Heavy metal(loid)s in agricultural soil from main grain production regions of China: Bioaccessibility and health risks to humans

Relationship between nitrate, heavy metal, and sterols contents in Japanese agricultural soils with risk of groundwater pollution

In Japanese agricultural lands, nitrate-nitrogen contamination of soil and groundwater often occurs due to the application of livestock excrements and compost. Therefore, rural soils in Japan were sampled and analyzed for nitrate-nitrogen leaching, heavy metal content, and sterols associated with livestock excrement and compost to calculate contamination risk indicators. The results were analyzed using self-organizing maps and cluster analysis. Nitrate-nitrogen content using water extraction was detected in most of the sampled soils. In addition, many samples from areas that were already severely contaminated with nitrate-nitrogen showed particularly high concentrations. Coprostanol, an indicator of fecal contamination, was detected in more than half of the samples. The main source of nitrate-nitrogen contamination in these areas is livestock excrement and compost. Self-organization maps showed that areas with high nitrate-nitrogen contamination also corresponded to areas with high copper and zinc soil contents. The self-organization maps and cluster analysis resulted in five clusters: a nitrate-contaminated group mainly originating from livestock excrement and compost, a heavy metal-contaminated group, a general group, a nitrate-contaminated group mainly originating from chemical fertilizers, and a contaminated group with potentially hazardous substances requiring attention. Authorities and decision-makers can use the results to prioritize areas requiring remediation.

Ecotoxicity of thallium to two soil animal species with different niches and modification by organic materials

Soil thallium (Tl) contamination is of major public concern but little is known about soil Tl ecological toxicity or potential ecological remediation strategies. Here, two soil animal species with different ecological niches, Folsomia candida and Enchytraeus crypticus, were used to test Tl toxicity and modification by exogenous organic materials (i.e. maize straw and biochar). The endpoints of Tl ecotoxicity to F. candida and E. crypticus were studied at two biological levels, i.e., the individual (body Tl concentrations) and the population (survival, reproduction, and growth). Thallium concentrations in F. candida and E. crypticus increased with increasing soil Tl concentration, and their survival and reproduction rates decreased with increasing soil Tl concentration. The LC50 value of Tl effects on F. candida mortality (28 d) was 24.0 mg kg-1 and the EC50 value of reproduction inhibition was 6.51 mg kg-1. The corresponding values were 4.15 mg kg-1 and 2.31 mg kg-1 respectively for E. crypticus showing higher sensitivity to soil Tl than F. candida. These effective values are comparable to or much lower than the environmental Tl concentrations in field soils, suggesting high potential ecological risk. Both biochar and straw can decrease animal body Tl concentrations in different ways, i.e. reducing Tl availability or offering clean food sources, and addition of exogenous organic materials clearly mitigated Tl ecotoxicity in highly polluted soil. The results highlight the potential Tl ecological risk to soil animals and the potential use of organic materials to control the toxicity.

Evaluation of ecological and health risks of trace elements in soils of olive orchards and apportionment of their sources using the APCS-MLR receptor model

İzmir, Turkey's third most populous city, is in an important position in terms of both agriculture and industry. The province, which contributes 9.3% to the country's industrial production, also has an important potential in terms of olive cultivation. However, until now, no research has been undertaken to analyze the content of trace elements (TEs) in the soil of olive orchards in İzmir. This study was carried out to determine the pollution level and ecological risks of TEs in the olive orchards soils of İzmir province, to reveal their potential sources and to evaluate their health risks. Among the TEs, the average content of only Ni (37.9 mg/kg) exceeded the world soil average content (29 mg/kg), while the average content of only Cd (0.176 mg/kg) exceeded the upper continental crust content (0.09 mg/kg). Enrichment factor revealed that there was significant enrichment for Cd in 73.6%, Ni in 11.6% and Cr in 5.4% of olive orchards, respectively, due to polluted irrigation water and agrochemicals. Similarly, ecological risk factor indicated that there were moderate and considerable ecological risks for Cd in 48.8% and 23.3% of olive orchards, respectively. Absolute principal component scores-multiple linear regression (APCS-MLR) model showed that Ni and Cr in the study area are affected by agricultural sources, Al, Co, Cu, Fe, Mn, Pb and Zn originate from lithogenic sources, and Cd originates from mixed sources. Based on health risk evaluation methods, non-carcinogenic and carcinogenic effects would not be expected for residents. This study provides significant knowledge for evaluating soil TE pollution in olive orchards and serves a model for source apportionment and human health risk evaluation of TEs in other agricultural regions.

