Hierarchical construction of a new Z-scheme Bi/BiVO4-CdS heterojunction for enhanced visible-light photocatalytic degradation of tetracycline hydrochloride

Vacancy Engineering in 2D Transition Metal Chalcogenide Photocatalyst: Structure Modulation, Function and Synergy Application

Transition metal chalcogenides (TMCs) are widely used in photocatalytic fields such as hydrogen evolution, nitrogen fixation, and pollutant degradation due to their suitable bandgaps, tunable electronic and optical properties, and strong reducing ability. The unique 2D malleability structure provides a pre-designed platform for customizable structures. The introduction of vacancy engineering makes up for the shortcomings of photocorrosion and limited light response and provides the greatest support for TMCs in terms of kinetics and thermodynamics in photocatalysis. This work reviews the effect of vacancy engineering on photocatalytic performance based on 2D semiconductor TMCs. The characteristics of vacancy introduction strategies are summarized, and the development of photocatalysis of vacancy engineering TMCs materials in energy conversion, degradation, and biological applications is reviewed. The contribution of vacancies in the optical range and charge transfer kinetics is also discussed from the perspective of structure manipulation. Vacancy engineering not only controls and optimizes the structure of the TMCs, but also improves the optical properties, charge transfer, and surface properties. The synergies between TMCs vacancy engineering and atomic doping, other vacancies, and heterojunction composite techniques are discussed in detail, followed by a summary of current trends and potential for expansion.

A novel ZnCo2O4/BiOBr p-n/Z-scheme heterojunction photocatalyst for enhancing photocatalytic activity

In this study, we developed a novel p-n/Z-scheme heterojunction photocatalyst, ZnCo2O4/BiOBr (ZCo/BB), through a straightforward and safe hydrothermal-calcination-solvent thermal method. The composite photocatalyst demonstrated exceptional photocatalytic efficacy, particularly when the mass ratio of ZnCo2O4 was 25% (referred to as 25% ZCo/BB). Structural characterization and electrochemical analysis revealed that 25% ZCo/BB exhibited a larger specific surface area and a faster electron transfer rate. Under visible light exposure for 30 min, methylene blue (MB) degradation reached 92%, and the reaction rate constants were 8.2 and 3.7 times higher than those observed for individual ZnCo2O4 and BiOBr, respectively. Furthermore, the 25% ZCo/BB demonstrated exceptional photocatalytic stability over four cycles, maintaining over 80% MB degradation after each cycle. The outstanding photocatalytic activity was attributed to the p-n/Z-scheme heterojunction construction, which promoted charge separation and inhibited carrier recombination. In addition, ·OH and h+ were the major active species in photocatalysis, and · O 2 - was identified as a secondary active species. This work presents an efficient heterojunction photocatalyst for the degradation of organic wastewater.

Underwater bubbling plasma assisted with persulfate activation for the synergistic degradation of tetracycline hydrochloride

The performance and mechanism of persulfate consisting of peroxymonosulfate (PMS) and peroxydisulfate (PDS) activation by underwater bubbling plasma (UBP) for the synergistic removal of tetracycline hydrochloride (TCH) were comparatively investigated. Both PMS and PDS addition significantly promoted the removal of TCH in UBP system, indicating persulfate exhibited highly synergistic effect with UBP. Furthermore, enhancing the persulfate dosage, peak voltage and pulse frequency, as well as reducing initial TCH concentration were favorable for the elimination of TCH. Compared with neutral condition, acidic and alkaline condition were advantageous to TCH removal. The presence of coexisting substances including Cl-, SO42- and humic acid (HA) had an adverse effect on TCH degradation, while Fe2+ could improve the removal of TCH. The degradation of ciprofloxacin and metronidazole proved the applicability for other antibiotics degradation of the reaction system. SO4-·, ·OH, ·O2-, hydrated electrons, O3 and H2O2 were the active substances responsible for TCH removal. The reduction of aqueous O3 concentration and enhancement of H2O2 concentration were observed after persulfate addition. UV-vis spectra and TOC analysis illustrated the addition of PMS or PDS facilitated the degradation and mineralization of TCH. 3D-EEMF spectra visually displayed the degradation process of TCH. Plausible degradation routes were deduced based on LC-MS and the toxicities of TCH and its intermediates were evaluated by Toxicity Estimation Software Tool.

