Nitrogen-doped carbon dots rapid and selective detection of mercury ion and biothiol and construction of an IMPLICATION logic gate

Ultrasensitive pH-switchablenitrogen doped carbon dots for MnO4- detection and fluorescent anti-counterfeiting

Herein, high-efficiency green fluorescence nitrogen doped CDs (G-CDs) were prepared using acetaminophen and ethylenediamine as precursors. The G-CDs exhibited good anti-photobleaching, salttolerance and low cytotoxicity. Interestingly, the G-CDs revealed excellent fluorescence stability in the pH range of 6-12, however, the intensity of the G-CDs was almost completely quenched in other pH values. The MnO4- demonstrated strong fluorescence quenching capability on our G-CDs with the mechanism involving dynamic quenching caused by energy transfer. G-CDs exhibited a strong linear relationship with MnO4- concentration in the range of 0-75 μmol/L, with a low limit detection of 7.6 nmol/L. What was even more interesting was that the G-CDs displayed bright green solid-state fluorescence, and exhibited potential application in anti-counterfeiting.

A carbon dots-MnO2 nanosheet-based turn-on pseudochemodosimeter as low-cost probe for selective detection of hazardous mercury ion contaminations in water

Mercury is a highly hazardous element due to its profound toxicity and wide abundance in the environment. Despite the availability of various fluorimetric detection tools for Hg2+, including organic fluorophores and aptasensors, they often suffer from shortcomings like the utilization of expensive chemicals and toxic organic solvents, multi-step synthesis, sometimes with poor selectivity and low sensitivity. Whereas, biomass-derived fluorophores, such as carbon dots (CDs), present themselves as cost-effective and environmentally benign alternatives that exhibit comparable efficacy. Herein, we report a reaction-driven sensing assembly based on CDs, MnO2 nanosheets, and hydroquinone monothiocarbonate (HQTC) for the detection of Hg2+ ions, which relies on the formation of a CDs-MnO2 FRET-conjugate, resulting in the quenching of the intrinsic fluorescence of CDs. In a pseudochemodosimetric approach, the thiophilic nature of mercury was utilized for in-situ generation of the reducing species, hydroquinone from HQTC, resulting in the reduction of MnO2 nanosheets, the release of fluorescent CDs back to the solution. The low limit of detection (LOD) was achieved as 2 ppb (0.01 μM). The probe worked efficiently in real water samples like sea, river with good recovery of spiked Hg2+ and in some Indian ayurvedic medicines as well. Furthermore, solid-phase detection with sodium alginate beads demonstrated the ability of this cost-effective sensing assembly for onsite detection of Hg2+ ions.

Application of surface nitrogen-doped graphene quantum dots in the sensing of ferric ions and glutathione: Spectroscopic investigations and DFT calculations

Developing a sensing platform that can quickly and accurately measure glutathione (GSH) is crucial for the early detection of various human diseases. GQDs have shown great potential in many technological and biological applications. This study focused on synthesizing nitrogen-doped GQDs (NGQDs) with stable blue fluorescence using a simple and easy hydrothermal method in one step. The bamboo fiber was used as the green source for this synthesis. The NGQDs had a tiny particle size of 4.7 nm and emitted light at 405 nm when excited. They displayed a remarkable quantum yield of 40.36 % and were effectively used as fluorescent probe to specifically detect Fe3+. The energy transfer mechanism led to the NGQDs' fluorescence being deactivated by Fe3+ ions (turn- "off"). However, with the addition of GSH to the system, the fluorescence intensity of NGQDs was reactivated (turn- "on"). Thus, a fluorescence turn "off-on" system was developed for the sensitive detection of Fe3+ and GSH. Using density functional theory (DFT), it was theoretically calculated that the surface of the fabricated NGQDs possess lone pairs of electrons on oxygens and doped nitrogen causing a photo-induced electron transfer (PET) process to occur. This PET process was suppressed previously owing to complex formation between oxygen atoms of modeled structure and ferric ions. The sensing platform displayed a sensitive response to Fe3+ in the 1-1000 μM range with LOD of 34 nM and GSH in the range of 1-50 μM, with a detection limit of 45 nM. Furthermore, the NGQDs exhibited high selectivity towards Fe3+ and GSH over other electrolytes and biomolecules. Additionally, the probe exhibited non-cytotoxicity and was practically applicable for the detection of GSH in HeLa cells.

