Development of a chemiluminescent aptasensor for ultrasensitive and selective detection of aflatoxin B1 in peanut and milk

Ionic liquid-enhanced silica aerogels for the specific extraction and detection of aflatoxin B1 coupled with a smartphone-based colorimetric biosensor

The polymer ionic liquid (1-allyl-3-butylimidazolium bromide) enhanced silica aerogel was modified onto the surface of stainless-steel mesh to immobilize aptamer-1 for the specific recognition of AFB1. The porous channels of silica aerogel could prevent the interference of macromolecules in food samples. Enzyme kinetic analysis showed that the MoS2/Au was an effective peroxidase mimic with a relatively low Michaelis constant (Km) value of 0.17 mM and a high catalytic rate of 3.87 × 10-8 mol (L·s)-1, which exhibited obvious superiority compared with horseradish peroxidase. The established "sandwich-structure" biosensor was coupled with the smartphone "Color Picker" application was used to detect AFB1 with a wide linear range (1-100 ng mL-1) and low detection limit (0.25 ng mL-1). The anti-interference ability of the established biosensor was evaluated by adding different concentrations of standards in corn, peanut, and wheat and matrix effects were 90.84-106.11 %. The results showed that this method demonstrated high specificity, sensitivity, rapidity and low interference in food samples.

Polycarboxyl ionic liquid functionalized Yb-MOFs nanoballs based dual-wavelength responsive photoelectrochemical aptasensor for the simultaneous determination of AFB1 and OTA

Developing an accurate and precise approach for the simultaneous detection of ochratoxin A (OTA) and aflatoxin B1 (AFB1) is significant for food safety surveillance. Herein, a photoelectrochemical sensing platform was constructed based on polycarboxylic ionic liquid functionalized metal-organic framework integrated with gold nanoparticles (Yb-MOFs@AuNPs). Sulfhydryl functionalized hairpin DNA (hDNA) was immobilized on a Yb-MOFs@AuNPs modified glassy carbon electrode (GCE) surface through Au-S bond. After blocking residual active binding sites with BSA, gold nanoparticles-labeled AFB1 aptamer (AuNPs-Apt 1) and gold nanorods-labeled OTA aptamer (AuNRs-Apt 2) were introduced to construct a photoelectrochemical aptasensor for the simultaneous determination of AFB1 and OTA. Due to the surface plasmon resonance effect and the nanometer size effect of gold nanomaterials, the photoelectrochemical aptasensor can output photocurrent responses as being excited with different wavelengths at 520 nm and 808 nm, respectively. When the AFB1 and OTA concentration in the range of 0.001-50.0 ng mL-1, a good linear relationship between the photocurrent difference (ΔI) before and after recognizing targets and the logarithm of AFB1 or OTA concentration was obtained. The detection limits for AFB1 and OTA were 0.40 pg mL-1 and 0.19 pg mL-1, respectively. AFB1 and OTA in corn samples were detected simultaneously by the photoelectrochemical aptasensor.

Bifunctional MOF-Encapsulated Cobalt-Doped Carbon Dots Nanozyme-Powered Chemiluminescence/Fluorescence Dual-Mode Detection of Aflatoxin B1

A novel bifunctional MOF-encapsulated cobalt-doped carbon dots nanozyme (Co-CD/PMOF) with excellent peroxidase-mimic catalytic activity and fluorescence property was synthesized and employed to fabricate a chemiluminescence/fluorescence (CL/FL) dual-mode immunosensor for AFB1 detection. Co-CD/PMOF could catalyze the luminol/H2O2 system to generate robust and long-lasting CL signals due to the slow diffusion effect and continuous generation of •OH, O2•-, and 1O2 species. Differing from traditional flash-type CL emissions, this glow-type CL emission is helpful to fabricate a sensitive and accurate CL sensing platform. Then the CL/FL dual-mode detection of AFB1 was developed using antibody-functionalized Co-CD/PMOF as the signal-amplifying nanoprobe. The CL mode assay based on indirect competitive immune principle was carried out on a chemiluminescence optical fiber platform, where the AFB1-OVA-functionalized optical fiber probe was employed for biorecognition, separation, and signal conducting. The AFB1 detection range and LOD were 0.63-69.36 ng/mL and 0.217 ng/mL, respectively. Using AFB1 antibody-functionalized immunomagnetic beads for capturing and separation, the FL mode detection of AFB1 was established based on the sandwich immune principle. A linear range of 0.54-51.91 ng/mL and a LOD of 0.027 ng/mL were obtained. This work designed a sensitive, rapid, and reliable nanozyme-powered dual-mode assay strategy and provided technical support in the field of environmental monitoring and food safety.

A novel Recjf Exo signal amplification strategy based on bioinformatics-assisted truncated aptamer for efficient fluorescence detection of AFB1

Aflatoxin B1 (AFB1) is a typical mycotoxin that signifacntly endangers public health and economy. In this study, we systematically studied the interaction of aptamers with AFB1 using circular dichroism, molecular dynamics, molecular docking, and fluorescence analysis. The truncated sequence aptamers were screened using molecular docking. We successfully obtained the AFB1 aptamer with higher affinity and its truncated form was enhanced by 5.2-fold compared to the initial AFB1 aptamer. In addition, for rapid detection of AFB1, we designed a fluorescent nano-adaptor sensing platform using RecJf exonuclease signal amplification strategy based on the optimal aptamer. The aptasensor showed satisfactory sensitivity towards AFB1 with a linear detection range of 1-400 ng/mL and a detection limit of 0.57 ng/mL. The aptasensor was successfully applied to the determination of AFB1 in soybean oil and corn oil with recoveries of 91.02 %-106.59 % and 87.39 %-110.61 %, respectively. The successful application of the AFB1 aptasensor, developed through bioinformatics truncation of the aptamer, provides a novel approach to creating a cost-effective, eco-friendly, and rapid aptamer sensing platform.

