Solid-state nuclear magnetic resonance investigations of the nature, property, and activity of acid sites on solid catalysts

Defects tune the acidic strength of amorphous aluminosilicates

Crystalline zeolites have high acidity but limited utility due to microporosity, whereas mesoporous amorphous aluminosilicates offer better porosity but lack sufficient acidity. In this work, we investigated defect engineering to fine-tune the acidity of amorphous acidic aluminosilicates (AAS). Here we introduced oxygen vacancies in AAS to synthesize defective acidic aluminosilicates (D-AAS). 1H, 27Al, and 17O solid-state nuclear magnetic resonance (NMR) studies indicated that defects induced localized structural changes around the acidic sites, thereby modifying their acidity. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy studies substantiated that oxygen vacancies alter the chemical environment of Brønsted acidic sites of AAS. The effect of defect creation in AAS on its acidity and catalytic behavior was demonstrated using four different acid-catalyzed reactions namely, styrene oxide ring opening, vesidryl synthesis, Friedel-Crafts alkylation, and jasminaldehyde synthesis. The defects played a role in activating reactants during AAS-catalyzed reactions, enhancing the overall catalytic process. This was supported by in-situ FTIR, which provided insights into the molecular-level reaction mechanism and the role of defects in reactant activation. This study demonstrates defect engineering as a promising approach to fine-tune acidity in amorphous aluminosilicates, bridging the porosity and acidity gaps between mesoporous amorphous aluminosilicates and crystalline zeolites.

Cu(dppf) complexes can be synthesized from Cu-exchanged solids and enable a quantification of the Cu-accessibility by 31P MAS NMR spectroscopy

Herein, we apply three different copper-exchanged materials (Na-[Al]SBA-15, silica, Na-MCM-22) as hosts for a direct synthesis of CuI(1,1'-bis(diphenylphosphino)ferrocene = dppf) complexes in cationic ion exchange position. Using 31P MAS NMR spectroscopy, we show that identical complexes as after ion exchange are generated if the solids are applied as reactants directly. The homogeneity of copper exchanges is evaluated by EDX spectroscopy. Both CuI and CuII result in the formation of complexes, thereby oxidizing dppf. Cu-particles were not reactive. Optimized conditions for a maximized complex formation are identified applying quantitative 31P MAS NMR spectroscopy and ICP-OES. Only accessible copper in cationic position of the solids forms the complexes. This enables a quantification of the amount of copper in mesopores vs. the total copper amount. Thus, besides a new synthesis of the complex a suitable method for quantitative elucidation of the location of copper cations is demonstrated herein.

Precise Structural and Dynamical Details in Zeolites Revealed by Coupling-Edited 1H-17O Double Resonance NMR Spectroscopy

Despite the extensive industrial and research interests in zeolites, their intrinsic catalytic nature is not fully understood due to the complexity of the hydroxyl-aluminum moieties. 17O NMR would provide irreplaceable opportunities for much-needed fine structural determination given the ubiquitous presence of oxygen atoms in nearly all species; however, the low sensitivity and quadrupolar nature of oxygen-17 make its NMR spectroscopic elucidation challenging. Here, we show that state-of-the-art double resonance solid-state NMR techniques have been combined with spectral editing methods based on scalar (through-bond) and dipolar (through-space) couplings, which allowed us to address the subtle protonic structures in zeolites. Notably, the often-neglected and undesired second-order quadrupolar-dipolar cross-term interaction ("2nd-QD interaction") can actually be exploited and can help gain invaluable information. Eventually, a comprehensive set of 1H-17O/1H-27Al double resonance NMR with J-/D-coupling spectral editing techniques have been designed in this work and enabled us to reveal atomic-scale precise structural and dynamical details in zeolites including: 1) The jump rate of the bridging acid site (BAS) proton is relatively low, i.e., far less than 100 s-1 at room temperature. 2) The Al-OH groups with 1H chemical shift at 2.6-2.8 ppm, at least for nonseverely dealuminated H-ZSM-5 catalysts, exhibit a rigid bridging environment similar to that of BAS. 3) The Si-OH groups at 2.0 ppm are not hydrogen bonded and undergo fast cone-rotational motion. The results in this study predict the 2nd-QD interaction to be universal for any rigid -17O-H environment, such as those in metal oxide surfaces or biomaterials.

