A Bacillus sp. isolated from sediments of the Sarno River mouth, Gulf of Naples (Italy) produces a biofilm biosorbing Pb(II)

Molecular and eco-physiological responses of soil-borne lead (Pb2+)-resistant bacteria for bioremediation and plant growth promotion under lead stress

Lead (Pb) is the 2nd known portentous hazardous substance after arsenic (As). Being highly noxious, widespread, non-biodegradable, prolonged environmental presence, and increasing accumulation, particularly in arable land, Pb pollution has become a serious global health concern requiring urgent remediation. Soil-borne, indigenous microbes from Pb-polluted sites have evolved diverse resistance strategies, involving biosorption, bioprecipitation, biomineralization, biotransformation, and efflux mechanisms, under continuous exposure to Pb in human-impacted surroundings. These strategies employ a wide range of functional bioligands to capture Pb and render it inaccessible for leaching. Recent breakthroughs in molecular technology and understanding of lead resistance mechanisms offer the potential for utilizing microbes as biological tools in environmental risk assessment. Leveraging the specific affinity and sensitivity of bacterial regulators to Pb2+ ions, numerous lead biosensors have been designed and deployed worldwide to monitor Pb bioavailability in contaminated sites, even at trace levels. Besides, the ongoing degradation of croplands due to Pb pollution poses a significant challenge to meet the escalating global food demands. The accumulation of Pb in plant tissues jeopardizes both food safety and security while severely impacting plant growth. Exploring Pb-resistant plant growth-promoting rhizobacteria (PGPR) presents a promising sustainable approach to agricultural practices. The active associations of PGPR with host plants have shown enhancements in plant biomass and stress alleviation under Pb influence. They thus serve a dual purpose for plants grown in Pb-contaminated areas. This review aims to offer a comprehensive understanding of the role played by Pb-resistant soil-borne indigenous bacteria in expediting bioremediation and improving the growth of Pb-challenged plants essential for potential field application, thus broadening prospects for future research and development.

Production of biosurfactant by salt-resistant Bacillus in lead-supplemented media: application and toxicity

A group of biosurfactants are lipopeptides that are produced by some microorganisms, especially Bacillus strains. They are new bioactive agents with anticancer, antibacterial, antifungal, and antiviral activities. Also, they are used in sanitation industries. In this study, a lead-resistant strain of Bacillus halotolerans was isolated for lipopeptide production. This isolate exhibited metal resistance (lead, calcium, chromium, nickel, copper, manganese, and mercury), salt tolerance (12%), and antimicrobial activities against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Saccharomyces cerevisiae. The production of lipopeptide was optimized, concentrated, and then extracted from the polyacrylamide gel in a simple way for the first time. The nature of the purified lipopeptide was determined by FTIR, GC/MS, and HPLC analyses. The purified lipopeptide indicated significant antioxidant properties (90.38% at a concentration of 0.8 mg ml-1). Also, it had anticancer activity by apoptosis (flow cytometry analysis) in MCF-7 cells, while it had no cytotoxicity on HEK-293 normal cells. Therefore, Bacillus halotolerans lipopeptide has the potential to be used as an antioxidant, antimicrobial, or anticancer agent in the medical and food industries.

A mini-review on indigenous microbial biofilm from various wastewater for heavy-metal removal - new trends

Biofilm, as a form of the microbial community in nature, represents an evolutionary adaptation to the influence of various environmental conditions. In nature, the largest number of microorganisms occur in the form of multispecies biofilms. The ability of microorganisms to form a biofilm is one of the reasons for antibiotic resistance. The creation of biofilms resistant to various contaminants, on the other hand, improves the biological treatment process in wastewater treatment plants. Heavy metals cannot be degraded, but they can be transformed into non-reactive and less toxic forms. In this process, microorganisms are irreplaceable as they interact with the metals in a variety of ways. The environment polluted by heavy metals, such as wastewater, is also a source of undiscovered microbial diversity and specific microbial strains. Numerous studies show that biofilm is an irreplaceable strategy for heavy metal removal. In this review, we systematize recent findings regarding the bioremediation potential of biofilm-forming microbial species isolated from diverse wastewaters for heavy metal removal. In addition, we include some mechanisms of action, application possibilities, practical issues, and future prospects.

