Ultrasonic assisted dispersive liquid-liquid microextraction method based on deep eutectic solvent for speciation, preconcentration and determination of selenium species (IV) and (VI) in water and food samples

Highly selective localized surface plasmon resonance sensor for selenium diagnosis in selenium-rich soybeans

It is a challenge to determine selenium in acid aqueous for environmental monitoring and selenium-rich agricultural diagnosis. Herein, we developed a novel localized surface plasmon resonance (LSPR) sensor to detect Se(IV) ions based on the extraordinary laterals etching of gold nanorods (AuNRs). The etching started from the laterals in the low amount of Se(IV) ions, and accompanied by an apparent red shift of the longitudinal plasmon band (LPB), and then transformed to the tips etching with the upward of Se(IV) ions, the LPB band immediately shifted to the shorter wavelength. The red shift change (Δλ) of LPB band was utilized to quantitative analysis instead of blue shift or absorbance intensity, which gave a high selectivity for the proposed sensor. More importantly, this sensor could be performed in 0.1 mol/L of HCl solution, which achieved the seamlessly jointing with the pretreatment of complex samples, without time-consuming pH adjustment.Successful selenium detection was demonstrated in complex soybean samples that collected from the maturity after spraying organic chelated selenium at full flower period. The sensor provided a promising way to monitor and diagnose selenium in complex environmental samples and selenium-rich crops.

Deep Eutectic Solvents for Extraction and Preconcentration of Organic and Inorganic Species in Water and Food Samples: A Review

Deep eutectic solvents (DESs) have been developed as green solvents and these are capable as alternatives to conventional solvents used for the extraction of organic and inorganic species from food and water samples. The continuous generation of contaminated waste and increasing concern for the human health and environment have compelled the scientific community to investigate more ecological schemes. In this concern, the use of DESs have developed in one of the chief approach in the field of chemistry. These solvents have appeared as a capable substitute to conventional hazardous solvents and ionic liquids. The DESs has distinctive properties, easy preparation and components availability. It is not only used in scienctific fields but also used in quotidian life. There are many advantages of DESs in analytical chemistry, they are largely used for extraction and determination of inorganic and organic compounds from different samples. In previous a few years, several advanced researches have been focused on the separation and preconcentration of low level of pollutants using DESs as the extractants. This review summarizes the use of DESs in the separation and preconcentration of organic and inorganic species from water and food samples using various microextraction processes.

Aptamer and Electrochemical Aptasensor towards Selenate Ions (SeO42-)

Selenium is an essential inorganic compound in human and animal nutrition, involved in the proper functioning of the body. As a micronutrient, it actively contributes to the regulation of various metabolic activities, i.e., thyroid hormone, and protection against oxidative stress. However, Se exhibits a narrow concentration window between having a positive effect and exerting a toxic effect. In higher doses, it negatively affects living organisms and causes DNA damage through the formation of free radicals. Increased reactivity of Se anions can also disrupt the integrity and function of DNA-repairing proteins. As the permissible concentration of Se in drinking water is 10 µg/L, it is vital to develop sensitive and robust methods of Se detection in aqueous samples. In this study, for the first time, we proposed a selective aptamer for selenate ion detection, chosen following the SELEX process, and its application in the construction of an electrochemical aptasensor towards SeO42- ions. Measurement conditions such as the used redox marker and pH value of the measurement solution were chosen. The proposed aptasensor is characterized by good selectivity and an LOD of 1 nM. Conditions for biosensor regeneration and storage were also investigated in this research.

Ultrasensitive determination of selenium in food samples and its speciation in water and beverages using thiosemicarbazide-incorporated graphene and total-reflection X-ray fluorescence spectrometry

The paper presents a new analytical procedure for the determination and speciation of trace and ultratrace selenium in water, beverages, seafood, milk, and vegetables. The developed method is based on the dispersive micro-solid phase extraction with the use of new thiosemicarbazide-incorporated graphene as a solid sorbent, in combination of the total-reflection X-ray fluorescence spectrometry (TXRF). As a result, we have created an auspicious analytical tool for fast and sensitive analysis of samples with a complex matrix. Regardless of the specimen type, the method is characterized by a very low detection limit of 1.7 pg mL-1 and high precision. The developed strategy allowed us to solve common problems associated with selenium loss during the sample preparation for the TXRF measurement and also improve its performance toward the analysis of beverages and high saline/solid samples, which may even be impossible to perform using standard sample preparation procedures for a TXRF measurement.

