Novel Cd0.5Zn0.5S/Bi2MoO6 S-scheme heterojunction for boosting the photodegradation of antibiotic enrofloxacin: Degradation pathway, mechanism and toxicity assessment

S-Scheme Boron Phosphide/MoS2 Heterostructure with Excellent Light Conversion Ability for Solar Cells and Water Splitting Photocatalysts

Monolayer molybdenum disulfide (MoS2) with a suitable direct band gap and strong optical absorption is very attractive for utilization in solar cells and photocatalytic water splitting. Nevertheless, the broader utilization of MoS2 is impeded by its low carrier mobility and limited responsiveness to infrared light. To overcome these challenges, we constructed a variety of stackings for the boron phosphide (BP)/MoS2 van der Waals heterostructure (vdWH), all of which display S-scheme band alignments except for the AC' stacking. The constituent BP monolayer has superior carrier mobility and strong infrared and visible light response, which makes up for the shortcomings of MoS2. The study revealed that the AB stacking exhibits a remarkable power conversion efficiency of 22.27%, indicating its significant application prospect in solar cells. Additionally, the AB stacking also exhibits a promising application prospect in photocatalytic water splitting due to its suitable band structure, S-scheme band alignment, strong optical adsorption characteristic, high solar-to-hydrogen efficiency, and robust built-in electric field. Meanwhile, applying uniaxial tensile strains along the x-axis direction is more beneficial for photocatalytic water splitting. Hence, the AB-stacked BP/MoS2 vdWH shows significant potential for use in both solar cells and photocatalytic water splitting. This work paves the way for exploring the application of S-scheme heterostructures in solar energy conversion systems.

Novel hollow core-shell Zn0.5Cd0.5S@ZnIn2S4/MoS2 nanocages with Z-scheme heterojunction for enhanced photocatalysis of hydrogen generation

The development of low-cost and efficient metal sulfide photocatalysts through morphological and structural design is vital to the advancement of the hydrogen economy. However, metal sulfide semiconductor photocatalysts still suffer from low carrier separation and poor solar-to-hydrogen conversion efficiencies. Herein, two-dimensional ZnIn2S4 nanosheets were grown on Zn0.5Cd0.5S hollow nanocages to construct Zn0.5Cd0.5S@ZnIn2S4 hollow nanocages for the first time. Novel hollow core-shell Zn0.5Cd0.5S@ZnIn2S4/MoS2 nanocages with Z-scheme heterojunction structures were obtained by incorporating MoS2 nanosheet co-catalyst via the solvothermal method. The resulting Zn0.5Cd0.5S@ZnIn2S4/MoS2 exhibited unique structural and compositional advantages, leading to remarkable photocatalytic hydrogen evolution rates of up to 8.5 mmol·h-1·g-1 without the use of any precious metal co-catalysts. This rate was 10.6-fold and 7.1-fold higher compared to pure ZnIn2S4 and Zn0.5Cd0.5S, respectively. Moreover, the optimized Zn0.5Cd0.5S@ZnIn2S4/MoS2 photocatalyst outperformed numerous reported ZnIn2S4-based photocatalysts and some ZnIn2S4-based photocatalysts based on precious metal co-catalysts. The exceptional photocatalytic performance of Zn0.5Cd0.5S@ZnIn2S4/MoS2 can be attributed to the Z-scheme heterojunction of core-shell structure that enhanced charge carrier separation and transport, as well as the co-catalytic action of MoS2. Overall, the proposed Zn0.5Cd0.5S@ZnIn2S4/MoS2 with heterojunction structure is a promising candidate for the preparation of efficient photocatalysts for solar-to-hydrogen energy conversion.

Constructing a Titanium Silicon Molecular Sieve-Based Z-Scheme Heterojunction with Enhanced Photocatalytic Activity

Titanium silicon molecular sieve (TS-1) is an oxidation catalyst that possesses a long lifetime of charge transfer excited state, high Ti utilization efficiency, large specific surface area, and good adsorption property; therefore, TS-1 acts as a Ti-based photocatalyst candidate. In this work, TS-1 coupled Bi2MoO6 (TS-1/BMO) photocatalysts were fabricated via a facile hydrothermal route. Interestingly, the optimized TS-1/BMO-1.0 catalyst exhibited a decent photodegradation property toward tetracycline hydrochloride (85.49% in 120 min) under the irradiation of full spectrum light, which were 4.38 and 1.76 times compared to TS-1 and BMO, respectively. The enhanced photodegradation property of the TS-1/BMO-1.0 catalyst could be attributed to the reinforced light-harvesting capacity of the photocatalyst, high charge mobility, and suitable band structure for tetracycline hydrochloride degradation. In addition, the mechanism of photocatalytic degradation of tetracycline hydrochloride by the TS-1/BMO-1.0 catalyst was reasonably proposed based on the band structure, trapping, and ESR tests. This research provided feasible ideas for the design and construction of high-efficiency photocatalysts for contaminant degradation.

Combination of advanced biological systems and photocatalysis for the treatment of real hospital wastewater spiked with carbamazepine: A pilot-scale study

Over the past few decades, the increase in dependency on healthcare facilities has led to the generation of large quantities of hospital wastewater (HWW) rich in chemical oxygen demand (COD), total suspended solids (TSS), ammonia, recalcitrant pharmaceutically active compounds (PhACs), and other disease-causing microorganisms. Conventional treatment methods often cannot effectively remove the PhACs present in wastewater. Hence, hybrid processes comprising of biological treatment and advanced oxidation processes have been used recently to treat complex wastewater. The current study explores the performance of pilot-scale treatment of real HWW (3000 L/d) spiked with carbamazepine (CBZ) using combinations of moving and stationary bed bio-reactor-sedimentation tank (MBSST), aerated horizontal flow constructed wetland (AHFCW), and photocatalysis. The combination of MBSST and AHFCW could remove 85% COD, 93% TSS, 99% ammonia, and 30% CBZ. However, when the effluent of the AHFCW was subjected to photocatalysis, an enhanced CBZ removal of around 85% was observed. Furthermore, the intermediate products (IPs) formed after the photocatalysis was also less toxic than the IPs formed during the biological processes. The results of this study indicated that the developed pilot-scale treatment unit supplemented with photocatalysis could be used effectively to treat HWW.

