D-penicillamine-templated copper nanoparticles via ascorbic acid reduction as a mercury ion sensor

Recent Progress in Nanoparticles Based Sensors for the Detection of Mercury (II) Ions in Environmental and Biological Samples

To maintain a green and sustainable environment for human beings, rapid detection of potentially toxic heavy metals like mercury (Hg(II)) has attracted great attention. Recently, sensors have been designed which can selectively detect Hg(II) over other common available cations and give a naked eye or fluorometric response. In the last two decades, the trend is shifting from bulky organic chemosensors toward nanoparticles due to their rapid response, low cost, eco-friendly and easy synthesis. In this review, promising nanoparticles-based sensors for Hg(II) detection are discussed. The nano-sensors are functionalized with nucleotide or other suitable materials which coordinate with Hg(II) ions and give clear color or fluorescence change. The operational mechanisms are discussed focusing on its four basic types. The nanoparticles-based sensors are even able to detect Hg in three different oxidation states (Hg(II), Hg(I) and Hg(0)). Recently, the trend has been shifted from ordinary nanoparticles to magnetic nanoparticles to simultaneously detect and remove Hg(II) ions from environmental samples. Furthermore, the nano-sensors for Hg(II) are compared with each other and with the reported organic chemosensors.

Overall perspective of electrospun semiconductor metal oxides as high-performance gas sensor materials for NOx detection

Gas sensors based on nanostructured semiconductor metal oxide (SMO) materials have been extensively investigated as key components due to their advantages over other materials, namely, high sensitivity, stability, affordability, rapid response and simplicity. However, the difficulty of working at high temperatures, response in lower concentration and their selectivity are huge challenges of SMO materials for detecting gases. Therefore, researchers have not stopped their quest to develop new gas sensors based on SMOs with higher performance. This paper begins by highlighting the importance of nitrogen monoxide (NO) and nitrogen dioxide (NO2) detection for human health and addresses the challenges associated with existing methods in effectively detecting them. Subsequently, the mechanism of SMO gas sensors, analysis of their structure and fabrication techniques focusing on electrospinning technique, as well as their advantages, difficulties, and structural design challenges are discussed. Research on enhancing the sensing performance through tuning the fabrication parameters are summarized as well. Finally, the problems and potential of SMO based gas sensors to detect NOx are revealed, and the future possibilities are stated.

Multicomponent Reaction Based Tolyl-substituted and Pyrene-Pyridine Conjugated Isomeric Ratiometric Fluorescent Probes: A Comparative Investigation of Photophysical and Hg(II)-Sensing Behaviors

Herein, the synthesis of pyrene conjugated 2,6-di-ortho-tolylpyridine and 2,6-di-para-tolylpyridine structural isomers were achieved efficiently through multicomponent Chichibabin pyridine synthesis reaction. The DFT, TD-DFT and experimental investigations were carried out to investigate the photophysical behaviors of the synthesized novel pyrene-pyridine based isomeric probes. Our studies revealed that, due to the continuous conjugation of the pyrene, pyridine and tolyl moieties, the dihedral angles of the trisubstituents on the central pyridine moiety significantly influences the photophysical properties of the synthesized novel pyrene based fluorescent probes. Further, we have comparatively investigated the sensing behaviors of the synthesized tolyl-substituted isomeric ratiometric fluorescent probes with metal ions, our studies reveals that both the ortho and para tolyl ratiometric fluorescent probes have distinct photoemissive properties in selectively sensing of Hg2+ ions. Our studies indicates that, the para-tolyl substituted isomer displays more red-shift in wavelength of emission band compared to its ortho isomer analogue during ratiometric fluorescent specific detection of Hg2+ ions.