Uptake of lead by bacteria isolated from industrial effluents and their potential use in bioremediation of wastewater

Due to rising populations and human activities, heavy metals (HM) toxicity has become a serious problem for all life forms. The present study deals with isolating and identifying lead-resistant bacteria from contaminated wastewater of tanneries effluents. Two isolated strains were identified as Bacillus cereus (ID1), and Bacillus sp. (ID3), and both strains resisted a 25 mM concentration of Lead nitrate (Pb (NO3)2). After four days of treatment, Bacillus cereus (ID1) showed 80% lead uptake, and Bacillus sp. (ID3) showed 88%. Lead uptake was confirmed by Energy dispersive X-Ray (EDX) analysis. Fourier transform infrared spectroscopy (FTIR) showed that structural alterations had occurred in functional groups of the treated samples compared to the controls. Our research indicates that these Bacillus strains may be useful in bioremediating heavy metals from polluted environments. Further investigation into the processes involved in the uptake and homeostasis of heavy metals by these strains is required, as is the identification of the genes and enzymes responsible for Pb-bioremediation.

Potential application of novel cadmium-tolerant bacteria in bioremediation of Cd-contaminated soil

With the increase in cadmium (Cd) release into the environment, it is necessary to find appropriate solutions to reduce soil Cd pollution. Microorganisms are a green and effective means for the remediation of Cd-contaminated soil. In this study, in a Cd-contaminated farmland, we screened and identified novel Cd-resistant strains, Paenarthrobactor nitroguajacolicus, Lysinibacillus fusiformis, Bacillus licheniformis, and Methyllobacium brachiatum, with minimum inhibitory concentrations of 100, 100, 50, and 50 mg/L, respectively, and added them each to pots containing Cd-contaminated rape plants to explore their remediation ability. The results showed that treatment with each of the four strains significantly increased the abundance of Nitrospirae, Firmicutes, Verrucomicrobia, and Patescibacterium in the rhizosphere soil of the plants. This led to changes in soil physical and chemical indices; pH; and available phosphorus, urease, and catalase activities, which were significantly negatively correlated with bioavailable Cd, reducing 28.74-58.82 % Cd enrichment to plants and 23.72-43.79 % Cd transport within plants, and reducing 5.52-10.68 % available cadmium in soil, effectively reducing the biotoxicity of Cd. Thus, this study suggests microbial remediation as a reliable option, forming a basis for the remediation of Cd-contaminated soil.

Applying fulvic acid for sediment metals remediation: Mechanism, factors, and prospect

Fulvic acid (FA) has been shown to play a decisive role in controlling the environmental geochemical behavior of metals. As a green and natural microbial metabolite, FA is widely used in environmental remediation because of its good adsorption complexation and redox ability. This paper introduces the reaction mechanism and properties of FA with metals, and reviews the progress of research on the remediation of metal pollutant by FA through physicochemical remediation and bioremediation. FA can control the biotoxicity and migration ability of some metals, such as Pb, Cr, Hg, Cd, and As, through adsorption complexation and redox reactions. The concentration, molecular weight, and source are the main factors that determine the remediation ability of FA. In addition, the ambient pH, temperature, metal ion concentrations, and competing components in sediment environments have significant effects on the extent and rate of a reaction between metals and FA during the remediation process. Finally, we summarize the challenges that this promising environmental remediation tool may face. The research directions of FA in the field of metals ecological remediation are also prospected. This review can provide new ideas and directions for the research of remediation of metals contaminants in sediments.