Strategy of functional nucleic acids-mediated isothermal amplification for detection of foodborne microbial contaminants: A review

Foodborne microbial contamination (FMC) is the leading cause of food poisoning and foodborne illness. The foodborne microbial detection methods based on isothermal amplification have high sensitivity and short detection time, and functional nucleic acids (FNAs) could extend the detectable object of isothermal amplification to mycotoxins. Therefore, the strategy of FNAs-mediated isothermal amplification has been emergingly applied in biosensors for foodborne microbial contaminants detection, making biosensors more sensitive with lower cost and less dependent on nanomaterials for signal output. Here, the mechanism of six isothermal amplification technologies and their application in detecting FMC is firstly introduced. Then the strategy of FNAs-mediated isothermal amplification is systematically discussed from perspectives of FNAs' versatility including recognition elements (Aptamer, DNAzyme), programming tools (DNA tweezer, DNA walker and CRISPR-Cas) and signal units (G-quadruplex, FNAs-based nanomaterials). Finally, challenges and prospects are presented in terms of addressing the issue of nonspecific amplification reaction, developing better FNAs-based sensing elements and eliminating food matrix effects.

Advances in aptamers, and application of mycotoxins detection: A review

Mycotoxin contamination in food products can easily cause serious health hazards and economic losses to human beings. How to accurately detect and effectively control mycotoxin contamination has become a global concern. Mycotoxins conventional detection techniques e.g; ELISA, HPLC, have limitations like, low sensitivity, high cost and time-consuming. Aptamer-based biosensing technology has the advantages of high sensitivity, high specificity, wide linear range, high feasibility, and non-destructiveness, which overcomes the shortcomings of conventional analysis techniques. This review summarizes the sequences of mycotoxin aptamers that have been reported so far. Based on the application of four classic POST-SELEX strategies, it also discusses the bioinformatics-assisted POST-SELEX technology in obtaining optimal aptamers. Furthermore, trends in the study of aptamer sequences and their binding mechanisms to targets is also discussed. The latest examples of aptasensor detection of mycotoxins are classified and summarized in detail. Newly developed dual-signal detection, dual-channel detection, multi-target detection and some types of single-signal detection combined with unique strategies or novel materials in recent years are focused. Finally, the challenges and prospects of aptamer sensors in the detection of mycotoxins are discussed. The development of aptamer biosensing technology provides a new approach with multiple advantages for on-site detection of mycotoxins. Although aptamer biosensing shows great development potential, still some challenges and difficulties are there in practical applications. Future research need high focus on the practical applications of aptasensors and the development of convenient and highly automated aptamers. This may lead to the transition of aptamer biosensing technology from laboratory to commercialization.

A dual-modal biosensor coupling cooperative catalysis strategy for sensitive detection of AFB1 in agri-products

Herein, the cooperative catalysis effect between nanocomposite (AgPd NPs/POD-M/PEI-rGO) and horseradish peroxidase (HRP) was applied for the fast and sensitive detection of aflatoxin B1 (AFB₁). Upon specific and competitive binding of HRP@DNA and AFB₁ to cDNA, the working electrode presented different catalytic capacities for supporting electrolytes (TMB and H₂O₂). In the redox mechanism of TMB and H₂O₂, HRP and nanocomposite effectively catalyzed the oxidization of TMB to form the one-electron oxidation intermediate TMB+, and contributed the electrical signals and absorbance signals. Electrochemistry and colorimetric analyses were successfully realized for AFB₁ detection with 0.2 pg/mL and 8 pg/mL of detection limits, respectively, which is much lower than that of traditional HPLC methods. Overall, this method had significant reliability and sensitivity, offering a promising potential for conveniently evaluating the quality of agri-products polluted with AFB₁. Moreover, this approach provides a new idea for fast and accurate detection of mycotoxin.

A fluorescence aptasensor based on hybridization chain reaction for simultaneous detection of T-2 toxins and zearalenone1

It is extremely necessary to establish a rapid and high-throughput method to detect mycotoxins in food, because grains and cereals are greatly vulnerable to mycotoxins before and after harvest. In this study, we developed a portable aptasensor based on streptavidin magnetic microspheres (MMPs) and hybridization chain reaction (HCR) to simultaneously detect T-2 toxin and zearalenone (ZEN) in corn and oat flour. The MMPs compete with the aptamer for binding, which releases more H0 and triggers HCR with the H1 intermediate modified using 6-FAM and BHQ-1 and the unmodified H2. Subsequently, placing the HCR system corresponding to T-2 and ZEN in a constant-temperature fluorescence detector resulted in well-recovered fluorescence of the HCR products. T-2 and ZEN exhibited good fluorescence response in the dynamic range of 0.001-10 ng mL^-1 and 0.01-100 ng mL^-1 with detection limits of 0.1 pg mL^-1 and 1.2 pg mL^-1, respectively. In addition, this strategy achieved the selective detection of T-2 and ZEN in the spiked corn and oat flour samples. The results are also in good agreement with those obtained using commercial ELISA kits. This developed aptasensor with the characteristics of simple operation and portability has the application potential of establishing sensitive and portable field detection of various mycotoxins.

