Microplastics in the Black Sea sediments

In situ surface-enhanced Raman spectroscopy for the detection of nanoplastics: A novel approach inspired by the aging of nanoplastics

Nanoplastics (NPs) present a hidden risk to organisms and the environment via migration and enrichment. Detecting NPs remains challenging because of their small size, low ambient concentrations, and environmental variability. There is an urgency to exploit detection approaches that are more compatible with real-world environments. Herein, this study provides a surface-enhanced Raman spectroscopy (SERS) technique for the in situ reductive generation of silver nanoparticles (Ag NPs), which is based on photoaging-induced modifications in NPs. The feasibility of generating Ag NPs on the surface of NPs was derived by exploring the photoaging mechanism, which was then utilized to SERS detection. The approach was applied successfully for the detection of polystyrene (PS), polyvinyl chloride (PVC), and polyethylene terephthalate (PET) NPs with excellent sensitivity (e.g., as low as 1 × 10-6 mg/mL for PVC NPs, and an enhancement factor (EF) of up to 2.42 × 105 for small size PS NPs) and quantitative analytical capability (R2 > 0.95579). The method was successful in detecting NPs (PS NPs) in lake water. In addition, satisfactory recoveries (93.54-105.70 %, RSD < 12.5 %) were obtained by spiking tap water as well as lake water, indicating the applicability of the method to the actual environment. Therefore, the proposed approach offers more perspectives for testing real environmental NPs.

Microplastics in water resources: Global pollution circle, possible technological solutions, legislations, and future horizon

Beneath the surface of our ecosystems, microplastics (MPs) silently loom as a significant threat. These minuscule pollutants, invisible to the naked eye, wreak havoc on living organisms and disrupt the delicate balance of our environment. As we delve into a trove of data and reports, a troubling narrative unfolds: MPs pose a grave risk to both health and food chains with their diverse compositions and chemical characteristics. Nevertheless, the peril extends further. MPs infiltrate the environment and intertwine with other pollutants. Worldwide, microplastic levels fluctuate dramatically, ranging from 0.001 to 140 particles.m-3 in water and 0.2 to 8766 particles.g-1 in sediment, painting a stark picture of pervasive pollution. Coastal and marine ecosystems bear the brunt, with each organism laden with thousands of microplastic particles. MPs possess a remarkable ability to absorb a plethora of contaminants, and their environmental behavior is influenced by factors such as molecular weight and pH. Reported adsorption capacities of MPs vary greatly, spanning from 0.001 to 12,700 μg·g-1. These distressing figures serve as a clarion call, demanding immediate action and heightened environmental consciousness. Legislation, innovation, and sustainable practices stand as indispensable defenses against this encroaching menace. Grasping the intricate interplay between microplastics and pollutants is paramount, guiding us toward effective mitigation strategies and preserving our health ecosystems.

Analysing micro- and nanoplastics with cutting-edge infrared spectroscopy techniques: a critical review

The escalating prominence of micro- and nanoplastics (MNPs) as emerging anthropogenic pollutants has sparked widespread scientific and public interest. These minuscule particles pervade the global environment, permeating drinking water and food sources, prompting concerns regarding their environmental impacts and potential risks to human health. In recent years, the field of MNP research has witnessed the development and application of cutting-edge infrared (IR) spectroscopic instruments. This review focuses on the recent application of advanced IR spectroscopic techniques and relevant instrumentation to analyse MNPs. A comprehensive literature search was conducted, encompassing articles published within the past three years. The findings revealed that Fourier transform infrared (FTIR) spectroscopy stands as the most used technique, with focal plane array FTIR (FPA-FTIR) representing the cutting edge in FTIR spectroscopy. The second most popular technique is quantum cascade laser infrared (QCL-IR) spectroscopy, which has facilitated rapid analysis of plastic particles. Following closely is optical photothermal infrared (O-PTIR) spectroscopy, which can furnish submicron spatial resolution. Subsequently, there is atomic force microscopy-based infrared (AFM-IR) spectroscopy, which has made it feasible to analyse MNPs at the nanoscale level. The most advanced IR instruments identified in articles covered in this review were compared. Comparison metrics encompass substrates/filters, data quality, spatial resolution, data acquisition speed, data processing and cost. The limitations of these IR instruments were identified, and recommendations to address these limitations were proposed. The findings of this review offer valuable guidance to MNP researchers in selecting suitable instrumentation for their research experiments, thereby facilitating advancements in research aimed at enhancing our understanding of the environmental and human health risks associated with MNPs.

Recycling and Degradation of Polyamides

As one of the five major engineering plastics, polyamide brings many benefits to humans in the fields of transportation, clothing, entertainment, health, and more. However, as the production of polyamide increases year by year, the pollution problems it causes are becoming increasingly severe. This article reviews the current recycling and treatment processes of polyamide, such as chemical, mechanical, and energy recovery, and degradation methods such as thermal oxidation, photooxidation, enzyme degradation, etc. Starting from the synthesis mechanism of polyamide, it discusses the advantages and disadvantages of different treatment methods of polyamide to obtain more environmentally friendly and economical treatment schemes. Finding enzymes that can degrade high-molecular-weight polyamides, exploring the recovery of polyamides under mild conditions, synthesizing environmentally degradable polyamides through copolymerization or molecular design, and finally preparing degradable bio-based polyamides may be the destination of polyamide.

Microplastic release and sulfate reduction response in the early stage of a simulated landfill

Landfills are essential facilities for treating and disposing municipal solid waste. They emit sulfur-containing odors and serve as an important sink for a new type of pollutant called microplastics (MPs). This study focused on the initial stage of anaerobic degradation to establish the relationship between the release of MPs and odor generation. Our findings show the rapid release of MPs into the leachate in the early stage of landfill and their predominant accumulation in the leachate sediment. The circulating leachate contained 1.45 times higher concentrations of MPs than the noncirculating leachate, with a peak concentration of 39 items·L-1. In addition, fragmentation of MPs occurred. The percentage of MPs with particle sizes of 2.5-5 mm decreased from 66.70 % to 22.32 %, while those measuring 0.1-0.5 mm increased by 33.12 %. A positive correlation was observed between MP release and sulfate reduction. Although leachate circulation increased the release of MPs, it also reduced the overall release time and total amount of MPs exported from the landfill. Compared with the initial landfill waste, the leachate operation mode, regardless of circulation, resulted in a 6.15-8.93-fold increase in MP release. These findings provide a valuable foundation for the simultaneous regulation of traditional pollutant odor and new pollutants (MPs) in landfills.

A promising method for fast identification of microplastic particles in environmental samples: A pilot study using fluorescence lifetime imaging microscopy

Microplastic pollution of the environment has been extensively studied, with recent studies focusing on the prevalence of microplastics in the environment and their effects on various organisms. Identification methods that simplify the extraction and analysis process to the point where the extraction can be omitted are being investigated, thus enabling the direct identification of microplastic particles. Currently, microplastic samples from environmental matrices can only be identified using time-consuming extraction, sample processing, and analytical methods. Various spectroscopic methods are currently employed, such as micro Fourier-transform infrared, attenuated total reflectance, and micro Raman spectroscopy. However, microplastics in environmental matrices cannot be directly identified using these spectroscopic methods. Investigations using frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) to identify and differentiate plastics from environmental materials have yielded promising results for directly identifying microplastics in an environmental matrix. Herein, two artificially prepared environmental matrices that included natural soil, grass, wood, and high-density polyethylene were investigated using FD-FLIM. Our first results showed that we successfully identified one plastic type in the two artificially prepared matrices using FD-FLIM. However, further research must be conducted to improve the FD-FLIM method and explore its limitations for directly identifying microplastics in environmental samples.

