Improved electrolysis of colloid-polluted wastes using ultrasounds and electrocoagulation

Mo(VI) removal from water by aluminum electrocoagulation: Cost-effectiveness analysis, main influencing factors, and proposed mechanisms

Mo(VI) (MoO42-) removal by aluminum electrocoagulation (Al EC) with Al as anodes and cathodes was studied for the first time. At the initial Mo concentrations of 0.3 - 150 mg/L, kinetic analysis and effects of main factors (electrode connection modes, current density (CD), initial pH, and electrolytes) were examined, and potential mechanism of Mo(VI) removal were elucidated. Results showed that CD had significant impacts on anode weight loss, cathode weight loss, and total electrode weight loss (p value < 0.05). Cathode weight loss was higher than anode weight loss. XRD analysis results showed lower crystallinity of scums than that of precipitates. Boehmite was the most prevalent oxide in scums. An appropriate amount of NaCl was beneficial for enhancing the Mo(VI) removal efficiency and reducing the energy consumption of the Al EC process. Electrostatic attraction, surface complexation, hydroxyl exchange, flocculation, and coprecipitation were the main mechanisms involved in the Mo(VI) removal process by Al EC. Al EC outperformed conventional chemical coagulation in terms of Mo(VI) removal at the same dosage of Al. The Mo(VI) removal efficiencies in two real water samples (lake water and river water) reached up to 89.2% and 71.2%, respectively. This study provides novel insights into the strategies for the removal of oxoanionic metal pollutants and reduction of operating cost by Al EC technology.

Microplastics in aquatic environments: A comprehensive review of toxicity, removal, and remediation strategies

The occurrence of microplastics (MPs) in aquatic environments has been a global concern because they are toxic and persistent and may serve as a vector for many legacies and emerging pollutants. MPs are discharged to aquatic environments from different sources, especially from wastewater plants (WWPs), causing severe impacts on aquatic organisms. This study mainly aims to review the Toxicity of MPs along with plastic additives in aquatic organisms at various trophic compartments and available remediation methods/strategies for MPs in aquatic environments. Occurrences of oxidative stress, neurotoxicity, and alterations in enzyme activity, growth, and feeding performance were identical in fish due to MPs toxicity. On the other hand, growth inhibition and ROS formation were observed in most of the microalgae species. In zooplankton, potential impacts were acceleration of premature molting, growth retardation, mortality increase, feeding behaviour, lipid accumulation, and decreased reproduction activity. MPs togather with additive contaminants could also exert some toxicological impacts on polychaete, including neurotoxicity, destabilization of the cytoskeleton, reduced feeding rate, growth, survivability and burrowing ability, weight loss, and high rate of mRNA transcription. Among different chemical and biological treatments for MPs, high removal rates have been reported for coagulation and filtration (>86.5 %), electrocoagulation (>90 %), advanced oxidation process (AOPs) (30 % to 95 %), primary sedimentation/Grit chamber (16.5 % to 58.84 %), adsorption removal technique (>95 %), magnetic filtration (78 % to 93 %), oil film extraction (>95 %), and density separation (95 % to 100 %). However, desirable extraction methods are required for large-scale research in MPs removal from aquatic environments.

Degradation of ammonia nitrogen by an economic combined hydrodynamic cavitation method

Hydrodynamic cavitation (HC) was a kind of advanced oxidation mode. There were defects in the common HC devices, such as high energy consumption, low efficiency, and easy plugging. In order to effectively utilize HC, it was urgent to research new HC devices and used them together with other traditional water treatment methods. Ozone was widely used as a water treatment agent that does not produce harmful by-products. Sodium hypochlorite (NaClO) was efficient and cheap, but too much chlorine will be harmful to water. The combination of ozone and NaClO with the HC device of propeller orifice plate can improve the dissolution and utilization rate of ozone in wastewater, reduce the use of NaClO, and avoid the generation of residual chlorine. The degradation rate reached 99.9% when the mole ratio γ of NaClO to ammonia nitrogen (NH3-N) was 1.5 and the residual chlorine was near zero. As for the degradation rate of NH3-N or COD of actual river water and real wastewater after biological treatment, the ideal mole ratio γ was also 1.5 and the ideal O3 flow rates were 1.0 L/min. The combined method has been preliminarily applied to actual water treatment and was expected to be used in more and more scenarios.

