Intramolecular isopeptide bonds: protein crosslinks built for stress?

Design of Cell-Penetrating Domain Antibodies via a Genetically Encoded β-Lactam Amino Acid

Domain antibodies such as monobodies provide an attractive immunoglobin fold for evolving high-affinity protein binders targeting the intracellular proteins implicated in cell signalling. However, it remains a challenge to endow cell permeability to these small and versatile protein binders. Here, we report a streamlined approach combining orthogonal crosslinking afforded by a genetically encoded β-lactam-lysine (BeLaK) and genetic supercharging to generate cell-penetrating monobodies. When introduced to the N-terminal β-strand of a series of supercharged monobodies, BeLaK enabled efficient inter-strand crosslinking with the neighbouring lysine. Compared to its non-crosslinked counterpart, a BeLaK-crosslinked, +18-charged monobody exhibited enhanced thermostability and greater cellular uptake at 40 nM. Moreover, this structurally rigidified, supercharged monobody inhibited ERK1/2 phosphorylation in KYSE-520 esophageal cancer cell line at sub-micromolar concentration, indicating significant endosomal escape after endocytosis. Together, the discovery of this BeLaK-encoded, rigidified immunoglobin fold should facilitate the design of cell-penetrating monobodies targeting intracellular signalling proteins.

Enabling simultaneous photoluminescence spectroscopy and X-ray footprinting mass spectrometry to study protein conformation and interactions

X-ray footprinting mass spectrometry (XFMS) is a structural biology method that uses broadband X-rays for in situ hydroxyl radical labeling to map protein interactions and conformation in solution. However, while XFMS alone provides important structural information on biomolecules, as we move into the era of the interactome, hybrid methods are becoming increasingly necessary to gain a comprehensive understanding of protein complexes and interactions. Toward this end, we report the development of the first synergetic application of inline and real-time fluorescent spectroscopy at the Advanced Light Source's XFMS facility to study local protein interactions and global conformational changes simultaneously. To facilitate general use, we designed a flexible and optimum system for producing high-quality spectroscopy-XFMS hybrid data, with rapid interchangeable liquid jet or capillary sample delivery for multimodal inline spectroscopy, and several choices for optofluidic environments. To validate the hybrid system, we used the covalently interacting SpyCatcher-SpyTag split protein system. We show that our hybrid system can be used to detect the interaction of SpyTag and SpyCatcher via fluorescence resonance energy transfer (FRET), while elucidating key structural features throughout the complex at the residue level via XFMS. Our results highlight the usefulness of hybrid method in providing binding and structural details to precisely engineer protein interactions.

Type IV pili-associated secretion of a biofilm matrix protein from Clostridium perfringens that forms intermolecular isopeptide bonds

Clostridium perfringens is a Gram-positive anaerobic spore-forming bacterial pathogen of humans and animals. C. perfringens also produces type IV pili (T4P) and has two complete sets of T4P-associated genes, one of which has been shown to produce surface pili needed for cell adherence. One hypothesis about the role of the other set of T4P genes is that they could comprise a system analogous to the type II secretion systems (TTSS) found in Gram-negative bacteria, which is used to export folded proteins from the periplasm through the outer membrane to the extracellular environment. Gram-positive bacteria have a similar secretion barrier in the thick peptidoglycan (PG) layer, which blocks secretion of folded proteins >25 kD. To determine if the T4P-associated genes comprise a Gram-positive TTSS, the secretome of mutants lacking type IV pilins were examined and a single protein, a von Willebrand A domain containing protein BsaC (CPE0517) was identified as being dependent on PilA3 for secretion. BsaC is in an operon with a signal peptidase and two putative biofilm matrix proteins with homology to Bacillus subtilis TasA. One of these proteins, BsaA, was shown by another group to produce high mol wt oligomers. We analyzed BsaA monomer interactions with de novo modeling, which projected that the monomers formed isopeptide bonds as part of a donor strand exchange process. Mutations in residues predicted to form the isopeptide bonds led to loss of oligomerization, supporting the predicted bond formation process. Phylogenetic analysis showed the BsaA family of proteins are widespread among bacteria and archaea but only a subset are predicted to form isopeptide bonds.

Importance

For bacteria to secrete folded proteins to the environment, they have to overcome the physical barriers of an outer membrane in Gram-negative bacteria and the thick peptidoglycan layer in Gram-positive bacteria. One mechanism to do this is the use of a Type II secretion system in Gram-negative bacteria, which has a similar structure as type IV pili and is modeled to act as a piston that pumps folded proteins through the outer membrane to the environment. Clostridium perfringens , like all or most all of the clostridia, has type IV pili and, in fact, has two sets of pilus-associated genes. Here we present evidence that C. perfringens uses one set of pilus genes to secrete a biofilm associated protein and may be responsible for secreting the main biofilm protein BsaA. We show that BsaA monomers are, unlike most other biofilm matrix proteins, linked by intermolecular isopeptide bonds, enhancing the physical strength of BsaA fibers.

Biospecific Chemistry for Covalent Linking of Biomacromolecules

Interactions among biomacromolecules, predominantly noncovalent, underpin biological processes. However, recent advancements in biospecific chemistry have enabled the creation of specific covalent bonds between biomolecules, both in vitro and in vivo. This Review traces the evolution of biospecific chemistry in proteins, emphasizing the role of genetically encoded latent bioreactive amino acids. These amino acids react selectively with adjacent natural groups through proximity-enabled bioreactivity, enabling targeted covalent linkages. We explore various latent bioreactive amino acids designed to target different protein residues, ribonucleic acids, and carbohydrates. We then discuss how these novel covalent linkages can drive challenging protein properties and capture transient protein-protein and protein-RNA interactions in vivo. Additionally, we examine the application of covalent peptides as potential therapeutic agents and site-specific conjugates for native antibodies, highlighting their capacity to form stable linkages with target molecules. A significant focus is placed on proximity-enabled reactive therapeutics (PERx), a pioneering technology in covalent protein therapeutics. We detail its wide-ranging applications in immunotherapy, viral neutralization, and targeted radionuclide therapy. Finally, we present a perspective on the existing challenges within biospecific chemistry and discuss the potential avenues for future exploration and advancement in this rapidly evolving field.

The construction of modular universal chimeric antigen receptor T (MU-CAR-T) cells by covalent linkage of allogeneic T cells and various antibody fragments

BACKGROUND

Chimeric antigen receptor-T (CAR-T) cells therapy is one of the novel immunotherapeutic approaches with significant clinical success. However, their applications are limited because of long preparation time, high cost, and interpersonal variations. Although the manufacture of universal CAR-T (U-CAR-T) cells have significantly improved, they are still not a stable and unified cell bank.

METHODS

Here, we tried to further improve the convenience and flexibility of U-CAR-T cells by constructing novel modular universal CAR-T (MU-CAR-T) cells. For this purpose, we initially screened healthy donors and cultured their T cells to obtain a higher proportion of stem cell-like memory T (TSCM) cells, which exhibit robust self-renewal capacity, sustainability and cytotoxicity. To reduce the alloreactivity, the T cells were further edited by double knockout of the T cell receptor (TCR) and class I human leukocyte antigen (HLA-I) genes utilizing the CRISPR/Cas9 system. The well-growing and genetically stable universal cells carrying the CAR-moiety were then stored as a stable and unified cell bank. Subsequently, the SDcatcher/GVoptiTag system, which generate an isopeptide bond, was used to covalently connect the purified scFvs of antibody targeting different antigens to the recovered CAR-T cells.

