Removal of pharmaceuticals and personal care products by two-stage biofiltration for drinking water treatment

Optimizing removal of antiretroviral drugs from tertiary wastewater using chlorination and AI-based prediction with response surface methodology

Chemical and pharmaceutical chemicals found in water sources create substantial risks to human health and the environment. The presence of pharmaceutical contaminants in water can cause antibiotic resistance development, toxicity to aquatic organisms, and endocrine disruption. Hence, the elimination of chemicals and other contaminants from wastewater prior to its release is a burgeoning concern in the domains of engineering and science. The use of treatment technologies in wastewater treatment plants can remove pharmaceutical contaminants through the oxidation process. However, many traditional wastewater treatment plants lack the advanced monitoring tools required to detect low concentrations of pharmaceuticals. Without the ability to detect these compounds, it's challenging to treat them effectively. The goal of this study was to use Response Surface Methodology (RSM) and Artificial Neural Networks (ANN) algorithms to model and improve how Nevirapine and Efavirenz break down in different chlorination conditions. The RSM analysis revealed statistically significant models (F-values: Nevirapine, pH-t: 108.15, T-t: 76.55, ICC-t: 110.84), indicating a strong correlation between operational parameters (pH, temperature, and initial chlorine concentration) and degradation behavior. The ANN model accurately predicted the degradation of both Nevirapine and Efavirenz under various chlorination conditions, as confirmed by analyzing actual-predicted graphs, residual plots, and Mean Squared Error (MSE) values. The ANN model using ICC-t achieved the highest MOD value of 31.31 % for Nevirapine. The ANN model based on ICC-t yielded a maximum MOD value of 16.06 % for Efavirenz. These findings provide valuable insights into optimizing chlorination processes for better removal of these pharmaceutical contaminants from water.

When antibiotics encounter microplastics in aquatic environments: Interaction, combined toxicity, and risk assessments

Antibiotics and microplastics (MPs), known as emerging pollutants, are bound to coexist in aquatic environments due to their widespread distribution and prolonged persistence. To date, few systematic summaries are available for the interaction between MPs and antibiotics in aquatic ecosystems, and a comprehensive reanalysis of their combined toxicity is also needed. Based on the collected published data, we have analyzed the source and distribution of MPs and antibiotics in global aquatic environments, finding their coexistence occurs in a lot of study sites. Accordingly, the presence of MPs can directly alter the environmental behavior of antibiotics. The main influencing factors of interaction between antibiotics and MPs have been summarized in terms of the characteristics of MPs and antibiotics, as well as the environmental factors. Then, we have conducted a meta-analysis to evaluate the combined toxicity of antibiotics and MPs on aquatic organisms and the related toxicity indicators, suggesting a significant adverse effect on algae, and inapparent on fish and daphnia. Finally, the environmental risk assessments for antibiotics and MPs were discussed, but unfortunately the standardized methodology for the risk assessment of MPs is still challenging, let alone assessment for their combined toxicity. This review provides insights into the interactions and environment risks of antibiotics and MPs in the aquatic environment, and suggests perspectives for future research.

Pharmaceutical removal from wastewater by introducing cytochrome P450s into microalgae

Pharmaceuticals are of increasing environmental concern as they emerge and accumulate in surface- and groundwater systems around the world, endangering the overall health of aquatic ecosystems. Municipal wastewater discharge is a significant vector for pharmaceuticals and their metabolites to enter surface waters as humans incompletely absorb prescription drugs and excrete up to 50% into wastewater, which are subsequently incompletely removed during wastewater treatment. Microalgae present a promising target for improving wastewater treatment due to their ability to remove some pollutants efficiently. However, their inherent metabolic pathways limit their capacity to degrade more recalcitrant organic compounds such as pharmaceuticals. The human liver employs enzymes to break down and absorb drugs, and these enzymes are extensively researched during drug development, meaning the cytochrome P450 enzymes responsible for metabolizing each approved drug are well studied. Thus, unlocking or increasing cytochrome P450 expression in endogenous wastewater microalgae could be a cost-effective strategy to reduce pharmaceutical loads in effluents. Here, we discuss the challenges and opportunities associated with introducing cytochrome P450 enzymes into microalgae. We anticipate that cytochrome P450-engineered microalgae can serve as a new drug removal method and a sustainable solution that can upgrade wastewater treatment facilities to function as "mega livers".

