Ultrasound-assisted degradation of organic dyes over magnetic CoFe2O4@ZnS core-shell nanocomposite

Synthesis of magnetic layered double hydroxide (Fe3O4@CuCr-LDH) decorated with ZIF-8 for efficient sonocatalytic degradation of tetracycline

A series of Fe3O4@CuCr-LDH hybrids decorated with different amount of ZIF-8 (FLZ, 10-40 wt%) was prepared using simple methods and characterized with different techniques. The activity of the synthesized nanocomposites was investigated in the sonocatalytic degradation of tetracycline (TC) antibiotic from wastewater. When the content of ZIF-8 in the nanocomposite structure was 20 wt%, the FLZ-20 sonocatalyst exhibited the high performance in the sonocatalytic removal of TC. At optimum conditions (0.7 g/L catalyst dosage, pH of 7, 50 mg/L initial concentration of antibiotic, and 15 min sonication time) of the sonocatalytic removal of TC approached to 91.4% under ultrasonic irradiation (USI) using FLZ-20. This efficiency was much higher than those of obtained results by Fe3O4@CuCr-LDH and pristine ZIF-8. The formed ●OH and ●O2- exhibited the major roles in the sonocatalytic TC degradation process. The excellent performance of FLZ-20 can be attributed to the heterojunctions created between composite components, which could improve the electron transfer ability and effectively separate e-/h+ pairs. In addition, FLZ-20 showed the superior reusability and stability during three successive recycling. Moreover, the facile magnetically separation of the sonocatalyst from the aqueous solution was another outstanding feature, which prevents the formation of secondary pollutants. It can be concluded that the fabrication of heterojunctions is an efficient procedure to promote the sonocatalytic acting of the catalyst.

Ultrasonic treatment of dye chemicals in wastewater: A review

The existence of pollutants, such as toxic organic dye chemicals, in water and wastewater raises concerns as they are inadequately eliminated through conventional water and wastewater treatment methods, including physicochemical and biological processes. Ultrasonic treatment has emerged as an advanced treatment process that has been widely applied to the decomposition of recalcitrant organic contaminants. Ultrasonic treatment has several advantages, including easy operation, sustainability, non-secondary pollutant production, and saving energy. This review examines the elimination of dye chemicals and categorizes them into cationic and anionic dyes based on the existing literature. The objectives include (i) analyzing the primary factors (water quality and ultrasonic conditions) that influence the sonodegradation of dye chemicals and their byproducts during ultrasonication, (ii) assessing the impact of the different sonocatalysts and combined systems (with ozone and ultraviolet) on sonodegradation, and (iii) exploring the characteristics-based removal mechanisms of dyes. In addition, this review proposes areas for future research on ultrasonic treatment of dye chemicals in water and wastewater.

A nivalenol imprinted quartz crystal microbalance sensor based on sulphur-incorporating cobalt ferrite and its application to rice samples

Nivalenol as a mycotoxin pesticide is toxic to humans and animals and causes major health problems including hemorrhage, anemia, and vomiting. Thus, the need for fast and reliable analytical systems in terms of the management of health risks resulting from nivalenol exposure has increased in recent years. The aim of this study involved a novel molecularly imprinted quartz crystal microbalance sensor preparation based on sulphur-incorporating cobalt ferrite for nivalenol detection in rice samples. For this aim, cobalt ferrite and sulfur incorporated cobalt ferrite were successfully synthesized by sol-gel and calcination methods, respectively. Then, nivalenol imprinted quartz crystal microbalance chips based on cobalt ferrite and sulfur incorporated cobalt ferrite were prepared by an ultraviolet polymerization technique including N,N'-azobisisobutyronitrile as the initiator, ethylene glycol dimethacrylate as the cross-linker, methacryloylamidoglutamic acid as the monomer, and nivalenol as the analyte. After some spectroscopic, electrochemical and microscopic characterization studies, the developed sensor was applied to rice grain samples for the determination of nivalenol. The linearity of the prepared sensor was observed to be 1.0-10.0 ng L-1 and the limit of quantification and detection limit were found to be 1.0 and 0.33 ng L-1, respectively. Finally, the high selectivity, repeatability, and stability of the prepared sensor based on sulphur-incorporating cobalt ferrite and a molecularly imprinted polymer can ensure safe food consumption worldwide.

Sonoactivated Nanomaterials: A potent armament for wastewater treatment

The world is currently facing a critical issue of water pollution, with wastewater being a major contributor. It comes from different types of pollutants, including industrial, medical, agricultural, and domestic. Effective treatment of wastewater requires efficient degradation of pollutants and carcinogens prior to discharge. Commonly used methods for wastewater treatment include filtration, adsorption, biodegradation, advanced oxidation processes, and Fenton oxidation, among others.The sonochemical effect refers to the decomposition, oxidation, reduction, and other reactions of pollutant molecules in wastewater upon ultrasound activation, achieving pollutants removal. Furthermore, the micro-flow effect generated by ultrasonic waves creates tiny bubbles and eddies. This significantly increases the contact area and exchange speed of pollutants and dissolved oxygen, thereby accelerating pollutant degradation. Currently, ultrasonic-assisted technology has emerged as a promising approach due to its strong oxidation ability, simple and cheap equipments, and minimal secondary pollution. However, the use of ultrasound in wastewater treatment has some limitations, such as high energy consumption, lengthy treatment time, limited water treatment capacity, stringent water quality requirements, and unstable treatment effects. To address these issues, the combination of enhanced ultrasound with nanotechnology is proposed and has shown great potential in wastewater treatment. Such a combination can greatly improve the efficiency of ultrasonic oxidation, resulting in an improved performance of wastewater purification. This article presents recent progress in the development of sonoactivated nanomaterials for enhanced wastewater disposal. Such nanomaterials are systematically classified and discussed. Potential challenges and future prospects of this emerging technology are also highlighted.