RESULTS

The resulting CAR-T cells can perform different functions by specifically targeting various cells, such as the eradication of human immunodeficiency virus type 1 (HIV-1)-latenly-infected cells or elimination of T lymphoma cells, with similar efficiency as the traditional CAR-T cells did.

CONCLUSION

Taken together, our strategy allows the production of CAR-T cells more modularization, and makes the quality control and pharmaceutic manufacture of CAR-T cells more feasible.

Catcher/Tag Toolbox: Biomolecular Click-Reactions For Protein Engineering Beyond Genetics

Manipulating protein architectures beyond genetic control has attracted widespread attention. Catcher/Tag systems enable highly specific conjugation of proteins in vivo and in vitro via an isopeptide-bond. They provide efficient, robust, and irreversible strategies for protein conjugation and are simple yet powerful tools for a variety of applications in enzyme industry, vaccines, biomaterials, and cellular applications. Here we summarize recent development of the Catcher/Tag toolbox with a particular emphasis on the design of Catcher/Tag pairs targeted for specific applications. We cover the current limitations of the Catcher/Tag systems and discuss the pH sensitivity of the reactions. Finally, we conclude some of the future directions in the development of this versatile protein conjugation method and envision that improved control over inducing the ligation reaction will further broaden the range of applications.

Domain structure and cross-linking in a giant adhesin from the Mobiluncus mulieris bacterium

Cell-surface proteins known as adhesins enable bacteria to colonize particular environments, and in Gram-positive bacteria often contain autocatalytically formed covalent intramolecular cross-links. While investigating the prevalence of such cross-links, a remarkable example was discovered in Mobiluncus mulieris, a pathogen associated with bacterial vaginosis. This organism encodes a putative adhesin of 7651 residues. Crystallography and mass spectrometry of two selected domains, and AlphaFold structure prediction of the remainder of the protein, were used to show that this adhesin belongs to the family of thioester, isopeptide and ester-bond-containing proteins (TIE proteins). It has an N-terminal domain homologous to thioester adhesion domains, followed by 51 immunoglobulin (Ig)-like domains containing ester- or isopeptide-bond cross-links. The energetic cost to the M. mulieris bacterium in retaining such a large adhesin as a single gene or protein construct suggests a critical role in pathogenicity and/or persistence.

Prospects for developing an Hepatitis C virus E1E2-based nanoparticle vaccine

Globally, more than 58 million people are chronically infected with Hepatitis C virus (HCV) with 1.5 million new infections occurring each year. An effective vaccine for HCV is therefore a major unmet medical and public health need. Since HCV rapidly accumulates mutations, vaccines must elicit the production of broadly neutralising antibodies (bnAbs) in a reproducible fashion. Decades of research have generated a number of HCV vaccine candidates. Based on the available data and research through clinical development, a vaccine antigen based on the E1E2 glycoprotein complex appears to be the best choice, but robust induction of humoral and cellular responses leading to virus neutralisation has not yet been achieved. One issue that has arisen in developing an HCV vaccine (and many other vaccines as well) is the platform used for antigen delivery. The majority of viral vaccine trials have employed subunit vaccines. However, subunit vaccines often have limited immunogenicity, as seen for HCV, and thus multiple formats must be examined in order to elicit a robust anti-HCV immune response. Nanoparticle vaccines are gaining prominence in the field due to their ability to facilitate a controlled multivalent presentation and trafficking to lymph nodes, where they can interact with both arms of the immune system. This review discusses the potential for development of a nanoparticle-based HCV E1E2 vaccine, with an emphasis on the potential benefits of such an approach along with the major challenges facing the incorporation of E1E2 into nanoparticulate delivery systems and how those challenges can be addressed.

The position of Spy Tag/Catcher system in hepatitis B core protein particles affects the immunogenicity and stability of the synthetic vaccine

Presenting exogenous antigens on virus-like particles (VLPs) through "plug-and-display" decoration strategies based on SpyTag/SpyCatcher isopeptide bonding have emerged as attractive technology for vaccine synthesis. However, whether the position of ligation site in VLPs will impose effects on immunogenicity and physiochemical properties of the synthetic vaccine remains rarely investigated. Here in the present work, the well-established hepatitis B core (HBc) protein was used as chassis to construct dual-antigen influenza nanovaccines, with the conserved epitope peptides derived from extracellular domain of matrix protein M2 (M2e) and hemagglutinin (HA) as target antigens. The M2e antigen was genetically fused to the HBc in the MIR region, together with the SpyTag peptide, which was fused either in the MIR region or at the N-terminal of the protein, so that a recombinant HA antigen (rHA) linked to SpyCatcher can be displayed on it, at two different localizations. Both synthetic nanovaccines showed ability in inducing strong M2e and rHA-specific antibodies and cellular immunogenicity; nevertheless, the one in which rHA was conjugated by N-terminal Tag ligation, was superior to another one synthesized by linking the rHA to MIR region SpyTagged-HBc in all aspects, including higher antigen-specific immunogenicity responses, lower anti-HBc carrier antibody, as well as better dispersion stability. Surface charge and hydrophobicity properties of the two synthetic nanovaccines were analyzed, results revealed that linking the rHA to MIR region SpyTagged-HBc lead to more significant and disadvantageous alteration in physiochemical properties of the HBc chassis. This study will expand our knowledge on "plug-and-display" decoration strategies and provide helpful guidance for the rational design of HBc-VLPs based modular vaccines by using SpyTag/Catcher synthesis.

Nature-inspired protein ligation and its applications

The ability to manipulate the chemical composition of proteins and peptides has been central to the development of improved polypeptide-based therapeutics and has enabled researchers to address fundamental biological questions that would otherwise be out of reach. Protein ligation, in which two or more polypeptides are covalently linked, is a powerful strategy for generating semisynthetic products and for controlling polypeptide topology. However, specialized tools are required to efficiently forge a peptide bond in a chemoselective manner with fast kinetics and high yield. Fortunately, nature has addressed this challenge by evolving enzymatic mechanisms that can join polypeptides using a diverse set of chemical reactions. Here, we summarize how such nature-inspired protein ligation strategies have been repurposed as chemical biology tools that afford enhanced control over polypeptide composition.

Orthogonal Crosslinking: A Strategy to Generate Novel Protein Topology and Function

Compared to the disulfide bond, other naturally occurring intramolecular crosslinks have received little attention, presumably due to their rarity in the vast protein space. Here we presented examples of natural non-disulfide crosslinks, which we refer to as orthogonal crosslinks, emphasizing their effect on protein topology and function. We summarize recent efforts on expanding orthogonal crosslinks by using either the enzymes that catalyze protein circularization or the genetic code expansion strategy to add electrophilic amino acids site-specifically in proteins. The advantages and disadvantages of each method are discussed, along with their applications to generate novel protein topology and function. In particular, we highlight our recent work on spontaneous orthogonal crosslinking, in which a carbamate-based crosslink was generated in situ, and its applications in designing orthogonally crosslinked domain antibodies with their topology-mimicking bacterial adhesins.