Simultaneous fluorescence sensing of vitamin B2 and sulfur ions based on fluorescent copper nanoparticles

In this study, the F-CuNPs were synthesized by a modified liquid-phase chemical reduction method. Throughout the preparation process, anhydrous copper sulfate was used as the copper source, and ascorbic acid in the NaOH solution served as the reducing and protective agent. Förster resonance energy transfer (FRET) may exist between F-CuNPs and vitamin B2 due to the large spectral overlap between the fluorescence emission spectra of F-CuNPs and the UV-vis absorption spectra of vitamin B2. Therefore, the detection of vitamin B2 was designed based on a FRET system between F-CuNPs and vitamin B2. With S^2- into the F-CuNPs&VB2 system, the fluorescence intensity of vitamin B2 was quenched, while the fluorescence intensity of F-CuNPs was almost unchanged. There may be a specific reaction between S^2- and vitamin B2. Therefore, the research system can be further used to detect S^2- based on ratiometric fluorescent probe. The research findings show that the linear range of vitamin B2 was 0.51 nM-34.64 nM with a detection limit of 0.25 nM (S/N = 3), the linear range of S^2- was 0.64 μM-60.00 μM with a detection limit of 0.32 μM (S/N = 3). Furthermore, the simultaneous fluorescent sensing system has high sensitivity and selectivity. Therefore, this system was designed and successfully used to detect the content of vitamin B2 and S^2- in actual samples to find a new effective method to detect analytes.

Identification of heavy metal ions from aqueous environment through gold, Silver and Copper Nanoparticles: An excellent colorimetric approach

Heavy metal pollution has become a severe threat to human health and the environment for many years. Their extensive release can severely damage the environment and promote the generation of many harmful diseases of public health concerns. These toxic heavy metals can cause many health problems such as brain damage, kidney failure, immune system disorder, muscle weakness, paralysis of the limbs, cardio complaint, nervous system. For many years, researchers focus on developing specific reliable analytical methods for the determination of heavy metal ions and preventing their acute toxicity to a significant extent. The modern researchers intended to utilize efficient and discerning materials, e.g. nanomaterials, especially the metal nanoparticles to detect heavy metal ions from different real sources rapidly. The metal nanoparticles have been broadly utilized as a sensing material for the colorimetric detection of toxic metal ions. The metal nanoparticles such as Gold (Au), Silver (Ag), and Copper (Cu) exhibited localized plasmon surface resonance (LPSR) properties which adds an outstanding contribution to the colorimetric sensing field. Though, the stability of metal nanoparticles was major issue to be exploited colorimetric sensing of heavy emtal ions, but from last decade different capping and stabilizing agents such as amino acids, vitmains, acids and ploymers were used to functionalize the metal surface of metal nanoparticles. These capping agents prevent the agglomeration of nanoparticles and make them more active for prolong period of time. This review covers a comprehensive work carried out for colorimetric detection of heavy metals based on metal nanoparticles from the year 2014 to onwards.

Copper nanoclusters with/without salicylaldehyde-modulation for multifunctional detection of mercury, cobalt, nitrite and cyanide ions in aqueous solution and bioimaging

The sensitive determination of multiple heavy metal ions and toxic anions is important in biological and environmental fields. Here we report a facile strategy to construct a multifunctional chemosensor for the detection of Hg²⁺, [Formula: see text]Co²⁺, and CN^- in aqueous solution based on the fluorescent copper nanoclusters (Cu NCs). It was interesting to find that salicylaldehyde (SA) could effectively modulate the fluorescence property and sensing behavior of Cu NCs. In the absence of SA, Cu NCs showed 'on-off' fluorescence responses at the addition of Hg²⁺ and [Formula: see text] under different quenching mechanisms. Upon the presence of SA, Cu NCs exhibited a strong intramolecular charge transfer emission at 500 nm, accompanied by the decrease of the initial fluorescence of Cu NCs at 430 nm. This fluorescence on-state of Cu NC-SA at 500 nm was found to be exclusively turned off by Co²⁺ and enhanced by CN^-. Spectroscopy results combined with thermodynamic analysis provided sufficient information to deduce the sensing mechanisms. Finally, the Cu NCs showed high biocompatibility and were able to be used for fluorescence bioimaging in living cells. This study provided a novel and simple strategy to construct the multifunctional chemosensors for bioanalytical applications.