Sustainable approaches for removing toxic heavy metal from contaminated water: A comprehensive review of bioremediation and biosorption techniques

In this comprehensive study, highlights emerging environmentally friendly methods to eliminating hazardous heavy metals from contaminated water, with an emphasis on bioremediation and biosorption. Breakthroughs, such as the combination of biological remediation and nanotechnology to improve the elimination of metals effectiveness and the use of genetically modified microbes for targeted pollutant breakdown. Developing biosorption materials made from agricultural waste and biochar, this indicates interesting areas for future research and emphasizes the necessity of sustainable practices in tackling heavy metal contamination in water systems. There seems to be a surge in enthusiasm for the utilization of biological remediation and biosorption methods as sustainable and viable options for eliminating heavy metals from contaminated water in the past couple of decades. The present review intends to offer an in-depth review of the latest understanding and advances in the discipline of biological remediation methods like bioaccumulation, biofiltration, bio-slurping, and bio-venting. Biosorption is specifically explained and includes waste biomass as biosorbent with the removal mechanisms and the hindrances caused in the process are detailed. Advances in biosorption like microbes as biosorbents and the mechanism involved in it. Additionally, novel enhancement techniques like immobilization, genetic modification, and ultrasound-assisted treatment in microbial sorbent are clarified. However, the review extended with analyzing the future advances in the overall biological methods and consequences of heavy metal pollution.

Deciphering the synergistic effects of photolysis and biofiltration to actuate elimination of estrogens in natural water matrix

The presence of estrogens in water environments has raised concerns for human health and ecosystems balance. These substances possess potent estrogenic properties, causing severe disruptions in endocrine systems and leading to reproductive and developmental problems. Unfortunately, conventional treatment methods struggle to effectively remove estrogens and mitigate their effects, necessitating technological innovation. This study investigates the effectiveness of a novel sequential photolysis-granular activated carbon (GAC) sandwich biofiltration (GSBF) system in removing estrogens (E1, E2, E3, and EE2) and improving general water quality parameters. The results indicate that combining photolysis pre-treatment with GSBF consistently achieved satisfactory performance in terms of turbidity, dissolved organic carbon (DOC), UV254, and microbial reduction, with over 77.5 %, 80.2 %, 89.7 %, and 92 % reduction, respectively. Furthermore, this approach effectively controlled the growth of microbial biomass under UV irradiation, preventing excessive head loss. To assess estrogen removal, liquid chromatography-tandem mass spectrometry (LC-MS) measured their concentrations, while bioassays determined estrogenicity. The findings demonstrate that GSBF systems, with and without photolysis installation, achieved over 96.2 % removal for estrogens when the spike concentration of each targeted compound was 10 µg L-1, successfully reducing estrogenicity (EA/EA0) to levels below 0.05. Additionally, the study evaluated the impact of different thicknesses of GAC layer filling (8 cm, 16 cm, and 24 cm) and found no significant difference (p>0.05) in estrogen and estrogenicity removal among them.

Silk Nanofibril-Palygorskite Composite Membranes for Efficient Removal of Anionic Dyes

To develop membrane materials with good performance for water purification that are green and low cost, this work reports an organic-inorganic composite membrane composed of silk nanofibrils (SNFs) and palygorskite (PGS). To improve the stability of the the composite membrane, genipin was used as a crosslinking agent to induce the conformational transition of SNF chains from random coils to β-sheets, reducing the swelling and hydrolysis of the membrane. The separation performance can be adjusted by tailoring the component ratio of the nanomaterial. The results showed that these membranes can effectively remove anionic dyes from water, and they exhibit excellent water permeability. The SNF-based membrane had strong mechanical and separation properties, and the PGS could tune the structure of composite membranes to enhance their permeability, so this green composite membrane has good prospects in water treatment and purification applications.

The distinct resistance mechanisms of cyanobacteria and green algae to sulfamethoxazole and its implications for environmental risk assessment

Cyanobacteria and green algae are the OECD recommended test organisms for environmental toxicity assessments of chemicals. Whether the differences in these two species' responses to the identical chemical affect the assessment outcomes is a question worth investigating. Firstly, we investigated the distinct resistance mechanisms of Synechococcus sp. (cyanobacteria) and R. subcapitata (green algae) to sulfamethoxazole (SMX). The antioxidant system analysis demonstrated that R. subcapitata mainly relies on enhancing the activity of first line defense antioxidants, including superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GPx), which is the most powerful and efficient response to get rid of ROS, whereas Synechococcus sp. depends upon increasing the activity of glutathione-S-transferase (GST) and GPx to resist oxidative stress. Besides, a total 7 transformation products (TPs) of SMX were identified in R. subcapitata culture medium. The analysis of conjectural transformation pathways and the predicted toxicity indicates that R. subcapitata could relieve SMX toxicity by degrading it to low eco-toxic TPs. Additionally, we summarized numerous exposure data and assessed the environmental risk of various antibiotics, revealing an inconsistent result for the same type of antibiotic by using cyanobacteria and green algae, which is most likely due to the different resistance mechanisms. In the future, modified indicators or comprehensive assessment methods should be considered to improve the rationality of environmental toxicity assessments.

