoxic effects.
Collapse
Affiliation(s)
- Lukas Schlagenhauf
- Institute of Environmental Engineering, ETH Zurich , Zurich, Switzerland
| | - Tina Buerki-Thurnherr
- Laboratory for Particles-Biology Interactions, Empa - Swiss Federal Laboratories for Materials Science and Technology , St. Gallen, CH-9014 Switzerland
| | - Yu-Ying Kuo
- Institute of Environmental Engineering, ETH Zurich , Zurich, Switzerland
| | | | | | - Peter Wick
- Laboratory for Particles-Biology Interactions, Empa - Swiss Federal Laboratories for Materials Science and Technology , St. Gallen, CH-9014 Switzerland
| | - Jing Wang
- Institute of Environmental Engineering, ETH Zurich , Zurich, Switzerland
| |
Collapse
|
30
|
Siddique YH, Haidari M, Khan W, Fatima A, Jyoti S, Khanam S, Naz F, Rahul, Ali F, Singh BR, Beg T, Mohibullah, Naqvi AH. Toxic potential of copper-doped ZnO nanoparticles in Drosophila melanogaster (Oregon R). Toxicol Mech Methods 2015; 25:425-32. [PMID: 26000624 DOI: 10.3109/15376516.2015.1045653] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Abstract
AIMS In the present study, copper-doped ZnO nanoparticles (doped ZnO NPs Cu) were synthesized, characterized and evaluated for their possible toxic effects in Drosophila melanogaster (Oregon R). METHODS AND RESULTS X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray spectrometry confirm the formation of doped ZnO NPs Cu. Doped ZnO NPs Cu (3%) were mixed in the diet at final concentrations of 1, 2, 4 and 8 µg/µl. The starved male flies were allowed to feed on it for 4 days. After completion of the desired duration, climbing ability, activity pattern, activity of acetylcholinesterase (AChE), glutathione (GSH), glutathione-S-transferase (GST), lipid peroxidation (LPO), total protein content and caspases were studied. SDS-PAGE was also performed for whole fly homogenate of control as well as treated flies. No loss in the climbing and activity pattern was observed at the selected doses of doped ZnO NPs Cu. No significant change in the levels of AChE, GSH, GST, LPO, caspase 9/3 and total protein content was observed. The brain sections showed no gross changes in the structure and SDS-PAGE patterns also revealed no change in the protein expression. CONCLUSIONS The results suggest that doped ZnO NPs Cu are non-toxic at 1, 2, 4 and 8 µg/µl of concentration in D. melanogaster.
Collapse
Affiliation(s)
- Yasir Hasan Siddique
- a Drosophila Transgenic Laboratory, Section of Genetics, Department of Zoology, Faculty of Life Sciences , Aligarh Muslim University , Aligarh , Uttar Pradesh , India
| | - Moazzam Haidari
- b Department of Electrical Engineering, Z.H. College of Engineering & Technology , Aligarh Muslim University , Aligarh , Uttar Pradesh , India
| | - Wasi Khan
- c Centre of Excellence in Materials Sciences (Nano materials), Department of Applied Physics , Z.H. College of Engineering & Technology, Aligarh Muslim University , Aligarh , Uttar Pradesh , India , and
| | - Ambreen Fatima
- a Drosophila Transgenic Laboratory, Section of Genetics, Department of Zoology, Faculty of Life Sciences , Aligarh Muslim University , Aligarh , Uttar Pradesh , India
| | - Smita Jyoti
- a Drosophila Transgenic Laboratory, Section of Genetics, Department of Zoology, Faculty of Life Sciences , Aligarh Muslim University , Aligarh , Uttar Pradesh , India
| | - Saba Khanam
- a Drosophila Transgenic Laboratory, Section of Genetics, Department of Zoology, Faculty of Life Sciences , Aligarh Muslim University , Aligarh , Uttar Pradesh , India
| | - Falaq Naz
- a Drosophila Transgenic Laboratory, Section of Genetics, Department of Zoology, Faculty of Life Sciences , Aligarh Muslim University , Aligarh , Uttar Pradesh , India
| | - Rahul
- a Drosophila Transgenic Laboratory, Section of Genetics, Department of Zoology, Faculty of Life Sciences , Aligarh Muslim University , Aligarh , Uttar Pradesh , India
| | - Fahad Ali
- a Drosophila Transgenic Laboratory, Section of Genetics, Department of Zoology, Faculty of Life Sciences , Aligarh Muslim University , Aligarh , Uttar Pradesh , India
| | - Braj Raj Singh
- b Department of Electrical Engineering, Z.H. College of Engineering & Technology , Aligarh Muslim University , Aligarh , Uttar Pradesh , India
| | - Tanveer Beg
- d Biology Department, Faculty of Science , Jazan University , Jazan , Saudi Arabia
| | - Mohibullah