Novel Z-scheme MgFe2O4/Bi2WO6 heterojunction for efficient photocatalytic degradation of tetracycline hydrochloride: Mechanistic insight, degradation pathways and density functional theory calculations

In this study, a new Z-scheme MgFe2O4/Bi2WO6 heterojunction was successfully prepared by hydrothermal and wet ball milling process. The results of the study showed that after 90 min of visible light exposure, the photocatalytic degradation of tetracycline hydrochloride (TCH) by 25%-MgFe2O4/Bi2WO6 heterojunction was as high as 95.82%, and the highest photocatalytic rate (0.0281 min-1) was 4.61 and 3.43 times higher than that of pure Bi2WO6 (0.0061 min-1) and MgFe2O4 (0.0082 min-1), respectively. Furthermore, spin-polarized density functional theory (DFT) calculations were performed to provide additional evidence of the presence of a Z-scheme charge transfer mechanism between MgFe2O4 and Bi2WO6. We investigated the effects of initial TCH concentration, pH, coexisting ions and different water sources on the efficiency of photocatalytic degradation of TCH in composite samples. The recovery experiments demonstrated that the MgFe2O4/Bi2WO6 composites had good stability and repeatability. A series of experimental results showed that 25%-MgFe2O4/Bi2WO6 had a larger specific surface area, better ultraviolet and visible absorbance, superior charge transfer and higher efficiency of photogenerated electron-hole pair separation. This paper provides new ideas for the design and preparation of new Z-scheme heterojunctions and has great prospects for practical applications in the field of wastewater treatment.

Potential of novel dual Z-scheme carbon quantum dots decorated MnIn2S4/CdS/Bi2S3 heterojunction for environmental applications

In this work, CQDs decorated MnIn₂S₄/CdS/Bi₂S₃ heterojunction was prepared successfully by hydrothermal technique for photocatalytic disinfection of Escherichia coli (E. coli) and mineralization of methyl orange (MO) dye. The charge transferal route and mineralization process in CQDs-MnIn₂S₄/CdS/Bi₂S₃ heterojunction were comprehensively investigated by advanced spectroscopic techniques. The improved visible-light activity and enhanced photo-generated charge transferal efficacy caused dual Z-scheme CQDs-MnIn₂S₄/CdS/Bi₂S₃ heterojunction to achieve boosted photodegradation ability. The catalytic degradation trend was followed as CQDs-MnIn₂S₄/CdS/Bi₂S₃ > MnIn₂S₄ > CdS > Bi₂S₃. The dye was mineralized within 180 min under visible light irradiation. The effect of reaction parameters, pH effect, catalyst dosage, and H₂O₂ addition on MO degradation was also investigated. The degradation rate was maximal at pH 4 with a pseudo-first-order rate constant, 0.0438 min^-1. The assessment of antibacterial properties revealed that CQDs-MnIn₂S₄/CdS/Bi₂S₃ composite effectively inactivated E. coli under visible light. Scavenging experiments, transient photocurrent response, and electron spin resonance spectroscopy suggested that ^•[Formula: see text] and holes were the dominant reactive species. The Z-scheme heterojunction is recyclable up to ten photocatalytic cycles according to recycling experiments. This research indicates the importance of dual Z-scheme CQDs decorated MnIn₂S₄/CdS/Bi₂S₃ heterojunction in wastewater remediation.