Terpenes based hydrophobic deep eutectic solvents for dispersive liquid-liquid microextraction of aliphatic aldehydes in drinking water and alcoholic beverages

Aliphatic aldehydes are a class of organic compounds containing aldehyde groups, which are widespread, and closely related to people's daily life and health. In this work, a series of terpenes based hydrophobic deep eutectic solvents were designed and synthesized using hexafluoroisopropanol as hydrogen bond donor and menthol/thymol as hydrogen bond acceptor. Then they are used as extraction solvent in dispersive liquid-liquid microextraction for extracting and determining seven aliphatic aldehydes from drinking water and alcoholic beverage combined with high performance liquid chromatography-ultraviolet. Due to the fact that these hydrophobic deep eutectic solvents are liquid at the room temperature, a density greater than that of water, a lower viscosity (≤26.10 mPa s, 25 °C), after extraction and centrifugation, the microvolume DES-rich phase in the bottom is convenient for collection and direct analysis without further dissolution or dilution with organic solvents. Some factors affecting the extraction recovery were optimized by one-variable-at-a-time and response surface methodology. Under the optimal conditions, the enrichment factors for the seven aliphatic aldehydes were 48-56. The method had good performance: linear ranges of 1.0-200, 0.5-200, 0.2-200, 0.4-400, 1.0-400, 0.4-400 and 0.4-400 μg L-1 for seven aliphatic aldehydes (r2 ≥ 0.9949), limits of detection of 0.1-0.5 μg L-1, intra-day and inter-day precisions <4.9%. The recoveries of seven aliphatic aldehydes ranged from 76.0 to 119.0%. The proposed dispersive liquid-liquid microextraction method is simple, rapid, highly efficient, and green, which effectively reduces the amount of toxic chemical reagents used and their impact on the environment. Rapid and efficient detection of aliphatic aldehydes helps ensure a healthy diet and has great application prospects in food safety analysis.

A systematic review and meta-analysis of validated analytical techniques for the determination of total selenium in foods and beverages

The intricate balance between the beneficial and harmful effects of selenium (Se) intake means that its quantification in food needs to be done correctly. Therefore, in this review, we systematized 105 articles to identify the most studied methodologies, analytical techniques, and food matrices. Among the analytical techniques employed, inductively coupled plasma mass spectrometry (ICP-MS) (n = 29) emerged as the most commonly used method. The most prevalent hydrolysis methodology to digest Se in food matrices involved the use of nitric acid combined with ultrasound, which improved both the yield and digestion time. Optimal recovery values were achieved when total Se quantification accounted for the sum of Se(IV) and Se(VI) (94.4-99.4%) and for SeCys (88-96.5%). These findings are relevant for advancing methodological approaches, and their results emphasize the importance of developing alternative, faster, and lower-cost protocols for Se quantification in foods and beverages.

Evaluating the status quo of deep eutectic solvent in food chemistry. Potentials and limitations

Conventional organic solvents (e.g., methanol, ethanol, ethyl acetate) are widely used for extraction, reaction, and separation of valuable compounds. Although these solvents are effective, they have disadvantages, including flammability, toxicity, and persistence in the environment. Deep eutectic solvents (DESs) are valued for their biodegradability/low impact on the environment, low cost, and ease of manufacture. The objective of this review was to provide an overview of applications of DES in food chemistry, specifically in regard of extraction of polyphenols (e.g., anthocyanin, rutin, kaempferol, quercetin, resveratrol), protein, carbohydrates (e.g., chitin, pectins), lipids and lipid-soluble compounds (e.g., free fatty acids, astaxanthin, β-carotene, terpenoids), biosensor development, and use in food safety (pyrethroids, Sudan I, bisphenol A, Pb²⁺, Cd²⁺, etc.) over the past five years. A comprehensive analysis and discussion of DES types, preparation, structures, and influencing factors is provided. Furthermore, the potential and disadvantages of using DESs to extract biomolecules were assessed. We concluded that DES is a viable alternative for extracting polyphenols, carbohydrates, and lipids as well as use in food safety monitoring and biosensor development. However, more work is needed to address shortcomings, and determine whether using compounds extracted with DES can be consumed safely.

Chemical association of copper and selenium in coals of Sindh by time saving single step strategy and their impact on groundwater

The aim of the present study is to estimate the different chemical fractionations of copper (Cu) and selenium (Se) in coal samples of different coal mining areas. The Cu and Se bound to various chemical fractions of coal collected from two mining fields of Sindh, Pakistan, have been determined by BCR sequential extraction scheme (BCR-SES). The long duration of the BCR sequential scheme (51 h) was reduced by a time-saving shaking device (ultrasonic bath) termed as ultrasonic-assisted extraction (USE) depending on the same operating conditions and extracting solutions used for BCR sequential extraction scheme. The both trace elements were determined in aquifer water, sampled from different depth of both coal mining fields. In addition, the groundwater of dug well in the vicinity of coal mining areas were also analyzed for Cu and Se using reported extraction methodologies. The partitioning of Cu and Se bound with different chemical fractions of coal was successfully made by proposed USE, within 2 h as compared to long duration of BCR-SES (51 h). The Cu and Se concentrations in acid-soluble fractions of coal samples were > 10%, enhanced by USE extraction procedure than those values gained via BCR-SES (p < 0.01). About 67 to 69% of Cu were found in the first three fractions, whereas their remaining amount corresponding to 31 to 33%, respectively bound with crystalline/residual fraction, while up to 66.1 to 71.1% of total Se contents extracted in three extractable phases, followed up to 28.9 to 33.8% of it was bound with residual phase. The concentrations of Cu and Se in groundwater of different aquifers were found in decreasing order as AQ1 > AQII > AQIII; the same trend was observed for two aquifers of Lakhra coal mining, whereas the groundwater samples have two to three folds higher levels of Se than WHO limit. The Cu levels in water samples were significantly lower than the recommended limit of WHO for drinking water (p < 0.01).