- b Department of Electrical Engineering, Z.H. College of Engineering & Technology , Aligarh Muslim University , Aligarh , Uttar Pradesh , India
| | - Alim Hussain Naqvi
- c Centre of Excellence in Materials Sciences (Nano materials), Department of Applied Physics , Z.H. College of Engineering & Technology, Aligarh Muslim University , Aligarh , Uttar Pradesh , India , and
| |
Collapse
|
31
|
Goodwin DG, Marsh KM, Sosa IB, Payne JB, Gorham JM, Bouwer EJ, Fairbrother DH. Interactions of microorganisms with polymer nanocomposite surfaces containing oxidized carbon nanotubes. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2015; 49:5484-5492. [PMID: 25811739 DOI: 10.1021/acs.est.5b00084] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
In many environmental scenarios, the fate and impact of polymer nanocomposites (PNCs) that contain carbon nanotubes (CNT/PNCs) will be influenced by their interactions with microorganisms, with implications for antimicrobial properties and the long-term persistence of PNCs. Using oxidized single-wall (O-SWCNTs) and multi-wall CNTs (O-MWCNTs), we explored the influence that CNT loading (mass fraction≤0.1%-10%) and type have on the initial interactions of Pseudomonas aeruginosa with O-CNT/poly(vinyl alcohol) (PVOH) nanocomposites containing well-dispersed O-CNTs. LIVE/DEAD staining revealed that, despite oxidation, the inclusion of O-SWCNTs or O-MWCNTs caused PNC surfaces to exhibit antimicrobial properties. The fraction of living cells deposited on both O-SWCNT and O-MWCNT/PNC surfaces decreased exponentially with increasing CNT loading, with O-SWCNTs being approximately three times more cytotoxic on a % w/w basis. Although not every contact event between attached microorganisms and CNTs led to cell death, the cytotoxicity of the CNT/PNC surfaces scaled with the total contact area that existed between the microorganisms and CNTs. However, because the antimicrobial properties of CNT/PNC surfaces require direct CNT-microbe contact, dead cells were able to shield living cells from the cytotoxic effects of CNTs, allowing biofilm formation to occur on CNT/PNCs exposed to Pseudomonas aeruginosa for longer time periods.
Collapse
Affiliation(s)
- David G Goodwin
- †Department of Chemistry, Johns Hopkins University, Baltimore, Maryland 21218, United States
| | - K M Marsh
- †Department of Chemistry, Johns Hopkins University, Baltimore, Maryland 21218, United States
| | - I B Sosa
- ‡Centro de Química, Instituto Venezolano de Investigaciones Cientificas (IVIC), Altos de Pipe, Caracas 1020-A, Miranda, Venezuela
| | - J B Payne
- §Department of Geography and Environmental Engineering, Johns Hopkins University, Baltimore, Maryland 21218, United States
| | - J M Gorham
- ∥Materials Measurement Science Division, NIST, Gaithersburg, Maryland 20899, United States
| | - E J Bouwer
- §Department of Geography and Environmental Engineering, Johns Hopkins University, Baltimore, Maryland 21218, United States
| | - D H Fairbrother
- †Department of Chemistry, Johns Hopkins University, Baltimore, Maryland 21218, United States
| |
Collapse
|
32
|
Arts JHE, Hadi M, Irfan MA, Keene AM, Kreiling R, Lyon D, Maier M, Michel K, Petry T, Sauer UG, Warheit D, Wiench K, Wohlleben W, Landsiedel R. A decision-making framework for the grouping and testing of nanomaterials (DF4nanoGrouping). Regul Toxicol Pharmacol 2015; 71:S1-27. [PMID: 25818068 DOI: 10.1016/j.yrtph.2015.03.007] [Citation(s) in RCA: 190] [Impact Index Per Article: 21.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/11/2015] [Revised: 03/13/2015] [Accepted: 03/14/2015] [Indexed: 12/22/2022]
Abstract
The European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) 'Nano Task Force' proposes a Decision-making framework for the grouping and testing of nanomaterials (DF4nanoGrouping) that consists of 3 tiers to assign nanomaterials to 4 main groups, to perform sub-grouping within the main groups and to determine and refine specific information needs. The DF4nanoGrouping covers all relevant aspects of a nanomaterial's life cycle and biological pathways, i.e. intrinsic material and system-dependent properties, biopersistence, uptake and biodistribution, cellular and apical toxic effects. Use (including manufacture), release and route of exposure are applied as 'qualifiers' within the DF4nanoGrouping to determine if, e.g. nanomaterials cannot be released from a