Ligand-modulated aqueous synthesis of color-tunable copper nanoclusters for the photoluminescent assay of Hg(II)

Water-soluble Cu nanoclusters (NCs) with tunable emission were synthesized through an eco-friendly one-pot aqueous method. Blue-, green-, and red-emitting NCs with the emission peaks at 420 nm, 505 nm, and 630 nm were obtained by employing ethanediamine, cysteine, and glutathione as surface ligands, respectively. The ligand effects on the optical properties of Cu NCs were studied by the single variable method. It has been revealed by systematic characterizations that the dependence of emission color on the structures of ligands was mainly attributed to their different size-tuning effects. Glutathione has the strongest chelating ability and it can significantly reduce the monomer reactivity and thus decrease the supersaturation degree of the reaction, which is favorable for modulating Cu precursor to grow into larger NCs. In contrast, ethanediamine ligand resulted in smaller nanoclusters due to its weaker binding capability. Because of the strong emission and terrific fluorescent stability, Cu NCs capped with ethanediamine, possessing an emission peak at 420 nm when excited at a wavelength of 350 nm, were directly used for probing Hg(II) with satisfying selectivity, presenting a linear range of 0.1-5.0 mM and a detection limit of 33 μM. The sensor showed good performance in real sample analysis with recoveries ranging from 99% to 103%, and comparable accuracy with atomic fluorescence spectroscopy, manifesting the reliability of the current strategy for sensing Hg(II). Graphical abstract Water-soluble copper nanoclusters with blue, green, and red emissions were synthesized by employing ethanediamine, cysteine, and glutathione as surface ligands respectively, and the blue-emitting nanoclusters with strong emission and terrific stability were directly used for selectively sensing Hg²⁺.

Ratiometric assay of mercury ion based on nitrogen-doped carbon dots with two different optical signals: second-order scattering and fluorescence

Ratiometric assays, which can effectively surmount external interference, have attracted extensive research interests. Herein, a novel ratiometric sensing platform for Hg²⁺ is designed based on nitrogen-doped carbon dots (N-CDs) with two different optical signals. Under a single excitation, N-CDs have two emission peaks around 668 nm and 412 nm, which are second-order scattering and fluorescence, respectively. Upon the addition of Hg²⁺, the weak scattering emission at 668 nm can be increased apparently, while the strong fluorescence intensity at 412 nm is weakened. Moreover, the ratio of scattering intensity to fluorescence intensity is linearly dependent on Hg²⁺ concentration (0.1-10 μM and 10-30 μM, respectively), and the detection limit is 66 nM. In addition, the ratiometric sensing mechanism is investigated in detail, which is due to the combined effect of aggregation-induced fluorescence quenching and scattering enhancement. Furthermore, the developed sensing approach holds a promising application for Hg²⁺ detection in actual samples. Graphical abstract.

Carbon dots-based fluorescent turn off/on sensor for highly selective and sensitive detection of Hg2+ and biothiols

In this work, sodium salicylate and ethylenediamine (EDA) are used as the precursors to synthesize green fluorescent carbon dots (CDs). The CDs have some attractive properties, including better oxidation resistance, good water solubility, and excellent stability in high ionic strength solutions in a pH range of 6.0-10.0. Compared to other metal ions, only Hg²⁺ can quench the fluorescence of CDs, and with the introduction of biothiols, the fluorescence of the CDs/Hg²⁺ system can be recovered. Therefore, a turn off/on fluorescent sensor is constructed using CDs as a fluorescent probe, and the sensor is applied to the detection of Hg²⁺ and biothiols (glutathione, homocysteine and cysteine). In addition, the fluorescent sensor exhibits excellent selectivity and sensitivity. The linear range of Hg²⁺ is 0.05-10 μM with the detection limit of 44 nM. Glutathione, homocysteine, and cysteine have a linear response in the range of 0.5-10 μM with the limit of detection of 80, 76, and 69 nM, respectively. Furthermore, the fluorescence method is successfully used to detect Hg²⁺ in actual water samples and biothiols in human plasma.