Turning trash to treasure: Innovative use of exhausted desiccant waste supported zinc indium sulphide for sustainable photocatalytic abatement of tetracycline

Employing an affordable and sustainable visible-light-driven system is crucial for organic pollutant abatement, in the field of photocatalysis. In the present investigation, a pioneering photocatalyst zinc indium sulphide, ZnIn2S4 (ZIS) supported on a silica gel matrix, SiO2 (SG) which is the leftover material after multiple rounds of dehumidification processes, was synthesized. The fabrication of the heterojunction facilitated enhancement in light absorption and charge separation efficiency. The photocatalytic performance was evaluated through the degradation of tetracycline (TC) under light irradiation. The nano-photocatalyst experienced detailed analysis using spectroscopic and microscopic methods. The ZIS/SG catalyst exhibited remarkable efficiency in degrading TC under visible light conditions, achieving a nearly 98-99% degradation. This performance surpassed the degradation rates of the original ZIS and SG catalysts by 3.6 and 4.45 times, respectively. Additionally, the catalyst was effectively used to control TC levels in real-time within pharmaceutical plant effluent, resulting in a degradation efficiency of 78.2%. With affordability, enhanced TC mineralization, and recyclability for up to six runs (efficiency ∼ 85%), the ZIS/SG photocatalyst exhibits desirable qualities of an ideal one. This innovative nano-photocatalyst introduces new possibilities for improving the process of photocatalytic decontamination of tenacious emerging pollutants by providing satisfactory reusability and stability.

Effective photocatalytic inactivation of Microcystis aeruginosa by Ag3VO4/BiVO4 heterojunction under visible light

In recent years, photocatalytic technology has been increasingly used for the treatment of algal blooms in water bodies due to its high efficiency and environmental advantages. However, conventional semiconductor materials suffer from high electron-hole recombination rate, low carrier mobility and weak surface adsorption ability, which made their photocatalytic performance limited. Therefore, the photocatalytic performance of the composites can be improved by coupling another semiconductor material to form a heterojunction to accelerate electron transfer. In this study, a novel composite Ag3VO4/BiVO4 (ABV) photocatalyst was successfully prepared by in-situ deposition method for the photocatalytic inactivation of Microcystis aeruginosa (M. aeruginosa) under visible light. The photocatalyst showed excellent photocatalytic activity, and the degradation rate of M. aeruginosa chlorophyll a was up to 99.8% within 4 h under visible light. During the photocatalytic degradation, the morphology of algae cells, the permeability of cell membrane, the organic matter inside and outside the cells, the antioxidant system and the soluble protein were seriously damaged. Moreover, three cycle experiments showed that the prepared ABV photocatalyst had high reusability. Finally, a possible mechanism of M. aeruginosa inactivation was proposed. In general, the synthesized ABV photocatalyst can effectively inactivate cyanobacteria under visible light and provided a new method for M. aeruginosa removal in water.

β-Bi2O3-Bi2WO6 Nanocomposite Ornated with meso-Tetraphenylporphyrin: Interfacial Electrochemistry and Photoresponsive Detection of Nanomolar Hexavalent Cr

Hexavalent chromium exposure via inhalation, ingestion, or both has been proven to adversely affect internal organs, induce toxic effects, cause allergies, and contribute to the development of cancer. It requires a substantial and challenging effort to detect several heavy metal ions conveniently, sensitively, and reliably by using materials that are easy to synthesize and have a high yield. The impact of light on the electrocatalytic oxidation/reduction process proves an environmentally friendly methodology with numerous applications in pollution control. The extensive use of photoactive materials in photoelectrochemical (PEC) sensors necessitates the development of stable and highly effective photoactive materials. Hence, the solvothermal synthesis of the organic-inorganic hybrid nanocomposite β-Bi2O3-Bi2WO6/H2TPP with varying weight percentages of meso-tetraphenylporphyrin (H2TPP) resulted in a selective electrode for electrocatalytic and photoelectrocatalytic reduction of Cr6+ on fluorine-doped tin oxide (FTO) by an adsorption-reduction mechanism. H2TPP increases the active site density and provides an effective surface area for efficient adsorption by providing both pyridinic- and pyrrolic-N atoms to β-Bi2O3-Bi2WO6/H2TPP. H2TPP could effectively adsorb Cr6+ in the β-Bi2O3-Bi2WO6/H2TPP composite system through electrostatic interaction, and the adsorbed Cr6+ ions were reduced to trivalent chromium Cr3+, resulting in promising Cr6+ sensing. The projected density of states and Bader charge calculations result in the electrostatic attraction among the N-2p orbital of H2TPP and the 3d and 4s orbitals of the Cr atom, resulting in the adsorption of the hexavalent Cr atom onto the active center of H2TPP. Moreover, the addition of H2TPP results in the development of a mesoporous surface that offers strong electrical conductivity, a substantial surface area, improved charge-mass transport, intimate contact between the electrolyte and catalyst, an extended fluorescence lifetime, and increased stability. The role of pH values was thoroughly investigated. All electrochemical and photoelectrochemical studies were carried out on 5 wt % H2TPP-ornated β-Bi2O3-Bi2WO6. Nanocomposite β-Bi2O3-Bi2WO6/5 wt % H2TPP demonstrated reliable cyclic stability, reproducibility, good sensitivity (8.005 μA mM cm-2), and a low limit of detection (LOD) (8.0 nM) toward photoelectrocatalytic reduction of Cr6+. The interference study in the presence of a few inorganic entities exhibited excellent selectivity. This tale amplification approach for developing a β-Bi2O3-Bi2WO6/5 wt % H2TPP nanocomposite system suggests a deeper understanding of the application of photoelectrocatalytic reduction of Cr6+ in environmental remediation with real samples under light irradiation.