Plasmonic sensor based on offset-splicing and waist-expanded taper using multicore fiber for detection of Aflatoxins B1 in critical sectors

In this work, authors have developed a portable, sensitive, and quick-response fiber optic sensor that is capable of detection of Aflatoxins B1 (AFB1) quantitatively and qualitatively. Using multi-mode fiber (MMF) and multi-core fiber (MCF), the MMF-MCF-MCF-MMF fiber structure based on symmetric transverse offset splicing and waist-expanded taper is fabricated. The evanescent waves are enhanced to form a strong evanescent field by etching the fiber surface with hydrofluoric acid. To successfully excite the localized surface plasmon resonance phenomenon, gold nanoparticles are deposited on the optical fiber probe's surface. Further, to modify the fiber optic probes, Niobium carbide (Nb₂CT_x) MXene and AFB1 antibodies are functionalized. Nb₂CT_x MXene is employed to strengthen the biocompatibility of the sensor and increase the specific surface area of the fiber probe, while AFB1 antibody is used to identify AFB1 micro-biomolecules in a specific manner. The reproducibility, reusability, stability, and selectivity of the proposed fiber probe are tested and validated using various concentration of AFB1 solutions. Finally, the linear range, sensitivity, and limit of detection of the sensing probe are determined as 0 - 1000 nM, 11.7 nm/µM, and 26.41 nM, respectively. The sensor offers an indispensable technique, low-cost solution and portability for AFB1-specific detection in agricultural products and their byproducts with its novel optical fiber structure and superior detecting capability. It is also useful for marine species like fish and consequently affecting health of human body.

A highly sensitive competitive aptasensor for AFB1 detection based on an exonuclease-assisted target recycling amplification strategy

Aflatoxin B₁ (AFB₁) is a typical mycotoxin found in agricultural products, and poses a huge threat to both humans and animals. Accurate and rapid measurement of AFB₁ is essential for environmental analysis and food safety. Based on molecular docking simulation design and exonuclease-assisted target recycling amplification, we designed a competitive fluorescence aptasensor to detect AFB₁ rapidly and sensitively. According to the molecular docking simulations, a complementary strand (cDNA) was designed by searching for potential binding sites of the aptamer, which had the lowest binding energy. Magnetic beads modified with biotin-Apt were used as the capture probe, while FAM-labeled cDNA acted as the reporter probe. By using EXO I for target recycling amplification, this aptasensor was highly sensitive and selective for AFB₁. The detection limit of the suggested aptasensor under optimal conditions was 0.36 ng mL^-1 (S/N = 3) in the range of 1-1000 ng mL^-1 (R² = 0.991). The developed aptasensor was successfully used to analyze AFB₁ in oil samples.

Chromatographic methods for rapid aflatoxin B1 analysis in food: a review

Aflatoxin B1 (AFB1) is a mycotoxin and is the most carcinogenic of all known chemicals. In view of the AFB1 characteristics of widespread distribution, serious pollution, great harm to humans, and animals and difficult to remove, it is urgent to develop a convenient and sensitive detection method. Moreover, chromatographic test strips (CTSs) are a rapid detection technology that combines labeling technology with chromatography technology. CTSs have been widely used in the fields of environmental monitoring, medical diagnosis, and food safety analysis in recent years. Different from other immune assays, they have the advantages of short measuring time, low cost, high efficiency and no need for professionals to operate. In addition, the introduction of nanomaterials has laid a good foundation for the detection of high sensitivity, high specificity and high efficiency via CTSs. Herein, we tend to comprehensively introduce the applications of chromatographic methods in AFB1 detection and pay attention to the signal detection modes based on nanomaterials in antibody-based immunochromatographic strips (ICSs), such as colorimetric, fluorescent, chemiluminescent, and Raman scattering sensing. Some typical examples are also listed in this review. In the end, we make a summary and put forward prospects for the development of CTSs.

Carboxyl porphyrin as signal molecule for sensitive fluorescent detection of aflatoxin B1 via ARGET-ATRP

In this work, a novel fluorescent biosensor for sensitive detecting of aflatoxin B₁ (AFB₁) was constructed through activators regenerated by electron transfer for atom transfer radical polymerization (ARGET-ATRP) for the first time. The AFB₁ antigen was immobilized on the carboxy magnetic beads (MBs) by forming a sandwich-type "aptamer-antigen-antibody" immune system. Then, acrylamid (AM) was introduced through ARGET-ATRP to provide binding sites for the signaling molecules. Finally, carboxy porphyrins (TPP*) were connected with monomers through an amide bond and fixed on the MBs. Under the optimal experimental conditions, the fluorescence intensity and the logarithm of the concentration of AFB₁ showed a good relationship from 100 fg mL^-1 to 100 ng mL^-1, with the limit of detection (LOD) as low as 8.38 fg mL^-1. In addition, the method shows good selectivity and excellent reproducibility. More importantly, the biosensor has applied to the quantitative analysis of AFB₁ in four Chinese medicines, and this strategy could potentially serve as a novel means for sensitive detecting of AFB₁ in complex matrices.

Advances in functional photonic crystal materials for the analysis of chemical hazards in food

Chemical contaminants in food generally include natural toxins (mycotoxins, animal toxins, and phytotoxins), pesticides, veterinary drugs, environmental pollutants, heavy metals, and illegal additives. Developing a low-cost, simple, and rapid detection technology for harmful substances in food is urgently needed. Analytical methods based on different advanced materials have been developed into rapid detection methods for food samples. In particular, photonic crystal (PC) materials have a unique surface periodic structure, structural color, a large surface area, easy integration with photoelectronic and magnetic devices which have great advantages in the development of rapid, low-cost, and highly sensitive analytical methods. This review focuses on the PC materials in the view of their fabrication processes, functionalized recognition components for the specific recognition of hazardous substances, and applications in the separation, enrichment, and detection of chemical hazards in real samples. Suspension array based on three-dimensional PC microspheres by droplet-based microfluidic assembly is a great promising and powerful platform for food safety detection fields. For the PCs selective analysis, biological antibodies, aptamers, and molecularly imprinted polymers (MIPs) could be modified for specific recognition of target substances, particularly MIPs because of their low-cost and easy mass production. Based on these functional PCs, various toxic and hazardous substances can be selectively enriched or recognized in real samples and further quantified in combination of liquid chromatography method or optical detection methods including fluorescence, chemiluminescence, and Raman spectroscopy.

