A review on in-vitro oral bioaccessibility of organic pollutants and its application in human exposure assessment

Bioaccessibility and bioavailability assessment of cadmium in rice: In vitro simulators with/without gut microbiota and validation through in vivo mouse and human data

Assessing the bioaccessibility and bioavailability of cadmium (Cd) is crucial for effective evaluation of the exposure risk associated with intake of Cd-contaminated rice. However, limited studies have investigated the influence of gut microbiota on these two significant factors. In this study, we utilized in vitro gastrointestinal simulators, specifically the RIVM-M (with human gut microbial communities) and the RIVM model (without gut microbial communities), to determine the bioaccessibility of Cd in rice. Additionally, we employed the Caco-2 cell model to assess bioavailability. Our findings provide compelling evidence that gut microbiota significantly reduces Cd bioaccessibility and bioavailability (p<0.05). Notably, strong in vivo-in vitro correlations (IVIVC) were observed between the in vitro bioaccessibilities and bioavailabilities, as compared to the results obtained from an in vivo mouse bioassay (R2 = 0.63-0.65 and 0.45-0.70, respectively). Minerals such as copper (Cu) and iron (Fe) in the food matrix were found to be negatively correlated with Cd bioaccessibility in rice. Furthermore, the results obtained from the toxicokinetic (TK) model revealed that the predicted urinary Cd levels in the Chinese population, based on dietary Cd intake adjusted by in vitro bioaccessibility from the RIVM-M model, were consistent with the actual measured levels (p > 0.05). These results indicated that the RIVM-M model represents a potent approach for measuring Cd bioaccessibility and underscore the crucial role of gut microbiota in the digestion and absorption process of Cd. The implementation of these in vitro methods holds promise for reducing uncertainties in dietary exposure assessment.

Effect of UV exposure and natural aging on the in vitro PAHs bioaccessibility associated with tire wear particles in soil

Tire wear particles (TWP), as an emerging type of microplastics, are a significant source of contaminants in roadside soils due to their high concentration of pollutants, including polycyclic aromatic hydrocarbons (PAHs). This study explored the impact of ultraviolet (UV) exposure and natural aging on the in vitro bioaccessibility of PAHs associated with TWP in soil on a China-wide scale. Our findings suggested that UV exposure amplified the negative charge of TWP by 75 % and increased the hydrophobic groups on the particle surface. The bioaccessibility of 3- and 4-ring PAHs in TWP was significantly (p < 0.05) heightened by UV exposure. After 20 types of soils containing 2 % UV-exposed TWP underwent natural aging, the bioaccessibility of PAHs saw a significant decrease (p < 0.05) to 16-48 %, compared to 28-96 % in the unaged group. Soil pH and electrical conductivity (EC) were the two primary soil properties positively influencing the reduction of in vitro PAHs concentration and PAHs bioaccessibility. According to the prediction results, soils in southern China presented the highest potential region for the release of bioaccessible PAHs from TWP, highlighting the regional specificity of environmental impact. Our study provides valuable insights into the biological impact of PAHs associated with TWP on a regional scale, and offers scientific evidence for targeted soil risk management strategies.

Effects of nitrile compounds on the structure and function of soil microbial communities as revealed by metagenomes

The proliferation of nitrile mixtures has significantly exacerbated environmental pollution. This study employed metagenomic analysis to investigate the short-term effects of nitrile mixtures on soil microbial communities and their metabolic functions. It also examined the responses of indigenous microorganisms and their functional metabolic genes across various land use types to different nitrile stressors. The nitrile compound treatments in this study resulted in an increase in the abundance of Proteobacteria, Actinobacteria, and Firmicutes, while simultaneously reducing overall microbial diversity. The key genes involved in the denitrification process, namely, nirK, nosZ, and hao, were down-regulated, and NO3--N, NO2--N, and NH4+-N concentrations decreased by 7.7%-12.3%, 11.1%-21.3%, and 11.3%-30.9%, respectively. Notably, pond sludge samples exhibited a significant increase in the abundance of nitrogen fixation-related genes nifH, vnfK, vnfH, and vnfG following exposure to nitrile compounds. Furthermore, the fumarase gene fumD, which is responsible for catalyzing fumaric acid into malic acid in the tricarboxylic acid cycle, showed a substantial increase of 7.2-10.6-fold upon nitrile addition. Enzyme genes associated with the catechol pathway, including benB-xylY, dmpB, dmpC, dmpH, and mhpD, displayed increased abundance, whereas genes related to the benzoyl-coenzyme A pathway, such as bcrA, dch, had, oah, and gcdA, were notably reduced. In summary, complex nitrile compounds were found to significantly reduce the species diversity of soil microorganisms. Nitrile-tolerant microorganisms demonstrated the ability to degrade and adapt to nitrile pollutants by enhancing functional enzymes involved in the catechol pathway and fenugreek conversion pathway. This study offers insights into the specific responses of microorganisms to compound nitrile contamination, as well as valuable information for screening nitrile-degrading microorganisms and identifying nitrile metabolic enzymes.