Distribution of microplastics in bathyal- to hadal-depth sediments and transport process along the deep-sea canyon and the Kuroshio Extension in the Northwest Pacific

Understanding microplastic (MP) behavior in oceans is crucial for reducing marine plastic pollution. However, the complex process underlying MP transportation to the deep seafloor remains unknown despite the deep sea being considered its major sink. We focused on MP distribution in Sagami Bay (adjacent to highly populated areas of Japan), the plate triple junction connected through the Sagami Trough, and the abyssal plain immediately below the Kuroshio Extension. We observed the highest number of MPs in the abyssal stations, more than previously reported. The polymer types and aspect ratio of MPs in the abyssal stations significantly differed from those in the bathyal/hadal stations. The study suggests that MPs accumulated in the open ocean surface layer sink to the abyssal plains immediately below it, while MPs from land sources accumulate in the bathyal depth and are transported to the hadal depth near the coast through turbidity currents along the submarine canyon.

Current trends and challenges in the analysis of marine environmental contaminants by isotope ratio mass spectrometry

An increasing number of organic and inorganic pollutants are being detected in the marine environment, posing a severe threat to the ecosystem and human health, even in trace concentrations. Isotope ratio mass spectrometry (IRMS) is one of the critical methods for determining the origin and fate of environmental pollutants and characterising their transformation processes. It has been used for a relatively long time for ecological monitoring of some well-studied industrial hydrocarbons at contaminated sites. However, the method still faces many analytical challenges. This review provides a comprehensive overview of recent technical advances concerning IRMS analysis of various contaminants and discusses typical pitfalls encountered in marine environment analysis. Particular attention is given to the study of sampling techniques and sample preparation for examination, often the keys to successful research given the complexity of marine matrices and the diverse and numerous nature of contaminants. Prospects for developing IRMS to monitor pollution sources and pollutant transformation in the marine environment are outlined.

Longitudinal and vertical distribution of microplastics in various pipe scales in an operating drinking water distribution system

Microplastics (MPs) are ingested by humans through the daily consumption of drinking water. Pipe scales are recognized as important sites of MPs occurrence in the drinking water distribution system (DWDS). Despite extensive research on drinking water, no study has been conducted to investigate the distribution of MPs in pipe scales within an operational DWDS. The underground placement of DWDSs brings challenges for sampling pipe scales. In this study, 5 tap water and 16 pipe scales samples were collected from a typical DWDS. The analysis of MPs abundance in these 21 samples filled the data gap in the distribution of MPs in both pipe scales and tap water along the DWDSs. MPs were detected in all water samples (1.74-20.88 MPs/L) and pipe scales samples (0.03-3.48 MPs/cm2). In tap water, MPs abundance increased abruptly in the stagnant-slow flow region and reached the maximum value (20.88 MPs/L), even surpassing the abundance in raw water (6.42 MPs/L). In the pipe scales, MPs abundance decreased from the upstream to downstream of DWDS and was associated with the heavy metal concentration. MPs smaller than 150 µm accounted for 91.6% of the tap water (21-971 µm) and pipe scales (20-2055 µm). The abundance of MPs showed a logarithmic increase as the size decreased. The proportion of MPs fibers in tap water was lower than that in pipe scales. A total of 35 MPs polymers were detected, with 34 polymers in pipe scales and 26 polymers in tap water. In terms of abundance, polyethylene terephthalate (50.0%) was the dominant polymer in pipe scales, while polyamide (70.3%) was the dominant polymer in tap water. Regarding detection rate, polyamide was detected in all 21 samples, followed by polyurethane in 19 samples. The distribution of MPs along the longitudinal direction of the DWDS was correlated with heavy metal. While the distribution of MPs in the vertical direction of large diameter pipe scales was dependent on their sizes, and densities. The greatest abundance, size and density of MPs were detected at the bottom 120-degree.

Microplastics in the Gulf of Guinea: An analysis of concentrations and distribution in sediments, gills, and guts of fish collected off the coast of Ghana

Microplastics (MPs, <5 mm) accumulate in marine environments, impacting marine organism health. This study examined MPs in sediment and two pelagic fish species (S. maderensis and I. africana) in Ghana's Gulf of Guinea. The study found an average concentration of 0.144 ± 0.061 items/g (dry weight) in the sediment, with pellets and transparent particles being the most common types. The concentration of MPs in contaminated fish ranged from 8.35 to 20.95, with fibers and pellets being the most abundant plastic-type in fish. Individual organ concentrations of MPs varied. In fish gills, concentrations ranged from 1 to 26 MPs/individual for I. africana and 1-22 MPs/individual for S. maderensis. Concentrations in the fish guts ranged from 1 to 29 MPs/individual for I. africana and 2-24 MPs/individual for S. maderensis. Results from the study highlight the importance of both gills and guts as important organs in terms of microplastic contamination and emphasize the significance of monitoring microplastic contamination in fish gills and guts. This offers valuable insight into the impact of MPs on the marine environment and human health.

Spatio-temporal distribution of microplastic pollution in surface sediments along the coastal areas of Istanbul, Turkey

Microplastics (MPs) have become prevalent in various environmental compartments, including air, water, and soil, attracting attention as significant pollutant parameters. This study investigated the prevalence of MP pollution in surface sediments along Istanbul's Marmara Sea, encompassing the megacity and the Bosphorus. A comprehensive sampling approach was employed, covering 43 stations across four seasons and depths ranging from 5 to 70 m. The objective was to assess the impact of terrestrial, social, and industrial activities on MPs. The average concentrations varied per season, with fall, winter, spring, and summer values recorded as 2000 ± 4100, 1600 ± 3900, 4300 ± 12,000, and 9500 ± 20,300 particles/kg-DW. The study identified river stations in the Golden Horn and sea discharge locations as hotspots for high concentrations. Notably, the dominant shape shifted from fibers in fall, winter, and spring to fragments during summer, coinciding with mucilage occurrences. The study identified 11 different polymers, with polyethylene (44 %) and polypropylene (31 %) being the most common.

Accumulation of polystyrene nanoplastics and triclosan by a model tooth-carp fish, Aphaniops hormuzensis (Teleostei: Aphaniidae)

The presence and effects of nanoplastics (NPs; <1 μm) in the aquatic environment are a growing concern. In this study, a model tooth-carp fish, Aphaniops hormuzensis, has been exposed to different concentrations of fluorescent polystyrene nanoplastics (PS-NP) in its diet (up to 5 mg kg-1) over periods of 28 d and the particle accumulation in different tissues determined. Accumulation was observed in both digestive and non-digestive organs, with concentrations greater in the gut, liver and gill (up to 400 μg kg-1 dw) than in the skin and muscle (<180 μg kg-1 dw), but no dependency on exposure time or dose was evident. The presence of the organic contaminant, triclosan (TCS), in the diet and at concentrations up to 0.5 μg kg-1 did not affect PS-NP uptake by A. hormuzensis, while TCS accumulation in the whole body increased with time (up to 10 μg kg-1) and, likewise, appeared to be unaffected by the presence of PS-NPs. These observations suggest that the two contaminants do not interact with each other or that any interactions have no impact on accumulation. The results of this study add to the growing body of evidence that NPs can be translocated by aquatic organisms after ingestion, and reveal that, for the species and conditions employed, nanoplastics are accumulated more readily than a widely used organic chemical.

Prevalence of microplastics in commonly consumed fish species of the river Old Brahmaputra, Bangladesh

Microplastics (MPs) are pervasive in aquatic environments, but inland waterbodies (rivers and floodplains) have received much less attention. The present study assesses the incidence of MPs in the gastrointestinal tracts of five commercially important edible fish species-two column feeders (n = 30) and three benthivores (n = 45) from upstream, midstream, and downstream of the Old Brahmaputra river in north-central Bangladesh. MPs were detected in 58.93% of fish, with the highest level in freshwater eel, Mastacembelus armatus (10.31 ± 0.75/fish). Fibers (49.03%) and pellets (28.02%) were the most frequent MPs. Nearly 72% MPs were smaller than 1 mm, and 50.97% were black. FTIR analysis showed 59% polyethelene (PE), followed by polyamide (40%) and unidentified (1%). MP ingestion was linked to fish size and weight, and a high incidence was recorded in the downstream river. Two omnivorous benthic fish ingest more MPs than others. The results corroborate the presence of MPs in the inland river and fish fauna and augment our understanding of heterogeneous MP uptake by fish.