Isotherm and kinetics modeling of biosorption and bioreduction of the Cr(VI) by Brachybacterium paraconglomeratum ER41

Chromium is one of the most widely used metals in industry. Hexavalent form [Cr(VI)], which is found in industrial discharges, is very toxic and very soluble in water. From soil taken from an abandoned lead and iron mine, a bacterial strain capable of reducing Cr(VI) was isolated and identified as Brachybacterium paraconglomeratum ER41. Objective of this work was to evaluate the power of this bacterium to reduce Cr(VI). Results obtained showed that this bacterium is capable of eliminating 100 mg/L of Cr(VI) after 48 h (pH 8 and temperature 30 °C). For modeling biosorption kinetics, pseudo-first-order and intraparticle diffusion models gave a better fit. Furthermore, the adsorption mechanism conformed well to Langmuir's isothermal model indicating monolayer type sorption. Biomass analysis of this bacterium before and after contact with chromium by scanning electron microscopy-energy-dispersive X-ray and by Fourier transform infrared spectroscopy showed that the surface ligands of bacterial wall are probably responsible for biosorption and bioreduction process. These results suggest a potential application of B. paraconglomeratum ER41 in bioremediation of polluted discharges.

Integrating Broussonetia papyrifera and Two Bacillus Species to Repair Soil Antimony Pollutions

Heavy metal resistant bacteria play an important role in the metal biogeochemical cycle in soil, but the benefits of microbial oxidation for plants and soil have not been well-documented. The purpose of this study was to explore the contribution of two Bacillus spp. to alleviate the antimony (Sb) toxicity in plants, and, then, to propose a bioremediation method for Sb contaminated soil, which is characterized by environmental protection, high efficiency, and low cost. This study explored the effects of Bacillus cereus HM5 and Bacillus thuringiensis HM7 inoculation on Broussonetia papyrifera and soil were evaluated under controlled Sb stressed conditions (0 and 100 mmol/L, antimony slag) through a pot experiment. The results show that the total root length, root volume, tips, forks, crossings, and root activities of B. papyrifera with inoculation are higher than those of the control group, and the strains promote the plant absorption of Sb from the soil environment. Especially in the antimony slag treatment group, B. cereus HM5 had the most significant effect on root promotion and promoting the absorption of Sb by B. papyrifera. Compared with the control group, the total root length, root volume, tips, forks, crossings, and root activities increased by 64.54, 70.06, 70.04, 78.15, 97.73, and 12.95%, respectively. The absorption of Sb by root, stem, and leaf increased by 265.12, 250.00, and 211.54%, compared with the control group, respectively. Besides, both B. cereus HM5 and B. thuringiensis HM7 reduce the content of malondialdehyde, proline, and soluble sugars in plant leaves, keeping the antioxidant enzyme activity of B. papyrifera at a low level, and alleviating lipid peroxidation. Principal component analysis (PCA) shows that both B. cereus HM5 and B. thuringiensis HM7 are beneficial to the maintenance of plant root functions and the improvement of the soil environment, thereby alleviating the toxicity of Sb. Therefore, B. cereus HM5 and B. thuringiensis HM7 in phytoremediation with B. papyrifera is a promising inoculant used for bacteria-assisted phytoremediation on Sb contaminated sites.

Expression regulation of chitin-binding protein and metal-binding peptide in new Bacillus velezensis: MALDI-TOF MS/MS analysis

Metallothionein and metal-binding peptides are small cysteine-rich proteins produced by different organisms in stress conditions. In this study, the metal-binding peptide was detected in extracellular proteins of a new Bacillus velezensis strain, isolated from metal contaminated soil, and grown on the lead-enriched medium, for the first time. The presence of sulfide peptide was assayed by two simple tests (lead sulfide and Ellman's reagent test) for preliminary, and subsequently confirmed using polyacrylamide gel electrophoresis at media with different lead concentrations that the low-molecular-weight protein fragments (≈10 kDa) were observed while none were detected in the medium containing sodium chloride or calcium salt. The amino acids of the observed fragments were analyzed by matrix-assisted laser desorption ionization time-of-flight tandem mass spectrometry (MALDI-TOF MS/MS). Also, the metal adsorption was confirmed using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) by staining with chromium solution. The results showed that the putative sulfide peptide is metallothionein, which is induced in stress conditions. It was interesting that in all SDS profiles, one protein fragment (≈18 kDa) was inhibited in lead-enriched media. The data from MALDI-TOF MS/MS analysis showed that this fraction was a chitin-binding protein whose production was regulated by metal contamination. It is anticipated that these two proteins regulate the toxicity of lead.