Machine learning models to predict the bioaccessibility of parent and substituted polycyclic aromatic hydrocarbons (PAHs) in food: Impact on accurate health risk assessment

Food intake is the primary pathway for polycyclic aromatic hydrocarbons (PAHs) to enter the human body. Once ingested, PAHs tend to accumulate, posing health risks. To accurately assess the risk of PAHs from food, concentrations of 10 parent PAHs (PPAHs) and 15 substituted PAHs (SPAHs) were detected across 34 commonly consumed foods. Results indicated that SPAHs concentrations (3.89-11.6 ng/g dw) were higher than PPAH concentrations (1.66-3.43 ng/g dw) in shrimp and shellfish and freshwater fish. Four machine learning algorithms were used to predict the bioaccessibility of PAHs in foods, with the random forest model performing the best (R2 =0.987, RMSE=5.99). Feature variable importance analysis revealed that lipid and protein contents in food are critical variables influencing PAH bioaccessibility. Subsequently, the bioaccessibility of 25 PAHs in various foods was predicted to explore its impact on health risk assessment. Consequently, the carcinogenic risks considering bioaccessibility (5.62 ×10-5-7.12 ×10-5) was about an order of magnitude lower than that ignoring bioaccessibility (1.52 ×10-4-1.69 ×10-4), yet it still exceeded 10⁻6, indicating potential carcinogenic risks. Although PPAHs and alkylated PAHs were predominant in foods, 6-nitrochrysene was the main compound inducing both non-carcinogenic and carcinogenic risks owing to its high toxicity. This study developed a novel method for assessing pollutant bioaccessibility and evaluating its impact on health risk assessment, which provides a valuable model for managing massive hazardous pollutants and is essential for improving the accuracy of health risk assessment.

Validation of the analytical methodology used in obtaining the oral bioavailability of organic target pollutants in atmospheric particulate matter (PM10) applying an in-vitro method

In recent years, scientists have started evaluating the portion of PM-bound pollutants that may be liberated (bioaccessible fraction) in human fluids and spread through the digestive system ultimately entering systemic circulation (known as the bioavailable fraction). In the current research, an analytical procedure was validated and applied to characterize the oral bioavailable fraction of PM10 samples. The approach encompassed the determination of 49 organic contaminants. The proposed method aims to biomimetic complete mouth-gastric-intestinal system basing on an adaptation of the unified bioaccessibility method (UBM) modified by the inclusion of a dialysis membrane to mimic intestinal absorption and obtain the orally bioavailable fractions. It was followed by a vortex-assisted liquid-liquid extraction (VALLE) step, using gas chromatography-tandem mass spectrometry (GC-MS/MS). Analytical procedure was effectively validated by employing selected reaction monitoring (SRM) mode in MS/MS, matrix-matched calibration, and deuterium-labelled surrogate standards. This approach ensured heightened sensitivity, minimized matrix effects, and compensated for any losses during the process. The validation process covered various aspects, including studying linearity, determining detection and quantification limits, assessing analytical recoveries at three concentration levels, and evaluating precision both within a single day and across multiple days. The validated method was applied to PM10 samples, revealing that polycyclic aromatic hydrocarbons (PAHs) were the most frequently detected, with significant seasonal variations in their concentrations. Organophosphorus flame retardants (OPFRs) like TCPP were also detected in bioavailable fractions, highlighting their potential health impact. Bisphenols, SMCs, and PAEs were not detected, suggesting low levels in the studied urban area. Further research is needed to understand the bioavailability of PM-bound pollutants in different environments.

Insights into the Enhanced Bioavailability of Per- and Polyfluoroalkyl Substances in Food Caused by Chronic Inflammatory Bowel Disease

Understanding the bioavailability of per- and polyfluoroalkyl substances (PFAS) in food is essential for accurate human health risk assessment. Given the rising incidence of inflammatory bowel disease (IBD), this study aimed to investigate the impacts of IBD on the bioavailability of PFAS in food using mice models. The relative bioavailability (RBA) of PFAS was the highest in the chronic IBD mice (64.3-144%), followed by the healthy (60.8-133%) and acute IBD mice (41.5-121%), suggesting that chronic IBD enhanced the PFAS exposure risk. In vitro tests showed that the intestinal micelle stability increased as a result of reduced content of short-chain fatty acids, thus promoting the PFAS bioaccessibility in the digestive fluid of chronic IBD. Additionally, increased pathogenic and decreased beneficial bacteria in the gut of IBD groups facilitated the intestinal permeability, thus enhancing PFAS absorption. These together explained the higher RBA of PFAS in the chronic IBD. However, remarkably lower enzymatic activities suggested severely impaired digestive ability in the acute IBD, which facilitated the excretion of PFAS from feces, thus lowering the RBA. Conversely, PFAS exposure might exacerbate IBD by changing the gut microbiota structures. This study hints that individuals with chronic intestinal inflammation might have higher PFAS exposure risk than the healthy population.

Study of Factors Influencing the Oral Bioaccessibility of Commonly Used and Detected Pesticides in Bananas and Mangoes Based on in vitro Methods

Estimating the impact of pesticide residue bioaccessibility in fruits on dietary exposure is a complex task in human health risk assessment. This research investigated the bioaccessibility of ten commonly used and detected pesticides in bananas and mangoes, as well as the factors influencing it, using an in vitro model. The highest bioaccessibility was observed at pH levels of 2.5 and 6.5 in the gastric and intestinal stages, respectively. Bioaccessibility decreased significantly with increasing solid/liquid ratios for most pesticides. The consumption of protein and four dietary components (carbohydrates, protein, lipids, and dietary fiber) could significantly reduce pesticide bioaccessibility by 9.89-48.32% (p < 0.05). Bioaccessibility in oral and gastric stages among four populations followed the order of adults/the elderly > children > infants, due to decreasing concentrations of α-amylase and pepsin. Pesticides in bananas generally exhibited a higher bioaccessibility (18.65-82.97%) compared to that in mangoes (11.68-87.57%). Bioaccessibility showed a negative correlation with the Log P values of the target pesticide, while no clear relationship was found between bioaccessibility and initial pesticide concentrations. Incorporating bioaccessible pesticide concentrations into risk assessments could lower dietary risk estimates by 11.85-79.57%. Assessing human exposure to pesticides based on bioaccessibility would greatly improve the accuracy of the risk assessment.