Derivatization-free determination of carbonyl compounds using bifunctional chemiluminescence coreactant thiourea dioxide

Uniquely, thiourea dioxide not only can reduce carbonyl compounds but also generate an oxidant to trigger luminol chemiluminescence. Herein, derivatization-free carbonyl compound detection using bifunctional chemiluminescence coreactant thiourea dioxide has been developed for the first time with the second most crucial flavor benzaldehyde as a representative.

Dual-Target Electrochemical Sensor Based on 3D MoS2-rGO and Aptamer Functionalized Probes for Simultaneous Detection of Mycotoxins

A dual-target aptamer functionalized probes (DTAFP) was applied for the detection of aflatoxin B1 (AFB1) and zearalenone (ZEN) simultaneously, which has not been reported. Meanwhile, two functional materials for signal amplification of the DTAFP were synthesized: 1) a three-dimensional molybdenum disulfide-reduced graphene oxide (MoS₂-rGO) as a favorable loading interface; 2) a double-probes gold nanoparticles (AuNPs) modified by Thionin (Thi) and 6-(Ferrocenyl) hexanethiol (FC6S) as distinguishable and non-interfering signals. Mycotoxins on the electrode surface release into solution under the function of the DTAFP, leading a reduction of the differential peak impulse in signal response. Under the optimum conditions, the aptasensor exhibited a detection range of 1.0 pg mL⁻¹–100 ng mL⁻¹ for AFB1 and ZEN, with no observable cross reactivity. In addition, the aptasensor performed excellent stability, reproducibility, specificity, and favorable recovery in the detection of edible oil. This work demonstrated a novel method for the construction of a simple, rapid, and sensitive aptasensor in the detection of multiple mycotoxins simultaneously.

Highly-sensitive and simple fluorescent aptasensor for 17 b-estradiol detection coupled with HCR-HRP structure

As an important kind of environmental endocrine disruptors, 17 β -Estradiol (E2) plays a major role in affecting the growth of human including sexual characters, pregnancy system, etc. In the modern society, with the threat of abuse in breeding, it is imperative to design sensitive methods for detecting low concentration of E2 in environment. In this work, we constructed a highly sensitive and simple fluorescent aptasenor for detecting E2 via amplification of hybridization chain reaction (HCR) and horseradish peroxidase (HRP). Through the competitions between complementary strand (cmDNA) and E2 to E2 aptamer modified on magnetic beads, the unbound cmDNA would be collected and captured by polystyrene microspheres to induce HCR which brought abundant biotin sites. Subsequently, benefit from the excellent catalytic performance of streptavidin-horseradish peroxidase (SA-HRP), the highly sensitive fluorescence signals could be obtained in low concentration of E2. Under the optimal conditions, the prospered method for E2 detection was shown a good liner range from 1 to 100 pg/mL, with the lower detecting limit of 0.2 pg/mL compared with previous work. In addition, the recovery rates tested in the real samples of milk and water were 99.20%-108.06% and 91.07%-106.13%. In all, the assay may provide a perspective way for highly sensitive detection for various contaminants in the real samples.

Label-free ratiometric homogeneous electrochemical aptasensor based on hybridization chain reaction for facile and rapid detection of aflatoxin B1 in cereal crops

Aflatoxin B1 (AFB1) contamination has raised global concerns in agricultural and food industry; thus, sensitive, accurate and rapid AFB1 sensors are essential in many circumstances. Herein, we developed a label-free and immobilization-free ratiometric homogeneous electrochemical aptasensor based on hybridization chain reaction (HCR) for facile and rapid determination of AFB1. Methylene blue (MB) and ferrocene (Fc) were used as label-free probes to produce a response signal (I_MB) and a reference signal (I_Fc) in solution phase, respectively. The ratio of I_MB/I_Fc was used as a yardstick to quantify AFB1. HCR was exploited to enlarge the intensity of I_MB as well as ratiometric signal. By combining label-free homogeneous assay and ratiometric strategy, the resulting aptasensor offered sensitive, rapid, and reliable determinations of AFB1 with a detection limit of 38.8 pg mL^-1. The aptasensor was then used to determine AFB1 in cereal samples with comparable reliability as HPLC-MS.

Graphene Quantum Dot-Based Optical Sensing Platform for Aflatoxin B1 Detection via the Resonance Energy Transfer Phenomenon

An optical sensing platform for the detection of an important mycotoxin, aflatoxin B1 (AFB1), in the absence of a bioactive environment is explored. In this work, a fluorescence-based sensing technique was designed by combining graphene quantum dots (GQDs) and AFB1 via fluorescence quenching, where AFB1 acts as the quencher of GQD fluorescence. GQDs were synthesized through a single-step hydrothermal reaction from the leaves of "curry tree" (Murraya Koenigii) at 200 °C. The fluorescent GQDs were quenched by AFB1 (quencher), which itself is detecting the analyte. Hence, this study reports the direct sensing of the mycotoxin AFB1 without the involvement of inhibitors or biological entities. The possible mode of quenching is the nonradiative resonance energy transfer between the GQDs and the AFB1 molecules. This innovative sensor could detect AFB1 in the range from 5 to 800 ng mL^-1 with a detection limit of 0.158 ng mL^-1. The interferent study was also carried out in the presence of different mycotoxins and carbohydrates (d-fructose, cellulose, and starch), which demonstrated the high selectivity and robustness of the sensor in the complex sample matrix. The recovery percentage of the spiked samples was also calculated to be up to 106.8%. Thus, this study reports the first GQD based optical sensor for AFB1.

