UV-based technologies for marine water disinfection and the application to ballast water: Does salinity interfere with disinfection processes?

Inactivation of two oyster pathogens by photocatalysis and monitoring of changes in the microbiota of seawater: A case study on Ostreid herpes virus 1 μVar and Vibrio harveyi

The pollution of seawater by both biotic (bacteria, viruses) and abiotic contaminants (biocides, pharmaceutical residues) frequently leads to economic losses in aquaculture activities mostly mortality events caused by microbial infection. Advanced Oxidation Processes (AOPs) such as heterogeneous photocatalysis allow the removal of all organic contaminants present in water and therefore could reduce production losses in land-based farms. Oysters in land-based farms such as hatcheries and nurseries suffer from a large number of mortality events, resulting in significant losses. If photocatalysis has been widely studied for the decontamination, its application for disinfection is still overlooked, especially on seawater for viruses. We therefore studied seawater disinfection using the photocatalysis (UV365/TiO2) method in the context of Pacific oyster mortality syndrome (POMS). POMS has been defined as a polymicrobial disease involving an initial viral infection with Ostreid Herpes Virus 1, accompanied by multiple bacterial infections. We investigated the impact of treatment on Vibrio harveyi, a unique opportunistic pathogenic bacterium, and on a complex microbial community reflecting a natural POMS event. Viral inactivation was monitored using experimental infections to determine whether viral particles were still infectious after. Changes in the total bacterial community in seawater were studied by comparing UV365/TiO2 treatment with UV365-irradiated seawater and untreated seawater. In the case of OsHV-1, a 2-h photocatalytic treatment prevents POMS disease and oyster mortality. The same treatment also inactivates 80% of viable Vibrio harveyi culture (c.a. 1.5 log). Since OsHV-1 and Vibrio harveyi are effectively inactivated without long-term destabilization of the total bacterial microbiota in the seawater, photocatalysis appears to be a relevant alternative for disinfecting seawater in land-based oyster beds.

Inactivation of the waterborne marine pathogen Vibrio alginolyticus by photo-chemical processes driven by UV-A, UV-B, or UV-C LED combined with H2O2 or HSO5. WATER RESEARCH 2023;232:119686. [PMID: 36764105 DOI: 10.1016/j.watres.2023.119686]

Ultraviolet (UV) radiation is a well-implemented process for water disinfection. The development of emergent UV sources, such as light-emitting diodes (LEDs), has afforded new possibilities for advanced oxidation processes. The emission wavelength is considered to be an important factor for photo-chemical processes in terms of both biological damage and energetic efficiency, as the inactivation mechanisms and mode-of-action may differ according to the wavelength that is applied. In addition, these processes merit exploration for inactivating emerging pathogens, such as marine vibrios, that are important bacteria to control in maritime activities. The main goal of this study was to compare the disinfection efficacy of several UV-LED driven processes with different modes of action. First, the effect of UV-LEDs was assessed at different UV ranges (UV-A, UV-B, or UV-C). Second, the possible enhancement of a combination with hydrogen peroxide (H₂O₂) or peroxymonosulfate salt (HSO₅^-) was investigated under two different application strategies, i.e. simultaneous or sequential. The results obtained indicate a high sensitivity of Vibrio alginolyticus to UV radiation, especially under UV-B (k_obs = 0.24 cm²/mJ) and UV-C (k_obs = 1.47 cm²/mJ) irradiation. The highest inactivation rate constants were obtained for UV/HSO₅^- (k_obs (cm²/mJ)=0.0007 (UV-A); 0.39 (UV-B); 1.79 (UV-C)) with respect to UV/H₂O₂ (k_obs (cm²/mJ)=0.0006 (UV-A); 0.26 (UV-B); and 1.54 (UV-C)) processes, however, regrowth was avoided only with UV/H₂O₂. Additionally, the disinfection enhancement caused by a chemical addition was more evident in the order UV-A > UV-B > UV-C. By applying H₂O₂ (10 mg/L) or HSO₅^- (2.5 mg/L) in a sequential mode before the UV, negligible effects were obtained in comparison with the simultaneous application. Finally, promising electrical energy per order (EE_O) values were obtained as follows: UV/HSO₅^- (EE_O (kWh/m³)=1.68 (UV-A); 0.20 (UV-B); 0.04 (UV-C)) and UV/H₂O₂ (EE_O (kWh/m³)=2.15 (UV-A); 0.32 (UV-B); 0.04 (UV-C)), demonstrating the potential of UV-LEDs for disinfection in particular activities such as the aquaculture industry or maritime transport.