Rapid and sensitive determination of Piroxicam by N-doped carbon dots prepared by plant soot

Piroxicam (PX) as a nonsteroidal anti-inflammatory drug (NSAID) can be effectively used for anti-inflammatory and analgesia. However, overdoses may induce side effects such as gastrointestinal ulcers and headaches. Therefore, the assay of piroxicam has considerable significance. In this work, nitrogen-doped carbon dots (N-CDs) was synthesized for PX detection. The fluorescence sensor was fabricated by hydrothermal method with plant soot and ethylenediamine. The strategy exhibited a detection range of 6-200 μg/mL and 250-700 μg/mL with the limited detection of 2 μg/mL. The mechanism of the PX assay base on the fluorescence sensor was the process of electron transfer between the PX and N-CDs. The assay subsequently demonstrated could be successfully used in actual sample. The results indicated that the N-CDs could be a superior candidate nanomaterial for piroxicam monitoring in the healthcare product industry.

Nitrogen-doped carbon dots: Recent developments in its fluorescent sensor applications

Doped carbon dots have attracted great attention from researchers across disciplines because of their unique characteristics, such as their low toxicity, physiochemical stability, photostability, and outstanding biocompatibility. Nitrogen is one of the most commonly used elements for doping because of its sizeable atomic radius, strong electronegativity, abundance, and availability of electrons. This distinguishes them from other atoms and allows them to perform distinctive roles in various applications. Here, we have reviewed the most current breakthroughs in nitrogen-doped CDs (N-CDs) for fluorescent sensor applications in the last five years. The first section of the article addresses several synthetic and sustainable ways of making N-CDs. Next, we briefly reviewed the fluorescent features of N-CDs and their sensing mechanism. Furthermore, we have thoroughly reviewed their fluorescent sensor applications as sensors for cations, anions, small molecules, enzymes, antibiotics, pathogens, explosives, and pesticides. Finally, we have discussed the N-CDs' potential future as primary research and how that may be used. We hope that this study will contribute to a better understanding of the principles of N-CDs and the sensory applications that they can serve.

Highly selective adsorption of Hg (II) from aqueous solution by three-dimensional porous N-doped starch-based carbon

For the first time, N-doped carbon materials with 3D porous-layered skeleton structure was synthesized through a one-step co-pyrolysis method, which was fabricated by co-pyrolysis of natural corn starch and melamine using metal catalysts (Ni (II) and Mn (II)). The 3D-NC possessed a heterogeneously meso-macroporous surface with a hierarchically connected sheet structure inside. Batch adsorption experiments suggested that highly selective adsorption of Hg (II) by the 3D-NC could be completed within 90 min and had maximum adsorption capacities as high as 403.24 mg/g at 293 K, pH = 5. The adsorption mechanism for Hg (II) was carefully evaluated and followed the physical adsorption, electrostatic attraction, chelation, and ion exchange. Besides, thermodynamic study demonstrated that the Hg (II) adsorption procedure was spontaneous, endothermic, and randomness. More importantly, the 3D-NC could be regenerated and recovered well after adsorption-desorption cycles, showing a promising prospect in the remediation of Hg (II)-contaminated wastewater.

