Micro-nano structured CoS: An efficient catalyst for peroxymonosulfate activation for removal of bisphenol A

Highly selective regulation of non-radical and radical mechanisms by Co cubic assembly catalysts for peroxymonosulfate activation

Peroxymonosulfate (PMS) activation on efficient catalysts is a promising strategy to produce sulfate radical (SO4-) and singlet oxygen (1O2) for the degradation of refractory organic pollutants. It is a great challenge to selectively generate these two reactive oxygen species, and the regulation mechanism from non-radical to radical pathway and vice versa is not well established. Here, we report a strategy to regulate the activation mechanism of PMS for the selective generation of SO4- and 1O2 with 100 % efficiency by sulfur-doped cobalt cubic assembly catalysts that was derived from the Co-Co Prussian blue analog precursor. This catalyst showed superior catalytic performance in activating PMS with normalized reaction rate increased by 87 times that of the commercial Co3O4 nanoparticles and had much lower activation energy barrier for the degradation of organic pollutant (e.g., p-chlorophenol) (18.32 kJ⋅mol-1). Experimental and theoretical calculation results revealed that S doping can regulate the electronic structure of Co active centers, which alters the direction of electron transfer between catalyst and PMS. This catalyst showed a strong tolerance to common organic compounds and anions in water, wide environmental applicability, and performed well in different real-water systems. This study provides new opportunities for the development of metal catalyst with metal-organic frameworks structure and good self-regeneration ability geared specifically towards PMS-based advanced oxidation processes applied for water remediation.

Efficient Catalytic Elimination of Toxic Volatile Organic Compounds via Advanced Oxidation Process Wet Scrubbing with Bifunctional Cobalt Sulfide/Activated Carbon Catalysts

Advanced oxidation process (AOP) wet scrubber is a powerful and clean technology for organic pollutant treatment but still presents great challenges in removing the highly toxic and hydrophobic volatile organic compounds (VOCs). Herein, we elaborately designed a bifunctional cobalt sulfide (CoS2)/activated carbon (AC) catalyst to activate peroxymonosulfate (PMS) for efficient toxic VOC removal in an AOP wet scrubber. By combining the excellent VOC adsorption capacity of AC with the highly efficient PMS activation activity of CoS2, CoS2/AC can rapidly capture VOCs from the gas phase to proceed with the SO4•- and HO• radical-induced oxidation reaction. More than 90% of aromatic VOCs were removed over a wide pH range (3-11) with low Co ion leaching (0.19 mg/L). The electron-rich sulfur vacancies and low-valence Co species were the main active sites for PMS activation. SO4•- was mainly responsible for the initial oxidation of VOCs, while HO• and O2 acted in the subsequent ring-opening and mineralization processes of intermediates. No gaseous intermediates from VOC oxidation were detected, and the highly toxic liquid intermediates like benzene were also greatly decreased, thus effectively reducing the health toxicity associated with byproduct emissions. This work provided a comprehensive understanding of the deep oxidation of VOCs via AOP wet scrubber, significantly accelerating its application in environmental remediation.

Removal of sulfonamide antibiotics by non-free radical dominated peroxymonosulfate oxidation catalyzed by cobalt-doped sulfur-containing biochar from sludge

The reuse of activated sludge as a solid waste is severely underutilized due to the limitations of traditional treatment and disposal methods. Given that, the sulfur-containing activated sludge catalyst doped with cobalt (SK-Co(1.0)) was successfully prepared by one-step pyrolysis and calcinated at 850 ℃. The generation of CoSx was successfully characterized by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), indicating that the sulfur inside the sludge was the anchoring site for the externally doped cobalt. Cobalt (Ⅱ) (Co2+), as the main adsorption site for peroxymonosulfate(PMS), formed a complex (SK-Co(1.0)-PMS* ) and created the conditions for the generation of surface radicals. The SK-Co(1.0)/PMS system showed high degradation efficiency and apparent rate constants for Sulfamethoxazole (SMX) (91.56% and 0.187 min-1) and Sulfadiazine (SDZ) (90.73% and 0.047 min-1) within 10 min and 30 min, respectively. Three sites of generation of 1O2, which played a dominant role in the degradation of SMX and SDZ in the SK-Co(1.0)/PMS system, were summarized as：sulfur vacancies (SVs), the Co3+/Co2+ cycles promoted by sulfur(S) species, oxygen-containing functional groups (C-O). The degradation mechanisms and pathways had been thoroughly investigated using DFT calculations. In view of this, a new idea for the resource utilization of activated sludge solid waste was provided and a new strategy for wastewater remediation was proposed.