Prediction of the bioaccessibility and accumulation of cadmium in the soil-rice-human system based on optimized DGT and BCR coupled models

Cadmium, as a typical heavy metal, has the potential to induce soil pollution and threaten human health through the soil-plant-human pathway. The conventional evaluation method based on the total content in soil cannot accurately represent the content migrated from the food chain to plants and the human body. Previous studies focused on the process of plant enrichment of heavy metals in soil, and very few studies directly predicted human exposure or risk through the labile state of Cd in soil. Hence, a relatively accurate and convenient prediction model of Cd release and translocation in the soil-rice-human system was developed. This model utilizes available Cd and soil parameters to predict the bioavailability of Cd in soil, as well as the in vitro bioaccessibility of Cd in cooked rice. The bioavailability of Cd was determined by the Diffusive Gradients in Thin-films technology and BCR sequential extraction procedure, offering in-situ quantification, which presents a significant advantage over traditional monitoring methods and aligns closely with the actual uptake of heavy metals by plants. The experimental results show that the prediction model based on the concentration of heavy metal forms measured by BCR sequential extraction procedure and diffusive gradients in thin-films technique can accurately predict the Cd uptake in rice grains, gastric and gastrointestinal phase (R2=0.712, 0.600 and 0.629). This model accurately predicts Cd bioavailability and bioaccessibility across the soil-rice-human pathway, informing actual human Cd intake, offering scientific support for developing more effective risk assessment methods.

Co-mutation of OsLPR1/3/4/5 provides a promising strategy to minimize Cd contamination in rice grains

Minimizing cadmium (Cd) contamination in rice grains is crucial for ensuring food security and promoting sustainable agriculture. Utilizing genetic modification to generate rice varieties with low Cd accumulation is a promising strategy due to its cost-effectiveness and operational simplicity. Our study demonstrated that the CRISPR-Cas9-mediated quadruple mutation of the multicopper oxidase genes OsLPR1/3/4/5 in the japonica rice cultivar Tongjing 981 had little effect on yields. However, a notable increase was observed in the cell wall functional groups that bind with Cd. As a result, the quadruple mutation of OsLPR1/3/4/5 enhanced Cd sequestration within the cell wall while reducing Cd concentrations in both xylem and phloem sap, thereby inhibiting Cd transport from roots to shoots. Consequently, Cd concentrations in brown rice and husk in oslpr1/3/4/5 quadruple mutants (qm) decreased by 52% and 55%, respectively, compared to the wild-type. These findings illustrate that the quadruple mutation of OsLPR1/3/4/5 is an effective method for minimizing Cd contamination in rice grains without compromising yields. Therefore, the quadruple mutation of OsLPR1/3/4/5 via biotechnological pathways may represent a valuable strategy for the generation of new rice varieties with low Cd accumulation.

Ecological and health risk assessments of heavy metals and their accumulation in a peanut-soil system

Heavy metals pollution is a notable threat to environment and human health. This study evaluated the potential ecological and health risks of heavy metals (Cu, Cr, Cd, Pb, Zn, Ni, and As) and their accumulation in a peanut-soil system based on 34 soil and peanut kernel paired samples across China. Soil As and Cd posed the greatest pollution risk with 47.1% and 17.6% of soil samples exceeding the risk screen levels, respectively, with 26.5% and 20.6% of the soil sites at relatively strong potential ecological risk level, respectively, and with the geo-accumulation levels at several soil sites in the uncontaminated to moderately contaminated categories. About 35.29% and 2.94% of soil sites were moderately and severely polluted based on Nemerow comprehensive pollution index, respectively, and a total of 32.4% of samples were at moderate ecological hazard level based on comprehensive potential ecological risk index values. The Cd, Cr, Ni, and Cu contents exceeded the standard in 11.76, 8.82, 11.76 and 5.88% of the peanut kernel samples, respectively. Soil metals posed more health risks to children than adults in the order As > Ni > Cr > Cu > Pb > Zn > Cd for non-carcinogenic health risks and Ni > Cr ≫ Cd > As > Pb for carcinogenic health risks. The soil As non-cancer risk index for children was greater than the permitted limits at 14 sites, and soil Ni and Cr posed the greatest carcinogenic risk to adults and children at many soil sites. The metals in peanut did not pose a non-carcinogenic risk according to standard. Peanut kernels had strong enrichment ability for Cd with an average bio-concentration factor (BCF) of 1.62. Soil metals contents and significant soil properties accounted for 35-74% of the variation in the BCF values of metals based on empirical prediction models.

Health risk assessment of heavy metal(loid)s in road dust via dermal exposure pathway from a low latitude plateau provincial capital city: The importance of toxicological verification

The human health risk assessment through the dermal exposure of metal (loid)s in dust from low latitude and high geological background plateau cities was largely unknown. In this study, the road dust samples were harvested from a typical low-latitude plateau provincial capital city Kunming, Southwest China. The total concentration and dermal bioaccessibility of heavy metal (loid)s in road dust were determined, and their health risks as well as cytotoxicity on human skin keratinocytes were also assessed. The average concentrations of As (28.5 mg/kg), Cd (2.65 mg/kg), Mn (671 mg/kg), and Zn (511 mg/kg) exceeded the soil background values. Arsenic had the highest bioaccessibility after 2 h (3.79%), 8 h (4.24%), and 24 h (16.6%) extraction. The dermal pathway when bioaccessibility is considered has a higher hazard quotient than the conventional method using total metal(loid)s in the dust. In addition, toxicological verification suggested that the dust extracts suppressed the cell viability, increased the reactive oxygen species (ROS) level and DNA damage, and eventually activated the mitochondria-mediated apoptosis pathway, evidenced by the upregulation of Caspase-3/9, Bax, and Bak-1. Cadmium was positively correlated with the mRNA expression of Bax. Taken together, our data indicated that both dermal bioaccessibility and cytotoxicity should be considered for accurate human skin health risk assessment of heavy metal(loid)s in road dust, which may provide new insight for accurate human health risk assessment and environmental management.