Bioaccessibility of halogenated flame retardants and organophosphate esters in settled dust: Influences of specific dust matrices from informal e-waste and end-of-life vehicle processing areas in Vietnam

Bioaccessibility of halogenated flame retardants (HFRs) and organophosphorus esters (OPEs) is necessarily investigated to provide more accurate risk assessment and information about absorption behavior of these pollutants. In this study, total and bioaccessible concentrations of HFRs (including legacy and alternative substances) and OPEs were determined in settled dust samples collected from Vietnamese e-waste and end-of-life vehicle (ELV) processing areas. Concentrations of both HFRs and OPEs were significantly higher in the e-waste dust than ELV dust. Bioavailability of HFRs and OPEs in dust was determined by using an in vitro assay with human-simulated digestive fluids, dialysis membrane, and Tenax® TA sorptive sink. Bioaccessibility of HFRs was markedly lower than that of OPEs, which could be largely due to higher hydrophobicity of HFRs compared to OPEs. Bioaccessibility of almost hydrophobic compounds were markedly lower in the e-waste dust (containing micronized plastic debris) than in the ELV dust (containing oily materials), suggesting the influence of specific dust matrices on pollutant bioaccessibility. Although the daily uptake doses of selected HFRs and OPEs from dust were markedly higher in the e-waste sites compared to the ELV sites, the direct exposure risk was not significant. Our results suggest that bioaccessibility can partly explain the differences between dust and uptake profiles, which may relate to accumulation profiles of HFRs and OPEs in human samples.

Inhalation bioaccessibility of imidacloprid in particulate matter: Implications for risk assessment during spraying

Adverse health outcomes due to the inhalation of pesticide residues in atmospheric particulate matter (PM) are gaining global attention. Quantitative health risk assessments of pesticide inhalation exposure highlight the need to understand the bioaccessibility of pesticide residues. Herein, the inhalation bioaccessibility of imidacloprid in PM was determined using three commonly used in vitro lung modeling methods (Artificial Lysosomal Fluid, Gamble Solution, and Simulated Lung Fluid). To validate its feasibility and effectiveness, we evaluated the bioavailability of imidacloprid using a mouse nasal instillation assay. The in vitro inhalation bioaccessibility of imidacloprid was extracted using Gamble Solution with a solid-liquid ratio of 1/1000, an oscillation rate of 150 r/min, and an extraction time of 24 h, showed a strong linear correlation with its in vivo liver-based bioavailability (R2 =0.8928). Moreover, the margin of exposure was incorporated into the inhalation exposure risk assessment, considering both formulations and nozzles. The inhalation unit exposure of imidacloprid for residents was 0.95-4.09 ng/m3. The margin of exposure for imidacloprid was determined to be acceptable when considering inhalation bioaccessibility. Taken together, these results indicate that the inhalation bioaccessibility of pesticides should be incorporated into assessments of human health risks posed by PM particles.

The Bioaccessibility and Bioavailability of Pentachlorophenol in Five Animal-Derived Foods Measured by Simulated Gastrointestinal Digestion

Pentachlorophenol (PCP) is a ubiquitous emerging persistent organic pollutant detected in the environment and foodstuffs. Despite the dietary intake of PCP being performed using surveillance data, the assessment does not consider the bioaccessibility and bioavailability of PCP. Pork, beef, pork liver, chicken and freshwater fish Ctenopharyngodon Idella-fortified by three levels of PCP were processed by RIVM and the Caco-2 cell model after steaming, boiling and pan-frying, and PCP in foods and digestive juices were detected using isotope dilution-UPLC-MS/MS. The culinary treatment and food matrix were significantly influenced (p < 0.05) in terms of the bioaccessibility and bioavailability of PCP. Pan-frying was a significant factor (p < 0.05) influencing the digestion and absorption of PCP in foods, with the following bioaccessibility: pork (81.37-90.36%), beef (72.09-83.63%), pork liver (69.11-78.07%), chicken (63.43-75.52%) and freshwater fish (60.27-72.14%). The bioavailability was as follows: pork (49.39-63.41%), beef (40.32-53.43%), pork liver (33.63-47.11%), chicken (30.63-40.83%) and freshwater fish (17.14-27.09%). Pork and beef with higher fat content were a key factor in facilitating the notable PCP bioaccessibility and bioavailability (p < 0.05). Further, the exposure of PCP to the population was significantly reduced by 42.70-98.46% after the consideration of bioaccessibility and bioavailability, with no potential health risk. It can improve the accuracy of risk assessment for PCP.