Lead metal biosorption and isotherms studies by metal-resistant Bacillus strain MRS-2 bacterium

In this study, lead (Pb) biosorption studies in aqueous solution were performed with metal-resistant Bacillus strain MRS-2 (ATCC 55674) bacterium which was previously isolated from wastewater plant. It showed minimum inhibition concentration of 300 ppm Pb on the nutrient agar plates. Pb biosorption using MRS-2 bacteria was investigated under different parameters such as pH, temperature, biomass dosage, initial Pb concentration, contact time, and type of biomass by batch experiments. Pb concentration was analyzed through Inductively coupled plasma-optical emission spectrometry. The rate of biosorption (Q) and Pb biosorption capacity (q_e ) were calculated for above mentioned parameters. It was observed that Pb precipitates by itself from the solution at pH 2 and 8 or above without bacteria and precipitation did not increase even in the presence of bacteria. The results showed that the highest biosorption rate and biosorption capacity (mg/g) were observed at pH 7, 25°C, 2-h contact time with live bacteria. The highest biosorption rate was observed at 1.5 g/L biomass dose and 5 ppm initial Pb concentration, whereas the highest Pb biosorption capacity was observed at 0.25 g/L biomass dose and 12.5 ppm initial Pb concentration. It was observed that Pb biosorption by live bacteria occurred through adsorption on cell surface. In this study, the biosorption isotherm analysis favored the Langmuir isotherm model indicating monolayer biosorption. This Bacillus strain showed higher Pb biosorption capacity than most of the previously reported Bacillus strains. In conclusion, this study indicates that the Bacillus MRS-2 strain can be used to remove Pb from industrial wastewaters in an ecofriendly approach.

Lead bioaccumulation mediated by Bacillus cereus BPS-9 from an industrial waste contaminated site encoding heavy metal resistant genes and their transporters

This study explores the soil microorganisms for their Lead bioremediation capability. The MIC values of the six Lead resistant bacteria were evaluated, and the AAS studies of these isolates estimated their Lead accumulation percentage. The results showed that the isolate namely Bacillus cereus BPS-9 as identified based on 16S rDNA gene sequences was shown to have the highest Lead accumulation potential (79.26 %) and also selected for bioaccumulation studies. Despite the reduction in growth rate, the superoxide dismutase activity of B. cereus BPS-9 was increased with a rise in the concentration of Lead manifested through increased nitro-blue tetrazolium (NBT) reduction from 3.94 % to 77.48 %. Moreover, the biosorption capacity of B. cereus BPS-9 was 193.93 mg/g and the Langmuir isotherm model showed a value of R² = 0.9. Furthermore, the FTIR analysis also established the role of C-H, C=C, N=N, N-H, and C-O functional groups in Lead adsorption and the SEM micrographs showed that the cells of B. cereus BPS-9 became dense, adhered and distorted after Lead adsorption. Finally, the In-silico results obtained by functional analysis through SEED viewer of the whole genome of B. cereus deciphered the presence of genes encoding heavy metal resistant proteins and transporters for the efflux of heavy metals.

