A comprehensive review on sources, analysis and toxicity of environmental pollutants and its removal methods from water environment

Bio-electrochemical degradation of carbamazepine (CBZ): A comprehensive study on effectiveness, degradation pathway, and toxicological assessment

Recent attention on the detrimental effects of pharmaceutically active compounds (PhACs) in natural water has spurred researchers to develop advanced wastewater treatment methods. Carbamazepine (CBZ), a widely recognized anticonvulsant, has often been a primary focus in numerous studies due to its prevalence and resistance to breaking down. This study aims to explore the effectiveness of a bio-electrochemical system in breaking down CBZ in polluted water and to assess the potential harmful effects of the treated wastewater. The results revealed bio-electro degradation process demonstrated a collaborative effect, achieving the highest CBZ degradation compared to electrodegradation and biodegradation techniques. Notably, a maximum CBZ degradation efficiency of 92.01% was attained using the bio-electrochemical system under specific conditions: Initial CBZ concentration of 60 mg/L, pH level at 7, 0.5% (v/v) inoculum dose, and an applied potential of 10 mV. The degradation pathway established by identifying intermediate products via High-Performance Liquid Chromatography-Mass Spectrometry, revealed the complete breakdown of CBZ without any toxic intermediates or end products. This finding was further validated through in vitro and in vivo toxicity assays, confirming the absence of harmful remnants after the degradation process.

Neurotoxicity of Some Environmental Pollutants to Zebrafish

The aquatic environment encompasses a wide variety of pollutants, from plastics to drug residues, pesticides, food compounds, and other food by-products, and improper disposal of waste is the main cause of the accumulation of toxic substances in water. Monitoring, assessing, and attempting to control the effects of contaminants in the aquatic environment are necessary and essential to protect the environment and thus human and animal health, and the study of aquatic ecotoxicology has become topical. In this respect, zebrafish are used as model organisms to study the bioaccumulation, toxicity, and influence of environmental pollutants due to their structural, functional, and material advantages. There are many similarities between the metabolism and physiological structures of zebrafish and humans, and the nervous system structure, blood-brain barrier function, and social behavior of zebrafish are characteristics that make them an ideal animal model for studying neurotoxicity. The aim of the study was to highlight the neurotoxicity of nanoplastics, microplastics, fipronil, deltamethrin, and rotenone and to highlight the main behavioral, histological, and oxidative status changes produced in zebrafish exposed to them.

The quorum sensing SinI/R system contributes to cadmium immobilization in Ensifer adhaerens NER9 in the cadmium-contaminated solution

In this study, the cadmium (Cd)-tolerant Ensifer adhaerens strain NER9 with quorum sensing (QS) systems (responsible for N-acyl homoserine lactone (AHL) production) was characterized for QS system-mediated Cd immobilization and the underlying mechanisms involved. Whole-genome sequence analysis revealed that strain NER9 contains the QS SinI/R and TraI/R systems. Strains NER9 and the NER9∆sinI/R, NER9∆traI/R, and NER9∆sinI/R-traI/R mutants were constructed and compared for QS SinI/R and TraI/R system-mediated Cd immobilization in the solution and the mechanisms involved. After 24 h of incubation, strain NER9 significantly decreased the Cd concentration in the Cd-contaminated solution compared with the NER9∆sinI/R, NER9∆traI/R, and NER9∆sinI/R-traI/R mutants. The NER9∆sinI/R mutant had a greater impact on Cd immobilization and a lower impact on the activities of AHLs than did the NER9∆traI/R mutant. The NER9∆sinI/R mutant had significantly greater Cd concentrations and lower cell wall- and exopolysaccharide (EPS)-adsorbed Cd contents than did strain NER9. Furthermore, the NER9∆sinI/R mutant presented a decrease in the number of functional groups interacting with Cd, compared with strain NER9. These results suggested that the SinI/R system in strain NER9 contributed to Cd immobilization by mediating cell wall- and EPS-adsorption in Cd-containing solution.