Spectroscopically Visualizing the Evolution of Hydrogen-Bonding Interactions

Understanding chemical bond variations is the soul of chemistry as it is essential for any chemical process. The evolution of hydrogen bonds is one of the most fundamental and emblematic events during proton transfer; however, its experimental visualization remains a formidable challenge because of the transient timescales. Herein, by subtly regulating the proton-donating ability of distinct proton donors (zeolites or tungstophosphoric acid), a series of different hydrogen-bonding configurations were precisely manipulated. Then, an advanced two-dimensional (2D) heteronuclear correlation nuclear magnetic resonance (NMR) spectroscopic technique was utilized to simultaneously monitor the electronic properties of proton donors and acceptors (2-13C-acetone or trimethylphosphine oxide) through chemical shifts. Parabolic 1H-13C NMR relationships combined with single-well and double-well potential energy surfaces derived from theoretical simulations quantitatively identified the hydrogen bond types and allowed the evolution of hydrogen bonds to be visualized in diverse acid-base interaction complexes during proton transfer. Our findings provide a new perspective to reveal the nature and evolution of hydrogen bonds and confirm the superiority of 2D NMR techniques in identifying the subtle distinctions of various hydrogen-bonding configurations.

Influence of ZSM-5 Crystal Size on Methanol-to-Olefin (MTO) vs. Ethanol-to-Aromatics (ETA) Conversion

Crystal size is a key parameter of zeolites applied as catalysts. Herein, ZSM-5 crystals with similar physicochemical and acid properties, few defects, and aluminum exclusively in tetrahedral coordination are synthesized and the influence of the crystal size on the MTO and ETA conversion is investigated. Short olefins are the main products of the MTO conversion, whereas larger olefins and aromatics dominate the products after ETA conversion. In the case of both feeds, an increased crystal size decreases the catalyst's lifetime. The MTO conversion over larger ZSM-5 altered the product distribution, which was not the case for the ETA conversion. The reason is that the instantly available aromatics during ETA conversion lead to fast coking and zeolite crystals only active in the outer layers. Thus, the different reactivity of different-sized ZSM-5 is direct proof of a different conversion mechanism for both alcohols.

Cu and Zn Bimetallic Co-Modified H-MOR Catalyst for Direct Oxidation of Low-Concentration Methane to Methanol

The direct oxidation of low-concentration methane to value-added chemicals can not only reduce carbon emission but also provide an alternative production route for fossil fuels. Herein, we proposed a novel catalyst for the direct oxidation of low-concentration methane to methanol via the impregnation method, which selected copper and zinc as co-modifiers to modify the MOR catalyst. The highest methanol yield of 71.35 μmol·gcat-1·h-1 was obtained over a bimetallic Cu0.5Zn0.35-MOR catalyst. The catalyst retained good activity after three cycles of testing experiments, indicating good recyclability. Based on the results of performance tests and characterization studies, it was confirmed that Cu species bound to the zeolite framework were the main active sites for methane oxidation. The introduction of Zn decreased the generation of the octahedrally coordinated extra-framework aluminum, which promoted the dispersion of Cu within the zeolite framework. In other words, more tetrahedrally coordinated FAl-stabilized Cu species were presented in our CuZn-MOR catalyst system in comparison to the monometallic Cu-MOR catalyst. Benefiting from the aforementioned modification, the agglomerative sintering of the metal during the reaction was effectively prevented. This work may provide a feasible guide for the future optimization of Cu-based catalysts designed for the selective oxidation of methane.

Influence of Pore Size in Benzoin Condensation of Furfural Using Heterogenized Benzimidazole Organocatalysts

A designed N-heterocyclic carbene (NHC) catalyst was covalently anchored on a range of mesoporous and hierarchical supports, to study the influence of pore size in the benzoin condensation of furfural. The structural and spectroscopic characteristics of the anchored catalysts were investigated, also with the help of molecular dynamics simulations, in order to rationalize the degree of stability and recyclability of the heterogenized organocatalysts. Quantitative yields (99 %) and complete recyclability were maintained after several cycles, vindicating the design rationale.

Structural and Acidic Characteristics of Multiple Zr Defect Sites in UiO-66 Metal-Organic Frameworks

Although defects are prevalent in metal-organic frameworks (MOFs) and usually play a crucial role in modulating their performance in various applications, detailed structural characterizations of various defects remain a challenging task mainly due to their disordered, heterogeneous, and local nature. In this work, by using solid-state nuclear magnetic resonance spectroscopy (SSNMR) techniques in conjunction with density functional theory (DFT) calculations, it is clearly elucidated that the trimethylphosphine (TMP)-assisted ³¹P NMR strategy is capable of greatly facilitating the qualitative and quantitative description of the detailed structural and acidic characteristics as well as the evolution process of various Zr defects with subtle distinctions in UiO-66 upon moderate thermal treatment, hence surpassing most conventional analytical techniques. These results offer a fundamental understanding of the defect chemistry in MOFs.