Impacts of algal organic matter and humic substances on microcystin-LR removal and their biotransformation during the biodegradation process

The application of bioaugmentation (i.e., injection of contaminant-degrading microorganisms) has shown its potential to remove harmful cyanotoxins like microcystin-LR (MC-LR) from drinking water sources. However, the natural organic matter (NOM) present in both natural and engineered water systems might affect the bacterial biodegradation of MC-LR. Therefore, for the successful application of bioaugmentation for MC-LR removal in water treatment, it is important to understand NOM effects on MC-LR biodegradation. In this study, the impact of NOM [algal organic matter (AOM) and humic substances (HS)] on MC-LR biodegradation was evaluated in the presence of varying concentrations of NOM by monitoring MC-LR biodegradation kinetics. The changes in NOM composition during MC-LR biodegradation were also characterized by a five-component Parallel factor (PARAFAC) model using 336 excitation-emission matrix (EEM) spectra collected at different sampling points. Our results showed decreases in MC-LR biodegradation rate of 1.6-and 3.4-fold in the presence of AOM and HS, respectively. The expression of the functional mlrA gene exhibited a similar trend to the MC-LR degradation rate at different NOM concentrations. EEM-PARAFAC analyses and NOM molecular size fractionation results indicated a relatively greater production of terrestrial humic-like components (57%) and a decrease of protein-like components. Two-dimensional correlation spectroscopy (2D-COS) analyses further confirmed that low molecular weight protein-like components were initially utilized by bacteria, followed by the formation of higher molecular weight humic-like components, likely due to microbial metabolism.

Antibiotic Toxicity Isolated and as Binary Mixture to Freshwater Algae Raphidocelis subcapitata: Growth Inhibition, Prediction Model, and Environmental Risk Assessment

Antibiotics in aqueous environments can have extremely adverse effects on non-targeted organisms. However, many research projects have only focused on the toxicological evaluation of individual antibiotics in various environments. In the present work, individual and binary mixture toxicity experiments have been conducted with the model organism Raphidocelis subcapitata (R. subcapitata), and a mixture concentration-response curve was established and contrasted with the estimated effects on the basis of both the concentration addition (CA) and the independent action (IA) models. In addition, different risk assessment methods were used and compared to evaluate the environmental risk of binary mixtures. The toxic ranking of the selected antibiotics to R. subcapitata was erythromycin (ERY) > sulfamethoxazole (SMX) > sulfamethazine (SMZ). In general, the conclusion of this study is that the adverse effects of binary mixtures are higher than the individual antibiotics. The CA model and RQSTU are more suitable for toxicity prediction and risk assessment of binary mixtures. This study reveals the potential ecological risks that antibiotics and their mixtures may pose to water ecosystems, thus providing scientific information for environmental quality regulation.

Sand and sand-GAC filtration technologies in removing PPCPs: A review

Concerns have been raised about the risks that pharmaceuticals and personal care products (PPCPs) in aquatic environments posed to humans and the environment. In recent years, sand filtration has been used to potentially remove these emerging contaminants from water. However, there has been no review of the effectiveness of this technology to date. This paper presents a brief introduction of sand filtration types, reviews the current progress in PPCPs removal through sand filtration, and discusses the mechanisms behind this process and the combination of granular activated carbon (GAC) and sand as an enhanced sand-GAC filtration technology. Sand filtration achieves a reasonable but highly variable degree of PPCPs removal. Biodegradation and adsorption are the two main mechanisms of PPCPs removal, in particular the biodegradation since adsorption capacity of sand is relatively low. Other processes, such as bio-sorption and indirect adsorption, may also contribute to PPCPs removal. To compensate for the inadequate PPCPs removal through sand filtration, porous GAC has been combined with sand to develop sand-GAC filtration technologies. Serial, dual, and sandwich filters have been investigated, and significant removal enhancement has been observed, due to the strengthened adsorption capacity, suggesting the applicability of these variants. Future research focus, such as investigating the influence of different operational conditions on sand filter performance, obtaining a deeper understanding of the various removal mechanisms, and investigating of long-term performance of the filter used for PPCPs removal, are suggested.

A Critical Remark on the Applications of Gas-Phase Biofilter (Packed-Bed Bioreactor) Models in Aqueous Systems

The principles of gas-phase biofilter systems, modeling, and operations are quite different from liquid-phase biofilter systems. Because of “biofilter” terminology used in both gas and liquid-phase systems, researchers often mistakenly use gas-phase models in liquid-phase applications for the analysis of data and determining kinetic parameters. For example, recent studies show a well-known gas-phase biofilter model, known as Ottengraf–Van Den Oever zero-order diffusion-limited model, is applied for analysis of experimental data from an aqueous biofilter system which is used for the removal of toxic divalent copper [Cu(II)] and chromium (VI). The objective of this research is to present the limitations and principles of gas-phase biofilter models and to highlight the incorrect use of gas-phase biofilter models in liquid-phase systems that can lead to erroneous results. The outcome of this work will facilitate scientists and engineers in distinguishing two different systems and selecting a more suitable biofilter model for the analysis of experimental data in determining kinetic parameters.