Acid-activated corn silk as a promising phytosorbent for uptake of Malachite green and Cd (II) ion from simulated wastewater: equilibrium, kinetic and thermodynamic studies

Malachite green (MG) dye and cadmium metal ion are toxic pollutants that should be removed from aqueous environment. The recent study aimed to examine the adsorption behavior of MG dye and Cd (II) from wastewater onto low-cost adsorbent prepared by activating corn silk with nitric acid (ACS) and characterized by SEM, FTIR, XRD, BET and TGA. The optimum MG and Cd (II) adsorption was observed at pH 7 and pH 9 and maximum uptake of both pollutants was at 0.5 g dosage, 60 mins contact time and 20 mg/L initial concentration. The retention of dye and metal ion by the studied adsorbent was best fit to Langmuir isotherm and Pseudo-second order kinetics. The maximum monolayer coverage capacity of ACS for MG dye and Cd (II) ion was 18.38 mg/g and 25.53 mg/g, respectively. Thermodynamic studies predicted a spontaneous reaction with exothermic process for MG dye whereas an endothermic and spontaneous process was confirmed for Cd ion based on estimated parameters. The adsorption mechanism of MG dye and Cd (II) uptake was by combination of electrostatic interaction, pore diffusion, ion exchange, pie-pie attraction, hydrogen bonding, and complexation. The adsorbed pollutants were effectively desorbed with significant regeneration efficiency after successive five cycles that proved the potential of low-cost biosorbent for selective sequestration of cationic dye and divalent metal ion from effluents.

Potential of hospital wastewater treatment using locally isolated Chlorella sp. LH2 from cocoon wastewater

Chlorella sp. is able to grow and transform inorganic and organic contaminants in wastewater to create biomass. In the present study, Chlorella sp. LH2 isolated from cocoon wastewater was able to thrive in hospital wastewater, then remove nutrients and eliminate E. coli ATCC 8739. The results indicated that optimal cultivation conditions of Chlorella sp. LH2 in hospital wastewater were pH of 8, light:dark cycle of 16:8 at 30oC. The inhibitory effect of chlorination on algae growth was accompanied with the chlorine concentration. BOD5:COD ratio of 0.77 indicated biodegradability of hospital wastewater. The untreated and treated wastewatee samples were collected to investigated the nutrient removal efficiency after 10 days. Untreated and treated results were192 ± 8.62 mg/l 23.91 ± 2.19 mg/l for BOD5; 245 ± 9.15 mg/l and 47.31 ± 5.71 mg/l for COD. The treated value met the required standards for hospital wastewater treatment. The removal efficiency total nitrogen and total phosphorus were 68.64% and 64.44% after 10 days, respectively. Elimination of E. coli ATCC 8739 after 7 days by Chlorella sp. LH2 was 88.92%. The results of this study suggest the nutrients and pathogens removal potential of Chlorella sp. LH2 in hospital wastewater for further practical applications.

Biomimetic microfluidic chips for toxicity assessment of environmental pollutants

Various types of pollutants widely present in environmental media, including synthetic and natural chemicals, physical pollutants such as radioactive substances, ultraviolet rays, and noise, as well as biological organisms, pose a huge threat to public health. Therefore, it is crucial to accurately and effectively explore the human physiological responses and toxicity mechanisms of pollutants to prevent diseases caused by pollutants. The emerging toxicological testing method biomimetic microfluidic chips (BMCs) exhibit great potential in environmental pollutant toxicity assessment due to their superior biomimetic properties. The BMCs are divided into cell-on-chips and organ-on-chips based on the distinctions in bionic simulation levels. Herein, we first summarize the characteristics, emergence and development history, composition and structure, and application fields of BMCs. Then, with a focus on the toxicity mechanisms of pollutants, we review the applications and advances of the BMCs in the toxicity assessment of physical, chemical, and biological pollutants, respectively, highlighting its potential and development prospects in environmental toxicology testing. Finally, the opportunities and challenges for further use of BMCs are discussed.

Recent advances in photoelectrochemical platforms based on porous materials for environmental pollutant detection

Human health and ecology are seriously threatened by harmful environmental contaminants. It is essential to develop efficient and simple methods for their detection. Environmental pollutants can be detected using photoelectrochemical (PEC) detection technologies. The key ingredient in the PEC sensing system is the photoactive material. Due to the unique characteristics, such as a large surface area, enhanced exposure of active sites, and effective mass capture and diffusion, porous materials have been regarded as ideal sensing materials for the construction of PEC sensors. Extensive efforts have been devoted to the development and modification of PEC sensors based on porous materials. However, a review of the relationship between detection performance and the structure of porous materials is still lacking. In this work, we present an overview of PEC sensors based on porous materials. A number of typical porous materials are introduced separately, and their applications in PEC detection of different types of environmental pollutants are also discussed. More importantly, special attention has been paid to how the porous material's structure affects aspects like sensitivity, selectivity, and detection limits of the associated PEC sensor. In addition, future research perspectives in the area of PEC sensors based on porous materials are presented.