Vortex-assisted supramolecular solvent dispersive liquid–liquid microextraction of ketoprofen and naproxen from environmental water before chromatographic analysis: response surface methodology optimisation

A microextraction procedure that is rapid and simple to extract and preconcentrate ketoprofen and naproxen is proposed. An environmentally friendly supramolecular solvent was applied as an extraction solvent and proved to be efficient in the extraction of ketoprofen and naproxen from environmental water. The design of experiment approach was used to screen, optimize significant parameters, and determine optimum experimental conditions. Under optimized experimental conditions, the vortex-assisted supramolecular solvent dispersive liquid–liquid microextraction provided a good linearity (0.57–700 µg L−1), low limits of detection (0.17–0.24 µg L−1) and extraction reproducibility below 9%. The high percentage relative recoveries (93.6–101.4%) indicated that the method is not affected by matrix. The practical applicability of the method was assessed by analysing ketoprofen and naproxen in river water and effluent wastewater samples. Both analytes were found in effluent wastewater.

A critical review of selected preconcentration techniques used for selenium determination in analytical samples

Selenium (Se) is considered to be an essential trace element needed for all living organisms. The importance, deficiency, and toxic effects of Se mainly depend on its quantity and chemical nature. It has been observed that the inorganic versions of Se are more hazardous than the organic versions. This review is mainly focused on the application of different extraction methods used for Se extraction and determination such as microextraction, solid-phase extraction (SPE), and their modified modes in the last 12 years. The use of different dispersive medium (magnetic field, ultrasonic radiation, and vortex agitator) to enhance Se separation is also part of this review. The usage of environmentally friendly solvents such as supramolecular solvents, hydrophobic deep eutectic solvents (DESs), and ionic liquids (ILs) are also the focus of attention in this review. This review is also emphasized the application of advanced microextraction methods, particularly liquid-phase microextraction (LPME). The most recent advances in LPME extraction techniques for Se in various environmental samples, as well as their prospects, are reviewed. Additionally, a summary of cheap, simple, and accurate techniques that have not yet been used to determine small amounts of Se has been provided.

Perspectives of Using DES-Based Systems for Solid–Liquid and Liquid–Liquid Extraction of Metals from E-Waste

In recent years, the linear economic model and global warming have shown that it is necessary to move toward a circular economic model. In this scenario, the recycling of waste electrical and electronic equipment (WEEE) with green processes is one of the pending tasks; thus, in the present review, advances in the solid–liquid and liquid–liquid extraction processes, processes among the most important for the recovery of metals from ores or WEEE, with green solvents such as deep eutectic solvents (DES) are presented and analyzed, identifying the present and future challenges. To date, most articles focused on one of the processes, be it solid–liquid or liquid–liquid extraction, while few reports included the entire hydrometallurgical process, which could be due to heterogeneity of the WEEE, a characteristic that influences determining the leaching kinetic and the leaching mechanisms. A deeper understanding of the phenomenon would help improve this process and the next stage of liquid–liquid extraction. This also leads to the fact that, at the liquid–liquid extraction stage, most articles considered synthetic pregnant leach solutions to evaluate each of the variables, whereas the stripping of the ions and the recycling of the DESs in continuous processes is a challenge that should be addressed in future work. From the analysis, for WEEE leaching, it was identified that acid DESs are those achieving the best extraction percentages in the leaching of copper, lithium, and cobalt, among others, where the most studied hydrogen bond acceptor (HBA) is choline chloride with an acid (e.g., citric or lactic acid) as the hydrogen bond donor (HBD). For the liquid–liquid extraction of ions is a greater variety of HBAs (e.g., lidocaine, trioctylphosphine oxide and triphenyl phosphate) and HBDs (e.g., decanoic acid, thenoyltrifluoroacetone, and benzoyltrifluoroacetone) used; however, studies on the extraction of cobalt, lithium, copper, and nickel stand out, where the pH and temperature parameters have great influence.