Biomimetic Ag/ZnO@PDMS Hybrid Nanorod Array-Mediated Photo-induced Enhanced Raman Spectroscopy Sensor for Quantitative and Visualized Analysis of Microplastics

Microplastics are persistent pollutants that accumulate in the environment and can cause serious toxicity to mammals. At present, few technologies are able to quantitatively detect chemicals and provide morphological information simultaneously. Herein, we developed a dragonfly-wing-mimicking ZnO nanorod array decorated with AgNPs on polydimethylsiloxane (PDMS) as a surface-enhanced Raman spectroscopy (SERS) and photo-induced enhanced Raman spectroscopy (PIERS) substrate for trace analysis of microplastics. The Ag/ZnO@PDMS hybrid nanorod array endows the sensor with high sensitivity and signal repeatability (RSD ∼ 5.89%), ensuring the reliable quantitative analysis of microplastics. Importantly, when the noble metal-semiconductor substrate was pre-radiated with ultraviolet light, a surprising PIERS was attained, achieving an additional enhancement of 11.3-fold higher than the normal SERS signal. By combining the PIERS technology with the "coffee ring effect", the sensor successfully discerned microplastics of polyethylene (PE) and polystyrene (PS) at a trace level of 25 μg/mL even with a portable Raman device. It was capable of identifying PS microspheres in contaminated tap water, lake water, river water, and seawater with detection limits of 25, 28, 35, and 60 μg/mL, respectively. The recovery rates of PS microspheres in four water environments ranged from 94.8 to 102.4%, with the RSD ranging from 2.40 to 6.81%. Moreover, quantitative and visualized detection of microplastics was readily realized by our sensor. This portable PIERS sensor represents a significant step toward the generalizability and practicality of quantitative and visual sensing technology.

Abundance of microplastic in different coastal areas using Phragmatopoma caudata (Kroyer in Morch, 1863) (Polychaeta: Sabelariidae) as an indicator

Plastic debris has been reported in the marine environment since the '70s. These plastic materials are introduced into the marine environment in several sizes, one of them microplastics (MP), and they have drawn great interest and concern in the past decades. Consumption of MP can cause weight loss, feeding rate decrease, reproductive activity decrease, and several other negative effects. Ingestion of MPs has already been reported for some species of polychaetes but the use of these annelids in MP studies is still poorly reported. Costa et al. (2021) was the first study to investigate the capability of the reef-building polychaete Phragmatopoma caudata to incorporate microplastic in its colony's structures. This makes the colonies a reservoir of MP and thus they reflect the environment's quality regarding MP presence. Consequently, this specie becomes an important asset to MP pollution investigation in coastal areas. Therefore, this work aims to investigate the abundance of MPs on the coastline of Espírito Santo using P. caudata as an indicator of MP presence. For this, we collected samples of P. caudata colonies in 12 sampling sites along the Espírito Santo coast (three replicates at each site). These colony samples were processed to extract the MPs particles from the colony surface, its inner structure, and tissues from the individuals. These MPs were counted using a stereomicroscope and sorted according to their color and type (filament, fragment, and other). Statistical analysis was performed using GraphPad Prism 9.3.0. Significant values followed p < 0.05. We found MP particles in all 12 sampled beaches, configuring a pollution rate of 100 %. The number of filaments was notably greater than the number of fragments and others. The most impacted beaches were found inside the metropolitan region of the state. Finally, P. caudata is an efficient and trustable indicator of microplastic in coastal areas.

Distribution and characteristics of microplastics in sediment at representative dredged material ocean dumping sites, China

Dredged material ocean dumping activities are likely an important source of microplastics (MPs) in coastal areas but have received little attention globally. In this study, we investigated the spatiotemporal distribution and characteristics of MPs in sediments at eight dredged material dumping sites of China. MPs were separated from sediment through density flotation, and polymer types were identified using μ-FTIR. The results showed that the average MP abundance was 112.82 ± 109.68 items/kg d.w. The MPs were more abundant at nearshore dumping sites than at distant dumping sites. Dumping activities may be the main contributor of MPs to Site BD1, the farthest dumping site from shore, but only a minor source of MPs at the other dumping sites. The characteristics of MPs were dominated by transparent PET fibers <1 mm. Overall, sediments at the dumping sites exhibited relatively low to moderate concentrations of MPs in comparison to most other coastal sediments.

Stressors of emerging concern in deep-sea environments: microplastics, pharmaceuticals, personal care products and deep-sea mining

Although most deep-sea areas are remote in comparison to coastal zones, a growing body of literature indicates that many sensitive ecosystems could be under increased stress from anthropogenic sources. Among the multiple potential stressors, microplastics (MPs), pharmaceuticals and personal care products (PPCPs/PCPs) and the imminent start of commercial deep-sea mining have received increased attention. Here we review recent literature on these emerging stressors in deep-sea environments and discuss cumulative effects with climate change associated variables. Importantly, MPs and PPCPs have been detected in deep-sea waters, organisms and sediments, in some locations in comparable levels to coastal areas. The Atlantic Ocean and the Mediterranean Sea are the most studied areas and where higher levels of MPs and PPCPs have been detected. The paucity of data for most other deep-sea ecosystems indicates that many more locations are likely to be contaminated by these emerging stressors, but the absence of studies hampers a better assessment of the potential risk. The main knowledge gaps in the field are identified and discussed, and future research priorities are highlighted to improve hazard and risk assessment.

Seasonal monitoring of microplastic pollution in the Southeast Black Sea: An example of red mullet (Mullus barbatus) gastrointestinal tracts

This study investigated seasonal presence of microplastic (MP) in gastrointestinal tracts of red mullet (Mullus barbatus) sampled from the Southeast Black Sea Region. A total of 335 MPs were detected in 120 individuals. While the most MP was observed in the winter and autumn seasons, quite few MPs were found in the summer and spring seasons. MP size did not show significant difference among seasons. While all of the MPs in the autumn and spring and most of the MPs in the winter were fiber-shaped, most of the MPs in the summer were fragments. The most observed MP color for all seasons was white. While polymer structures did not show much variation in spring and summer, six different polymers were determined for both autumn and winter. In general, less MPs were detected during fishing ban period (summer) and the characteristic properties of the detected MPs suggest a MP pollution in the region due to intense fishing activities.

Potential translocation process and effects of polystyrene microplastics on strawberry seedlings

A growing body of concerns focuses on microplastics as an emerging threat to terrestrial soil-plant ecosystems, but few previous studies have concentrated on asexual plants. To fill this knowledge gap, we carried out a biodistribution study of polystyrene microplastics (PS-MPs) of different particle sizes in strawberry (Fragaria × ananassa Duch. cv. "Akihime") seedlings via the hydroponic cultivation method. Confocal laser scanning microscopy (CLSM) results indicated that both 100 and 200 nm PS-MPs entered the roots and were further translocated to the vascular bundle through the apoplastic pathway. Both PS-MP sizes were detected in the vascular bundles of the petioles after 7 d of exposure, indicating a xylem-based upward translocation pathway. After 14 d, continuous upward translocation of 100 nm PS-MPs was observed above the petiole, while 200 nm PS-MPs could not be directly observed in the strawberry seedlings. This means that the uptake and translocation of PS-MPs depended on the size of PS-MPs and appropriate timing. The significant influence of strawberry seedling's antioxidant, osmoregulation, and photosynthetic systems（p < 0.05）was presented at 200 nm PS-MPs than 100 nm PS-MPs. Our findings provide scientific evidence and valuable data for the risk assessment of PS-MP exposure in asexual plant systems such as strawberry seedlings.