Optimization, Nature, and Mechanism Investigations for the Adsorption of Ciprofloxacin and Malachite Green onto Carbon Nanoparticles Derived from Low-Cost Precursor via a Green Route

The spread of organic pollutants in water spoils the environment, and among the best-known sorbents for removing organic compounds are carbonaceous materials. Sunflower seed waste (SFSW) was employed as a green and low-cost precursor to prepare carbon nanoparticles (CNPs) via pyrolysis, followed by a ball-milling process. The CNPs were treated with a nitric–sulfuric acid mixture (1:1) at 100 °C. The scanning electron microscopy (SEM) showed a particle size range of 38 to 45 nm, and the Brunauer–Emmett–Teller (BET) surface area was 162.9 m2 g−1. The elemental analysis was performed using energy-dispersive X-ray spectroscopy, and the functional groups on the CNPs were examined with Fourier transform infrared spectroscopy. Additionally, an X-ray diffractometer was employed to test the phase crystallinity of the prepared CNPs. The fabricated CNPs were used to adsorb ciprofloxacin (CFXN) and malachite green (MLG) from water. The experimentally obtained adsorption capacities for CFXN and MLG were 103.6 and 182.4 mg g−1, respectively. The kinetic investigation implied that the adsorption of both pollutants fitted the pseudo-first-order model, and the intraparticle diffusion step controlled the process. The equilibrium findings for CFXN and MLG sorption on the CNPs followed the Langmuir and the Fredulich isotherm models, respectively. It was concluded that both pollutants spontaneously adsorbed on the CNPs, with physisorption being the likely mechanism. Additionally, the FTIR analysis of the adsorbed CFXN showed the disappearance of some functional groups, suggesting a chemisorption contribution. The CNPs showed an excellent performance in removing CFXN and MLG from groundwater and seawater samples and possessed consistent efficiency during the recycle–reuse study. The application of CNPs to treat synthetically contaminated natural water samples indicated the complete remediation of polluted water using the ball-mill-fabricated CNPs.

Application of Water Hyacinth Biomass (Eichhornia crassipes) as an Adsorbent for Methylene Blue Dye from Aqueous Medium: Kinetic and Isothermal Study

Water pollution has generated the need to develop technologies to remove industrial pollutants. Adsorption has been recognized as one of the most effective techniques for effluent remediation. In this study, parts (stem and leaves) of a problematic aquatic weed, the water hyacinth (Eichhornia crassipes), were separated to produce a bioadsorbent. The objective was to evaluate the adsorption of a cationic dye, methylene blue (MB), in an aqueous solution of the biomass from different parts of the water hyacinth (Eichhornia crassipes) plants. The materials were characterized through techniques of infrared spectroscopy, scanning electron microscopy, X-ray diffractometry, and thermogravimetric analysis, before and after the material adsorption. Water hyacinth biomasses presented adsorption capacity above 89%, and the kinetics was faster for stem biomass. The kinetic study found that the adsorption process is better described by the pseudo-second-order model, and the adjustments of the isotherm experimental data indicated that both materials are favorable for adsorption. Therefore, water hyacinth bioadsorbent represents a renewable resource with potential for effluent treatment.

A review on advances in removal of endocrine disrupting compounds from aquatic matrices: Future perspectives on utilization of agri-waste based adsorbents

In the recent past, a class of emerging contaminants particularly endocrine disrupting compounds (EDCs) in the aquatic environment have gained a lot of attention. This is due to their toxic behaviour, affecting endocrine activities in humans as well as among aquatic animals. Presently, there are no regulations and discharge limits for EDCs to preclude their negative impact. Furthermore, the conventional treatment processes fail to remove EDCs efficiently. This necessitates the need for more research aimed at development of advanced alternative treatment methods which are economical, efficient, and sustainable. This paper focusses on the occurrence, fate, toxicity, and various treatment processes for removal of EDCs. The treatment processes (physical, chemical, biological and hybrid) have been comprehensively studied highlighting their advantages and disadvantages. Additionally, the use of agri-waste based adsorption technologies has been reviewed. The aim of this review article is to understand the prospect of application of agri-waste based adsorbents for efficient removal of EDCs. Interestingly, research findings have indicated that the use of these low-cost and abundantly available agri-waste based adsorbents can efficiently remove the EDCs. Furthermore, the challenges and future perspectives on the use of agri-waste based adsorbents have been discussed.