Fabrication of functional group-rich monoliths for magnetic field-assisted in-tube solid phase microextraction of inorganic selenium species in water samples followed by online chromatographic determination

Efficient separation and enrichment is a crucial step in the analysis of Se(IV) and Se(VI). In the present study, for the first time, online monolith-based magnetic field-assisted in-tube solid phase microextraction (MFA/IT-SPME) was applied to capture inorganic selenium species in water samples. To this aim, porous monoliths mixed with magnetic nanoparticles were synthesized in a silica capillary and employed as a microextraction column (MEC) for MFA/IT-SPME. After that, a magnetic coil utilized to induce variable magnetic fields in adsorption and desorption steps was entwined around the MEC. Se(IV) was coordinated with o-phenylenediamine to form a coordination compound that was infused onto the MEC to be captured. Results evidenced that application of magnetic field during the extraction procedure assisted the capture of the Se(IV)-OPA complex, with an enhancement in the extraction efficiency from 83% to 97%. Under the optimized conditions, MFA/IT-SPME was online combined with HPLC equipped with a diode array detector (DAD) to perform quantification of Se(IV) and Se(VI) in environmental water samples. Total inorganic Se was quantified after pre-reduction of Se(VI) to Se(IV) prior to applying the established approach, and a subtraction method was adopted to calculate the Se(VI) and Se(IV) contents. The limit of detection for Se(IV) was as low as 0.012 μg L^-1. The reliability of the suggested method was investigated by assaying Se(IV) and Se(VI) species in real-life water samples with satisfactory recoveries (81.1%-116%) and repeatability (RSDs below 9%).

Efficient entrapment of inorganic Se species in water and beer samples with functional groups-rich monolith-based adsorbent

An efficient multiple fibers solid phase microextraction method based on porous monolith was established for Se(IV) and Se(VI) analysis. Poly (4-vinylphenylboronic acid/styrene-co-ethylene dimethacrylate/divinylbenzene) monolith was fabricated and employed as the extraction phase for efficient entrapment of Se(IV) complexed with o-phenylenediamine, followed by elution with a methanol/FA (99/1.0, v/v) mixture and quantification by high performance liquid chromatography with diode array detector. The Se(VI) species was measured by the difference between total inorganic Se and Se(IV) after pre-reduction. Different characterization techniques were employed to inspect the structure and morphology of prepared adsorbent. A series of key extraction factors were optimized so as to achieve the expected extraction performance. Under the optimized separation and capture parameters, the linear range and limit of detection for Se(IV) in water sample were 0.050-200 μg/L and 0.013 μg/L, respectively. For beer sample, the corresponding values were 0.010-300 μg/L and 0.032 μg/L. The developed microextraction approach was successfully utilized to detect trace Se(IV) and Se(VI) in environmental water and beer samples with satisfactory fortified recovery and repeatability. Results well reveal the attractive merits of the established method in the analysis of Se species, including simple preparation of adsorbent, convenient extraction procedure, good sensitivity, high cost-effectiveness and eco-friendliness. This article is protected by copyright. All rights reserved.

Speciation and determination of inorganic selenium species in certain fish and food samples by gold-coated W-coil atom trap hydride generation atomic absorption spectrometry

A very sensitive, selective, rapid and easy gas-phase preconcentration based method is presented for the determination and speciation of inorganic selenium in chicken meat, poultry eggs, mullet fish (Mugil Cephalus) and sea bass fish (Dicentrarchus Labrax) samples. Gold-coated W-coil atom trap was used to increase the sensitivity of conventional HG-AAS. LOD and LOQ values were calculated to be 0.021 μg/L and 0.070 μg/L, respectively. RSD% was found as 3.24. The sensitivity was increased 20 times more with the method used in the current study than the HG-AAS method. The interference effects of other metals on Se signal were significantly reduced by trap. SEM and EDX images of both bare and gold coated W-coil atom trap were screened. In order to check the accuracy of the method, "DOLT-5: Dogfish Liver" standard reference material was used and there was a good agreement between certified and found values at the 95% confidence level.

Trace Selenium Measurement in Water Using Laser-Induced Fluorescence Assisted by Laser Ablation

Selenium detection and removal from industrial and mining effluents have gained attention recently due to the negative effects of this trace element on aquatic life. However, the current methods for the detection of selenium in effluents are off-line by nature. In order to fill this gap, we investigated the use of laser ablation-assisted laser-induced fluorescence (LA-LIF) to measure trace amount of selenium in aqueous solutions. LA-LIF measurements are real time, label-free, standoff, and require no consumables as well as no sample preparation. They can provide a field-amenable, versatile tool for the measurement of selenium in the whole water treatment chain. We describe the system utilized, the temporal and fluence optimization studies, and the resulting calibration curve, which is linear over a wide dynamic range from parts-per-billion to tens of parts-per-million concentration levels. We also show that the achieved limit of detection of selenium can reach 32 µg/L using LA-LIF, without any kind of preconcentration or matrix transfer.