Green-synthesized silver nanoparticles from Zingiber officinale extract: antioxidant potential, biocompatibility, anti-LOX properties, and in silico analysis

INTRODUCTION

Zingiber officinale extract has emerged as a compelling candidate for green synthesis of nanoparticles, offering diverse applications across medicine, cosmetics, and nutrition. This study delves into the investigation of in vitro toxicity and explores the biomedical utility of green-synthesized silver nanoparticles derived from ginger extract (GE-AgNPs).

METHODS

We employed established protocols to evaluate in vitro aspects such as antioxidant capacity, anti-inflammatory potential, and biocompatibility of GE-AgNPs. Additionally, molecular docking was employed to assess their anti-lipoxygenase (anti-LOX) activity.

RESULTS

Our findings highlight that the extraction of ginger extract at a pH of 6, utilizing a cosolvent blend of ethanol and ethyl acetate in a 1:1 ratio, yields heightened antioxidant capacity attributed to its rich phenolic and flavonoid content. In the context of silver nanoparticle synthesis, pH 6 extraction yields the highest quantity of nanoparticles, characterized by an average size of 32.64 ± 1.65 nm. Of particular significance, GE-AgNPs (at pH 6) demonstrated remarkable efficacy in scavenging free radicals, as evidenced by an IC50 value of 6.83 ± 0.47 µg/mL. The results from the anti-LOX experiment indicate that GE-AgNPs, at a concentration of 10 µg/mL, can inhibit LOX activity by 25%, outperforming ginger extract which inhibits LOX by 17-18%. Notably, clionasterol exhibited higher binding energy and enhanced stability (-8.9 kcal/mol) compared to nordihydroguaiaretic acid. Furthermore, a cell viability study confirmed the safety of GE-AgNPs at a concentration of 17.52 ± 7.00 µg/mL against the L929 cell line.

CONCLUSION

These comprehensive findings underscore the significant biomedical advantages of GE-AgNPs and emphasize their potential incorporation into cosmetic products at a maximum concentration of 10 µg/mL.

Docking assisted mechanistic elucidation of bio conversion of hexavalent chromium by Serratia marcescens AJRR-22 that is effective yet long term sustainable in bio-geosphere

Environmental accumulation of hexavalent chromium [Cr(VI)] in the food chain can induce detrimental effects on plants and animals, which calls for effective remediation strategies using biological entities. The bacterium isolated from an iron mine in Odisha, India, is identified asSerratia marcescensAJRR-22. This multi-metal tolerant strain is capable of bio-converting up to 350 mg/L Cr(VI) within 72 h of incubation. Observable electron dense precipitates in transmission electron microscopic images, data patterns in fluorescence microscopy and flow cytometry clearly reveal the chromate reduction ability of the strain. The molecular study is depicted by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopic analyses. Furthermore, a simulation study to estimate the interactions of chromium bound flavin reductasewith predicted docked complexes suggests significant negative Gibbs free energy and a low inhibition constant (Ki), signifying strong spontaneous binding of Cr(VI) to the enzyme, which makes the strain an efficient candidate for chromium bioremediation.

Recent advances in green technology and Industrial Revolution 4.0 for a sustainable future