The Ovs surface defecting of an S-scheme g-C3N4/H2Ti3O7 nanoheterostructures with accelerated spatial charge transfer

Semiconductor photocatalysis was a rising star in the sustainable transformation of solar energy for environmental problems governance. Herein, an S-scheme g-C₃N₄/H₂Ti₃O₇ heterostructure was constructed and applied to tetracycline hydrochloride (TCH) destruction. The g-C₃N₄/H₂Ti₃O₇ composite has a superior photocatalytic property to degrade TCH in contrast with bare g-C₃N₄ and H₂Ti₃O₇. The 20% g-C₃N₄/H₂Ti₃O₇ (CNHTO20) composite exhibited the optimum photocatalytic performance, and the degradation efficiency of 20 mg/L TCH reached 87.37% within 3 h (K = 0.572 min^-1). The affluent active sites of the g-C₃N₄ nanosheet and effective interfacial charge separation of the S-scheme pathway facilitated the excellent performance. Moreover, the ample oxygen vacancies (Ovs) act as the electron mediator, not only reducing the band gap energy by producing the formation of defect levels, but also broadening the photo response range and promoting the interfacial charge transfer. The coordination complexes formed between TCH molecules and Ti (IV) ions in CNHTO20 composites induce strong visible light absorption through ligand-metal charge transfer (LMCT). The Ti⁴⁺/Ti³⁺ metal cycle in CNHTO20 was conducive to the separation of the photogenerated electron-hole pairs on the heterojunction interface as well. The ESR characterization and trapping experiments certified that the dominant substances were OH, O₂^- and h⁺. The AQY calculated by the COD removal rate was 0.16%. Conclusively, the S-scheme heterojunction between H₂Ti₃O₇ and g-C₃N₄ enabled the CNHTO photocatalyst with high redox ability and boosted photocatalytic performance accordingly. This study may shed some enlightenment on the construction of heterojunctions and the realistic treatment of wastewater.

Facile synthesis of nanostrip-structured pseudo-boehmite "nest" for nano-TiO2/γ-Al2O3construction to remove tetracycline hydrochloride in water

A particular bird's nest-like pseudo-boehmite (PB) composed of cohesive nanostrips was prepared by a novel and facile approach based on the reaction of Al-Ga-In-Sn alloy and water, together with ammonium carbonate. The PB possesses a large specific surface area (465.2 m²g^-1), pore volume (1.0 cm³g^-1), and pore diameter (8.7 nm). Subsequently, it was utilized as a precursor to form the TiO₂/γ-Al₂O₃nanocomposite for tetracycline hydrochloride removal. The removal efficiency can reach above 90% at TiO₂:PB = 1:1.5 under the Sunlight irradiation simulated by a LED lamp. Our results indicate that the nest-like PB is a promising carrier precursor for efficient nanocomposite catalysts.

Fabrication of Z-scheme Cd0.85Zn0.15S/Co9S8dual-functional photocatalyst for effective hydrogen evolution and organic pollutant degradation

A Z-scheme Cd_0.85Zn_0.15S/Co₉S₈(CZS-CS) photocatalyst was reasonably fabricated by a simple solvothermal method for the effective visible-light-driven H₂evolution and organic pollutants degradation. The precise construction of the CZS-CS composites provided an efficient heterogeneous contact interface and abundant reaction sites for the proposed photocatalytic reaction. The homogeneous Co₉S₈nanocrystals were uniformly wrapped on the surface of Cd_0.85Zn_0.15S nanorods, forming an intimate-contact interface, markedly contributed to the light collection and effectively inhibited the charge-carrier recombination. The optimized CZS-CS-15 composites exhibited a special H₂production rate reaching 19.15 mmol·h^-1·g^-1, roughly 1915 and 4.5 times of pure Co₉S₈and Cd_0.85Zn_0.15S samples and 85% of tetracycline (TC) molecule within 15 min was degraded. Furthermore, trapping experiments confirmed that h⁺was the main active species for TC photodegradation. Moreover, the obtained photocatalysts manifested stability without apparent activity declines during the proposed reactions. Finally, the Z-scheme photocatalytic mechanism was verified to illustrate the characteristics of efficient charge transfer and high redox ability. This study provided a rational and learnable strategy for designing dual-functional Z-scheme heterojunction photocatalysts.