Elemental Speciation Analysis in Environmental Studies: Latest Trends and Ecological Impact

Speciation analysis is a key aspect of modern analytical chemistry, as the toxicity, environmental mobility, and bioavailability of elemental analytes are known to depend strongly on an element’s chemical species. Henceforth, great efforts have been made in recent years to develop methods that allow not only the determination of elements as a whole, but also each of its separate species. Environmental analytical chemistry has not ignored this trend, and this review aims to summarize the latest methods and techniques developed with this purpose. From the perspective of each relevant element and highlighting the importance of their speciation analysis, different sample treatment methods are introduced and described, with the spotlight on the use of modern nanomaterials and novel solvents in solid phase and liquid-liquid microextractions. In addition, an in-depth discussion of instrumental techniques aimed both at the separation and quantification of metal and metalloid species is presented, ranging from chromatographic separations to electro-chemical speciation analysis. Special emphasis is made throughout this work on the greenness of these developments, considering their alignment with the precepts of the Green Chemistry concept and critically reviewing their environmental impact.

Deep Eutectic Solvents Application in Food Analysis

Current trends in Analytical Chemistry are focused on the development of more sustainable and environmentally friendly procedures. However, and despite technological advances at the instrumental level having played a very important role in the greenness of the new methods, there is still work to be done regarding the sample preparation stage. In this sense, the implementation of new materials and solvents has been a great step towards the development of "greener" analytical methodologies. In particular, the application of deep eutectic solvents (DESs) has aroused great interest in recent years in this regard, as a consequence of their excellent physicochemical properties, general low toxicity, and high biodegradability if they are compared with classical organic solvents. Furthermore, the inclusion of DESs based on natural products (natural DESs, NADESs) has led to a notable increase in the popularity of this new generation of solvents in extraction techniques. This review article focuses on providing an overview of the applications and limitations of DESs in solvent-based extraction techniques for food analysis, paying especial attention to their hydrophobic or hydrophilic nature, which is one of the main factors affecting the extraction procedure, becoming even more important when such complex matrices are studied.

Preparation of a novel environmentally friendly hydrophobic deep eutectic solvent ChCl-THY and its application in removal of hexavalent chromium from aqueous solution

A liquid-liquid extraction methodology was developed for the removal of Cr(VI) from contaminated water using a novel green hydrophobic deep eutectic solvent (DES) as an efficient sole extracting agent. The hydrophobic DES was obtained by mixing choline chloride and thymol in 1:4 molar ratio at 70°C for 10 min and was denoted as ChCl-THY(1:4). The ChCl-THY(1:4) works efficiently for removal of high (20 mg/L) and low (500 µg/L) concentration of Cr(VI) from artificially contaminated natural water with >95% extraction efficiency (E%) at optimized reaction conditions (pH 2-6, 40°C). The DES was characterized by ¹ H NMR and FTIR spectroscopy, and the data suggest that interaction occurs between Cl^- ion of choline chloride and H atoms of thymol molecules. Physicochemical properties such as density, melting point, moisture, and solubility were studied and discussed. Herein, no sharp melting point was observed for ChCl-THY(1:4) in DSC curve. DES was regenerated using 0.1 M NaOH as stripping agent, and 50%-60% extraction efficiency could be attained in the next cycle. A plausible mechanism of interaction between Cr(VI) species and DES was also explored with the help of FTIR spectroscopy. PRACTITIONER POINTS: A novel hydrophobic DES (ChCl-THY) is prepared by mixing choline chloride and thymol at 1:4 molar ratio. ChCl-THY(1:4) is employed for the first time as sole extracting agent to remove the Cr(VI) from contaminated aqueous solution. >95% extraction efficiency was achieved by ChCl-THY(1:4) in natural water conditions at µg/L and mg/L level of contamination. Both the component used to prepare the DES are naturally abundant; hence, DES is not toxic for biota. The element present in natural water did not show any interference with extraction of Cr(VI).

Antioxidant stress and anticancer activity of peptide‑chelated selenium in vitro

The association between selenium and peptide in gastric cancer is an important research topic. The present study reported the facile synthesis of anticancer bioactive peptide (ACBP)-functionalized selenium (ACBP-S-Se) particles with enhanced anticancer activities and a detailed mechanistic evaluation of their ability to regulate oxidative stress in vitro. Structural and chemical characterizations were revealed by ultraviolet absorption, Fourier transform infrared, X-ray photoelectron, nuclear magnetic resonance carbon and hydrogen, energy dispersive X-ray spectroscopy and inductively coupled plasma mass spectrometry, as well as scanning electron microscopy. Sulfhydrylation modifications of ACBP were achieved with Sacetylmercaptosuccinic anhydride via chemical absorption. After the polypeptide was modified by sulfhydrylation, the ACBP chain was linked to sulfhydryl groups by amide bonds to form the ACBP-chelated selenium complex. Two gastric cancer cell lines (MKN-45 and MKN-74 cells) demonstrated high susceptibility to ACBP-S-Se particles and displayed significantly decreased proliferation ability following treatment. The results suggested that the bioactive peptide-chelated selenium particles effectively inhibited the proliferation of MKN-45 and MKN-74 cells in vitro. The genes encoding CDK inhibitor 1A (CDKN1A), cyclin B1, thioredoxin (TXN) and mitogen-activated protein kinase kinase kinase 5 are associated with regulation of oxidative stress, while CDKN1A and TXN protect cells by decreasing oxidative stress and promoting cell growth arrest. Therefore, ACBP-S-Se may be an ideal chemotherapeutic candidate for human cancer, especially gastric cancer.