Concentration identification and endpoint-oriented health risk assessments on a broad-spectrum of organic compounds in atmospheric fine particles: A sampling experimental study in Beijing, China

Understanding the complicate chemical components in atmospheric fine particulate matter (PM2.5) helps policy makers for pollutants control track progress and identify disparities in overall health risks. However, till now, information on accurate component detection, source identification, and effect-oriented risk assessment is scarce, especially for the simultaneous analysis of a broad-spectrum of compounds. In this study, a high-throughput target method was employed to distinguish the occurrence and characteristics of 152 chemicals: phthalate esters (PAEs), organophosphate esters (OPEs), carboxylic acid esters (CAEs), nitrophenols (NPs), nitrogen heterocyclic compounds (NHCs), per- and poly-fluoroalkyl substances (PFASs), triclosan and its derivatives (TCSs), and organosulfates (OSs) in ambient PM2.5 collected from Beijing, China. Detection frequencies of 77 targeted compounds were >50 %. Total concentrations of all compounds ranged from 33.1 to 745 ng/m3. The median concentration of ∑PAEs (108 ng/m3) was the highest, followed by ∑CAEs (12.2 ng/m3) and ∑NPs (10.1 ng/m3). Organophosphate diesters (di-OPEs) and TCSs were reported for the first time in ambient PM2.5. The pollutants mainly originated from the local industrial production, release of building materials, and environmental degradation of parent compounds. Based on absorption, distribution, metabolism, excretion, and toxicity (ADMET)-oriented risk evaluations, we found that bis (2-ethylhexyl) phthalate, diisobutyl phthalate, dibutyl phthalate, and di (2-ethylhexyl) adipate have high health risks. Additionally, the high oxidative stress potential of 4-nitrocatechol and the strong blood-brain barrier penetration potential of triclosan cannot be ignored. Our study will facilitate the evaluations of specific health outcomes and mechanisms of pollutants, and suggestion of pollutants priority control to reduce human health hazards caused by atmospheric particles.

In vitro modeling of the post-ingestion bioaccessibility of per- and polyfluoroalkyl substances sorbed to soil and house dust

Per- and polyfluoroalkyl substances (PFAS) are regularly found in soils and dusts, both of which can be consumed by children at relatively high amounts. However, there is little data available to model the bioaccessibility of PFAS in soils and dusts when consumed or to describe how the physiochemical properties of PFAS and soils/dusts might affect bioaccessibility of these chemicals. Because bioaccessibility is an important consideration in estimating absorbed dose for exposure and risk assessments, in the current study, in vitro assays were used to determine bioaccessibility of 14 PFAS in 33 sets of soils and dusts. Bioaccessibility assays were conducted with and without a sink, which was used to account for the removal of PFAS due to their movement across the human intestine. Multiple linear regression with backward elimination showed that a segmented model using PFAS chain length, number of branches, and percent total organic carbon explained 78.0%-88.9% of the variability in PFAS bioaccessibility. In general, PFAS had significantly greater bioaccessibility in soils relative to dusts and the addition of a sink increased bioaccessibility in the test system by as much as 10.8% for soils and 20.3% for dusts. The results from this study indicate that PFAS bioaccessibility in soils and dusts can be predicted using a limited set of physical chemical characteristics and could be used to inform risk assessment models.

Tracing the Bioaccessibility of Per- and Polyfluoroalkyl Substances in Fish during Cooking Treatment

The effect of cooking on the contents of per- and polyfluoroalkyl substances (PFAS) in foods has been widely studied, but whether cooking-induced structural and chemical modifications in foods affect the oral bioaccessibility of PFAS remains largely unknown. In this study, three kinds of fishes with different fat contents were selected, and the bioaccessibility of PFAS during cooking treatment (steaming and frying) was evaluated using in vitro gastrointestinal simulation with gastric lipase addition. The results showed that related to their molecular structures, the bioaccessibility of an individual PFAS varied greatly, ranging from 26.0 to 108.1%. Cooking can reduce the bioaccessibility of PFAS, and steaming is more effective than oil-frying; one of the possible reasons for this result is that the PFAS is trapped in protein aggregates after heat treatment. Fish lipids and cooking oil ingested with meals exert different effects on the bioaccessibility of PFAS, which may be related to the state of the ingested lipid/oil and the degree of unsaturation of fatty acids. Gastric lipase boosted the release of long-chain PFAS during in vitro digestion, indicating that the degree of lipolysis considerably influences the bioaccessibility of hydrophobic PFAS. Estimated weekly PFAS intakes were recalibrated using bioaccessibility data, enabling more accurate and reliable dietary exposure assessments.

Bioavailability and health risk assessment of Zn and Cd in edible tissues of two typical shellfish species using in vitro gastrointestinal digestion

Dynamic extraction of edible tissues of Jinjiang oyster (Crassostrea rivularis) and Flower clam (Paphia undulata) was conducted using a fully biomimetic digestion (in vitro) method. The impact of different cooking methods on the bioavailability of Zn and Cd in the edible shellfish tissues was analyzed, and the human health risk of Zn and Cd was evaluated. The results show that the gastric biomimetic extractions of Zn and Cd in unheated samples of C. rivularis and P. undulata were higher than those in the intestinal biomimetic extraction. The extraction patterns of cooked samples were consistent with those of raw samples. The bioavailability of Zn and Cd in cooked samples of C. rivularis was 94.9% and 82.5%, respectively, indicating increased Zn bioavailability but decreased Cd bioavailability compared to the raw samples. The bioavailability of Zn and Cd in cooked samples of P. undulata was 85.1% and 83.0%, respectively, both of which decreased compared to the raw samples. Consumption of C. rivularis can provide 21.0% to 34.2% of the daily required Zn intake, while consumption of P. undulata can provide 3.8% to 6.4%. The intake of Cd from both shellfish species is below the monthly tolerable intake recommended by FAO/WHO. Consuming cooked C. rivularis can increase the intake of Zn and decrease the intake of Cd.