Occurrence and distribution characteristics of aged microplastics in the surface water, sediment, and crabs of the aquaculture pond in the Yangtze River Delta of China

The artificial breeding of freshwater crabs in China has become the main source, accounting for 45.69 % of the total output in 2020. However, microplastics widely exist in ponds due to the addition of meals, and the aging and breakage of plastic tools, and people know little about the occurrence of microplastics in the environment and the tissues of crabs during the cultivation of crabs in ponds. In this study, the abundance and characteristics of microplastics in ponds and crabs were studied finely, and the types of microplastics produced by meals and tools and the aging degree of microplastics in different media were studied in a typical aquaculture experimental base in the Yangtze Estuary of China. After we digested all the samples, there were microplastics in the water, sediment, and inedible part of crabs and crab meals, mainly in fiber shape, with a particle size of 100~300μm, and they have a certain degree of aging. The abundance of microplastics in surface water ranges from 4.4 to 10.8 items/L, and that in sediment ranges from 28.6 to 54.3 items/100 g·dry weight sediments. The average abundance of microplastics in crabs was 23.9 ± 15.9 items/individual. The content of microplastics in crabs' intestinal tissue was the highest, followed by gills and hepatopancreas. At the same time, the microplastics found in crabs were positively correlated with crab body weight and negatively correlated with hepatopancreas index. The results show that in the process of artificial breeding pond feeding, microplastics will be released from the process of meals dissolving in water, and fall off due to wear and tear during the use of tools. Microplastics found in the water, sediments and the tissues of crabs were all aged. Humans have a risk of ingesting microplastics when they eat the tissues of nonedible parts of crabs.

Microplastics in coastal urban sediments: Discrepancies in concentration and character revealed by different approaches to sample processing

Intertidal, silty sediment samples have been collected from three coastal locations with different uses and anthropogenic signatures in the vicinity of Plymouth, southwest England, and analysed for microplastics (MPs) by two independent means. Firstly, MPs were counted and characterised directly on unprocessed dried sediment under a stereo microscope, and secondly MPs were isolated from sediment by flotation in ZnCl₂ solution and filtration before analysis. Direct counting resulted in average (± one standard deviation) numbers of MPs per g of dry sediment of 0.77 ± 0.16 at a marina-harbour, 0.58 ± 0.30 under a busy road bridge and 0.79 ± 0.43 adjacent to country parkland. After flotation and filtration, concentrations were reduced to 0.24 ± 0.11, 0.18 ± 0.06 and 0.48 ± 0.38 MP g^-1, respectively. Observations were attributed to hetero-aggregation of small fibres with settling sediment during flotation, and the presence of MPs (including paints) that were too dense to float or that had aggregated or agglomerated with denser sediment and construction material in situ. The findings have implications for the efficacy of flotation procedures, accurate estimations of MP concentrations in sediment and the representativeness of MPs by type, and inter-site comparisons of MPs that are widely reported in the literature.

Vertical and seasonal variations in biofilm formation on plastic substrates in coastal waters of the Black Sea

Plastic contamination of the marine environment is an increasing concern worldwide. Therefore, it is important to understand the kinetics of biofilms on plastics to study their behavior, fate, and transport pathways in the ocean. In this study, the vertical and seasonal variations in biofouling formation on transparent polyethylene terephthalate (PET) plastic fragments in the Southwest Crimea coastal waters of the Black Sea were investigated. Biofilms were identified in the transient light as 'dark spots' on the plastic surface, for which the numbers, size, and area were measured using specialized software. The rate of biofouling in the surface water layer was lower than those found in the middle and near-bottom water column, which could be due to a damaging effect of turbulent mixing on the biofilm. The highest rates of biofouling and diverse community were observed during the summer. The epibiotic assembly was represented by diatoms (11 taxa), dinoflagellates (3 taxa), green algae, filamentous cyanobacteria, small flagellates, and ciliates. Significant differences between the biofouling rates observed in different seasons made it difficult to estimate the period of time the plastic substrate has been in the marine environment. It was proposed to use the green alga Phycopeltis arundinacea (Montgn) De Tender et al., 2015 as a bioindicator to study the age of the biofouling community. Discoid thalli were identified at all stages of colonization of the plastic fragments in different seasons. Results obtained in this study demonstrate that biofouling organisms may be good model organisms in revealing age of biofilm formation and longevity of plastic debris in the ocean. Consequently, it is proposed that such biofouling organisms could be used as target species to monitor the biodegradation of plastic debris.

Protracted dynamicity of microplastics in the coastal sediment of the Southeast Black Sea

This study provided the first evaluation of microplastic abundance, features, risk assessment, and decade-changing status in sediment along the southeastern Black Sea coast. Sediment samples were collected from thirteen stations in the Southeast Black Sea in 2012 and 2022. >70 % of the detected microplastics had a length of up to 2.5 mm and consisted of fragments and fibers in shape. The average microplastic abundance in the sediment samples was 108 MP/kg. The composition in the sediment (particles/kg) was dominated by polyethylene (PE) (44.9 %), polyethylene terephthalate (PET) (27.2 %), and polypropylene PP (15.2 %). Remarkable results for contamination factors, polymeric risk assessment and contamination risk indices. The sharp rise in MPS highlighted the heavily populated stations and stream discharge locations. The data shed light on anthropogenic and basal microplastic pollution in the Southeast Black Sea, assisting in developing effective policies for preserving and managing the Black Sea environment.

Occurrence and risk assessment of microplastics in the Lhasa River-a remote plateau river on the Qinghai-Tibet Plateau, China

Microplastics (MPs) are ubiquitous in the aquatic environment and have received widespread attention worldwide as emerging pollutants. Urbanization and anthropogenic activities are the main sources of MPs in rivers; however, the MPs in plateau rivers with less human activities are not well understood. In this study, the pollution of MPs in the surface water and shore sediment of the Lhasa River from the Qinghai-Tibet Plateau was investigated, and a risk assessment was conducted. The abundance of MPs in the surface water and shore sediment of Lhasa River were 0.63 n/L and 0.37 n/g, respectively. MPs in surface water were mainly dominated by films (43.23%) and fibers (31.12%) in shape, transparent (54.25%) in color, and 0-0.5 mm (75.83%) in size, while MPs in the shore sediment were mainly fibers (43.69%) and fragments (36.53%), transparent (71.91%), and 0-0.5 mm (60.18%). PP and PE were the predominant polymer types, accounting for 44.55% and 30.79% respectively in the surface water and 32.51% and 36.01% respectively in the shore sediment. More notably, the polymer pollution index (H) of MPs in the Lhasa River was at hazard level III due to the high risk caused by PVC, but the pollution load index (PLI) was low at hazard level I. This study reveals that the remote river in the Qinghai-Tibet Plateau are polluted by MPs, and their potential risks to the vulnerable ecosystem deserve attention.

Occurrence and spatial distribution of microplastics in sediment and fish along the Persian Gulf-a case study: Bushehr Province, Iran

Microplastics (MPs) contamination in the marine environment is a global threat. The present study is the first to comprehensively investigate the MPs contamination in the marine environment in Bushehr province along the Persian Gulf. For this purpose, 16 stations were selected along the coast and 10 fish samples were collected. The results obtained from MPs in sediment samples indicate the mean abundance of MPs in different sediment samples was 57.19 Particles/Kg. The dominant MPs color in sediment samples was black, accounting for 47.54%, followed by white (36.07%). As for MPs in fish, the highest MPs digested in different fish samples were 9. In addition, over 83.3% of MPs observed in fishes were black followed by red and blue (6.67%). Overall, the presence of MPs in fish and sediment can be attributed to improper disposal of industrial effluents; an efficient measurement is required in order to improve the quality of the marine environment.