Magnetic dispersive micro-solid phase extraction coupled with dispersive liquid-liquid microextraction followed by graphite furnace atomic absorption spectrometry for quantification of Se(IV) and Se(VI) in food samples

In this work, magnetic dispersive micro-solid phase extraction (MDMSPE) coupled with dispersive liquid-liquid microextraction (DLLME) was developed for Se(IV) and Se(VI) followed by graphite furnace atomic absorption spectrometry. MDMSPE involved the use of magnetic ZnFe₂O₄ nanotubes for adsorbing Se(VI). The sorbent was isolated from aqueous phase by using an external magnetic field instead of tedious centrifugation or filtration. In the following step, Se(IV) in the upper aqueous phase of MDMSPE was enriched by DLLME. Samples were prepared with artificial gastric juice to avoid the inter-conversion of target species. The main factors affecting the determination of the analytes were studied in detail. the detection limits of this method were 1.0 and 1.3 pg mL^-1 for Se(IV) and Se(VI) with relative standard deviations of 4.6% and 5.1% (c = 1.0 ng mL^-1, n = 9), respectively. An enrichment factor of 200 was obtained. This method was used for the detection of Se(IV) and Se(VI) in food samples without any pre-oxidation or pre-reduction operation. A certified reference material of milk powder was analysed by this method, and the determined values were in good agreement with the certified values. Recoveries of spike experiments were in the range of 91.0-107%.

A simple and green ultrasound liquid-liquid microextraction method based on low viscous hydrophobic deep eutectic solvent for the preconcentration and separation of selenium in water and food samples prior to HG-AAS detection

A simple and green ultrasound liquid-liquid microextraction method based on low viscous hydrophobic deep eutectic solvent (ULLME-LV-HDES) was proposed for the preconcentration and separation of selenium prior to HG-AAS detection. Six different DESs were prepared for the extraction of selenium. Quercetin was used complexing agent for Se(IV) ions. Various analytical parameters such as pH, quercetin amount, DES type and its volume, sonication time, sample volume were optimized. Tolerance limits of anion, cation and transition metal ions were studied. Preconcentration and enhancement factor were found 62.5 and 121. Under the optimum conditions, limit of detection was found 0.25 ng L^-1 with calibration range of 0.8-120 ng L^-1. Relative standard deviation was found 3.2%. The accuracy of the method was confirmed with certified reference materials (NIST 1567a Wheat flour and NIST 1548a Typical diet). Finally, the developed method was successfully applied to food and water samples.

Determination of selenite and selenomethionine in kefir grains by reversed-phase high-performance liquid chromatography-inductively coupled plasma-optical emission spectrometry

A new and efficient reversed-phase high-performance liquid chromatography-inductively coupled plasma-optical emission spectrometry method was developed for the simultaneous separation and determination of SeO₃ ^2- and seleno-dl-methionine in kefir grains. For the system, limits of detection and quantitation values for SeO₃ ^2- and seleno-dl-methionine were calculated as 0.52/1.73 mg/kg (as Se) and 0.26/0.87 mg/kg (as Se), respectively. After performing the system analytical performance, recovery experiment was done for kefir grains and percent recovery results for SeO₃ ^2- and seleno-dl-methionine were calculated as 98.4 ± 0.8% and 93.6 ± 1.0%, respectively. It followed by the feeding studies that the kefir grains were exposed to three different concentrations of SeO₃ ^2- (20, 30, and 50 mg/kg) for approximately 4 days at room temperature to investigate the conversion/non-conversion of SeO₃ ^2- to seleno-dl-methionine. Next, the fed grains were extracted with tetramethylammonium hydroxide pentahydrate solution (20%, w/w) and then sent to the developed system. There was no detectable seleno-dl-methionine found in fed kefir grains at different concentrations of SeO₃ ^2- while inorganic or elemental selenium in the fed kefir grains was determined between 1579.5 - 3116.0 mg/kg (as Se). Selenium species in the kefir grains samples was found in the form of SeO₃ ^2- proved by using an anion exchange column.