Efficient sonocatalytic degradation of orange II dye and real textile wastewater using peroxymonosulfate activated with a novel heterogeneous TiO2–FeZn bimetallic nanocatalyst

TiO₂–FeZn nanocatalyst combined with sonolysis were used to activate peroxymonosulfate (PMS) as a highly efficient advanced oxidation process (US/TiO₂–FeZn/PMS) for the decoloration of orange II dye (OII) and real textile wastewater. The characterization of the as-synthesized NPs was performed by SEM, FTIR, EDX and XRD analyses. Optimal experimental conditions of operational parameters were obtained: pH = 3, 15 mg/L initial OII concentration, 0.2 g/L PMS, 0.7 g/L nanocatalyst dosing, and 300 W ultrasonic power. The decolorization was observed to increase with increasing the dose of nanocatalyst and the ultrasonic power, and with decreasing pH (under acidic conditions). Under optimal experimental conditions, decolorization and COD removal of textile wastewater were 99.9% and 74.6%, respectively, at 40 min. The TiO₂–FeZn/PMS/US as a novel process exhibited a higher removal of OII (95%) than TiO₂ NPs/PMS/US process (54%). The OII removal efficiency by the different processes decreased in the following order: TiO₂–FeZn/US/PMS > TiO₂–FeZn/PMS > TiO₂–FeZn/US > TiO₂ /US/PMS > US/PMS > TiO₂–FeZn > PMS > US. The recyclability study revealed that the process could be reused up to three consecutive cycles. The current US/nanocatalyst/PMS system was concluded to be an efficient, reusable and stable nanocatalyst for the oxidation of textile dyes.

Boosting visible light photocatalysis in BiOI/BaFe12O19 magnetic heterojunction

Many previous studies have underestimated the role of magnetic components in improving photocatalytic performance. It is significance to explore the migration mechanism of photoinduced carriers in magnetic heterojunction. Here, a magnetic heterojunction, BiOI/BaFe₁₂O₁₉, was synthesized by a simple preparation method. The optimal synthesis conditions and photocatalytic reaction conditions were explored. The growth mechanism of bismuth iodide oxide (BiOI) was elaborated by introducing a micromagnetic field stemming from barium ferrite (BaFe₁₂O₁₉). The electrochemical impedance spectroscopy (EIS), Mott-Schottky curve (MS), transient fluorescence spectrometer (PL), and photocurrent response plot (i ~ t) tests indicated that the BiOI/BaFe₁₂O₁₉ possessed a higher transfer capacity of electrons, higher separation efficiency of photoinduced carriers, stronger photocurrent response, and higher carriers density, compared with pure BiOI. The ultraviolet-visible diffuse reflectance spectrophotometer (UV-vis DRS), electron paramagnetic resonance spectrometer (EPR), MS, and quenching experiments revealed band structure configuration and migration mechanism of photoinduced carriers. The enhancement mechanism of photocatalysis and photocatalytic reaction mechanism was clearly proclaimed in BiOI/BaFe₁₂O₁₉ catalytic system.

Sonocatalytic degradation of tetracycline hydrochloride with CoFe2O4/g-C3N4 composite

In this work, different mass percent ratios of CoFe₂O₄ coupled g-C₃N₄ (w%-CoFe₂O₄/g-C₃N₄, CFO/CN) nanocomposites were integrated through a hydrothermal process for the sonocatalytic eradication of tetracycline hydrochloride (TCH) from aqueous media. The prepared sonocatalysts were subjected to various techniques to investigate their morphology, crystallinity, ultrasound wave capturing activity and charge conductivity. From the investigated activity of the composite materials, it has been registered that the best sonocatalytic degradation efficiency of 26.71 % in 10 min was delivered when the amount of CoFe₂O₄ was 25% in the nanocomposite. The delivered efficiency was higher than that of bare CoFe₂O₄ and g-C₃N₄. This enriched sonocatalytic efficiency was credited to the accelerated charge transfer and separation of e^--h⁺ pair through the S-scheme heterojunctional interface. The trapping experiments confirmed that all the three species i.e. ^•OH, h⁺ and ^•O₂^- were involved in the eradication of antibiotics. A strong interaction was shown up between CoFe₂O₄ and g-C₃N₄ in the FTIR study to support charge transfer as confirmed from the photoluminescence and photocurrent analysis of the samples. This work will provide an easy approach for fabricating highly efficient low-cost magnetic sonocatalysts for the eradication of hazardous materials present in our environment.

Coal fly ash supported CoFe2O4 nanocomposites: Synergetic Fenton-like and photocatalytic degradation of methylene blue

Rapid industrialization is causing a serious threat for the environment. Therefore, this research was aimed in developing ceramic cobalt ferrite (CoFe₂O₄) nanocomposite photocatalyst coated with coal fly ash (CFA-CoFe₂O₄) using facile hydrothermal synthesis route and their applications against methylene blue. The pristine cobalt ferrite photocatalyst was also prepared, characterized, and applied for efficiency comparison. Prepared photocatalyst were characterized by X-ray diffraction (XRD), fourier transformed infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS). Optical response of catalysts was check using photoluminescence spectroscopy (PL). pH drift method was used for the surface charge characteristics of the material under acidic and basic conditions of solution pH. The photocatalytic degradation potential of all the materials were determined under ultra-violet irradiations. The influencing reaction parameters like pH, catalyst dose, oxidant dose, dye concentration, and irradiation time, were sequentially optimized to obtain best suited conditions. The 99% degradation of 10 ppm methylene blue was achieved within 60 min of reaction time under pH = 5 and 7, catalyst dose = 10 and 12 mg/100 mL, oxidant = 12 mM and 5 mM for cobalt ferrite and CFA-CoFe₂O₄ photocatalysts, respectively. Afterwards, the radical scavenging experiments were conducted to find out the effective radical scavengers (˙OH, h⁺, and e^-) in photocatalytic degradation process. The kinetic study of the process was done by applying 1st order, 2nd order, and BMG models. Statistical assessment of interaction effect among experimental variables was achieved using response surface methodology (RSM).