Maternal transfer of resorcinol-bis(diphenyl)-phosphate perturbs gut microbiota development and gut metabolism of offspring in rats

Resorcinol-bis(diphenyl)-phosphate (RDP), an emerging organophosphate flame retardant, is increasingly used as a primary alternative for decabromodiphenyl ether and is frequently detected in global environmental matrices. However, the long-term effects of its exposure to humans remain largely unknown. To investigate its intergenerational transfer capacity and health risks, female Sprague Dawley rats were orally exposed to RDP from the beginning of pregnancy to the end of the lactation period. The RDP content, gut microbiota homeostasis, and metabolic levels were determined. RDP accumulation occurred in the livers of maternal rats and offspring and increased with exposure time. 16S rRNA gene sequencing showed that exposure to RDP during pregnancy and/or lactation significantly disrupted gut microbiota homeostasis, as evidenced by decreased abundance and diversity. In particular, the abundance of Turicibacter, Adlercreutzia, and YRC22 decreased, correlating significantly with glycollipic metabolism. This finding was consistent with the reduced levels of short-chain fatty acids, the crucial gut microbial metabolites. Meanwhile, RDP exposure resulted in changes in gut microbiome-related metabolism. Nine critical overlapping KEGG metabolic pathways were identified, and the levels of related differential metabolites decreased. Our results suggest that the significant adverse impacts of RDP on gut microbiota homeostasis and metabolic function may increase the long-term risks related to inflammation, obesity, and metabolic diseases.

A comprehensive review on the potential of microbial enzymes in multipollutant bioremediation: Mechanisms, challenges, and future prospects

Industrialization and other human activity represent significant environmental hazards. Toxic contaminants can harm a comprehensive platform of living organisms in their particular environments. Bioremediation is an effective remediation process in which harmful pollutants are eliminated from the environment using microorganisms or their enzymes. Microorganisms in the environment often create a variety of enzymes that can eliminate hazardous contaminants by using them as a substrate for development and growth. Through their catalytic reaction mechanism, microbial enzymes may degrade and eliminate harmful environmental pollutants and transform them into non-toxic forms. The principal types of microbial enzymes which can degrade most hazardous environmental contaminants include hydrolases, lipases, oxidoreductases, oxygenases, and laccases. Several immobilizations, genetic engineering strategies, and nanotechnology applications have been developed to improve enzyme performance and reduce pollution removal process costs. Until now, the practically applicable microbial enzymes from various microbial sources and their ability to degrade multipollutant effectively or transformation potential and mechanisms are unknown. Hence, more research and further studies are required. Additionally, there is a gap in the suitable approaches considering toxic multipollutants bioremediation using enzymatic applications. This review focused on the enzymatic elimination of harmful contaminants in the environment, such as dyes, polyaromatic hydrocarbons, plastics, heavy metals, and pesticides. Recent trends and future growth for effectively removing harmful contaminants by enzymatic degradation are also thoroughly discussed.

Comparison of in vitro strategies for predicting Dichlorodiphenyltrichloroethane (DDT) and its metabolites bioavailability from soils

In vitro strategies have widely been used to assess bioaccessibility of organic pollutants in soils. However, studies for comparing in vitro models with in vivo data are still limited. In this study, Dichlorodiphenyltrichloroethane (DDT) and its metabolites (called as DDTr) bioaccessibility in nine contaminated soils were measured using physiologically based extraction test (PBET), in vitro digestion model (IVD), and Deutsches Institut für Normung (DIN) with/without Tenax as an absorptive sink, and DDTr bioavailability was assessed using an in vivo mouse model. Whether or not Tenax was added, DDTr bioaccessibility significantly varied among three methods, suggesting that DDTr bioaccessibility depended on the in vitro method employed. Multiple linear regression analysis indicated that sink, intestinal incubation time and bile content are identified to be the dominant factors in controlling DDTr bioaccessibility. Comparison of in vitro and in vivo results demonstrated that DIN assay with Tenax (TI-DIN) provided the best prediction for DDTr bioavailability (r² = 0.66, slope=0.78). After extending intestinal incubation time to 6 h or increasing bile content to 4.5 g/L (same to DIN assay) of the TI-PBET and TI-IVD assays, the in vivo-in vitro correlation will improved significantly, with r² = 0.76 and slope= 1.4 for TI-PBET and r² = 0.84 and slope= 1.9 for TI-IVD under 6 h intestinal incubation, and r² = 0.59 and slope= 0.96 for TI-PBET and r² = 0.51 and slope= 1.0 for TI-IVD under 4.5 g/L of bile content. The results suggest that it is essential to understand these key factors influencing bioaccessibility for the development of standardized in vitro methods, which helps to refine the risk assessment of human exposure to contaminants via soil ingestion.