Recent Applications of Deep Eutectic Solvents in Environmental Analysis

The incessant generation of toxic waste and the growing concern over the environment have led the scientific community to delve into the search for more sustainable systems. In this regard, the application of deep eutectic solvents (DESs) has become one of the main strategies in green chemistry. These solvents have emerged as a promising alternative to conventional toxic solvents and even to the well-known ionic liquids. Their unique properties, components availability, and easy preparation, among others, have led to a new trend within the scientific community and industry, based on the use of these up-and-coming solvents not only in science but also in quotidian life. Among the areas that have benefited from the advantages of DESs is analytical chemistry, in which they have been largely used for sample preparation, including the extraction and determination of organic and inorganic compounds from environmental samples. The considerable number of applications developed in the last year in this field and the increasing generation of new data necessitate the continuous updating of the literature. This review pretends to compile the most relevant applications of DESs in environmental analysis and critically discuss them to provide a global vision about the advantages and drawbacks/limitations of these neoteric solvents in the area of environmental analysis.

Preparation of environmental samples for chemical speciation of metal/metalloids: A review of extraction techniques

Chemical speciation is a relevant topic in environmental chemistry since the (eco)toxicity, bio (geo)chemical cycles, and mobility of a given element depend on its chemical forms (oxidation state, organic ligands, etc.). Maintaining the chemical stability of the species and avoiding equilibrium disruptions during the sample treatment is one of the biggest challenges in chemical speciation, especially in environmental matrices where the level of concomitants/interferents is normally high. To achieve this task, strategies based on chemical properties of the species can be carried out and pre-concentration techniques are often needed due to the low concentration ranges of many species (μg L^-1 - ng L^-1). Due to the significance of the topic and the lack of reviews dealing with sample preparation of metal (loid)s (usually, sample preparation reviews focus on the total metal content), this work is presented. This review gives an up-to-date overview of the most common sample preparation techniques for environmental samples (water, soil, and sediments), with a focus on speciation of metal/metalloids and determination by spectrometric techniques. Description of the methods is given, and the most recent applications (last 10 years) are presented.

Selenium-Containing Proteins/Peptides from Plants: A Review on the Structures and Functions

Selenium is an essential microelement required for biological processes. Traditional selenium supplements (selenite and selenomethionine mainly) remain concerns due to toxicity and bioavailability. In recent decades, biofortification strategies have been applied to produce selenium-enriched edible plants to address the challenges of superior nutritional quality requirements. Plant-derived selenium-containing proteins/peptides offer potential health benefits beyond the basic nutritional requirements of Se. Highly nucleophilic seleno-amino acids, special peptide sequences, and favorable bioavailability contribute to the biological activities of selenium-containing proteins/peptides, such as antioxidant, antihypertensive, anti-inflammatory, and immunomodulatory effects. However, their applications on a commercial scale are insufficient owing to the complexity of purification and identification techniques and the sparse information on bioavailability and metabolism. In this review, selenium status, structural features, bioactivities, structure-activity relationships, and bioavailability, as well as the mechanisms underlying the bioactivities and metabolism of plant-derived selenium-containing proteins/peptides, are summarized and discussed for their nutraceutical use.

Selenium treatment modulates fluoride distribution and mitigates fluoride stress in tea plant (Camellia sinensis (L.) O. Kuntze)

Tea plants (Camellia sinensis (L.) O. Kuntze) can hyperaccumulate fluoride (F). The accumulation of F in tea leaves may induce serious health problems in tea consumers. It has been reported that selenium (Se) could reduce the accumulation of heavy metals in plants. Thus, the aim of this study was to investigate whether exogenous Se could reduce F accumulation in tea plant. The results showed that Se treatment could decrease F content in tea leaves, increase F accumulation in roots, decrease the proportion of water-soluble F in tea leaves and increase the Se content. Low F levels promoted the accumulation of Se in tea plants. Se treatment could modulate F-induced oxidative injury by decreasing malondialdehyde level and increasing the activities of superoxide dismutase, peroxidase and catalase. Moreover, Se inhibited F-induced increase in leaf iron, calcium, aluminum, leaf and root magnesium and lead contents. These results showed that Se application could decrease F content and increase Se content in tea leaves, which may be served as a novel strategy for production of healthy tea.

Determination of trace levels of selenium in natural water, agriculture soil and food samples by vortex assisted liquid-liquid microextraction method: Multivariate techniques

A green vortex assisted based liquid-liquid microextraction (VA-LLME) method was developed for preconcentration of selenium. Ammonium pyrrolidine dithiocarbamate (APDC) was used to form a hydrophobic complex with selenium in natural water, agricultural soil and food samples by GFAAS. Whereas Triton X-114, a nonionic surfactant and 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid were used for Se extraction as a dispersing medium. The conical flasks contents were shack on a vortex mixer to increase the extraction efficiency. Multivariate techniques were used to evaluate extraction parameters; pH, vortex time, APDC amount, volume of ionic liquid and Triton X-114 and centrifugation rate on the recovery of Se. The central composite design (CCD) was used for further optimization of the essential extraction parameters. The enhancement factor and limit of detection were obtained as 98.7 and 0.07 µg L^-1. The certified reference materials was used for accuracy of method and the related standard deviation was found to be 3.51%. The resulted data indicated that concentrations of Se in all types of water samples were below the permissible limit recommended by WHO.