CoFe2O4 nanoparticles decorated onto graphene oxide and graphitic carbon nitride layers as a separable catalyst for ultrasound-assisted photocatalytic degradation of Bisphenol-A

The advanced oxidation process (AOP) through ultrasound-assisted photocatalytic degradation has attracted much attention in removing emerging contaminants. Herein, CoFe₂O₄-GO and CoFe₂O₄-g-C₃N₄ nanocomposites were synthesized using the ultrasound-assisted co-precipitation method. TEM, XRD, XPS, EDS, SEM, and FT-IR techniques characterized the structural, morphological, and chemical properties of the synthesized nanocomposites. The analyses showed that CoFe₂O₄ structure was nano-sized and distributed more homogeneously in graphene oxide (GO) layers with oxygenated functional groups than graphitic carbon nitride (g-C₃N₄). While the efficiency of composite catalysts, as photocatalysts, for degradation of bisphenol-A (BPA) was low in the visible region in the presence of persulfate, their catalytic efficacy was higher with sonolytic activation. The addition of persulfate as an oxidant remarkably enhanced the target pollutant degradation and TOC removal of BPA solution. Both composite catalysts showed 100 % BPA removal with the synergistic effect of visible region photocatalytic oxidation and sonocatalytic oxidation in the presence of persulfate at pH 6.8. In ultrasound-assisted photocatalytic oxidation of BPA, the highest mineralization efficiencies were obtained at 2 h treatment time, pH 6.8, 16 mM PS, catalyst dosages of 0.1 g/L CoFe₂O₄-GO, and 0.4 g/L CoFe₂O₄-g-C₃N₄ as 62 % and 55 %, respectively. An effective catalyst was obtained by reducing e^-/h⁺ recombination and charge transfer resistance by decorating the GO layers with CoFe₂O₄.

Fe/N-doped carbon magnetic nanocubes toward highly efficient selective decolorization of organic dyes under ultrasonic irradiation

Fe/N-doped carbon magnetic nanocubes (Fe/N-C MNCs) were feasibly fabricated through in situ thermal transformations of Prussian blue nanocubes (PB NCs) in an inert atmosphere, and the resultant composite employed as the heterogeneous noble-metal-free catalyst possessed satisfactory catalytic performance in hydrogen peroxide activation. By examining the properties of Fe/N-C MNCs, we demonstrate for the first time that the catalyst could act in synergy with ultrasonic irradiation and accelerate the selectivity of the degradation reaction of dyes. The degradation efficiency of the organic positively charged dye (methylene blue) is significantly increased after ultrasonic irradiation addition, probably owing to charge matching between a positively charged dye and the Fe/N-C MNCs. Interestingly, organic pollution degradation mainly follows a non-radical pathway. Furthermore, singlet oxygen (¹O₂) is predominantly produced by Fe/N-C MNCs on H₂O₂ activation, and it is the contributor to catalytic degradation instead of hydroxyl and/or superoxide anion radicals. Moreover, the Fe/N-C MNCs exhibit excellent stability and reusability. These findings offer interesting insights into the potential application of functional noble-metal-free materials in catalysis and wastewater remediation under ultrasonic radiation.

An organic-inorganic hybrid nanomaterial composed of a Dowson-type (NH4)6P2Mo18O62 heteropolyanion and a metal-organic framework: synthesis, characterization, and application as an effective adsorbent for the removal of organic dyes

In this work, an inorganic-organic hybrid nanomaterial, P2Mo18/MIL-101(Cr), based on Wells-Dawson-type (NH4)6P2Mo18O62 polyoxometalate (abbreviated as P2Mo18) and the MIL-101(Cr) metal-organic framework was fabricated by the reaction of (NH4)6P2Mo18O62, Cr(NO3)3·9H2O and terephthalic acid under hydrothermal conditions. The as-prepared recyclable nanohybrid was fully characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR) equipped with energy dispersive X-ray microanalysis (EDX), field emission scanning electron microscopy (FE-SEM), Raman spectroscopy and Brunauer-Emmett-Teller (BET) specific surface area studies. All the analyses confirmed the successful insertion of P2Mo18O62 6- heteropolyanion within the cavities of MIL-101(Cr). The encapsulated MIL-101(Cr) showed a considerable decrease in both pore volume and surface area compared with MIL-101(Cr) due to incorporation of the very large Dowson-type polyoxometalate into the three-dimensional porous MIL-101(Cr). The nanohybrid had a specific surface area of 800.42 m2 g-1. The adsorption efficiency of this nanohybrid for removal of methylene blue (MB), rhodamine B (RhB), and methyl orange (MO) from aqueous solutions was evaluated. Surprisingly, the composite not only presented a high adsorption capacity of 312.5 mg g-1 for MB, but also has the ability to rapidly remove 100% MB from a dye solution of 50 mg L-1 within 3 min. These results confirmed that this adsorbent is applicable in a wide pH range of 2-10. The nanohybrid showed rapid and selective adsorption for cationic MB and RhB dyes from MB/MO, MB/RhB, MO/RhB and MB/MO/RhB mixed dye solutions. The equilibrium adsorption data were better fitted by the Langmuir isotherm. Kinetics data indicate that the adsorption of the dye follows a pseudo-second order kinetics model. Also, this material could be effortlessly separated and recycled without any structural modification. Accordingly, it is an efficient adsorbent for removing cationic dyes.

Sono-assisted adsorption of organic compounds contained in industrial solution on iron nanoparticles supported on clay: Optimization using central composite design

Organic substance (O.S) in industrial phosphoric acid (IPA) solution is often tacked placed creates a major problem for IPA quality. This study was performed to assess the efficiency of Iron Intercalated Bentonite Nanoparticles (IIBN) coupled with the ultrasonic irradiation named sono-adsorption process for treating IPA 54% P₂O₅ contained O.S. XRD, SEM and BET were performed for the characterization of as-prepared adsorbent. Several conditions such as adsorbent dosage, molar ratio (OH/Fe) and time were investigated in retention experiments at acidic pH and T° of 40 ± 1 °C. The sono-assisted retention parameters were optimized by using NEMROOD software. The interaction impact of study condition on the final retention capability of the organism has been revealed by ANOVA software. Accordingly, the organic substance removal can be retained more than 83% by a sonication time of 0.5 h, absorbent dosage of 1.2 g/L and a molar ratio (OH/Fe) of 1.37. The absorbability of O.S was also evaluated by using the three parameters retention isotherms and kinetic analysis.

