Approaching the environmental problem of microplastics: Importance of WWTP treatments

Existence and fate of microplastics in terrestrial environment: A global fretfulness and abatement strategies

Widespread use of plastics in consumer products, packaging, cosmetics, and industrial and agricultural production has resulted in the ubiquitous occurrence of microplastics in terrestrial environment. Compared to the marine environment, only limited studies have investigated the microplastics pollution and associated risk in terrestrial environment. The present review summarizes the global distribution of microplastics in terrestrial environment, their transport pathways and fate, risk to ecosystem and human health, and abatement strategies. Small particle sizes (<500 μm); fragment, fiber, and film shapes; transparent and white color; polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) polymers were the major characteristics of the microplastics found in terrestrial environment. Microplastics in soils negatively affect soil organisms, while the impact of microplastics in terrestrial environment on human health is poorly understood, which needs to be explored further as there is clear evidence on their presence in human bodies. The removal of microplastics from soil environment is quite complex and costly, thus prevention of their releases is preferable. Among the existing abatement options, biodegradation, which harnesses bacterial strains to degrade microplastics through enzymatic hydrolysis, hold promise for terrestrial environment. Strengthening global cooperation, implementing timely policies on plastic use and recycle, and developing new technologies for control of microplastics are recommended to reduce the pollution in terrestrial environment. Global effort on reducing plastic wastes and enhancing their management is imperative, while substitution with biodegradable plastics could help minimize future accumulation of microplastics in terrestrial environment.

Unveiling the impacts of microplastic pollution on soil health: A comprehensive review

Soil contamination by microplastics (MPs) has emerged as a significant global concern. Although traditionally associated with crop production, contemporary understanding of soil health has expanded to include a broader range of factors, including animal safety, microbial diversity, ecological functions, and human health protection. This paradigm shifts underscores the imperative need for a comprehensive assessment of the effects of MPs on soil health. Through an investigation of various soil health indicators, this review endeavors to fill existing knowledge gaps, drawing insights from recent studies conducted between 2021 and 2024, to elucidate how MPs may disrupt soil ecosystems and compromise their crucial functions. This review provides a thorough analysis of the processes leading to MP contamination in soil environments and highlights film residues as major contributors to agricultural soils. MPs entering the soil detrimentally affect crop productivity by hindering growth and other physiological processes. Moreover, MPs hinder the survival, growth, and reproductive rates of the soil fauna, posing potential health risks. Additionally, a systematic evaluation of the impact of MPs on soil microbes and nutrient cycling highlights the diverse repercussions of MP contamination. Moreover, within soil-plant systems, MPs interact with other pollutants, resulting in combined pollution. For example, MPs contain oxygen-containing functional groups on their surfaces that form high-affinity hydrogen bonds with other pollutants, leading to prolonged persistence in the soil environment thereby increasing the risk to soil health. In conclusion, we succinctly summarize the current research challenges related to the mediating effects of MPs on soil health and suggest promising directions for future studies. Addressing these challenges and adopting interdisciplinary approaches will advance our understanding of the intricate interplay between MPs and soil ecosystems, thereby providing evidence-based strategies for mitigating their adverse effects.

Microalgae separation in MP-PVC contaminated wastewater using plant-based coagulant over different extraction methods in Bauru, Brazil

This study investigates the effectiveness of coagulation-flocculation and sedimentation (CFS) for separating microalgae, focusing on the use of various Moringa oleifera extracts as natural coagulants. We examined photobioreactor effluent (PBR) both with and without microplastic PVC (MP-PVC) contamination, referred to as PBR R2 and PBR R1, respectively. Utilising response surface methodology, we identified optimal conditions for the removal of microalgae and MP-PVC. Validation tests demonstrated that the aqueous extract of delipidated Moringa oleifera powder (AEDMOP) achieved high removal efficiencies, with coagulant dosages of 630 mg L-1 for PBR R1 and 625 mg L-1 for PBR R2. Both conditions showed microalgae removal efficiencies exceeding 83% for turbidity, colour, OD540 nm, OD680 nm, and OD750 nm, and 63% for OD254 nm. Interestingly, the optimised conditions for PBR R2 required slightly less coagulant, likely due to the additional particulate matter from MP-PVC. While extracellular polymeric substances (EPS) exhibited a marginal effect on flocculation, further investigation into their role in CFS is necessary. Our findings highlight the potential of AEDMOP for efficient microalgae separation, even in the presence of microplastics.

Microplastics in the urban water cycle: A critical analysis of issues and of possible (needed?) solutions

Microplastic (MP) contamination is a problem that affects even remote, scarcely populated regions of the world. This topic has recently been the subject of many published studies, however, these often adopt hyperbolic statements and do not actually provide definitive evidence that MPs are a cause of environmental risk in actual environmental conditions. New technologies to remove MPs from supply and waste water are being investigated, but they are able to intercept a minimal fraction of the MPs circulating in all environmental media. Recently, several pieces of legislation were introduced to reduce plastic production, use, and disposal, but it is not clear how such measures could achieve a significant environmental MP reduction. This paper addresses the MP issue within the urban water cycle, examining recent current literature on MP presence in drinking and waste water, and overviewing available recent treatment technologies for their removal. The ensuing discussion attempts to holistically assess the actual relevance of the issue in the light of the current scientific evidence.

A convenient strategy for mitigating microplastics in wastewater treatment using natural light and ZnO nanoparticles as photocatalysts: A mechanistic study

Polypropylene microplastics (PPMPs) are one of the major emerging contaminants in the ecosystem due to their frequent usage and improper disposal practices. These PPMPs enter ecosystems via wastewater effluent plants and cause severe environmental health issues. In addition, quantifying PPMPs smaller than 50 μm in wastewater plant extraction is very difficult. Thus, the current study was designed to mitigate the PPMPs using zinc oxide nanoparticles (ZnONPs) as a photocatalyst under sunlight. The photocatalytic reaction was examined using spectroscopic techniques and microscopic imaging. The findings indicated that the weight loss percentage of PPMPs increased, and a decrease in UV-Vis DRS peak intensities was observed. The spectroscopic results elucidated the formation of free radicals, which affect the PPMPs and lead to the formation of carbonyl, allylic, and unsaturated groups. Further, EDS reports clarified that there is increased oxygen content due to the photooxidation process and the disintegration of the polymer chain owing to decreased carbon levels. Overall, ZnO photocatalyst absorbs photons from the visible spectrum of sunlight and forms free radicals, which affect the PPMPs to initiate polymer deterioration. Also, the current study revealed the mechanistic pathway of PPMP degradation under the photocatalytic reaction as proposed in the results obtained above.

Microplastics-biofilm interactions in biofilm-based wastewater treatment processes: A review

Microplastics, pervasive contaminants from plastic, present significant challenges to wastewater treatment processes. This review critically examines the interactions between microplastics and biofilm-based treatment technologies, specifically focusing on the concepts of "biofilm on microplastics" and "microplastics in biofilm". It discusses the implications of these interactions in contaminant removal and process performance. Advanced characterization techniques, including morphological characterization, chemical composition analysis, and bio-information analysis, are assessed to elucidate the complex interplay between microplastics and biofilms within biofilters, biological aerated filters (BAFs), rotating biological contactors (RBCs), and moving bed biofilm reactors (MBBRs). This review synthesizes current research findings, highlighting that microplastics can either hinder or enhance the treatment processes, contingent on their concentration, physicochemical properties, and the specific biofilm technology employed. The insights gained from this review are essential for developing strategies to mitigate the adverse effects of microplastics and for optimizing the design and operation of wastewater treatment.

Microplastics in aquatic systems: An in-depth review of current and potential water treatment processes

Plastic products, despite their undeniable utility in modern life, pose significant environmental challenges, particularly when it comes to recycling. A crucial concern is the pervasive introduction of microplastics (MPs) into aquatic ecosystems, with deleterious effects on marine organisms. This review presents a detailed examination of the methodologies developed for MPs removal in water treatment systems. Initially, investigating the most common types of MPs in wastewater, subsequently presenting methodologies for their precise identification and quantification in aquatic environments. Instruments such as scanning electron microscopy, dynamic light scattering, Fourier transform infrared spectroscopy, Raman spectroscopy, surface-enhanced Raman spectroscopy, and Raman tweezers stand out as powerful tools for studying MPs. The discussion then transitions to the exploration of both existing and emergent techniques for MPs removal in wastewater treatment plants and drinking water treatment plants. This includes a description of the core mechanisms that drive these techniques, with an emphasis on the latest research developments in MPs degradation. Present MPs removal methodologies, ranging from physical separation to chemical and biological adsorption and degradation, offer varied advantages and constraints. Addressing the MPs contamination problem in its entirety remains a significant challenge. In conclusion, the review offers a succinct overview of each technique and forwards recommendations for future research, highlighting the pressing nature of this environmental dilemma.