Recent Progress in Rapid Determination of Mycotoxins Based on Emerging Biorecognition Molecules: A Review

Mycotoxins are secondary metabolites produced by fungal species, which pose significant risk to humans and livestock. The mycotoxins which are produced from Aspergillus, Penicillium, and Fusarium are considered most important and therefore regulated in food- and feedstuffs. Analyses are predominantly performed by official laboratory methods in centralized labs by expert technicians. There is an urgent demand for new low-cost, easy-to-use, and portable analytical devices for rapid on-site determination. Most significant advances were realized in the field bioanalytical techniques based on molecular recognition. This review aims to discuss recent progress in the generation of native biomolecules and new bioinspired materials towards mycotoxins for the development of reliable bioreceptor-based analytical methods. After brief presentation of basic knowledge regarding characteristics of most important mycotoxins, the generation, benefits, and limitations of present and emerging biorecognition molecules, such as polyclonal (pAb), monoclonal (mAb), recombinant antibodies (rAb), aptamers, short peptides, and molecularly imprinted polymers (MIPs), are discussed. Hereinafter, the use of binders in different areas of application, including sample preparation, microplate- and tube-based assays, lateral flow devices, and biosensors, is highlighted. Special focus, on a global scale, is placed on commercial availability of single receptor molecules, test-kits, and biosensor platforms using multiplexed bead-based suspension assays and planar biochip arrays. Future outlook is given with special emphasis on new challenges, such as increasing use of rAb based on synthetic and naïve antibody libraries to renounce animal immunization, multiple-analyte test-kits and high-throughput multiplexing, and determination of masked mycotoxins, including stereoisomeric degradation products.

Applications of hybridization chain reaction optical detection incorporating nanomaterials: A review

The development of powerful, simple and cost-effective signal amplifiers has significant implications for biological research and analysis. Hybridization chain reaction (HCR) has attracted increasing attention because of its enzyme-free, simple, and efficient amplification. In the HCR process, an initiator probe triggered a pair of metastable hairpins through a cross-opening process to propagate a chain reaction of hybridization events, yielding a long-nicked double-stranded nucleic acid structure. To achieve more noticeable signal amplification, nanomaterials, including graphene oxide, quantum dots, gold, silver, magnetic, and other nanoparticles, were integrated with HCR. Various types of colorimetric, fluorescence, plasmonic analyses or chemiluminescence optical sensing strategies incorporating nanomaterials have been developed to analyze various targets, such as nucleic acids, small biomolecules, proteins, and metal ions. This review summarized the recent advances of HCR technology pairing diverse nanomaterials in optical detection and discussed their challenges.

Recent progress in fluorescent aptasensors for the detection of aflatoxin B1 in food

Aflatoxin B1 pollution is one of the most critical issues of food safety and has been categorized as a group I carcinogen by the International Agency for Research on Cancer. Aflatoxin B1 exists in various foods and feedstuff products and can be produced and contaminate food products in all processes, including growth, harvest, storage, or processing. Therefore, it is of great value for detecting and on-site monitoring aflatoxin B1. Aptamers are short single-stranded DNA or RNA obtained from the nucleic acid molecular library through SELEX. With advantages of high specificity, large affinity, and easy modification, aptasensors have become popular in a wide range of promising applications. This review focuses on recent advances on fluorescent aptamer sensors for the detection of aflatoxin B1, including their design strategies, working mechanisms, and applications to on-site detection. Finally, the current challenges and prospects are discussed.

Aptasensors for mycotoxins in foods: Recent advances and future trends

Mycotoxin contamination in foods has posed serious threat to public health and raised worldwide concern. The development of simple, rapid, facile, and cost-effective methods for mycotoxin detection is of urgent need. Aptamer-based sensors, abbreviated as aptasensors, with excellent recognition capacity to a wide variety of mycotoxins have attracted ever-increasing interest of researchers because of their simple fabrication, rapid response, high sensitivity, low cost, and easy adaptability for in situ measurement. The past few decades have witnessed the rapid advances of aptasensors for mycotoxin detection in foods. Therefore, this review first summarizes the reported aptamer sequences specific for mycotoxins. Then, the recent 5-year advancements in various newly developed aptasensors, which, according to the signal output mode, are divided into electrochemical, optical and photoelectrochemical categories, for mycotoxin detection are comprehensively discussed. A special attention is taken on their strengths and limitations in real-world application. Finally, the current challenges and future perspectives for developing novel highly reliable aptasensors for mycotoxin detection are highlighted, which is expected to provide powerful references for their thorough research and extended applications. Owing to their unique advantages, aptasensors display a fascinating prospect in food field for safety inspection and risk assessment.

Validation of I'screen AFLA M1 Milk for Detection of Aflatoxin M1 in Raw Bovine Milk and Powdered Milk: AOAC Performance Tested MethodSM 072002

BACKGROUND

Aflatoxin M1 (AFM1) is the major metabolite of Aflatoxin B1 (AFB1) and can be found in the milk of animals fed with feed containing AFB1. The frequency of occurrence of AFM1 in milk has led to the development of specific quantitative methods of analysis to mitigate the risk of adversely affecting human health.