Sonochemical synthesis and structural characterization of an organic-inorganic nanohybrid based on a copper-dithiocarbamate complex and PMo12O403- polyanion as a novel sonocatalyst

A new organic-inorganic nanohybrid compound, ([Cu{(HOCH₂CH₂)₂NCS₂}₂]₃[PMo₁₂O₄₀] (1)), has been prepared by sonochemical technique using copper(II) dithiocarbamate complex and a Keggin-type polyoxomolybdate in this research. FT-IR, XRD, FE-SEM, TEM, EDX, UV-Vis, TGA, BET, and single crystal XRD analyses were applied to describe the properties of the composition of the nanohybrid. Compound (1) is composed of [PMo₁₂O₄₀]^3- building blocks and [Cu{(HOCH₂CH₂)₂NCS₂}₂]¹⁺ cationic moieties, and electrostatic forces and substantial hydrogen-bonding interactions were applied to pack them; and consequently, a three dimensional supramolecular framework was made based on single-crystal X-ray diffraction patterns. FE-SEM and TEM images approved the morphology of the nanohybrid sample to be extremely penetrable. Very good sonocatalytic performance is shown by this supramolecular nanohybrid in the degradation of Rhodamine B (RhB), which is a cationic organic dye. The results showed complete degradation of cationic RhB (25 mg/L) within 70 min with the rate constant of 0.039min^-1 in the presence of nanohybrid (1) and H₂O₂ (4 mmol/L). Also, sonocatalytic activity of the nanohybrid (1) was higher than H₃PMo₁₂O₄₀, showing that the combining Cu(DEDTC)₂ complex with H₃PMo₁₂O₄₀ could be an excellent choice to improve its sonocatalytic activity. The used nanohybrid (1) can be recycled after easily removing from the reaction media by centrifuging, and there was no considerable loss of catalytic activity and retention of the structure.

MIL-101(Cr)–cobalt ferrite magnetic nanocomposite: synthesis, characterization and applications for the sonocatalytic degradation of organic dye pollutants

In this study, for the first time, a novel magnetically recyclable MIL-101(Cr)/CoFe₂O₄ nanocomposite was prepared via a facile solvothermal method. The morphology, structural, magnetic and optical properties of the nanocomposite were characterized via field emission scanning electron microscopy (FE-SEM), transmission electron microscope (TEM), energy dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), UV-visible spectroscopy (UV-visible) and BET surface area analysis. Furthermore, the sonocatalytic activity of the MIL-101(Cr)-based magnetic nanocomposite was explored for the degradation of organic dye pollutants such as Rhodamine B (RhB) and methyl orange (MO) under ultrasound irradiation in the presence of H₂O₂. Under optimized conditions, the degradation efficiency reached 96% for RhB and 88% for MO. The sonocatalytic activity of MIL-101(Cr)/CoFe₂O₄ was almost 12 and 4 times higher than that of the raw MIL-101(Cr) and pure CoFe₂O₄, respectively. The improved sonocatalytic performance of the as-prepared binary nanocomposite can be attributed to the relatively high specific surface area of MIL-101(Cr) and magnetic property of CoFe₂O₄, as well as the fast generation and separation of charge carriers (electrons and holes) in MIL-101(Cr) and CoFe₂O₄. In addition, the trapping tests demonstrated that ·OH radicals are the main active species in the dye degradation process. Moreover, the most influencing factors on the sonocatalytic activity such as the H₂O₂ amount, initial dye concentration and catalyst dosage were investigated. Finally, the nanocomposite was magnetically separated and reused without any observable change in its structure and performance even after four consecutive runs.

A magnetically separable MIL-101(Cr)/CoFe₂O₄ binary nanocomposite was prepared via a hydrothermal route and applied as a sonocatalyst for the efficient degradation of organic dyes.

Fabrication of a novel magnetic CdS nanorod/NiFe2O4/NaX zeolite nanocomposite with enhanced sonocatalytic performance in the degradation of organic dyes

Herein, magnetically separable CdS nanorods (NRs)/NiFe₂O₄/NaX zeolite ternary nanocomposite was fabricated and applied for the enhanced sonocatalytic degradation of organic dyes.

Magnetic separable zeolite-type ZSM-5/CdS nanorods/MoS2 nanoflowers/MnFe2O4 quaternary nanocomposites: synthesis and application of sonocatalytic activities

Magnetic zeolite-type ZSM-5/CdS nanorods/MoS₂ nanoflowers/MnFe₂O₄ quaternary nanocomposites were synthesized and used for the sonocatalytic degradation of organic pollutants.

Synthesis and characterization of a novel manganese ferrite–metal organic framework MIL-101(Cr) nanocomposite as an efficient and magnetically recyclable sonocatalyst

A magnetic MnFe₂O₄/MIL-101(Cr) nanocomposite was synthesized and applied as a novel sonocatalyst for enhanced degradation of organic dye pollutants.