Adsorbent selection for pesticides removal from drinking water

Pesticides present in water resources can cause adverse health effects even in low concentrations, due to their bio-accumulative character. Therefore, the challenge for drinking water production increases, due to the limitations of conventional water treatment technologies in the removal of small molecular weight dissolved compounds. This work aimed to provide technical and scientific support for the selection of pulverized activated carbon - PACs, granular activated carbon - GACs, and carbon nanotubes - CNT concerning atrazine - ATZ, simazine - SMZ, and diuron - DIU adsorption for application in water treatment plants, considering two forms of application commercial product - CP and analytical standard - SD. These forms of application were tested aiming to verify the influence of the purity of the products used in experiments on the adsorption efficiency. It was possible to verify the adsorption efficiencies were not guided only by the characteristics of the adsorptive materials used, and that the selection should not be carried out only based on the, specific superficial area - BET size and distribution of specific pore volume. The isotherms demonstrated that the parameter Kf associated with the results of the selection experiment can be considered an alternative technical tool of simple application and sufficient for this purpose. Also, the capacity of activated carbons - ACs and nanomaterials - NMs were affected by the application of the compounds, highlighting the importance of using commercial product - CP in scientific research and technical investigations.Hightlights The pesticides efficiency removal was affected due to the forms of application, SD and CP;The parameters IN and MBI were not decisive in the selection of the activated carbon;The main adsorption mechanism in all the materials was chemical;GAC was the most efficient adsorbent in the removal of the pesticides;An adequate adsorbent selection is crucial for satisfactory removal of pesticides in water.

Enhanced removal efficiency of sulfamethoxazole by acclimated microalgae: Tolerant mechanism, and transformation products and pathways

This study utilized sulfamethoxazole (SMX) acclimatization to enhance the tolerance and biodegradation capacity of Chlorella vulgaris. Compared to wild C. vulgaris, the growth inhibition and oxidative damage induced by SMX evidently decreased in acclimated C. vulgaris, and meanwhile photosynthetic and antioxidant activities were significantly promoted. The physiological analyses with the aid of principal component analysis revealed the increase of catalase and glutathione reductase activities was the critical tolerant mechanism of acclimated C. vulgaris. As the consequence, the acclimated C. vulgaris exhibited enhanced efficiency and (pseudo-first-order) kinetic rate for removal of SMX. The distribution analysis of residual SMX demonstrated the biodegradation was the major removal mechanism of SMX by C. vulgaris, while bioadsorption and bioaccumulation made pimping contributions. During the degradation process of SMX, nine transformation products (TPs) were identified. Based on the identified TPs, a possible transformation pathway was proposed.

Alternanthera spp. based-phytoremediation for the removal of acetaminophen and methylparaben at mesocosm-scale constructed wetlands

Recently, the spread of pharmaceuticals and personal care products (PPCPs) in the aquatic environment has steadily increased. In this study, phytoremediation technology, using an ornamental plant (Alternanthera spp.), was investigated to improve the removal of acetaminophen (AC) and methylparaben (MP) from a synthetically prepared wastewater. Three exposure lines (AC-line, MP-line and control-line) were performed with a total of 26 subsurface-horizontal constructed wetlands (SSH-CWs) that operated in batch feeding mode. The influence of plants in addition to the initial spiking concentration (20, 60 and 100 mg/L) of AC and MP on the removal efficiency was evaluated throughout the 35-days experiments. The highest removal efficiencies for AC and MP were 88.6% and 66.4%, respectively, achieved in the planted CWs; whereas only 29.7% and 21.9% were achieved in the control CWs for AC and MP, respectively. The results confirmed the role of Alternanthera spp. for accelerating the removal of AC and MP from synthetically contaminated wastewater in CWs.

Biodegradation of salicylic acid, acetaminophen and ibuprofen by bacteria collected from a full-scale drinking water biofilter

This study examined the biodegradation of two pharmaceuticals-acetaminophen, and ibuprofen, and one natural organic surrogate-salicylic acid, by bacteria seeded from backwash water collected from a full-scale biofiltration plant. The degradation was studied in the presence of oxygen. Complete removal of salicylic acid was observed in 27-66 h depending on the seasonality of the collected backwash water, while 90-92% acetaminophen removal was observed in more than 225 h. Ibuprofen demonstrated poor removal efficiencies with only 50% biodegradation after 230 h. Adenosine tri phosphate (ATP) in the reactor was found to be linked with the biodegradation rate. ATP was found to be correlated with oxygen uptake rate (OUR). ATP also had a correlation with each of extracellular polymeric substances (EPS), protein and polysaccharides. These results highlight the potential for increasing the biodegradation rates to achieve enhanced contaminant removal.