Decade of microplastic alteration in the southeastern black sea: An example of seahorse gastrointestinal tracts

Unconscious and excessive use of plastic supports the diversity and abundance of microplastics (MPs) in marine environments. As a result of MP exposure, organisms in the marine environment are faced with adverse scenarios up to death. In this study, ten-year MP composition was investigated in gastrointestinal tracts (GITs) of low-mobility seahorses (90 individuals per period) from the Southeastern Black Sea. Seahorse GITs sampled during both 2012 and 2022 contain 102 and 135 MP items, respectively. The number of MPs per unit individual seahorse and unit seahorse weight was higher in the 2022 period. On the other hands, no significant differences were observed between the MP lengths of both periods. The majority of MPs in both sample periods were materials shorter than 1000 μm. Of the eight found synthetic polymers, five belonged to the 2012 period, while seven were observed during the 2022 period. Additionally, the most abundant synthetic polymer for both periods is polyvinyl stearate (PVS). As a result, 43% of the total plastic material belonged to the 2012 period, while 57% was observed in the 2022 period. Considering both the diversity of polymers and the abundance of plastics, the region was adversely affected by plastic materials in the 2022 period.

Ingestion of microplastics and textile cellulose particles by some meiofaunal taxa of an urban stream

Microplastics (MPs) and textile cellulose are globally pervasive pollutants in freshwater. In-situ studies assessing the ingestion of MPs by freshwater meiofauna are few. Here, we evaluated MP and textile cellulose ingestion by some meiofaunal taxa and functional guilds of a first-order stream in the city of Florence (Italy) by using a tandem microscopy approach (fluorescence microscopy and μFTIR). The study targeted five taxa (nematodes, oligochaetes, copepods, ephemeropterans and chironomids), three feeding (scrapers, deposit-feeders, and predators), and three locomotion (crawlers, burrowers, and swimmers) guilds. Fluorescent particles related to both MPs and textile cellulose resulted in high numbers in all taxa and functional guilds. We found the highest number of particles in nematodes (5200 particles/ind.) and deposit-feeders (1693 particles/ind.). Oligochaetes and chironomids (burrowers) ingested the largest particles (medium length: 28 and 48 μm, respectively), whereas deposit-feeders ingested larger particles (medium length: 26 μm) than scrapers and predators. Pellets were abundant in all taxa, except for Chironomidae. Textile cellulose fibers were present in all taxa and functional guilds, while MP polymers (EVA, PET, PA, PE, PE-PP) differed among taxa and functional guilds. In detail: EVA and PET particles were found only in chironomids, PE particles occurred in chironomids, copepods and ephemeropterans, PA particles were found in all taxa except in nematodes, whereas particles made of PE-PP blend occurred in oligochaetes and copepods. Burrowers and deposit-feeders ingested EVA, PET, PA, PE and PE-PP, while crawlers and scrapers ingested PE and PA. Swimmers and predators ingested PE, PA and PE-PP. Our findings suggest a pervasive level of plastic and textile cellulose pollution consistent with an urban stream which propagates in the meiofaunal assemblage of the stream ecosystem.

Maritime pollution in the Indian Ocean after the MV X-Press Pearl accident

The MV X-Press Pearl marine debacle severely affected the marine environment in the Indian Ocean. The objective of this study is to monitor environmental pollution along the west coast of Sri Lanka. Beach sand samples were collected from 40 locations. Visual and microscopic observations, plastic pellets pollution index (PPI), and degradation effects of plastic nurdles were examined. Chemical and thermal characteristics were investigated using Inductively Coupled Plasma Mass Spectrometric analysis (ICP-MS) and Fourier Transform Infra-Red Spectroscopic analysis (FTIR) analyses, respectively. Cylindrical-shaped plastic nurdles (>0.2 cm in size) were observed in off-white (mainly), yellow, and black colours. The white colour plastic nurdles change to yellow at 240 °C and black at 300 °C. Epamulla (PPI = 1940-3364) and Sarakkuwa (PPI = 2158-3466) beaches were recognized as the most contaminated beaches during the initial sampling (i.e., after six to eight days of the explosion of the vessel). Well-rounded small plastic nurdles (i.e., after one year of the disaster) can indicate degradation effects. FTIR results confirm (i) plastic nurdles as low-density polyethylene (LDPE) and (ii) alteration of the chemical composition of nurdles at a low temperature of 60 °C. In this case, a significant amount of microplastics have been added to the environment under the influence of UV irradiation and abrasion against beach sand. In addition, the presence of heavy metals (e.g., arsenic, cadmium, lead, and copper) in swash zone sediments is a great threat to marine animals and plants. Consequently, the ingestion of microplastics and heavy metals would be increased in a wide range of marine organisms and can be bio-accumulated in humans through seafood and salt.

Synthesis, Characterization, and Soil Burial Degradation of Biobased Polyurethanes

There is an urgent need for developing degradable polymeric systems based on bio-derived and sustainable materials. In recent years, polyurethanes derived from castor oil have emerged due to the large availability and sustainable characteristics of castor oil. However, these polymers are normally prepared through tedious and/or energy-intensive procedures or using high volatile and/or toxic reagents such as volatile isocyanates or epoxides. Furthermore, poor investigation has been carried out to design castor oil derived polyurethanes with degradable characteristics or thorough specifically sustainable synthetic procedures. Herein, castor oil-derived polyurethane with more than 90% biomass-derived carbon content and enhanced degradable features was prepared through a simple, eco-friendly (E-factor: 0.2), and scalable procedure, employing a recently developed commercially available biomass-derived (61% bio-based carbon content) low-volatile polymeric isocyanate. The novel material was compared with a castor oil derived-polyurethane prepared with a commercially available fossil-based isocyanate counterpart. The different castor oil-derived polyurethanes were investigated by means of water uptake, soil burial degradation, and disintegration tests in compost. Characterization analyses, including thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and scanning electron microscopy (SEM), were carried out both prior to and after degradation tests. The results suggest potential applications of the degradable castor oil-derived polyurethane in different fields, such as mulch films for agricultural purposes.

First assessment of microplastic and artificial microfiber contamination in surface waters of the Amazon Continental Shelf

The composition and distribution of microplastics (MPs) in the Brazilian Amazon Continental Shelf surface waters are described for the first time. The study was conducted during the 2018 rainy and dry seasons, using 57 water samples collected with aluminum buckets and filtered through a 64-μm mesh. The samples were vacuum-filtered in a still-air box, and the content of each filter was measured, counted, and classified. A total of 12,288 floating MPs were retrieved; particles were present at all 57 sampling points. The mean MP abundance was 3593 ± 2264 items·m^-3, with significantly higher values during the rainy season (1500 to 12,967; 4772 ± 2761 items·m^-3) than in the dry season (323 to 5733; 2672 ± 1167 items·m^-3). Polyamides (PA), polyurethane (PU), and acrylonitrile butadiene styrene (ABS) were the most common polymers identified through Fourier Transform Infrared Spectroscopy (FTIR) analysis. Cellulose-based textile fibers were also abundant (~40%). Our results indicate that the Amazon Continental Shelf is contaminated with moderate to high levels of MPs; the highest abundances were recorded at stations near land-based sources such as river mouths and large coastal cities.