Chlorpyrifos Oxon Activates Glutamate and Lysine for Protein Cross-linking

Chronic low-dose exposure to organophosphorus (OP) toxicants is correlated with an increase in the risk of impaired cognition and neurodegenerative diseases. A mechanism to explain this relationship is needed. We suggest that the formation of organophosphate-induced high-molecular-weight protein aggregates that disrupt cell function may be the missing link. It has been demonstrated that such aggregation can be promoted by OP-labeled lysine. Alternatively, OP-labeled glutamate may be the initiator. To test this hypothesis, we treated MAP-rich tubulin Sus scrofa and human transglutaminase with chlorpyrifos oxon. Trypsin-digested proteins were subjected to liquid chromatography-tandem mass spectrometry followed by Protein Prospector searches to identify diethyl phosphate adducts and cross-linked peptides. We report the presence of diethyl phosphate adducts on the side chains of glutamate, lysine, and tyrosine, as well as cross-links between glutamate and lysine. Glutamate-lysine cross-linking could be initiated either by diethyl phosphate-activated glutamate or by diethyl phosphate-activated lysine to form stable isopeptide bonds between and within proteins. It was concluded that organophosphate-induced high-molecular-weight protein aggregates could promote brain dysfunction.

Development of a synthetic nanoparticle vaccine presenting the HIV-1 envelope glycoprotein

Two-component self-assembling virus-like particles (VLPs) are promising scaffolds for achieving high-density display of HIV-1 envelope (gp140) trimers, which can improve the induction of neutralising antibodies (NAbs). In this study gp140 was displayed on the surface of VLPs formed by the AP205 phage coat protein. The CAP256 SU gp140 antigen was selected as the patient who this virus was isolated from developed broadly neutralising antibodies (bNAbs) shortly after superinfection with this virus. The CAP256 SU envelope is also sensitive to several bNAbs and has shown enhanced reactivity for certain bNAb precursors. A fusion protein comprising the HIV-1 CAP256 SU gp140 and the SpyTag (ST) (gp140-ST) was produced in HEK293 cells, and trimers were purified to homogeneity using gel filtration. SpyCatcher (SC)-AP205 VLPs were produced inEscherichia coliand purified by ultracentrifugation. The gp140-ST trimers and the SC-AP205 VLPs were mixed in varying molar ratios to generate VLPs displaying the glycoprotein (AP205-gp140-ST particles). Dynamic light scattering, negative stain electron microscopy and 2D classification indicated that gp140-ST was successfully bound to the VLPs, although not all potential binding sites were occupied. The immunogenicity of the coupled VLPs was evaluated in a pilot study in rabbits. One group was injected four times with coupled VLPs, and the second group was primed with DNA vaccines expressing Env and a mosaic Gag, followed by modified vaccinia Ankara expressing the same antigens. The animals were then boosted twice with coupled VLPs. Encouragingly, gp140-ST displayed on SC-AP205 VLPs was an effective boost to heterologously primed rabbits, leading to induction of autologous Tier 2 neutralising antibodies in 2/5 rabbits. However, four inoculations of coupled VLPs alone failed to elicit any Tier 2 antibodies. These results demonstrate that the native-like structure of HIV-1 envelope trimers and selection of a geometrically-suitable nanoparticle scaffold to achieve a high-density display of the trimers are important considerations that could improve the effect of nanoparticle-displayed gp140.

Organophosphorus Pesticides Promote Protein Cross-Linking

Exposure to organophosphorus pesticides (OP) can have chronic adverse effects that are independent of inhibition of acetylcholinesterase, the classic target for acute OP toxicity. In pure proteins, the organophosphorus pesticide chlorpyrifos oxon induces a cross-link between lysine and glutamate (or aspartate) with loss of water. Tubulin is particularly sensitive to OP-induced cross-linking. Our goal was to explore OP-induced cross-linking in a complex protein sample, MAP-rich tubulin from Sus scrofa and to test 8 OP for their capacity to promote isopeptide cross-linking. We treated 100 μg of MAP-rich tubulin with 100 μM chlorpyrifos, chlorpyrifos oxon, methamidophos, paraoxon, diazinon, diazoxon, monocrotophos, or dichlorvos. Each sample was separated using sodium dodecyl sulfate-polyacrylamide gel electrophoresis and stained with Coomassie blue. Five gel slices (at about 30, 50, 150, and 300 kDa, and the top of the separating gel) were removed from the lanes for each of the eight OP samples and from untreated control lanes. These gel slices were subjected to in-gel trypsin digestion. MSMS fragmentation spectra of the tryptic peptides were examined for isopeptide cross-links. Sixteen spectra yielded convincing evidence for isopeptide cross-linked peptides. Ten were from the chlorpyrifos oxon reaction, 1 from dichlorvos, 1 from paraoxon, 1 from diazinon, and 3 from diazoxon. It was concluded that catalysis of protein cross-linking is a general property of organophosphorus pesticides and pesticide metabolites. Data are available via ProteomeXchange with identifier PXD034529.

Chlorpyrifos oxon crosslinking of amyloid beta 42 peptides is a new route for generation of self-aggregating amyloidogenic oligomers that promote Alzheimer's disease

Epidemiological evidence suggests that people chronically exposed to organophosphorus pesticides are at increased risk of neurodegenerative disease. Covalently linked amyloid beta dimers have been isolated from the brains of Alzheimer's patients. The toxic forms of amyloid beta are amyloid dimers that spontaneously oligomerize. In the present report we treated recombinant and synthetic amyloid beta (1-42) with 1 mM chlorpyrifos oxon or 1 mM paraoxon. The trypsin-digested samples were analyzed by liquid chromatography tandem mass spectrometry on an Orbitrap Fusion Lumos mass spectrometer. Data were searched with Protein Prospector software. We found two new types of crosslinks in amyloid dimers. An isopeptide Asp-Asp link occurred between the N-terminal amine of Asp 1 in one peptide and the beta carboxyl group of Asp 1 in another peptide. An Asp-Arg link occurred between the guanidino group of Arg 5 in one peptide and the beta carboxyl group of Asp 1 in another peptide. These results show that the active metabolites of the pesticides chlorpyrifos and parathion catalyze the crosslinking of amyloid beta (1-42) into toxic dimers. It was concluded that the increased risk of neurodegenerative disease in people exposed to organophosphorus pesticides could be explained by the crosslinking activity of these chemicals. Data are available via ProteomeXchange with identifier PXD034163.