Boosting Peroxymonosulfate Activation via CoS/MXene Nanocomposite for Rhodamine B Degradation under Simulated Sunlight Irradiation

Cobalt-based heterogeneous catalysts have been demonstrated as an effective PMS activator for pollutant degradation. However, the limited active sites on their surface lead to an unsatisfactory catalytic efficiency. Immobilizing the catalysts on the support material can be a promising modification strategy to solve this problem. MXene has been considered as an ideal support material due to its unique morphology and physicochemical properties. Therefore, in this work, the CoS-loaded Ti3 C2 MXene (CoS/Ti3 C2 MXene) catalyst for peroxymonosulfate (PMS) activation was successfully synthesized through a solvothermal method. Under the simulated sunlight irradiation, the CoS/Ti3 C2 MXene+PMS system achieved an impressive efficiency in removing the organic pollutant rhodamine B (97.2 % in 10 min). Among the tested catalysts, 30 %-CoS-TC stood out, exhibited a broad pH tolerance from 5 to 9 and maintained robust degradation performance over cycles. Upon detailed analysis, the degradation mechanism revealed the collaborative action dominated by singlet oxygen, and supplemented by photogenerated holes and superoxide radicals in the process. Notably, the sandwich-like structure of MXene played a pivotal role, not only dispersing the CoS particles evenly on the surface of catalysts, but also providing ample space for the active sites, thus accelerating the PMS activation for the degradation of rhodamine B. Overall, this study developed an innovative MXene-based catalyst for the application of environmental remediation.

Effect and mechanism of phosphate enhanced sulfite activation with cobalt ion for effective iohexol abatement

Sulfate radical (SO4•-)-based advanced oxidation processes (AOPs) from sulfite activation have recently received attention for abatement of microorganic pollutants in the aquatic environments. Trace-level Co(II) has been demonstrated to be effective for promoting sulfite activation (simplified as the Co(II)/sulfite system) and the corresponding radical formation, yet this process is challenged by the limited valence inter-transformation of Co(II)/Co(III). In order to enhance this valence inter-transformation, a novel Co(II)/HPO42-/sulfite system is developed in this work, because HPO42-, as a typical radical scavenging agent, has the advantage of complexing with Co(II) without quenching effect. In this work, complexation of Co(II) with HPO42- can regulate the electronic structure of Co(II), accelerate electron transfer, and promote valence inter-transformation of Co(II)/Co(III) during the sulfite activation process. The Co(II)/HPO42-/sulfite system exhibits superior iohexol abatement performance under circumneutral conditions. For pH 8.0 and Co(II) dose of 1 μM, the iohexol abatement efficiency is as high as 98%, which is considerably higher than that of the Co(II)/sulfite system (50%). SO4•- is identified as the predominant reactive radical contributing to iohexol abatement. The presence of HPO42- broadens the pH adaptability of the Co(II)/sulfite system for iohexol abatement. In addition, the coexisting Cl- exerts an inhibitory effect on iohexol abatement while the other cations and anions show negligible effect. The Co(II)/HPO42-/sulfite system displays good reusability and adaptability towards various organic pollutants. This study highlights the important role of complexation of Co(II) with HPO42- in sulfite activation and provides a feasible idea for abatement of the microorganic pollutants.