Bacterial communities in ballast tanks of cargo vessels - Shaped by salinity, treatment and the point of origin of the water but "hatch" its typical microbiome

Ballast water is a main vector of introduction of potentially harmful or pathogenic aquatic organisms. The development of genetic tools for ballast water monitoring has been underway and highlighted as a source for accurate and reliable data for decision making. We used 16S rRNA gene amplicon sequencing to analyze the microbial communities found in the ballast water of fifteen commercial ships routed through two Estonian ports. In parallel, samples from the port area were collected at the same time each ship visited. Fluorescence microscopy was utilized to assess the effectiveness of the treatment applied to ballast water. In addition, supplemental samples were collected from Hamburg Port (Germany) and a ballast tank decontamination system used at this port. The composition and diversity of bacterial communities varied greatly between obtained samples. The application of UV treatment did not demonstrate significant reduction in species richness estimates. The composition of microbial communities was significantly influenced by salinity, treatment (mainly untreated or UV treated) and the point of origin of the ballast water. Over a hundred potentially pathogenic bacterial taxa were found in relatively high abundance, including in ballast water that had received UV treatment. These shortcomings of stand-alone UV treatment of ballast water, especially when weak treatment is applied insufficiently, highlight the danger of possible harmful effects arising over time and the need for genetic tools for ballast water monitoring and management.

Investigation on Potential ESKAPE Surrogates for 222 and 254 nm Irradiation Experiments

Background

Due to the increase in multidrug-resistant pathogens, it is important to investigate further antimicrobial options. In order not to have to work directly with pathogens, the investigation of possible surrogates is an important aspect. It is examined how suitable possible surrogate candidates for ESKAPE pathogens are for UVC applications. In addition, the inactivation sensitivities to 222 and 254 nm radiation are compared in relation.

Methods

Non-pathogenic members (Enterococcus mundtii, Staphylococcus carnosus, Acinetobacter kookii, Pseudomonas fluorescens and Escherichia coli) of genera of ESKAPE strains were photoinactivated in PBS with irradiation wavelengths of 222 and 254 nm (no non-pathogenic Klebsiella was available). Log reduction doses were determined and compared to published photoinactivation results on ESKAPE pathogens. It was assumed that non-pathogenic bacteria could be designated as surrogates for one wavelength and one ESKAPE strain, if the doses were between the 25 and 75% quantiles of published log reduction dose of the corresponding pathogen.

Results

For all non-pathogen relatives (except A. kookii), higher average log reduction doses were required for irradiation at 222 nm than at 254 nm. Comparison by boxplot revealed that five of eight determined log reduction doses of the possible surrogates were within the 25 and 75% quantiles of the data for ESKAPE pathogens. The measured log reduction dose for non-pathogenic E. coli was above the 75% quantile at 222 nm, and the log reduction dose for S. carnosus was below the 25% quantile at 254 nm.

Conclusion

For more than half of the studied cases, the examined ESKAPE relatives in this study can be applied as surrogates for ESKAPE pathogens. Because of lack of data, no clear statement could be made for Enterococcus faecalis at 222 nm and Acinetobacter baumannii at both wavelengths.

Recent progress and challenges facing ballast water treatment - A review

The transoceanic movement of non-indigenous microorganisms and organic and inorganic contaminants through the transfer of ballast water of ocean-going vessels can be considered highly likely. The introduction of contaminants and non-indigenous microorganisms can cause changes in indigenous microorganisms, marine species, and biota, which can create problems for the ecology, economy, environment, and human health. This paper compiles and presents ballast water treatment system concepts, principles of inactivation mechanisms used, and the advantages and challenges of the treatment technologies. In addition, the paper aims to draw attention to the relationship between various organisms and the individual mechanism to be inactivated, including the effect of external factors (e.g., pH, salinity, turbidity) on inactivation efficiency. This review can assist in the choice of a suitable ballast water treatment system, taking into account the water conditions (e.g., pH, temperature, salinity) and indigenous species of the maritime areas where the ships intend to operate. This review also provides information describing the responses of the various organisms to different treatment techniques.