Distribution of microplastics in benthic sediments of Qinghai Lake on the Tibetan Plateau, China

Although several studies of microplastics (MPs) with size <5 mm in lake sediments focused on lakeshore areas, there have been no studies of distributions of MPs from lakeshores to the center of a lake. To test our hypothesis that MPs decrease from lakeshore to the center, a study was conducted on the largest brackish lake on the remote and high-altitude Tibetan Plateau, China. Abundances and characteristics of MPs in 14 samples of surface sediment collected from a river bay, a lake bay, and a lake central area were investigated. Distributions were influenced by river inflow, tourism, and minimal activity of humans, respectively around Qinghai Lake. The mean abundance of MPs in sediments of Qinghai Lake was 393 ± 457 items/kg, dry mass (dm). Based on the range of MP abundances in surface sediments of lakes worldwide, Qinghai Lake was classified as being moderately polluted with MPs. The dominant color, shape, size, and polymer type of MPs in sediments were transparent, fiber, 0.05-1 mm, and polypropylene, respectively. The river bay had a mean abundance of MPs two-fold greater than either the bay or central area of the lake. This indicates that the river catchment caused more pollution with MPs, while the central area of the lake was not a sink for MPs. Spatial trends of MPs in sediments from the shore to the center of the lake differed among areas, and were significantly related to wind, lake current, sedimentation rate, water- and sediment-properties, water depth, and proximity to land sources of MPs.

Microplastic occurrence in deep-sea fish species Alepocephalus bairdii and Coryphaenoides rupestris from the Porcupine Bank (North Atlantic)

Microplastic occurrence in marine biota has been reported in a wide range of animals, from marine mammals and seabirds to invertebrates. Commercial and shallow-water fish have been the subject of numerous works on microplastic ingestion, given their importance in human diet and accessibility. However, little is known about microlitter occurrence in fish species inhabiting the dark ocean, in the bathyal zone and there is a high degree of uncertainty about microplastic distribution in offshore areas and the deep sea. In this study, bathydemersal species Alepocephalus bairdii and Coryphaenoides rupestris from the Porcupine Bank caught between 985 and 1037 m depth were inspected for microdebris. The stomach contents were digested by the alkaline method plus ethanol addition to avoid clogging. A filament of Polyethylene Terephthalate (PET) was found in the stomach of a specimen of A. bairdii, representing 4% of the total sampled specimens of this species (i.e. prevalence in n = 25). However, when considering potential microplastics, the prevalence increased to 28% in both, A. bairdii and C. rupestris. This work provides the first baseline study of microplastic items in fish from such depths in the Atlantic and suggests these species might be used as biomonitors in future research.

Prevalence of small-sized microplastics in coastal sediments detected by multipoint confocal micro-Raman spectrum scanning

Microplastics have become global emerging issue and received widespread attention in recent years. Due to their chemical persistence, plastic particles can be broken into smaller items but accumulated for long time in the environment like sediment. However, limited by current detection technologies, the distribution and characteristics of small-sized microplastics in coastal sediment remain uncertain. In this study, we established a new method based on micro-Raman spectroscopy for detecting small-sized microplastics, namely multipoint confocal micro-Raman spectrum scanning (MCmRSS). The MCmRSS was first applied in detecting microplastics in the sediment samples collected from three bays of the East China Sea. The minimum size of microplastics was 4 μm and average microplastics concentration was 91 ± 55 items /g dry weight sediment, with fragment and polyethylene as the most common shape and polymer type, respectively. The spatial variation of microplastics was in accordance with the strength of coastal human activities and marine dynamics. In all the microplastic items, the small-sized ones (<10 μm) accounted for 67%; and the relationship between microplastic concentration and its size followed a power-exponential equation. Compared with previous studies, the number of microplastics in coastal sediments detected by the MCmRSS increased by 2 orders of magnitude, which was benefited from the advantages of multipoint scanning in the fixed identification areas and high resolution of micro-Raman spectrum. Our findings would summon the re-evaluation of the potential risks of small-sized microplastics in the coastal environment.

Microplastics across biomes in diadromous species. Insights from the critically endangered Anguilla anguilla

Microplastic pollution affects freshwater and marine biota worldwide, microplastics occurring even inside the organisms. With highly variable effects, from physical damage to toxicity of plastic compounds, microplastics are a potential threat to the biodiversity, community composition and organisms' health. This emerging pollutant could overstress diadromous species, which are exposed to both sea and river water in their life cycle. Here we have quantified microplastics in young European eel Anguilla anguilla, a critically endangered catadromous fish, entering three rivers in southwestern Bay of Biscay. River water, sediments and seawater were also analysed for microplastics. The microplastic type was identified using Fournier-Transform Infrared spectroscopy and then searched for their hazard potential at the European Chemical Agency site. Both riverine and sea microplastic pollution were predictors of eels' microplastic profile (types of microplastics by shape and colour): A. anguilla juveniles entering European rivers already carry some marine microplastics and acquire more from river water. Potentially hazardous plastic materials were found from eels, some of them dangerous for aquatic life following the European Chemical Agency. This confirms microplastics as a potential threat for the species. Between-rivers differences for microplastics profiles persistent over years highlight the convenience of analysing and preventing microplastics at a local spatial scale, to save diadromous species from this stressor. Since the origin of microplastics present in glass eels seems to be dual (continental + seawater), new policies should be promoted to limit the entry of microplastics in sea and river waters.

Fate of microplastics in deep-sea sediments and its influencing factors: Evidence from the Eastern Indian Ocean

Although microplastics (MPs) are known to be found in global oceans, their influencing factors and abundance in the deep sea remain largely unknown. Twenty-six surface sediment samples were collected in the deep basin of the Eastern Indian Ocean (EIO). This study showed that MPs abundance ranged from 30.30 particles/kg to 701.7 particles/kg, with an average of 170.5 ± 140.2 particles/kg. The MPs found in the sediment of the EIO mainly contain fragments and fibers, which account for 47.5% and 45.6%. The MPs were measured in a size range of 44-5000 μm, and the most frequently detected MPs in size of 200-500 μm. MPs were in various compositions, but most of them were found in rayon (62.2%) and polyester (25.7%). The spatial distribution of MPs in the sediments shows a decreasing trend from nearshore to the open sea. In the Bay of Bengal (BOB) and the coast of Sri Lanka (COSL), the abundance of MPs was relatively high, indicating that the spatial distribution of MPs is affected by land source input, river input, and anthropogenic activities. Principal component analysis indicated daily commodities and packaging applications/fishing accounted for 36.9% and 12.9% of the MPs occurrence in the EIO, respectively. Average MPs diversity indices for the BOB (0.87 ± 0.38), the COSL (0.64 ± 0.56), and the Eastern Indian Ocean Basin (EIOB) (0.60 ± 0.24) revealed the BOB had the most complicated MPs sources. In addition, we found that the abundance of MPs has no significant effect on organic carbon and sediment grain size. This study is the first report of MPs detection in the deep-sea sediment in the EIO and can provide a baseline of MPs pollution in this area.

Unprecedented marine microplastic contamination from the X-Press Pearl container vessel disaster

The objectives of the research was to assess the coastal pollution by plastic nurdles, pyrolitic debris, associated potential toxic elements (PTEs) concentrations and mitigatory efforts by the worst ever maritime accident of a chemical and plastic boarded container vessel; MV X-Press Pearl. Field sampling was carried out three times during May, June, and September 2021 at Sarakkuwa, Sri Lanka. Pellet pollution index (PPI) was determined to compare the degree of plastics pollution. Density separation (NaCl) followed by wet peroxide digestion for plastic separation and characterized by Fourier transform infrared spectroscopic, thermo gravimetric analysis and differential scanning calorimetric analysis. Sand and plastics samples were digested and analyzed for PTEs (Li, Mo, Cr, Pb, and Cu), are suspect to mix during disaster. Identified debris were mostly confirmed as low-density polyethylene, epoxy resins, olefin copolymers, aromatic polyamides, natural rubber, and polyethylene terephthalate. Sulfur contamination and physical erosion were observed in nurdles received in June and September. Calculated PPIs were 'high' for Sarakkuwa beach even in September with a very high pellet pollution degree (10.24 pellets per m²) compared to the control obtained from the same site in 2020 (1.6 pellets per m²). Input sand for the blue treatment facility was found as the extremely contaminated with Mo and Li with 239.71 and 1.69 mg/kg respectively other than microplastics. Blue treatment facility seemed effective in physical separation of microplastics from sand, however, it is an exhausting process due to continuous receive of microplastics from the waves and excavation of sea shore.