Persulfate enhanced removal of bisphenol A by copper oxide/reduced graphene oxide foam: Influencing factors, mechanism and degradation pathway

The CuO/reduced graphene oxide foam (CuO/RGF) with excellent recyclability was prepared via hydrothermal method followed by freeze drying treatment for bisphenol A (BPA) removal via activating peroxydisulfate (PDS). SEM, XRD, XPS, FT-IR, BET, and TG techniques were used to investigate the structure and property of CuO/RGF. The effect of degradation conditions (pH, PDS amount, Cl-, HCO3-, HA and FA) on BPA removal by CuO/RGF were investigated. The result presented that CuO nanosheet was inserted into the RGF carrier with three-dimensional structure. The degradation rate constant of BPA over CuO/RGF (0.00917 min-1) was 1.24 and 6.46 times higher than those of BPA over CuO (0.00714 min-1) and RGF (0.00142 min-1). More importantly, the pore structure of RGF can successfully limit the release of Cu (II) compared to pure CuO. According to quenching test as well as electron spin resonance (EPR) spectra, BPA degradation was triggered by 1O2, •OH and SO4•-, which was the combination of nonradical (1O2) and radical activation of PDS (•OH and SO4•-). The possible degradation route of BPA was proposed based on intermediates obtained by combining solid phase extraction pretreatment technique with high performance liquid-mass spectrometry. After assessing the viability of MCF-7 cells, we can see that the estrogenic activities of treated solution reduced without producing stronger endocrine disruptors.

Carbonate-induced enhancement of phenols degradation in CuS/peroxymonosulfate system: A clear correlation between this enhancement and electronic effects of phenols substituents

This study investigated the enhancement effects of dissolved carbonates on the peroxymonosulfate-based advanced oxidation process with CuS as a catalyst. It was found that the added CO₃^2- increased both the catalytic activity and the stability of the catalyst. Under optimized reaction conditions in the presence of CO₃^2-, the degradation removal of 4-methylphenol (4-MP) within 2 min reached 100%, and this was maintained in consecutive multi-cycle experiments. The degradation rate constant of 4-MP was 2.159 min^-1, being 685% greater than that in the absence of CO₃^2- (0.315 min^-1). The comparison of dominated active species and 4-MP degradation pathways in both CO₃^2--free and CO₃^2--containing systems suggested that more CO₃•^-/¹O₂ was produced in the case of CO₃^2-deducing an electron transfer medium, which tending to react with electron-rich moieties. Meanwhile, Characterization by X-ray photoelectron spectroscopic and cyclic voltammetry measurement verified CO₃^2- enabled the effective reduction of Cu²⁺ to Cu⁺. By investigating the degradation of 11 phenolics with different substituents, the dependence of degradation kinetic rate constant of the phenolics on their chemical structures indicated that there was a good linear relationship between the Hammett constants σ_p of the aromatic phenolics and the logarithm of k in the CO₃^2--containing system. This work provides a new strategy for efficient removal of electron-rich moieties under the driving of carbonate being widely present in actual water bodies.

Engineering active heterojunction architecture with oxygenated-Co, Mo bimetallic sulfide heteronanosheet and graphene oxide for peroxymonosulfate activation

Bimetallic sulfides have distinctive catalytic property in activating peroxymonosulfate (PMS) for water remediation. Polyoxometalates as potential precursors have rarely been reported for the catalytic degradation of refractory organic pollutants. Herein, a composite catalyst of Co-Mo bimetallic sulfides supported onto graphene oxide (O-CoMoS/GO) with a heterojunction architecture was synthesized through a hydrothermal strategy with polyoxometalates ((NH₄)₄[Co^IIMo₆O₂₄H₆]·6H₂O) as the precursor and applied in the PMS activation. This material showed a superior performance for the catalytic degradation of the model organic pollutant, 4-chlorophenol (rapidly removed within 10 min with an apparent reaction rate constant of 0.5458 min^-1). O-CoMoS/GO outperformed most of the reported catalysts in terms of activity and had a strong tolerance towards common organic and inorganic compounds in water, and could perform well in different real water systems. Experimental and theoretical results indicated that the introduction of GO could achieve the enrichment of electrons on the metals and reduce the d band center (ε_d) of Co close to the Fermi level (ε_F), thereby facilitating the interfacial electron transfer process. The activation mechanism was due to the as-prepared bimetallic sulfides and the formation of heterojunction structure with GO, where Co(II) as the active center could be regenerated by the adjacent Mo element (as co-catalyst) and by gathering electrons from GO through the Co/Mo-O-C coupling. This work provides insights into the design of bimetallic sulfide catalysts in activating PMS for water remediation.