Dichlorvos-induced formation of isopeptide crosslinks between proteins in SH-SY5Y cells

Chlorpyrifos oxon catalyzes the crosslinking of proteins via an isopeptide bond between lysine and glutamic acid or aspartic acid in studies with purified proteins. Our goal was to determine the crosslinking activity of the organophosphorus pesticide, dichlorvos. We developed a protocol for examining crosslinks in a complex protein mixture consisting of human SH-SY5Y cells exposed to 10 μM dichlorvos. The steps in our protocol included immunopurification of crosslinked peptides by binding to anti-isopeptide antibody 81D1C2, stringent washing of the immobilized complex, release of bound peptides from Protein G agarose with 50% acetonitrile 1% formic acid, liquid chromatography tandem mass spectrometry on an Orbitrap Fusion Lumos mass spectrometer, Protein Prospector searches of mass spectrometry data, and manual evaluation of candidate crosslinked dipeptides. We report a low quantity of dichlorvos-induced KD and KE crosslinked proteins in human SH-SY5Y cells exposed to dichlorvos. Cells not treated with dichlorvos had no detectable KD and KE crosslinked proteins. Proteins in the crosslink were low abundance proteins. In conclusion, we provide a protocol for testing complex protein mixtures for the presence of crosslinked proteins. Our protocol could be useful for testing the association between neurodegenerative disease and exposure to organophosphorus pesticides.

Intramolecular covalent bonds in Gram-positive bacterial surface proteins

Gram-positive bacteria experience considerable mechanical perturbation when adhering to host surfaces during colonization and infection. They have evolved various adhesion proteins that are mechanically robust to ensure strong surface adhesion. Recently, it was discovered that these adhesion proteins contain rare, extra intramolecular covalent bonds that stabilize protein structures and participate in surface bonding. These intramolecular covalent bonds include isopeptides, thioesters, and ester bonds, which often form spontaneously without the need for additional enzymes. With the development of single-molecule force spectroscopy techniques, the detailed mechanical roles of these intramolecular covalent bonds have been revealed. In this review, we summarize the recent advances in this area of research, focusing on the link between the mechanical stability and function of these covalent bonds in Gram-positive bacterial surface proteins. We also highlight the potential impact of these discoveries on the development of novel antibiotics and chemical biology tools.

Efficient Amber Suppression via Ribosomal Skipping for In Situ Synthesis of Photoconditional Nanobodies

Genetic code expansion is a versatile method for in situ synthesis of modified proteins. During mRNA translation, amber stop codons are suppressed to site-specifically incorporate non-canonical amino acids. Thus, nanobodies can be equipped with photocaged amino acids to control target binding on demand. The efficiency of amber suppression and protein synthesis can vary with unpredictable background expression, and the reasons are hardly understood. Here, we identified a substantial limitation that prevented synthesis of nanobodies with N-terminal modifications for light control. After systematic analyses, we hypothesized that nanobody synthesis was severely affected by ribosomal inaccuracy during the early phases of translation. To circumvent a background-causing read-through of a premature stop codon, we designed a new suppression concept based on ribosomal skipping. As an example, we generated intrabodies with photoactivated target binding in mammalian cells. The findings provide valuable insights into the genetic code expansion and describe a versatile synthesis route for the generation of modified nanobodies that opens up new perspectives for efficient site-specific integration of chemical tools. In the area of photopharmacology, our flexible intrabody concept builds an ideal platform to modulate target protein function and interaction.

Reconstruction of a Cofactor Self-Sufficient Whole-Cell Biocatalyst System for Efficient Biosynthesis of Allitol from d-Glucose

The combined catalysis of glucose isomerase (GI), d-psicose 3-epimerase (DPEase), ribitol dehydrogenase (RDH), and formate dehydrogenase (FDH) provides a convenient route for the biosynthesis of allitol from d-glucose; however, the low catalytic efficiency restricts its industrial applications. Here, the supplementation of 0.32 g/L NAD⁺ significantly promoted the cell catalytic activity by 1.18-fold, suggesting that the insufficient intracellular NAD(H) content was a limiting factor in allitol production. Glucose dehydrogenase (GDH) with 18.13-fold higher activity than FDH was used for reconstructing a cofactor self-sufficient system, which was combined with the overexpression of the rate-limiting genes involved in NAD⁺ salvage metabolic flow to expand the available intracellular NAD(H) pool. Then, the multienzyme self-assembly system with SpyTag and SpyCatcher effectively channeled intermediates, leading to an 81.1% increase in allitol titer to 15.03 g/L from 25 g/L d-glucose. This study provided a facilitated strategy for large-scale and efficient biosynthesis of allitol from a low-cost substrate.

New covalent bonding ability for proteins

To expand protein's covalent bonding ability, latent bioreactive unnatural amino acids have been designed and genetically encoded into proteins, which react with specific natural amino acid residues through proximity-enabled bioreactivity. The resultant new covalent bonds can be selectively created within and between proteins in vitro, in cells, and in vivo. Offering diverse properties previously unattainable, these covalent linkages have been harnessed to enhance protein properties, to modulate protein function, to probe ligand-receptor binding, to identify elusive protein interactions, and to develop covalent protein drugs. Selective introduction of covalent bonds into proteins is affording novel avenues for biological studies, synthetic biology, and biotherapeutics.

Detection of Isopeptide Bonds in Monoclonal Antibody Aggregates

Purpose

A major difficulty in monoclonal antibody (mAb) therapeutic development is product aggregation. In this study, intermolecular isopeptide bonds in mAb aggregates were characterized for the first time. We aim to propose a mechanism of covalent aggregation in a model antibody using stressed studies at raised temperatures to aid in the understanding of mAb aggregation pathways.

Methods

Aggregate fractions were generated using raised temperature and were purified using size-exclusion chromatography (SEC). The fractions were tryptically digested and characterized using liquid chromatography hyphenated to tandem mass-spectrometry (LC–MS/MS).

Results

An increased amount of clipping between aspartic acid and proline in a solvent accessible loop in the constant heavy 2 (CH2) domain of the mAb was observed under these conditions. Detailed peptide mapping revealed 14 isopeptide bonds between aspartic acid at that cleavage site and lysine residues on adjacent antibodies. Two additional isopeptide bonds were identified between the mAb HC N-terminal glutamic acid or a separate aspartic acid to lysine residues on adjacent antibodies.

Conclusions

Inter-protein isopeptide bonds between the side chains of acidic amino acids (aspartate and glutamate) and lysine were characterized for the first time in mAb aggregates. A chemical mechanism was presented whereby spontaneous isopeptide bond formation could be facilitated via either the aspartic acid side chain or C-terminus.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11095-021-03103-y.

Virus-Like Particle Vaccines Against Respiratory Viruses and Protozoan Parasites

The field of vaccinology underwent massive advances over the past decades with the introduction of virus-like particles (VLPs), a supra-molecular nanoparticle vaccine platform that resembles viral structures without the ability to replicate in hosts. This innovative approach has been remarkably effective, as evidenced by its profound immunogenicity and safety. These highly desirable intrinsic properties enabled their further development as vaccines against a multitude of diseases. To date, several VLP-based vaccines have already been commercialized and many more are undergoing clinical evaluation prior to FDA approval. However, efficacious vaccines against a plethora of pathogens are still lacking, which imposes a tremendous socioeconomic burden and continues to threaten public health throughout the globe. This is especially the case for several respiratory pathogens and protozoan parasites. In this review, we briefly describe the fundamentals of VLP vaccines and the unique properties that enable these to be such valuable vaccine candidates and summarize current advances in VLP-based vaccines targeting respiratory and parasitic diseases of global importance.