Efficient electron transfer and copper species transformation under the synergy of BiVO4 and novel Cu2(OH)3F nanosheets

Here, we report a simple and efficient strategy for evenly in situ growth of Cu₂(OH)₃F nanosheets on BiVO₄ spheres as a novel photo-Fenton-like catalyst using hydrothermal method. The Cu₂(OH)₃F/BiVO₄ composite catalysts showed great performance for the organic pollutants degradation under visible light irradiation due to the efficient electron transfer and copper species transformation. The synergetic between Cu₂(OH)₃F and BiVO₄ not only promoted the separation of electrons and holes but also enhanced the Cu²⁺ reduction, thus produced more strong oxidative radicals under a wide pH value range. The activity of Cu₂(OH)₃F/BiVO₄ composite for methylene blue degradation was 6.03 and 5.47 times more than that of pristine Cu₂(OH)₃F and BiVO₄, respectively. The composite catalysts were characterized with various methods and their stability and adaptability were also evaluated. Finally, a possible photo-Fenton-like reaction mechanism was also proposed based on the band structure/position and reaction species.

Direct Z-scheme heterojunction Bi/Bi2S3/α-MoO3 photoelectrocatalytic degradation of tetracycline under visible light

A hot research topic in visible-light-driven photoelectrocatalytic (PEC) oxidation technology is the development of superior photoanode materials. The design of the photoanode system with a direct Z-scheme charge transfer mechanism is crucial to achieving effective charge separation for sustainable photoelectrocatalysis. Here, a novel Bi/Bi2S3/α-MoO3 heterostructure was successfully assembled by a simple and feasible strategy. The direct Z-scheme heterogeneous formed between Bi2S3 and α-MoO3 has the advantages of low resistance, high optical response current and the surface plasmon resonance (SPR) effect of Bi nanoparticles (Bi NPs). Thus, the efficiency of photogenerated carrier separation and transfer is further enhanced, and the catalytic activity is significantly improved. It is impressive that the unique photoanode has achieved a maximum removal efficiency of 85.8% of tetracycline (TC) pollutants under visible light irradiation within 60 min and has excellent stability, which is expected to degrade antibiotics efficiently and environmentally in harsh environments. These characteristics give Bi/Bi2S3/α-MoO3 promising candidates for practical applications in antibiotic degradation.

A dual-functional catalyst: wood-templated BiVO4-CdS for wood dye wastewater

A large quantity of wastewater is released from wood processing, posing a serious pollution problem to the natural environment. Photocatalysis has become a reliable method for effluent purification. In this paper, balsa-templated BiVO4-CdS (BBC) was synthesized by impregnation calcination and chemical deposition using wood residue as a template. Rhodamine B (RhB) is used as a wood colorant and is present in wood processing wastewater. The performance of BBC in photocatalytic degradation with simultaneous hydrogen production was identified using RhB as simulated wood dye wastewater and a sacrificial electron donor. Compared to the BiVO4-CdS without a template, the BBC exhibited higher photocatalytic degradation performance (98.32%), which was attributed to the laminar porous structure of the wood being replicated. Because of the existence of a porous structure, BBC has better adsorption properties, which accelerated photodegradation and the production process of H2. Furthermore, surface modification with CdS nanoparticles formed Z-scheme heterojunctions, which greatly inhibited the photogenerated electron-hole compounds. When RhB provided electrons to BiVO4 and CdS, it was also removed by the oxidation of h+ and ·OH, which were simultaneously generated by balsa-templated BiVO4-CdS. BBC produced hydrogen at a higher rate (61.2 μmol g-1 h-1), realizing dual-functional photocatalysis. Therefore, the results support further development of dual-functional catalysts by the use of wood residues.