This review gives concise information on green technology (GT) and Industrial Revolution 4.0 (IR 4.0). Climate change has begun showing its impacts on the environment, and the change is real. The devastating COVID-19 pandemic has negatively affected lives and the world from the deadly consequences at a social, economic, and environmental level. In order to balance this crisis, there is a need to transition toward green, sustainable forms of living and practices. We need green innovative technologies (GTI) and Internet of Things (IoT) technologies to develop green, durable, biodegradable, and eco-friendly products for a sustainable future. GTI encompasses all innovations that contribute to developing significant products, services, or processes that lower environmental harm, impact, and worsening while augmenting natural resource utilization. Sensors are typically used in IoT environmental monitoring applications to aid ecological safety by nursing air or water quality, atmospheric or soil conditions, and even monitoring species' movements and habitats. The industries and the governments are working together, have come up with solutions-the Green New Deal, carbon pricing, use of bio-based products as biopesticides, in biopharmaceuticals, green building materials, bio-based membrane filters for removing pollutants, bioenergy, biofuels and are essential for the green recovery of world economies. Environmental biotechnology, Green Chemical Engineering, more bio-based materials to separate pollutants, and product engineering of advanced materials and environmental economies are discussed here to pave the way toward the Sustainable Development Goals (SDGs) set by the UN and achieve the much-needed IR 4.0 for a greener-balanced environment and a sustainable future.

Catalytic polymer nanocomposites for environmental remediation of wastewater

The removal of harmful chemicals and species from water, soil, and air is a major challenge in environmental remediation, and a wide range of materials have been studied in this regard. To identify the optimal material for particular applications, research is still ongoing. Polymer nanocomposites (PNCs), which combine the benefits of nanoparticles with polymers, an alternative to conventional materials, may open up new possibilities to overcome this difficulty. They have remarkable mechanical capabilities and compatibility due to their polymer matrix with a very high surface area to volume ratio brought about by their special physical and chemical properties, and the extremely reactive surfaces of the nanofillers. Composites also provide a viable answer to the separation and reuse problems that hinder nanoparticles in routine use. Understanding these PNCs materials in depth and using them in practical environmental applications is still in the early stages of development. The review article demonstrates a crisp introduction to the PNCs with their advantageous properties as a catalyst in environmental remediation. It also provides a comprehensive explanation of the design procedure and synthesis methods for fabricating PNCs and examines in depth the design methods, principles, and design techniques that guide proper design. Current developments in the use of polymer nanocomposites for the pollutant treatment using three commonly used catalytic processes (catalytic and redox degradation, electrocatalytic degradation, and biocatalytic degradation) are demonstrated in detail. Additionally, significant advances in research on the aforementioned catalytic process and the mechanism by which contaminants are degraded are also amply illustrated. Finally, there is a summary of the research challenges and future prospects of catalytic PNCs in environmental remediation.

Microalgal-based bioremediation of emerging contaminants: Mechanisms and challenges

Emerging contaminants (ECs) in different ecosystems have consistently been acknowledged as a global issue due to toxicity, human health implications, and potential role in generating and disseminating antimicrobial resistance. The existing wastewater treatment system is incompetent at eliminating ECs since the effluent water contains significant concentrations of ECs, viz., antibiotics (0.03-13.0 μg L-1), paracetamol (50 μg L-1), and many others in varying concentrations. Microalgae are considered as a prospective and sustainable candidate for mitigating of ECs owing to some peculiar features. In addition, the microalgal-based processes also offer cost and energy-efficient solutions for the bioremediation of ECs than conventional treatment systems. It is pertinent that, microalgal-based processes also provides waste valorization benefits as microalgal biomass obtained after ECs treatment can be potentially applied to generate biofuels. Moreover, microalgae can effectively utilize alternative metabolic (cometabolism) routes for enhanced degradation of ECs. Additionally, the ECs removal via the microalgal biodegradation route is highly promising as it can transform the ECs into less toxic compounds. The present review comprehensively discusses different mechanisms involved in removing ECs and various factors that affect their removal. Also, the technoeconomic feasibility of microalgae than other conventional wastewater treatment methods is summarised. The review also highlighted the different molecular and genetic tools that can augment the activity and robustness of microalgae for better removal of organic contaminants. Finally, we have summarised the challenges and future research required towards microalgal-based bioremediation of emerging contaminants (ECs) as a holistic approach.