Microplastics in wastewater and sludge from centralized and decentralized wastewater treatment plants: Effects of treatment systems and microplastic characteristics

Domestic wastewater treatment plants (WWTPs) play a vital role in limiting the release of microplastics (MP) into the environment. This study examined MP removal efficiency from five centralized and four decentralized domestic WWTPs in Bangkok, Thailand. MP concentrations in wastewater and sludge were comparable between centralized and decentralized WWTPs, despite these decentralized WWTPs serving smaller populations and having limited treatment capacity. The elimination of MPs ranged from 50 to 96.8% in centralized WWTPs and 14.2-53.6% in decentralized WWTPs. It is noted that the retained MPs concentrations in sludge ranged from 20,000 to 228,100 MP/kg dry weight. The prevalence of synthetic fibers and fragments could be attributed to their pathways from laundry or car tires, and the accidental release of a variety of plastic wastes ended up in investigated domestic WWTPs. Removal of MPs between the centralized and decentralized WWTPs was influenced by several impact factors including initial MP concentrations, longer retention times, MP fragmentation, and variations of MP concentrations in sludge leading to different activated sludge process configurations. Sewage sludge has become a primary location for the accumulation of incoming microplastics in WWTPs. The MPs entering and leaving each unit process were varied due to the unique characteristics of MPs, and their different treatment efficiencies. While the extended hydraulic retention period in decentralized WWTPs decreased the MP removal efficacy, the centralized WWTP with the two-stage activated sludge process achieved the highest MP removal efficiency.

A review of microplastics on anammox: Influences and mechanisms

Microplastics (MPs) are prevalent in diverse environmental settings, posing a threat to plants and animals in the water and soil and even human health, and eventually converged in wastewater treatment plants (WWTPs), threatening the stable operation of anaerobic ammonium oxidation (anammox). Consequently, a comprehensive summary of their impacts on anammox and the underlying mechanisms must be provided. This article reviews the sources and removal efficiency of MPs in WWTPs, as well as the influencing factors and mechanisms on anammox systems. Numerous studies have demonstrated that MPs in the environment can enter WWTPs via domestic wastewater, rainwater, and industrial wastewater discharges. More than 90% of these MPs are found to accumulate in the sludge following their passage through the treatment units of the WWTPs, affecting the characteristics of the sludge and the efficiency of the microorganisms treating the wastewater. The key parameters of MPs, encompassing concentration, particle size, and type, exert a notable influence on the nitrogen removal efficiency, physicochemical characteristics of sludge, and microbial community structure in anammox systems. It is noteworthy that extracellular polymer secretion (EPS) and reactive oxygen stress (ROS) are important impact mechanisms by which MPs exposure affects anammox systems. In addition, the influence of MPs exposure on the microbial community structure of anammox cells represents a crucial mechanism that demands attention. Future research endeavors will delve into additional crucial parameters of MPs, such as shape and aging, to investigate their effects and mechanisms on anammox. Furthermore, the effective mitigation strategies will also be developed. The paper provides a fresh insight to reveal the influences of MPs exposure on the anammox process and its influence mechanisms, and lays the groundwork for further exploration into the influence of MPs on anammox and potential mitigation strategies.

Investigation of microplastics in urban rivers of Eastern China in summer: abundance, characteristics and ecological risk assessment

Microplastics (MPs) are increasingly becoming recognized as worldwide environmental contaminants, exerting a substantial impact on the safety of city rivers. This study explored the abundance and characteristics of MPs in summer 2023, including June and August, representing plum rain and typhoon rain seasons. The Qinhuai River exhibits more spatial fluctuations in six sampling sites with average concentrations of 470 ± 119.56 items per L, and the abundance increases with the water flows in the river. Downstream had the highest MP abundance of 484 ± 121.34 items per L, which were positive with the concentration of suspended solids (SS). Transparent and green MPs were more even in the sampling sites, and the shapes of fragments were predominant in the summer. Interestingly, the proportion of fiber and small-sized (38-75 μm) microplastics was predominant in the plum rain seasons, while the percentage of large-sized (270-5000 μm) and polymers of PE occurred in the typhoon rain seasons. The index of hazard scores of plastic polymers (H) revealed that the studied river had a severe pollution level (IV), which was highly influenced by PVC and PC. Besides, the pollution load index PLI value of different rain seasons was slightly polluted (I), while the PLI in autumn rain seasons was relatively higher than that in other seasons due to the higher variance of MPs. Therefore, the ecological risk of microplastics of PVC and PC in the Qinhuai River during varying seasons should be seriously considered. Our research is expected to provide valuable assistance in improving the management of urban rivers.

Microplastics removal in wastewater treatment plants: A review of the different approaches to limit their release in the environment

In last 10 years, the interest about the presence of microplastics (MPs) in the environment has strongly grown. Wastewaters function as a carrier for MPs contamination from source to the aquatic environment, so the knowledge of the fate of this emerging contaminant in wastewater treatment plants (WWTPs) is a priority. This work aims to review the presence of MPs in the influent wastewater (WW) and the effectiveness of the treatments of conventional WWTPs. Moreover, the negative impacts of MPs on the management of the processes have been also discussed. The work also focuses on the possible approaches to tackle MPs contamination enhancing the effectiveness of the WWTPs. Based on literature results, despite WWTPs are not designed for MPs removal from WW, they can effectively remove the MPs (up to 99 % in some references). Nevertheless, they normally act as "hotspots" of MPs contamination considering the remaining concentration of MPs in WWTPs' effluents can be several orders of magnitude higher than receiving waters. Moreover, MPs removed from WW are concentrated in sewage sludge (potentially >65 % of MPs entering the WWTP) posing a concern in case of the potential reuse as a soil improver. This work aims to present a paradigm shift intending WWTPs as key barriers for environmental protection. Approaches for increasing effectiveness against MPs have been discussed in order to define the optimal point(s) of the WWTP in which these technologies should be located. The need of a future legislation about MPs in water and sludge is discussed.

The effect of water ozonation in the presence of microplastics on water quality and microplastics degradation

The occurrence of microplastics in water treatment plants poses a concern for the quality of treated water. When microplastics pass through water treatment plants, they can be oxidized, changing their surface characteristics and the quality of the treated water. This work aimed to investigate the impact of ozone and the association of ozone and hydrogen peroxide on five different microplastic particles that are commonly detected in water samples. The changes in the concentration of total organic carbon and the change in the pH of the water, the leaching of phthalic acid esters, as well as the changes in size and chemical changes in the structure of the tested microplastics were evaluated. The influence of ozonation time, water pH, and type of microplastics, as well as the influence of the addition of hydrogen peroxide, was analyzed. The effect of ozonation was an increase in DOC values ranging from 0.8 to 28 mg/L. The eluting substances included phthalic acid esters, plasticizers with a proven negative impact on organisms. The percentage loss of the surface area of the microplastic was in the range of 1.3 to 26.7 %. PE was more susceptible to degradation. LDIR analyzes were carried out to investigate the effect of O3 and O3/H2O2 treatments on the surface of MPs. This study demonstrated that MPs could change their physical and chemical characteristics if they are subjected to oxidation processes used in water treatment plants. The parameters of purified water change to unfavorable ones due to the leaching of additives. Although much research has been conducted on the occurrence of microplastics in treated water, awareness needs to be raised about the interactions between plastic particles and water treatment technology processes.

Microplastic pollution responses to spatial and seasonal variations and water level management in a polymictic tropical reservoir (São Paulo, Brazil)

We assessed microplastic (μP) pollution in water and sediment samples during the dry and rainy season (October/2018 and March/2019, respectively) from the Guarapiranga Reservoir in the Metropolitan Region of São Paulo, Brazil, which provides drinking water for up to 5.2 million people. The concentration of mPs varied spatially and seasonally, with the higher concentrations observed near the urbanized areas and during the dry season. Water column concentrations ranged from 150 to 3100 particles/m3 and 0.07-25.05 mm3 plastic/m3 water during the dry season, and 70-7900 particles/m3 and 0.06-4.57 mm3 plastic/m3 water during the rainy season. Sediment samples were collected only during the rainy season, with concentrations ranging from 210 to 22,999 particles/kg dry weight and 0.15-111.46 mm3/kg dry weight. The particle size distribution exhibited seasonal variation, with μPs >1 mm predominating during the dry season, constituting 60-75% of all particles. In terms of quantity, fibers accounted for the majority of microplastics, comprising 55-95% during the dry season and 70-92% during the rainy season. However, when considering particle volume, irregular particles dominated in some samples, accounting for up to 95% of the total amount. The predominant colors of microplastics were white/crystal, black, and blue, with the main compositions identified as polypropylene (PP) and polyethylene terephthalate (PET), suggesting the influence of untreated domestic sewage discharge. Additionally, some additives were detected, including the pigments Fast RED ITR and phthalocyanine blue. The management of reservoir water levels appears to influence the quantity of μPs in the water column. As the water level increases up to 90% of the reservoir capacity during the rainy season, the amount of μPs in the water decreases, despite the higher influx of particles resulting from surface runoff caused by rainy conditions. This suggests a "dilution" effect combined to the polymictic mixing hydrodynamics. Our results may contribute to the creation and improvement of monitoring programs regarding mP pollution and to the adoption of specific public policies, which are still lacking in legislation.