Electrospinning Nanoparticles-Based Materials Interfaces for Sensor Applications

Electrospinning is a facile technique to fabricate nanofibrous materials with adjustable structure, property, and functions. Electrospun materials have exhibited wide applications in the fields of materials science, biomedicine, tissue engineering, energy storage, environmental science, sensing, and others. In this review, we present recent advance in the fabrication of nanoparticles (NPs)-based materials interfaces through electrospinning technique and their applications for high-performance sensors. To achieve this aim, first the strategies for fabricating various materials interfaces through electrospinning NPs, such as metallic, oxide, alloy/metal oxide, and carbon NPs, are demonstrated and discussed, and then the sensor applications of the fabricated NPs-based materials interfaces in electrochemical, electric, fluorescent, colorimetric, surface-enhanced Raman scattering, photoelectric, and chemoresistance-based sensing and detection are presented and discussed in detail. We believe that this study will be helpful for readers to understand the fabrication of functional materials interfaces by electrospinning, and at the same time will promote the design and fabrication of electrospun nano/micro-devices for wider applications in bioanalysis and label-free sensors.

The functionalized ruthenium(II) polypyridine complexes for the highly selective sensing of mercury ions

A series of new ruthenium(II) polypyridine complexes appending with thioether groups were designed, synthesized and characterized. The sensing ability of the complexes toward mercury ions were studied by electronic absorption and emission spectra, and the reaction of the complexes with mercury ions were also confirmed by ESI mass spectroscopy and ¹HNMR spectroscopy. The thioether groups would react with mercury ion fast to form aldehyde group leading to the significant change in the spectra. The color of the complex changed from yellow to orange after addition of mercury ions, and the color of the emission changed from red orange to dark red with a large red shift (~80 nm). Importantly, these kinds of ruthenium(II) complexes show a unique recognition of mercury ions over other metal ions. The complexes with more thioether groups also showed a better sensitivity toward mercury ions, this is good strategy for the further design of the new phosphorescent probes for sensing of mercury ions.

AuCu bimetal nanoclusters as high-performance mimics for ultrasensitive recognition of biomolecules

Introducing novel mimic materials as alternatives for natural enzymes challenges the analysts. Study on the peroxidase-like materials is an active field in analytical research areas. Herein, Au/Cu bimetal nanoclusters (Au/Cu NCs) are introduced as highly efficient peroxidase mimics, which were investigated using fluorometric and colorimetric techniques. A comprehensive comparison between the catalytic activity of Au, Cu, and their bimetal NCs, with different ratios of Au/Cu was performed using some different peroxidase substrates (including 3,3′,5,5′-tetramethylbenzidine (TMB), o-phenylenediamine dihydrochloride (OPD), and terephthalic acid (TA)). Additionally, different capping agents were applied for the synthesis of NCs, and it was found that penicillamine-capped NCs with 50% Cu have higher activity than other synthesized NCs. Analytical application of the novel mimic for H2O2 detection caused a linear calibration in a wide linear range of 0.001–3 μmol/L, and a great detection limit (3S) of 0.18 nmol/L, using a sensitive fluorescence system. The developed system was also sensitive for recognizing glucose and cholesterol in blood samples, after their enzymatic oxidation and production of H2O2. Detection limits of 55 and 15 nmol/L were obtained for glucose and cholesterol, respectively. The presented method also showed good reliability, which was validated by certified reference materials.

Aquamarine blue emitting silver nanoparticles as fluorescent sensor for melamine detection

Designing an exceptional probe to detect minute quantities of melamine is of huge importance for the safety and health of the human race. In this study, an aquamarine blue and rapid fluorescent sensor was devised by chemical reduction synthesis method for highly selective and sensitive detection of melamine in milk using polyethyleneimine protected silver nanoparticles (PEI-AgNPs). The optical properties of PEI-AgNPs were studied as a function of reactive material concentration, incubation time, temperature and pH. The formation of PEI-AgNPs was verified by using transmission electron microscopy (TEM) and found that the PEI-AgNPs were spherical in shape with an average diameter of 15 nm. The prepared PEI-AgNPs were aquamarine blue luminescent under UV light and show a maximum emission at 470 nm, when excited at 348 nm. The fluorescence of the PEI-AgNPs can be effectively quenched by the addition of melamine due to its ability to interact with citric acid (CA) through hydrogen bonding and form silver-melamine complexes with Ag⁺ via coordination bonds, while the addition of other nitro compounds induced feeble quenching of PEI-AgNPs, suggesting the high selectivity of PEI-AgNPs. The present sensor system exhibits a good linear response to melamine ranging from 0.16 to 56 μM, and the limit of detection was found to be 132 nM (Sb/K = 3). Significantly, the fluorescence sensor exhibited good selectivity and acted as a potential probe for detection of melamine in milk samples.