Characterization of marine dissolved organic matter and its effect on ozonation

As the marine industry develops, the importance of seawater treatment process is increasing. To treat seawater, oxidation processes have primarily been used, such as ballast water treatment systems, aquaculture farm operations, aquarium management, and seawater desalination. However, dissolved organic matter in seawater, whose characteristics vary spatially and seasonally, affects the efficiency of oxidation processes. Therefore, in this study, seawater samples were acquired from various locations in the Republic of Korea to understand the spatio-temporal patterns of marine dissolved organic matter. It was reported that the characterization of marine dissolved organic matter using liquid chromatography-organic carbon detector and excitation-emission matrix-parallel factor modeling. Furthermore, the effects of marine dissolved organic matter were evaluated on ozonation, an oxidation process. The results demonstrate that marine dissolved organic matter varies in its aquagenic, pedogenic, and intermediate characteristics based on region and season. These variations affect ozonation by influencing the consumption of oxidants (e.g., bromine). As a result, it was concluded that characterizing marine dissolved organic matter can help improve the effectiveness of oxidation processes, particularly ozonation.

Improving the microalgae inactivating efficacy of ultraviolet ballast water treatment in combination with hydrogen peroxide or peroxymonosulfate salt

Due to the increasing number of ecosystem invasions with the introduction of exogenous species via ballast water, the International Maritime Organization adopted the Ballast Water Convention (BWMC). The BWMC establishes standards for the concentration of viable organisms in a ballast water discharge. Ultraviolet (UV) irradiation is commonly used for treating ballast water; however, regrowth after UV irradiation and other drawbacks have been reported. In this study, improvement in UV treatment with the addition of hydrogen peroxide or peroxymonosulfate salt was investigated using the microalgae Tetraselmis suecica as the target organism. Results reported that each of these reagents added in a concentration of 10 ppm reduced the concentration of initial cells by more than 96%, increased the UV inactivation rate, and enabled reaching greater level of inactivation with the treatment. These improvements imply a reduction of the UV doses required for a consistent compliance with the BWMC standards.

A comparison of photolytic, photochemical and photocatalytic processes for disinfection of recirculation aquaculture systems (RAS) streams

The development of technologically advanced recirculation aquaculture systems (RAS) implies the reuse of water in a high recirculation rate (>90%). One of the most important phases for water management in RAS involves water disinfection in order to avoid proliferation of potential pathogens and related fish diseases. Accordingly, different approaches have been assessed in this study by performing a comparison of photolytic (UV-LEDs) at different wavelengths (λ = 262, 268 and 262 + 268 nm), photochemical (UV-LEDs/H₂O₂, UV-LEDs/HSO₅^- and UV-LEDs/S₂O₈^2-) and photocatalytic (TiO₂/SiO₂/UV-LEDs and ZnO/SiO₂/UV-LEDs) processes for the disinfection of water in RAS streams. Different laboratory tests were performed in batch scale with real RAS stream water and naturally occurring bacteria (Aeromonas hydrophyla and Citrobacter gillenii) as target microorganisms. Regarding photolytic processes, higher inactivation rates were obtained by combining λ_262+268 in front of single wavelengths. Photochemical processes showed higher efficiencies by comparison with a single UV-C process, especially at 10 mg L^-1 of initial oxidant dose. The inactivation kinetic rate constant was improved in the range of 15-38%, with major efficiency for UV/H₂O₂ ∼ UV/HSO₅^- > UV/S₂O₈^2-. According to photocatalytic tests, higher efficiencies were obtained by improving the inactivation kinetic rate constant up to 55% in comparison with a single UV-C process. Preliminary cost estimation was conducted for all tested disinfection methods. Those results suggest the potential application of UV-LEDs as promoter of different photochemical and photocatalytic processes, which are able to enhance disinfection in particular cases, such as the aquaculture industry.

Efficient inactivation of bacteria in ballast water by adding potassium peroxymonosulfate alone: Role of halide ions