Heavy metal spatial distribution, source analysis, and ecological risks in the central hilly area of Hainan Island, China: results from a high-density soil survey

The presence of heavy metals in soil has gained considerable attention due to their potential risks to ecosystems and human health. In this study, a thorough soil investigation was performed in the hilly region of central Hainan, which was formerly regarded as an area with the highest ecological environmental quality. A total of 7094 soil samples were systematically collected with high density over a large area. Simultaneously, a detailed investigation was conducted on the surrounding environment of each sampling point, including environmental factors such as soil, land use and crop types. The soil samples were analysed for heavy metals, pH, organic matter, and other parameters. The soil heavy metal pollution level, ecological risk and health risk were evaluated using the geo-accumulation index and the potential ecological risk index. The findings showed that the average contents of the heavy metals As, Cd, Cr, Cu, Hg, Ni, Pb and Zn in the soil were 1.68, 0.042, 24.2, 6.49, 0.0319, 7.06, 29.6 and 49.8 mg·kg-1 respectively. Except for Hg, the mean values of the other heavy metals were either lower than or similar to the background values of Hainan. Also, only a few localised areas showed contamination by heavy metals. The primary sources of heavy metals, identified by a positive matrix factorisation model, could be categorised into four types: natural sources related to the soil formation process from acidic intrusive rocks (such as granite); natural sources primarily influenced by atmospheric deposition; anthropogenic sources associated with agricultural activities; and natural sources related to the soil formation process from middle-mafic intrusive rocks and black shales. The correlation analysis and variance analysis findings suggested that the content of heavy metals in the soil was primarily associated with the parent rock. The study area generally had low heavy metal levels and was not significantly polluted. However, agricultural activities still affected the enrichment of heavy metals. Therefore, it is imperative to remain vigilant about the ecological risks linked to soil heavy metals while continuing land development and expanding agricultural activities in the future. These findings indicate that conducting high-density soil surveys can enhance our understanding of regional soil heavy metals and enable reliable recommendations for agricultural planning. Whether in areas with low pollution risk or potential pollution risk, it is recommended that high-density soil surveys be conducted provide scientific guidance for further agricultural development.

Assessment of the stabilization effect of ferrous sulfate for arsenic-contaminated soils based on chemical extraction methods and in vitro methods: Methodological differences and linkages

Stabilization of arsenic-contaminated soils with ferrous sulfate has been reported in many studies, but there are few stabilization effects assessments simultaneously combined chemical extraction methods and in vitro methods, and further explored the corresponding alternative relationships. In this study, ferrous sulfate was added at FeAs molar ratio of 0, 5, 10 and 20 to stabilize As in 10 As spiked soils. Stabilization effects were assessed by 6 chemical extraction methods (toxicity characteristic leaching procedures (TCLP), HCl, diethylenetriamine pentaacetic acid (DTPA), CaCl2, CH3COONH4, (NH4)2SO4), and 4 in vitro methods (physiologically based extraction test (PBET), in vitro gastrointestinal method (IVG), Solubility Bioaccessibility Research Consortium (SBRC) method, and the Unified Bioaccessibility Research Group of Europe method (UBM)). The results showed that the HCl method provides the most conservative assessment results in non-calcareous soils, and in alkaline calcareous soils, (NH4)2SO4 method provides a more conservative assessment. In vitro methods provided significantly higher As concentrations than chemical extraction methods. The components of the simulated digestion solution as well as the parameters may have contributed to this result. The small intestinal phase of PBET and SBRC method produced the highest and lowest ranges of As concentrations, and in the range of 127-462 mg/kg and 68-222 mg/kg when the FeAs molar ratio was 5. So the small intestinal phase of PBET method may provide the most conservative assessment results, while the same phase of SBRC may underestimate the human health risks of As in stabilized soil by 51 %(at a FeAs molar ratio of 5). Spearman correlation analysis indicated that the small intestinal phase of PBET method correlated best with HCl method (correlation coefficient: 0.71). This study provides ideas for the assessment of stabilization efforts to ensure that stabilization meets ecological needs while also being less harmful to humans.