Effects of Microplastics on Microbial Community in Zhanjiang Mangrove Sediments

Microplastics are easily consumed by marine animals, thereby entering the food chain and endangering animal health. However, there are few studies focusing on the effects of microplastics in mangrove sediments on microbial communities. In order to study the influence of microplastics on microorganisms, microplastics and microorganisms were extracted from Zhanjiang (Guangdong Province, China) mangrove sediments and analyzed. The results showed that there were differences in Shannon and Simpson indices of the microbial community in microplastics (p < 0.05), and there were also differences between JG30_KF_CM45 and Natranaerovirga at the genus level, indicating that microplastics may affect the diversity and composition of microorganisms in sediments. In addition, FAPROTAX function prediction analysis showed that microplastics may affect the nitrification of microbial communities. The results from this study indicate that microplastics affected the diversity and richness of microorganisms in mangrove sediments, which provides an experimental basis for the relationship between microplastics and microorganisms.

Future microplastics in the Black Sea: River exports and reduction options for zero pollution

The Black Sea receives increasing amounts of microplastics from rivers. In this study, we explore options to reduce future river export of microplastics to the Black Sea. We develop five scenarios with different reduction options and implement them to a Model to Assess River Inputs of pollutaNts to seA (MARINA-Global) for 107 sub-basins. Today, European rivers draining into the Black Sea export over half of the total microplastics. In 2050, Asian rivers draining into the sea will be responsible for 34-46% of microplastic pollution. Implemented advanced treatment will reduce point-source pollution. Reduced consumption or more collection of plastics will reduce 40% of microplastics in the sea by 2050. In the optimistic future, sea pollution is 84% lower than today when the abovementioned reduction options are combined. Reduction options affect the share of pollution sources. Our insights could support environmental policies for a zero pollution future of the Black Sea.

Airborne microplastic concentrations and deposition across the Weser River catchment

Microplastic (MP) appears to be omnipresent in the atmosphere, raising concerns about dispersion across environmental compartments, ecological consequences and human health risks by inhalation. To date, data on the sources of atmospheric MP and deposition to river catchment areas are still sparse. We, therefore, took aerosol and total atmospheric deposition samples in the catchment area of the large German river Weser to estimate microplastic deposition fluxes (DFs) at six specific sites and airborne MP concentrations. Sampling in rural, suburban, and urban environments and wastewater treatment plants (WWTPs) was performed, aiming at a variation in airborne MP pollution and elucidating potential MP source areas. Aerosol samples were taken twice in April and October while monthly total deposition samples were collected over a period from March to October. Microplastics were detected in all analysed aerosol samples by Raman spectroscopy down to 4 μm, and in all 32 total deposition samples by μFT-IR down to 11 μm. Average MP number concentrations of 91 ± 47 m^-3 were found in aerosol samples. The measured total MP number DFs ranged between 10 and 367 N m^-2 day^-1 (99 ± 85 mean ± SD) corresponding to total deposition of 0.05 ± 0.1 kg ha^-1 per year and to an estimated 232 metric tons of plastic being deposited in the Weser River catchment annually. MP number DFs were higher in urban than rural sites. An effect of WWTPs on the MP abundance in air was not observed. Polypropylene, polyethylene, polyethylene terephthalate, polyvinyl chloride, polystyrene, and silicone fragments were found as the predominant polymer types in total deposition samples, while polyethylene particles dominated in aerosol samples. The results suggest that proximity to sources, especially to cities, increase the numbers of MP found in the atmosphere. It further indicates that atmospheric MP considerably contributes to the contamination of both aquatic and terrestrial habitats.

A review of plastic pollution in aquatic ecosystems of Turkey

Turkey is one of the major plastic pollution sources in the Mediterranean and the Black Sea. This review summarizes present information, data, and legislation on plastic pollution in Turkish aquatic ecosystems. According to results derived from reviewed studies, both macro- and microplastic pollutions were documented in Turkish aquatic ecosystems. Most of the studies on plastic pollution in Turkish waters were performed in the marine environment while only four were conducted in freshwater environments. Spatially, the majority of these studies, which were on levels in the marine environment, were conducted on the northeastern Mediterranean coasts of Turkey, especially Iskenderun and Mersin Bays. Additional studies were carried out on either the ingestion/presence/impact of microplastics by/to aquatic organisms or the entanglement of marine organisms in plastics. There were also studies assessing the microplastic content of commercial salt, and another has reported microplastic presence in traditional stuffed mussels sold in Turkish streets. Some studies were conducted on microplastic presence and/or their removal in wastewater treatment plants in Mersin, Adana, Mugla, and Istanbul cities. Macro- and microliter loading from a few Turkish rivers to the sea was also estimated. All these investigations indicate that Turkish aquatic environments have significant plastic pollution problems, which were also underlined by the legislative studies. The need for further studies in this field still exists, especially in freshwater environments.

Ingestion of microplastics by commercial fish species from the southern Black Sea coast

Microplastic (MP) contamination is a serious threat to today's marine life. Therefore, this study investigates MP ingestion in three commercial fish species (European anchovy Engraulis encrasicolus, whiting Merlangius merlangus, and red mullet Mullus barbatus) from the Turkish coast of the Black Sea. Ninety-five MPs were detected in all examined fish (371). Fiber forms were detected in the majority of cases based on the MP morphology. Polyethylene and polypropylene were the most dominant polymer type. The mean of ingested MPs was found as 0.15 ± 0.04, 0.28 ± 0.06, 0.40 ± 0.07 in anchovy, whiting and red mullet, respectively. The size of the MPs ranged from 118 μm and 4854 μm. The MP waste was detected in each species, and the highest MP amount was determined in the red mullet, which was significantly higher than European anchovy. The present study's data might be a baseline on the ecological risk assessment of MPs in the fish and future experimental studies on the fish species living in the Black Sea.

Hazardous contaminants in plastics contained in compost and agricultural soil

Macro-, meso- and microplastic (MAP, MEP, MP) occurrence in compost is an environmental issue whose extent and effects are not yet understood. Here, we studied the occurrence of MAPs, MEPs and MPs in compost samples, and the transfer of hazardous contaminants from plastics to compost and soil. MAPs/MEPs and MPs concentrations in compost were 6.5 g/kg and 6.6 ± 1.5 pieces/kg; from common recommendations for compost application, we estimated ∼4-23 × 10⁷ pieces MPs and 4-29 × 10⁴ g MAPs/MEPs ha^-1 per year ending into agricultural soils fertilized with such compost. Regarding contaminants, bis(ethylhexyl) phthalate, acetyl tributyl citrate, dodecane and nonanal were extracted in higher concentrations from plastics and plastic-contaminated compost than from compost where MAPs/MEPs had been removed prior to extraction and analysis. However, some contaminants were present even after MAPs/MEPs removal, ascribable to short- and long-term release by MAPs/MEPs, and to the presence of MPs. DEHP concentration was higher in soils where compost was applied than in fields where it was not used. These results, along with estimations of plastic load to soil from the use of compost, show that compost application is a source of plastic pollution into agricultural fields, and that plastic might transfer hazardous contaminants to soil.