Reasonable decoration of CuO/Cd0.5Zn0.5S nanoparticles onto flower-like Bi5O7I as boosted step-scheme photocatalyst for reinforced photodecomposition of bisphenol A and Cr(VI) reduction in wastewater

Building S-scheme heterostructures is a sophisticated approach to receiving outstanding catalysts for environmental detoxification. Herein, ternary CuO/Cd0.5Zn0.5S/Bi5O7I (CO/CZS/BOI) nanocomposites were constructed by in-situ decorating of CuO and Cd0.5Zn0.5S nanoparticles onto Bi5O7I micro-sphere in a facile route. The optimal CO/CZS/BOI reflected reinforced bisphenol A (BPA) photo-oxidation (95% in 70 min) and Cr(VI) photo-reduction (96.6 in 60 min) under visible light. Besides, CO/CZS/BOI afforded 5.10 (4.44), 4.42 (3.71), and 6.60 (5.27) fold reinforcement in the BPA (Cr(VI)) photo-reaction rate compared to BOI, CZS, and CO, respectively. This behavior was linked to the development of S-scheme mechanisms resulting from the co-effects of BOI, CZS, and CO in retaining the optimum redox capacity, facilitating the dissolution of photo-carriers, increasing reactive sites, and strengthening the visible-light response. The parameters influencing the catalytic reaction of CO/CZS/BOI, such as light intensity, catalyst dosage, and pH, were deeply studied. The quenching tests declared the prominent roles •O2- and •OH in the breaking down of BPA and the participation of electrons and •O2- in the photocatalytic conversion of Cr(VI). The cyclic tests verified the robust photostability of CO/CZS/BOI, which is associated with the reintegration process between the free h+ coming from CZS and the photo-induced e- of CO and BOI in the S-scheme system. In conclusion, the present study provides a profound understanding of the photo-reaction mechanism of CO/CZS/BOI and introduces a novel concept for constructing a superior dual-Scheme system for efficient wastewater detoxification.

An S-scheme NH2-MIL-101(Fe)@MCN/Bi2O3 heterojunction photocatalyst for the degradation of tetracycline and production of H2O2

Effective and durable photocatalysts are essential for the decomposition of persistent contaminants and the generation of hydrogen peroxide. In this study, we successfully constructed an S-type heterojunction by in situ growing Bi2O3 nanocrystals and NH2-MIL-101(Fe) onto surface-modified g-C3N4. The process of charge transfer in the S-type heterojunction was confirmed using ISI-XPS, DFT calculations, capture experiments, and EPR signals. The combined influence of the heterojunction and MOF demonstrated remarkable photocatalytic performance in the breakdown of tetracycline (TC) and the generation of hydrogen peroxide (H2O2). In the enhanced setup (10%-NH2-MIL-101(Fe)@MCN/Bi2O3), full degradation of TC was accomplished within 50 min under visible light exposure. Additionally, a notable H2O2 yield of 655.63 μmol/g was attained, all achieved without the necessity of sacrificial agents or supplementary oxygen. Based on the outcomes of the dual functionality, the exceptional performance of the ternary composite material can be ascribed to the collaborative influence of the heterojunction and MOF. This collaborative effect expands the light absorption range in the visible region, suppresses the recombination of electron-hole pairs, and enhances the photocatalytic redox ability. The system demonstrates significant potential in the efficient in situ production of H2O2 and removal of recalcitrant organic pollutants in pure water.

Degradation of enrofloxacin by a novel Fe-N-C@ZnO material in freshwater and seawater: Performance and mechanism

In this study, we investigated the doping of Fe-N-C with ZnO (Fe-N-C@ZnO) to enhance its performance in the reduction of biological toxicity and degradation of enrofloxacin (ENR) in seawater. The steady-state/transient fluorescence analysis and free radical quenching test indicated an extremely low electron-hole recombination rate and the generation of reactive oxygen species in Fe-N-C@ZnO, leading to an improvement in the energy efficiency. We compared the ENR degradation efficiencies of Fe-N-C@ZnO and ZnO using both freshwater and seawater. In freshwater, Fe-N-C@ZnO exhibited a slightly higher degradation efficiency (95.00%) than ZnO (90.30%). However, the performance of Fe-N-C@ZnO was significantly improved in seawater compared to that of ZnO. The ENR degradation efficiency of Fe-N-C@ZnO (58.87%) in seawater was 68.39% higher than that of ZnO (34.96%). Furthermore, the reaction rate constant for ENR degradation by Fe-N-C@ZnO in seawater (7.31 × 10-3 min-1) was more than twice that of ZnO (3.58 × 10-3 min-1). Response surface analysis showed that the optimal reaction conditions were a pH of 7.42, a photocatalyst amount of 1.26 g L-1, and an initial ENR concentration of 6.56 mg L-1. Fe-N-C@ZnO prepared at a hydrothermal temperature of 128 °C and heating temperature of 300 °C exhibited the optimal performance for the photocatalytic degradation of ENR. Based on liquid chromatography-mass spectrometry analysis, the degradation processes of ENR were proposed as three pathways: two piperazine routes and one quinolone route.

Development of microbial fuel cell integrated constructed wetland (CMFC) for removal of paracetamol and diclofenac in hospital wastewater

Hospital wastewater management has become a significant concern across the globe due to the presence of pharmaceutically active compounds (PhACs) and other toxic substances, which can potentially disrupt ecosystems. The presence of recalcitrant PhACs in hospital wastewater increases the difficulty level for conventional wastewater treatment systems. Furthermore, incorporating advanced oxidation-based treatment systems increase capital and operation costs. To reduce treatment costs, low-cost innovative technology, i.e., composite constructed wetland and microbial fuel cell system (CMFC), has been developed for higher treatment efficiency of PhACs in hospital wastewater along with simultaneous bioelectricity generation as an additional outcome. In this study, influencing operating parameters, such as initial chemical oxygen demand (COD), electrode spacing, and substrate-to-water-depth ratio, were optimized for two plant species: water hyacinth (WH) and duckweed (DW). The optimized systems were run in batch and continuous mode for WH-CMFC and DW-CMFC to treat synthetic hospital wastewater with paracetamol and diclofenac, and the bioelectricity generation was monitored. DW-CMFC system depicted better treatment efficiency and voltage generation as compared to WH-CMFC. In continuous mode, the DW-CMFC system exhibited a removal of 95.3% COD, 97.1% paracetamol, and 87.5% diclofenac. WH-CMFC and DW-CMFC achieved power densities of around 21.26 mW/m2 and 42.93 mW/m2, respectively. The fate of PhACs during and after treatment and toxicity analysis of the transformation products formed were also carried out. Higher bio-electricity generation and efficient wastewater treatment of the DW-CMFC make it a sustainable option for hospital wastewater management.