Enhancement of p-Xylene Selectivity in the Reaction between 2,5-Dimethylfuran and Ethanol over Ammonium Fluoride Modified ZSM-5 Zeolite

The renewable synthesis of p-xylene (PX) via Diels-Alder cycloaddition of biomass derived 2,5-dimethylfuran (2,5-DMF) and ethanol was realized over various catalysts. In the tandem reaction, multiple competitive reactions exist, among...

Hydronium ion and water complexes vs. methanol on solid catalyst surfaces: how confinement influences stability and reactivity

Nature and stability of adsorbed water species on typical solid catalysts are assigned and their stability against desorption is compared with methanol by using quantitative 1H MAS NMR spectroscopy.

Quantitative Distinction between Noble Metals Located in Mesopores from Those on the External Surface

We compare three methods for quantitatively distinguishing the location of noble metal (NM) particles in mesopores from those found on the external support surface. MCM‐41 and SBA‐15 with NM located in mesopores or on the external surface were prepared and characterized by TEM. ³¹P MAS NMR spectroscopy was used to quantify arylphosphines in complexes with NM. Phosphine/NM ratios drop from 2.0 to 0.2 when increasing the probe diameter from 1.08 to 1.54 nm. The reaction between NM and triphenylphosphine (TPP) within 3.0 nm MCM‐41 pores takes due to confinement effects multiple weeks. In contrast, external NM react with TPP instantly. A promising method is filling the pores by using the pore volume impregnation technique with tetraethylorthosilicate (TEOS). TPP loading revealed that 66 % of NMs are located on the external surface of MCM‐41. The pore filling method can be used in association with any probe molecule, also for the quantification of acid sites.

Revealing Brønsted Acidic Bridging SiOHAl Groups on Amorphous Silica-Alumina by Ultrahigh Field Solid-State NMR

Amorphous silica-aluminas (ASAs) are important acidic catalysts and supports for many industrially essential and sustainable processes. The identification of surface acid sites with their local structures on ASAs is of critical importance for tuning their catalytic properties but still remains a great challenge and is under debate. Here, ultrahigh magnetic field (35.2 T) 27Al-{1H} D-HMQC (dipolar-mediated heteronuclear multiple-quantum correlation) two-dimensional NMR experiments demonstrate two types of Brønsted acid sites in ASA catalysts. In addition to the known pseudobridging silanol acid sites, the use of ultrahigh field NMR provides the first direct experimental evidence for the existence of bridging silanol (BS: SiOHAl) acid sites in ASAs, which has been hotly debated in the past few decades. This discovery provides new opportunities for scientists and engineers to develop and apply ASAs in various reaction processes due to the significance of BS in chemical and fuel productions based on its strong Brønsted acidity.

The role of water in the confinement of ibuprofen in SBA-15

The introduction of ibuprofen into mesopores of SBA-15 has been accomplished using the melting method. Samples exhibit from 9 to 33% of the hydrophobic drug. They are not toxic to mouse monocyte-macrophage cells and do not stimulate a pro-inflammatory response. The sample with 25% of the drug showed no crystalline ibuprofen and almost filled the mesopores, while the sample with 33% showed a total filling of the mesopores with some crystalline ibuprofen present. By means of 1D (¹H, ¹³C HPDEC, ¹³C CP MAS) and 2D (¹H-¹H NOESY) MAS NMR spectroscopy, it has been shown that water coexists with ibuprofen in mesopores and has an impact on the mobility of ibuprofen molecules and their location within the sample (outside or inside mesopores). Studies in the dehydrated state show for the first time that the high mobility of ibuprofen in mesopores is directly connected to the presence of water. Dehydrated samples show slightly slower release rates in comparison to their hydrated counterparts.