Facile hydrothermal synthesis and purification of fluorescent carbon dots for food colorant tartrazine detection based on a dual-mode nanosensor

Colorant tartrazine is widely used in the food industry, but its long-term and excessive consumption is harmful to human health. Therefore, it is necessary to establish a sensitive detection method for tartrazine. Blue fluorescent carbon dots with L-arginine and o-phenylenediamine as precursors, namely L-Arg/oPD-CDs, were prepared via the hydrothermal method. Then, L-Arg/oPD-CDs were further purified by dialysis, thin layer chromatography and column chromatography. A dual-mode nanosensor based on fluorescent and UV absorption was successfully developed. Excellent linear ranges of 0-5 μM and 10-50 μM were obtained with a low detection limit of 42.3 nM based on fluorescence. A good linear range of 0-50 μM was obtained with a low detection limit of 130.15 nM based on UV absorption. The quenching mechanism of tartrazine towards L-Arg/oPD-CDs fluorescence was the inner filter effect. In addition, a dual-mode nanosensor was used for tartrazine determination in millet, maize flour, carbonated drink, and sugar samples. This study provides new insight into the detection of tartrazine by applying a dual-mode nanosensor.

Metal ion sensing with graphene quantum dots: detection of harmful contaminants and biorelevant species

Graphene quantum dots (GQDs) are attractive materials for use as highly selective and sensitive chemical sensors, owing to their simple preparation and affordability. GQDs have been successfully deployed as sensors for toxic metal ions, which is a significant issue due to the ever-increasing environmental contamination from agricultural and industrial activities. Despite the success of GQDs in this area, the mechanisms which underpin GQD-metal ion specificity are rarely explored. This lack of information can result in difficulties when attempting to replicate published procedures and can limit the judicious design of new highly selective GQD sensors. Furthermore, there is a dearth of GQD examples which selectively detect biologically relevant alkali and alkaline earth metals. This review will present the current state of GQDs as metal ion sensors for harmful contaminants, highlighting and discussing the discrepancies that exist in the proposed mechanisms regarding metal ion selectivity. The emerging field of GQD sensors for biorelevant metal ion species will also be reviewed, with a perspective to the future of this highly versatile material.

Intelligent multicolor nano-sensor based on nontoxic dual fluoroprobe and MOFs for colorful consecutive detection of Hg2+ and cysteine

Ultrasensitive detection of Hg²⁺ in aquatic ecosystems is of great significance due to its high toxicity and ubiquity in water. Herein, using a one-step in-situ synthesis method, blue fluorescent carbon dots (CDs), red fluorescent InP/ZnS quantum dots (InPQDs), and MOFs (ZIF-8) integrated multicolor nano-sensor CDs/InPQDs@ZIF-8 was constructed for consecutive visual detection of Hg²⁺ and Cys. The InPQDs can act as the response unit for Hg²⁺ and Cys, with the limit of detection (LOD) of 8.68 and 37.96 nM, respectively. Significantly, the low detection limit combines with good specificity and accuracy of the nano-sensor meet the requirement for the safety monitoring and control of Hg²⁺ in drinking and environmental water. Moreover, the color recognition and processing software installed on smart phone can realize the real-time and rapid sensing of Hg²⁺ and Cys. A logic gate circuit was also devised, providing the possibilities for the application of the nano-sensor in the field of intelligent devices. As far as we know, this was the first example to apply InPQDs to the continuous multicolor visual detection of Hg²⁺ and Cys, which provided reference for the construction of environmentally-friendly dual emission fluorescent sensors for hazardous substance monitoring.

PVDF/SiO2-g-CDs blended membrane for fluorescence detection and adsorption of metal ions