Advanced oxidative degradation of sulfamethoxazole by using bowl-like FeCuS@Cu2S@Fe0 catalyst to efficiently activate peroxymonosulfate

A novel hierarchical bowl-like FeCuS@Cu₂S@Fe⁰ nanohybrid catalyst (B-FeCuS@Cu₂S@Fe⁰) was synthesized for removing sulfamethoxazole (SMX) through catalytic activation of peroxymonosulfate (PMS). It was found that this catalyst exhibited excellently high catalytic activity. Under optimized reaction conditions, all the added SMX (12 mg/L) could be completely degraded within 5 min. The SMX degradation followed pseudo first order kinetics with a rate constant k of 0.89 min^-1, being 1.38, 4.51, 8.99 and 35.6 times greater than that of other catalysts including Fe⁰ (0.644 min^-1 in the very initial stage), bowl-like iron-doped CuS (B-FeCuS, 0.197 min^-1), bowl-like CuS (B-CuS, 0.099 min^-1) and Cu₂O (0.025 min^-1), respectively. During the degradation, several reactive oxygen species (·OH, SO₄^·- and ¹O₂) were generated with ·OH as the main one as confirmed by electron paramagnetic resonance analysis. The SMX degradation in the present system included both radical and non-radical mediated processes. A possible mechanistic insight of the PMS activation by bowl Fe⁰ decorated CuS@Cu₂S-based catalyst was proposed according to X-ray photoelectron spectroscopic (XPS) analysis, and the degradation pathway of SMX was speculated by monitoring the degradation intermediates with liquid chromatography coupled with mass spectrometry (LC-MS).

Effective peroxymonosulfate activation by natural molybdenite for enhanced atrazine degradation: Role of sulfur vacancy, degradation pathways and mechanism

In this study, natural molybdenite (MoS₂) was applied to activate peroxymonosulfate (PMS) for the removal of atrazine (ATZ) and its degradation mechanism was investigated. Molybdenite exhibits superior catalytic performance. The best condition for atrazine degradation efficiency (>99%) was obtained with molybdenite concentration of 0.4 g/L, PMS concentration of 0.1 mM, and ATZ concentration of 12 μM within 10 min under experimental conditions. Electron paramagnetic resonance (EPR) test and chemical probe test further proved that HO^• and SO₄^•- played important roles in the molybdenite/PMS system, and SO₄^•- was dominant. Meanwhile, Electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) tests showed that sulfur vacancies and edge sulfur played important roles in the system. Edge sulfur was conducive to Mo⁴⁺ exposure, while sulfur vacancy facilitated electron transfer and reduced Mo⁶⁺ back to Mo⁴⁺. Combined with DFT calculation, the role of sulfur in the degradation process was verified. Besides, five ATZ degradation pathways were proposed. Finally, the degradation ability of the molybdenite/PMS system for different pollutants and in actual water bodies was also explored. This work provided ideas for exploring the degradation of organic contaminants by natural minerals.

A comprehensive review on BPA degradation by heterogeneous Fenton-like processes

Synthetic organic pollutants emanating continuously in the ecosystem have become a global concern because of their toxicity and persistent nature. Bisphenol A (BPA) is one such pollutant which threatens public health and safety. It is a monomer used in manufacturing plastics, polycarbonate resins, epoxy resins and is a well-recognised endocrine disruptor mimicking estrogen. BPA leaches into food and beverages stored in containers causing contamination issues. Its widespread exposure and potential toxicity is an environmental health concern. In this review, a systematic investigation has been carried out on the heterogeneous catalysts used for Fenton-like processes for BPA degradation. The Fenton-like reaction is one such reaction that is used for wastewater remediation purposes. The reaction advances through the generation of powerful oxidizing radicals like •OH and SO₄^•- in the presence of a suitable catalyst. The application of various Fenton catalysts, with their distinguished morphological characteristics, oxidizing properties, toxicity analysis, and the present state of the art of BPA degradation by these catalysts, have been documented in the current work. This review also highlights a few challenges and prospects for analysing degradation products of landfill leachate.