Mechanism and Kinetics of Acetone Conversion to Isobutene over Isolated Hf Sites Grafted to Silicalite-1 and SiO2

Isolated hafnium (Hf) sites were prepared on Silicalite-1 and SiO₂ and investigated for acetone conversion to isobutene. Characterization by IR, ¹H MAS NMR, and UV-vis spectroscopy suggests that Hf atoms are bonded to the support via three O atoms and have one hydroxyl group, i.e, (≡SiO)₃Hf-OH. In the case of Hf/Silicalite-1, Hf-OH groups hydrogen bond with adjacent Si-OH to form (≡SiO)₃Hf-OH···HO-Si≡ complexes. The turnover frequency for isobutene formation from acetone is 4.5 times faster over Hf/Silicalite-1 than Hf/SiO₂. Lewis acidic Hf sites promote the aldol condensation of acetone to produce mesityl oxide (MO), which is the precursor to isobutene. For Hf/SiO₂, both Hf sites and Si-OH groups are responsible for the decomposition of MO to isobutene and acetic acid, whereas for Hf/Silicalite-1, the (≡SiO)₃Hf-OH···HO-Si≡ complex is the active site. Measured reaction kinetics show that the rate of isobutene formation over Hf/SiO₂ and Hf/Silicalite-1 is nearly second order in acetone partial pressure, suggesting that the rate-limiting step involves formation of the C-C bond between two acetone molecules. The rate expression for isobutene formation predicts a second order dependence in acetone partial pressure at low partial pressures and a decrease in order with increasing acetone partial pressure, in good agreement with experimental observation. The apparent activation energy for isobutene formation from acetone over Hf/SiO₂ is 116.3 kJ/mol, while that for Hf/Silicalite-1 is 79.5 kJ/mol. The lower activation energy for Hf/Silicalite-1 is attributed to enhanced adsorption of acetone and formation of a C-C bond favored by the H-bonding interaction between Hf-OH and an adjacent Si-OH group.

Surface Fingerprinting of Faceted Metal Oxides and Porous Zeolite Catalysts by Probe-Assisted Solid-State NMR Approaches

Acid catalysis in heterogeneous systems such as metal oxides and porous zeolites has been widely involved in various catalytic processes for chemical and petrochemical industries. In acid-catalyzed reactions, the performance (e.g., activity and selectivity) is closely associated with the acidic features of the catalysts, viz., type (Lewis vs Brønsted acidity), distribution (external vs internal surface), strength (strong vs weak), concentration (amount), and spatial interactions of acidic sites. The characterization of local structure and acidic properties of these active sites has important implications for understanding the reaction mechanism and the practical catalytic applications of acidic catalysts. Among diverse acidity characterization approaches, the solid-state nuclear magnetic resonance (SSNMR) technique with suitable probe molecules has been recognized as a reliable and versatile tool. Such a probe-assisted SSNMR approach could provide qualitative (type, distribution, and spatial interactions) and quantitative (strength and concentration) information on each acidic site. This Account aims to integrate our recent important findings in determining the structures and acidic characteristics of some typical metal oxide and zeolite catalysts by using the probe-assisted SSNMR technique, as well as clarifying the continuously evolving process of each discrete acidic site under hydrothermal or chemical treatments even at the molecular level with multiscale theoretical simulations.More specifically, we will describe herein the development and applications of the probe-assisted SSNMR methods, such as trimethylphosphine (TMP) and acetonitrile-d₃ (CD₃CN) in conjunction with advanced two-dimensional (2D) homo- and heteronuclear correlation spectroscopy, for characterizing the structures and properties of acidic sites in varied solid catalysts. Moreover, relevant information regarding the surface fingerprinting of various facets on crystalline metal oxide nanoparticles and active centers inside porous zeolites, the mapping of relevant spatial interactions, and the verification of structure-activity correlation were investigated as well. Relevant discussions are mainly based on the recent NMR experiments of our collaborating research groups, including (i) determining the acidic characterization with probe-assisted SSNMR approaches, (ii) mapping various active centers (or crystalline facets), and (iii) revealing their influence on catalytic performance of solid acid catalyst systems. It is anticipated that this information may provide more in-depth insights toward our fundamental understanding of solid acid catalysis.