Chemical and genotoxic characterization of bioaccessible fractions as a comprehensive in vitro tool in assessing the health risk due to dust-bound contaminant ingestion

In the last two decades, awareness grew on the matter of the impact of environment on human health. Contaminants sorbed onto soil and settled dust can be ingested and thus represent a hazard, particularly to young children, who play on the ground and bring their hands and objects to their mouth. Metal(loid)s and polycyclic aromatic hydrocarbons (PAHs) are of concern as they are both carcinogenic to humans and ubiquitous in outdoor environments. The present study aims to assess the total and bioaccessible fractions of PAHs and metal(loid)s present in settled dust of four preschools located in industrial, urban, and suburban areas. On the one hand, children's incremental life cancer risks (ILCR) were calculated according to ingestion pathway. On the other hand, the genotoxicities of the bioaccessible dust-bonded contaminants were determined on gastric cells. PAH concentrations ranged from 50.9 to 2267.3 ng/g, and the bioaccessible fraction represented 10.7% of the total in average. Metal(loid) concentration ranged from 12,430 to 38,941 µg/g, and the mean bioaccessibility was of 40.1%. Cancer risk ranged from 2.8.105 to 8.6.105, indicating that there is a potential cancer risk for children linked to the ingestion of settled dust. The inorganic bioaccessible fraction induced little DNA (< 20%TailDNA) and chromosomal damages (30% increase in micronuclei), whereas the organic bioaccessible fraction induced higher DNA (17-63%TailDNA) and chromosomal damages (88% increase in micronuclei). Such experimental approach needs to be deepen, as a tool complementary to cancer risk calculation, since the latter only lays on a set of targeted contaminants with known toxicity values.

Effects of arbuscular mycorrhizal fungi on the reduction of arsenic accumulation in plants: a meta-analysis

Arsenic (As) accumulation in plants is a global concern. Although the application of arbuscular mycorrhizal fungi (AMF) has been suggested as a potential solution to decrease As concentration in plants, there is currently a gap in a comprehensive, quantitative assessment of the abiotic and biotic factors influencing As accumulation. A meta-analysis was performed to quantitatively investigate the findings of 76 publications on the impacts of AMF, plant properties, and soil on As accumulation in plants. Results showed a significant dose-dependent As reduction with higher mycorrhizal infection rates, leading to a 19.3% decrease in As concentration. AMF reduced As(V) by 19.4% but increased dimethylarsenic acid (DMA) by 50.8%. AMF significantly decreased grain As concentration by 34.1%. AMF also improved plant P concentration and dry biomass by 33.0% and 62.0%, respectively. The most significant reducing effects of As on AMF properties were seen in single inoculation and experiments with intermediate durations. Additionally, the benefits of AMF were significantly enhanced when soil texture, soil organic carbon (SOC), pH level, Olsen-P, and DTPA-As were sandy soil, 0.8%-1.5%, ≥7.5, ≥9.1 mg/kg, and 30-60 mg/kg, respectively. AMF increased easily extractable glomalin-related soil protein (EE-GRSP) and total glomalin-related soil protein (T-GRSP) by 23.0% and 28.0%, respectively. Overall, the investigated factors had significant implications in developing AMF-based methods for alleviating the negative effects of As stress on plants.

Heavy metals pollution from smelting activities: A threat to soil and groundwater

Throughout the literature, the word "heavy metal" (HM) has been utilized to describe soil contamination; in this context, we characterize it as those elements with a density greater than 5 g per cubic centimeter. Contamination is one of the major global health concerns, especially in China. China's rapid urbanization over the past decades has caused widespread urban water, air, and soil degradation. This study provides a complete assessment of the soil contamination caused by heavy metals in China's mining and smelting regions. The study of heavy metals (HMs) includes an examination of their potential adverse impacts, their origins, and strategies for the remediation of soil contaminated by heavy metals. The presence of heavy metals in soil can be linked to both natural and anthropogenic processes. Studies have demonstrated that soils contaminated with heavy metals present potential health risks to individuals. Children are more vulnerable to the effects of heavy metal pollution than adults. The results highlight the significance of heavy metal pollution caused by mining and smelting operations in China. Soil contaminated with heavy metals poses significant health concerns, both carcinogenic and non-carcinogenic, particularly to children and individuals living in heavily polluted mining and smelting areas. Implementing physical, chemical, and biological remediation techniques is the most productive approach for addressing heavy metal-contaminated soil. Among these methods, phytoremediation has emerged as a particularly advantageous option due to its cost-effectiveness and environmentally favorable characteristics. Monitoring heavy metals in soils is of utmost importance to facilitate the implementation of improved management and remediation techniques for contaminated soils.

Total contents, fractionation and bioaccessibility of nine heavy metals in household dust from 14 cities in China