Evaluation of mass spectrometry MS/MS spectra for the presence of isopeptide crosslinked peptides

Isopeptide crosslinked proteins can be the product of transglutaminase or of exposure to organophosphorus toxicants (OP). Transglutaminase links glutamine to lysine with loss of ammonia. OP toxicants induce a link between glutamic acid and lysine with loss of water. Our goal was to establish criteria to distinguish real from false isopeptide crosslinks reported by software searches of mass spectrometry data. We used fragmentation spectra of tryptic peptides from MAP-rich tubulin Sus scrofa as a test system for detection of naturally-occurring isopeptide crosslinks. Data were analyzed with Protein Prospector. Criteria for the assignments included the presence of at least 1 crosslink specific product ion, fragment ions from both peptides, Protein Prospector scores ≥20, and best fit of the MS/MS data to the crosslinked peptide as opposed to a linear peptide. Out of 301,364 spectra, 15 potential transglutaminase-type crosslinked peptide candidates were identified. Manual evaluation of these MS/MS spectra reduced the number to 1 valid crosslink between Q112 of NFH and K368 of Tau. Immunopurification with anti-isopeptide 81D1C2 confirmed that MAP-rich tubulin contained only one isopeptide. Support for this isopeptide bond was obtained by showing that transglutaminase was capable of incorporating dansyl-aminohexyl -QQIV into K368. A model of the KIETHK-QLEAHNR isopeptide was synthesized with the aid of transglutaminase. MS/MS spectra of the model validated our interpretation of the native isopeptide. An OP-induced isopeptide bond between K163 of tubulin alpha-1A and E158 of tubulin beta-4B was induced by treating MAP-rich tubulin with 100 μM chlorpyrifos oxon. This crosslink was supported by the criteria described above and by the presence of diethoxyphospho-lysine 163 in the tubulin alpha-1A peptide. The information obtained in this work is valuable for future studies that aim to understand why exposure to OP is associated with increased risk of neurodegenerative disease.

Recent Advances in Biocatalysis with Chemical Modification and Expanded Amino Acid Alphabet

The two main strategies for enzyme engineering, directed evolution and rational design, have found widespread applications in improving the intrinsic activities of proteins. Although numerous advances have been achieved using these ground-breaking methods, the limited chemical diversity of the biopolymers, restricted to the 20 canonical amino acids, hampers creation of novel enzymes that Nature has never made thus far. To address this, much research has been devoted to expanding the protein sequence space via chemical modifications and/or incorporation of noncanonical amino acids (ncAAs). This review provides a balanced discussion and critical evaluation of the applications, recent advances, and technical breakthroughs in biocatalysis for three approaches: (i) chemical modification of cAAs, (ii) incorporation of ncAAs, and (iii) chemical modification of incorporated ncAAs. Furthermore, the applications of these approaches and the result on the functional properties and mechanistic study of the enzymes are extensively reviewed. We also discuss the design of artificial enzymes and directed evolution strategies for enzymes with ncAAs incorporated. Finally, we discuss the current challenges and future perspectives for biocatalysis using the expanded amino acid alphabet.

How Quality Control Systems AID Sec-Dependent Protein Translocation

The evolutionarily conserved Sec machinery is responsible for transporting proteins across the cytoplasmic membrane. Protein substrates of the Sec machinery must be in an unfolded conformation in order to be translocated across (or inserted into) the cytoplasmic membrane. In bacteria, the requirement for unfolded proteins is strict: substrate proteins that fold (or misfold) prematurely in the cytoplasm prior to translocation become irreversibly trapped in the cytoplasm. Partially folded Sec substrate proteins and stalled ribosomes containing nascent Sec substrates can also inhibit translocation by blocking (i.e., “jamming”) the membrane-embedded Sec machinery. To avoid these issues, bacteria have evolved a complex network of quality control systems to ensure that Sec substrate proteins do not fold in the cytoplasm. This quality control network can be broken into three branches, for which we have defined the acronym “AID”: (i) avoidance of cytoplasmic intermediates through cotranslationally channeling newly synthesized Sec substrates to the Sec machinery; (ii) inhibition of folding Sec substrate proteins that transiently reside in the cytoplasm by molecular chaperones and the requirement for posttranslational modifications; (iii) destruction of products that could potentially inhibit translocation. In addition, several stress response pathways help to restore protein-folding homeostasis when environmental conditions that inhibit translocation overcome the AID quality control systems.

Sortase-assembled pili in Corynebacterium diphtheriae are built using a latch mechanism

Gram-positive bacteria assemble pili (fimbriae) on their surfaces to adhere to host tissues and to promote polymicrobial interactions. These hair-like structures, although very thin (1 to 5 nm), exhibit impressive tensile strengths because their protein components (pilins) are covalently crosslinked together via lysine-isopeptide bonds by pilus-specific sortase enzymes. While atomic structures of isolated pilins have been determined, how they are joined together by sortases and how these interpilin crosslinks stabilize pilus structure are poorly understood. Using a reconstituted pilus assembly system and hybrid structural biology methods, we elucidated the solution structure and dynamics of the crosslinked interface that is repeated to build the prototypical SpaA pilus from Corynebacterium diphtheriae We show that sortase-catalyzed introduction of a K190-T494 isopeptide bond between adjacent SpaA pilins causes them to form a rigid interface in which the LPLTG sorting signal is inserted into a large binding groove. Cellular and quantitative kinetic measurements of the crosslinking reaction shed light onto the mechanism of pilus biogenesis. We propose that the pilus-specific sortase in C. diphtheriae uses a latch mechanism to select K190 on SpaA for crosslinking in which the sorting signal is partially transferred from the enzyme to a binding groove in SpaA in order to facilitate catalysis. This process is facilitated by a conserved loop in SpaA, which after crosslinking forms a stabilizing latch that covers the K190-T494 isopeptide bond. General features of the structure and sortase-catalyzed assembly mechanism of the SpaA pilus are likely conserved in Gram-positive bacteria.

Engineering of Group A Streptococcus Isopeptide Bonds into Immunoglobulin-Like Protein Domains

Intramolecular isopeptide bonds, formed autocatalytically between Lys and Asn/Asp side chains, are widely present in the immunoglobulin-like domains of Gram-positive bacterial adhesins, including Group A Streptococcus, and confer considerable mechanical and chemical stability. These properties make them attractive for applications in biotechnology. Here, we detail the practical considerations that are involved in engineering isopeptide bonds into Ig-like proteins, including the choice of a site where bond-forming residues could be introduced and the appropriate methodology for mutagenesis. We specify how to determine whether an isopeptide bond has formed, what strategies can be adopted to overcome problems, and how to monitor the stability of the engineered protein.