Dual Active Sites on Molybdenum/ZSM-5 Catalyst for Methane Dehydroaromatization: Insights from Solid-State NMR Spectroscopy

Methane dehydroaromatization (MDA) on Mo/ZSM-5 zeolite catalyst is promising for direct transformation of natural gas. Understanding the nature of active sites on Mo/ZSM-5 is a challenge for applications. Herein, using 1 H{95 Mo} double-resonance solid-state NMR spectroscopy, we identify proximate dual active sites on Mo/ZSM-5 catalyst by direct observation of internuclear spatial interaction between Brønsted acid site and Mo species in zeolite channels. The acidic proton-Mo spatial interaction is correlated with methane conversion and aromatics formation in the MDA process, an important factor in determining the catalyst activity and lifetime. The evolution of olefins and aromatics in Mo/ZSM-5 channels is monitored by detecting their host-guest interactions with both active Mo sites and Brønsted acid sites via 1 H{95 Mo} double-resonance and two-dimensional 1 H-1 H correlation NMR spectroscopy, revealing the intermediate role of olefins in hydrocarbon pool process during the MDA reaction.

Engineering the Distinct Structure Interface of Subnano-alumina Domains on Silica for Acidic Amorphous Silica-Alumina toward Biorefining

Amorphous silica-aluminas (ASAs) are important solid catalysts and supports for many industrially essential and sustainable processes, such as hydrocarbon transformation and biorefining. However, the wide distribution of acid strength on ASAs often results in undesired side reactions, lowering the product selectivity. Here we developed a strategy for the synthesis of a unique class of ASAs with unvarying strength of Brønsted acid sites (BAS) and Lewis acid sites (LAS) using double-flame-spray pyrolysis. Structural characterization using high-resolution transmission electron microscopy (TEM) and solid-state nuclear magnetic resonance (NMR) spectroscopy showed that the uniform acidity is due to a distinct nanostructure, characterized by a uniform interface of silica-alumina and homogeneously dispersed alumina domains. The BAS population density of as-prepared ASAs is up to 6 times higher than that obtained by classical methods. The BAS/LAS ratio, as well as the population densities of BAS and LAS of these ASAs, could be tuned in a broad range. In cyclohexanol dehydration, the uniform Brønsted acid strength provides a high selectivity to cyclohexene and a nearly linear correlation between acid site densities and cyclohexanol conversion. Moreover, the concerted action of these BAS and LAS leads to an excellent bifunctional Brønsted-Lewis acid catalyst for glucose dehydration, affording a superior 5-hydroxymethylfurfural yield.

Discovery and Supramolecular Interactions of Neutral Palladium-Oxo Clusters Pd16 and Pd24

We report on the synthesis, structure, and physicochemical characterization of the first three examples of neutral palladium-oxo clusters (POCs). The 16-palladium(II)-oxo cluster [Pd16 O24 (OH)8 ((CH3 )2 As)8 ] (Pd16 ) comprises a cyclic palladium-oxo unit capped by eight dimethylarsinate groups. The chloro-derivative [Pd16 Na2 O26 (OH)3  Cl3  ((CH3 )2  As)8 ] (Pd16 Cl) was also prepared, which forms a highly stable 3D supramolecular lattice via strong intermolecular interactions. The 24-palladium(II)-oxo cluster [Pd24 O44 (OH)8 ((CH3 )2 As)16 ] (Pd24 ) can be considered as a bicapped derivative of Pd16 with a tetra-palladium-oxo unit grafted on either side. The three compounds were fully characterized 1) in the solid state by single-crystal and powder XRD, IR, TGA, and solid-state 1 H and 13 C NMR spectroscopy, 2) in solution by 1 H, 13 C NMR and 1 H DOSY spectroscopic methods, and 3) in the gas phase by electrospray ionization mass spectrometry (ESI-MS).

Improved ethanol dehydration catalysis by the superior acid properties of Cs-impregnated silicotungstic acid supported on silica

TOS until deactivation and selectivity in ethanol dehydration can be improved by CsOH impregnation and adjusting surface acid sites of supported silicotungstic acid.

Pentacoordinated Aluminum Species: New Frontier for Tailoring Acidity-Enhanced Silica-Alumina Catalysts