A novel CoFe2O4@Cr-MIL-101/Y zeolite ternary nanocomposite as a magnetically separable sonocatalyst for efficient sonodegradation of organic dye contaminants from water

In this research, a novel magnetic sonocatalyst nanocomposite, CoFe₂O₄@Cr-MIL-101/Y zeolite, has been successfully fabricated employing a simple hydrothermal method. The as-prepared catalyst was thoroughly identified using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), EDS elemental dot-mapping, transmission electron microscopy (TEM), atomic force microscopy (AFM), vibrating sample magnetometer (VSM), and nitrogen Brunauer–Emmett–Teller (N₂-BET) analyses. The procured CoFe₂O₄@Cr-MIL-101/Y nanocomposite was then assessed for the decomposition of three types of organic dyes namely methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) from water solution using ultrasound irradiation and subsequently monitored via UV-Vis absorption technique. The sonodecomposition reactions of organic dyes were accomplished in the presence of the H₂O₂ solution as a green oxidizing agent. Furthermore, the influence of various experimental independent factors such as irradiation time, process type, initial dye concentration, catalyst dosage, H₂O₂ concentration, scavenger type, and catalyst regeneration on the decomposition of MB, RhB and MO were surveyed. Additionally, a first order kinetic model was applied to investigate the sonodecomposition reactions of dye contaminants. The rate constant (k) and half-life (t_1/2) data were gained as 0.0675 min⁻¹ and 10.2666 min, respectively, for the decomposition of MB in the US/H₂O₂/CoFe₂O₄@Cr-MIL-101/Y system. Besides, evaluating the attained results, the distinctive performance of ˙OH as the radical scavenger originating from H₂O₂ throughout the sonodecomposition process is vividly approved.

A novel magnetically separable CoFe₂O₄@Cr-MIL-101/Y zeolite ternary nanocomposite was prepared and applied as a sonocatalyst for efficient degradation of organic contaminants.

Spinel ferrite (AFe2O4)-based heterostructured designs for lithium-ion battery, environmental monitoring, and biomedical applications

The development of spinel ferrite nanomaterial (SFN)-based hybrid architectures has become more popular owing to the fascinating physicochemical properties of SFNs, such as their good electro-optical and catalytic properties, high chemothermal stability, ease of functionalization, and superparamagnetic behaviour. Furthermore, achieving the perfect combination of SFNs and different nanomaterials has promised to open up many unique synergistic effects and advantages. Inspired by the above-mentioned noteworthy properties, numerous and varied applications have been recently developed, such as energy storage in lithium-ion batteries, environmental pollutant monitoring, and, especially, biomedical applications. In this review, recent development efforts relating to SFN-based hybrid designs are described in detail and logically, classified according to 4 major hybrid structures: SFNs/carbonaceous nanomaterials; SFNs/metal–metal oxides; SFNs/MS₂; and SFNs/other materials. The underlying advantages of the additional interactions and combinations of effects, compared to the standalone components, and the potential uses have been analyzed and assessed for each hybrid structure in relation to lithium-ion battery, environmental, and biomedical applications.

We have summarized recent developments in SFN-based hybrid designs. The additional interactions, combination effects, and important changes have been analyzed and assessed for LIB, environmental monitoring, and biomedical applications.

Efficient clean-up of waters contaminated with diazinon pesticide using photo-decomposition of peroxymonosulfate by ZnO decorated on a magnetic core/shell structure

In the present study, ZnO nanoparticles were anchored on a magnetic core/shell structure (SiO₂@Fe₃O₄) to perpetrate ZnO@SiO₂@Fe₃O₄ and then coupled with UV light as a heterogeneous nanocatalyst for activating peroxymonosulfate (PMS) into diazinon (DZ) degradation. Several techniques like XRD (X-ray diffraction), BET (Brunaeur, Emmett and Teller), TEM (Transmission electron microscope), FESEM (Field emission-scanning electron microscope) coupled with EDS (Energy Dispersive X-ray Spectrometer), PL (photoluminescence), VSM (Vibrating Sample Magnetometer) and UV-vis diffuse reflectance spectroscopy (DRS) were applied for identification of catalyst features. A possible mechanism for PMS activation and DZ degradation was proposed in details. The effect of solution pH, various concentrations of catalyst, PMS and DZ, quenching agents, different chemical oxidants and co-existing anions was assessed as operating factors to determine the optimum conditions. PMS decomposed effectively in coupling with ZnO@SiO₂@Fe₃O₄ and UV. At optimal conditions, over 95 and 56% of DZ and TOC were removed during 60 min reaction, respectively. The complete degradation of DZ was confirmed using its absorption peak in UV-vis spectra analysis over 60 min treatment. A wide variety of free radicals was identified during quenching tests. HO^• and h⁺ played a pivotal role in the degradation process of DZ. Decreasing the degradation efficiency in the presence of anions was as Cl^- > CO₃^2- > NO₃^- > PO₄^3- > SO₄^2- > HCO₃^-. A negligible amount of leaching Fe (<0.2 mg/L) was found for ZnO@SiO₂@Fe₃O₄, indicating that the catalyst possesses a high stability in oxidation systems. In addition, a significant potential was achieved in reusing of catalyst within five consecutive runs. In conclusion, ZnO@SiO₂@Fe₃O₄/PMS/UV hybrid system can be utilized as a promising advanced oxidation process into efficient degradation of pesticides, thanks to easy recovery, high catalytic activity, co-production of different reactive species and high durability and recyclability potential.

A sono-photocatalyst for humic acid removal from water: Operational parameters, kinetics and mechanism

As a precursor of disinfection byproducts, humic acid (HA) has adverse effects on aquatic environments and human health. Currently, many advanced oxidation processes (AOPs) have been proposed to remove HA from drinking water, one of which is photocatalysis. However, the long reaction time required for degradation and drawbacks of the photocatalysts limit the large-scale application of photocatalysis. Therefore, two principal objectives were achieved in this work. First regarding the technology, we combined photocatalysis with ultrasonic waves to remove HA. Second regarding the photocatalyst, quaternary Fe₃O₄/TiO₂-N-GO (FTNG) sono-photocatalysts with different amounts of Fe₃O₄ were first synthesized using a simple hydrothermal method. Characterizations were performed to confirm the successful synthesis of the sono-photocatalyst and to determine some of its properties. The influence of different experimental factors such as Fe₃O₄ content, ultrasonic power, catalyst dosage and initial HA concentration were studied. The first-order kinetic and second-order kinetic equations were used to simulate the experimental data. The results showed that FTNG-0.2 with 0.2 g of Fe₃O₄, which was added upon preparation, showed the highest sono-photocatalytic ability. In our experimental setup, greater than 99% removal efficiency (UV₂₅₄) and 94% mineralization rate (TOC) were achieved within 90 min at the optimum conditions (60 W ultrasound power and 1.0 g/L catalyst dosage for 30 mg/L HA). Compared with the pseudo-first-order kinetic model, pseudo-second-order model fitted better with the experimental data and it had higher R² values of 0.92, 0.98 and 0.98 for 30, 40 and 50 mg/L of HA, respectively. According to the scavenging tests and the ESR analysis, both of the OH and O₂^- were produced in the reaction, however, O₂^- radicals were assumed to be the dominating reactive species for the HA degradation. Moreover, after five repetitive experiments, the removal efficiency of HA can still reach 88.5%, indicating high stability of FTNG-0.2 sono-photocatalyst. The mechanism of degradation of HA by FTNG-0.2 in sono-photocatalytic system was mentioned based on several factors including the ultrasonic cavitation effect, Fenton-like reactions, photocatalytic reactions, etc. In fact, this was the first study to treat HA through sono-photocatalytic process, which showed great potential in drinking water treatment.