Bimetallic AuCu nanoclusters-based florescent chemosensor for sensitive detection of Fe3+ in environmental and biological systems

Assays of ferric ion (Fe³⁺) with high sensitivity and selectivity have been required to evaluate its amount in environmental and biological systems. Herein, a novel fluorometric penicillamine-capped bimetallic gold-copper nanoclusters (PA-AuCu bi-MNCs) sensor was constructed for facile, environmentally friendly and quantitative detection of Fe³⁺ through inner filter effect (IFE) mechanism. One-step green synthetic approach was applied for the synthesis of AuCu bi-MNCs by using d-penicillamine (D-PA) as template and stabilizer. In the presence of Fe³⁺, the emission of the PA-AuCu bi-MNCs was hindered that caused selective quenching of the fluorescence intensity. The response to Fe³⁺ allows for two linear dynamic ranges of 5.0 × 10^-7 M-7.0 × 10^-6 M and 7.0 × 10^-6 M-1.0 × 10^-4 M with a detection limit of 0.1 μM, which is approximately 53 times lower than the maximum level (5.37 μM) of Fe³⁺ in drinking water that had been reported by the World Health Organization. The independency of the system from most of the interferences is the important feature of this work. Beside the appropriate selectivity of the proposed method, it shows a considerable operation in various environmental samples including rain water, three types of river water and also in human blood serum as a biological matrix.

Fluorescence-tunable copper nanoclusters and their application in hexavalent chromium sensing

Generally, metal nanoclusters are synthesized using only a single ligand. Thus, the properties and applications of these nanomaterials are limited by the nature of the ligand used. In this study, we have developed a new synthetic strategy to prepare bi-ligand copper nanoclusters (Cu NCs). These bi-ligand Cu NCs are synthesized from copper ions, thiosalicylic acid, and cysteamine by a simple one-pot method, and they exhibit high quantum yields (>18.9%) and good photostability. Most interestingly, the fluorescence intensities and surface properties of the Cu NCs can be tailored by changing the ratio of the two ligands. Consequently, the bi-ligand Cu NCs show great promise as fluorescent probes. Accordingly, the Cu NCs were applied to the inner-filter-effect-based detection of hexavalent chromium in water. A wide linear range of 0.1–1000 μM and a low detection limit (signal-to-noise ratio = 3) of 0.03 μM was obtained. The recoveries for the real sample analysis were between 98.3 and 105.0% and the relative standard deviations were below 4.54%, demonstrating the repeatability and practical utility of this assay.

Generally, metal nanoclusters are synthesized using only a single ligand.

Ultrasensitive electrochemical detection of Hg2+ based on an Hg2+-triggered exonuclease III-assisted target recycling strategy

In the present work, a simple, rapid, isothermal, and ultrasensitive homogeneous electrochemical biosensing platform for target Hg2+ detection was developed on the basis of an exonuclease III (Exo III)-aided target recycling amplification strategy. In the assay, a label-free hairpin probe (HP1) was ingeniously designed, containing a protruding DNA fragment at the 3'-termini as the recognition unit for target Hg2+. Also, the DNA fragment in the loop region and 5'-termini (Helper) could be used when a secondary target analog is introduced, but it is caged in the stem region of HP1 when without such a target. The produced secondary target Helper opened the methylene blue (MB)-labeled hairpin probe (HP2) and triggered the Exo III cleavage process, accompanied with the secondary target recycling. This accordingly resulted in the autonomous reduction of the electroactive material MB on the electrode, inducing a distinct decrease in the electrochemical signal. The current developed homogeneous strategy provides a means for the ultrasensitive electrochemical detection of Hg2+ down to the 227 pM level, with high selectivity. It could be further used as a general autocatalytic and homogeneous strategy toward the detection of a wide spectrum of analytes and may be associated with more analytical techniques.