Bioaccessibility and bioavailability of NPAHs in soils using in vitro-in vivo assays: Comparison of laboratory and outdoor environmental aging effect

Aging process is one of the most important factors that markedly reduces bioaccessibility and bioavailability (bioac-bioav) of organic contaminants. However, only few data on comparison of the effects of laboratory artificial aging (LAA) and outdoor environmental aging (OEA) processes on nitrated polycyclic aromatic hydrocarbons (NPAHs) bioac-bioav are available. In the current study, oral bioac-bioav of NPAHs in LAA and OEA soils (aging time intervals: 0, 45, 90, 120 and 150 d) were measured by in vitro traditional Fed ORganic Estimation human Simulation Test (FOREhST) and Tenax improved FOREhST (TI-FOREhST) methods, and in vivo mouse model. Tenax significantly increased the bioaccessibility of NPAHs in freshly spiked and aging soils from 0.3-40.9 % to 15.6-95.3 %, and 0.3-40.9 % to 1.0-84.5 %, respectively. Aging significantly reduced the NPAHs bioaccessibility (from 36.5 % to 10.7 %, and 12.1 % to 5.1 % as measured by FOREhST and TI-FOREhST, respectively) and bioavailability (from 27.7 % to 9.9 %, as measured by mouse model). The changes in bioac-bioav were mainly observed within the first 120 d of aging. The statistical analyses of NPAHs bioac-bioav showed no significant difference (p > 0.05) among the aging time intervals in LAA and OEA soils, which demonstrated that the LAA can relatively represent the OEA. Determination of TOC content in LAA and OEA soil can intuitively reflect whether the difference of NPAHs bioac-bioav between two aging treatment groups is significant. The mean bioaccessibility of NPAHs in soil measured by TI-FOREhST (mean 20.6 %) is closer to the bioavailability measured by mouse model (mean 19.4 %), indicating that Tenax improved in vitro method is more reliable than traditional methods, to predict the bioavailability of NPAHs.

Assessment of the bioaccessibility of PAHs and other hazardous compounds present in recycled tire rubber employed in synthetic football fields

Recycled tire crumb rubber (RTCR) surfaces contain harmful and carcinogenic substances, which can be ingested by the users of these facilities, mainly athletes and children. In this work, the potential in-vitro oral bioaccessibility of eighteen polycyclic aromatic hydrocarbons (PAHs) from RTCR employed as infill in synthetic football fields was studied in human synthetic body fluids (saliva, gastric, duodenal and bile), prepared according the Unified Bioaccessibility Method. Solid-phase extraction (SPE) using commercial sorbents and a new green material based on cork (cork industry by-product) were used to isolate the bioaccessible PAHs before gas chromatography-tandem mass spectrometry analysis. The method was optimized and validated attending the analytical figures of merit. The feasibility of cork biosorbent for the extraction of the compounds was demonstrated, as well as the suitability of the UBM method to perform the digestion with good precision. The application to real samples collected from football fields demonstrated the presence of 17 of the 18 target PAHs in the biofluids. Most volatile PAHs such as NAP, ACY, ACE, FLU, PHN and ANC, achieved the highest bioaccessibility percentage levels. The carcinogenic B[a]P was detected in 75 % of the samples at concentrations up to 2.5 ng g^-1 (bioaccessible fraction). Children exposure assessment was carried out to identify potential risk. Other hazardous and environmentally problematic compounds such as N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPD-quinone), recently related with the dead of coho salmon, and hexamethoxymethylmelamine (HMMM), among others, were also detected. This is the first study in which the bioaccesibility from real crumb rubber samples of 15 out of the 16 PAHs considered as priority pollutants by the United States Environmental Protection Agency (EPA) and the presence of 6PPD-quinone and HMMM in the bioaccessible fractions is reported.

Bioaccessibility and Intestinal Transport of Tebuconazole in Table Grape by Using In Vitro Digestion Models

In this study, the effects of various digestive models, influencing factors and dietary supplements on the bioaccessibility of tebuconazole in table grapes were compared. The Caco-2 cell model was employed to reveal the transfer behavior of tebuconazole. The results indicated that digestion time is the main factor affecting bioaccessibility. With an increase in time, the tebuconazole in grapes was almost completely dissolved, with bioaccessibility reaching 98.5%, whereas dietary fiber reduced bioaccessibility. Tebuconazole undergoes carrier-free passive transport in permeable cells in the Caco-2 cell model. These findings have practical application value for correctly evaluating the harmful level of pollutants in the matrix to human body.

Enhanced toxicity effects of iron particles together with PFOA in drinking water

Iron particles present in drinking water distribution systems (DWDSs) could cause discoloration, while organic pollutants in DWDSs, such as perfluorooctanoic acid (PFOA), could be enriched by iron particles. However, little is known about the enhanced effects of PFOA and iron particles in DWDSs. To fill in these knowledge gaps, herein, iron-PFOA (FEP) particles were generated using residual chlorine as an oxidant in drinking water conditions and then separated into different sizes (ranging from small to large: FEP-S, FEP-M ，and FEP-L). FEP-S harbored the greatest cytotoxicity among the sizes. Interestingly, our data revealed that the PFOA released from FEP particles transformed into PFOS (perfluorooctane sulfonate) upon digestion in the gastrointestinal environment (GI), and FEP-L bored the strongest transformation, showing a toxicity profile that was distinct from that of FEP-S. Furthermore, mechanistic studies revealed that FEP per se should be accountable for the conversion of PFOA to PFOS dependent on the generation of hydroxyl radicals (·OH) in GI, and that FEP-L revealed the greatest production of ·OH. Collectively, these results showed how iron particles and PFOA could result in enhanced toxicity effects in drinking water: (i) PFOA could increase the toxicity of iron particles by reducing particle size and inducing higher generation of ·OH; (ii) iron particles could induce the transformation of PFOA into more toxic PFOS through digestion.