The preparation method of PVDF/SiO₂-g-CDs blended membrane was that the silanized modified carbon dots (CDs) were grafted onto the PVDF/SiO₂ blended membrane surface. The surface composition, morphology, hydrophilicity, fluorescence performance and metal ions adsorption performance of PVDF/SiO₂-g-CDs blended membrane were studied. The fluorescence quenching effect of the membrane with Hg²⁺ and Fe³⁺ was obvious. The quenching mechanism was the complexation of metal ions with the functional groups of CDs including -NH₂, -OH and -COOH. The optical detection limits of PVDF/SiO₂-g-CDs blended membrane for Hg²⁺ was 1.6 nM in the linear range of 0.0025-20 μM, and the optical detection limits for Fe³⁺ was 2.1 μM in the linear range of 0.5-5000 μM. The maximum adsorption capacity of PVDF/SiO₂-g-CDs blended membrane for Fe³⁺ was 47.04 mg·g^-1. The adsorption of the membrane conformed to the pseudo-second-order kinetics and Langumir model, and belonged to monolayer chemical adsorption on the membrane surface. Through adsorption thermodynamic analysis, adsorption was a spontaneous endothermic process. The recovery rate of fluorescence and adsorption capacity could still be maintained above 82% after five cycles. The PVDF/SiO₂-g-CDs blended membrane had the ability to regenerate. In summary, the PVDF/SiO₂-g-CDs blended membrane had the dual functions of detecting and adsorbing metal ions, and had broad application prospects in sewage treatment.

A highly selective and sensitive "on-off" fluorescent probe for detecting cadmium ions and l-cysteine based on nitrogen and boron co-doped carbon quantum dots

Cadmium ions (Cd2+) have caused relatively serious pollution, threatening human health and ecosystems. l-Cysteine (l-Cys) is an essential amino acid in living organisms and concentration of l-Cys is closely related to some human diseases. In this work, we first introduced 2-amino-3-hydroxypyridine and sodium borohydride as the nitrogen source and boron source to fabricate boron and nitrogen co-doped carbon quantum dots (N,B-CQDs) with high fluorescence quantum yield (21.2%), which were synthesized through a simple, low-consumption and pollution-free one-pot hydrothermal method. The obtained N,B-CQDs are able to detect Cd2+ rapidly and sensitively through fluorescence enhancement, which may be ascribed to chelation enhanced fluorescence that is induced by the formation of the N,B-CQDs/Cd2+ complex. Simultaneously, N,B-CQDs can be used to detect l-cysteine because significant fluorescence quenching was observed when l-Cys was added into the N,B-CQDs/Cd2+ system. In the two fluorescence "turn-on" and "turn-off" processes, this fluorescent probe obtained a good linear relationship over Cd2+ concentration ranging from 2.5 µM to 22.5 µM with a detection limit of 0.45 µM, while the concentration of l-cysteine showed a linear relationship in the range of 2.5-17.5 µM with a detection limit of 0.28 µM. The sensor has been successfully used to detect Cd2+ and l-cysteine in real samples with satisfying results.

Sulfhydryl functionalized carbon quantum dots as a turn-off fluorescent probe for sensitive detection of Hg2

Mercury ion (Hg2+) is one of the most toxic heavy metal ions and lowering the detection limit of Hg2+ is always a challenge in analytical chemistry and environmental analysis. In this work, sulfhydryl functionalized carbon quantum dots (HS-CQDs) were synthesized through a one-pot hydrothermal method. The obtained HS-CQDs were able to detect mercury ions Hg2+ rapidly and sensitively through fluorescence quenching, which may be ascribed to the formation of nonfluorescent ground-state complexes and electron transfer reaction between HS-CQDs and Hg2+. A modification of the HS-CQD surface by -SH was confirmed using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The HS-CQDs sensing system obtained a good linear relationship over a Hg2+ concentration ranging from 0.45 μM to 2.1 μM with a detection limit of 12 nM. Delightfully, the sensor has been successfully used to detect Hg2+ in real samples with satisfactory results. This means that the sensor has the potential to be used for testing actual samples.

Production of nitrogen-doped carbon quantum dots with controllable emission wavelength, excellent sensing of Fe3+ in aqueous solution, and potential application for stealth quick response coding in the visible regime

Nitrogen-doped carbon quantum dots (N-CQDs) exhibit a high quantum yield with controllable emission wavelength and intensity in the blue-green regime. N-CQDs were tested and determined to be thermally and optically stable during 150 °C heat treatment and prolonged UV irradiation. Potential applications of N-CQDs were demonstrated, including excellent Fe³⁺ sensing in aqueous solution, fluorescent polymer fibres, and stealth quick response coding at visible wavelengths.