Peroxydisulphate activated FTO-WO3 nanorods based photoelectrocatalytic degradation of tetracycline: Intermediate products, degradation pathway and ecotoxicity studies

This work reports sulphate radical assisted photoelectrocatalytic (SR-PEC) degradation of tetracycline using a visible light active fluorine-doped tin oxide - tungsten trioxide nanorods (FTO-WO3 NRs) photoanode. The WO3 NRs were synthesised via the hydrothermal method and then conducted on the FTO glass to form a photoanode. When the photoanode was applied without sulphate radicals for PEC degradation, 10 % of the tetracycline was degraded. Conversely, when 3 mM persulphate was added, the extent of tetracycline degraded was 88 % using the UV-vis spectrophotometer and 99 % using the ultra-performance liquid chromatography mass spectrometer (UPLC-MS) within 90 min at 1.5 V. The mechanism of tetracycline degradation was proposed based on the intermediate products identified using UPLC-MS and the extent of toxicity was evaluated using quantitative structure activity relationship (QSAR) analysis. Trapping experiment revealed that the photogenerated holes, sulphate radicals, and hydroxyl radicals were the oxidants that significantly took part in the degradation of tetracycline. Overall, the electrode was stable and reusable, therefore suggesting the suitability of FTO-WO3 NRs photoanode in the presence of sulphate radicals towards the decontamination of water laden with pharmaceutical pollutants.

A novel tungsten diselenide nanoparticles for enhanced photocatalytic performance of Cr (VI) reduction and ciprofloxacin (CIP)

Nanoparticles (NPs) fabrication is a significant approach to enhance the visible light response of photocatalysts, to realize inexpensive and more harmful compound removal, at larger scale. The poor electrons and holes separation capability and low light activity of bulk materials can be notably enhanced through developing NPs. From photocatalytic investigation, better performance was received in the tungsten diselenide (WSe2) NPs than that in bare WSe2, exhibiting the action of restrained recombination of charge carriers in the NPs. The photocatalytic Cr(VI) reduction efficiency of WSe2 NPs is 2.7 folds greater than that by bare WSe2. On the other hand, the photocatalytic efficiency follows the order of nano WSe2-3 > nano WSe2-2 > nano WSe2-1 > bare WSe2, nano WSe2-3 is nearly 2.7 folds greater than that of bare WSe2. The results imply the fabrication of WSe2 NPs and it possesses improved visible light utilization. The proposed WSe2 NPs have merged with the three aspects of photocatalytic capability including the visible light activity, the valid separation of photo-response charge carriers and enough surface active sites owing to the nanoscale formed. This research endows conduct on the potential style of NPs for photo-response water environmental remediation.

Design and construction of a robust ternary Bi5O7I/Cd0.5Zn0.5S/CuO photocatalytic system for boosted photodegradation of antibiotics via dual-S-scheme mechanisms: Environmental factors and degradation intermediates

The detection of efficacious and environment-friendly nanomaterials with prominent photocatalytic performance is crucial for the detoxification of antibiotics in wastewater. Herein, a dual-S-scheme Bi5O7I/Cd0.5Zn0.5S/CuO semiconductor was designed and fabricated via a simple approach to degrade tetracycline (TC) and other types of antibiotics under LED illumination. However, Cd0.5Zn0.5S and CuO nanoparticles were decorated on the surface of the Bi5O7I microsphere to create a dual-S-scheme system that stimulates visible-light utilization and facilitates the dissolution of excited photo-curriers. Therefore, the Bi5O7I/Cd0.5Zn0.5S/CuO system offers strong redox ability, which reflects reinforced photocatalytic activity and robust stability. The ternary heterojunction discloses enhanced TC detoxification efficiency of 92% in 60 min with TC destruction rate constant of 0.04034 min-1, outperforming pure Bi5O7I, Cd0.5Zn0.5S, and CuO by 4.27, 3.20, and 4.80 folds, respectively. Besides, Bi5O7I/Cd0.5Zn0.5S/CuO manifests outstanding photo-activity against a series of antibiotics like norfloxacin, enrofloxacin, ciprofloxacin, and levofloxacin under the same operational conditions. The active species detection, TC destruction pathways, catalyst stability, and photoreaction mechanisms of Bi5O7I/Cd0.5Zn0.5S/CuO were accurately explained in detail. Summarily, this work introduces a new class of dual-S-scheme system with strengthened catalytic properties to effectively eliminate the antibiotics in wastewater under visible-light illumination.

Boosted Photocatalytic Performance for Antibiotics Removal with Ag/PW12/TiO2 Composite: Degradation Pathways and Toxicity Assessment

Photocatalyst is the core of photocatalysis and directly determines photocatalytic performance. However, low quantum efficiency and low utilization of solar energy are important technical problems in the application of photocatalysis. In this work, a series of polyoxometalates (POMs) [H3PW12O40] (PW12)-doped titanium dioxide (TiO2) nanofibers modified with various amount of silver (Ag) nanoparticles (NPs) were prepared by utilizing electrospinning/photoreduction strategy, and were labelled as x wt% Ag/PW12/TiO2 (abbr. x% Ag/PT, x = 5, 10, and 15, respectively). The as-prepared materials were characterized with a series of techniques and exhibited remarkable catalytic activities for visible-light degradation tetracycline (TC), enrofloxacin (ENR), and methyl orange (MO). Particularly, the 10% Ag/PT catalyst with a specific surface area of 155.09 m2/g and an average aperture of 4.61 nm possessed the optimal photodegradation performance, with efficiencies reaching 78.19% for TC, 93.65% for ENR, and 99.29% for MO, which were significantly higher than those of PW12-free Ag/TiO2 and PT nanofibers. Additionally, various parameters (the pH of the solution, catalyst usage, and TC concentration) influencing the degradation process were investigated in detail. The optimal conditions are as follows: catalyst usage: 20 mg; TC: 20 mL of 20 ppm; pH = 7. Furthermore, the photodegradation intermediates and pathways were demonstrated by HPLC-MS measurement. We also investigated the toxicity of products generated during TC removal by employing quantitative structure-activity relationship (QSAR) prediction through a toxicity estimation software tool (T.E.S.T. Version 5.1.2.). The mechanism study showed that the doping of PW12 and the modification of Ag NPs on TiO2 broadened the visible-light absorption, accelerating the effective separation of photogenerated carriers, therefore resulting in an enhanced photocatalytic performance. The research provided some new thoughts for exploiting efficient and durable photocatalysts for environmental remediation.