Efficient Activation of Peroxymonosulfate by Cobalt Supported Used Resin Based Carbon Ball Catalyst for the Degradation of Ibuprofen

The extensive use of ibuprofen (IBU) and other pharmaceuticals and personal care products (PPCPs) causes them widely to exist in nature and be frequently detected in water bodies. Advanced catalytic oxidation processes (AOPs) are often used as an efficient way to degrade them, and the research on heterogeneous catalysts has become a hot spot in the field of AOPs. Among transitional metal-based catalysts, metal cobalt has been proved to be an effective element in activating peroxymonosulfate (PMS) to produce strong oxidizing components. In this study, the used D001 resin served as the matrix material and through simple impregnation and calcination, cobalt was successfully fixed on the carbon ball in the form of cobalt sulfide. When the catalyst was used to activate persulfate to degrade IBU, it was found that under certain reaction conditions, the degradation rate in one hour could exceed 70%, which was far higher than that of PMS and resin carbon balls alone. Here, we discussed the effects of catalyst loading, PMS concentration, pH value and temperature on IBU degradation. Through quenching experiments, it was found that SO4− and ·OH played a major role in the degradation process. The material has the advantages of simple preparation, low cost and convenient recovery, as well as realizing the purpose of reuse and degrading organic pollutants efficiently.

Enhanced catalytic sulfamethoxazole degradation via peroxymonosulfate activation over amorphous CoSx@SiO2 nanocages derived from ZIF-67

In this work, the amorphous CoS_x@SiO₂ nanocages were hydrothermally synthesized by sulfurizing ZIF-67@SiO₂ in the presence of thioacetamide (TAA). The catalytic performances of CoS_x@SiO₂ nanocages as heterogeneous catalysts to activate peroxymonosulfate (PMS) for the sulfamethoxazole (SMX) degradation were systematically investigated. 100% SMX was degraded within 6 min in CoS_x@SiO₂/PMS system, indicating that the amorphous CoS_x@SiO₂ nanocages exhibited outstanding sulfate radical-advanced oxidation process (SR-AOP) activity toward SMX degradation due to the regeneration of Co²⁺ by surficial sulfur species like S^2-/S₂^2-. The effects of PMS dosages, initial pH, SMX concentrations and co-existing ions on SMX degradation efficiency were explored in detail. The SMX removal efficiency was obviously improved in the simulated wastewater containing chloride ions (Cl^-) and low-concentration bicarbonate ions (HCO₃^-). The residual PMS and the generated sulfate radical (SO₄·^-) were determined quantitatively in CoS_x@SiO₂/PMS system. A possible mechanism in CoS_x@SiO₂/PMS system was proposed based on the results of quenching experiments, X-ray photoelectron spectroscopy (XPS) analysis, electrochemical tests, and electron spin resonance (ESR). The CoS_x@SiO₂ exhibited good stability and reusability, in which 100% SMX removal was achieved even after five consecutive cycles. This work provided a strategy for regulating the stability of cobalt-based catalyst for efficient pollutant degradation by PMS activation.

Mechanism study of CoS2/Fe(III)/peroxymonosulfate catalysis system: The vital role of sulfur vacancies