Microplastic particles in the aquatic environment: A systematic review

Microplastics (MPs) pollution has become one of the most severe environmental concerns today. MPs persist in the environment and cause adverse effects in organisms. This review aims to present a state-of-the-art overview of MPs in the aquatic environment. Personal care products, synthetic clothing, air-blasting facilities and drilling fluids from gas-oil industries, raw plastic powders from plastic manufacturing industries, waste plastic products and wastewater treatment plants act as the major sources of MPs. For MPs analysis, pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), Py-MS methods, Raman spectroscopy, and FT-IR spectroscopy are regarded as the most promising methods for MPs identification and quantification. Due to the large surface area to volume ratio, crystallinity, hydrophobicity and functional groups, MPs can interact with various contaminants such as heavy metals, antibiotics and persistent organic contaminants. Among different physical and biological treatment technologies, the MPs removal performance decreases as membrane bioreactor (> 99%) > activated sludge process (~98%) > rapid sand filtration (~97.1%) > dissolved air floatation (~95%) > electrocoagulation (> 90%) > constructed wetlands (88%). Chemical treatment methods such as coagulation, magnetic separations, Fenton, photo-Fenton and photocatalytic degradation also show moderate to high efficiency of MP removal. Hybrid treatment technologies show the highest removal efficacies of MPs. Finally, future research directions for MPs are elaborated.

Orbitrap mass spectrometry for the molecular characterization of water resource recovery from polluted surface water using membrane bioreactor

The increasing organic contamination of surface water hinders the conventional tap water treatment process. Membrane bioreactors (MBRs) are a promising alternative technology for recovering water from polluted surface water. In this study, the composition changes of dissolved organic matters (DOMs) in MBR and ultraviolet/ozone (UV/O₃)-MBR systems for polluted surface water treatment were investigated using Orbitrap mass spectrometry analysis with unknown screening. The intense DOM ions within a mass-to-charge ratio range of 100-500 was detected, and 2340 molecular formulae from 5743 peaks were assigned to the two systems. The most abundant components were formulae with C, H, O, N, and CHO only classes. The highest formulae decrease including CHO, CHON, CHOS, and CHONS were attributed to the bio-carrier used in both systems. Results showed that bioprocess was the main contributor in the DOM reduction, and the integration of UV/O₃ into the MBR improved the DOM composition changes. Biodegradable components with low O/C ratio in the CHO and CHON classes remarkably increased in the UV/O₃-MBR system. The integration of UV/O₃ as a polishing step in the recirculation stream of MBR system was effective in improve the DOM removal.

Transformation of iopamidol and atrazine by peroxymonosulfate under catalysis of a composite iron corrosion product (Fe/Fe3O4): Electron transfer, active species and reaction pathways

Cast iron pipes are commonly applied in drinking water distribution systems (DWDSs); peroxymonosulfate (PMS) is a promising alternative for drinking water disinfection; organic micropollutants is still present in drinking water after waterworks' treatment. However, iron corrosion products may affect the reactions between a disinfectant and organic micropollutants. The study investigated the transformation of iopamidol (IPM) and atrazine (ATZ) by PMS under the catalysis of a composite iron corrosion product (Fe/Fe₃O₄). The pseudo-first-order rate constants (k) for the degradation of IPM and ATZ were 1.47 and 1.03 min^-1, respectively. Electron paramagnetic resonance (EPR) experiments indicated that PMS was effectively activated to yield sulfate radical (SO₄^•-) and hydroxyl radical (HO^•), mainly via the reduction by Fe component, dissolved Fe²⁺ and generated Feocta2+. SO₄^•- contributed more than HO^• to the degradation of IPM and ATZ, and the radical yield achieved 0.97 mol/mol. The k values reached maximum with Fe/Fe₃O₄ and PMS doses of 2.5 g L^-1 and 25 mg L^-1, respectively. The optimum mass fraction of Fe₃O₄ in Fe/Fe₃O₄ (MF_mag) and pH were 10% and 7.0, respectively. The k values increased with increasing temperature, while decreased in the presence of water matrix. Most of the iodine released from IPM was oxidized to IO₃^-, and NH₄⁺ was the dominant species of nitrogen released from ATZ. The identification of transformation intermediates showed that the radical chain reactions of IPM was mainly initiated from single electron transfer and radical adduct formation, while those of ATZ was primarily initiated from hydrogen atom abstraction and radical adduct formation.