The potential health risk caused by long-term exposure to heavy metals in household dust is not only depended on their total content, but also bioaccessibility. In this study, twenty-one dust samples were collected from residential buildings, schools, and laboratories in 14 provincial-capital/industrial cities of China, aiming to evaluate the total contents, fractionation, bioaccessibility and health risks of nine heavy metals (As, Cd, Cr, Ni, Pb, Mn, Zn, Fe, and Cu). Results showed that the highest levels of Cd, Cr, Ni and Zn were found in laboratory dust, As, Pb and Mn in school dust, and Fe and Cu in residential dust, indicating different source profiles of the heavy metals. The mean bioaccessibility of the heavy metals across all samples as evaluated using SBRC (Solubility Bioavailability Research Consortium), IVG (In Vitro Gastrointestinal), and PBET (Physiologically Based Extraction Test) assays was 58.4%, 32.4% and 17.2% in gastric phase (GP), and 24.9%, 21.9% and 9.39% in intestinal phase (IP), respectively. Cadmium had the highest content in the fractions of E1+C2 (43.7%), as determined by sequential extraction, and Pb, Mn, and Zn had a higher content in E1+C2+F3 (64.2%, 67.2%, 78.8%), resulting in a higher bioaccessibility of these heavy metals than others. Moreover, the bioaccessibility of most heavy metals was inversely related to dust pH (R = -0.18 in GP; -0.18 in IP; P < 0.01) and particle size, while a positive correlation was observed with total organic carbon (R = 0.40 in GP; 0.38 in IP; P < 0.01). The exposure risk calculated by the highest bioaccessibility was generally lower than that calculated by the total content. However, Pb in one school dust sample had an unacceptable carcinogenic risk (adult risk = 1.19 × 10-4; child risk = 1.08 × 10-4). This study suggests that bioaccessibility of heavy metals in household dust is likely related to geochemical fractions and physical/chemical properties. Further research is needed to explore the sources of bioaccessible heavy metals in household dust.

Biochar application for the remediation of soil contaminated with potentially toxic elements: Current situation and challenges

Recently, biochar has garnered extensive attention in the remediation of soils contaminated with potentially toxic elements (PTEs) owing to its exceptional adsorption properties and straightforward operation. Most researchers have primarily concentrated on the effects, mechanisms, impact factors, and risks of biochar in remediation of PTEs. However, concerns about the long-term safety and impact of biochar have restricted its application. This review aims to establish a basis for the large-scale popularization of biochar for remediating PTEs-contaminated soil based on a review of interactive mechanisms between soil, PTEs and biochar, as well as the current situation of biochar for remediation in PTEs scenarios. Biochar can directly interact with PTEs or indirectly with soil components, influencing the bioavailability, mobility, and toxicity of PTEs. The efficacy of biochar in remediation varies depending on biomass feedstock, pyrolysis temperature, type of PTEs, and application rate. Compared to pristine biochar, modified biochar offers feasible solutions for tailoring specialized biochar suited to specific PTEs-contaminated soil. Main challenges limiting the applications of biochar are overdose and potential risks. The used biochar is separated from the soil that not only actually removes PTEs, but also mitigates the negative long-term effects of biochar. A sustainable remediation technology is advocated that enables the recovery and regeneration (95.0-95.6%) of biochar from the soil and the removal of PTEs (the removal rate of Cd is more than 20%) from the soil. Finally, future research directions are suggested to augment the environmental safety of biochar and promote its wider application.

Associations of urinary metal concentrations with anemia: A cross-sectional study of Chinese community-dwelling elderly

BACKGROUND

Anemia seriously affects the health and quality of life of the older adult population and may be influenced by various types of environmental metal exposure. Current studies on metals and anemia are mainly limited to single metals, and the association between polymetals and their mixtures and anemia remains unclear.

METHODS

We determined 11 urinary metal concentrations and hemoglobin levels in 3781 participants. Binary logistic regression and restricted cubic spline (RCS) model were used to estimate the association of individual metals with anemia. We used Bayesian kernel machine regression (BKMR) and Quantile g-computation (Q-g) regression to assess the overall association between metal mixtures and anemia and identify the major contributing elements. Stratified analyses were used to explore the association of different metals with anemia in different populations.

RESULTS

In a single-metal model, nine urinary metals significantly associated with anemia. RCS analysis further showed that the association of arsenic (As) and copper (Cu) with anemia was linear, while cobalt, molybdenum, thallium, and zinc were non-linear. The BKMR model revealed a significant positive association between the concentration of metal mixtures and anemia. Combined Q-g regression analysis suggested that metals such as Cu, As, and tellurium (Te) were positively associated with anemia, with Te as the most significant contributor. Stratified analyses showed that the association of different metals with anemia varied among people of different sexes, obesity levels, lifestyle habits, and blood pressure levels.

CONCLUSIONS

Multiple metals are associated with anemia in the older adult population. A significant positive association was observed between metal mixture concentrations and anemia, with Te being the most important factor. The association between urinary metal concentrations and anemia is more sensitive in the non-hypertensive populations.

Ecological and health risk assessment of heavy metals in agricultural soils from northern China

Soil pollution by heavy metals can cause continuing damage to ecosystems and the human body. In this study, we collected nine fresh topsoil samples and 18 maize samples (including nine leaf samples and nine corn samples) from agricultural soils in the Baiyin mining areas. The results showed that the order of heavy metal concentrations (mg/kg) in agricultural soils was as follows: Zn (377.40) > Pb (125.06) > Cu (75.06) > Ni (28.29) > Cd (5.46) > Hg (0.37). Cd, Cu, Zn, and Pb exceeded the Chinese risk limit for agricultural soil pollution. The average the pollution load index (4.39) was greater than 3, indicating a heavy contamination level. The element that contributed the most to contamination and high ecological risk in soil was Cd. Principal component analysis (PCA) and Pearson's correlation analysis indicated that the sources of Ni, Cd, Cu, and Zn in the soil were primarily mixed, involving both industrial and agricultural activities, whereas the sources of Hg and Pb included both industrial and transportation activities. Adults and children are not likely to experience non-carcinogenic impacts from the soil in this region. Nonetheless, it was important to be aware of the elevated cancer risk presented by Cd, Pb, and especially Ni. The exceedance rates of Cd and Pb in corn were 66.67% and 33.3%, respectively. The results of this research provide data to improve soil protection, human health monitoring, and crop management in the Baiyin district.