OBJECTIVE

To demonstrate that the I'screen AFLA M1 Milk ELISA kit can quantify AFM1 in raw bovine milk and powdered milk.

METHOD

Assay performance was evaluated studying lot-to-lot consistency, assay stability, robustness, and possible interferences of related molecules. Raw bovine milk samples spiked at 0, 5.0, 20, 50, 100, and 200 ng/L of AFM1 and powdered milk reference materials and spiked samples at 100 and 200 ng/L were tested to determine recovery, repeatability, and bias. LOD and LOQ were also determined for both matrices.

RESULTS

High selectivity for AFM1 was demonstrated and performances were consistent, robust, and stable. The LOQ was validated at 5 ng/L for raw milk and 50 ng/L for powdered milk. Recoveries for spiked raw and powdered milk were 97-122%, with RSDr < 10%, and 106-111% for reference materials, with RSDr < 5%.

CONCLUSIONS

The data collected validate the method as a selective, specific, sensitive, accurate, and precise tool for the analysis of AFM1 in raw bovine milk and powdered milk.

HIGHLIGHTS

We demonstrated that I'screen AFLA M1 is a reliable kit and a proper screening tool suitable for high analytical throughputs.

Luminescence method for detection of aflatoxin B1 using ATP-releasing nucleotides

Determination of aflatoxin B1 (AFB1) is still a big issue in food safety. In this paper, we developed a luminescence AFB1 detection method combined with ATP-releasing nucleotides (ARNs) and AFB1 aptamer. Firstly, using a new coupling method, we synthesized two ARNs (dTP₄A and dGP₄A) in a yield of 67% and 58%, respectively. The newly prepared ARNs show a much lower background. Then, we developed a new isothermal polymerase amplification method. In this method, two DNA hairpins were used to substitute the circle DNA template in rolling circle amplification. Using this amplification method and combined with AFB1 aptamer, a new AFB1 detection method is developed. A detection limit as low as 0.3 pM is achieved. This method is simple and efficient, and will have a great potential to be used for food safety and public health.

Schematic illustration of a luminescence short DNA sequence detection method using ATP-releasing nucleotides. Combined with AFB1 aptamer, this method is used to detect AFB1.

Quantitative detection of aflatoxin B1 using quantum dots-based immunoassay in a recyclable gravity-driven microfluidic chip

To achieve rapid and sensitive detection of aflatoxin B₁ (AFB₁), we developed a polydimethylsiloxane gravity-driven cyclic microfluidic chip using the two-signal mode strategy. The structural design of the chip, together with the two-wavelength quantum dot ratio fluorescence, effectively eliminates the influence of environmental factors, improves the signal stability, and ensures that the final detection result positively correlates with the target concentration. Moreover, the theoretical analysis performed for the established physical model of the three-dimensional reaction interface inside the chip confirmed the improved reaction rate of immune adsorption in the microfluidic strategy. Overall, the method exhibited a wide analytic range (0.2-500 ng mL^-1), low detection limit (0.06 ng mL^-1), high specificity, good precision (coefficient of variation < 5%), excellent reusability (20 times, 89.1%) and satisfactory practical sample analysis capacity. Furthermore, the reusability and designability of this chip provide a reliable scheme for field detection of AFB₁, analysis of other small molecules, and establishment of high-throughput detection systems under different conditions.

Interaction between the functionalized probes: The depressed efficiency of dual-amplification strategy on ratiometric electrochemical aptasensor for aflatoxin B1

Signal amplification is one of the most effective ways to develop the high-performance electrochemical sensors. However, it can be more complicated for ratiometric detections. Herein, a ratiometric electrochemical aptasensor for aflatoxin B1 (AFB1) was proposed by taking advantage of a dual-amplification strategy by coupling of DNA walker (DW) with hybridization chain reaction (HCR). The special binding of AFB1 with ferrocene (Fc)-labelled aptamer triggers DW on hairpin DNA (hDNA) tracks to produce abundant double-stranded DNA (dsDNA). HCR-based strand amplification occurs on these dsDNA to absorb more methylene blue (MB). Then current ratio of MB (I_MB) and Fc (I_Fc) is designed as a yardstick to detect AFB1. Our experiments reveal that the interaction between Fc and MB (i.e., steric hindrance, electron mediator) varies. In addition to steric hindrance, the presence of MB also acts as electron mediator, thereby facilitating the electron transfer between Fc and electrode. Such combined effect consequently depresses the efficiency of dual-amplification strategy to improve the detection. The developed ratiometric electrochemical aptasensor allows the accurate detection of AFB1 in the 0.003-3 pg mL^-1 range. Our work has shed light on the amplification strategy for ratiometric sensing, and provided a new route in integrating different amplification strategies.

Aptasensors for mycotoxin detection: A review

Mycotoxins are toxic compounds produced by fungi, which represent a risk to the food and feed supply chain, having an impact on health and economies. A high percentage of feed samples have been reported to be contaminated with more than one type of mycotoxin. Systematic, cost-effective and simple tools for testing are critical to achieve a rapid and accurate screening of food and feed quality. In this review, we describe the various aptamers that have been selected against mycotoxins and their incorporation into optical and electrochemical aptasensors, outlining the strategies exploited, highlighting the advantages and disadvantages of each approach. The review also discusses the different materials used and the immobilization methods employed, with the aim of achieving the highest sensitivity and selectivity.