Protein folding modulates the chemical reactivity of a Gram-positive adhesin

Gram-positive bacteria colonize mucosal tissues, withstanding large mechanical perturbations such as coughing, which generate shear forces that exceed the ability of non-covalent bonds to remain attached. To overcome these challenges, the pathogen Streptococcus pyogenes utilizes the protein Cpa, a pilus tip-end adhesin equipped with a Cys-Gln thioester bond. The reactivity of this bond towards host surface ligands enables covalent anchoring; however, colonization also requires cell migration and spreading over surfaces. The molecular mechanisms underlying these seemingly incompatible requirements remain unknown. Here we demonstrate a magnetic tweezers force spectroscopy assay that resolves the dynamics of the Cpa thioester bond under force. When folded at forces <6 pN, the Cpa thioester bond reacts reversibly with amine ligands, which are common in inflammation sites; however, mechanical unfolding and exposure to forces >6 pN block thioester reformation. We hypothesize that this folding-coupled reactivity switch (termed a smart covalent bond) could allow the adhesin to undergo binding and unbinding to surface ligands under low force and remain covalently attached under mechanical stress.

Live long and active: Polypeptide-mediated assembly of antibody variable fragments

Antibodies possess multiple biologically relevant features that have been engineered into new therapeutic formats. Two examples include the adaptable specificity of their variable (Fv) region and the extension of plasma circulation times through their crystallizable (Fc) region. Since the invention of the single chain variable fragment (scFv) in 1988, antibody variable regions have been re-engineered into a wide variety of multifunctional nanostructures. Among these strategies, peptide-mediated self-assembly of variable regions through heterologous expression has become a powerful method to produce homogenous, functional biomaterials. This manuscript reviews recent reports of antibody fragments assembled through fusion with peptides and proteins, including elastin-like polypeptides (ELPs), collagen-like polypeptides (CLPs), albumin, transmembrane proteins, leucine zippers, silk protein, and viruses. This review further discusses the current clinical status of engineered antibody fragments and challenges to overcome.

The Spy that links: Creation of nonlinear protein architectures and materials using SpyTag/SpyCatcher chemistry

The peptide/protein pair, SpyTag/SpyCatcher, which is derived from split immunoglobulin-like collagen adhesin domain (CnaB2) from Streptococcus pyogenes, can spontaneously form a stable Lys-Asp isopeptide bond under physiological conditions. This enabling technology- also known as genetically encoded click chemistry owing to its marked efficiency and specificity-has led to a variety of applications in protein engineering, materials science and synthetic biology in recent years. In this chapter, we discuss the use of SpyTag/SpyCatcher chemistry to create nonlinear protein architectures and materials, with emphasis on its role in shaping up topology engineering as an emerging branch of protein engineering. The synthesis of entirely protein-based molecular networks, Spy networks, is highlighted. The protocols for preparing Spy networks and applications thereof are also illustrated.

Tagging and catching: rapid isolation and efficient labeling of organelles using the covalent Spy-System in planta

BACKGROUND

Up-to-now, several biochemical methods have been developed to allow specific organelle isolation from plant tissues. These procedures are often time consuming, require substantial amounts of plant material, have low yield or do not result in pure organelle fractions. Moreover, barely a protocol allows rapid and flexible isolation of different subcellular compartments. The recently published SpySystem enables the in vitro and in vivo covalent linkage between proteins and protein complexes. Here we describe the use of this system to tag and purify plant organelles.

RESULTS

We developed a simple and specific method to in vivo tag and visualize, as well as isolate organelles of interest from crude plant extracts. This was achieved by expressing the covalent split-isopeptide interaction system, consisting of SpyTag and SpyCatcher, in Nicotiana benthamiana leaves. The functionality of the SpySystem in planta, combined with downstream applications, was proven. Using organelle-specific membrane anchor sequences to program the sub-cellular localization of the SpyTag peptide, we could tag the outer envelope of chloroplasts and mitochondria. By co-expression of a cytosolic, soluble eGFP-SpyCatcher fusion protein, we could demonstrate intermolecular isopeptide formation in planta and proper organelle targeting of the SpyTag peptides to the respective organelles. For one-step organelle purification, recombinantly expressed SpyCatcher protein was immobilized on magnetic microbeads via covalent thiol-etherification. To isolate tagged organelles, crude plant filtrates were mixed with SpyCatcher-coated beads which allowed isolation of SpyTag-labelled chloroplasts and mitochondria. The isolated organelles were intact, showed high yield and hardly contaminants and can be subsequently used for further molecular or biochemical analysis.

CONCLUSION

The SpySystem can be used to in planta label subcellular structures, which enables the one-step purification of organelles from crude plant extracts. The beauty of the system is that it works as a covalent toolbox. Labeling of different organelles with individual tags under control of cell-specific and/or inducible promoter sequences will allow the rapid organelle and cell-type specific purification. Simultaneous labeling of different organelles with specific Tag/Catcher combinations will enable simultaneous isolation of different organelles from one plant extract in future experiments.

Cancer biomarker detection in human serum samples using nanoparticle decorated epitope-mediated hybrid MIP

The determination of disease-associated molecules at trace amounts is a key factor for early and efficient diagnosis from human body fluids. Herein, an ultrasensitive electrochemical sensor based on hybrid epitope imprinting and nanomaterial amplification was developed. The hybrid epitope imprinting was achieved by electropolymerization in the presence of two computationally selected and cysteine modified epitopes of neuron specific enolase (NSE), as-synthesized gold nanoparticles (AuNPs), and functional monomer. The AuNPs decorated epitope-mediated hybrid MIPs, as well as the standard hybrid MIPs, were utilized for the preparation of electrochemical sensors to demonstrate the impact of nanomaterial's modification in the polymer network for biomarker sensing. The fabrication process of both sensor types was investigated by employing cyclic voltammetry, square wave voltammetry, atomic force microscopy, and scanning electron microscopy. The biomarker assay using the standard hybrid MIPs resulted in 2.5-fold higher sensitivity compared to single epitope imprints, whereas the AuNP-hybrid MIPs enhanced the sensitivity level to a great extent and allowed the recognition of NSE in human serum in a concentration range of 25-4000 pg/mL. Comparative selectivity studies with non-imprinted polymer resulted in an imprinting factor of 4.2, confirming the high target selectivity of AuNP-MIP cavities. Cross-reaction of the sensor with four reference molecules (dopamine, bovine serum albumin, glucose and elongated peptide) was negligible. As compared to current strategies for epitope imprinting which rely on single epitopes for the formation of molecular cavities, the hybrid epitope-MIPs, particularly with the inclusion of AuNPs have provided more desirable sensing platforms with high sensitivity, affinity and specificity.

Identifying transglutaminase reaction products via mass spectrometry as exemplified by the MUC2 mucin - Pitfalls and traps

In order to demonstrate transglutaminase activity in biological samples immunological as well as glutamine- and amine-donor based assays are commonly used. However, the identification of the transglutaminase reaction product, i. e. the isopeptide cross-linked peptides/proteins or the deamidated protein/peptide are often neglected. This article describes a workflow for the detection of the products of transglutaminase-catalyzed reactions. In particular, possible pitfalls and traps that can arise during the mass spectrometry-based identification of isopeptide cross-links are addressed and characterised on actual samples.