Application of CRISPR/Cas9-based genome editing in ecotoxicology

Chemicals are widely used and released into the environment, and their degradation, accumulation, migration, and transformation processes in the environment can pose a threat to the ecosystem. The advancement in analytical methods with high-throughput screening of biomolecules has revolutionized the way toxicologists used to explore the effects of chemicals on organisms. CRISPR/Cas is a newly developed tool, widely used in the exploration of basic science and biologically engineered products given its high efficiency and low cost. For example, it can edit target genes efficiently, and save loss of the crop yield caused by environmental pollution as well as gain a better understanding of the toxicity mechanisms from various chemicals. This review briefly introduces the development history of CRISPR/Cas and summarizes the current application of CRISPR/Cas in ecotoxicology, including its application on improving crop yield and drug resistance towards agricultural pollution, antibiotic pollution and other threats. The benefits by applying the CRISPR/Cas9 system in conventional toxicity mechanism studies are fully demonstrated here together with its foreseeable expansions in other area of ecotoxicology. Finally, the prospects and disadvantages of CRISPR/Cas system in the field of ecotoxicology are also discussed.

Hydroxyapatite and ionic liquid coupled with hybrid membranes for toxic pollutant removal and remediation

Access to clean water is the mandatory requirement for every living being to sustain life. So, membrane-based integrated approach of adsorption and separation technology has recently been preferred by scientists over other conventional techniques, for wastewater treatment. Current research focused on the synthesis of novel imidazolium (A1) based IL, which was further functionalized with hydroxyapatite (HAp; extracted from Labeo rohita scales), to create possible solutions towards environmental remediation. Cellulose acetate (CA) was used for the fabrication of three different ionic liquid membranes. All the synthesized products were characterized by FTIR, XRD and TGA. Two dyes of different nature, i.e., congo red (anionic) and crystal violet (cationic) were selected because of their highly toxic and carcinogenic effects, for batch adsorption experiments. Antibacterial activity of the synthesized membranes was also evaluated against S. aureus. Results of the study revealed that CA-HA1 1:2 acted as the best adsorbent towards the removal of crystal violet, exhibiting removal efficiency of 98% with the contact time of 24 h while in case of congo red adsorption, CA-HA1 (1:2) proved as prime adsorbent with the removal efficiency of 96% for the same preceding contact time. Considering the antibacterial character of the synthesized membranes, CA-A1 (1:1) emerged as very efficient antibacterial agent with the inhibition zone of 50 mm after 48 h. The overall behavior of monolayer and multilayer adsorption was witnessed for both dyes while kinetic studies favored the pseudo-second order reaction for all adsorbents.

Biosynthesis of green CuO@C nanocomposite using Combretum indicum flower extract for organic dye removal: adsorption performance, modeling, and recyclability studies

Water contamination becomes one of the most high-priority environmental concerns, calling for the efficient treatment techniques. Bionanocomposites can be robust adsorbents, but the synthesis requires toxic chemicals or energy consuming and cause the secondary pollution. Green nanocomposites can be biogenically synthesized using the plant extract to end up with a critically safe strategy. Herein, we used the flower extract of Combretum indicum plant as a bio-based reductant and carbonaceous source for the green CuO@C nanocomposite. This green nanoadsorbent obtained a specific surface area of 17.33 m2/g, good crystallinity, and functional group-containing surface, i.e., -OH and -CONH-. We also conducted the optimization of parameters, i.e., concentration, CuO@C dose, pH, time, and temperature, and reached removal efficiencies towards malachite green (MG, 83.23%), Congo red (CR, 84.60%), brilliant blue (BB, 71.39%), and methylene blue (MB, 23.67%). The maximum adsorption capacities were found as ordered, MG (46.387 mg/g) > MB (23.154 mg/g) > BB (22.8 mg/g) > CR dye (11.063 mg/g). Through the intra-particle diffusion kinetic model, MG and BB adsorption endured a three-step process, while CR and MB adsorption was a two-step process. The recyclability of the green CuO@C nanocomposite was three cycles with 67.54% for the final cycle of BB removal. Moreover, the nanoadsorbent displayed a high stability, checked by X-ray diffraction, FT-IR analysis, EDX spectra, and SEM images. It is recommended that the green CuO@C nanocomposite biosynthesized using the Combretum indicum flower extract can be a good alternative for the dye treatment from wastewater.