Potentiality of living Bacillus pumilus SWU7-1 in biosorption of strontium radionuclide

Bacillus pumilus SWU7-1 was isolated from strontium ion (Sr(II))-uncontaminated soil, its biosorption potential was evaluated, and the effect of γ-ray radiation treatment on its biosorption was discussed. Domesticated under Sr(II) stress promoted the biosorption ability of B. pumilus to Sr(II), and the biosorption efficiency increased from 46.09% to 94.69%. At a lower initial concentration, the living bacteria had the ability to resist the biosorption of Sr(II). The optimal initial concentration range was 54-130 mg/L. The biosorption profile was better matched by Langmuir than Freundlich model, showing that the biosorption process of Sr(II) by the experimental strain was closer to the surface adsorption. According to Langmuir model, the maximum biosorption capacity of B. pumilus on Sr (II) was 299.4 mg/g. During the bacterial growth in the biosorption process, the changes in biosorption capacity and efficiency can be divided into two phases, and a pseudo-second-order model is followed in each phase. There was no significant difference in the biosorption efficiency of bacteria with different culture time after γ-ray radiation, and all of them were above 90%, which showed that B. pumilus had significant radiation resistance under experimental conditions. This study emphasized the potential application of B. pumilus in the treatment of radioactive Sr(II) pollution by biosorption.

Exploring bacterial community composition in Mediterranean deep-sea sediments and their role in heavy metal accumulation

The role of microbial processes in bioaccumulation of major and trace elements has been broadly demonstrated. However, microbial communities from marine sediments have been poorly investigated to this regard. In marine environments, particularly under high anthropogenic pressure, heavy metal accumulation increases constantly, which may lead to significant environmental issues. A better knowledge of bacterial diversity and its capability to bioaccumulate metals is essential to face environmental quality assessment. The oligotrophic westernmost Mediterranean, which is highly sensitive to environmental changes and subjected to increasing anthropogenic pressure, was selected for this study. A sediment core spanning the last two millennia was sampled at two intervals, with ages corresponding to 140 (S1) and 1400 (S2) yr BP. High-throughput sequencing showed an abundance of Bacillus, Micrococcus, unclassified members of Planococcaceae, Anaerolineaceae, Planctomycetaceae, Microlunatus, and Microbacterium in both intervals, with slight differences in their abundance, along with newly detected ones in S2, i.e., Propionibacterium, Fictibacillus, Thalassobacillus, and Bacteroides. Canonical correspondence analysis (CCA) and co-occurrence patterns confirmed strong correlations among the taxa and the environmental parameters, suggesting either shared and preferred environmental conditions, or the performance of functions similar to or complementary to each other. These results were further confirmed using culture-dependent methods. The diversity of the culturable bacterial community revealed a predominance of Bacillus, and Micrococcus or Kocuria. The interaction of these bacterial communities with selected heavy metals (Cu, Cr, Zn and Pb) was also investigated, and their capacity of bioaccumulating metals within the cells and/or in the extracellular polymeric substances (EPS) is demonstrated. Interestingly, biomineralization of Pb resulted in the precipitation of Pb phosphates (pyromorphite). Our study supports that remnants of marine bacterial communities can survive in deep-sea sediments over thousands of years. This is extremely important in terms of bioremediation, in particular when considering possible environmentally friendly strategies to bioremediate inorganic contaminants.

A comprehensive understanding of enhanced Pb mobilization in sediments caused by algal blooms

A good understanding of lead (Pb) mobilization in eutrophic lakes is a key to the accurate assessment of Pb pollution. In this work, dissolved and labile Pb was determined by both high resolution dialysis (HR-Peeper) and diffusive gradients in thin films (DGT) in sediment-water profiles of the hyper-eutrophic Meiliang Bay of Lake Taihu on a monthly basis during one year. The drinking water standards for dissolved Pb of the World Health Organization (10μg/L) and those of China were exceeded in the overlying water (20.79-118.5μg/L). Out of which, a total of five months even exceeded the fisheries water quality limitation (50μg/L) in China. The algal blooms created an anaerobic environment in the surface sediments in July. The reductive conditions led to the dissolution of Fe/Mn and this caused the release of Pb, followed by organic matter complexation. This was supported by the coincident changes of dissolved Pb with dissolved organic matter (DOM) in sediments under anaerobic incubation. Algae residue decomposition in October caused another distinct release of Pb, but this process should be considerably suppressed by increased sulfide precipitation and pyrite adsorption of Pb ion. These results indicated that Pb mobilization in sediments can be significantly enhanced by algal blooms in eutrophic lakes, indicating that further attention should be paid to Pb pollution in waters with harmful algal blooms.