A Flexible PI/Si/SiO2 Piezoresistive Microcantilever for Trace-Level Detection of Aflatoxin B1

In this paper, a polyimide (PI)/Si/SiO2-based piezoresistive microcantilever biosensor was developed to achieve a trace level detection for aflatoxin B1. To take advantage of both the high piezoresistance coefficient of single-crystal silicon and the small spring constant of PI, the flexible piezoresistive microcantilever was designed using the buried oxide (BOX) layer of a silicon-on-insulator (SOI) wafer as a bottom passivation layer, the topmost single-crystal silicon layer as a piezoresistor layer, and a thin PI film as a top passivation layer. To obtain higher sensitivity and output voltage stability, four identical piezoresistors, two of which were located in the substrate and two integrated in the microcantilevers, were composed of a quarter-bridge configuration wheatstone bridge. The fabricated PI/Si/SiO2 microcantilever showed good mechanical properties with a spring constant of 21.31 nN/μm and a deflection sensitivity of 3.54 × 10-7 nm-1. The microcantilever biosensor also showed a stable voltage output in the Phosphate Buffered Saline (PBS) buffer with a fluctuation less than 1 μV @ 3 V. By functionalizing anti-aflatoxin B1 on the sensing piezoresistive microcantilever with a biotin avidin system (BAS), a linear aflatoxin B1 detection concentration resulting from 1 ng/mL to 100 ng/mL was obtained, and the toxic molecule detection also showed good specificity. The experimental results indicate that the PI/Si/SiO2 flexible piezoresistive microcantilever biosensor has excellent abilities in trace-level and specific detections of aflatoxin B1 and other biomolecules.

Aptasensors for lysozyme detection: Recent advances

Lysozyme is an enzyme existing in multiple organisms where it plays various vital roles. The most important role is its antibacterial activity in the human body; in fact, it is also called "the body's own antibiotic". Despite its proven utility, lysozyme can potentially trigger allergic reactions in sensitive individuals, even in trace amounts. Therefore, lysozyme determination in foods is becoming of paramount importance. Traditional detection methods are expensive, time-consuming and they cannot be applied for fast in-situ quantification. Electrochemical and optical sensors have attracted an increasing attention due to their versatility and ability to reduce the disadvantages of traditional methods. Using an aptamer as the bioreceptor, the sensor selectivity is amplified due to the specific recognition of the analyte. This review is presenting the progresses made in lysozyme determination by means of electrochemical and optical aptasensors in the last five years. A critical overview on the methodologies employed for aptamer immobilization and on the strategies for signal amplification of the assays will be described. Different optical and electrochemical aptasensors will be discussed and compared in terms of analytical performances, versatility and real samples applications.

Aptamers used for biosensors and targeted therapy

Aptamers are single-stranded nucleic acid sequences that can bind to target molecules with high selectivity and affinity. Most aptamers are screened in vitro by a combinatorial biology technique called systematic evolution of ligands by exponential enrichment (SELEX). Since aptamers were discovered in the 1990s, they have attracted considerable attention and have been widely used in many fields owing to their unique advantages. In this review, we present an overview of the advancements made in aptamers used for biosensors and targeted therapy. For the former, we will discuss multiple aptamer-based biosensors with different principles detected by various signaling methods. For the latter, we will focus on aptamer-based targeted therapy using aptamers as both biotechnological tools for targeted drug delivery and as targeted therapeutic agents. Finally, challenges and new perspectives associated with these two regions were further discussed. We hope that this review will help researchers interested in aptamer-related biosensing and targeted therapy research.

Recent Advances in Aflatoxins Detection Based on Nanomaterials

Aflatoxins are the secondary metabolites of Aspergillus flavus and Aspergillus parasiticus and are highly toxic and carcinogenic, teratogenic and mutagenic. Ingestion of crops and food contaminated by aflatoxins causes extremely serious harm to human and animal health. Therefore, there is an urgent need for a selective, sensitive and simple method for the determination of aflatoxins. Due to their high performance and multipurpose characteristics, nanomaterials have been developed and applied to the monitoring of various targets, overcoming the limitations of traditional methods, which include process complexity, time-consuming and laborious methodologies and the need for expensive instruments. At the same time, nanomaterials provide general promise for the detection of aflatoxins with high sensitivity, selectivity and simplicity. This review provides an overview of recent developments in nanomaterials employed for the detection of aflatoxins. The basic aspects of aflatoxin toxicity and the significance of aflatoxin detection are also reviewed. In addition, the development of different biosensors and nanomaterials for aflatoxin detection is introduced. The current capabilities and limitations and future challenges in aflatoxin detection and analysis are also addressed.

Novel electrochemiluminescence solid-state pH sensor based on an i-motif forming sequence and rolling circle amplification

Based on a pH-dependent i-motif forming sequence and rolling circle amplification (RCA) strategy, a novel electrochemiluminescence (ECL) solid-state pH sensor was proposed herein. The sensor showed a wide dynamic response range from pH 4 to 7.4. Furthermore, our sensor could be used to determine glucose, demonstrating its practical applicability.

Highly sensitive and selective aflatoxin B1 biosensor based on Exonuclease I-catalyzed target recycling amplification and targeted response aptamer-crosslinked hydrogel using electronic balances as a readout