In recent years, ballast water disinfection has been paid much more attention due to the untreated discharged ballast water posing threaten of biological invasion and health related consequences. In this study, an effective and simple approach for ballast water disinfection by just adding potassium peroxymonosulfate (PMS) was assessed, and the role of halide ions in seawater on the enhancement of inactivation was revealed. The reactive species responsible for inactivation, the leakage of intracellular materials, and changes of cellular morphology after inactivation were evaluated to explore the inactivation mechanism. The results showed that Escherichia coli and Bacillus subtilis in ballast water could be totally inactivated within 10 min by adding 0.2 mM PMS alone. The inactivation of bacteria in ballast water fitted to the delayed Chick-Watson model. Chloride and bromide ion in seawater were found to play a crucial role in inactivating bacteria, while the effect of iodide ion could be negligible due to its relative lower concentration in seawater. Chlorine and bromine, produced by the reaction of PMS with chloride and bromide ion, were proved to be the main reactive components that were responsible for the inactivation of bacteria. The extracellular ATP and total nitrogen concentration increased after inactivation which indicated that cell membrane was destroyed by reactive oxidants produced by the reaction between PMS and halide ions. The change of cell morphology confirmed that bacteria were seriously damaged after inactivation. The results suggest that PMS is an attractive alternative disinfectant for ballast water disinfection and this application deserved further research.

Effect of the length of dark storage following ultraviolet irradiation of Tetraselmis suecica and its implications for ballast water management

Meeting the recent biological standards established by the Ballast Water Management Convention requires the application of ballast water treatment systems; ultraviolet irradiation is a frequently used option. However, organisms can repair the damage caused by ultraviolet irradiation primarily with photo-repair mechanisms that are dependent on the availability of light. The objective of this study is to quantify the impact of dark storage following ultraviolet irradiation on the viability of the microalgae Tetraselmis suecica. Results showed that one day of dark storage after ultraviolet irradiation enhanced the inactivation rate by 50% with respect to the absence of dark storage and increased up to the 84% with five days of dark storage. These results are consistent with photorepair, mostly in the first two days, prevented in the dark. The dose required to inactivate a determined ratio of organisms was correlated with the length of the dark post-treatment according to an inverse proportional function. This correlation may help to optimize the operation of ultraviolet ballast water treatment systems. Further, the results show that growth assays can detect organisms that are capable of repair after treatment with UV.

Kinetic study and performance comparison of TiO2-mediated visible-light-responsive photocatalysts for the inactivation of Aspergillus niger

Fungi are highly survived with exceptional resistance to environmental stress. Conventional fungicides are quite efficient, but the increase in use raises severe environmental problems. In this study, environmentally friendly TiO₂-mediated visible-light-responsive photocatalysts, namely N-TiO₂, N-T-TiO_2, C-TiO₂, and Pd-C-TiO₂, were used to compare the performance of disinfecting a mold fungi Aspergillus niger. Key parameters, including photocatalyst dosage, the initial fungal concentration, and visible-light intensity, affecting the disinfecting process, was investigated. A new developed Light-responsive Modified Hom's (LMH) kinetic model incorporating visible-light intensity and photocatalyst light-absorption coefficient was firstly used to predict such photocatalytic process in fungal inactivation. Among the photocatalysts, Pd-C-TiO₂ showed the highest inactivation performance against fungi, followed by C-TiO₂, N-T-TiO_2, and N-TiO₂. In general, inactivation increased with increasing photocatalyst dosage and light intensity while decreased with increasing initial fungal concentration. For kinetic modeling, the LMH model supports the hypothesis that photocatalyst performance toward visible-light-driven fungal inactivation primarily depends on the light-absorption capacity of the photocatalyst. In conclusion, mold fungi Aspergillus niger are effectively disinfected by TiO₂-mediated visible-light-responsive photocatalysts, and such fungal inactivation process could be predicted by LMH kinetic model.

Application of persulfate salts for enhancing UV disinfection in marine waters

Over the years, industrial activities that generate high salinity effluents have been intensifying; this has relevant potential for causing organic and microbiological pollution which damages both human and ocean health. The development of new regulations, such as ballast water convention, encourage the development of treatment systems that can be feasible for treating seawater effluents. Accordingly, an approach based on the UV activation of persulfate salts has been assessed. In this scenario, two different persulfate sources (S₂O₈^2- and HSO₅^-) were evaluated under UV-C irradiation for disinfection purposes. An optimization process was performed with low chemical doses (<1 mM). In order to extensively examine the applicability on seawater, different water matrices were tested as well as different microorganisms including both fecal and marine bacteria. An enhancement of UV-inactivation with the addition of persulfate salts was achieved in all cases, kinetic rate constant has been accelerated by up to 79% in seawater. It implies a UV-dose saving up to 45% to achieve 4-log reductions. Best efficiencies were obtained with [HSO₅^-] = 0.005 mM and [S₂O₈^2-] = 0.5 mM. Higher effectiveness was obtained with the use of HSO₅^- due to its low stability and interaction with chloride. Also, different responses were obtained according to the specific microorganisms by achieving faster disinfection in Gram-negative than in Gram-positive bacteria, the sensitivity observed was Vibrio spp. > E. coli > E. faecalis ≈ Marine Heterotrophic Bacteria. With an evaluation of regrowth after treatment, greater cell damage was detected with the addition of persulfate salts. The major ability of regrowth for marine bacteria encourages the use of a residual disinfectant after disinfection processes.