Chlorpyrifos Oxon-Induced Isopeptide Bond Formation in Human Butyrylcholinesterase

A newly recognized action of organophosphates (OP) is the ability to crosslink proteins through an isopeptide bond. The first step in the mechanism is covalent addition of the OP to the side chain of lysine. This activates OP-lysine for reaction with a nearby glutamic or aspartic acid to make a gamma glutamyl epsilon lysine bond. Crosslinked proteins are high molecular weight aggregates. Our goal was to identify the residues in the human butyrylcholinesterase (HuBChE) tetramer that were crosslinked following treatment with 1.5 mM chlorpyrifos oxon. High molecular weight bands were visualized on an SDS gel. Proteins in the gel bands were digested with trypsin, separated by liquid chromatography and analyzed in an Orbitrap mass spectrometer. MSMS files were searched for crosslinked peptides using the Batch-Tag program in Protein Prospector. MSMS spectra were manually evaluated for the presence of ions that supported the crosslinks. The crosslink between Lys544 in VLEMTGNIDEAEWEWK₅₄₄AGFHR and Glu542 in VLEMTGNIDEAEWE₅₄₂WK satisfied our criteria including that of spatial proximity. Distances between Lys544 and Glu542 were 7.4 and 9.5 Å, calculated from the cryo-EM (electron microscopy) structure of the HuBChE tetramer. Paraoxon ethyl, diazoxon, and dichlorvos had less pronounced effects as visualized on SDS gels. Our proof-of-principle study provides evidence that OP have the ability to crosslink proteins. If OP-induced protein crosslinking occurs in the brain, OP exposure could be responsible for some cases of neurodegenerative disease.

Approaching infinite affinity through engineering of peptide-protein interaction

Interactions between proteins normally depend on a range of noncovalent contacts. Under challenging conditions, such as with mechanical force or over long time periods, noncovalent interactions break. Unbreakable protein–protein interactions, linked by covalent bonding, provide many opportunities for robust connection of molecular building blocks, including for biomaterials, enzymes, and vaccines. When evaluating unbreakable interactions, it is important to consider whether reaction happens quickly even at low concentrations. Here we establish a genetically encoded peptide that reacts with its genetically encoded protein partner with a speed close to the limit set by diffusion. We apply a range of biophysical methods to understand the dynamics required for this interaction, demonstrating applicability to rapid and specific detection in a range of species.

Much of life’s complexity depends upon contacts between proteins with precise affinity and specificity. The successful application of engineered proteins often depends on high-stability binding to their target. In recent years, various approaches have enabled proteins to form irreversible covalent interactions with protein targets. However, the rate of such reactions is a major limitation to their use. Infinite affinity refers to the ideal where such covalent interaction occurs at the diffusion limit. Prototypes of infinite affinity pairs have been achieved using nonnatural reactive groups. After library-based evolution and rational design, here we establish a peptide–protein pair composed of the regular 20 amino acids that link together through an amide bond at a rate approaching the diffusion limit. Reaction occurs in a few minutes with both partners at low nanomolar concentration. Stopped flow fluorimetry illuminated the conformational dynamics involved in docking and reaction. Hydrogen–deuterium exchange mass spectrometry gave insight into the conformational flexibility of this split protein and the process of enhancing its reaction rate. We applied this reactive pair for specific labeling of a plasma membrane target in 1 min on live mammalian cells. Sensitive and specific detection was also confirmed by Western blot in a range of model organisms. The peptide–protein pair allowed reconstitution of a critical mechanotransmitter in the cytosol of mammalian cells, restoring cell adhesion and migration. This simple genetic encoding for rapid irreversible reaction should provide diverse opportunities to enhance protein function by rapid detection, stable anchoring, and multiplexing of protein functionality.

Structure and chemistry of lysinoalanine crosslinking in the spirochaete flagella hook

The flagellar hook protein FlgE from spirochaete bacteria self-catalyzes the formation of an unusual inter-subunit lysinoalanine (Lal) crosslink that is critical for cell motility. Unlike other known examples of Lal biosynthesis, conserved cysteine and lysine residues in FlgE spontaneously react to form Lal without the involvement of additional enzymes. Oligomerization of FlgE via its D0 and Dc domains drives assembly of the crosslinking site at the D1-D2 domain interface. Structures of the FlgED2 domain, dehydroalanine (DHA) intermediate and Lal crosslinked FlgE subunits reveal successive snapshots of the reaction. Cys178 flips from a buried configuration to release hydrogen sulfide (H2S/HS-) and produce DHA. Interface residues provide hydrogen bonds to anchor the active site, facilitate β-elimination of Cys178 and polarize the peptide backbone to activate DHA for reaction with Lys165. Cysteine-reactive molecules accelerate DHA formation, whereas nucleophiles can intercept the DHA intermediate, thereby indicating a potential for Lal crosslink inhibitors to combat spirochaetal diseases.

Development of SpyTag/SpyCatcher-Bacmid Expression Vector System (SpyBEVS) for Protein Bioconjugations Inside of Silkworms

Protein conjugations at post-translational levels are known to be essential to protein stability and function. Recently, it has been proven that the split protein CnaB2 (SpyTag/SpyCatcher, ST/SC) from Streptococcus pyogenes can induce covalent conjugation rapidly and efficiently under various conditions. The protein of interest fused with the split protein SC/ST could be assembled spontaneously. In light of this finding, we introduced the ST/SC protein coupling concept into the silkworm-bacmid protein expression system (SpyBEVS). As a proof of concept, we first examined and confirmed that a competent ligation occurred between ST/SC-fused protein partners in vitro in cultured silkworm cells and in vivo in silkworm larvae by co-infection of several recombinant baculoviruses. The protein conjugation could be also achieved sufficiently by a simple one-step mixture of purified ST/SC-tagged peptide-protein pairs in vitro. Given the flexibility and robustness of silkworm-BEVS, our results on SpyBEVS show an alternative method for enabling the production of protein decorations in vitro and inside of silkworms.

Cleavage C-terminal to Asp leads to covalent crosslinking of long-lived human proteins

With age, long-lived proteins in the human body deteriorate, which can have consequences both for aging and disease. The aging process is often associated with the formation of covalently crosslinked proteins. Currently our knowledge of the mechanism of formation of these crosslinks is limited. In this study, proteomics was used to characterize sites of covalent protein-protein crosslinking and identify a novel mechanism of protein-protein crosslinking in the adult human lens. In this mechanism, Lys residues are crosslinked to C-terminal Asp residues that are formed by non-enzymatic protein truncation. Ten different crosslinks were identified in major lens proteins such as αA-crystallin, αB-crystallin and AQP0. Crosslinking in AQP0 increased significantly with age and also increased significantly in cataract lenses compared with normal lenses. Using model peptides, a mechanism of formation of the Lys-Asp crosslink was elucidated. The mechanism involves spontaneous peptide cleavage on the C-terminal side of Asp residues which can take place in the pH range 5-7.4. Cleavage appears to involve attack by the side chain carboxyl group on the adjacent peptide bond, resulting in the formation of a C-terminal Asp anhydride. This anhydride intermediate can then either react with water to form Asp, or with a nucleophile, such as a free amine group to form a crosslink. If an ε-amino group of Lys or an N-terminal amine group attacks the anhydride, a covalent protein-protein crosslink will be formed. This bi-phasic mechanism represents the first report to link two spontaneous events: protein cleavage and crosslinking that are characteristic of long-lived proteins.