Molecularly imprinted polymers (MIPs) as efficient catalytic tools for the oxidative degradation of 4-nonylphenol and its by-products

Water pollution is a current global concern caused by emerging pollutants like nonylphenol (NP). This endocrine disruptor cannot be efficiently removed with traditional wastewater treatment plants (WTPs). Therefore, this work aimed to evaluate the adsorption influence of molecularly imprinted polymers (MIPs) on the oxidative degradation (ozone and ultraviolet irradiations) of 4-nonylphenol (4-NP) and its by-products as a coadjuvant in WTPs. MIPs were synthesized and characterized; the effect of the degradation rate under system operating conditions was studied by Box-Behnken response surface design of experiments. The variables evaluated were 4-NP concentration, ozone exposure time, pH, and MIP amount. Results show that the MIPs synthesized by co-precipitation and bulk polymerizations obtained the highest retention rates (> 90%). The maximum adsorption capacities for 4-NP were 201.1 mg L-1 and 500 mg L-1, respectively. The degradation percentages under O3 and UV conditions reached 98-100% at 120 s of exposure at different pHs. The degradation products of 4-NP were compounds with carboxylic and ketonic acids, and the MIP adsorption was between 50 and 60%. Our results present the first application of MIPs in oxidation processes for 4-NP, representing starting points for the use of highly selective materials to identify and remove emerging pollutants and their degradation by-products in environmental matrices.

An efficient biosorbent material for green remediation of contaminated water medium

The discharge of large amounts of wastewater carrying various contaminants from many anthropogenic activities into the receiving water environment is a multidimensional issue negatively affecting the ecological system and natural balance in many ways. The removal of pollutants by the biologically-originated materials is an emerging area of interest due to profoundly their environmental friendliness, renewability, sustainability, readily availability, biodegradability, multiplicity, low (or no) economic cost, high affinity, capacity, and stability. In the present study, a popular ornamental plant, Pyracantha coccinea M. J. Roemer, was converted into a green sorbent material with the goal to effectively remove a widespread contaminant (synthetic dye, C. I. Basic Red 46) from synthetic wastewater. The physicochemical characteristics of the prepared biosorbent were determined by the instrumental analyses of FTIR and SEM. The batch experiments of various operational influence parameters were conducted to maximize the system efficiency. The wastewater remediation behavior by the material was investigated by the kinetics, thermodynamics, and isotherm experiments. The biosorbent had a non-uniform and rough surface architecture with a diversity of functional groups. The maximum remediation yield was achieved with the contact duration of 360 min, the pollutant load of 30 mg L-1, the pH of 8, and the biosorbent quantity of 10 mg (0.1 g L-1). The kinetics of the contaminant removal showed good agreement with the pseudo-second-order model. Thermodynamics study indicated that the treatment process was spontaneous and occurred by physisorption. Langmuir model fitted the isotherm data of the biosorption operation well and the maximum pollutant cleanup capacity of the material was determined to be 169.354 mg g-1. These outcomes showed that P. coccinea M. J. Roemer could be used as a promising material for low-cost and green treatment of wastewater.

Fe3O4@MIL-100(Fe) modified ZnS nanoparticles with enhanced sonocatalytic degradation of tetracycline antibiotic in water

Sonocatalysis has attracted excellent research attention to eradicate hazardous pollutants from the environment effectively. This work synthesised an organic/inorganic hybrid composite catalyst by coupling Fe3O4@MIL-100(Fe) (FM) with ZnS nanoparticles using the solvothermal evaporation method. Remarkably, the composite material delivered significantly enhanced sonocatalytic efficiency for removing tetracycline (TC) antibiotics in the presence of H2O2 compared to bare ZnS nanoparticles. By adjusting different parameters such as TC concentration, catalyst dosage and H2O2 amount, the optimized composite (20 %Fe3O4@MIL-100(Fe)/ZnS) removed 78.25% antibiotic in 20 min at the cost of 1 mL of H2O2. These much superior activities are attributed to the efficient interface contact, effective charge transfer, accelerated transport capabilities and strong redox potential for the superior acoustic catalytic performance of FM/ZnS composite systems. Based on various characterization, free radical capture experiments and energy band structures, we proposed a mechanism for the sonocatalytic degradation of tetracycline based on S-scheme heterojunctions and Fenton like reactions. This work will provide an important reference for developing ZnS-based nanomaterials to study sonodegradation of pollutants.