Microorganisms in ballast water: Disinfection, community dynamics, and implications for management

Increasing concerns have accelerated the development of international regulations and methods for ballast water management to limit the introduction of non-indigenous species. The transport of microorganisms with ballast water has received scientific attention in recent years. However, few studies have focused on the importance of organisms smaller than 10 μm in diameter. In this work, we review the effects of ballast water transport, disinfection, and the release of microorganisms on ecosystem processes with a special focus on heterotrophic bacteria. It is important to evaluate both direct and indirect effects of ballast water treatment systems, such as the generation of easily degradable substrates and the subsequent regrowth of heterotrophic microorganisms in ballast tanks. Disinfection of water can alter the composition of bacterial communities through selective recolonization in the ballast water or the recipient water, and thereby affects bacterial driven functions that are important for the marine food web. Dissolved organic matter quality and quantity and the ecosystem status of the treated water can also be affected by the disinfection method used. These side effects of disinfection should be further investigated in a broader context and in different scales (laboratory studies, large-scale facilities, and on the ships).

Disinfection performance using a UV/persulfate system: effects derived from different aqueous matrices

The disinfectant power of UV combined with a persulfate salt has been assessed. The results obtained suggest this system as an attractive alternative to other photochemical processes currently in use for seawater treatment.

Study of marine bacteria inactivation by photochemical processes: disinfection kinetics and growth modeling after treatment

The importance of seawater treatment in order to avoid microbiological pollution related to aquaculture or ballast water management has increased during the last few years. Bacterial indicators used for the evaluation of different disinfection treatments are usually related with both waste and drinking water, these standards are not usual microorganisms found in seawater. Thus, it is thought necessary to study the behavior of different marine-specific organisms in regard to improve the disinfection processes in seawater. In this study, three different bacteria have been selected among major groups of bacterial community from marine waters: two water-associated, Roseobacter sp. and Pseudomonas litoralis, and one sediment-associated, Kocuria rhizophila. A kinetic inactivation model together with a post-treatment growth tendency has been obtained after the application of UV-C and UV/H₂O₂ processes. According to the first kinetic rate constant, different responses were obtained for the different bacterial groups. Once the treatment was applied, modeling of growth curves revealed high recover within the first 3 days after treatment, even when UV/H₂O₂ was applied. This study introduces a sensitivity index, in which results show different levels of resistance for both treatments, being Roseobacter sp. the most sensitive bacteria, followed by P. litoralis and K. rhizophila.

Inactivation of marine heterotrophic bacteria in ballast water by an Electrochemical Advanced Oxidation Process

Seawater treatment is increasingly required due to industrial activities that use substantial volumes of seawater in their processes. The shipping industry and the associated management of a ship's ballast water are currently considered a global challenge for the seas. Related to that, the suitability of an Electrochemical Advanced Oxidation Process (EAOP) with Boron Doped Diamond (BDD) electrodes has been assessed on a laboratory scale for the disinfection of seawater. This technology can produce both reactive oxygen species and chlorine species (especially in seawater) that are responsible for inactivation. The EAOP was applied in a continuous-flow regime with real seawater. Natural marine heterotrophic bacteria (MHB) were used as an indicator of disinfection efficiency. A biphasic inactivation kinetic model was fitted on experimental points, achieving 4-Log reductions at 0.019 Ah L^-1. By assessing regrowth after treatment, results suggest that higher bacterial damages result from the EAOP when it is compared to chlorination. Furthermore, several issues lacking fundamental understanding were investigated such as recolonization capacity or bacterial community dynamics. It was concluded that, despite disinfection processes being effective, there is not only a possibility for regrowth after treatment but also a change on bacterial population diversity produced by the treatment. Finally, energy consumption was estimated and indicated that 0.264 kWh·m^-3 are needed for 4.8-Log reductions of MHB; otherwise, with 0.035 kWh·m^-3, less disinfection efficiency can be obtained (2.2-Log red). However, with a residual oxidant in the solution, total inactivation can be achieved in three days.