Detoxifying SARS-CoV-2 antiviral drugs from model and real wastewaters by industrial waste-derived multiphase photocatalysts

The use of antiviral drugs has surged as a result of the COVID-19 pandemic, resulting in higher concentrations of these pharmaceuticals in wastewater. The degradation efficiency of antiviral drugs in wastewater treatment plants has been reported to be too low due to their hydrophilic nature, and an additional procedure is usually necessary to degrade them completely. Photocatalysis is regarded as one of the most effective processes to degrade antiviral drugs. The present study aims at synthesizing multiphase photocatalysts by a simple calcination of industrial waste from ammonium molybdate production (WU photocatalysts) and its combination with WO₃ (WW photocatalysts). The X-ray diffraction (XRD) results confirm that the presence of multiple crystalline phases in the synthesized photocatalysts. UV-Vis diffuse reflectance spectra reveal that the synthesized multiphase photocatalysts absorb visible light up to 620 nm. Effects of calcination temperature of industrial waste (550-950 °C) and WO₃ content (0-100%) on photocatalytic activity of multiphase photocatalysts (WU and WW) for efficient removal of SARS-CoV-2 antiviral drugs (lopinavir and ritonavir) in model and real wastewaters are studied. The highest k₁ value is observed for the photocatalytic removal of ritonavir from model wastewater using WW4 (35.64 ×10^-2 min^-1). The multiphase photocatalysts exhibit 95% efficiency in the photocatalytic removal of ritonavir within 15 of visible light irradiation. In contrast, 60 min of visible light irradiation is necessary to achieve 95% efficiency in the photocatalytic removal of lopinavir. The ecotoxicity test using zebrafish (Danio rerio) embryos shows no toxicity for photocatalytically treated ritonavir-containing wastewater, and the contrary trend is observed for photocatalytically treated lopinavir-containing wastewater. The synthesized multiphase photocatalysts can be tested and applied for efficient degradation of other SARS-CoV-2 antiviral drugs in wastewater in the future.

Construction of plasmonic Bi/Bismuth oxycarbonate/Zinc bismuth oxide ternary heterojunction for enhanced charge carrier separation and photocatalytic performances

In this work, a novel plasmonic ternary Bi/Bismuth oxycarbonate/Zinc bismuth oxide (Bi-Bi₂O₂CO₃-ZnBi₂O₄) is synthesized synergistically by a one-step hydrothermal method. The results show that the metallic Bi spheres and ZnBi₂O₄ nanoparticles are uniformly distributed on the surface of flower-like Bi₂O₂CO₃ layer. Compared with the bare ZnBi₂O₄ and Bi-Bi₂O₂CO₃, the ternary Bi-Bi₂O₂CO₃-ZnBi₂O₄ heterojunction displays a significantly improved solar energy harvesting efficiency and enhanced photocatalytic degradation activity for environmental organic pollutants. The degradation efficiency of organics reaches to 98.4% under simulated solar light illumination. The degradation kinetics indicates that the photocatalytic reaction rate constant of ternary system is about 4.4 and 29.5 times higher than that of pure ZnBi₂O₄ and Bi-Bi₂O₂CO₃, respectively. Moreover, O₂^- and h⁺ are the main active species in the photodegradation reaction. The improvement of the photocatalytic activity of the composites is attributed to the synergistic effect of ternary heterostructure and surface plasmon resonance (SPR), which promotes charge transfer and effectively inhibits the recombination of photogenerated carriers.

Facile synthesis of a novel 0D/2D CdS/Bi4TaO8Br heterojunction for enhanced photocatalytic tetracycline hydrochloride degradation under visible light

A novel visible light-responsive 0D/2D CdS/Bi4TaO8Br nanocomposite photocatalyst with enhanced activity was synthesized by the in situ deposition of CdS quantum dots (QDs) on the surface of 2D Bi4TaO8Br nanoplates.