Efficient treatment of saline recalcitrant petrochemical wastewater using heterogeneous UV-assisted sono-Fenton process

An effective hybrid system was applied as a first report for successful treatment of recalcitrant petrochemical wastewater (PCW). In this regards, magnetic powdered activated carbon (MPAC), as a heterogeneous catalyst, was coupled with ultrasound (US) and UV irradiations for activation of H₂O₂ (marked as MPAC/US/UV/H₂O₂). Chemical oxygen demand (COD) removal ratio was evaluated with various influencing operating factors including solution pH, MPAC and H₂O₂ concentrations, US power and quenchers. A possible mechanism for catalytic degradation and generation of reactive species was proposed. To evaluate the biodegradability of both raw and treated PCWs, the activated sludge inhibition experiments were performed based on Zahn-Wellens test. MPAC indicated high catalytic activity, reusability and stability in the studied system. Over 87% of COD was removed under optimum conditions within 80 min treatment and the residual COD concentration reached 82.9 mg/L, which was permissible to discharge surface water sources based on the environmental standards. Leaching of transition metals from catalyst textural was negligible. Compared to homogeneous system (Fe²⁺/US/UV/H₂O₂), heterogeneous system (MPAC/US/UV/H₂O₂) represented a better performance in COD removal. Identification of intermediates by GC-MS showed that a wide range of recalcitrant compounds was removed and/or degraded into small molecular compounds effectively after treatment. A biodegradability ratio of 64% and the residual COD of 28 mg/L for treated PCW, indicating that the biodegradability was improved and refractory organic matters removed effectively. As conclusion, MPAC/US/UV/H₂O₂ hybrid system can be introduced as a successful advanced treatment process for efficient remediation of refractory PCWs.

A novel n-type CdS nanorods/p-type LaFeO3 heterojunction nanocomposite with enhanced visible-light photocatalytic performance

In this work, a novel n-type CdS nanorods/p-type LaFeO3 (CdS NRs/LFO) nanocomposite was prepared, for the first time, via a facile solvothermal method. The as-prepared n-CdS NRs/p-LFO nanocomposite was characterized by using powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray spectroscopy (EDX), UV-visible diffuse reflection spectroscopy (DRS), vibrating sample magnetometry (VSM), photoluminescence (PL) spectroscopy, and Brunauer-Emmett-Teller (BET) surface area analysis. All data revealed the attachment of the LFO nanoparticle on the surface of CdS NRs. This novel nanocomposite was applied as a novel visible light photocatalyst for the degradation of methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) dyes under visible-light irradiation. Under optimized conditions, the degradation efficiency was 97.5% for MB, 80% for RhB and 85% for MO in the presence of H2O2 and over CdS NRs/LFO nanocomposite. The photocatalytic activity of CdS NRs/LFO was almost 16 and 8 times as high as those of the pristine CdS NRs and pure LFO, respectively. The photocatalytic activity was enhanced mainly due to the high efficiency in separation of electron-hole pairs induced by the remarkable synergistic effects of CdS and LFO semiconductors. After the photocatalytic reaction, the nanocomposite can be easily separated from the reaction solution and reused several times without loss of its photocatalytic activity. Trapping experiments indicated that ·OH radicals were the main reactive species for dye degradation in the present photocatalytic system. On the basis of the experimental results and estimated energy band positions, the mechanism for the enhanced photocatalytic activity was proposed.

Magnetic nanocomposites decorated on multiwalled carbon nanotube for removal of Maxilon Blue 5G using the sono-Fenton method

Herein, multiwalled carbon nanotube-based Fe3O4 nano-adsorbents (Fe3O4@MWCNT) were synthesized by ultrasonic reduction method. The synthesized nano-adsorbent (Fe3O4@MWCNT) exhibited efficient sonocatalytic activity to remove Maxilon Blue 5G, a textile dye, and present in a cationic form, in aqueous solution under ultrasonic irradiation. The magnetic nano-adsorbent particles were characterized by high-resolution transmission electron microscopy (HR-TEM), transmission electron microscopy (TEM), Raman spectroscopy and X-ray diffraction (XRD). Some important parameters such as nano-adsorbent dosage, solution pH, initial dye and H2O2 concentration, reaction time, ultrasonic power and temperature were tested to determine the optimum conditions for the elimination of Maxilon Blue 5G dye. The reusability results showed that Fe3O4@MWCNT nano-adsorbent has a decrease of about 32.15% in the removal efficiency of Maxilon Blue 5G under ultrasonic irradiation after six times reuse. Additionally, in order to reveal the sufficient kinetic explanation, various experiments were performed at different temperatures and testing three kinetic models like the pseudo-first-order, pseudo-second-order and intraparticle diffusion for removal adsorption process of Maxilon Blue 5G using Fe3O4@MWCNT nano-adsorbent. The experimental kinetic results revealed that the adsorption process of Maxilon Blue 5G in the aquatic mediums using sono-Fenton method was found to be compatible with the intraparticle diffusion. Using kinetic models and studies, some activation parameters like enthalpy, entropy and Gibbs free energy for the adsorption process were calculated. The activation parameters indicated that Fe3O4@MWCNT nano-adsorbent could be used as an effective adsorbent for the removal of Maxilon Blue 5G as a textile dye and the adsorption process of Maxilon Blue 5G with Fe3O4@MWCNT nano-adsorbent is spontaneous.