Silica-alumina catalysts, including zeolites and amorphous silica-aluminas (ASAs), are among the most widely used solid acid catalysts and supports to produce petrochemicals, fine chemicals, and renewable energy. The coordination, distribution, and interactions of aluminum in ASAs have an enormous impact on their acidic properties and catalytic performance. Unsaturated tetracoordinated aluminum (Al^IV) species are commonly accepted as the key sites in generating catalytically active Brønsted acid sites (BASs) in silica-alumina catalysts. Extensive efforts focus on increasing the concentration of Al^IV as the main route to enhance their Brønsted acidity for efficient catalysis. However, increasing the Al^IV concentration either weakens the acid strength in zeolites or lowers Brønsted acidity in ASAs at high Al/Si ratios, impeding acidity enhancement of these popular catalysts."Pentacoordinated aluminum (Al^V) species" are potential unsaturated Al species like Al^IV but rarely observed in silica-aluminas, and thus, are widely considered unavailable for BAS formation or surface reactions. In this Account, we will describe novel strategies for the controlled synthesis of Al^V-enriched ASAs using flame-spray pyrolysis (FSP) techniques and highlight the contribution of Al^V species in acidity enhancement, together with their structure-activity relationship in the conversion of biomass-derived compounds into valuable chemicals. Using various in situ and advanced 2D solid-state NMR (SSNMR) experiments, the studies of the acidic properties and local structure of Al^V-enriched ASAs reveal that Al^V species can highly populate on ASA surfaces, promote BASs formation, and facilitate adaptable tuning of BASs from moderate to zeolitic strength by synergy with neighboring Al sites. Moreover, the BASs with enhanced acidity can work jointly with surface Lewis acid sites or metal active species for bifunctional catalysis on Al^V-enriched ASAs. Compared to zeolites, these Al^V-enriched ASAs are highly active in acid-catalyzed biomass conversion, including alcohol dehydration and sugar conversion reactions, as well as in promoting the performance of supported metal catalysts in chemoselective hydrogenation of aromatic ketones. These new insights provide a state-of-the-art strategy for strongly enhancing the acidity of these popular silica-alumina catalysts, which offers an interesting potential for a wide range of acid and multifunctional catalysis.

Solid-state NMR studies of the acidity of functionalized metal-organic framework UiO-66 materials

The acid strength of metal-organic frameworks plays a key role in their catalytic performance such as activity and selectivity during catalytic reactions. Solid-state nuclear magnetic resonance in combination with probe molecules including 2-¹³ C-acetone and pyridine-d₅ was employed to characterize the acid strength of UiO-66-X (X = -H, -2COOH, -SO₃ H). It was found that after introduction of the functional groups, the acid strength of UiO-66-2COOH and UiO-66-SO₃ H is considerably enhanced compared with that of parent UiO-66, with that of the former being similar to that of zeolite H-ZSM-5, and with that of the latter being slightly stronger than that of the former. Even though the acid density can efficiently be modified through changing the relative ratio in multivariate functionalized UiO-66-X, no significant alternation for the acid strength could be discerned in the MTV-UiO-66-X compared with acidic same-link counterpart. Theoretical calculations were employed to further confirm the acid strength of UiO-66-SO₃ H and UiO-66-2COOH.

Effect of aluminum and sodium on the sorption of water and methanol in microporous MFI-type zeolites and mesoporous SBA-15 materials

The interaction and nature of surface sites for water and methanol sorption on MFI-type zeolites and mesoporous SBA-15 were investigated by solid-state NMR spectroscopy and correlated with the desorption enthalpies determined via TGA/DSC. For siliceous Silicalite-1, 29Si CPMAS NMR studies support stronger methanol than water interactions with SiOH groups of Q3-type. On siliceous SBA-15, SiOH groups of Q2-type are accompanied by an enhanced hydrophilicity. In aluminum-containing Na-ZSM-5, Na+ cations are strong adsorption sites for water and methanol as evidenced by 23Na MAS NMR in agreement with high desorption enthalpies of ΔH = 66–74 kJ/mol. Solid-state NMR of aluminum-containing Na-[Al]SBA-15, in contrast, has shown negligible water and methanol interactions with sodium and aluminum. Desorption enthalpies of ΔH = 44–60 kJ/mol hint at adsorption sites consisting of SiOH groups influenced by distant framework aluminum. On H-ZSM-5, Brønsted acidic OH groups are strong adsorption sites as indicated by partial protonation of water and methanol causing low-field shifts of their 1H MAS NMR signals and enhanced desorption enthalpies. Due to the small number of Brønsted acid sites in aluminum-containing H-[Al]SBA-15, water and methanol adsorption on this material is suggested to mainly occur at SiOH groups with distant framework aluminum species, as in the case of Na-[Al]SBA-15.