In vivo-in vitro correlations (IVIVC) for the assessment of pyrethroid bioavailability in honey

Bioaccessibility/bioavailability is an important factor in assessing the potential human health risk via oral exposure. However, methods for accurately predicting the bioaccessibility/bioavailability of pesticide residues are still limited, preventing accurate measurements of actual exposure to pesticide residues. In this study, pyrethroid bioavailability in honey were analysed using a mouse bioassay and bioaccessibility via in vitro methods with Tenax extraction. The results demonstrated that the combined liver plus kidney data served as an appropriate biomarker to estimate the relative bioavailability. Notably, significant in vivo-in vitro correlations (IVIVC) were observed between bioavailability and bioaccessibility (R2 = 0.7898-0.9793). Estimation of the bioavailability of honey from different nectar plants using derived IVIVC confirmed that different contents and physicochemical properties might affect its bioavailability. The findings provide insight into assessing human exposure to pesticides based on bioavailability and can decrease the uncertainty about the assessment of the risk of dietary exposure to pesticides.

Correlation Between Toxic Elements and Pesticide Residues in Medicinal Herbs Available in Pharmaceutical Market

The use of medicinal plants for self-medication of minor health conditions has become a widespread practice in contemporary society. Few consumes, however, question the contamination of these products with toxic factors resulting from the planet's increasingly polluted environment. This paper presents the levels of five toxic elements (As, Cr, Pb, Cd, and Hg) and nine organochlorine pesticides (hexachlorobenzene (HCB), lindane, heptachor, aldrin, dieldrin, endrin, p,p'DDE, p,p'DDD, and p,p'DDT) in 14 brands of regularly consumed medicinal products in Romania. The toxic elements content was determined using energy-dispersive X-ray fluorescence (EDXRF) technique, and organochlorine pesticide residues (OPCs) were quantified using gas-chromatographic method, equipped with electron capture detector (GC-ECD). The results show that in the case of Cr, Cd, and Hg, the concentrations exceeded the limit values established by World Health Organisation (WHO) for raw herbal material. The higher level of OPCs (such as p,p'DDD, p,p'DDT, aldrin, and dieldrin) was found in the samples of Hypericum perforatum-St. John's wort, Crataegus monogyna-hawthorn, and Epilobium parviflorum-hoary willowherb. The correlations between the content of toxic elements and pesticides were determined by statistical analysis. Hierarchical clustering technique was used to detect natural grouping between the toxic elements and pesticides. For herb samples, four clusters were identified, the strongest correlated cluster consisting of Pb, HCB, Cr, and Hg. A further analysis within this cluster suggested that Cr levels are statistically different from the rest of the elements.

Assessment of source-oriented health risk associated with the oral ingestion of heavy metals in dust within an iron/steel smelting-affected area of the North China Plain

Heavy metals (HMs) from iron/steel smelting activities pose notable risks to human health, especially to those living around industrial facilities of North China Plain, the base of China's steel production. In this study, 78 outdoor windowsill dust samples were collected around a large-scale iron/steel smelter with more than 65 years of production history in the western North China Plain. Nine HMs were analysed to comprehensively assess the health risks by integrating Monte Carlo simulation, oral bioaccessibility, and source apportionment. Results showed serious pollution with Cd, Pb, and Zn based on their geo-accumulation index values and concentrations. Four potential sources including industrial sources (49.85%), traffic sources (21.78%), natural sources (20.58%), and coal combustion (7.79%) were quantitatively identified by multivariate statistical analysis. The oral bioaccessibilities of HMs determined by the physiologically based extraction test ranged from 0.02% to 65.16%. Zn, Mn, Cd, and Pb had higher bioaccessibilities than other HMs. After incorporating oral bioavailability adjustments, noncarcinogenic and carcinogenic risks were significantly reduced, especially for adults. The mean hazard index (HI) for children and adults was below the safety threshold (1.0), whereas the mean of the total carcinogenic risk (TCR) based on HM bioaccessibilities in the gastric phase remained above the acceptable level (1.0E-06) (children: 5.20E-06; adults: 1.16E-06). Traffic sources warranted increased concern as it substantially increased TCR. Cd was identified as the priority pollution in iron/steel smelting areas. Assessing source-oriented health risks associated with oral ingestion exposure can guide the management and control of HM contamination within iron/steel smelting-affected areas.