Sensitive Hg2+ Ion Detection Using Metal Enhanced Fluorescence of Novel Polyvinyl Pyrrolidone (PVP)-Templated Gold Nanoparticles

In this study, we report a straightforward strategy for Hg²⁺ ion detection. Fluorescent Au nanoparticles (NPs) were one-pot synthesized using a polymer (polyvinyl pyrrolidone [PVP]) as both capping and fluorescence agent. The as-synthesized PVP-Au NPs showed a remarkably rapid response selectively for Hg²⁺ ions compared to 14 other metal ions. The detection limit of Hg²⁺ was estimated at 100 nM. We discuss the emission and quenching mechanism of the PVP-Au NPs, the former being attributed to metal enhanced fluorescence and the latter being related to static quenching by Hg²⁺. The fluorescence of PVP-Au NPs offers an efficient and reliable strategy for Hg²⁺ ions detection. They therefore have a great potential for applications in health and environmental monitoring.

Synthesis, optical properties and applications of light-emitting copper nanoclusters

Metal nanoclusters (NCs) containing a few to a few hundreds of atoms bridge the gap between nanoparticles and molecular compounds. The last decade evidenced impressive developments of noble metal NCs such as Au and Ag. Copper is an earth abundant, inexpensive metal from the same group of the periodic table, which is increasingly coming into focus for NC research. This review specifically addresses wet chemical synthesis methods, optical properties and some emerging applications of Cu NCs. As surface protecting templates/ligands play an important role in the stability and properties of Cu NCs, we classified the synthetic methods by the nature of the capping agents. The optical properties of Cu NCs are discussed from the point of view of the effects of the metal core, surface ligands and environment (solvents and aggregation) on the emission of the clusters. Applications of luminescent Cu NCs in biological imaging and light emitting devices are considered.

Fabrication of valine-functionalized graphene quantum dots and its use as a novel optical probe for sensitive and selective detection of Hg2

The functionalization of graphene quantum dots has become a powerful method to modulate its chemical, electronic and optical properties for various applications. In the study, we reported a facile synthesis of valine-functionalized graphene quantum dots (Val-GQDs) and its use as a novel fluorescent probe for optical detection of Hg²⁺. Herein, Val-GQDs was synthesized by the thermal pyrolysis of citric acid and valine. The resulting Val-GQDs has an average size of 3nm and the edge of graphene sheets contains the rich of hydrophilic groups, leading to a high water-solubility. Compared to the GQDs prepared by thermal pyrolysis of citric acid, Val-GQDs exhibits a stronger fluorescence (>10-fold) and better photostability (>4-fold). Interestingly, the existence of valine moieties in the Val-GQDs results in a more sensitive fluorescent response to Hg²⁺. The fluorescent signal will linearly decrease with the increase of Hg²⁺ concentration in the range from 0.8nM to 1μM with the correlation coefficient of 0.992. The detection limit is 0.4nM (S/N=3), which the sensitivity is >14-fold that of GQDs. The analytical method provides the prominent advantage of sensitivity, selectivity and stability. It has been successfully applied in the optical detection of Hg²⁺ in real water samples. The study also provides a promising approach for the design and synthesis of functionalized GQDs to meet the needs of further applications in sensing and catalysis.

Metal-organic frameworks as biosensors for luminescence-based detection and imaging

Metal-organic frameworks (MOFs), formed by the self-assembly of metal centres or clusters and organic linkers, possess many key structural and chemical features that have enabled them to be used in sensing platforms for a variety of environmentally, chemically and biomedically relevant compounds. In particular, their high porosity, large surface area, tuneable chemical composition, high degree of crystallinity, and potential for post-synthetic modification for molecular recognition make MOFs promising candidates for biosensing applications. In this review, we separate our discussion of MOF biosensors into two categories: quantitative sensing, focusing specifically on luminescence-based sensors for the direct measurement of a specific analyte, and qualitative sensing, where we describe MOFs used for fluorescence microscopy and as magnetic resonance imaging contrast agents. We highlight several key publications in each of these areas, concluding that MOFs present an exciting, versatile new platform for biosensing applications and imaging, and we expect to see their usage grow as the field progresses.