Microplastics and Endocrine Disruptors in Typical Wastewater Treatment Plants in Megacity Shanghai

The fast development of China's urbanization has led to a notable release of emerging pollutants, including microplastics (MPs) and endocrine disruptors (EDCs). Generally, these pollutants enter the coastal environment through the discharge of wastewater treatment plants (WWTPs) and finally threaten the organisms in the receiving waterbody. The study investigated the environmental behavior of MPs and EDCs in two typical WWTPs in one of the megacities in China, Shanghai. The abundance of MPs in the influent ranged from 321 to 976 items/L. Four shapes (films, fragments, fibers, and microbead) were found, while fibers and films dominated. Transparent (31-63%) and white (20-47%) MPs were more frequently observed, while polyethylene terephthalate, cellulose, and cellophane were the main polymetric materials. The size of the MPs fell between 15.8 μm and 2220 μm, and the smaller one (<500 μm) dominated. The removal efficiencies of the two WWTPs for MPs ranged from 64% to 92%, and both WWTPs performed better for large pieces of MPs (>500 μm). For EDCs, total concentrations in the influent were detected, ranging from 113 to 2780 ng/L. Two groups, including phenolic estrogens (PEs) and steroid estrogens (SEs), were detected, and PEs, especially bisphenol A (BPA), were the predominant individuals among the studied EDCs. Specifically, PEs ranged from 82.8 to 2637 ng/L, while SEs ranged from 27.3 to 143 ng/L. The removal efficiencies of the WWTPs for EDCs varied (82.8-100%) as well, possibly due to the different treatment compartments and contamination load in the influent. Seasonal variations for both MPs and EDCs were observed. Specifically, concentrations of MPs and EDCs in WWTPs influent were higher in the wet season, as well as the removal efficiency. Furthermore, there was a correlation observed between the concentrations of MPs and EDCs, suggesting that MPs and EDCs may originate from the same source and that EDCs released by MPs cannot be ignored during treatment. Finally, the study evaluated the environmental risk of the effluents. MPs led to a minor risk (Level I), while EDCs might lead to an adverse impact on algae (RQs = 0.0014-0.024) and fish (RQs = 3.4-30.2). In summary, WWTPs received considerable amounts of MPs and EDCs. Although the WWTPs removed the contaminants efficiently, the environmental risk of the effluent needs to be noted.

Hidden threats in the plastisphere: Carbapenemase-producing Enterobacterales colonizing microplastics in river water

Carbapenem resistance poses a significant burden on healthcare systems worldwide. Microplastics (MPs) have emerged as potential contributors to antibiotic resistance spread in the environment. However, the link between MPs and carbapenem resistance remains unexplored. We investigated the prevalence of carbapenem-resistant bacteria colonizing MPs placed in a river. Three replicates of a mixture of polypropylene (PP), polyethylene (PE) and polyethylene terephthalate (PET) and of PET alone were placed both upstream and downstream a wastewater treatment plant (WWTP) discharge. Carbapenem-resistant Enterobacterales (CRE) were further characterized by phenotypic tests and whole-genome sequencing. The abundance of carbapenem-resistant bacteria on MPs increased significantly downstream the WWTP. Their prevalence was higher in the MPs mixture compared to PET alone. CRE strains colonizing MPs included Klebsiella pneumoniae (n = 3), Klebsiella quasipneumoniae (n = 3), Raoultella ornithinolytica (n = 2), Enterobacter kobei (n = 1) and Citrobacter freundii (n = 1), most (n = 8) recovered after the WWTP discharge. All strains exhibited at least one of the tested virulence traits (biofilm formation at 37 °C, haemolytic activity and siderophore production), were multi-drug resistant and carried carbapenemase-encoding genes [blaKPC-3 (n = 5), blaGES-5 (n = 2) or blaKPC-3 + blaGES-5 (n = 3)]. Uncommon phenotypes of resistance to imipenem/relebactam (n = 3) and ceftazidime/avibactam (n = 2) were observed. Two blaKPC-3-positive K. pneumoniae successfully transfer this gene trough conjugation. Genome analysis predicted all strains as human pathogens. The blaKPC-3 was associated with the Tn4401d transposon on a pBK30683-like plasmid in most of the isolates (n = 7). The blaGES-5 was mostly linked to class 3 integrons. A K. pneumoniae strain belonging to the outbreak-causing high-risk clone ST15 carried both blaKPC-3 and blaCTX-M-15. Two K. quasipneumoniae isolates carried the plasmid-mediated colistin resistance gene mcr-9. Our results underscore the role of MPs as vectors for CRE dissemination, particularly following WWTPs discharges. MPs may act as carriers, facilitating the dissemination of carbapenemase-encoding genes and potentially contributing to increased CRE incidence in the environment.

Abundance and risk assessment of microplastics in water, sediment, and aquatic insects of the Nile River

Microplastics (MPs) are a serious threat in freshwater environments. The ecological risk and abundance level of MPs in abiotic and biotic compartments of the Nile River haven't been systematically reported. Thus, these issues were highlighted in the present study during different seasons of the sampling year. The results showed that MP concentrations in the river ranged from 2.24 ± 0.6 to 3.76 ± 1.1 particles/L, 298 ± 63 to 520 ± 80 particles/kg dry weight, and 0.081 ± 0.051 to 4.95 ± 2.6 particles/individual in surface water, sediment, and different species of aquatic insects, respectively. All the extracted MPs are colored blue, red, and black. Fiber-shaped polyesters (<500-1500 μm) were the most common MPs in all the river compartments. MPs' dominance was observed during the summer in comparison with that in the other seasons. Environmental risk indicators indicate the high ecological risk of MPs, which are widely distributed in the Nile River. In conclusion, MP consumption by aquatic insects may not only be related to levels of environmental contamination, since other variables, such as taxon size, weight, and particular feeding behavior, may also be significant. Additionally, the presence of MPs in insects (at lower trophic levels) creates the potential for predation-based inter-trophic level transmission. Thus, higher trophic-level investigations of various feeding groups should be carried out to identify any possible harm that MPs cause to various aquatic organisms.

Exploring biodegradative efficiency: a systematic review on the main microplastic-degrading bacteria

Introduction

Microplastics (MPs) are widely distributed in the environment, causing damage to biota and human health. Due to their physicochemical characteristics, they become resistant particles to environmental degradation, leading to their accumulation in large quantities in the terrestrial ecosystem. Thus, there is an urgent need for measures to mitigate such pollution, with biological degradation being a viable alternative, where bacteria play a crucial role, demonstrating high efficiency in degrading various types of MPs. Therefore, the study aimed to identify bacteria with the potential for MP biodegradation and the enzymes produced during the process.

Methods

The methodology used followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) protocol.

Results and Discussion

The research yielded 68 eligible studies, highlighting bacteria from the genera Bacillus, Pseudomonas, Stenotrophomonas, and Rhodococcus as the main organisms involved in MP biodegradation. Additionally, enzymes such as hydrolases and alkane hydroxylases were emphasized for their involvement in this process. Thus, the potential of bacterial biodegradation is emphasized as a promising pathway to mitigate the environmental impact of MPs, highlighting the relevance of identifying bacteria with biotechnological potential for large-scale applications in reducing MP pollution.

Removal of microplastics in food packaging industry wastewaters with electrocoagulation process: Optimization by Box-Behnken design

Currently, the vast majority of studies on microplastics (MPs) focus on determining the quantity and presence of these particles in various receiving environments and their treatment in domestic wastewater treatment plants. However, little research has been conducted on the treatment of microplastics in industrial effluent. Therefore, in this study, effluent samples from the cooling water tank of a local food packaging manufacturing company were analyzed to determine the presence and quantity of MPs for the first time. MPs removal from industrial wastewater using the electrocoagulation (EC) method was optimized using the Box Behnken Design (BBD). A second-order model was developed to estimate the microplastic removal efficiency, and the R2, adjusted R2, and predicted R2 of the model were 0.9994, 0.9985, and 0.9962, respectively. The optimal reaction parameters resulting in the maximum removal rate of microplastics (99 %) were determined to be pH 6.74, current density of 3.16 mA cm-2, and duration of 13.58 min. The cost of microplastic treatment per m3 of wastewater in the EC system, operated under optimal conditions, was calculated as 0.125 $. In this study, it was concluded that the EC process is a highly efficient technique for the removal of MPs from industrial wastewater at a low cost. Determining the most favorable conditions with BBD for the EC process at the feasibility stage of treatment plants will provide economic benefits and increase treatment efficiency during the installation of large-scale plants.

Spatial distribution and vertical characteristics of microplastics in the urban river: The case of Qinhuai River in Nanjing, China

Microplastics (MPs) are emerging as global environmental pollutants, significantly influencing the safety of city rivers. This study investigated six sampling sites in the Qinhuai River of Nanjing, which explored the distribution and characteristics of MPs and the microbial structure in 2023. The studied river contained various levels of MPs with average concentrations of 667.68 items/L, whose abundance firstly decreased midstream and then increased downstream. The MPs abundance upstream was higher in surface water column, microplastics midstream and downstream accumulated more in deep water column. Black and blue are prevalent in the color distribution, while the polymers of PC, PP and PS changed with increasing depth, with a proportion of 74 % ∼ 97 % in the dominant shapes of granules. Furthermore, the water with higher MPs may stimulate the growth of MPs-related bacteria in sediments, including the genus of Pseudoxanthomonas and Dechloromonas. Our research will provide constructive support for enhancing urban river management strategies.