Potential functions of engineered nanomaterials in cadmium remediation in soil-plant system: A review

Soil cadmium (Cd) contamination is a global environmental issue facing agriculture. Under certain conditions, the stable Cd that bound to soil particles tend to be remobilized and absorbed into plants, which is seriously toxic to plant growth and threat food safety. Engineering nanomaterials (ENMs) has attracted increasing attentions in the remediation of Cd pollution in soil-plant system due to their excellent properties with nano-scale size. Herein, this article firstly systematically summarized Cd transformation in soil, transport in soil-plant system, and the toxic effects in plants, following which the functions of ENMs in these processes to remediate Cd pollution are comprehensively reviewed, including immobilization of Cd in soil, inhibition in Cd uptake, transport, and accumulation, as well as physiological detoxication to Cd stress. Finally, some issues to be further studied were raised to promote nano-remediation technology in the environment. This review provides a significant reference for the practical application of ENMs in remediation of Cd pollution in soil, and contributes to sustainable development of agriculture.

Oral bioaccessibility of PTEs in soils: A review of data, influencing factors and application in human health risk assessment

Understanding the behavior of metal(loi)ds transported from soil to humans is critical for human health risk assessment (HHRA). In the last two decades, extensive studies have been conducted to better assess human exposure to potentially toxic elements (PTEs) by estimating their oral bioaccessibility (BAc) and quantifying the influence of different factors. This study reviews the common in vitro methods used to determine the BAc of PTEs (in particular As, Cd, Cr, Ni, Pb, and Sb) under specific conditions (particularly in terms of the particle size fraction and validation status against an in vivo model). The results were compiled from soils derived from various sources and allowed the identification of the most important influencing factors of BAc (using single and multiple regression analyses), including physicochemical soil properties and the speciation of the PTEs in question. This review presents current knowledge on integrating relative bioavailability (RBA) in calculating doses from soil ingestion in the HHRA process. Depending on the jurisdiction, validated or non-validated bioaccessibility methods were used, and risks assessors applied different approaches: (i) using default assumptions (i.e., RBA of 1); (ii) considering that bioaccessibility value (BAc) accurately represents RBA (i.e., RBA equal to BAc); (iii) using regression models to convert BAc of As and Pb into RBA as proposed by the USA with the US EPA Method 1340; or (iv) applying an adjustment factor as proposed by the Netherlands and France to use BAc from UBM (Unified Barge Method) protocol. The findings from this review should help inform risk stakeholders about the uncertainties surrounding using bioaccessibility data and provide recommendations for better interpreting the results and using bioaccessibility in risk studies.

Health risk assessment of trace metal(loid)s in agricultural soil using an integrated model combining soil-related and plants-accumulation exposures: A case study on Hainan Island, South China

Traditional health risk assessment of trace metal(loid)s (TMs) in agricultural soil exclusively considers direct soil-related exposure and may underestimate the health risks they pose. In this study, the health risks of TMs were evaluated using an integrated model that combined soil-related and plant-accumulating exposures. A detailed investigation of common TMs (Cr, Pb, Cd, As, and Hg) coupled with probability risk analysis based on a Monte Carlo simulation was conducted on Hainan Island. Our results showed that, except for As, the non-carcinogenic risk (HI) and carcinogenic risk (CR) of the TMs were all within the acceptable ranges (HI < 1.0, and CR < 1E-06) for direct soil-related exposure to bio-accessible fractions and indirect exposure via plant accumulation (CR substantially lower than the warning threshold 1E-04). We identified crop food ingestion as the essential pathway for TM exposure and As as the critical toxic element in terms of risk control. Moreover, we determined that RfDo and SFo are the most suitable parameters for assessing As health risk severity. Our study demonstrated that the proposed integrated model combining soil-related and plant-accumulating exposures can avoid major health risk assessment deviations. The results obtained and the integrated model proposed in this study can facilitate future multi-pathway exposure research and could be the basis for determining agricultural soil quality criteria in tropical areas.

Accumulation Pattern and Risk Assessment of Potentially Toxic Elements in Permafrost-Affected Agricultural Soils in Northeast China

The accumulation of potentially toxic elements (PTEs) in agricultural soils is of particular concern in China, while its status, ecological risks, and human health hazards have been little studied in the permafrost areas of Northeast China. In this study, 75 agricultural soil samples (0-20 cm) were collected from the Arctic Village, Mo'he City, in the northernmost part of China. The average concentration (mean ± standard deviation) of As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn were 12.11 ± 3.66 mg/kg, 0.11 ± 0.08 mg/kg, 52.50 ± 8.83 mg/kg, 12.08 ± 5.12 mg/kg, 0.05 ± 0.02 mg/kg, 14.90 ± 5.35 mg/kg, 22.38 ± 3.04 mg/kg, and 68.07 ± 22.71 mg/kg, respectively. Correlation analysis, cluster analysis, and principal component analysis indicated that As, Cu, Ni, and Zn likely originated from geogenic processes, Hg and Pb from long-range atmospheric transport, Cd from planting activities, and Cr from Holocene alluvium. The geo-accumulation index and enrichment factor showed that As, Cd, Hg, and Zn are enriched in soils. The Nemerow pollution index showed that 66.67%, 24%, and 1.33% of soil samples were in slight, moderate, and heavy pollution levels, respectively, with Hg being the most important element affecting the comprehensive pollution index. The potential ecological risk index showed that 48.00% and 1.33% of soil samples were in the moderate ecological risk and high potential ecological risk levels, respectively. The non-carcinogenic and carcinogenic human health risk index for adults and children were both less than 1, which was within the acceptable range. This study revealed the accumulation pattern of PTEs in agricultural soils of permafrost regions and provided a scientific basis for research on ecological security and human health.