Bio-Based Adsorption as Ecofriendly Method for Wastewater Decontamination: A Review

Intense human activities have for years contributed to the pollution of the environment by many dangerous pollutants such as heavy metals, pesticides, or polycyclic aromatic hydrocarbons. There are many conventional methods used to control pollution, with practical and/or financial drawbacks. Therefore, in recent years, an innovative, easy-to-implement and inexpensive adsorption method has been developed to recover waste and clean up water from micropollutants. Firstly, this article aims to summarize the issues related to water remediation and to understand the advantages and disadvantages of the methods classically used to purify water. In particular, this review aims to provide a recent update of the bio-based adsorbents and their use. Differently from the majority of the reviews related to wastewater treatment, in this article several classes of pollutants are considered. Then, a discussion about the adsorption process and interactions involved is provided. Finally, perspectives are suggested about the future work to be done in this field.

Recent advances in carbon-based nanomaterials for the treatment of toxic inorganic pollutants in wastewater

Wastewater contains inorganic pollutants, generated by industrial and domestic sources, such as heavy metals, antibiotics, and chemical pesticides, and these pollutants cause many environmental problems.

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

A new configuration of aluminum electrodes has been performed in an electrocoagulation reactor (ECR) to remove toxic metals from synthetic wastewater. The ECR contains four concentric-cubic electrodes that were connected to the DC power supply with a bipolar mode. The ability of this reactor to eliminate 200 ppm Pb, 200 ppm Cd and 200 ppm Cu from wastewater was investigated under the effect of pH (4-10), applied current (0.2-2.6 A), and the reaction time of (4-60 min). Two grams of NaCl were added to each experiment to enhance the electrical conductivity and minimize the passivation of cathode surfaces. The experiments, analysis, and optimization were conducted using response surface methodology type Box-Behnken design (RSM-BBD) and the Minitab-statistical software program. The highest elimination of heavy metals was: Pb-99.73%, Cd-98.54%, and Cu-98.92% at pH 10, 1.4 A of the applied current, and 60 min of the reaction time. The total real consumption of anodes under these conditions was 0.55 g, and the energy consumption was 12.71 kWh/m3. All reactions of metal removal that occurred in the present EC reactor obey the kinetic of a first-order reaction. Thermodynamics parameters of present electrocoagulation removal of heavy metals indicate an endothermic, spontaneous nature, and random irregularity at the liquid-solid interaction. The highest values of removal efficiencies and the considerably lowest values of energy and electrode consumption proved that the electrocoagulation technology applies in wastewater treatment containing toxic metals.•The anode electrodes were perforated to decrease the amount of electrode consumption, while the cathode electrodes were not perforated.•The new EC reactor eliminated Pb-99.73%, Cd-98.54%, and Cu-98.92% of 200 mg/l of each metal at pH 10, applied current of 1.4 A, and reaction time of 60 min. Moreover, the consumption of energy and electrodes was significantly low.•The performance indicator (R²) of the studied responses was higher than 0.95.

Cross-Linked Ionic Liquid Polymer for the Effective Removal of Ionic Dyes from Aqueous Systems: Investigation of Kinetics and Adsorption Isotherms

In the current study, we have synthesized an imidazolium based cross-linked polymer, namely, 1-vinyl-3-ethylimidazolium bis(trifluoromethylsulfonyl)imide (poly[veim][Tf2N]-TRIM) using trimethylolpropane trimethacrylate as cross linker, and demonstrated its efficiency for the removal of two extensively used ionic dyes—methylene blue and orange-II—from aqueous systems. The detailed characterization of the synthesized poly[veim][Tf2N]-TRIM was performed with the help of 1H NMR, TGA, FT-IR and FE-SEM analysis. The concentration of dyes in aqueous samples before and after the adsorption process was measured using an UV-vis spectrophotometer. The process parameters were optimised, and highest adsorption was obtained at a solution pH of 7.0, adsorbent dosage of 0.75 g/L, contact time of 7 h and dye concentrations of 100 mg/L and 5.0 mg/L for methylene blue and orange-II, respectively. The adsorption kinetics for orange-II and methylene blue were well described by pseudo-first-order and pseudo−second-order models, respectively. Meanwhile, the process of adsorption was best depicted by Langmuir isotherms for both the dyes. The highest monolayer adsorption capacities for methylene blue and orange-II were found to be 1212 mg/g and 126 mg/g, respectively. Overall, the synthesized cross-linked poly[veim][Tf2N]-TRIM effectively removed the selected ionic dyes from aqueous samples and provided >90% of adsorption efficiency after four cycles of adsorption. A possible adsorption mechanism between the synthesised polymeric adsorbent and proposed dyes is presented. It is further suggested that the proposed ionic liquid polymer adsorbent could effectively remove other ionic dyes and pollutants from contaminated aqueous systems.