Microplastic removal and management strategies for wastewater treatment plants

Discharging microplastics into the environment with treated wastewater is becoming a major concern around the world. Wastewater treatment plants (WWTPs) release microplastics into terrestrial and aquatic habitats, mostly from textile, laundry, and cosmetic industries. Despite extensive research on microplastics in the environment, their removal, and WWTP management strategies, highlighting their environmental effects, little is known about microplastics' fate and behaviour during various treatment processes. Microplastics interact with treatment technologies differently due to their diverse physical and chemical characteristics, resulting in varying removal efficiency. Microplastics removed from WWTPs may accumulate in soil and harm terrestrial ecosystems. Few studies have examined the cost, energy use, and trade-offs of large-scale implementation of modern treatment methods for the removal of microplastics. To safeguard aquatic and terrestrial habitats from microplastics' contamination, focused and efficient management techniques must bridge these knowledge gaps. This review summarizes microplastic detection, collection, removal and management strategies. A compilation of treatment process studies on microplastics' removal efficiency and their destiny and transit paths shows recent improvement. Bioremediation, membrane bioreactor (MBR), electrocoagulation, sol-gel technique, flotation, enhanced filtering, and AOPs are evaluated for microplastic removal. The fate and behaviour of microplastics in WWTPs suggest they may be secondary suppliers of microplastics to receiving ecosystems. Innovative microplastic removal strategies and technologies such as nanoparticles, microorganism-based remediation, and tertiary treatment raise issues. These new WWTP technologies are examined for feasibility, limitations, and implementation issues. Pretreatment modifies microplastic size, adsorption potential, and surface morphology to remove microplastics from WWTPs. Membrane bioreactors (MBR) can remove 99.9% of microplastics more efficiently than other approaches. MBR systems require membrane cleaning and fouling control, which raises operational and capital costs. To reduce MPs, plastic alternatives and strict controls, including microplastic waste transformation, should be prioritized. Microplastics must be controlled through monitoring policy execution and awareness.

Forecasting global plastic production and microplastic emission using advanced optimised discrete grey model

Plastic pollution has become a prominent and pressing environmental concern within the realm of pollution. In recent times, microplastics have entered our ecosystem, especially in freshwater. In the contemporary global landscape, there exists a mounting apprehension surrounding the manifold environmental and public health issues that have emerged as a result of the substantial accumulation of microplastics. The objective of the current study is to employ an enhanced grey prediction model in order to forecast global plastic production and microplastic emissions. This study compared the accuracy level of the four grey prediction models, namely, EGM (1,1, α, θ), DGM (1,1), EGM (1,1), and DGM (1,1, α) models, to evaluate the accuracy levels. As per the estimation of the study, DGM (1,1, α) was found to be more suitable with higher accuracy levels to predict microplastic emission. The EGM (1,1, α, θ) model has slightly better accuracy than the DGM (1,1, α) model in predicting global plastic production. Various accuracy measurement tools (MAPE and RMSE) were used to determine the model's efficiency. There has been a gradual growth in both plastic production and microplastic emission. The current study using the DGM (1,1, α) model predicted that microplastic emission would be 1,084,018 by 2030. The present study aims to provide valuable insights for policymakers in formulating effective strategies to address the complex issues arising from the release of microplastics into the environment and the continuous production of plastic materials.

A review on cutinases enzyme in degradation of microplastics

From the surface of the earth to the depths of the ocean, microplastics are a hazard for both aquatic and terrestrial habitats. Due to their small size and vast expanse, they can further integrate into living things. The fate of microplastics in the environment depends upon the biotic components such as microorganisms which have potential enzymes to degrade the microplastics. As a result, scientists are interested in using microorganisms like bacteria, fungi, and others to remediate microplastic. These microorganisms release the cutinase enzyme, which is associated with the enzymatic breakdown of microplastics and plastic films. Yet, numerous varieties of microplastics exist in the environment and their contaminants act as a significant challenge in degrading microplastics. The review discusses the cutinases enzyme degradation strategies and potential answers to deal with existing and newly generated microplastic waste - polyethylene (PE), polyethylene terephthalate (PET), poly-ε-caprolactone (PCL), polyurethanes (PU), and polybutylene succinate (PBS), along with their degradation pathways. The potential of cutinase enzymes from various microorganisms can effectively act to remediate the global problem of microplastic pollution.

Effects of microplastics on the properties of different types of sewage sludge and strategies to overcome the inhibition: A review

Microplastics have been identified as an emerging pollutant. When microplastics enter wastewater treatment plants, the plant traps most of the microplastics in the sludge during sewage treatment. Therefore, the effects of microplastics on sludge removal performance, and on the physical and chemical properties and microbial communities in sludge, have attracted extensive attention. This review mainly describes the presence of microplastics in wastewater treatment plants, and the effects of microplastics on the decontamination efficiency and physicochemical properties of activated sludge, aerobic granular sludge, anaerobic granular sludge and anaerobic ammonium oxidation sludge. Further, the review summarizes the effects of microplastics on microbial activity and microbial community dynamics in various sludges in terms of type, concentration, and contact time. The mechanisms used to strengthen the reduction of microplastics, such as biochar and hydrochar, are also discussed. This review summarizes the mechanism by which microplastics influence the performance of different types of sludge, and proposes effective strategies to mitigate the inhibitive effect of microplastics on sludge and discusses removal technologies of microplastics in sewage. Biochar and hydrochar are one of the effective measures to overcome the inhibition of microplastics on sludge. Meanwhile, constructed wetland may be one of the important choice for the future removal of microplastics from sewage. The goal is to provide theoretical support and insights for ensuring the stable operation of wastewater treatment plants and reducing the impact of microplastics on the environment.

A standard analytical approach and establishing criteria for microplastic concentrations in wastewater, drinking water and tap water

The ubiquitous presence of microplastics (MPs) in natural water bodies reflects the global issue regarding these micropollutants. The main problem of MPs lies on the difficulty of removing these particles from water during wastewater and drinking water treatments. The release of MPs to the environment in treated wastewater contributed to the dispersion of these micropollutants, which enhances the harmful effect of MPs on fauna and flora. In addition, their presence in tap water entails a potential risk to human health since MPs can be directly consumed. The first step is being able to quantify and characterise these microparticles accurately. In this work, a comprehensive analysis on the presence of MPs in wastewater, drinking water and tap water has been conducted with emphasis on sampling methods, pre-treatment, MP size and analytical methods. Based on literature data, a standard experimental procedure has been proposed with the objective of recommending a methodology that allows the homogenisation of MP analysis in water samples. Finally, reported MP concentrations for influents and effluents of drinking and wastewater treatment plants and tap water have been analysed, in terms of abundance, ranges and average values, and a tentative classification of different waters based on their MP concentrations is proposed.

Sludge drying and dewatering processes influence the abundance and characteristics of microplastics in wastewater treatment plants

Wastewater treatment plants (WWTPs) have been identified as high-load receptors of microplastics (MPs) from different sources. However, the influence of specific treatment stanges requires further research. The main objective of this research was to evaluate the abundance and chemical characteristics of MPs in the sludge of two major wastewater treatment plants in the Agadir metropolis (Central Atlantic of Morocco). The Aourir plant receives urban influents and the inputs of the M'zar facility were urban and industrial. Samples were collected from the sludge matrices after primary settling, clarifying, dewatering, and drying systems. In addition, the effect of seasonality on MP load was assessed. The results showed that a higher abundance was noticed in raw sludge than in dewatered one in Aourir WWTP, while in M'zar WWTP, a very low decrease is noticed in dried sludge compared to raw sludge. The concentration of MPs in the summer season was significantly higher compared to other seasons for Aourir WWTP, while the winter season was higher for M'zar WWTP. Moreover, the most abundant shapes were fibers and the fraction 100-500 μm was the most preponderant. Eleven polymers were identified by ATR-FTIR, being polyester, polyethylene, polypropylene, and polystyrene the most abundant ones. Scanning Electron Microscopy coupled with Energy Dispersive X-ray revealed the visible degradation and fragmentation of MPs from sewage sludge and their ability to adsorb inorganic elements. It was estimated that between 2.2 × 107 and 7.4 × 108 MPs were evacuated with the sludge per day. The obtained findings confirmed that WWTP sludge acts as a vector of MPs with a high level of hazard to various matrices, such as landfills, agricultural soils, and groundwater. Overall, consideration must be given to the regulatory system managing the fate of sewage sludge to mitigate the collateral effects and provide solutions.