Molecular engineering strategies for visualizing low-affinity protein complexes

The growing availability of complex structures in the Protein Data Bank has provided key insight into the molecular architecture of protein–protein interfaces. The remarkable diversity observed in protein binding modes is paralleled by a tremendous variation in binding affinities, with interaction half-lives ranging from days to milliseconds. Within the protein interactome, low-affinity binding events have been particularly difficult to visualize by traditional structural methods, which has spurred the development of innovative strategies for reconstituting these short-lived yet biologically essential assemblies. An important takeaway from structural studies of low-affinity systems is that there is no universal solution for stabilizing protein complexes, and approaches such as single-chain fusions, biochemical linkages, and affinity-maturation have each been successful in certain contexts. In this article, we review how advances in molecular engineering have been used to capture weakly associated complexes for structure determination, and we provide perspectives on how the continued application of these methods can shed new light on the “hidden world” of low-affinity interactions.

Impact statement

Low-affinity protein interactions, while biologically essential, have been difficult to visualize by traditional methods in structural biology. In this review, we describe a series of innovative molecular engineering strategies that have been used to stabilize weakly bound protein complexes for structure determination. By highlighting several examples from the literature along with potential advantages and disadvantages of the individual approaches, we hope to provide an introductory resource for structural biologists studying low-affinity systems.

The Biosynthesis and Structures of Bacterial Pili

To interact with the external environments, bacteria often display long proteinaceous appendages on their cell surface, called pili or fimbriae. These non-flagellar thread-like structures are polymers composed of covalently or non-covalently interacting repeated pilin subunits. Distinct pilus classes can be identified on basis of their assembly pathways, including chaperone-usher pili, type V pili, type IV pili, curli and fap fibers, conjugative and type IV secretion pili, as well as sortase-mediated pili. Pili play versatile roles in bacterial physiology, and can be involved in adhesion and host cell invasion, DNA and protein secretion and uptake, biofilm formation, cell motility and more. Recent advances in structure determination of components involved in the various pilus systems has enabled a better molecular understanding of their mechanisms of assembly and function. In this chapter we describe the diversity in structure, biogenesis and function of the different pilus systems found in Gram-positive and Gram-negative bacteria, and review their potential as anti-microbial targets.

Calcium stabilizes the strongest protein fold

Staphylococcal pathogens adhere to their human targets with exceptional resilience to mechanical stress, some propagating force to the bacterium via small, Ig-like folds called B domains. We examine the mechanical stability of these folds using atomic force microscopy-based single-molecule force spectroscopy. The force required to unfold a single B domain is larger than 2 nN – the highest mechanostability of a protein to date by a large margin. B domains coordinate three calcium ions, which we identify as crucial for their extreme mechanical strength. When calcium is removed through chelation, unfolding forces drop by a factor of four. Through systematic mutations in the calcium coordination sites we can tune the unfolding forces from over 2 nN to 0.15 nN, and dissect the contribution of each ion to B domain mechanostability. Their extraordinary strength, rapid refolding and calcium-tunable force response make B domains interesting protein design targets.

Staphylococcal pathogens adhere to their human targets using adhesins, which can withstand extremely high forces. Here, authors use single-molecule force spectroscopy to determine the similarly high unfolding forces of B domains that link the adhesin to the bacterium.

A new structural class of bacterial thioester domains reveals a slipknot topology

An increasing number of surface-associated proteins identified in Gram-positive bacteria are characterized by intramolecular cross-links in structurally conserved thioester, isopeptide, and ester domains (TIE proteins). Two classes of thioester domains (TEDs) have been predicted based on sequence with, to date, only representatives of Class I structurally characterized. Here, we present crystal structures of three Class II TEDs from Bacillus anthracis, vancomycin-resistant Staphylococcus aureus, and vancomycin-resistant Enterococcus faecium. These proteins are structurally distinct from Class I TEDs due to a β-sandwich domain that is inserted into the conserved TED fold to form a slipknot structure. Further, the B. anthracis TED domain is presented in the context of a full-length sortase-anchored protein structure (BaTIE). This provides insight into the three-dimensional arrangement of TIE proteins, which emerge as very abundant putative adhesins of Gram-positive bacteria.

Molecular strategy for blocking isopeptide bond formation in nascent pilin proteins

Bacteria anchor to their host cells through their adhesive pili, which must resist the large mechanical stresses induced by the host as it attempts to dislodge the pathogens. The pili of gram-positive bacteria are constructed as a single polypeptide made of hundreds of pilin repeats, which contain intramolecular isopeptide bonds strategically located in the structure to prevent their unfolding under force, protecting the pilus from degradation by extant proteases and oxygen radicals. Here, we demonstrate the design of a short peptide that blocks the formation of the isopeptide bond present in the pilin Spy0128 from the human pathogen Streptococcus pyogenes, resulting in mechanically labile pilin domains. We use a combination of protein engineering and atomic-force microscopy force spectroscopy to demonstrate that the peptide blocks the formation of the native isopeptide bond and compromises the mechanics of the domain. While an intact Spy0128 is inextensible at any force, peptide-modified Spy0128 pilins readily unfold at very low forces, marking the abrogation of the intramolecular isopeptide bond as well as the absence of a stable pilin fold. We propose that isopeptide-blocking peptides could be further developed as a type of highly specific antiadhesive antibiotics to treat gram-positive pathogens.

Chlorpyrifos oxon promotes tubulin aggregation via isopeptide cross-linking between diethoxyphospho-Lys and Glu or Asp: Implications for neurotoxicity

Exposure to organophosphorus toxicants (OP) can have chronic adverse effects that are not explained by inhibition of acetylcholinesterase, the cause of acute OP toxicity. We therefore hypothesized that OP-induced chronic illness is initiated by the formation of organophosphorus adducts on lysine residues in proteins, followed by protein cross-linking and aggregation. Here, Western blots revealed that exposure to the OP chlorpyrifos oxon converted porcine tubulin from its original 55-kDa mass to high-molecular-weight aggregates. Liquid chromatography–tandem MS analysis of trypsin-digested samples identified several diethoxyphospho-lysine residues in the OP-treated tubulin. Using a search approach based on the Batch Tag program, we identified cross-linked peptides and found that these chemically activated lysines reacted with acidic amino acid residues creating γ-glutamyl-ϵ-lysine or aspartyl-ϵ-lysine isopeptide bonds between β- and α-tubulin. Of note, these cross-linked tubulin molecules accounted for the high-molecular-weight aggregates. To the best of our knowledge, this is the first report indicating that chlorpyrifos oxon–exposed tubulin protein forms intermolecular cross-links with other tubulin molecules, resulting in high-molecular-weight protein aggregates. It is tempting to speculate that chronic illness from OP exposure may be explained by a mechanism that starts with OP adduct formation on protein lysines followed by protein cross-linking. We further speculate that OP-modified or cross-linked tubulin can impair axonal transport, reduce neuron connections, and result in neurotoxicity.