Occurrence and Quantification of Natural and Microplastic Items in Urban Streams: The Case of Mugnone Creek (Florence, Italy)

The terrestrial environment is an important contributor of microplastics (MPs) to the oceans. Urban streams, strictly interwoven in the city network and to the MPs’ terrestrial source, have a relevant impact on the MP budget of large rivers and, in turn, marine areas. We investigated the fluxes (items/day) of MPs and natural fibers of Mugnone Creek, a small stream crossing the highly urbanized landscape of Florence (Italy) and ending in the Arno River (and eventually to the Tyrrhenian Sea). Measurements were done in dry and wet seasons for two years (2019–2020); stream sediments were also collected in 2019. The highest loads of anthropogenic particles were observed in the 2019 wet season (10⁹ items/day) at the creek outlet. The number of items in sediments increased from upstream (500 items/kg) to urban sites (1540 items/kg). Fibers were the dominant shape class; they were mostly cellulosic in composition. Among synthetic items, fragments of butadiene-styrene (SBR), indicative of tire wear, were observed. Domestic wastewater discharge and vehicular traffic are important sources of pollution for Mugnone Creek, especially during rain events. The study of small creeks is of pivotal importance to limit the availability of MPs in the environment.

Current status of microplastics pollution in the aquatic environment, interaction with other pollutants, and effects on aquatic organisms

Microplastics, as emerging pollutants, have received great attention in the past few decades due to its adverse effects on the environment. Microplastics are ubiquitous in the atmosphere, soil, and water bodies, and mostly reported in aqueous environment. This paper summarizes the abundance and types of microplastics in different aqueous environments and discusses the interactions of microplastics with other contaminants such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), antibiotics, and heavy metals. The toxicity of microplastics to aquatic organisms and microorganisms is addressed. Particularly, the combined toxic effects of microplastics and other pollutants are discussed, demonstrating either synergetic or antagonistic effects. Future prospectives should be focused on the characterization of different types and shapes of microplastics, the standardization of microplastic units, exploring the interaction and toxicity of microplastics with other pollutants, and the degradation of microplastics, for a better understanding of the ecological risks of microplastics.

The spatial and temporal changes of beach litter on Istanbul (Turkey) beaches as measured by the clean-coast index

Possible access routes of macro and mesoplastics, acting as the main sources of pollution in the coastal ecosystem, are examined as a case study on four beaches along the Istanbul coast. A total number of 3787 items belonging to 12 categories of debris types were collected as follows: macroplastics 47.8%; mesoplastics 9.2%; and others 43.0% such as paper pieces, glass pieces and metal beverage cans. Clean-coast and carbonyl indexes were also used to identify the level of cleanliness of the sampling sites. The clean-coast index revealed that all of the sample sites were categorized as extremely dirty. Moreover, carbonyl index results indicate that 35.7% of the samples were at a high oxidation level indicating that some of the particles relatively spend more time on beaches. The litter concentration and surface oxidation results were addressing issues that should be taken into consideration to improve litter management strategies of the beaches.

Occurrence of microplastics in commercial marine dried fish in Asian countries

The major risk of microplastics in marine environments is the bioaccumulation in marine organisms. Plastic ingestion by marine organisms has been investigated and recently more attention has been given to microplastics in seafood. However, it is seldom reported the occurrence of microplastics in marine commercial dried fish products available for human consumption. Here, we report the occurrence of microplastics in 14different marine dried fish products from seven Asian countries. Microplastics were observed in most dried fish, with fibers representing ~80% of the total-microplastics. The major plastic polymers, identified using Micro-Raman spectroscopy, included polyethylene (35%), polyethylene terephthalate (26%), polystyrene (18%), polyvinyl chloride (12%), and polypropylene (9%). The highest count, in either per individual (1.92 ± 0.12) or per gram of dried fish (0.56 ± 0.03), were found in Etrumeus micropus from Japan. Marine dried fish, which are typically eaten whole, may contribute to the ingestion of microplastics by humans, posing potential health risks especially in Asian countries. Further studies are needed to identify the occurrence of smaller sized microplastics and nanoplastics and their potential health impacts.

Spatio-temporal variation of microplastic pollution in the sediment from the Chukchi Sea over five years

Sediment has been considered as an important sink for microplastics (MPs), but there are limited reports about the spatial and temporal variability of MPs in sediment from the Arctic Ocean. Furthermore, understanding is lacking on the correlation between Arctic sea ice variation and MP abundance in sediment. This study aimed to assess the MP contamination in the sediment from the Chukchi Sea over five years through three voyages (in 2016, 2018, and 2020). The MP abundances in the sediments from the Chukchi Plateau and Chukchi Shelf over five years ranged from 33.66 ± 15.08 to 104.54 ± 28.07 items kg^-1 dry weight (DW) and 20.63 ± 6.71 to 55.64 ± 22.61 items kg^-1 DW, respectively. The MP levels from the Chukchi Sea were lower than those from the Eastern Arctic Ocean. Our findings suggest that the Chukchi Plateau is an accumulation zone for fibers related to fishing gear and textiles under the dual influence of the Pacific and Atlantic Ocean currents. However, the reduction of these fibers in the sediment from the Chukchi Shelf might be related to bottom currents, sediment resuspension, and biomass. Moreover, the MP abundance in the sediment from the Chukchi Sea was positively correlated with the reduction of Arctic sea ice, suggesting that the melting sea ice contributes to the increase in MP levels in the sediment. The increase in blue MPs from the Chukchi Plateau over time might be attributed to melting sea ice or intense fishing activity, whereas the increase of the smallest MPs in this region could be owing to the breakdown of larger plastics during long-distance transport or the easier settlement of smaller MPs. Further time-series investigations are urgently required to improve the understanding of the environmental fate and transport of MPs among the different Arctic environmental compartments.

Toxicity Study and Quantitative Evaluation of Polyethylene Microplastics in ICR Mice

The production, use, and waste of plastics increased worldwide, which resulted in environmental pollution and a growing public health problem. In particular, microplastics have the potential to accumulate in humans and mammals through the food chain. However, the toxicity of microplastics is not well understood. In this study, we investigated the toxicity of 10–50 μm polyethylene microplastics following single- and 28-day repeated oral administration (three different doses of microplastics of 500, 1000, and 2000 mg/kg/day) in ICR mice. For the investigation, we administered the microplastics orally for single- and 28-day repeated. Then, the histological and clinical pathology evaluations of the rodents were performed to evaluation of the toxicity test, and Raman spectroscopy was used to directly confirm the presence of polyethylene microplastics. In the single oral dose toxicity experiments, there were no changes in body weight and necropsy of the microplastics-treated group compared with that of controls. However, a histopathological evaluation revealed that inflammation from foreign bodies was evident in the lung tissue from the 28-day repeated oral dose toxicity group. Moreover, polyethylene microplastics were detected in the lung, stomach, duodenum, ileum, and serum by Raman spectroscopy. Our results corroborated the findings of lung inflammation after repeated oral administration of polyethylene microplastics. This study provides evidence of microplastic-induced toxicity following repeated exposure to mice.

Co-Exposure with an Invasive Seaweed Exudate Increases Toxicity of Polyamide Microplastics in the Marine Mussel Mytilus galloprovincialis

Plastic pollution and invasive species are recognised as pervasive threats to marine biodiversity. However, despite the extensive on-going research on microplastics’ effects in the biota, knowledge on their combination with additional stressors is still limited. This study investigates the effects of polyamide microplastics (PA-MPs, 1 mg/L), alone and in combination with the toxic exudate from the invasive red seaweed Asparagopsis armata (2%), after a 96 h exposure, in the mussel Mytilus galloprovincialis. Biochemical responses associated with oxidative stress and damage, neurotoxicity, and energy metabolism were evaluated in different tissues (gills, digestive gland, and muscle). Byssus production and PA-MP accumulation were also assessed. Results demonstrated that PA-MPs accumulated the most in the digestive gland of mussels under PA-MP and exudate co-exposure. Furthermore, the combination of stressors also resulted in oxidative damage at the protein level in the gills as well as in a significant reduction in byssus production. Metabolic capacity increased in both PA-MP treatments, consequently affecting the energy balance in mussels under combined stress. Overall, results show a potential increase of PA-MPs toxicity in the presence of A. armata exudate, highlighting the importance of assessing the impact of microplastics in realistic scenarios, specifically in combination with co-occurring stressors, such as invasive species.