The biosensors based on aptamer based stimuli-responsive hydrogels have the characters of high specificity, good stability, portability. Electronic balance is one of the most accurate equipment and can be reached nearly in all labs. Aflatoxin B₁ (AFB₁) is highly toxic and carcinogenic to humans and animals, it is necessary to develop simple and convenient detection method to apply in resource limited area. In this study, a novel strategy for quantitative detection of AFB₁ has been developed by combining the high selectivity and convenient of target-responsive hydrogel and the simple of using electronic balance as readout devices. The AFB₁ target responsive double crosslinked hydrogel has been constructed using linear hyaluronic acid grafted single-stranded DNA complex as the backbone, AFB₁ aptamer and polyethyleneimine as crosslinkers. And platinum nanoparticles (PtNPs) had been embedded in the hydrogel firstly. The present of AFB₁ can bind with the aptamer with high affinity and cause the releasing of aptamer from hydrogel. The addition of Exo I can specifically recognize and cleave the aptamer in AFB₁-aptamer complex, resulting in the releasing of AFB₁, which can react with the hydrogel again, thereby achieving the target cycle. By this means, the hydrogel will collapse and many pre-embedded PtNPs can be released. The transferring of the released PtNPs to a drainage device which contains H₂O₂ can results in the increasing of the internal pressure since the production of oxygen through the catalytic decomposition of H₂O₂ by PtNPs has low solubility. Which will cause the discharging of water from the system and this can be collected and weighed by an electronic balance easily. The weight of water has a linear relationship with AFB₁ concentration. Under 30 min catalytic time, the linear range is 31.2 μg/kg - 6.2 mg/kg with the detection limit of 9.4 μg/kg (S/N = 3). The proposed method was successfully applied to the detection of AFB₁ in peanut samples.

Aptamer-Based Biosensor for Detection of Mycotoxins

Mycotoxins are a large type of secondary metabolites produced by fungi that pose a great hazard to and cause toxic reactions in humans and animals. A majority of countries and regulators, such as the European Union, have established a series of requirements for their use, and they have also set maximum tolerance levels. The development of high sensitivity and a specific analytical platform for mycotoxins is much in demand to address new challenges for food safety worldwide. Due to the superiority of simple, rapid, and low-cost characteristics, aptamer-based biosensors have successfully been developed for the detection of various mycotoxins with high sensitivity and selectivity compared with traditional instrumental methods and immunological approaches. In this article, we discuss and analyze the development of aptasensors for mycotoxins determination in food and agricultural products over the last 11 years and cover the literatures from the first report in 2008 until the present time. In addition, challenges and future trends for the selection of aptamers toward various mycotoxins and aptasensors for multi-mycotoxins analyses are summarized. Given the promising development and potential application of aptasensors, future research studies made will witness the great practicality of using aptamer-based biosensors within the field of food safety.

Competitive electrochemical aptasensor based on a cDNA-ferrocene/MXene probe for detection of breast cancer marker Mucin1

A competitive electrochemical aptasensor based on a cDNA-ferrocene/MXene probe is used to detect the breast cancer marker Mucin1 (MUC1). MXene (Ti₃C₂) nanosheets with excellent electrical conductivity and large specific surface area are selected as carriers for aptamer probes. The ferrocene-labeled complementary DNA (cDNA-Fc) is first bound on the surface of MXene to form a cDNA-Fc/MXene probe. Then, the MUC1 aptamer is fixed to the electrode by Au-S bonds. The sensing electrode is named Apt/Au/GCE. After the probe is complementary to the aptamer, a cDNA-Fc/MXene/Apt/Au/GCE aptasensor is fabricated. When the aptasensor is used for detection of MUC1, a competitive process happens between the cDNA-ferrocene/MXene probe and MUC1, which makes cDNA-Fc/MXene probe detach from the sensing electrode, resulting in a decrease in electrical signal. The difference in the corresponding peak current before and after the competition can be used to indicate the quantitative change in bound MUC1. The proposed competitive electrochemical aptasensor gives a wide linear range of 1.0 pM-10 μM and a low detection limit of 0.33 pM (S/N = 3), which is promising for clinical diagnosis.

A simple aptamer-based fluorescent aflatoxin B1 sensor using humic acid as quencher

This work described a fluorometric and aptamer-based assay for aflatoxin B1 (AFB1). Aptamer-modified carbon dots (DNA-CDs) were first synthesized as fluorescence probes, then reacted with humic acid (HAs) which acted as quencher of the blue fluorescence of the CDs. It was found that HAs can readily adsorb ssDNA aptamers due to the presence of a rich surface chemistry (quinoidal units, aromatic rings and sugar moieties). This resulted in quenching of the fluorescence of the CDs (with excitation/emission peaks at 360/450 nm), probably due to π interactions. If the nanoprobe was reacted with AFB1, the DNA-CDs detached from the HAs and fluorescence was restored. Under optimized experimental conditions, the assay had a linear response in the 0.1-0.8 ng mL^-1 AFB1 concentration range, with a low limit of detection of 70 pg mL^-1.

A highly sensitive and low-background fluorescence assay for pesticides residues based on hybridization chain reaction amplification assisted by magnetic separation

Due to the concern over food safety, it is important to detect the pesticides residues in agricultural products. Here, a highly sensitive and low background fluorescent strategy for the detection of pesticides residues has been developed. The fluorescence intensity of N-methyl mesoporphyrin IX (NMM) binding G-quadruplex could be turn off because of inhibiting effect of the pesticides on the acetylcholinesterase (AChE) activity. For that, four single-stranded DNAs (named linker, trigger, H1 and H2, respectively) are rational designed and T-Hg-T mismatches duplex DNAs as a recognizer combined with the separation of magnetic beads. The design of hybridization chain reaction (HCR) amplification strategy assisted by magnetic separation has been adopted to improve the detection sensitivity. In the presence of pesticides, the amount of the thiol group generated by hydrolysis reaction of acetylcholine (ACh) is reduced, lead to release of less trigger DNA. Therefor subsequent HCR process is retarded with decreased fluorescence intensity. The reduced fluorescence intensity has a quantitative relationship with the pesticide concentration. The limit of detection of chlorpyrifos was estimated to be 2.0 ng ml-1. It has been applied to detect the pesticides residues in real samples.