Peroxymonosulfate (PMS) activation methods have attractive advantages in advanced oxidation process (AOPs) due to their powerful ability of directly or indirectly generating various reactive oxygen species (ROS). Herein, trace amount of Fe(III) ions were added into the commercial-CoS₂/PMS system to improve the CoS₂/PMS decomposition for organics removal. The organics removal efficiency could reach >90% towards methylene blue (MB), diclofenac sodium (DCF), sulfamethoxazole (SMX) and bisphenol A (BPA) in the CoS₂/Fe(III)/PMS system, with the kinetic apparent rate constant k_obs of 0.141, 0.206, 0.247 and 0.091 min^-1, respectively. The synergistic effect between Fe(III) ions and sulfur-vacancies on CoS₂ for PMS degradation were revealed for the first time in cobalt sulfides/PMS system. Quenching experiments and ESR analysis proved that ¹O₂ was the major ROS and was produced mainly by the hydrolysis of SO₅^•-. Besides, the high degradation efficiency was obtained by the contribution of SO₄^•- and ^•OH. Electron spin-resonance spectroscopy (ESR), cyclic voltammetry (CV) and Raman spectrum data revealed that the addition of Fe(III) ions could optimize the intensity of sulfur vacancies on the CoS₂ surface, which hindered the PMS reduction ability of Co(II), but accelerated the PMS oxidation to form ¹O₂. The degradation path of MB was analyzed by liquid chromatograph-mass spectrometer (LC-MS). The mechanism studies speculated that the sulfur vacancies of CoS₂ provided the binding sites for Fe(III) ions with Co(II), which facilitated the PMS activation by Co(III).

Efficient removal of organic pollutants by a Co/N/S-doped yolk-shell carbon catalyst via peroxymonosulfate activation

Carbon-based catalysts with heteroatom doping and hollow structures are desired for advanced oxidation processes (AOPs). Herein, dual-shelled Co, N, and S codoped hollow carbon nanocages were developed by wrapping zeolitic imidazolate framework-67 (ZIF-67) with trithiocyanuric acid (TCA) and performing subsequent carbonization. The optimal composite catalyst (Co-NC-CoS) exhibited excellent catalytic performance toward different organic pollutants. Almost complete removal of 4-NP (60 mg/L^-1) was achieved within 20 min by 10 mg of catalyst and 0.2 g/L^-1 peroxymonosulfate (PMS). Moreover, the catalyst showed good stability and reusability. The effects of catalyst and PMS dose, pollutant concentration, pH and common anions were investigated, and reactive oxygen species (ROS) were studied by scavenger experiments and electron paramagnetic resonance (EPR) tests. The results show that multidoped atoms S, Co and N all contributed to the degradation system. Several lines of evidence suggested that S could change the catalytic process from Co³⁺/Co²⁺ to Co³⁺/Co²⁺/Co⁰ reduction due to its low redox potential. Degradation was achieved through both radical and nonradical pathways, where sulfate radicals (SO₄^·̶), hydroxyl radicals (^·OH) and singlet oxygen (¹O₂) were primary reactive species. Overall, this work may suggest that the novel multi heteroatom-doped catalysts with complex structures can be developed for environmental remediation.

Heterogeneous electro-Fenton process for degradation of bisphenol A using a new graphene/cobalt ferrite hybrid catalyst

A simple, efficient, environmentally friendly, and inexpensive synthesis route was developed to obtain a magnetic nano-hybrid (GH) based on graphene and cobalt ferrite. Water with a high content of natural organic matter (NOM) was used as solvent and a source of carbon. The presence of NOM in the composition of GH was confirmed by FTIR and Raman spectroscopy, which evidenced the formation of graphene, as also corroborated by XRD analyses. The diffractograms and TEM images showed the formation of a hybrid nanomaterial composed of graphene and cobalt ferrite, with crystallite and particle sizes of 0.83 and 4.0 nm, respectively. The heterogeneous electro-Fenton process (EF-GH) achieved 100% degradation of bisphenol A (BPA) in 50 min, with 80% mineralization in 7 h, at pH 7, using a current density of 33.3 mA cm^-2. The high catalytic performance was achieved at neutral pH, enabling substantial reduction of the costs of treatment processes. This work contributes to understanding the role of NOM in the synthesis of a magnetic nano-hybrid based on graphene and cobalt ferrite, for use in heterogeneous catalysis. This nano-hybrid has excellent potential for application in the degradation of persistent organic pollutants found in aquatic environments.