A holistic approach on the impact of microplastic discharge from WWTPs to the neighboring environment in Southeast Spain

The present study investigated the release of microplastics (MPs) from wastewater treatment plants (WWTPs) to the neighboring environment, including marine and coastal sediments, and fish. Here, we comprehensively investigated MP abundance in 34 samples of marine sediment, corresponding to 5,530.5 g of sediment (d.w.) collected at -8.0 m, -12.5 m, and -24.0 m, 69 samples of coastal sediment, accounting for 13,617.4 g (d.w.) from 17 different beaches from Mar Menor, and stomach and intestine of 17 fish samples of Sparus aurata, in the vicinity of Cartagena, a port city in Southeast Spain. The results showed that MPs were detected in all marine sediment samples, with an average abundance of 19.4 ± 2.4 items/kg (d.w.), in coastal sediments, with an average abundance of 52.5 ± 5.3 items/kg (d.w.), and fish samples, with an average of 8.2 ± 1.4 items per individual. The contribution of MPs from WWTPs to marine sediments is expected to be slow, as effluents were mostly dominated by fiber and film shapes, and by polymers less dense than seawater. There were no significant variations in the MP abundance of marine sediments after the atmospheric phenomenon named DANA, although a significant smaller MP size was reported, indicating a high mobility for tiny sizes. The same results were revealed for coastal sediment, although variations after DANA were statistically significant. Coastal sediment samples closer to WWTPs and agricultural fields with plastic mulching displayed higher MP concentrations, and an increase in the removal rate of MPs from WWTP effluents was negatively correlated with a decrease in MPs from fish collected. This study highlights the importance of sewage treatment plants in transporting MPs to the aquatic and terrestrial surrounding environment, which warrants further research on human health risks associated to MP pollution.

Tracing the fate of microplastic in wastewater treatment plant: A multi-stage analysis of treatment units and sludge

Microplastic (MP) pollution is ubiquitous in the environment presenting a global problem for both scientists and the general public. One of the major pathways of MPs entering the natural environment is through wastewater treatment plants (WWTPs). Once MPs reach the natural environment, they are posing threat to aquatic ecosystems and public health. The aim of this study is to investigate the concentration, morphology, and composition of MPs in different treatment units of a WWTP. Sampling included different points across WWTP in the water and sludge lines. Pre-treatment of the samples consists of advanced Fenton oxidation, and alkaline and enzymatic digestion followed by density separation. Once the particles were isolated, their morphology and size were studied using a stereoscopic and optical microscope followed by final confirmation with ATR-FTIR and micro-FTIR spectroscopy. Microplastic particle concentrations exhibit significant reductions as water undergoes treatment in the WWTP. For summer sampling, concentrations decreased from 351 MP/L (influent) to 35 MP/L (primary clarifier), 32 MP/L (biological reactor), and 13 MP/L (2.3 MP/L) (secondary clarifier). Similarly, winter sampling showed reductions from 403 MP/L (influent) to 159 MP/L (primary clarifier), 178 MP/L (biological reactor), and 26 MP/L (5.6 MP/L) (secondary clarifier). Removal efficiency of WWTP is high and exceeds 96%. The most abundant morphology is fibers followed by fragments and films. Polymers such as PE, synthetic cellulose, PP, PVC, PE-PP, PEEA, PA, acrylamide, and PES are widely detected in different units of WWTP. The number of MPs that are avoided from being emitted into the environment through direct water discharge was estimated to be 9.1 × 1012 MP/year. Removed MPs tend to accumulate in the sludge that is used for agricultural purposes although it should be managed as waste properly, avoiding the transition of MPs pollutants to terrestrial ecosystems adding to the number of MPs that will inevitably end up in receiving water bodies through direct WWTP effluent discharge that was set in 5.1 × 1010 MP/year in the studied WWTP.

Characteristics and seasonal variation of microplastics in the wastewater treatment plant: The case of Bursa deep sea discharge

Microplastics (MPs) are an emerging pollutant that can be detected in all ecosystems, especially aquatic ecosystems. Wastewater treatment plants (WWTPs) are important point sources of MP release into the sea. In this study, the characteristics of MPs in wastewater and sludge samples taken from different units of WWTP in Bursa-Gemlik district for 12 months were investigated. Wastewater and sludge samples collected from 7 different points were classified as size, shape, color, and counted. The amount of MP in the influent and effluent of the WWTP, respectively; 107.1 ± 40.2 MP/L and 4.1 ± 1.1 MP/L. Although the MP removal efficiency of the WWTP is 96.17 %, approximately 74,825,000 MP is discharged into the Marmara Sea every day. The amount of MP in the sludge is 14.3 ± 7.1 MP/g. The amount of MP accumulated in 22tons of waste sludge formed daily in WWTP was calculated as 314,600,000 MP, and the annual accumulated amount was calculated as approximately 1.15 × 1011 MP. The MPs in the WWTP were mainly 1-0.5 mm in size. Fibers were the dominant MP shape in both the wastewater and sludge samples. Black and transparent were the dominant MP colors. Seven different polymer types of MPs were detected, which were mainly types of polyethylene, polypropylene, and polyethylene terephthalate. Despite the high removal efficiency in the investigated WWTP, it has been shown that it acts as an important source of MPs to the sea ecosystem due to the high discharge rates.

Microplastics in Malaysia's Aquatic Environment: Current Overview and Future Perspectives

Microplastic pollution has adversely affected the aquatic ecosystem, living creatures, and human health. Several studies in Malaysia have provided baseline information on the existence of microplastics in surface water, ingestion by marine life and sediment. Also, humans are exposed to microplastic due to consumption of contaminated abiotic and biotic products, such as processed seafood. Nonetheless, knowledge is still scarce among Malaysian on the potential remediation and pollution management of microplastics, which poses a significant challenge to preserve a good environmental status. Green technologies also other alternative to mitigate the contamination of microplastics for sustainable future. Hence, this review aims to provide an overview of microplastic's occurrence, fate, and implications in Malaysia's aquatic environment. Detection of microplastics from the water surface, ingestion by aquatics, and sediment samples are highlighted. Available different treatment processes toward microplastic remediation are also discussed. Additionally, the potential challenges, current perspective for plastic management in Malaysia, as well as green strategies for reducing microplastic contamination are also put forward. The goal of this work is to improve the understanding of the seriousness of microplastic contamination in aquatic environments, thus encouraging key concerns that need to be investigated further.

Efficiency of lagoon-based municipal wastewater treatment in removing microplastics

Municipal wastewater treatment plants act as a sink, but also are a source of microplastics in the environment. A conventional wastewater lagoon system and an activated sludge (AS)-lagoon system in Victoria (Australia) were investigated through a two-year sampling program to understand the fate and transport of MP in such treatment processes. The abundance (>25 μm) and characteristics (size, shape, and colour) of the microplastics present in the various wastewater streams were determined. The mean values of MP in the influent of the two plants were 55.3 ± 38.4 and 42.5 ± 20.1 MP/L, respectively. The dominant MP size of influent and final effluent was <500 μm, with 25-200 μm accounting for >65 % of the total MP; synthetic fibres were the dominant MP in all wastewater streams. Influent MP concentration was significantly higher in summer than in other seasons for both systems, which was related to the lower plant inflow due to less stormwater entering the sewer during summer. The promising MP removal capability of the lagoon system (97 %) was attributed to its lengthy wastewater detention time (total HRT >250 days, including the storage lagoons) that would allow effective separation of MP from the water column via various physical and biological pathways. For the AS-lagoon system, the high MP reduction efficiency (98.4 %) was attributed to the post-secondary treatment of the wastewater with the lagoon system, in which MP was further removed during the month-long detention in the lagoons. The results indicated the potential of such low-energy and low-cost wastewater treatment systems for MP control.

Microplastics in aquatic environments: A comprehensive review of toxicity, removal, and remediation strategies

The occurrence of microplastics (MPs) in aquatic environments has been a global concern because they are toxic and persistent and may serve as a vector for many legacies and emerging pollutants. MPs are discharged to aquatic environments from different sources, especially from wastewater plants (WWPs), causing severe impacts on aquatic organisms. This study mainly aims to review the Toxicity of MPs along with plastic additives in aquatic organisms at various trophic compartments and available remediation methods/strategies for MPs in aquatic environments. Occurrences of oxidative stress, neurotoxicity, and alterations in enzyme activity, growth, and feeding performance were identical in fish due to MPs toxicity. On the other hand, growth inhibition and ROS formation were observed in most of the microalgae species. In zooplankton, potential impacts were acceleration of premature molting, growth retardation, mortality increase, feeding behaviour, lipid accumulation, and decreased reproduction activity. MPs togather with additive contaminants could also exert some toxicological impacts on polychaete, including neurotoxicity, destabilization of the cytoskeleton, reduced feeding rate, growth, survivability and burrowing ability, weight loss, and high rate of mRNA transcription. Among different chemical and biological treatments for MPs, high removal rates have been reported for coagulation and filtration (>86.5 %), electrocoagulation (>90 %), advanced oxidation process (AOPs) (30 % to 95 %), primary sedimentation/Grit chamber (16.5 % to 58.84 %), adsorption removal technique (>95 %), magnetic filtration (78 % to 93 %), oil film extraction (>95 %), and density separation (95 % to 100 %). However, desirable extraction methods are required for large-scale research in MPs removal from aquatic environments.