Key role of Fe(VI)-activated Bi2WO6 in the photocatalytic oxidation of sulfonamides: Mediated electron transfer mechanism

The widespread use of sulfonamides (SAs) in animals and human infections has raised significant concerns regarding their presence in ambient waterways and potential for inducing antimicrobial resistance. Herein, we report on the capacity of ferrate (VI) (Fe^VIO₄^2-, Fe(VI)) to facilitate the photocatalytic degradation of sulfamethazine (SMT) via bismuth tungstate (Bi₂WO₆, BWO) under blue LED light (Vis/BWO/Fe(VI)) exposure, at rates that were 45-fold faster than BWO photocatalysis. Both the stepwise and time-series addition of Fe(VI) contributed to the degradation. Multiple lines of evidence confirmed that the common reactive species (RSs) in BWO-based photocatalytic systems and Fe(VI)-involved systems (e.g., •OH/h⁺, O₂^•-, ¹O₂ and Fe(V)/Fe(IV)) played subtle roles in our study system. Herein, for the first time, it was discovered that the precursor complex (BWO-Fe(V)/Fe(IV)* )) was the main contributor to induce electron transfer of SAs through the "conductive bridge" effect of BWO. The studied system was able to effectively degrade SMT in synthetic hydrolyzed urine (SHU) with low interference from background substances in water. This work not only offers a novel facilitation strategy for BWO, but also holds a great application prospect for contamination remediation in urine.

Perylene diimide/iron phthalocyanine Z-scheme heterojunction with strong interfacial charge transfer through π-π interaction: Efficient photocatalytic degradation of tetracycline hydrochloride

The development of an all-organic Z-scheme heterojunction photocatalyst with the matched band structure, efficient electron transfer and excellent photocatalytic performance is valuable for a sustainable future. A novel perylene diimide/phthalocyanine iron (PDI/FePc) heterojunctions with strong π-π interaction were synthesized by a self-assembled method, which exhibited strong visible-light-driven photocatalytic degradation activities of tetracycline hydrochloride (TC). The TC removal rate over PDI/FePc was achieved three times and 87.5 times higher than that of PDI and FePc. PDI/FePc (131.1 mv·dec^-1) presented a lower Taffel slope than that of PDI (228.6 mv·dec^-1) for the oxidation. This may be due to the strong π-π interactions between PDI and FePc, which can reduce the layer spacing of the supramolecular structure and facilitate the separation and transfer of photogenerated carriers in the built-in electric field. In addition, radical quenching tests revealed that superoxide radicals (•O₂^-) acted as a dominant role in photocatalytic oxidation. An increscent specific surface area of PDI decorated by FePc also gave the rapid pathway for charge transfer and enhanced the adsorption ability. This provides a new idea for the formation of heterojunction to improve the photocatalytic activity of organic supramolecular materials.

Magnetically separable laccase-biochar composite enable highly efficient adsorption-degradation of quinolone antibiotics: Immobilization, removal performance and mechanisms

The tremendous potential of hybrid technologies for the elimination of quinolone antibiotics has recently attracted considerable attention. This current work prepared a magnetically modified biochar (MBC) immobilized laccase product named LC-MBC through response surface methodology (RSM), and LC-MBC showed an excellent capacity in the removal of norfloxacin (NOR), enrofloxacin (ENR) and moxifloxacin (MFX) from aqueous solution. The superior pH, thermal, storage and operational stability demonstrated by LC-MBC revealed its potential for sustainable application. The removal efficiencies of LC-MBC in the presence of 1 mM 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) for NOR, ENR and MFX were 93.7 %, 65.4 % and 77.0 % at pH 4 and 40 °C after 48 h reaction, respectively, which were 1.2, 1.3 and 1.3 times higher than those of MBC under the same conditions. The synergistic effect of adsorption by MBC and degradation by laccase dominated the removal of quinolone antibiotics by LC-MBC. Pore-filling, electrostatic, hydrophobic, π-π interactions, surface complexation and hydrogen bonding contributed in the adsorption process. The attacks on the quinolone core and piperazine moiety were involved in the degradation process. This study underscored the possibility of immobilization of laccase on biochar for enhanced remediation of quinolone antibiotics-contaminated wastewater. The proposed physical adsorption-biodegradation system (LC-MBC-ABTS) provided a novel perspective for the efficient and sustainable removal of antibiotics in actual wastewater through combined multi-methods.

Interface engineering of Mn3O4/Co3O4 S-scheme heterojunctions to enhance the photothermal catalytic degradation of toluene

Transition metal oxides have high photothermal conversion capacity and excellent thermal catalytic activity, and their photothermal catalytic ability can be further improved by reasonably inducing the photoelectric effect of semiconductors. Herein, Mn₃O₄/Co₃O₄ composites with S-scheme heterojunctions were fabricated for photothermal catalytic degradation of toluene under ultraviolet-visible (UV-Vis) light irradiation. The distinct hetero-interface of Mn₃O₄/Co₃O₄ effectively increases the specific surface area and promotes the formation of oxygen vacancies, thus facilitating the generation of reactive oxygen species and migration of surface lattice oxygen. Theoretical calculations and photoelectrochemical characterization demonstrate the existence of a built-in electric field and energy band bending at the interface of Mn₃O₄/Co₃O₄, which optimizes the photogenerated carriers' transfer path and retains a higher redox potential. Under UV-Vis light irradiation, the rapid transfer of electrons between interfaces promotes the generation of more reactive radicals, and the Mn₃O₄/Co₃O₄ shows a substantial improvement in the removal efficiency of toluene (74.7%) compared to single metal oxides (53.3% and 47.5%). Moreover, the possible photothermal catalytic reaction pathways of toluene over Mn₃O₄/Co₃O₄ were also investigated by in situ DRIFTS. The present work offers valuable guidance toward the design and fabrication of efficient narrow-band semiconductor heterojunction photothermal catalysts and provides deeper insights into the mechanism of photothermal catalytic degradation of toluene.

Rapid photocatalytic reduction of hexavalent chromium over Z-scheme MgIn2S4/BiPO4 heterojunction: Performance, DFT calculation and mechanism insight

The accumulation of highly fluid and biotoxic hexavalent chromium (Cr(VI)) impairs water ecosystems. It is urgent to quickly reduce Cr (VI) to trivalent chromium (Cr (III)) in wastewater. Hereby, Z-scheme MgIn₂S₄/BiPO₄ heterojunction was prepared, and MB-30 (mass ratio of BiPO₄ to composite) presented a rapid Cr(VI) (10 mg L^-1) removal efficiency of 100% within 10 min, its kinetic rate constant was 9.0 and 30.1 folds that of MgIn₂S₄ and BiPO₄, respectively. After four rounds, MB-30 maintained a high removal rate of 93.18% and stabilized crystal texture. First-principles calculations revealed that the formation of Z-scheme heterojunction could ameliorate charge generation, detachment, migration capability, and light utilization. Meanwhile, the coupling of S and O in the two components produced a tight S-O bond, which acted as an atomic-level access to promote carrier migration. The findings were consistent with the structure superiority and optical and electronic properties of MB-30. The Z-scheme pattern was substantiated based on multifarious experiments, which exhibited an elevated reduction potential while emphasizing the significance of interfacial chemical bond and the internal electric field (IEF) on carrier detachment and migration.