Carbon quantum dots have received attention due to their environmental friendliness, low biological toxicity and production cost. Polymer–CQD composite fibers, detection of Fe³⁺, and stealthy fluorescent labels made by thermal transfer printing are potential applications.

Chitosan-derived N-doped carbon dots for fluorescent determination of nitrite and bacteria imaging

N-doped carbon dots (N-CDs) were successfully synthesized via simple one-step hydrothermal carbonization using chitosan as carbon and nitrogen sources. The obtained N-CDs contained a variety of functional groups on the NCDs surface, and exhibited excitation-independent behavior and strong blue fluorescence with a relatively higher fluorescence quantum yield (QY = 35%). It also presented excellent water solubility, resistance to pH change, high ion strength and UV irradiation. Since the fluorescence of the N-CDs could be selectively quenched by NO₂^-, they could act as a fluorescent sensor for the determination of NO₂^- in real tap water and lake water samples with a wide linear range (1-500 μM) and low detection limit (0.1 μM). They could also be used for bacterial imaging as multicolor fluorescent probes. The results indicated that N-CDs could be a promising candidate material for biomedical applications.

Novel Hg (II) selective fluorescent green sensor based on carbon dots synthesized from starch and functionalized with methimazole

We describe a green new method for the synthesis of water-soluble photoluminescent carbon dots (CDs) that were functionalized with methimazole (MTZ) and applied to determine Hg²⁺ based on the fluorescence extinction. Starch obtained from rice was used as a natural source for the production of CDs by hydrothermal treatment. Also, it was proposed a factorial design to optimize the parameters for CD synthesis and the results showed that the luminescence intensity is a function of temperature and not of the heating time in the hydrothermal process. The synthesized CDs were characterized using fluorescence techniques, Fourier transform infrared spectroscopy (FTIR), and UV-Vis spectroscopy. Through transmission electron microscopy (TEM) and dynamic light scattering (DLS), it was found the formation of CDs on a nanometer scale with an average size of 11 nm. The functionalization with MTZ, eliminated all interferences from other metals, indicating a selective response to Hg²⁺ ions. The method was applied to Hg²⁺ determination in waters. Under optimal conditions, was obtained a limit of detection of 1.8 × 10^-7 mol L^-1 with a linear range from 3.3 × 10^-7 to 50.0 × 10^-6 mol L^-1. Therefore, the proposed method can be considered a simple, selective, and precise alternative that minimizes the number of reagents used for Hg²⁺ determination in natural waters, and can be applied on a large scale in environmental analyzes.

AIEgen modulated per-functionalized flower-like IRMOF-3 frameworks with tunable light emission and excellent sensing properties

A series of functional IRMOF-3 frameworks with solid-state luminescence and tuneable light emission (from 490 to 608 nm) have been synthesized by per-functionalizing AIE-active Schiff-bases with zinc. These precursor AIE-active ligands endowed the functional frameworks with boosted fluorescence emission efficiencies (from 0.16% to 1.03%). IRMOF-3-h revealed a flower-like morphology attributed to the formation of J-aggregates, and could be used as a fluorescent probe for sensitive detection of copper(ii) (135 pM) and thiols (subnanomole).

Carbon Dots-Based Logic Gates

Carbon dots (CDs)-based logic gates are smart nanoprobes that can respond to various analytes such as metal cations, anions, amino acids, pesticides, antioxidants, etc. Most of these logic gates are based on fluorescence techniques because they are inexpensive, give an instant response, and highly sensitive. Computations based on molecular logic can lead to advancement in modern science. This review focuses on different logic functions based on the sensing abilities of CDs and their synthesis. We also discuss the sensing mechanism of these logic gates and bring different types of possible logic operations. This review envisions that CDs-based logic gates have a promising future in computing nanodevices. In addition, we cover the advancement in CDs-based logic gates with the focus of understanding the fundamentals of how CDs have the potential for performing various logic functions depending upon their different categories.