Enhanced sono-photocatalysis of tetracycline antibiotic using TiO2 decorated on magnetic activated carbon (MAC@T) coupled with US and UV: A new hybrid system

A combined system including sonocatalysis and photocatalysis was applied for catalytic degradation of tetracycline (TC) antibiotic using TiO₂ decorated on magnetic activated carbon (MAC@T) in coupling with ultraviolet (UV) and ultrasound (US) irradiations. MAC was fabricated via magnetization of AC using Fe₃O₄ nanoparticles. FESEM, EDS, TEM, BET, XRD, PL, VSM and UV-visible DRS techniques were used to characterize the catalyst features. The performance of MAC@T/UV/US system was examined under impact of different input variable such as catalyst loading, solution pH, initial TC concentration, US power, scavenging agents, chemical oxidants and co-exiting anions. The degradation rate was enhanced substantially when MAC@T coupled with US and UV irradiations. At optimal conditions, over 93% TC and 50% TOC were removed under 180 min reaction. Whereas, the complete removal of TC was obtained after 60 min treatment, when MAC@T/UV/US coupled with oxidants. Decreasing sequence of the inhibitory effect of anions was chloride > bicarbonate > phosphate > nitrate > sulfate. Both Fe leaching and loss of the decontamination were slight with reused times, indicating MAC@T has a high stability and reusability. According to trapping tests, holes, OH and ¹O₂ were contributed in the degradation process. In conclusion, integration of MAC@T composite and US/UV for enhancing catalytic degradation efficiency can be introduced as a successful and promising technique, owing to excellent catalytic activity, easy recovery, good adsorption capacity and high durability and recycling potential.

Sonocatalytic removal of methylene blue from water solution by cobalt ferrite/mesoporous graphitic carbon nitride (CoFe2O4/mpg-C3N4) nanocomposites: response surface methodology approach

In this study, cobalt ferrite/mesoporous graphitic carbon nitride (CoFe₂O₄/mpg-C₃N₄) nanocomposites were successfully synthesized by using a two-step protocol. Firstly, monodispersed CoFe₂O₄ nanoparticles (NPs) were synthesized via thermal decomposition of metal precursors in a hot surfactant solution and then they were assembled on mpg-C₃N₄ via a liquid phase self-assembly method. The sonocatalytic performance of as-synthesized CoFe₂O₄/mpg-C₃N₄ nanocomposites was evaluated on the methylene blue (MB) removal from water under ultrasonic irradiation. For this purpose, response surface methodology (RSM) based on central composite design (CCD) model was successfully utilized to optimize the MB removal over CoFe₂O₄/mpg-C₃N₄ nanocomposites. Analysis of variance (ANOVA) was applied to investigate the significance of the model. The results predicted by the model were obtained to be in reasonable agreement with the experimental data (R² = 0.969, adjusted R² = 0.942). Pareto analysis demonstrated that pH of the solution was the most effective parameter on the sonocatalytic removal of MB by CoFe₂O₄/mpg-C₃N₄ nanocomposites. The optimum catalyst dose, initial dye concentration, pH, and sonication time were set as 0.25 g L^-1, 8 mg L^-1, 8, and 45 min, respectively. The high removal efficiency of MB dye (92.81%) was obtained under optimal conditions. The trapping experiments were done by using edetate disodium, tert-butyl alcohol, and benzoquinone. Among the reactive radicals, ^•OH played a more important role than h⁺ and [Formula: see text] in the MB dye removal process. Moreover, a proposed mechanism was also presented for the removal of MB in the presence of CoFe₂O₄/mpg-C₃N₄ nanocomposites under the optimized sonocatalytic conditions. Finally, a reusability test of the nanocomposites revealed a just 9.6% decrease in their removal efficiency after five consecutive runs.

Sonocatalytic performance of magnetically separable CuS/CoFe2O4 nanohybrid for efficient degradation of organic dyes

The sonocatalytic activity of the magnetic CuS/CoFe₂O₄ (CuS/CFO) nanohybrid was studied through the H₂O₂-assisted system for degradation of water soluble organic pollutants such as methylene blue (MB), rhodamine B (RhB) and methyl orange (MO). The CuS/CFO nanohybrid was fabricated at 200 °C by hydrothermal method. X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) equipped with energy dispersive X-ray microanalysis (EDX), Fourier-transform infrared spectroscopy (FT-IR), UV-Vis spectroscopy, magnetic measurements, and Brunauere-Emmette-Teller (BET) were employed for the characterizing the structure and morphology of the so-synthesized nanohybrid. Compared with sonolysis/H₂O₂, the higher degradation of MB (25 mg/L) was achieved via sonocatalytic process. The degradation efficiency of sonolysis/H₂O₂, sonocatalysis using CuS/H₂O₂, CFO/H₂O₂ and CuS/CFO/H₂O₂ systems was 6%, 62%, 23% and 100% within reaction time of 30 min for MB, respectively. The integration of H₂O₂ and catalyst dosage intensified the sonocatalytic degradation of MB. On the other hand, adding a hydroxyl radical (OH) scavenger (tert-butyl alcohol) and a hole scavenger (disodium ethylenediaminetetraacetate) decreased the degradation efficiency from 100% to 35% and 72% within 30 min, indicating the OH radicals as prominent oxidizing agent of this process. Furthermore, the magnetic property of the sample helped for easier separation of the nanohybrid, made it recyclable with a negligible decline in the performance even after four consecutive runs.