Recent progress on ultrasound-assisted electrochemical processes: A review on mechanism, reactor strategies, and applications for wastewater treatment

The electrochemical advanced oxidation processes (EAOPs) have received significant attention among the many other water and wastewater treatment technologies. However, achieving a desirable removal effect with a single technique is frequently difficult. Therefore, the integration of ultrasound technique with other processes such as electrocoagulation, electro-Fenton, and electrooxidation is a critical way to achieve effective organic pollutants decomposition from wastewater. This review paper is focused on ultrasound-assisted electrochemical (US/electrochemical) processes, so-called sonoelectrochemical processes of various organic pollutants. Emphasis was given to recently published articles for discussing the results and trends in this research area. The use of ultrasound and integration with electrochemical processes has a synergistic impact owing to the physical and chemical consequences of cavitation, resulting in enhancing the mineralization of organic pollutants. Various types of sonoelectrochemical reactors (batch and continuous) employed in the US/electrochemical processes were reviewed. In addition, the strategies to avoid passivation, enhanced generation of reactive oxygen species, and mixing effect are reviewed. Finally, concluding remarks and future perspectives on this research topic are also explored and recommended.

Microplastics in the environment: Occurrence, perils, and eradication

Microplastics (MPs) with sizes < 5 mm are found in various compositions, shapes, morphologies, and textures that are the major sources of environmental pollution. The fraction of MPs in total weight of plastic accumulation around the world is predicted to be 13.2% by 2060. These micron-sized MPs are hazardous to marine species, birds, animals, soil creatures and humans due to their occurrence in air, water, soil, indoor dust and food items. The present review covers discussions on the damaging effects of MPs on the environment and their removal techniques including biodegradation, adsorption, catalytic, photocatalytic degradation, coagulation, filtration and electro-coagulation. The main techniques used to analyze the structural and surface changes such as cracks, holes and erosion post the degradation processes are FTIR and SEM analysis. In addition, reduction in plastic molecular weight by the microbes implies disintegration of MPs. Adsorptive removal by the magnetic adsorbent promises complete elimination while the biodegradable catalysts could remove 70-100% of MPs. Catalytic degradation via advanced oxidation assisted by S O 4 • - or O H • radicals generated by peroxymonosulfate or sodium sulfate are also adequately covered in addition to photocatalysis. The chemical methods such as sol-gel, agglomeration, and coagulation in conjunction with other physical methods are discussed concerning the drinking water/wastewater/sludge treatments. The efficacy, merits and demerits of the currently used removal approaches are reviewed that will be helpful in developing more sophisticated technologies for the complete mitigation of MPs from the environment.

Improving the clarity and sensitization of polysorbate 80 by ultrasonic-assisted ultrafiltration technology

The safety problem of injections caused by clarity has lately become a widely shared concern. Due to the synthesis process, polysorbate 80 had a wide molecular weight distribution, which is also related to the clinical anaphylaxis. In this paper, ultrasonic-assisted ultrafiltration (UAU) technology was firstly applied to regulate colloidal structure and remove macromolecules from polysorbate 80 to improve injection clarity. In the separation process, ultrafiltration molecular weight cut off (MWCO), ultrasonic power and polysorbate 80 concentraion were selected as variables to adjust the separation efficiency. The ultrasonic frequency and power were provided by KQ-700DE ultrasonic system, based on the data analysis by response surface methodology (RSM), the optimal UAU parameters were as follows: ultrafiltration MWCO of 50,000, ultrasonic power of 900 W and polysorbate 80 concentration of 15.00 mg/mL. The experimental transmittance of polysorbate 80 was 87.6% and the qualification rate of clarity was 94.5%, which solved the separation contradiction among yield, clarity and safety. As an innovation in colloidal separation fields, UAU had a vast range of prospects for making use in pharmaceutical area.

Various wastewaters treatment by sono-electrocoagulation process: A comprehensive review of operational parameters and future outlook

Electrochemical processes are a promising alternative to traditional water treatment systems because they have advantages than conventional techniques such as chemical storage, small treatment systems, no alkalinity depletion, remote adjustment, and cost-effectiveness. The most crucial electrochemical method is Electrocoagulation (EC). Through creating cationic species, the EC causes the neutralization of pollutant surface charges and destabilizes suspended, emulsified or dissolved contaminants led to attracting particles of opposite charge and form flocculants. The main drawback of the EC process is a passive film forming on the electrode surface over time. Ultrasonic (US) waves breaking down sediments formed at the electrode surface and generate high amounts of radical species to remove pollutants by creating high-pressure points inside the solution during the cavitation phenomenon. Although EC systems are considered as an exemplary renaissance in water and wastewater treatment, various parameters related to these types of systems in pollutant degradation have not been fully addressed. To present a comprehensive vision of the current state of the art, and progress the treatment efficiency and agitate new studies in these fields, this review aimed to provide an overview of electrocoagulation's application in pollutant degradation, besides the advantages, associated disadvantages and further strategies for improving the performance of this technique. Moreover, this review discussed various parameters affecting the EC/US process, including nanoparticles addition, electrolyte concentration, current intensity, electrode distance, temperature, oxidant addition, pH, pollutant concentration, reaction time, and electrode combination, chloride addition, and ultrasonic frequency. Also, the efficiency of the EC/US process for disinfection, as well as treatment of car-washing, textile, pulp, and paper industry, oily, brewery wastewater, surfactant, humic acid, and heavy metals, are addressed.