BiOI/Bi2MoO6 p-n Junction to Enhance Visible Light Photocatalytic Activity toward Environmental Remediation

Photocatalytic degradation of organic pollutants via semiconductors with high visible light response and effective carrier separation is an economical and green route to greatly achieve environmental remediation. Herein, an efficient BiOI/Bi₂MoO₆ p-n heterojunction was in situ fabricated through hydrothermal method by substituting Mo₇O₂₄^6- species for I ions. The characteristic p-n heterojunction exhibited a strongly enhanced visible light responsive absorption from 500 to 700 nm owing to the narrow band gap of BiOI and a greatly effective separation of photoexcited carriers because of the built-in electric field on the interface between BiOI and Bi₂MoO₆. Moreover, the flower-like microstructure also promoted the adsorption of organic pollutants owing to the large surface area (about 10.36 m²/g), good for further photocatalytic degradation. As a result, BiOI/Bi₂MoO₆ p-n heterojunction showed an excellent photocatalytic activity of RhB of almost 95% in a short time of 90 min under wavelength longer than 420 nm, 2.3 and 2.7 times higher compared with single BiOI and Bi₂MoO₆, respectively. This work offers a promising approach to purify the environment through the utilization of solar energy by constructing efficient p-n junction photocatalysts.

Fabrication of direct Z-scheme Cu2O@V-CN (octa) heterojunction with exposed (111) lattice planes and nitrogen-rich vacancies for rapid sterilization

The Z-scheme heterojunction has demonstrated significant potential for promoting photogenerated carrier separation. However, the rational design of all-solid Z-scheme heterojunctions catalysts and the controversies about carrier transfer path of direct Z-scheme heterojunctions catalysts face various challenges. Herein, a novel heterojunction, Cu₂O@V-CN (octa), was fabricated using V-CN (carbon nitride with nitrogen-rich vacancies) in-situ electrostatic self-wrapping Cu₂O octahedra. Density functional theory (DFT) calculations revealed that the separation of carriers across the Cu₂O@V-CN (octa) heterointerface was directly mapped to the Z-scheme mechanism compared to Cu₂O/V-CN (sphere). This is because the Cu₂O octahedra expose more highly active (111) lattice planes with more terminal Cu atoms and V-CN with abundant nitrogen vacancies to form delocalized electronic structures like electronic reservoirs. This facilitates the wrapping of Cu₂O octahedra by V-CN and protects their stability via tighter interfacial contact, thus enhancing the tunneling of carriers for rapid photocatalytic sterilization. These findings provide novel approaches for designing high-efficiency Cu₂O-based photocatalytic antifoulants for practical applications.

Surface Plasmon Resonance Induced Photocatalysis in 2D/2D Graphene/g-C3N4 Heterostructure for Enhanced Degradation of Amine-Based Pharmaceuticals under Solar Light Illumination

Pharmaceuticals, especially amine-based pharmaceuticals, such as nizatidine and ranitidine, contaminate water and resist water treatment. Here, different amounts of graphene sheets are coupled with g-C3N4 nanosheets (wt% ratio of 0.5, 1, 3 and 5 wt% of graphene) to verify the effect of surface plasmon resonance introduced to the g-C3N4 material. The synthesized materials were systematically examined by advanced analytical techniques. The prepared photocatalysts were used for the degradation of amine-based pharmaceuticals (nizatidine and ranitidine). The results show that by introducing only 3 wt% graphene to g-C3N4, the absorption ability in the visible and near-infrared regions dramatically enhanced. The absorption in the visible range was 50 times higher when compared to the pure sample. These absorption features suggest that the surfaces of the carbon nitride sheet are covered by the graphene nanosheet, which would effectively apply the LSPR properties for catalytic determinations. The enhancement in visible light absorption in the composite was confirmed by PL analysis, which showed greater inhibition of the electron-hole recombination process. The XRD showed a decrease in the (002) plan due to the presence of graphene, which prevents further stacking of carbon nitride layers. Accordingly, the Gr/g-C3N4 composite samples exhibited an enhancement in the photocatalytic performance, specifically for the 5% Gr/g-C3N4 sample, and close to 85% degradation was achieved within 20 min under solar irradiation. Therefore, applying the Gr/g-C3N4 for the degradation of a pharmaceutical can be taken into consideration as an alternative method for the removal of such pollutants during the water treatment process. This enhancement can be attributed to surface plasmon resonance-induced photocatalysis in a 2D/2D graphene/g-C3N4 heterostructure.

A general way to realize the bi-directional promotion effects on the photocatalytic removal of heavy metals and organic pollutants in real water by a novel S-scheme heterojunction: Experimental investigations, QSAR and DFT calculations

Heavy metals (HMs) often coexist with organic pollutants (OPs) in real surface water. Is it possible to find a general way that the removal of one from these two pollutants will promote the elimination of another pollutant? Herein, the bi-directional promotion effects (BPEs) on synchronous removal of Cr(VI) (i.e., hexavalent chromium) and OPs were achieved by a SnNb₂O₆/CuInS₂ S-scheme heterojunction. Specifically, the apparent rate constants are 0.161 min^-1 [(Cr(VI)] and 0.019 min^-1 [Tetracycline hydrochloride (TCH)] in coexisting Cr(VI)/TCH system (which are 3.74 and 1.58 times, respectively, compared to the mono-pollutant system), indicating OPs indeed can act as hole scavengers (electron donors) to consume plenty of photoinduced holes and enable more photoexcited electrons to attend to Cr(VI) photoreduction. More significantly, OPs (i.e., TCH, atrazine and 4-chlorophenol) with different molecular structures possess different adiabatic ionization potentials (AIPs), in an inversely linear relationship with BPEs, i.e., the lower AIP value is, the higher electron-donating ability is, the better BPEs present. Finally, TCH and its degradation intermediates toxicity was forecasted via quantitative structure-activity relationship, demonstrating the toxicity decrease of TCH during the photocatalytic process. This work provides a general strategy for simultaneous removal of contaminants, contributing to wastewater purification.