Synthesis and sonocatalytic performance of a ternary magnetic MIL-101(Cr)/RGO/ZnFe2O4 nanocomposite for degradation of dye pollutants

In this study, new ternary magnetic MIL-101(Cr)/RGO/ZnFe₂O₄ catalyst (with 30% wt of ZnFe₂O₄) was synthesized via a hydrothermal route for sonodegradation of organic dyes. The structural, optical and magnetic properties of the nanocomposite were detected by means of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV-visible spectroscopy (UV-visible), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) spectroscopy, vibrating sample magnetometer (VSM), atomic force microscopy (AFM), Raman spectroscopy and BET surface area analysis. To evaluate the sonocatalytic activity of the as-prepared MIL-101(Cr)/RGO/ZnFe₂O₄ nanocomposite, the H₂O₂-assisted degradation of organic dyes such as congo red (CR), methylene blue (MB), Rhodamine B (RhB) and methyl orange (MO) in aqueous solution was studied under ultrasound irradiation. The obtained results indicated that the ternary MIL-101(Cr)/RGO/ZnFe₂O₄ nanocomposite had better performance for sonodegradation of these dyes than MIL-101(Cr)/RGO, pure MIL-101(Cr) or ZnFe₂O₄. The enhanced sonocatalytic performance of the as-prepared ternary nanocomposite could be attributed to the fast generation and separation of charge carriers (electrons and holes) in ZnFe₂O₄and MIL-101(Cr) and their transfer to the surface of graphene sheets. Moreover, the relatively high specific surface area of the MIL-101(Cr)/rGO and magnetic property of ZnFe₂O₄ improve the degradation efficiency of the dyes. The recovery of the ternary magnetic sonocatalyst from treated water could be easily achieved using an external magnetic field. The main influence factors on the sonocatalytic activity such as catalyst dosage and dye initial concentration were also investigated. The trapping experiments indicated that OH radicals are the prominent active species in dye degradation. In addition, the reusability test, was also carried out to ensure the stability of the employed sonocatalyst.

Enhanced removal of basic violet 10 by heterogeneous sono-Fenton process using magnetite nanoparticles

The removal of basic violet 10 (BV10), which is known as a cationic dye, from aqueous solution was studied by employing a heterogeneous sono-Fenton process over the nano-sized magnetite (Fe₃O₄) which had been prepared by the milling of magnetite mineral using a high-energy planetary ball milling process. The magnetite samples were characterized using the X-ray diffraction (XRD), high resolution scanning electron microscopy (HR-SEM), energy-dispersive X-ray spectroscopy (EDX), Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FTIR), and inductively couple plasma mass spectrometer (ICP-MS). It was found that the catalytic activity of the ball-milled magnetite sample was enhanced along with the improvement in its physicochemical properties; also, the ball-milled magnetite of 6 h displayed the highest catalytic activity in BV10 removal by the heterogeneous sono-Fenton process as compared with that for 4 h (66.12% after 120 min) and 2 h (48% after 120 min).The effect of operational parameters, namely, pH solution, catalyst dosage, the initial H₂O₂ concentration, ultrasonic power and the initial BV10 concentration, on the removal efficiency (RE%) of BV10 was investigated. The optimum conditions for the BV10 RE% were: the pH value of 3, the catalyst dosage of 1.5 g L^-1, the initial H₂O₂ concentration of 36 mM, the ultrasonic power of 450 W L^-1, and the initial BV10 concentration of 30 mg L^-1. The RE% of BV10 was 75.94% at these conditions after the reaction time of 120 min. The trapping experiments revealed that OH radicals were the dominant oxidative species, but O₂^-/HO₂ radicals also had a partial role in the removal of BV10.The reusability of the magnetite nanoparticles revealed about 28% decrease in the removal efficiency within five consecutive runs. The results obtained through GC-MS analysis also confirmed the efficient removal of BV10 molecules in the aqueous solution during the process.

Heterogeneous sono-Fenton-like process using magnetic cobalt ferrite-reduced graphene oxide (CoFe2O4-rGO) nanocomposite for the removal of organic dyes from aqueous solution

We report herein the synthesis of monodisperse cobalt ferrite (CoFe₂O₄) nanoparticles (NPs) via a surfactant-assisted high temperature thermal decomposition method and then their assembly on reduced graphene oxide (rGO) to yield CoFe₂O₄-rGO nanocomposites, which displayed outstanding sonocatalytic activity for the removal of organic dyes from aqueous solutions under ultrasonic irradiation. As-prepared CoFe₂O₄-rGO nanocomposites were characterized by using transmission electron microscopy (TEM), high-resolution scanning electron microscopy (HR-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Micro-Raman spectroscopy, Vibrating sample magnetometer (VSM) and inductively couple plasma mass spectrometer (ICP-MS). To evaluate the sonocatalytic activity of the CoFe₂O₄-rGO nanocomposites, the sonocatalytic removal of several organic dyes (AO7, AR17, BR46 and BY28) was studied. The reaction conditions were optimized by studying the effects of various key operating parameters such as pH, catalyst dosage, H₂O₂ initial concentration, initial dye concentration, ultrasonic power and reaction time on the removal of AO7 dye. The maximum removal efficiency of 90.5% was achieved at pH 3 using 0.08gL^-1 catalyst, 3mM H₂O₂ and 10mgL^-1 AO7 dye under 350W ultrasonic power in 120min of reaction time span. Experimental results revealed that the kinetic of the removal process could be described using Langmuir-Hinshelwood (L-H) kinetic model. The trapping experiments showed that O₂^·- radicals constitute the major reactive oxygen species (ROS) in the AO7 dye removal process. The reusability of the nanocomposites revealed about 22% drop in the removal efficiency within five consecutive runs. A possible sonocatalytic mechanism for the removal of organic dyes was also proposed. The intermediate by-products of the dye formed in the removal process were characterized by using the GC-MS technique.

Emergence of bismuth substituted cobalt ferrite nanostructures as versatile candidates for the enhanced oxidative degradation of hazardous organic dyes

The dramatic enhancement in the catalytic performance with the incorporation of 1% bismuth into the cobalt ferrite lattice has been scrutinized for the oxidative degradation of hazardous dyes.