Heavy metal effects on multitrophic level microbial communities and insights for ecological restoration of an abandoned electroplating factory site

The response of soil microbes to heavy metal pollution provides a metric to evaluate the soil health and ecological risks associated with heavy metal contamination. However, a multitrophic level perspective of how soil microbial communities and their functions respond to long-term exposure of multiple heavy metals remains unclear. Herein, we examined variations in soil microbial (including protists and bacteria) diversity, functional guilds and interactions along a pronounced metal pollution gradient in a field surrounding an abandoned electroplating factory. Given the stressful soil environment resulting from extremely high heavy metal concentrations and low nutrients, beta diversity of protist increased, but that of bacteria decreased, at high versus low pollution sites. Additionally, the bacteria community showed low functional diversity and redundancy at the highly polluted sites. We further identified indicative genus and "generalists" in response to heavy metal pollution. Predatory protists in Cercozoa were the most sensitive protist taxa with respect to heavy metal pollution, whereas photosynthetic protists showed a tolerance for metal pollution and nutrient deficiency. The complexity of ecological networks increased, but the communication among the modules disappeared with increasing metal pollution levels. Subnetworks of tolerant bacteria displaying functional versatility (Blastococcus, Agromyces and Opitutus) and photosynthetic protists (microalgae) became more complex with increasing metal pollution levels, indicating their potential for use in bioremediation and restoration of abandoned industrial sites contaminated by heavy metals.

Soil heavy metal(loid) pollution and health risk assessment of farmlands developed on two different terrains on the Tibetan Plateau, China

The quality of farmland soils on the Tibetan Plateau is important because of the region's ecological vulnerability and their close link with local food security. Investigation on the pollution status of heavy metal (loid)s (HMs) in the farmlands of Lhasa and Nyingchi on the Tibetan Plateau, China revealed that Cu, As, Cd, Tl, and Pb were apparently enriched, with the soil parent materials being the primary sources of the soil HMs. Overall, the farmlands in Lhasa had higher contents of HMs compared to those in the farmlands of Nyingchi, which could be attributed to the fact that the former were mainly developed on river terraces while the latter were mainly developed on the alluvial fans in mountainous areas. As displayed the most apparent enrichment, with the average concentrations in the vegetable field soils and grain field soils of Lhasa being 2.5 and 2.2 times higher compared to those of Nyingchi. The soils of vegetable fields were more heavily polluted than those of grain fields, probably due to the more intensive input of agrochemicals, particularly the use of commercial organic fertilizers. The overall ecological risk of the HMs in the Tibetan farmlands was low, while Cd posed medium ecological risk. Results of health risk assessment show that ingestion of the vegetable field soils could pose elevated health risk, with children facing greater risk than adults. Among all the HMs targeted, Cd had relatively high bioavailability of up to 36.2% and 24.9% in the vegetable field soils of Lhasa and Nyingchi, respectively. Cd also showed the most significant ecological and human health risk. Thus, attention should be paid to minimize further anthropogenic input of Cd to the farmland soils on the Tibetan Plateau.

Heavy metal(loid)s in agriculture soils, rice, and wheat across China: Status assessment and spatiotemporal analysis

Heavy metal(loid)s (HMs) accumulation in agricultural soils, rice, and wheat is of particular concern in China, while the status and spatio-temporal distribution of HMs in the soil-crops system have been rarely reported at the national scale. This study aimed to summarize the overall pollution status, spatiotemporal patterns, and drivers of HMs in agricultural soil, rice, and wheat nationwide. The metal-polluted data from 1030 agricultural soils, rice, and wheat in China were collected from the literature published from 2000 to 2022. The results showed that Cd was the most prevailing contaminant in soils based on its spatiotemporal distribution and accumulation. The pollution cases and severe pollution percentage of Cd (103 %) and Hg (128 %) show an increasing trend pattern. Mining activities are the main anthropogenic sources of agricultural soil HMs in China. Cd and Pb had the highest exceedance rate in rice (33.5 and 32.2 %) and wheat (25.8 and 30.3 %). The rice from Hunan, Fujian, and Guangxi showed the highest average concentration of Cd and Pb, respectively, while wheat samples from Hubei had the greatest exceedance rate of Pb. Besides, HMs in crops was not usually corresponding to soil HMs but increased gradually from north to south areas. Several mitigation strategies and accurate health risk assessments model of HMs based on bioavailability were also proposed and recommended. Collectively, this review provides valuable information to improve the management of farmland nationwide, optimize the accurate risk assessment, and reduce HMs pollution.