Immobilization of Bacillus amyloliquefaciens protease "Neutrase" as hybrid enzyme inorganic nanoflower particles: A new biocatalyst for aldol-type and multicomponent reactions

Organic-inorganic hybrid nanoflowers (hNFs) with commercial protease "Neutrase" is proposed and characterized as efficient and green biocatalysts for promiscuous catalysis in aldol-type and multicomponent reactions. Neutrase hNFs [Neutrase-(Cu/Ca/Co/Mn)₃(PO₄)₂] are straightforwardly prepared through mixing metal ion (Cu²⁺, Ca²⁺, Co²⁺ or Mn²⁺) aqueous solutions with Neutrase in phosphate buffer (pH 7.4, 10 mM) resulting in precipitation (3 days). The hNFs were characterized by various techniques including scanning electron microscopy (SEM), energy dispersive X-ray (EDX), element mapping, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). In SEM images, the metal-Neutrase complexes revealed flower-like or granular structures after hybridization. The effect of metal ions and enzyme concentrations on the morphology and enzyme activity of the Neutrase-hNFs was examined. The synthesized Neutrase-Mn hNFs showed superior activity and stability compared to free Neutrase. Traditional organic CC coupling reactions such as aldol condensation, decarboxylative aldol, Knoevenagel, Hantzsch-type reactions and synthesis of 4H-pyran derivatives were used to test the generality and scope of Neutrase promiscuity, while optimizing conditions for the Neutrase-Mn hNF biocatalyst. Briefly, Neutrase-Mn₃(PO₄)₂ hNFs showed excellent enzyme activity, stability and reusability, qualifying as effective reusable catalysts for coupling reactions under mild conditions.

Immobilization of ZnIn2S4 on sodium alginate foam for efficient hexavalent chromium removal

Photocatalytic technology has been extensively studied in the removal of toxic Cr(VI) from wastewater. However, common powdery photocatalysts suffer from poor recyclability and secondly pollution. Herein, the zinc indium sulfide (ZnIn₂S₄) particles were integrated onto the sodium alginate foam(SA) matrix through a facile way to obtain foam-shape catalyst. Diverse characterization techniques including X-ray diffraction(XRD), Fourier transform infrared(FT-IR), scanning electron microscope(SEM) and X-ray photoelectron spectroscopy(XPS) were employed to reveal the composite compositions, organic-inorganic interface interactions, mechanical property, and pore morphology of the foams. Results demonstrated that the ZnIn₂S₄ crystals wrapped on SA skeleton tightly and constructed a flower-like structure. As-prepared hybrid foam with lamellar structure showed great potential in Cr(VI) treatment due to the presence of macropores and highly available active sites. A maximum Cr(VI) photoreduction efficiency of 93 % were observed over the optimal sample of ZS-1 (with a ZnIn₂S₄:SA mass ratio of 1:1) under visible irradiation. When tested with mixed pollutants (Cr(VI)/dyes), the ZS-1 sample displayed an enhanced removal efficiency of 98 % for Cr(VI) and 100 % for Rhodamine B(RhB). Moreover, the composite maintained prominent photocatalytic performance and a relatively integral 3D structure scaffold after continuous six runs, revealing its superior reusability and durability.

Combining the Potent Reducing Properties of Pecan Nutshell with a Solvent-Free Mechanochemical Approach for Synthesizing High Ag0 Content-Silver Nanoparticles: An Eco-Friendly Route to an Efficient Multifunctional Photocatalytic, Antibacterial, and Antioxidant Material

A straightforward, low-cost, and scalable solid-state mechanochemical protocol for the synthesis of silver nanoparticles (AgNP) based on the use of the highly reducing agri-food by-product pecan nutshell (PNS) is reported herein. Under optimized conditions (180 min, 800 rpm, PNS/AgNO₃ ratio = 55/45 w/w), a complete reduction in silver ions was achieved, leading to a material containing ca. 36% w/w Ag⁰ (X-ray diffraction analysis). Dynamic light scattering and microscopic analysis showed a uniform size distribution (15-35 nm average diameter) of the spherical AgNP. The 2,2-Diphenyl-1-picrylhydrazyl (DPPH) assay revealed lower-although still absolutely high (EC₅₀ = 5.8 ± 0.5 mg/mL)-antioxidant properties for PNS for the further incorporation of AgNP, supporting the efficient reduction of Ag⁺ ions by PNS phenolic compounds. Photocatalytic experiments indicated that AgNP-PNS (0.4 mg/mL) was able to induce the >90% degradation of methylene blue after 120 min visible light irradiation, with good recycling stability. Finally, AgNP-PNS demonstrated high biocompatibility and significantly light-enhanced growth inhibition properties against Pseudomonas aeruginosa and Streptococcus mutans at concentrations as low as 250 μg/mL, also eliciting an antibiofilm effect at 1000 μg/mL. Overall, the adopted approach allowed to reuse a cheap and abundant agri-food by-product and required no toxic or noxious chemicals, making AgNP-PNS a sustainable and easy-to-access multifunctional material.

Fabrication of In-S-co-doped two-dimensional BiOCl coupling with surface hydroxylation toward simultaneously efficient charge separation and redox capability for photocatalytic water remediation

Tailoring energy band structure of bismuth oxychloride (BiOCl)-based photocatalysts by virtue of the metal and/or non-metal elements is one of the promising strategy to address environmental issues, especially plays a crucial role in water remediation. However, it still remains a great challenge to balance the light-harvesting and charge carriers separation. Herein, a feasible strategy was proposed for the simultaneous integration of energy-band modulation and surface hydroxylation to alleviate the as-mentioned contradiction and long-standing issues. By using a simple one-pot hydrothermal method, In-S-co-doped BiOCl photocatalyst coupling with surface hydroxylation (denoted as In/BOC-S-OH) was prepared by the simultaneous co-precipitation and ripening process and exhibited a good photocatalytic activity for removing tetracycline (TC) under visible light-irradiation than the counterparts of In-doped BiOCl (In/BOC), S-doped BiOCl (In/BOC-S) or surface -OH modification BiOCl (In/BOC-OH). Such satisfied photocatalytic efficiency benefits from the synergistic effect on the visible light capture, charge migration and separation associated with the introduction of intermediate energy levels and surface defect, respectively. Accompanying with the introduction of In and S hetero-atoms intercalation, both the potentials of valence and conduction bands were adjusted and the reduction of the bandgap could promote the capture of photons. Meanwhile, the powerful polarization effect associated with the non-uniform charge distribution could promote the special separation of carriers. More importantly, the surface defects induced by hydroxylation could act as traps for photogenerated electrons to stimulate the rapid separation of carriers, thereby causing the cleavage of antibiotics on the catalytic surface. This research offers a reliable strategy and promising scheme via effective solar energy conversion and charge carrier separation to advance photocatalytic wastewater remediation.