Self-powered molecule release systems activated with chemical signals processed through reconfigurable Implication or Inhibition Boolean logic gates

The Implication (IMPLY) and Inhibition (INHIB) Boolean logic gates were realized using switchable chimeric pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH-Clamp) containing a fused affinity clamp unit recognizing a signal-peptide. The second component of the logic gate was the wild-type PQQ-glucose dehydrogenase working cooperatively with the PQQ-GDH-Clamp enzyme. The IMPLY and INHIB gates were realized using the same enzyme composition activated with differently defined input signals, thus representing reconfigurable logic systems. The logic gates were first tested while operating in a solution with optical analysis of the output signals. Then, the enzymes were immobilized on a buckypaper electrode for electrochemical transduction of the output signals. The switchable modified electrodes mimicking the IMPLY or INHIB logic gates were integrated with an oxygen-reducing electrode modified with bilirubin oxidase to operate as a biofuel cell activated/inhibited by various input signal combinations processed either by IMPLY or INHIB logic gates. The switchable biofuel cell was used as a self-powered device triggering molecule release function controlled by the logically processed molecule signals.

Biocompatible nitrogen-doped carbon dots: synthesis, characterization, and application

Carbon dots (CDs) are promising materials for biomedical applications owing to their unique properties, biocompatibility, and biodegradability. The current studies on CDs are focused on improving their functionality by modulating their electronic structure, which helps in controlling their chemical, optical, and electrical properties. Doping with heteroatoms is a typical approach for modulating the electronic structure of CDs. In particular, there has been considerable progress in nitrogen-doped CDs for improving their potential for various biomedical applications, including optical imaging, drug delivery, and light-mediated imaging/therapeutic applications such as photoacoustic imaging, photothermal therapy, and photodynamic therapy. In this review, the important features of nitrogen-doped CDs are discussed along with the recent studies on these materials and their prospects.

Highly selective sensor for the detection of Hg2+ ions using homocysteine functionalised quartz crystal microbalance with cross-linked pyridinedicarboxylic acid

This study reports an insightful portable vector network analyser (VNA)-based measurement technique for quick and selective detection of Hg2+ ions in nanomolar (nM) range using homocysteine (HCys)-functionalised quartz-crystal-microbalance (QCM) with cross-linked-pyridinedicarboxylic acid (PDCA). The excessive exposure to mercury can cause damage to many human organs, such as the brain, lungs, stomach, and kidneys, etc. Hence, the authors have proposed a portable experimental platform capable of achieving the detection in 20-30 min with a limit of detection (LOD) 0.1 ppb (0.498 nM) and a better dynamic range (0.498 nM-6.74 mM), which perfectly describes its excellent performance over other reported techniques. The detection time for various laboratory-based techniques is generally 12-24 h. The proposed method used the benefits of thin-film, nanoparticles (NPs), and QCM-based technology to overcome the limitation of NPs-based technique and have LOD of 0.1 ppb (0.1 μg/l) for selective Hg2+ ions detection which is many times less than the World Health Organization limit of 6 μg/l. The main advantage of the proposed QCM-based platform is its portability, excellent repeatability, millilitre sample volume requirement, and easy process flow, which makes it suitable as an early warning system for selective detection of mercury ions without any costly measuring instruments.