Environmental Distribution of Personal Care Products and Their Effects on Human Health

Personal care products (PCPs) are generally used for personal hygiene, cleaning, grooming, and beautification. These include hair and skin care products, baby care products, UV blocking creams, facial cleansers, insect repellents, perfumes, fragrances, soap, detergents, shampoos, conditioners, toothpaste, etc., thus exposing humans easily. Personal preferences related to PCPs usage frequency are highly variable and depend on socioeconomic status and lifestyle factors. The increasing availability and diversity of PCPs from the retailer outlets consequently result in higher loading of PCPs into wastewater systems and, therefore, the environment. These compounds persistently and continuously release biologically active and inactive ingredients in the atmosphere, biosphere, geosphere, and demonstrating adverse effects on human, wild, and marine life. Advanced techniques such as granular activated carbon filtration and algae-based system may help biotransformation and remove PCP contaminants from water with improved efficiency. Additionally, harmony among PCPs related regulations of different countries may encourage standard checks to control their manufacturing, sale, and distribution across the borders to ensure consumers' safety. Furthermore, all intended ingredients, their concentrations, and instructions for frequency of use as per age groups may be clearly labeled on packages of PCPs. In conclusion, the emerging environmental contaminants of PCPs and their association with the growing risks of negative effects on human health and globally on the environment emphasize the chemical-free simple lifestyle.

Hazardous wastes treatment technologies

A review of the literature published in 2019 on topics related to hazardous waste management in water, soils, sediments, and air. The review covered treatment technologies applying physical, chemical, and biological principles for the remediation of contaminated water, soils, sediments, and air. PRACTICAL POINTS: This report provides a review of technologies for the management of waters, wastewaters, air, sediments, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) in three scientific areas of physical, chemical, and biological methods. Physical methods for the management of hazardous wastes including general adsorption, sand filtration, coagulation/flocculation, electrodialysis, electrokinetics, electro-sorption ( capacitive deionization, CDI), membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, potassium permanganate processes, and Fenton and Fenton-like process were reviewed. Biological methods such as aerobic, anoxic, anaerobic, bioreactors, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed. Case histories were reviewed in four areas including contaminated sediments, contaminated soils, mixed industrial solid wastes and radioactive wastes.

Transition Metal Dichalcogenide-Silk Nanofibril Membrane for One-Step Water Purification and Precious Metal Recovery

With the rapid worldwide industrial development, large amounts of pollutants such as heavy metals are discharged into the water sources, causing a huge threat to living beings. To mitigate this issue, there is an urgent need for new water treatment strategies. Inspired by a natural shell nacre structure and a multidimensional hybrid concept, we demonstrate multilayered inorganic-organic hybrid membranes using metallic molybdenum disulfide (MoS₂) as two-dimensional transition metal dichalcogenide nanosheets and one-dimensional silk nanofibrils for water purification. Because of its possessing negatively charged layers and interaction sites, the hybrid film could adsorb metal ions and dyes from water. The separation performance can be tuned by changing the component ratios of these two nanomaterials. During filtration, due to the reducing effect of the MoS₂ nanosheets, precious metal ions are reduced to their nanoparticle form without any further thermal or chemical treatments. In addition to the one-step removal and recovery of metal ions, the hybrid membranes exhibit excellent potential for the determination and removal of different dyes from water. The results of this research can open up an effective and green avenue for water purification and recovery of metal ions dissolved in water.

Potential toxic effects of chlorination and UV/chlorination in the treatment of hydrochlorothiazide in the water

Chlorination is a common disinfection method in water treatment. This method can be converted into an advanced oxidation process by incorporating UV irradiation during water treatment. This study investigated the degradation of hydrochlorothiazide (HCTZ) by chlorination and UV/chlorination in water. HCTZ is a diuretic medication that has been frequently detected in wastewater. For chlorination, the second-order rate constant for the reaction between HCTZ with free available chlorine was found to increase with increasing pH from 5 to 8 due to the increase of the anionic HCTZ fraction. UV/chlorination was found to be more efficient in removing HCTZ as compared with chlorination due to the presence of reactive radical species such as hydroxyl radicals. For transformation by-products, chlorination was found to produce two by-products via chlorination and hydroxylation reactions that occurred at the aromatic ring of HCTZ. For UV/chlorination, an additional by-product formed through a radical reaction at the heterocyclic moiety of HCTZ was detected. Based on the Escherichia coli inhibition study, chlorination and UV/chlorination were found to increase the toxicity of the HCTZ solution. This result indicated that even UV/chlorination showed higher effectiveness in removing HCTZ; however, it also has the potential to generate toxic by-products and effluent.