HPO42- enhanced catalytic activity of N, S, B, and O-codoped carbon nanosphere-armored Co9S8 nanoparticles for organic pollutants degradation via peroxymonosulfate activation: critical roles of superoxide radical, singlet oxygen and electron transfer

In this study, we report a facile synthesis of a novel N, S, B, and O-codoped carbon nanosphere-armored Co9S8 nanoparticle composite (Co9S8@NSBOC) and its superior activation performance toward peroxymonosulfate (PMS) for methylene blue (MB) and ofloxacin degradation. The effects of various experimental parameters and the general applicability of the catalyst were investigated. Particularly, Co9S8@NSBOC exhibited high catalytic activity in a wide pH range of 3-12 and HPO42- exhibited a synergic catalytic effect with Co9S8@NSBOC in the degradation system. Radical quenching tests, EPR measurements and electrochemical analysis demonstrated that the degradation mechanism of pollutants in the Co9S8@NSBOC/PMS system included both radical and non-radical pathways, in which ˙O2-, 1O2 and electron transfer played dominant roles. Co2+, S2-, carbon defects, C[double bond, length as m-dash]O/C-O-C, pyridinic-N, graphitic-N, BC2O and C-S-C species on Co9S8@NSBOC, all contributed to PMS activation. The degradation pathways of MB and ofloxacin were proposed based on HPLC-MS/MS analysis of their degradation intermediates. This work not only presents a facile and practical synthetic method of cobalt sulfide-coupled multi-heteroatom-doped carbocatalysts, but also provides useful insights into their active sites and activation mechanisms toward PMS activation.

Impact factors of the degradation of bisphenol A by nitrocellulose membrane under illumination

Nitrocellulose membrane (NCM) can produce hydroxyl radicals under illumination, which promotes the oxidative degradation of organic pollutants. In this paper, NCM was used to oxidize bisphenol A (BPA) under simulated sunlight. The effects of pH, temperature, light intensity, anion and cation on the degradation of BPA were analyzed. The photodegradation process of BPA was discussed. The optimal photolysis rate was 0.031 min^-1 when the temperature was 30°C, the light intensity was 2.67 × 10⁴ Lux, and the pH value was 9.0. The alkaline environment, temperature and light intensity can promote the photodegradation of BPA. Except for nitrate ions, anions and cations can inhibit the photodegradation of BPA. Compared with cations, anions have a greater inhibitory effect on BPA degradation. The degradation products of BPA by NCM were analyzed by gas chromatographic/mass. This study may provide useful information for the BPA degradation by NCM in complex water samples.

Conversion of Co Nanoparticles to CoS in Metal-Organic Framework-Derived Porous Carbon during Cycling Facilitates Na2S Reactivity in a Na-S Battery

Room-temperature sodium-sulfur batteries have attracted wide interest due to their high energy density and high natural abundance. Polysulfide dissolution and irreversible Na₂S conversion are challenges to achieving high battery performance. Herein, we utilize a metal-organic framework-derived Co-containing nitrogen-doped porous carbon (CoNC) as a catalytic sulfur cathode host. A concentrated sodium electrolyte based on sodium bis(fluorosulfonyl)imide, dimethoxyethane, and bis(2,2,2-trifluoroethyl) ether is used to mitigate polysulfide dissolution. We tune the amount of Co present in the CoNC carbon host by acid washing. Significant improvement in reversible sulfur conversion and capacity retention is observed with a higher Co content in CoNC, with 600 mAh g^-1 and 77% capacity retention for CoNC and 261 mAh g^-1 and 56% capacity retention for acid-washed CoNC at cycle 50 at 80 mAh g^-1. Post-mortem X-ray photoelectron spectroscopy, transmission electron microscopy, and selected area electron diffraction suggest that CoS is formed during cycling in place of Co nanoparticles and CoN₄ sites. Raman spectroscopy suggests that CoS exhibits a catalytic effect on the oxidation of Na₂S. Our findings provide insights into understanding the role Co-based catalysts play in sulfur batteries.

Core–shell-structured MOF-derived 2D hierarchical nanocatalysts with enhanced Fenton-like activities

The fabricated core–shell-structured MOF-derived 2D nanocatalysts with Co/Co-N_x co-doping N-CNTs enhance Fenton-like activities for the water remediation of benzene-derived contaminants.