Deep-eutectic-solvent-based dispersive and emulsification liquid-liquid microextraction methods for the speciation of selenium in water and determining its total content levels in milk formula and cereals

Rapid and environmentally friendly ultrasound-assisted dispersive liquid-liquid microextraction (US-DLLμE) and vortex assisted-emulsification liquid-liquid microextraction (VA-ELLμE) methods are proposed for the speciation of selenium in domestic and mineral water samples. A deep eutectic solvent (DES) prepared with different ratios of choline chloride and phenol is used as an extractant for hydrophobic tetravalent Se complexed with diethyldithiocarbamate in different water samples. The total inorganic Se species levels in water samples were determined via reducing Se(vi) to Se(iv), using sodium thiosulphate as a reducing agent. The total Se levels in formula milk and cereal samples were determined after microwave acid digestion. The different heating steps in GFAAS were also optimized. The analytical parameters for US-DLLμE and VA-ELLμE, including pH, the volume of complexing agent, the ultrasound and vortex mixing shaking times, and the volume and composition of the deep eutectic solvent, were optimized. The accuracies of both methods were confirmed based on the analysis of a certified reference material (CRM) BCR 189 (wholemeal flour). The enhancement factor (EF) and limit of detection (LOD) for Se(iv) via US-DLLμE were found to be 90.8 and 0.029 μg L^-1, respectively, whereas an EF of 81.8 and LOD of 0.036 μg L^-1 were obtained via VA-ELLμE. The % relative standard deviation (%RSD) values obtained based on the analysis of six replicate standards under the optimized conditions for US-DLLμE and VA-ELLμE were found to be 4.2 and 5.8%, respectively. The optimized methods were applied to different drinking water samples, and acid-digested milk formula and baby cereal food samples.

A Review of the Use of Eutectic Solvents, Terpenes and Terpenoids in Liquid–liquid Extraction Processes

Diverse and abundant applications of the eutectic solvents have appeared in the last years. Their promising tunable properties, eco-friendly character and the possibility of being prepared from numerous compounds have led to the publication of numerous papers addressing their use in different areas. Terpenes and terpenoids have been employed in the formulation of eutectic solvents, though they also have been applied as solvents in extraction processes. For their hydrophobic nature, renewable character, low environmental impact, cost and being non-hazardous, they have also been proposed as possible substitutes of conventional solvents in the separation of organic compounds from aqueous streams, similarly to hydrophobic eutectic solvents. The present work reviews the application of eutectic solvents in liquid–liquid extraction and terpenes and terpenoids in extraction processes. It has been made a research in the current state-of-the-art in these fields, describing the proposed applications of the solvents. It has been highlighted the scale-up feasibility, solvent regeneration and reuse procedures and the comparison of the performance of eutectic solvents, terpenes and terpenoids in extraction with conventional organic solvents or ionic liquids. Ultimately, it has been also discussed the employ of predictive methods in extraction, the reliability of thermodynamic models in correlation of liquid–liquid equilibria and simulation of liquid–liquid extraction processes.

Salting-out strategy for speciation of selenium in aqueous samples using centrifuge-less dispersive liquid-liquid microextraction

The centrifuge-less dispersive liquid-liquid microextraction (DLLME) technique was used to separate selenium species in aqueous samples. According to the salting-out effect, a simple approach was used to eliminate the centrifugation step. The optimization of the independent variables was performed using chemometric methods. Under optimal conditions, this methodology was statistically validated. The linearity was between 20 and 300 μg L^-1. The limit of detection and quantification were calculated 3.4 μg L^-1 and 10.4 μg L^-1, respectively. The values of reproducibility and repeatability were determined ≤ 9.5% and ≤ 6.4, respectively. The possibility of the method was successfully assessed by analyzing the analytes in real samples clarified satisfactory recoveries (98.1-101.4% for Se (IV) and 98.4-101.5% for Se (VI)).

Recent Application of Deep Eutectic Solvents as Green Solvent in Dispersive Liquid-Liquid Microextraction of Trace Level Chemical Contaminants in Food and Water

As growing concerns on green, cost-effective, and time-saving chemistry analysis methods, deep eutectic solvents (DESs) are considered to be promising green alternatives to conventional solvents in dispersive liquid-liquid microextraction (DLLME) of trace level chemical contaminants in food and water, due to their biodegradability, low cost, and simple preparation. In the past few years, numerous innovative researches have focused on preconcentration of trace level chemical contaminants using DESs as extractant. In this context, this review aims to summarize the updated state-of-the-art effort dedicated to preconcentration of trace level chemical contaminants in food and water sample using DESs as extractants in DLLME. Furthermore, the major impact factors affecting the preconcentration efficiency and process mechanisms are thoroughly analyzed and discussed. Finally, prospects and challenges in application of DESs as solvents in DLLME to enrich trace level chemical contaminants are extensively elucidated and critically reviewed.