Solid-state 31P NMR mapping of active centers and relevant spatial correlations in solid acid catalysts

Solid acid catalysts are used extensively in various advanced chemical and petrochemical processes. Their catalytic performance (namely, activity, selectivity, and reaction pathway) mostly depends on their acid properties, such as type (Brønsted versus Lewis), location, concentration, and strength, as well as the spatial correlations of their acid sites. Among the diverse methods available for acidity characterization, solid-state nuclear magnetic resonance (SSNMR) techniques have been recognized as the most valuable and reliable tool, especially in conjunction with suitable probe molecules that possess observable nuclei with desirable properties. Taking ³¹P probe molecules as an example, both trimethylphosphine (TMP) and trimethylphosphine oxide (TMPO) adsorb preferentially to the acid sites on solid catalysts and thus are capable of providing qualitative and quantitative information for both Brønsted and Lewis acid sites. This protocol describes procedures for (i) the pretreatment of typical solid acid catalysts, (ii) adoption and adsorption of various ³¹P probe molecules, (iii) considerations for one- and two-dimensional (1D and 2D, respectively) NMR acquisition, (iv) relevant data analysis and spectral assignment, and (v) methodology for NMR mapping with the assistance of theoretical calculations. Users familiar with SSNMR experiments can complete ³¹P-¹H heteronuclear correlation (HETCOR), ³¹P-³¹P proton-driven spin diffusion (PDSD), and double-quantum (DQ) homonuclear correlation with this protocol within 2-3 d, depending on the complexity and the accessible acid sites of the solid acid samples.

Evolution of a Metal-Organic Framework into a Brønsted Acid Catalyst for Glycerol Dehydration to Acrolein

Metal-organic frameworks (MOFs) as solid acid catalysts provide active sites with definite structures. Here, Zr₆ -based MOF-808 and its derivatives were studied as catalysts for glycerol dehydration, the products of which (acrolein vs. acetol) are very sensitive to the nature of the catalytic acid sites. Evolving MOF-808 into MOF-808-S with a 120 % increase in the number of Brønsted OH^- /H₂ O coordinated to Zr^IV and a vanished Lewis acidity by steam treatment, the post-synthetically modified catalyst presented 100 % conversion of glycerol, 91 % selectivity to acrolein, and 0 % selectivity to acetol within the active window. Real-time analysis of the product composition indicated the in situ MOF structural evolution. Overall, the specific MOF-substrate interaction characterized by the probe reaction provides more understandings on the structural evolution of the MOFs and their impact on the performance as solid acid catalysts.

Catalytic nanosponges of acidic aluminosilicates for plastic degradation and CO2 to fuel conversion

The synthesis of solid acids with strong zeolite-like acidity and textural properties like amorphous aluminosilicates (ASAs) is still a challenge. In this work, we report the synthesis of amorphous "acidic aluminosilicates (AAS)", which possesses Brønsted acidic sites like in zeolites and textural properties like ASAs. AAS catalyzes different reactions (styrene oxide ring-opening, vesidryl synthesis, Friedel-Crafts alkylation, jasminaldehyde synthesis, m-xylene isomerization, and cumene cracking) with better performance than state-of-the-art zeolites and amorphous aluminosilicates. Notably, AAS efficiently converts a range of waste plastics to hydrocarbons at significantly lower temperatures. A Cu-Zn-Al/AAS hybrid shows excellent performance for CO₂ to fuel conversion with 79% selectivity for dimethyl ether. Conventional and DNP-enhanced solid-state NMR provides a molecular-level understanding of the distinctive Brønsted acidic sites of these materials. Due to their unique combination of strong acidity and accessibility, AAS will be a potential alternative to zeolites.

A Bottom-Up Strategy for the Synthesis of Highly Siliceous Faujasite-Type Zeolite

High-silica zeolite Y is a desired catalytic material for oil refining and the petrochemical industry. However, its direct synthesis remains a symbolic challenge in the field of zeolite synthesis, with a limited improvement of the framework SiO₂ /Al₂ O₃ ratio (SAR) from ≈5 to 9 over the past 60 years. Here, the synthesis of highly siliceous zeolite Y with tunable SAR up to 15.6 through a cooperative strategy is reported, which involves the use of FAU nuclei, a bulky organic structure-directing agent (OSDA), and a gel system with low alkalinity (named NOA-co strategy). A series of quaternary alkylammonium ions is discovered as effective OSDAs based on the NOA-co strategy, and the relevant crystallization mechanism is elucidated. Moreover, the high-silica products are demonstrated to have greatly improved (hydro)thermal stability, high concentration of strong acid sites, and uniform acid distribution, which lead to superior catalytic performance in the cracking of bulky hydrocarbons. It is anticipated that this synthetic strategy will benefit the synthesis and development of zeolitic catalysts in a wide range of reaction processes.