Probabilistic estimation and statuses of total, bioaccessible and inorganic arsenic accumulation in commercial white and brown rice in Thailand

Arsenic (As) in rice is a crucial public health concern because it is a human carcinogen. This study was conducted to determine the actual As concentrations and estimate the probable range of As in rice. The status of As accumulation in rice was also determined. White (n=154) and brown (n=54) rice samples were collected over three crop years. The concentrations of As (total, bioaccessible and inorganic) were determined. The total As concentrations in white (0.088-0.295 mg/kg) and brown (0.119-0.517 mg/kg) rice were approximately 58.8% and 57.4% higher than the Codex standards, respectively. However, the bioaccessible and inorganic As in both types of rice were lower than the standards for both rice types. Regarding the classifications of As accumulation (low, normal, high and unusually high), the actual As concentrations found in the rice samples were either in the normal range or a high concentration of As.

Mimicking human ingestion of microplastics: Oral bioaccessibility tests of bisphenol A and phthalate esters under fed and fasted states

Notwithstanding the fact that microplastic fragments were encountered in the human stool, little effort has been geared towards elucidating the impact of chemical additives upon the human health. In this work, standardized bioaccessibility tests under both fasting and fed conditions are herein applied to the investigation of human oral bioaccessibility of plastic additives and monomers (i.e. eight phthalate esters (PAEs) and bisphenol A (BPA)) in low-density polyethylene (LDPE) and polyvinyl chloride (PVC) microplastics. The generation of phthalate monoesters is evaluated in the time course of the bioaccessibility tests. Maximum gastric and gastrointestinal bioaccessibility fractions are obtained for dimethyl phthalate, diethyl phthalate and BPA, within the range of 55-83%, 40-68% and 37-67%, respectively, increasing to 56-92% and 41-70% for dimethyl phthalate and diethyl phthalate, respectively, whenever their hydrolysis products are considered. Bioaccessibility fractions of polar PAEs are dependent upon the physicochemical characteristics of the microplastics, with greater bioaccessibility for the rubbery polymer (LDPE). With the method herein proposed, oral bioaccessible pools of moderately to non-polar PAEs can be also accurately assessed for risk-assessment explorations, with values ranging from 1.8% to 32.2%, with again significantly larger desorption percentages for LDPE. Our results suggested that the highest gastric/gastrointestinal bioaccessibility of the eight PAEs and BPA is reached under fed-state gastrointestinal extraction conditions because of the larger amounts of surface-active biomolecules. Even including the bioaccessibility factor within human risk assessment/exposure studies to microplastics, concentrations of dimethyl phthalate, di-n-butyl phthalate and BPA exceeding 0.3% (w/w) may pose severe risks after oral uptake in contrast to the more hydrophobic congeners for which concentrations above 3% (w/w), except for diethylhexyl phthalate, would be tolerated.

Mechanisms Underlying the Impacts of Lipids on the Diverse Bioavailability of Per- and Polyfluoroalkyl Substances in Foods

Food is a major source of human exposure to per- and polyfluoroalkyl substances (PFASs), yet little is known about their bioavailability in food matrices. Here, the relative bioavailability (RBA) of PFASs in foods was determined using an in vivo mouse model. Pork, which had the highest lipid content, exhibited the greatest effect on bioavailability by increasing the RBAs of perfluoroalkyl acids (PFAAs) while reducing those of fluorotelomer phosphate diesters (diPAPs). During intestinal digestion of lipids, the bioaccessibility of PFAAs increased due to their greater partition into the stable mixed micelles. However, diPAPs were more likely to partition into the undigested oil phase due to their strong hydrophobicity. Both in vitro incubation and molecular docking results indicated that the PFAAs exhibited stronger binding affinities with mouse blood chylomicrons (CMs) than with diPAPs. Collectively, both lipid digestion in the intestine and the carrier effect of CMs played important roles in modulating the bioavailability of PFASs in food. More attention should be given to further evaluating the health risks of PFASs associated with the intake of high-lipid foods.

Evaluating the adsorption performance of Tenax TA® in different containers: An isolation tool to study the bioaccessibility of nitro-PAHs in spiked soil

The improved in vitro gastrointestinal simulation methods, with the addition of the adsorption sink, are considered as a promising tool for predicting the bioaccessibility of contaminants. However, the problem associated with the recovery of the adsorption sink from the complex matrix needs more understand. Although previous studies tried to solve this shortcoming by using the containers (a vessel to hold the adsorption sink), there is no systematic comparison study on the impact of containers on bioaccessibility till now, especially for nitro-polycyclic aromatic hydrocarbons (nitro-PAHs). In order to understand the problem, commonly used containers in previous studies (dialysis bags and stainless-steel screen) were selected and deployed in the Fed Organic Estimation Human Simulation Test (FOREhST) method to compare the effects of these containers on the bioaccessibility of nitro-PAHs desorbed from the five different types of soils into the gastrointestinal fluid (GIF). Results showed that in order to maintain a constant sorptive gradient for the high molecular weight (MW) nitro-PAHs, 0.25 g of Tenax TA® were required in FOREhST. Compared with Tenax TA® encapsulated in dialysis bag (Tenax-EDBG), the use of Tenax TA® encapsulated in dissolution basket (Tenax-EDBT) significantly increased the bioaccessibility of nitro-PAHs in the soil from 5.6-31.4% to 17.2-70.6%, due to the better diffusion performance. The bioaccessibility of nitro-PAHs by FOREhST extraction with Tenax-EDBT showed a significant negative correlation with soil total organic carbon (TOC), whereas a weak correlation with pH. This study provides the researchers with a more standardized in vitro method to quantify the bioaccessibility of PAHs and their derivatives in soil.