Microplastics accumulate priority antibiotic-resistant pathogens: Evidence from the riverine plastisphere

Microplastics (MPs) might accumulate and transport antibiotic-resistant bacteria (ARB) in aquatic systems. We determined the abundance and diversity of culturable ciprofloxacin- and cefotaxime-resistant bacteria in biofilms covering MPs placed in river water, and characterized priority pathogens from these biofilms. Our results showed that the abundance of ARB colonizing MPs tends to be higher compared to sand particles. Also, higher numbers were cultivated from a mixture of polypropylene (PP), polyethylene (PE) and polyethylene terephthalate (PET), compared to PP and PET alone. Aeromonas and Pseudomonas isolates were the most frequently retrieved from MPs placed before a WWTP discharge while Enterobacteriaceae dominated the culturable plastisphere 200 m after the WWTP discharge. Ciprofloxacin- and/or cefotaxime-resistant Enterobacteriaceae (n = 54 unique isolates) were identified as Escherichia coli (n = 37), Klebsiella pneumoniae (n = 3), Citrobacter spp. (n = 9), Enterobacter spp. (n = 4) and Shigella sp. (n = 1). All isolates presented at least one of the virulence features tested (i.e. biofilm formation, haemolytic activity and production of siderophores), 70% carried the intI1 gene and 85% exhibited a multi-drug resistance phenotype. Plasmid-mediated quinolone resistance genes were detected in ciprofloxacin-resistant Enterobacteriaceae [aacA4-cr (40% of the isolates), qnrS (30%), qnrB (25%), and qnrVC (8%)], along with mutations in gyrA (70%) and parC (72%). Cefotaxime-resistant strains (n = 23) harbored bla_CTX-M (70%), bla_TEM (61%) and bla_SHV (39%). Among CTX-M producers, high-risk clones of E. coli (e.g. ST10 or ST131) and K. pneumoniae (ST17) were identified, most of which carrying bla_CTX-M-15. Ten out of 16 CTX-M producers were able to transfer bla_CTX-M to a recipient strain. Our results demonstrated the occurrence of multidrug resistant Enterobacteriaceae in the riverine plastisphere, harboring ARGs of clinical concern and exhibiting virulence traits, suggesting a contribution of MPs to the dissemination of antibiotic-resistant priority pathogens. The type of MPs and especially water contamination (e.g. by WWTPs discharges) seem to determine the resistome of the riverine plastisphere.

Microplastics as emergent contaminants in landfill leachate: Source, potential impact and remediation technologies

A significant amount of plastic waste is generated each year on a global scale, in which the maximum quantity of plastic waste is typically dumped in landfills in various parts of the world. Moreover, dumping plastic waste in landfills cannot address the issue of proper disposal; it simply delays the process. Exploiting waste resources entails environmental hazards because plastic wastes buried in landfills gradually break down into Microplastics (MPs) due to physical, chemical, and biological effects. The possibility of landfill leachate as a source of MPs in the environment has not received much attention. Without systematic treatment, MPs in leachate increase the risk to human health and environmental health since they contain dangerous and toxic pollutants and antibiotic resistance genes transmitted by leachate vectors. Due to their severe environmental risks, MPs are now widely recognized as emerging pollutants. Therefore, the composition of MPs in landfill leachate and the interaction of MPs with other hazardous contaminants are summarised in this review. The available potential mitigation or treatment methods of MPs in landfill leachate as of now, along with the drawbacks and challenges of the present leachate treatment for eliminating MPs, are described in this review. Since it is unclear how MPs will be removed from the current leachate facilities, it is crucial to develop innovative treatment facilities as quickly as possible. Finally, the areas that require more research to provide complete solutions to the persistent problem of plastic debris are discussed.

Nano and microplastics occurrence in wastewater treatment plants: A comprehensive understanding of microplastics fragmentation and their removal

Nano/microplastic (NP/MP) pollution is a growing concern for the water environment. Wastewater treatment plants (WWTPs) are considered the major recipients of MP before discharging into local waterbodies. MPs enter WWTPs mainly from synthetic fibers through washing activities and personal care products. To control and prevent NP/MP pollution, it is essential to have a comprehensive understanding of their characteristics, fragmentation mechanisms, and the effectiveness of the current treatment processes used in WWTPs for NP/MP removal. Therefore, the objectives of this study are to (i) understand the detailed mapping of NP/MP in the WWTP, (ii) understand the fragmentation mechanisms of MP into NP, and (iii) investigate the removal efficiency of NP/MP by existing processes in the WWTP. This study found that fiber is the dominant shape of MP, and polyethylene, polypropylene, polyethylene terephthalate, and polystyrene are the major polymer type of MP in wastewater samples. Crack propagation and mechanical breakdown of MP due to water shear forces induced by treatment facilities (e.g., pumping, mixing, and bubbling) could be the major causes for NP generation in the WWTP. Conventional wastewater treatment processes are ineffective for the complete removal of MPs. Although these processes are capable of removing ∼95% of MPs, they tend to accumulate in sludge. Thus, a significant number of MPs may still be released into the environment from WWTPs on a daily basis. Therefore, this study suggested that using DAF process in the primary treatment unit can be an effective strategy to control MP in the initial stage before it goes to the secondary and tertiary stage.

Novel CuMgAlTi-LDH Photocatalyst for Efficient Degradation of Microplastics under Visible Light Irradiation

Microplastics (MPs) in the water system could easily enter the human body and pose a potential threat, so finding a green and effective solution remains a great challenge. At present, the advanced oxidation technology represented by photocatalysis has been proven to be effective in the removal of organic pollutants, making it a feasible method to solve the problem of MP pollution. In this study, the photocatalytic degradation of typical MP polystyrene (PS) and polyethylene (PE) by a new quaternary layered double hydroxide composite photomaterial CuMgAlTi-R400 was tested under visible light irradiation. After 300 h of visible light irradiation, the average particle size of PS decreased by 54.2% compared with the initial average particle size. The smaller the particle size, the higher the degradation efficiency. The degradation pathway and mechanism of MPs were also studied by GC-MS, which showed that PS and PE produced hydroxyl and carbonyl intermediates in the process of photodegradation. This study demonstrated a green, economical, and effective strategy for the control of MPs in water.

Biomass formation and organic carbon migration potential of microplastics from a PET recycling plant: Implication of biostability

The growth of the polyethylene terephthalate (PET) mechanical recycling industry has resulted in the challenge of generating microplastics (MPs). However, little attention has been given to investigating the release of organic carbon from these MPs and their roles in promoting bacterial growth in aquatic environments. In this study, a comprehensive method is proposed to access the potential of organic carbon migration and biomass formation of MPs generated from a PET recycling plant, and to understand its impact on the biological systems of freshwater habitats. Various MPs sizes from a PET recycling plant were selected to conduct a series of tests, including the organic carbon migration test, biomass formation potential test, and microbial community analysis. The MPs smaller than 100 µm, which are difficult to remove from the wastewater, exhibited greater biomass in the observed samples (1.05 × 10¹¹ bacteria per gram MPs). Moreover, PET MPs altered the microbial diversity, with Burkholderiaceae becoming the most abundant, while Rhodobacteraceae was eliminated after being incubated with MPs. This study partly revealed that organic matter adsorbed on the surface of MPs was a significant nutrient source that increased biomass formation. PET MPs acted not only as carriers for microorganisms but also for organic matter. As a result, it is crucial to develop and refine recycling methods in order to decrease the production of PET MPs and minimize their adverse effects on the environment.

P, N, and C-related functional genes in SBR system promoted antibiotics resistance gene transmission under polystyrene microplastics stress

Wastewater treatment plants (WWTPs) are important sinks of microplastics (MPs) and antibiotics resistance genes (ARGs). Information regarding connections between functional modules of WWTPs and spread of ARGs under MPs stress is still lacking. In this study, correlations between P-, N-, and C-related functional genes and ARGs in a sequencing batch reactor (SBR) system were evaluated under polystyrene (PS) MPs stress. Total P and chemical oxygen demand (COD) in effluent showed no significant changes under 0.5-50 mg L^-1 PS MPs stress within 32 cycle treatment periods of SBR, while 0.5 mg L^-1 PS MPs affected the N cycling process. PS MPs (0.5-50 mg L^-1) promoted the richness and diversity of microbial community in SBR, and the denitrification process was exuberant. PS MPs with a low dosage (0.5-5 mg L^-1) enhanced secretion of extracellular polymeric substances and promoted expression levels of functional genes related to C fixation, C degradation, P cycling, and N cycling. Simultaneously, aac(3)-II, bla_TEM-1, and tetW increased by 27.13%, 38.36%, and 9.57% under low dosages of PS MPs stress; more importantly, the total absolute abundance of intI1 nearly doubled. 78.4% of these P-, N-, and C-related functional genes were positively correlated with intI1, thus favoring transmission of ARGs. This study firstly disclosed the underlying correlations between functional modules of WWTPs and spread of ARGs under MPs stress.