Acid Properties of Hierarchical Zeolites Y

The article reviews different strategies towards obtaining mesoporous zeolites Y: desilication; surfactant templating and assembly of zeolite crystals. The impact of those methods on physicochemical properties is covered, with a special focus on the acidity of the samples measured with infrared (IR) spectroscopy. The methods of characterization of acidity are presented. Quaternary ammonium cations used for desilication lead to obtaining crystalline; mesoporous and highly acidic zeolites. Si-OH-Al groups of extremely high acidity can be produced by calcination in a humid atmosphere. When the conditions are optimized, post-synthetic surfactant templating allows crystalline mesoporous zeolite to be obtained with no loss of material. All mesoporous zeolites Y proved to be active catalysts in liquid phase isomerization, catalytic cracking, and other reactions.

Acidity enhancement through synergy of penta- and tetra-coordinated aluminum species in amorphous silica networks

Amorphous silica-aluminas (ASAs) are widely used in acid-catalyzed C-H activation reactions and biomass conversions in large scale, which can be promoted by increasing the strength of surface Brønsted acid sites (BAS). Here, we demonstrate the first observation on a synergistic effect caused by two neighboring Al centers interacting with the same silanol group in flame-made ASAs with high Al content. The two close Al centers decrease the electron density on the silanol oxygen and thereby enhance its acidity, which is comparable to that of dealuminated zeolites, while ASAs with small or moderate Al contents provide mainly moderate acidity, much lower than that of zeolites. The ASAs with enhanced acidity exhibit outstanding performances in C-H bond activation of benzene and glucose dehydration to 5-hydroxymethylfurfural, simultaneously with an excellent calcination stability and resistance to leaching, and they offer an interesting potential for a wide range of acid and multifunctional catalysis.

Hybrid catalysts based on N-heterocyclic carbene anchored on hierarchical zeolites

Hybrid materials have been synthesized by anchoring a N-heterocyclic carbene (NHC) precursor on different inorganic zeolitic supports with hierarchical porosity, in particular hierarchical HZSM-5 and SAPO-5. Hierarchical porous inorganic supports have been obtained both by top-down and bottom-up approaches and the role of hierarchical porosity has been evaluated. A detailed physico-chemical characterization has been performed on the organic-inorganic hybrids using a multi-technique approach (XRD, volumetric and thermogravimetric analysis, ssNMR and FTIR) in order to establish a structure-property relationship. The hybrids were tested in the benzoin condensation reaction of furfural, a base catalyzed reaction.

A Supramolecular View on the Cooperative Role of Brønsted and Lewis Acid Sites in Zeolites for Methanol Conversion

A systematic molecular level and spectroscopic investigation is presented to show the cooperative role of Brønsted acid and Lewis acid sites in zeolites for the conversion of methanol. Extra-framework alkaline-earth metal containing species and aluminum species decrease the number of Brønsted acid sites, as protonated metal clusters are formed. A combined experimental and theoretical effort shows that postsynthetically modified ZSM-5 zeolites, by incorporation of extra-framework alkaline-earth metals or by demetalation with dealuminating agents, contain both mononuclear [MOH]⁺ and double protonated binuclear metal clusters [M(μ-OH)₂M]²⁺ (M = Mg, Ca, Sr, Ba, and HOAl). The metal in the extra-framework clusters has a Lewis acid character, which is confirmed experimentally and theoretically by IR spectra of adsorbed pyridine. The strength of the Lewis acid sites (Mg > Ca > Sr > Ba) was characterized by a blue shift of characteristic IR peaks, thus offering a tool to sample Lewis acidity experimentally. The incorporation of extra-framework Lewis acid sites has a substantial influence on the reactivity of propene and benzene methylations. Alkaline-earth Lewis acid sites yield increased benzene methylation barriers and destabilization of typical aromatic intermediates, whereas propene methylation routes are less affected. The effect on the catalytic function is especially induced by the double protonated binuclear species. Overall, the extra-framework metal clusters have a dual effect on the catalytic function. By reducing the number of Brønsted acid sites and suppressing typical catalytic reactions in which aromatics are involved, an optimal propene selectivity and increased lifetime for methanol conversion over zeolites is obtained. The combined experimental and theoretical approach gives a unique insight into the nature of the supramolecular zeolite catalyst for methanol conversion which can be meticulously tuned by subtle interplay of Brønsted and Lewis acid sites.