Coupling polydimethylsiloxane vials with a physiologically based extraction test to predict bioavailability of hydrophobic organic contaminants in soils

As alternatives to in vivo assays, physiologically based in vitro methods have been developed to measure bioaccessibility of hydrophobic organic contaminants (HOCs) in soils. However, bioaccessibility can usually be underestimated since in vitro tests fail to provide sufficient affinity for HOCs. Sorption sink was therefore included to simulate intestinal cell absorption and to promote the mobilization of HOCs from soils. In this study, polydimethylsiloxane (PDMS) vials, widely used as passive dosing, were introduced as a sorption sink to improve the performance of physiologically based extraction test (PBET). The bioaccessibility of PCBs (representatives of HOCs) in 13 lab-spiked soils measured by PBET coupled with PDMS vials ranged from 56.5 ± 2.7% to 109.3 ± 1.5%. Correlation was conducted between the bioaccessibility and relative bioavailability (RBA) of PCBs assessed using an in vivo mouse model. A significant correlation (p < 0.001, R² = 0.72, slope = 0.85 ± 0.16) was observed between in vitro and in vivo data, indicating that the proposed method here can be a robust in vitro method to predict PCB RBA in soils. The accuracy of this novel method was further shown by extracting one field contaminated soil with environmental relevant levels of PCBs. The relative standard deviation of bioaccessibility measured by PBET with PDMS vials was 1.2-9.8%, and much lower than those by PBET alone with values of 17.1-63.6%. In addition, the PDMS vials can be reusable as sorption sink, and no significant variation (p = 0.44) in PCB bioaccessibility was observed among 5 cycles of extracting soils with PBET coupled with PDMS vials. Due to the high sorption capacity of PDMS and flexibility of PDMS mass used for vials, the novel method here is expected to be applicable in soils with a wide range of contamination levels.

Human health risks estimations from polycyclic aromatic hydrocarbons in serum and their hydroxylated metabolites in paired urine samples

Polycyclic aromatic hydrocarbons (PAHs) are compounds with two or more benzene rings whose hydroxylated metabolites (OH-PAHs) are excreted in urine. Human PAH exposure is therefore commonly estimated based on urinary OH-PAH concentrations. However, no study has compared PAH exposure estimates based on urinary OH-PAHs to measurements of PAH levels in blood samples. Estimates of PAH exposure based solely on urinary OH-PAHs may thus be subject to substantial error. To test this hypothesis, paired measurements of parent PAHs in serum and OH-PAHs in urine samples from 480 participants in Guangzhou, a typical developed city in southern China, were used to investigate differences in the estimates of human PAH exposure obtained by sampling different biological matrices. The median PAH concentration in serum was 4.05 ng mL^-1, which was lower than that of OH-PAHs in urine (8.33 ng mL^-1). However, serum pyrene levels were significantly higher than urinary levels of its metabolite 1-hydroxypyrene. Concentrations of parent PAHs in serum were not significantly correlated with those of their metabolites in urine with the exception of phenanthrene, which exhibited a significant negative correlation. Over 28% of the participants had carcinogenic risk values above the acceptable cancer risk level of 10^-6. Overall, estimated human exposure and health risks based on urinary 1-hydroxypyrene levels were only 13.6% of those based on serum pyrene measurements, indicating that estimates based solely on urine sampling may substantially understate health risks due to PAH exposure.

Nanocellulose-Based Materials for Water Treatment: Adsorption, Photocatalytic Degradation, Disinfection, Antifouling, and Nanofiltration

Nanocelluloses are promising bio-nano-materials for use as water treatment materials in environmental protection and remediation. Over the past decades, they have been integrated via novel nanoengineering approaches for water treatment processes. This review aims at giving an overview of nanocellulose requirements concerning emerging nanotechnologies of waster treatments and purification, i.e., adsorption, absorption, flocculation, photocatalytic degradation, disinfection, antifouling, ultrafiltration, nanofiltration, and reverse osmosis. Firstly, the nanocellulose synthesis methods (mechanical, physical, chemical, and biological), unique properties (sizes, geometries, and surface chemistry) were presented and their use for capturing and removal of wastewater pollutants was explained. Secondly, different chemical modification approaches surface functionalization (with functional groups, polymers, and nanoparticles) for enhancing the surface chemistry of the nanocellulose for enabling the effective removal of specific pollutants (suspended particles, microorganisms, hazardous metals ions, organic dyes, drugs, pesticides fertilizers, and oils) were highlighted. Thirdly, new fabrication approaches (solution casting, thermal treatment, electrospinning, 3D printing) that integrated nanocelluloses (spherical nanoparticles, nanowhiskers, nanofibers) to produce water treatment materials (individual composite nanoparticles, hydrogels, aerogels, sponges, membranes, and nanopapers) were covered. Finally, the major challenges and future perspectives concerning the applications of nanocellulose based materials in water treatment and purification were highlighted.