Molecularly Imprinted Magnetic Nanocomposite Based on Carboxymethyl Dextrin for Removal of Ciprofloxacin Antibiotic from Contaminated Water

Broad-spectrum antibiotics from the fluoroquinolone family have emerged as prominent water contaminants, among other pharmaceutical pollutants. In the present study, an antibacterial magnetic molecularly imprinted polymer (MMIP) composite was successfully fabricated using carboxy methyl dextrin grafted to poly(aniline-co-meta-phenylenediamine) in the presence of Fe₃O₄/CuO nanoparticles and ciprofloxacin antibiotic. The characteristics of obtained materials were investigated using FTIR, XRD, VSM, TGA, EDX, FE-SEM, zeta potential, and BETanalyses. Afterward, the MMIP's antibacterial activity and adsorption effectiveness for removing ciprofloxacin from aqueous solutions were explored. The results of the antibacterial tests showed that MMIP had an antibacterial effect against Escherichia coli, a Gram-negative pathogen (16 mm), and Staphylococcus aureus, a Gram-positive pathogen (22 mm). Adsorption efficacy was evaluated under a variety of experimental conditions, including solution pH, adsorbent dosage, contact time, and initial concentration. The maximum adsorption capacity (Q_max) of the MMIP for ciprofloxacin was determined to be 1111.1 mg/g using 3 mg of MMIP, with an initial concentration of 400 mg/L of ciprofloxacin at pH 7, within 15 min, and agitated at 25 °C, and the experimental adsorption results were well-described by the Freundlich isotherm model. The adsorption kinetic data were well represented by the pseudo-second-order model. Electrostatic interaction, cation exchange, π-π interactions, and hydrogen bonding were mostly able to adsorb the majority of the ciprofloxacin onto the MMIP. Adsorption-desorption experiments revealed that the MMIP could be retrieved and reused with no noticeable reduction in adsorption efficacy after three consecutive cycles.

Removal Efficiency and Performance Optimization of Organic Pollutants in Wastewater Using New Biochar Composites

The purpose is to optimize the catalytic performance of biochar (BC), improve the removal effect of BC composites on organic pollutants in wastewater, and promote the recycling and sustainable utilization of water resources. Firstly, the various characteristics and preparation principles of new BC are discussed. Secondly, the types of organic pollutants in wastewater and their removal principles are discussed. Finally, based on the principle of removing organic pollutants, BC/zero valent iron (BC/ZVI) composite is designed, among which BC is mainly used for catalysis. The effect of BC/ZVI in removing tetracycline (TC) is comprehensively evaluated. The research results reveal that the TC removal effect of pure BC is not ideal, and that of ZVI is general. The BC/ZVI composite prepared by combining the two has a better removal effect on TC, with a removal amount of about 275 mg/g. Different TC concentrations, ethylene diamine tetraacetic acid (EDTA), pH environment, tert-butanol, and calcium ions will affect the TC removal effect of BC composites. The overall effect is the improvement of the TC removal amount of BC composites. It reveals that BC has a very suitable catalytic effect on ZVI, and the performance of BC composite material integrating BC catalyst and ZVI has been effectively improved, which can play a very suitable role in wastewater treatment. This exploration provides a technical reference for the effective removal of organic pollutants in wastewater and contributes to the development of water resource recycling.

In situ preparation of a Bi2O2CO3/BiOI with 2D/2D p-n heterojunction photocatalyst for water purification under visible light

Introduction: Semiconductors have similar crystal structures and matched energy levels could form a coupled heterojunction at an interface between them which may allow response to visible light, achieving efficient decomposition of organic compounds. Methods: The Bi₂O₂CO₃/BiOI (BOC/BOI) with 2D/2D p-n heterojunction was prepared by one-pot room-temperature strategy. The prepared materials were tested by various technologies, and the three-dimensional structure, light absorption properties, electrochemical properties and other information were obtained. Photocatalytic tests have also been carried out. Results and discussion: BOC/BOI heterojunction with oxygen vacancies showed much higher photocatalytic activity than pure BOC and BOI. For example, the preferred BOC/BOI-0.5 heterojunction of the degradation rate for Rhodamine B (RhB) is 97.6 % within 2 h, which is 15.8 and 2.2 times faster than that of BiOI and BOC. In addition, the removal rates of tetracycline, ciprofloxacin and bisphenol A by BOC/ BOI-0.5 were 92.4, 80.3 and 68.6%, respectively. The 2D/2D structures of BOC/BOI-0.5 with rich in oxygen vacancies combined p-n junction can effectively inhibit the photoinduced electron-hole pair recombination and increase the production of active free radicals. The O₂- and h+ are the main reactants, giving the composite catalyst potential for degrading a variety of pollutants.

Determination of Neonicotinoid Insecticides in Environmental Water by the Enrichment of MIL-53 Mixed Matrix Membrane Coupled with High Performance Liquid Chromatography

Metal organic framework based mixed matrix membranes (MOF-MMMs) were synthesized and applied for dispersive membrane extraction (DME) of four neonicotinoid insecticides (nitenpyram, thiacloprid, imidacloprid, and acetamiprid) in environmental water, combined with high performance liquid chromatography (HPLC) for determination. Several experimental conditions were optimized in detail, involving dosage percentage of MOF, extraction time, sample pH, salinity, type and volume of eluent, and elution time. High sensitivity with limits of detection and quantification were achieved as 0.013-0.064 μg L^-1 and 0.038-0.190 μg L^-1, respectively, and good precision with relative standard deviations were obtained as 3.07-12.78%. The proposed method has been successfully applied to determine four neonicotinoid insecticides in tap water, surface water, and seawater, satisfactory recoveries of spiked water samples were between 72.50 and 117.98%. Additionally, the MOF-MMMs showed good reusability with the extraction efficiencies almost remaining stable after 14 cycles. The MOF-MMMs based DME followed by the HPLC method can be a promising utility for the determination of neonicotinoid insecticides in environmental water samples, with high sensitivity and convenient operation.