Occurrence and removal of microplastics in an advanced drinking water treatment plant (ADWTP)

Microplastics (MPs) have attracted worldwide attention as the emerging persistent pollutants. Since they have been detected in raw water and the treated water of drinking water treatment plants (DWTPs), there was an urgent need to explore the properties and fates of microplastics in DWTPs. The characteristics of the effluent MPs from each treatment unit in an advanced drinking water treatment plant (ADWTP) were studied, and the relationship between the variations of MPs and the removal performances of treatment processes was also explored. Overall, both the coagulation combined with sedimentation and the granular activated carbon (GAC) filtration performed well in removing microplastics. The former had a removal efficiency of about 40.5-54.5%, mainly for fibres' removal, and the presence of GAC filtration reduced the microplastic abundance by about 56.8-60.9%, mainly for small-sized MPs. It was worthy of attention that a larger amount of polyacrylamide (PAM) was detected in the effluent of the sedimentation compared to raw water, which was caused by the usage of coagulant containing PAM. Specially, the number of 1-5 μm MPs in the effluent of ozonation tank was increased by 2.8-16.0%, resulting in a negative removal efficiency in ozonation. The removals of microplastics were depended primarily on their physical properties (size and shape).

Chronic Toxicological Effects of Carbamazepine on Daphnia magna Straus: Effects on Reproduction Traits, Body Length, and Intrinsic Growth

In recent years, pharmaceuticals and personal care products (PPCPs) that remain in the environment have become increasingly important. Carbamazepine (CBZ) is a widely used antiepileptic drug that has a potential impact on the environment due to its Physico-chemical properties, which are rarely eliminated in conventional water treatment. Daphnia magna Straus (DMS) is a fundamental link of aquatic ecosystem chain. The influence of CBZ toxicity on DMS can effectively reflect the effects of CBZ toxicity on the aquatic environment. In this study, DMS was used as a subject to assess the chronic effects of CBZ exposure. It was found that after 21 days of CBZ exposure, the breeding frequency, the total number of eggs laid, body length, and intrinsic growth rate of DMS decreased with increasing CBZ concentrations. Maximum reductions of 69% in fecundity and 60% in fertility were observed at 0.5 mg/L CBZ, while a maximum reduction of 60% in body length was observed at 0.001 mg/L CBZ concentration. The integrated biomarker response version 2 (IBRv2) analysis suggests that with the increase in CBZ concentration, the overall negative effect of CBZ on DMS was enhanced.

Effect of alpha-hydroxy acids on transformation products formation and degradation mechanisms of carbamazepine by UV/H2O2 process

The role of dissolved organic matters (DOM) in the matrix of water on the degradation of refractory pharmaceutical has aroused broad concerns. However, The effect of alpha-hydroxy acids as vulnerable aliphatic acids in the water on the degradation of Carbamazepine (CBZ) has been lack of research. The decomposition kinetics and transformation products (TPs) of CBZ by UV/H2O2 process were studied in the existence of glycolic acid (GA) and lactic acid (LA) and the degradation pathways were proposed. Both GA and LA had significantly negative effects on the decomposition kinetics and mineralization of CBZ by UV/H₂O₂ process. The declination of steady-state OH concentration in the presence of GA and LA justified the negative effects. GA was demonstrated to be stronger at scavenging and competing OH with CBZ, compared with LA, with the rate constant of slightly less than the common OH scavenger methanol. One-step dosing mode of H₂O₂ was better than multi-step dosing mode for CBZ decomposition, especially in the presence of GA and LA. The identification of TP253a, TP253b, TP271a, TP271b, TP226, and TP180 in the absence and presence of GA and LA were performed by HPLC-MS/MS and two main degradation pathways were presented. Except for TP271a and TP271b, GA and LA retarded the abundance peaks of other four TPs, of which the formation kinetics rates and decay kinetics rates were negatively affected. Tailing peaks of all TPs caused by GA and LA inevitably resulted in the toxicity of the treated effluent of UV/H₂O₂ process even when CBZ was decomposed completely. Therefore, alpha-hydroxy acids play important roles in determining the fate and transformation of refractory pharmaceuticals in AOPs treatment.

Enzyme-Based Electrochemical Biosensors for Microfluidic Platforms to Detect Pharmaceutical Residues in Wastewater

Emerging water pollutants such as pharmaceutical contaminants are suspected to induce adverse effects to human health. These molecules became worrisome due to their increasingly high concentrations in surface waters. Despite this alarming situation, available data about actual concentrations in the environment is rather scarce, as it is not commonly monitored or regulated. This is aggravated even further by the absence of portable and reliable methods for their determination in the field. A promising way to tackle these issues is the use of enzyme-based and miniaturized biosensors for their electrochemical detection. Here, we present an overview of the latest developments in amperometric microfluidic biosensors that include, modeling and multiphysics simulation, design, manufacture, testing, and operation methods. Different types of biosensors are described, highlighting those based on oxidases/peroxidases and the integration with microfluidic platforms. Finally, issues regarding the stability of the biosensors and the enzyme molecules are discussed, as well as the most relevant approaches to address these obstacles.