Active and passive biosorption of Pb(II)using live and dead biomass of marine bacterium Bacillus xiamenensis PbRPSD202: Kinetics and isotherm studies

A highly lead(II) resistant (up to 2200 mg/l) bacterium PbRPSD202 was selected among 210 lead resistant bacteria isolated from marine environment of Paradeep Port, Odisha for possible biosoption of toxic Pb (II) ions from metals polluted environments. The bacterium was identified as Bacillus xiamenensis following the phenotypic as well as 16S rRNA gene sequence analysis. In addition to Pb(II), it also showed resistance towards other heavy metals like Cd(II), Cr(VI), As(III), Cu(II), Ni(II) and Zn(II). Batch biosorption of Pb(II) using both live and dead biomass of this strain was investigated under different operational parametric conditions such as pH, temperature, NaCl concentration, shaking speed, treatment time, biomass concentration and initial Pb(II) concentration. The maximum Pb(II) uptake of 216.75 and 207.4 mg/g biomass was obtained with live and dead biomass, respectively, at the optimum condition (4% w/v NaCl, pH 6.0, 35 °C, 140 rpm and 1 g/l biosorbent dose). Both active as well as passive Pb(II) bio-sorption process showed best fit with the pseudo-second-order kinetic model. The sorption mechanism was favoured with Langmuir isotherm model indicating monolayer type adsorption. FTIR and FESEM-EDX analysis further ensured the possible interactions of Pb(II) with bacterial cell surface ligands like hydroxyl, carbonyl, carboxyl and amine groups during surface adsorption. TEM analysis revealed the intracellular accumulation of lead ions. This investigation highlights the potential application of this bacterium for bioremediation of lead(II) from the multiple metals contaminated saline environment through biosorption.

Assessment of By-Product from Botryosphaeria rhodina MAMB-05 as an Effective Biosorbent of Pb(II)

In this work, two types of biomass preparations (VMSM and M3) from the filamentous fungus Botryosphaeria rhodina MAMB-05, which were previously used in a process of production of β-glucan, were assessed as biosorbents of lead. The operating conditions, optimized through response surface methodology and experimental design, were shown to be pH 5.29 and a biosorbent dose of 0.23 g/L for the VMSM biomass type; and pH 5.06 and a dose of biosorbent of 0.60 g/L for the M3 biomass type, at a constant temperature of 27 °C. Fourier transform-infrared spectroscopy analyzed the presence of functional groups on the biomass surface. In addition to give an extra value to the by-product biomass, the VMSM-type from B. rhodina MAMB-05 showed an excellent lead biosorption capacity (q_m) with a value of 403.4 mg/g for the Langmuir model, comparing favorably with literature results, while the M3 subtype biomass showed a value of 96.05 mg/g.

Efficacy of dredging engineering as a means to remove heavy metals from lake sediments

Dredging is used worldwide to remove polluted sediments from water bodies. However, the dredging efficacy remains hard to identify. Here, we studied the efficacy of dredging engineering as a means to remove Cu, Cd, and Pb from polluted lake sediments, after six years of completion. Dissolved metals and DGT-labile metals were quantified in the non-dredged and post-dredged sediments by high-resolution dialysis (HR-Peeper) and diffusive gradients (DGT) in thin films techniques. April and July measurements showed that dredging was effectively remediate the polluted sediments. The dissolved Pb, Cd, and Cu contents decreased up to 30%, 44%, and 26%, and the DGT-labile contents decreased up to 51%, 27%, and 33% compared with the contents in the non-dredged zone. Dredging was thus proven efficient in decreasing the labile metal fractions, increasing the capacity of available solids to bind metals, and slowing the leaching of metals from available solids in the post-dredged sediments. In October and January, the dredging efficacy was counteracted by the decomposition of algae, which increased the dissolved and DGT-labile metal concentrations in the post-dredged zone.