product matrix, which may justify the waiving of testing. The four main groups encompass (1) soluble nanomaterials, (2) biopersistent high aspect ratio nanomaterials, (3) passive nanomaterials, and (4) active nanomaterials. The DF4nanoGrouping aims to group nanomaterials by their specific mode-of-action that results in an apical toxic effect. This is eventually directed by a nanomaterial's intrinsic properties. However, since the exact correlation of intrinsic material properties and apical toxic effect is not yet established, the DF4nanoGrouping uses the 'functionality' of nanomaterials for grouping rather than relying on intrinsic material properties alone. Such functionalities include system-dependent material properties (such as dissolution rate in biologically relevant media), bio-physical interactions, in vitro effects and release and exposure. The DF4nanoGrouping is a hazard and risk assessment tool that applies modern toxicology and contributes to the sustainable development of nanotechnological products. It ensures that no studies are performed that do not provide crucial data and therefore saves animals and resources.
Collapse
Affiliation(s)
- Josje H E Arts
- AkzoNobel, Technology and Engineering, Arnhem, Netherlands
| | - Mackenzie Hadi
- Shell Health, Shell International B.V., The Hague, Netherlands
| | | | | | | | - Delina Lyon
- Shell Health, Shell Oil Company, Houston, TX, USA
| | | | | | | | - Ursula G Sauer
- Scientific Consultancy - Animal Welfare, Neubiberg, Germany
| | - David Warheit
- DuPont Haskell Global Centers for HES, Newark, DE, USA
| | | | | | | |
Collapse
|
33
|
Duncan TV. Release of engineered nanomaterials from polymer nanocomposites: the effect of matrix degradation. ACS APPLIED MATERIALS & INTERFACES 2015; 7:20-39. [PMID: 25397693 DOI: 10.1021/am5062757] [Citation(s) in RCA: 34] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
Polymer nanocomposites-polymer-based materials that incorporate filler elements possessing at least one dimension in the nanometer range-are increasingly being developed for commercial applications ranging from building infrastructure to food packaging to biomedical devices and implants. Despite a wide range of intended applications, it is also important to understand the potential for exposure to these nanofillers, which could be released during routine use or abuse of these materials so that it can be determined whether they pose a risk to human health or the environment. This article is the second of a pair that review what is known about the release of engineered nanomaterials (ENMs) from polymer nanocomposites. Two roughly separate ENM release paradigms are considered in this series: the release of ENMs via passive diffusion, desorption, and dissolution into external liquid media and the release of ENMs assisted by matrix degradation. The present article is focused primarily on the second paradigm and includes a thorough, critical review of the associated body of peer-reviewed literature on ENM release by matrix degradation mechanisms, including photodegradation, thermal decomposition, mechanical wear, and hydrolysis. These release mechanisms may be especially relevant to nanocomposites that are likely to be subjected to weathering, including construction and infrastructural materials, sporting equipment, and materials that might potentially end up in landfills. This review pays particular attention to studies that shed light on specific release mechanisms and synergistic mechanistic relationships. The review concludes with a short section on knowledge gaps and future research needs.
Collapse
Affiliation(s)
- Timothy V Duncan
- Center for Food Safety and Applied Nutrition, United States Food and Drug Administration , 6502 South Archer Road, Bedford Park, Illinois 60501, United States
| |
Collapse
|
34
|
Nanomaterials Release from Nano-Enabled Products. THE HANDBOOK OF ENVIRONMENTAL CHEMISTRY 2015. [DOI: 10.1007/698_2015_409] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/04/2022]
|
35
|
|
36
|
Uysal Unalan I, Cerri G, Marcuzzo E, Cozzolino CA, Farris S. Nanocomposite films and coatings using inorganic nanobuilding blocks (NBB): current applications and future opportunities in the food packaging sector. RSC Adv 2014. [DOI: 10.1039/c4ra01778a] [Citation(s) in RCA: 78] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/14/2023] Open
|