Fluorescence for biological logic gates

Biological logic gates are smart probes able to respond to biological conditions in behaviors similar to computer logic gates, and they pose a promising challenge for modern medicine. Researchers are creating many kinds of smart nanostructures that can respond to various biological parameters such as pH, ion presence, and enzyme activity. Each of these conditions alone might be interesting in a biological sense, but their interactions are what define specific disease conditions. Researchers over the past few decades have developed a plethora of stimuli-responsive nanodevices, from activatable fluorescent probes to DNA origami nanomachines, many explicitly defining logic operations. Whereas many smart configurations have been explored, in this review we focus on logic operations actuated through fluorescent signals. We discuss the applicability of fluorescence as a means of logic gate implementation, and consider the use of both fluorescence intensity as well as fluorescence lifetime.

Carbon dots as rapid assays for detection of mercury(II) ions based on turn-off mode and breast milk

In this research, nitrogen co-doped carbon dots were synthesized by solid thermal method with citric acid used as the precursor of carbon, and melamine as nitrogen source. Such carbon dots show high quantum yield of 44%. Furthermore, the native fluorescence of CDs can be reduced by mercury(II), while other metals had no significant influence on fluorescence intensity. During the study, the optimal parameters were selected, such as pH or time for incubation with analyte. Under the optimal conditions, quenching effect caused by mercury ions was evaluated. It was observed that with increasing mercury concentration, the fluorescence of the carbon dots decreased proportionally. The response was characterized by linearity within the range from 2 to 14 μM. Moreover, the limit of detection was 0.44 μM. It was the first time that human milk was used as a real sample to test the applicability of carbon dots. The study results demonstrated good recovery in the 74-111% range (RSD < 6%) As a novel carbon material, CDs show promise for broader applications in analyzing complicated biological samples.

One minute synthesis of green fluorescent copper nanocluster: The preparation of smartphone aided paper-based kit for on-site monitoring of nanomolar level mercury and sulfide ions in environmental samples

We wish to report, a minute synthesis of green fluorescent copper nanocluster by simple sonication. 1-Thio-β-d-glucose was used as a capping ligand to synthesis copper nanocluster (TG-CuNCs). The TG-CuNCs exhibit the emission maximum at 430 nm. The synthesized TG-CuNCs was well characterized by UV-vis, fluorescent, XRD, HR-TEM and FT-IR techniques. After the addition of Hg²⁺ or S^2- into TG-CuNCs, the fluorescence was quenched. Based on the quenching of fluorescence, we have calculated the detection limit 1.7 nM and 1.02 nM for Hg²⁺ and S^2-, respectively. Finally, we have applied TG-CuNCs for the detection of Hg²⁺ and S^2- in tap, river, pond water. Importantly, the smartphone aided paper-based kit was developed for on-site monitoring of Hg²⁺ and S^2- ions. To the best of our knowledge, this is the first report for the one-minute synthesis of TG-CuNCs and the preparation of smartphone aided paper-based kit for on-site monitoring of Hg²⁺ and S^2- ions. Further, it is anticipated that this synthesis of TG-CuNCs and smartphone aided paper-based kit for Hg²⁺ and S^2- will be useful materials in the filled with the biosensor, material science and nanotechnology.

"On-off-on" detection of Fe3+ and F-, biological imaging, and its logic gate operation based on excitation-independent blue-fluorescent carbon dots

A fluorescent nanoprobe based on carbon dots (CDs) has been facilely synthesized by a one-step hydrothermal pyrolysis of salicylic acid and utilized for the sequential detection of Fe³⁺ and F^- in vitro. The fluorescence of CDs can be extinguished dramatically by Fe³⁺ based on static quenching and subsequently recovery upon addition of F^- due to the formation of stabler FeF₃. The probe exhibits high selectivity and sensitivity toward Fe³⁺ and F^- with a good linearity in the range of 10-300 μM and 0.1-200 μM, respectively, and a low detection limit of 52 nM and 8.5 nM, respectively. More importantly, as-prepared CDs with exceedingly fluorescence stability, negligible toxicity and superior biocompatibility have been expanded for detection Fe³⁺ and F^- in living cell and Escherichia coli. Furthermore, an "AND" logic gate based on as-obtained CDs has been constructed.