Seasonal changes of lead mobility in sediments in algae- and macrophyte-dominated zones of the lake

This study examined lead (Pb) pollution in algae- and macrophytes-dominated sediments, using diffusive gradient in thin films (DGT) and dialysis (HR-Peeper) techniques. Lead pollution varied by season in the two different ecotype sediments. In the algae-dominated zone, the highest concentrations of DGT-labile Pb and dissolved Pb occurred in April and July, respectively. The reductive dissolution of Fe/Mn oxides was identified as an important driver for Pb releases in April and July. This was supported by the decrease of the reducible fraction of Pb in sediments during those sampling periods. Furthermore, dissolved organic matter (DOM) complexation with Pb in sediments also significantly increased the dissolved Pb concentrations in July. The Pb-DOM complexes accounted for 95% of the total chemical species of Pb in pore water, calculated by Visual MINTEQ 3.1 model. Low concentrations of labile and dissolved Pb were observed in October and January; these resulted from the formation of Pb-sulfide precipitates and adsorption by Fe/Mn oxides. It was supported by the high rate of Pb(HS)₂ precipitation (saturation index > 0), at 36%, in October samples and the high reducible fraction of Pb in sediments in January samples. In the macrophytes-dominated region, there was a decrease of labile and dissolved Pb concentrations in April and July. It is likely because of the uptake of Pb by submerged macrophyte roots and the Fe/Mn plaques in the root surface. High concentrations of labile and dissolved Pb were observed in October and January, likely resulting from the DOM complexation with Pb in sediments. This was supported by the fact that the Pb-DOM complexes accounted for 90% and 87% of the total chemical species of Pb in October and January, respectively.

Biomonitoring of nutrient and toxic element concentrations in the Sarno River through aquatic plants

The Sarno River is considered the most polluted river in Europe and one of the ten most polluted rivers in the world. So far, its quality has been usually evaluated by water and sediment analyses of either inorganic or organic pollutants. However, a biomonitoring approach would be of paramount importance in the evaluation of river quality, since it integrates pollutant temporal fluctuations, as in the case of discontinuous inputs from urban, industrial and agricultural activities. To this end, a passive biomonitoring study of the Sarno River was carried out, using two native aquatic plants accumulators of inorganic pollutants. The spring area was monitored analysing the roots of the semi-submerged Apium nodiflorum, whereas the whole river course was monitored analysing the shoots of the submerged Potamogeton pectinatus. The information on the four macronutrient (Ca, K, Mg, P), the six micronutrient (Cu, Fe, Mn, Na, Ni, Zn) and the four toxic element (Cd, Cr, Pb, V) concentrations were separately combined in the Nemerow Pollution Index. Results evidenced a severe pollution degree of the Sarno River, attributable to toxic elements > micronutrients > macronutrients. In particular, the spring area showed high K concentrations, as well as high concentrations of several micronutrients and toxic elements. A generalized Zn contamination and a progressive macronutrient (above all Ca and P), micronutrient (above all Ni, Cu and Fe) and toxic element (above all Cr and Pb) accumulation toward the mouth was related to pollution from agricultural and urban activities. Industrial sources, especially tanneries along the Solofrana tributary, accounted for high Mn concentrations, whereas the volcanic origin of the substrate accounted for a generalized V contamination.