Microplastics in Sewage Sludge: A review

Microplastics (MPs) represent a serious problem for the environment and for this reason they have been studied in many articles, especially their presence in aquatic environments and soils. MPs have been found in wastewater and sewage sludge from municipal wastewater treatment plants (WWTPs). Most part of the published works have focused on the detection and elimination of MPs in the water line and several reviews have been published in the last years. In addition, the application of sewage sludge produced from WWTPs for agricultural use is known to be a primary source of MPs in soils. However, in the scientific literature less attention has been paid to the sludge and little is known about MPs fate when it is applied in agriculture. This work aims to give a global revision on the most used techniques to identify and detect MPs in sludges, their characteristics and incidence, their effect on sludge treatments and their impact on the environment. As far as we know, there are no standardized protocols for MPs extraction from soil and the possible repercussions on the cultivation of plants are not known. This review evidences that more studies are necessary to stablished standardized protocols and decipher the main mechanisms and the effects of MPs from sewage sludge in the environment.

Detection methods of micro and nanoplastics

Plastics and related contaminants (including microplastics; MPs and nanoplastics; NPs) have become a serious global safety issue due to their overuse in many products and applications and their inadequate management, leading to possible leakage into the environment and eventually to the food chain and humans. There is a growing literature reporting on the occurrence of plastics, (MPs and NPs) in both marine and terrestrial organisms, with many indications about the harmful impact of these contaminants on plants and animals, as well as potential human health risks. The presence of MPs and NPs in many foods and beverages including seafood (especially finfish, crustaceans, bivalves, and cephalopods), fruits, vegetables, milk, wine and beer, meat, and table salts, has become popular research areas in recent years. Detection, identification, and quantification of MPs and NPs have been widely investigated using a wide range of traditional methods, such as visual and optical methods, scanning electron microscopy, and gas chromatography-mass spectrometry, but these methods are burdened with a number of limitations. In contrast, spectroscopic techniques, especially Fourier-transform infrared spectroscopy and Raman spectroscopy, and other emerging techniques, such as hyperspectral imaging are increasingly being applied due to their potential to enable rapid, non-destructive, and high-throughput analysis. Despite huge research efforts, there is still an overarching need to develop reliable analytical techniques with low cost and high efficiency. Mitigation of plastic pollution requires establishing standard and harmonized methods, adopting holistic approaches, and raising awareness and engaging the public and policymakers. Therefore, this chapter focuses mainly on identification and quantification techniques of MPs and NPs in different food matrices (mostly seafood).

Occurrence, characteristics, and removal of microplastics in wastewater treatment plants located on the Moroccan Atlantic: The case of Agadir metropolis

Wastewater treatment plants (WWTPs) are some of the main sources of microplastics (MPs) in the environment. However, studies on the occurrence and removal efficiency of MPs in WWTPs are still scarce, especially in African countries. Thus, the aim of this work was to study the abundance of MPs in the influent and effluent of two WWTPs (Aourir and M'zar) from the Agadir metropolis (Moroccan Atlantic). The two WWTPs receive different wastewater inputs (domestic and industrial). In addition, the impacts of seasonality on the fate and removal efficiency were investigated. The results showed that the MPs abundance in the wastewater decreased from 188 MPs/L in the influent to 50 MPs/L in the effluent for Aourir WWTP (domestic inputs); while the abundance was greater in the M'zar WWTP (urban and industrial inputs) recording a mean value of 519 MPs/L and 86 MPs/L in the influent and effluent, respectively. MPs collected in the Aourir WWTP ranged from 290 to 3200 μm, while MPs from the M'zar WWTP, ranged from 330 to 4200 μm. Overall, the size range of 100-500 μm was the most abundant for both WWTPs. Fibers were the highest MPs morphotype found, followed by fragments. MP colors were mainly red, black, blue, and transparent for both treatment plants. Additionally, FTIR spectroscopy showed the presence of eight different polymers, mainly polyethylene (PE), polypropylene (PP), and polystyrene (PS). Seasonal variation analysis showed that MPs abundance in summer was significantly higher compared to other seasons. However, the comparison of the removal efficiency (RE) between the different seasons indicated that the winter season (74 %) recorded the highest RE for Aourir WWTP. Conversely, spring (87 %) recorded the highest RE for M'zar WWTP. SEM/EDX micrographs showed different degrees of weathering and chemical elements adhering to the surface of the MPs. The findings of the current study will serve as a baseline for future considerations about management strategies, wastewater reuse, as well as the understanding of the occurrence of microplastic pollution along the marine ecosystems of Morocco.

Contribution of household dishwashing to microplastic pollution

At household level, clothes washing has been recognised as an emitter of microplastics (MPs) into the environment and it is supposed that dishwashing is also a source of MPs, although little attention has been paid so far. In this work, the emission of MPs released from dishwashing procedures at household level has been studied. The effect of different parameters such as time, temperature and type of detergent has been analysed. In addition, the MP content of tap water has been evaluated in order to determine its contribution to the MPs in dishwasher effluent. Results showed that when the dishwasher was operated empty with a pre-wash programme (15 min and room water temperature), between 207 and 427 MPs were released per load (3 L), whereas this value increased notably with an intensive programme (164 min and water at 70 °C) (1025-1370 MPs per load, 15 L), which highlighted the effect of temperature and time on MP release. Additionally, when a polypropylene lunch box was washed, the number of MPs released increased by 14 ± 3 MPs and 166 ± 12 MPs of total. Finally, the influence of the use of detergent with the dishwasher empty and containing lunch boxes has been studied. With detergent, 35-54% more MPs were released from dishwasher accessories, whereas no additional release took place from lunch boxes. This work shows for the first time the important contribution of domestic dishwashing to MP pollution and the environmental benefits of using more environmentally friendly materials in both dishwashing machine accessories and food utensils.

Quantitative and qualitative variations of biopolymers in a pilot-scale membrane bioreactor treating municipal wastewater throughout 3 years of operation

In this study, the fouling potential of mixed liquor suspension samples collected from a pilot-scale membrane bioreactor (MBR) that treated municipal wastewater was monitored for more than 3 years. The fouling potential was assessed by batch filtration experiments using the same type of membrane as equipped in the MBR. The fouling potential increased when the temperature of the mixed liquor suspension in the MBR decreased. However, the polysaccharide and protein concentrations in the mixed liquor suspension, which have been focused on many previous studies, did not correlate with the fouling potential (R² = 0.15 and 0.39, respectively). In contrast, the concentration of biopolymers, quantified by liquid chromatography-organic carbon detection (LC-OCD), exhibited a marked correlation with the fouling potential (R² = 0.89). A high concentration of biopolymers with large molecular weight (>1 million Da) was likely responsible for the high fouling potential. Fourier transform infrared (FTIR) analysis of the dissolved organic matter in the mixed liquor suspension indicated that the chemical properties of the biopolymers considerably varied with the seasonal temperature variation, which has rarely been reported and gives insights into fouling in MBRs. The effect of temperature on the biopolymer concentration and molecular weight of biopolymers was also investigated in a separate bench-scale experiment in which temperature was controlled. It was clearly shown that a low temperature induced an increase in the biopolymer concentration and an associated increase in the fouling potential of the mixed liquor suspension.

Environmental microplastics exposure decreases antioxidant ability, perturbs gut microbial homeostasis and metabolism in chicken

The widespread presence and accumulation of microplastics (MPs) in organisms has led to their recognition as a major global ecological issue. There is a lot of data on how MPs affect the physiology and behavior of aquatic species, but the effects of MPs on poultry are less understood. Therefore, we aimed to explore the adverse effects and mechanisms of MPs exposure to chicken health. Results indicated that MPs exposure decreased growth performance and antioxidant ability and impaired chickens' intestine, liver, kidney, and spleen. Additionally, the gut microbiota in chickens exposed to MPs showed a significant decrease in alpha diversity, accompanied by significant alternations in taxonomic compositions. Microbial taxonomic investigation indicated that exposure to MPs resulted in a significant increase in the relative proportions of 11 genera and a distinct decline in the relative percentages of 3 phyla and 52 genera. Among decreased bacterial taxa, 11 genera even couldn't be detected in the gut microbiota of chickens exposed to MPs. Metabolomics analysis indicated that 2561 (1190 up-regulated, 1371 down-regulated) differential metabolites were identified, mainly involved in 5 metabolic pathways, including D-amino acid metabolism, ABC transporters, vitamin digestion and absorption, mineral absorption, and histidine metabolism. Taken together, this study indicated that MPs exposure resulted in adverse health outcomes for chickens by disturbing gut microbial homeostasis and intestinal metabolism. This study also provided motivation for environmental agencies worldwide to regulate the application and disposal of plastic products and decrease environmental contamination.