White pepper-derived ratiometric carbon dots for highly selective detection and imaging of coenzyme A

A new-style white pepper derived dual-emission carbon dots (CDs) with a quantum yield of 10.4% was designed and facile constructed with one-pot solvothermal method. The green emission (520 nm) had an efficient and special "turn-on" fluorescence sensing of coenzyme A (CoA) with the aid of Cu²⁺, while red emission (668 nm) barely changed and worked as reference. In the concentration range (0-150 µM), relative fluorescence intensity ratios (F₅₂₀/F₆₆₈) showed excellent linear correlation with concentrations of CoA, and detection limit was as low as 8.75 nm. Moreover, the strategy has been successfully applied for label-free detection of CoA in real pig liver samples with good recoveries (93.3-108.0%). Notably, the synthesized CDs had durable fluorescence, low cytotoxicity, and good biocompatibility for cellular imaging, which demonstrated wide and promising applicability for biosensing and bioimaging in the future.

Green synthesis of carbon dots by celery leaves for use as fluorescent paper sensors for the detection of nitrophenols

Schematic of synthesis CDs, extending to paper sensor and using in detection.

N,S co-doped carbon dots as a dual-functional fluorescent sensor for sensitive detection of baicalein and temperature

In this work, nitrogen and sulfur dual-doped CDs (N,S-CDs) were prepared via a facile one-pot hydrothermal method from citric acid and N-acetyl-L-cysteine with a high quantum yield (QY) of 49%. As-fabricated N,S-CDs had a size around 2.5 nm and exhibited excitation-independent emission and excellent luminescent properties. The fluorescent sensor based on the N,S-CDs showed a highly sensitive detection of baicalein with a detection limit (LOD) of 0.21 μmol L^-1 in the linear range from 0.69 to 70.0 μmol L^-1. The fluorescence of the N,S-CDs could be effectively quenched by baicalein based on static quenching. In addition, the temperature sensor based on the synthesized N,S-CDs showed a good linear relationship between temperature and fluorescence (FL) intensity with a temperature range from 5 °C to 75 °C. Furthermore, the synthesized N,S-CDs were successfully applied to the measurement of baicalein in real samples. In a word, the N,S-CDs had great potential to be worked as fluorescence sensors to monitor the concentration of baicalein and temperature.

Recent Advancements in Doped/Co-Doped Carbon Quantum Dots for Multi-Potential Applications

Carbon quantum dots (CQDs)/carbon nanodots are a new class of fluorescent carbon nanomaterials having an approximate size in the range of 2–10 nm. The majority of the reported review articles have discussed about the development of the CQDs (via simple and cost-effective synthesis methods) for use in bio-imaging and chemical-/biological-sensing applications. However, there is a severe lack of consolidated studies on the recently developed CQDs (especially doped/co-doped) that are utilized in different areas of application. Hence, in this review, we have extensively discussed about the recent development in doped and co-doped CQDs (using elements/heteroatoms—e.g., boron (B), fluorine (F), nitrogen (N), sulphur (S), and phosphorous (P)), along with their synthesis method, reaction conditions, and/or quantum yield (QY), and their emerging multi-potential applications including electrical/electronics (such as light emitting diode (LED) and solar cells), fluorescent ink for anti-counterfeiting, optical sensors (for detection of metal ions, drugs, and pesticides/fungicides), gene delivery, and temperature probing.

Improvement of selectivity via the surface modification of carbon nanodots towards the quantitative detection of mercury ions

Highly fluorescent carbon nanodots are promising fluorophores for biochemical, pharmaceutical, and environmental analysis due to their facile preparation, biocompatibility, tunability, and low-cost precursors.

Lowering the detection limit towards nanomolar mercury ion detection via surface modification of N-doped carbon quantum dots

Surface modification of carbon dots can lower the detection limit of trace analysis which is challenging in analytical chemistry and environmental analysis.