Taxonomically-linked growth phenotypes during arsenic stress among arsenic resistant bacteria isolated from soils overlying the Centralia coal seam fire

Arsenic (As), a toxic element, has impacted life since early Earth. Thus, microorganisms have evolved many As resistance and tolerance mechanisms to improve their survival outcomes given As exposure. We isolated As resistant bacteria from Centralia, PA, the site of an underground coal seam fire that has been burning since 1962. From a 57.4°C soil collected from a vent above the fire, we isolated 25 unique aerobic As resistant bacterial strains spanning seven genera. We examined their diversity, resistance gene content, transformation abilities, inhibitory concentrations, and growth phenotypes. Although As concentrations were low at the time of soil collection (2.58 ppm), isolates had high minimum inhibitory concentrations (MICs) of arsenate and arsenite (>300 mM and 20 mM respectively), and most isolates were capable of arsenate reduction. We screened isolates (PCR and sequencing) using 12 published primer sets for six As resistance genes (AsRGs). Genes encoding arsenate reductase (arsC) and arsenite efflux pumps (arsB, ACR3(2)) were present, and phylogenetic incongruence between 16S rRNA genes and AsRGs provided evidence for horizontal gene transfer. A detailed investigation of differences in isolate growth phenotypes across As concentrations (lag time to exponential growth, maximum growth rate, and maximum OD590) showed a relationship with taxonomy, providing information that could help to predict an isolate's performance given As exposure in situ. Our results suggest that microbiological management and remediation of environmental As could be informed by taxonomically-linked As tolerance, potential for resistance gene transferability, and the rare biosphere.

Toxicity of diatom polyunsaturated aldehydes to marine bacterial isolates reveals their mode of action

Diatoms produce and release polyunsaturated aldehydes (PUAs) during senescence in culture and at the end of blooms in nature and these compounds play different ecological roles, as infochemicals, allelochemicals and pheromones In order to elucidate the toxic effects of PUAs, we isolated six bacterial strains from the Mediterranean Sea during a diatom bloom and tested their tolerance to PUA in terms of growth and cell membrane properties. Based upon 16S rRNA sequencing, these bacteria were assigned to the genera Pseudomonas, Sufflavibacter, Halomonas, Vibrio, Idiomarina, and Labrenzia. Growth of these strains was reduced by 50% (EC₅₀) at PUA concentrations ranging from 600 to 1700 μM of 2E,4E/Z-heptadienal (HEPTA), 400-800 μM of 2E, 4E/Z-octadienal (OCTA), and 70-400 μM of 2E, 4E/Z-decadienal (DECA). Two of these strains, Vibrio sp. and Halomonas, sp. were also investigated for membrane fatty acid composition in terms of adaptive modifications of their degree of saturation (ratio between saturated and unsaturated fatty acids) by GC-FID. A direct correlation between hydrophobicity and PUA toxicity was observed, and these bacteria were also found to react to PUAs by increasing the degree of saturation of their membranes fatty acids. Tested PUAs were 4-fold more toxic than the well-investigated n-alkanols, most probably due to their additional chemical aldehyde toxicity to disrupting proteins by the formation of Schiff's bases, and therefore, they act as very toxic and effective poison, probably accumulating in cytoplasmic membranes because of their high hydrophobicity.

A facile approach for surface alteration of Pseudomonas putida I3 by supplying K2SO4 into growth medium: Enhanced removal of Pb(II) from aqueous solution

A new sight of obtaining a high efficient biosorbent by supplying specific salts into bacterial growth medium was investigated in this study for Pb(II). Among a series of salts including Na₂SO₄, Na₂S₂O₃, KCl, and K₂SO₄, the highest Pb(II) removal efficiency was observed by psychrotrophilic Pseudomonas putida I3 grown in the presence of 30g/L K₂SO₄ (KSI3-30) with biosorption capacity of 62.89mg/g under cold condition (15°C), which was increased by 42.35% as compared to control (without any additive, RI3). This stimulation effect was ascribed to the increase of potassium and sulfur containing groups on KSI3-30 surface via metabolic dependent ways. The probable mechanism for Pb(II) adsorption was ion-exchange and chemical complexation. The thermal and kinetic data well fitted to Langmuir adsorption model and pseudo-second order and intraparticle diffusion kinetic model. Good recyclability and effectively dealing with real wastewater suggested KSI3-30 was a promising biosorbent for Pb-contaminated wastewater treatment.