Graphene Synthesis Techniques and Environmental Applications

Graphene is fundamentally a two-dimensional material with extraordinary optical, thermal, mechanical, and electrical characteristics. It has a versatile surface chemistry and large surface area. It is a carbon nanomaterial, which comprises sp² hybridized carbon atoms placed in a hexagonal lattice with one-atom thickness, giving it a two-dimensional structure. A large number of synthesis techniques including epitaxial growth, liquid phase exfoliation, electrochemical exfoliation, mechanical exfoliation, and chemical vapor deposition are used for the synthesis of graphene. Graphene prepared using different techniques can have a number of benefits and deficiencies depending on its application. This study provides a summary of graphene preparation techniques and critically assesses the use of graphene, its derivates, and composites in environmental applications. These applications include the use of graphene as membrane material for the detoxication and purification of water, active material for gas sensing, heavy metal ions detection, and CO₂ conversion. Furthermore, a trend analysis of both synthesis techniques and environmental applications of graphene has been performed by extracting and analyzing Scopus data from the past ten years. Finally, conclusions and outlook are provided to address the residual challenges related to the synthesis of the material and its use for environmental applications.

Fabrication and characterization of magnetic nanomaterials for the removal of toxic pollutants from water environment: A review

The success of any sustainable growth represents an advancement of novel approaches and new methodologies for managing any ecological concern. Magnetic nanoparticles have gained recent interest owing to their versatile properties such as controlled size, shape, quantum and surface effect, etc, and outcome in wastewater treatment and pollutant removal. Developments have progressed in synthesizing magnetic nanoparticles with the required size, shape and morphology, surface and chemical composition. Magnetic nanoparticles are target specific and inexpensive compared to conventional treatment techniques. This review insight into the synthesis of magnetic nanoparticles using physical, chemical, and biological methods. The biological method of synthesizing magnetic nanoparticles serves to be cost-effective, green process, and eco-friendly for various applications. Characterization studies of synthesized nanoparticles using TEM, XRD, SARS, SANS, DLS, etc are discussed in detail. Magnetic nanoparticles are widely utilized in recent research for removing organic and inorganic contaminants. It was found that the magnetic nanosorption approach together with redox reactions proves to be an effective and flexible mechanism for the removal of pollutants from waste effluents.

Removal of toxic heavy metals using genetically engineered microbes: Molecular tools, risk assessment and management strategies

The direct release of industrial effluent into the water and other anthropogenic activities causes water pollution. Heavy metal ions are the primary contaminant in the industrial effluents which are exceptionally toxic at low concentrations, terribly disturb the endurance equilibrium of activities in the eco-system and be remarkably hazardous to human health. Different conventional treatment methodologies were utilized for the removal of toxic pollutants from the contaminated water which has several drawbacks such as cost-ineffective and lower efficiency. Recently, genetically modified micro-organisms (GMMs) stand-out for the removal of toxic heavy metals are viewed as an economically plausible and environmentally safe technique. GMMs are microorganisms whose genetic material has been changed utilizing genetic engineering techniques that exhibit enhanced removal efficiency in comparison with the other treatment methodologies. The present review comments the GMMs such as bacteria, algae and fungi and their potential for the removal of toxic heavy metals. This review provides current aspects of different advanced molecular tools which have been used to manipulate micro-organisms through genetic expression for the breakdown of metal compounds in polluted areas. The strategies, major limitations and challenges for genetic engineering of micro-organisms have been reviewed. The current review investigates the approaches working on utilizing genetically modified micro-organisms and effective removal techniques.

Environmental Chemicals: Integrative Approach to Human Biomonitoring and Health Effects

In recent decades, citizen awareness of toxic chemicals has been a topic of interest, particularly concerning national and international policy decision makers, expert/scientific platforms, and health protection organizations (WHO, UNEP, CDC, EFSA, IPEN, etc [...].