Assessment and accumulation of microplastics in sewage sludge at wastewater treatment plants located in Cádiz, Spain

Sludge from Wastewater treatment plants (WWTPs) have been determined as a sink of microplastics (MP) removed from wastewater. The aim of this research work has been to evaluate the presence of these pollutants in the sludge of seven WWTPs (five urban and two industrial), located in southern Spain. Samples were collected in the primary, secondary and digested sludge matrixes, MPs were extracted following wet peroxide oxidation and the removal of cellulose, finally the samples were analyzed according to their abundance, size (from 100 μm to 5 mm), shape, colour, and polymer type. Subsequently, the data obtained on the WWTPs were compared, the main difference among the WWTPs and different sample points showed high heterogeneity in terms of abundance of microplastics, due to the differences in the sludge loaded, the processes and the type of sludge. The results from this study established that the most abundant shape was fibers; regarding the size, 100-355 μm fraction was the most abundant, showing that the amount of MPs increased when the size decreased. Regarding the type of polymers, 23 were identified by ATR-FTIR. Further, Acrylate, PE, EAA and PP were the most abundant found polymers. The presence of MPs in the digested sludge varied from 0.02 ± 0.006 MP g DW^-1 to 57.18 ± 20.69 MP g DW^-1 in the WWTP 6 (food industry) and WWTP 3 (urban city over 212,000 inhabitants), respectively; higher abundance of MPs found in the primary sludge in respect to secondary sludge; in concordance with the removal from wastewater line reported in other studies. The results obtained showed that MPs were widely present in sludge, becoming a sink of these pollutants, estimating that among 8.05 · 10⁴ and 1.77 · 10⁹ MPs · day^-1 were loaded to sludge; therefore, these facilities act as a significant source of MPs into agriculture when sludge is used as soil amendment.

Rapid and efficient removal of organic matter from sewage sludge for extraction of microplastics

Microplastic pollution is recognized as an emerging global issue; however, no standardized method for the extraction of these pollutants from the environment currently exists and existing methods are ineffective for specific environmental matrices. An appropriate organic matter removal method is essential for the extraction of microplastics from organic-rich sludge to minimize interference during their identification and enhance compatibility of the identification steps. The present study aimed to establish an effective technique for the digestion of organic matter-rich sludge using hydrogen peroxide and Fenton's reagent at varying temperatures, times, and concentrations of an iron catalyst. The organic matter removal efficiency of the five protocols utilized varied from 81.5 % to 87.1 %. Polymers such as polyvinyl chloride (PVC), high density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP), and polystyrene (PS) retained most of their physical and chemical properties after the treatments, with minor changes in the surface area, weight, and FTIR spectra properties. Polyethylene terephthalate (PET), PET fiber, polyamide (PA) fiber, and polymethyl methacrylate (PMMA) fiber were significantly degraded via treating with H₂O₂ at 50 °C for 24 h. Protocol 4, treating with Fenton's reagent (H₂O₂ (30 %) + (0.05 M) FeSO₄.7H₂O) at 50 °C for 1 h is proposed as a rapid and effective method for the removal of organic matter from sludge. In addition to its rapidity, this method minimally impacts most polymers, and its high organic matter removal efficiency is associated with a significant reduction of suspended solids in sludge. The present study provides a validated approach that facilitates as an effective organic removal step during the extraction of MPs in sludge.

The weathering process of polyethylene microplastics in the paddy soil system: Does the coexistence of pyrochar or hydrochar matter?

This study is based on a particular test site to simulate the weathering process of microplastics (MPs) in paddy soil. A substantial amount of plastic waste, especially MPs, inevitably accumulates in agricultural soil due to the high consumption and short average use of plastics. Recently, MP pollution has become a global environmental concern. However, insight into the soil weathering process of MPs in paddy soil, particularly in the presence of biochar, is lacking. In this study, the physicochemical properties of polyethylene (PE) MPs were determined through a 24-week weathering system conducted in paddy soil, paddy soil with pyrochar, or hydrochar. Moreover, the sorption of original and weathered PE MPs toward three typical pollutants (cadmium/Cd, bisphenol A/BPA, and dimethyl phthalate/DMP) was investigated. The surface of PE MPs was fractured, 1.1-fold rougher, yellow-colored (11.7 units), and 1.8-fold more oxidized after paddy soil weathering. In addition, the crystallinity, negative charge, and stronger hydrophilicity of weathered PE MPs increased compared to original PE MPs. Weathering in a pyrochar or hydrochar system caused fissures, extensive destruction of amorphous areas, and accelerated chemical or bio-oxidation processes for PE MPs, resulting in a more noticeable change in roughness (1.4-2.2-fold), yellow color (12.7-13.7), crystallinity (1.2-1.5-fold), and oxygen content (2.5-3.6-fold). Weathered PE MPs facilitated the sorption with Cd and BPA, attributed to larger specific surface area, abundant polar functional groups, and increased negatively charged sites. However, sorption of DMP to PE MPs was highly influenced by their hydrophobicity, resulting in decreased hydrophobic partition sorption on weathered PE MPs. Overall, paddy soil weathering affected the properties of PE MPs and enhanced sorption of Cd and BPA but reduced sorption of DMP. The coexistence of biochar exacerbated the paddy soil weathering effect. The insight gained from this study assists in better understanding the weathering process of PE MPs in agricultural soils.

Insights into the degradation of microplastics by Fenton oxidation: From surface modification to mineralization

This work aims at evaluating the fate of microplastics (MPs) along Fenton oxidation. For such goal, realistic MPs (150-250 μm) of five representative polymer types (PET, PE, PVC, PP and EPS) were obtained from commercial plastic products by cryogenic milling. Experiments (7.5 h) were performed under relatively severe operating conditions: T = 80 °C; pH₀ = 3; [H₂O₂]₀ = 1000 mgL^-1 (15 doses, 1 every 0.5 h); [Fe³⁺]₀ = 10 mgL^-1 (5 doses, 1 every 1.5 h). Slight MPs weight losses (∼10%) were achieved after Fenton oxidation regardless the MP nature. Nevertheless, oxidation yield clearly increased with decreasing the particle size given their higher exposed surface area (up to 20% weight loss with 20-50 μm EPS MPs). Clearly, MPs suffered important changes in their surface due to the introduction of oxygenated groups, which made them more acidic and hydrophilic. Furthermore, MPs progressively reduced their size. In fact, they can be completely oxidized to CO₂, as demonstrated in the oxidation of PS nanoplastics (140 nm), where 70% mineralization was achieved. The nature of the plastic particles had a relevant impact on its overall oxidation, being more prone to be oxidized those polymers which contain aromatic rings in their structures (EPS and PET) compared to those formed by alkane chains (PE, PP and PVC). In the latter, the presence of substituents also reduced their oxidation potential. Remarkably, possible leachates released along reaction were more quickly oxidized than the MPs/NPs, so it can be assumed that these dissolved compounds would be completely removed once the solid particles are eliminated. Notably, the leachates obtained upon MPs oxidation were more biodegradable than the released from the fresh solids. All this knowledge is crucial for the understanding of MPs oxidation by the Fenton process and opens the door for the design and optimization of this technology either for water treatment or for analytical purposes (MPs isolation).

New Application of Quartz Crystal Microbalance: A Minimalist Strategy to Extract Adsorption Enthalpy

The capture and separation of CO₂ is an important means to solve the problem of global warming. MOFs (metal-organic frameworks) are considered ideal candidates for capturing CO₂, where the adsorption enthalpy is a crucial indicator for the screening of materials. For this purpose, we propose a new minimalist solution using QCM (quartz crystal microbalance) to extract the CO₂ adsorption enthalpy on MOFs. Three kinds of MOFs with different properties, sizes and morphologies were employed to study the adsorption enthalpy of CO₂ using a QCM platform and a commercial gas sorption analyzer. A Gaussian simulation calculation and previously data reported were used for comparison. It was found that the measuring errors were between 5.4% and 6.8%, proving the reliability and versatility of our new method. This low-cost, easy-to-use, and high-accuracy method will provide a rapid screening solution for CO₂ adsorption materials, and it has potential in the evaluation of the adsorption of other gases.

Evidences of microplastics in aerosols and street dust: a case study of Varanasi City, India

Microplastics (MPs) are ubiquitous in our environment. Its presence in air, water, and soil makes it a serious threat to living organisms and has become a critical challenge across ecosystems. Present study aimed to assess the abundance of MPs in aerosols and street dust in Varanasi, a typical urban city in Northern India. Airborne particulates and street dust samples were collected from various sampling sites around Varanasi City. The physical identification of MPs was conducted by binocular microscopy, fluorescence microscopy, and scanning electron microscopy (SEM), while elemental analysis was made by energy-dispersive X-ray (EDX). Finally, Fourier-transform infrared spectroscopy (FTIR) was used for chemical characterization of MPs. Presence of MPs in both aerosols and street dust from all selected sampling sites was confirmed, however with varying magnitude. MPs of different colors having the shape of fragments, films, spherules, and fibers were recorded in the study while fragments (42%) in street dust and fibers (44%) dominated in aerosols. Majority of the MPs were < 1 mm in size and were primarily polypropylene, polystyrene, polyethylene, polyethylene terephthalate, polyester, and polyvinyl chloride types. The EDX spectra showed the presence of toxic inorganic contaminants like metallic elements on MPs, especially elements like aluminum, cadmium, magnesium, sodium, and silicon found to adsorb on the MPs. Presence of MPs in the airborne particulates and street dust in Varanasi is reported for the first time, thus initiating further research and call for a source-specific management plan to reduce its impact on human health and environment.